יצירת קמפיין שופינג

השלב הראשון בהטמעה של מודעות שופינג הוא ליצור קמפיין שופינג. קמפיינים של שופינג מאפשרים למשתמשים לראות מודעות שבהן מוצגת תמונה של המוצר, כולל שם הפריט, המחיר, שם החנות ועוד. כשיוצרים קמפיין שופינג, צריך להגדיר את התקציב, את שיטת הבידינג ואת ההגדרות של שופינג.

כדי ליצור קמפיין שופינג, צריך קודם לקשר את חשבון Google Ads לחשבון Google Merchant Center. אחרי שמקשרים את החשבונות, אפשר להשתמש במספר החשבון ב-Google Merchant Center כדי לציין את ההגדרות של שופינג.

קמפיינים רגילים לשופינג

זהו הקמפיין הנדרש ליצירת מודעות שופינג למוצרים. מודעות שופינג למוצרים מאפשרות להוסיף למודעות תמונה, כותרת, מחיר ואת שם החנות או העסק, בלי שתצטרכו ליצור מודעות ייחודיות לכל מוצר שאתם מוכרים.

אלה השלבים להגדרת קמפיין שופינג רגיל:

  1. מגדירים את הערך advertising_channel_type בקמפיין ל-SHOPPING.
  2. יוצרים ShoppingSetting, מגדירים את השדות ומוסיפים אותו לקמפיין.
  3. יוצרים שיטת בידינג כוללת או מגדירים שיטת בידינג ברמת הקמפיין.
  4. יוצרים תקציב חדש לקמפיין או מגדירים תקציב משותף קיים.

בקמפיינים רגילים לשופינג, ShoppingSetting תומך בשדות הבאים:

נדרש

merchant_id
מספר חשבון Merchant Center של החשבון שמכיל את המוצרים שברצונך לפרסם.
campaign_priority
העדיפות של קמפיין השופינג. קמפיינים עם עדיפות מספרית גבוהה יותר מקבלים עדיפות על פני קמפיינים עם עדיפות נמוכה יותר. הערכים המותרים הם בין 0 ל-2, כולל.

אופציונלי

feed_label

מחרוזת המשמשת לתווית הפיד כפי שהוגדרה ב-Merchant Center. כדאי להשתמש בשדה הזה אם רוצים לבחור מוצרים מפיד ספציפי ב-Merchant Center. אם לא מציינים זאת, הקמפיין ישתמש בכל הפידים שזמינים ב-Merchant Center.

אם השתמשתם בעבר ב-sales_country שהוצא משימוש בפורמט של קוד מדינה בן שתי אותיות (XX), צריך להשתמש במקום זאת ב-feed_label. מידע נוסף זמין במאמר התמיכה בנושא תווית פיד.

שימו לב ששליחה של קוד מדינה ב-feed_label לא מאפשרת באופן אוטומטי להציג מודעות במדינה הזו. קודם צריך להגדיר טירגוט למיקום גיאוגרפי.

enable_local

האפשרות להפעיל מודעות למוצרים שנמכרים בחנויות מקומיות בקמפיין הזה.

אפשר להגדיר שיטת בידינג בדרכים הבאות:

שיטת בידינג כוללת
שיטת בידינג אוטומטית שאפשר לשתף בין קמפיינים, קבוצות של מודעות ומילות מפתח. נוצר באמצעות BiddingStrategyService.
שיטת בידינג ברמת הקמפיין
שיטת בידינג שמוגדרת ישירות בקמפיין. הן יכולות לכלול שיטות בידינג אוטומטיות שתואמות לקמפיינים של שופינג.

בקמפיינים רגילים לשופינג, אפשר להשתמש בשיטות הבידינג הבאות:

שיטת בידינג כוללת

שיטת בידינג ברמת הקמפיין

הגדרות רשת

החל מהשבוע של 28 בפברואר 2022, קמפיינים רגילים לשופינג לא תומכים יותר בשדה network_settings.target_content_network.

אם מגדירים את השדה הזה ל-true בקמפיין שופינג רגיל בבקשת שינוי, תופיע שגיאת CANNOT_TARGET_CONTENT_NETWORK.

לפרטים נוספים, ראו שינויים בהגדרות הרשת של קמפיינים רגילים לשופינג ב-Google Ads.

הקוד לדוגמה הזה מדגים איך יוצרים קמפיין שופינג רגיל.

Java

private String addStandardShoppingCampaign(
    GoogleAdsClient googleAdsClient,
    long customerId,
    String budgetResourceName,
    long merchantCenterAccountId) {

  // Configures the shopping settings.
  ShoppingSetting shoppingSetting =
      ShoppingSetting.newBuilder()
          // Sets the priority of the campaign. Higher numbers take priority over lower numbers.
          // For Shopping product ad campaigns, allowed values are between 0 and 2, inclusive.
          .setCampaignPriority(0)
          .setMerchantId(merchantCenterAccountId)
          // Enables local inventory ads for this campaign.
          .setEnableLocal(true)
          .build();

  // Create the standard shopping campaign.
  Campaign campaign =
      Campaign.newBuilder()
          .setName("Interplanetary Cruise #" + getPrintableDateTime())
          // Configures settings related to shopping campaigns including advertising channel type
          // and shopping setting.
          .setAdvertisingChannelType(AdvertisingChannelType.SHOPPING)
          .setShoppingSetting(shoppingSetting)
          // Recommendation: Sets the campaign to PAUSED when creating it to prevent
          // the ads from immediately serving. Set to ENABLED once you've added
          // targeting and the ads are ready to serve.
          .setStatus(CampaignStatus.PAUSED)
          // Sets the bidding strategy to Manual CPC (with eCPC disabled). eCPC for standard
          // Shopping campaigns is deprecated. If eCPC is set to true, Google Ads ignores the
          // setting and behaves as if the setting was false. See this blog post for more
          // information:
          // https://ads-developers.googleblog.com/2023/09/google-ads-shopping-campaign-enhanced.html
          // Recommendation: Use one of the automated bidding strategies for Shopping campaigns
          // to help you optimize your advertising spend. More information can be found here:
          // https://support.google.com/google-ads/answer/6309029.
          .setManualCpc(ManualCpc.newBuilder().setEnhancedCpcEnabled(false).build())
          // Sets the budget.
          .setCampaignBudget(budgetResourceName)
          .build();

  // Creates a campaign operation.
  CampaignOperation operation = CampaignOperation.newBuilder().setCreate(campaign).build();

  // Issues a mutate request to add the campaign.
  try (CampaignServiceClient campaignServiceClient =
      googleAdsClient.getLatestVersion().createCampaignServiceClient()) {
    MutateCampaignsResponse response =
        campaignServiceClient.mutateCampaigns(
            Long.toString(customerId), Collections.singletonList(operation));
    MutateCampaignResult result = response.getResults(0);
    System.out.printf(
        "Added a standard shopping campaign with resource name: '%s'%n",
        result.getResourceName());
    return result.getResourceName();
  }
}

AddShoppingProductAd.java

C#

private string AddStandardShoppingCampaign(GoogleAdsClient client, long customerId,
    string budgetResourceName, long merchantCenterAccountId)
{
    // Get the CampaignService.
    CampaignServiceClient campaignService =
        client.GetService(Services.V17.CampaignService);

    // Configures the shopping settings.
    ShoppingSetting shoppingSetting = new ShoppingSetting()
    {
        // Sets the priority of the campaign. Higher numbers take priority over lower
        // numbers. For Shopping Product Ad campaigns, allowed values are between 0 and 2,
        // inclusive.
        CampaignPriority = 0,

        MerchantId = merchantCenterAccountId,

        // Enables local inventory ads for this campaign.
        EnableLocal = true
    };

    // Create the standard shopping campaign.
    Campaign campaign = new Campaign()
    {
        Name = "Interplanetary Cruise #" + ExampleUtilities.GetRandomString(),

        // Configures settings related to shopping campaigns including advertising channel
        // type and shopping setting.
        AdvertisingChannelType = AdvertisingChannelType.Shopping,

        ShoppingSetting = shoppingSetting,

        // Recommendation: Set the campaign to PAUSED when creating it to prevent
        // the ads from immediately serving. Set to ENABLED once you've added
        // targeting and the ads are ready to serve
        Status = CampaignStatus.Paused,

        // Sets the bidding strategy to Manual CPC (with eCPC disabled). eCPC for standard
        // Shopping campaigns is deprecated. If eCPC is set to true, Google Ads ignores the
        // setting and behaves as if the setting was false. See this blog post for more
        // information:
        // https://ads-developers.googleblog.com/2023/09/google-ads-shopping-campaign-enhanced.html
        // Recommendation: Use one of the automated bidding strategies for Shopping
        // campaigns to help you optimize your advertising spend. More information can be
        // found here: https://support.google.com/google-ads/answer/6309029
        ManualCpc = new ManualCpc()
        {
            EnhancedCpcEnabled = false
        },

        // Sets the budget.
        CampaignBudget = budgetResourceName
    };

    // Creates a campaign operation.
    CampaignOperation operation = new CampaignOperation()
    {
        Create = campaign
    };

    // Issues a mutate request to add the campaign.
    MutateCampaignsResponse response =
        campaignService.MutateCampaigns(customerId.ToString(),
            new CampaignOperation[] { operation });
    MutateCampaignResult result = response.Results[0];
    Console.WriteLine("Added a standard shopping campaign with resource name: '{0}'.",
        result.ResourceName);
    return result.ResourceName;
}
AddShoppingProductAd.cs

PHP

private static function addStandardShoppingCampaign(
    GoogleAdsClient $googleAdsClient,
    int $customerId,
    string $budgetResourceName,
    int $merchantCenterAccountId
) {
    // Creates a standard shopping campaign.
    $campaign = new Campaign([
        'name' => 'Interplanetary Cruise Campaign #' . Helper::getPrintableDatetime(),
        // Configures settings related to shopping campaigns including advertising channel type
        // and shopping setting.
        'advertising_channel_type' => AdvertisingChannelType::SHOPPING,
        // Configures the shopping settings.
        'shopping_setting' => new ShoppingSetting([
            // Sets the priority of the campaign. Higher numbers take priority over lower
            // numbers. For Shopping product ad campaigns, allowed values are between 0 and 2,
            // inclusive.
            'campaign_priority' => 0,
            'merchant_id' => $merchantCenterAccountId,
            // Enables local inventory ads for this campaign
            'enable_local' => true
        ]),
        // Recommendation: Set the campaign to PAUSED when creating it to prevent
        // the ads from immediately serving. Set to ENABLED once you've added
        // targeting and the ads are ready to serve.
        'status' => CampaignStatus::PAUSED,
        // Sets the bidding strategy to Manual CPC (with eCPC disabled). eCPC for standard
        // Shopping campaigns is deprecated. If eCPC is set to true, Google Ads ignores the
        // setting and behaves as if the setting was false. See this blog post for more
        // information:
        // https://ads-developers.googleblog.com/2023/09/google-ads-shopping-campaign-enhanced.html
        // Recommendation: Use one of the automated bidding strategies for Shopping campaigns
        // to help you optimize your advertising spend. More information can be found here:
        // https://support.google.com/google-ads/answer/6309029.
        'manual_cpc' => new ManualCpc(['enhanced_cpc_enabled' => false]),
        // Sets the budget.
        'campaign_budget' => $budgetResourceName
    ]);

    // Creates a campaign operation.
    $campaignOperation = new CampaignOperation();
    $campaignOperation->setCreate($campaign);

    // Issues a mutate request to add campaigns.
    $campaignServiceClient = $googleAdsClient->getCampaignServiceClient();
    $response = $campaignServiceClient->mutateCampaigns(
        MutateCampaignsRequest::build($customerId, [$campaignOperation])
    );

    /** @var Campaign $addedCampaign */
    $addedCampaign = $response->getResults()[0];
    printf(
        "Added a standard shopping campaign with resource name '%s'.%s",
        $addedCampaign->getResourceName(),
        PHP_EOL
    );

    return $addedCampaign->getResourceName();
}
AddShoppingProductAd.php

Python

def add_standard_shopping_campaign(
    client, customer_id, budget_resource_name, merchant_center_account_id
):
    """Creates a new standard shopping campaign in the specified client account."""
    campaign_service = client.get_service("CampaignService")

    # Create standard shopping campaign.
    campaign_operation = client.get_type("CampaignOperation")
    campaign = campaign_operation.create
    campaign.name = f"Interplanetary Cruise Campaign {uuid.uuid4()}"

    # Configures settings related to shopping campaigns including advertising
    # channel type and shopping setting.
    campaign.advertising_channel_type = (
        client.enums.AdvertisingChannelTypeEnum.SHOPPING
    )
    campaign.shopping_setting.merchant_id = merchant_center_account_id

    # Sets the priority of the campaign. Higher numbers take priority over lower
    # numbers. For standard shopping campaigns, allowed values are between 0 and
    # 2, inclusive.
    campaign.shopping_setting.campaign_priority = 0

    # Enables local inventory ads for this campaign.
    campaign.shopping_setting.enable_local = True

    # Recommendation: Set the campaign to PAUSED when creating it to prevent the
    # ads from immediately serving. Set to ENABLED once you've added targeting
    # and the ads are ready to serve.
    campaign.status = client.enums.CampaignStatusEnum.PAUSED

    # Sets the bidding strategy to Manual CPC (with eCPC disabled). eCPC for
    # standard Shopping campaigns is deprecated. If eCPC is set to true, Google
    # Ads ignores the setting and behaves as if the setting was false. See this
    # blog post for more information:
    # https://ads-developers.googleblog.com/2023/09/google-ads-shopping-campaign-enhanced.html
    # Recommendation: Use one of the automated bidding strategies for Shopping
    # campaigns to help you optimize your advertising spend. More information
    # can be found here: https://support.google.com/google-ads/answer/6309029
    campaign.manual_cpc.enhanced_cpc_enabled = False

    # Sets the budget.
    campaign.campaign_budget = budget_resource_name

    # Add the campaign.
    campaign_response = campaign_service.mutate_campaigns(
        customer_id=customer_id, operations=[campaign_operation]
    )

    campaign_resource_name = campaign_response.results[0].resource_name

    print(
        "Added a standard shopping campaign with resource name "
        f"'{campaign_resource_name}'."
    )

    return campaign_resource_name
add_shopping_product_ad.py

Ruby

def add_standard_shopping_campaign(
    client, customer_id, budget_name, merchant_center_id)

  operation = client.operation.create_resource.campaign do |campaign|
    campaign.name = "Interplanetary Cruise Campaign ##{(Time.new.to_f * 1000).to_i}"

    # Shopping campaign specific settings
    campaign.advertising_channel_type = :SHOPPING

    campaign.shopping_setting = client.resource.shopping_setting do |shopping_setting|
      shopping_setting.merchant_id = merchant_center_id
      shopping_setting.campaign_priority = 0
      shopping_setting.enable_local = true
    end

    campaign.status = :PAUSED

    # Sets the bidding strategy to Manual CPC (with eCPC disabled). eCPC for standard
    # Shopping campaigns is deprecated. If eCPC is set to true, Google Ads ignores the
    # setting and behaves as if the setting was false. See this blog post for more
    # information:
    # https://ads-developers.googleblog.com/2023/09/google-ads-shopping-campaign-enhanced.html
    campaign.manual_cpc = client.resource.manual_cpc do |manual_cpc|
      manual_cpc.enhanced_cpc_enabled = false
    end

    campaign.campaign_budget = budget_name
  end

  service = client.service.campaign
  response = service.mutate_campaigns(
    customer_id: customer_id,
    operations: [operation],
  )

  campaign_name = response.results.first.resource_name

  puts "Added a standard shopping campaign with resource name #{campaign_name}."

  campaign_name
end
add_shopping_product_ad.rb

Perl

sub add_standard_shopping_campaign {
  my ($api_client, $customer_id, $budget_resource_name,
    $merchant_center_account_id)
    = @_;

  # Create a standard shopping campaign.
  my $campaign = Google::Ads::GoogleAds::V17::Resources::Campaign->new({
      name => "Interplanetary Cruise Campaign #" . uniqid(),
      # Configure settings related to shopping campaigns including advertising
      # channel type and shopping setting.
      advertisingChannelType => SHOPPING,
      shoppingSetting        =>
        Google::Ads::GoogleAds::V17::Resources::ShoppingSetting->new({
          merchantId => $merchant_center_account_id,
          # Set the priority of the campaign. Higher numbers take priority over
          # lower numbers. For standard shopping campaigns, allowed values are
          # between 0 and 2, inclusive.
          campaignPriority => 0,
          # Enable local inventory ads for this campaign.
          enableLocal => "true"
        }
        ),
      # Recommendation: Set the campaign to PAUSED when creating it to prevent
      # the ads from immediately serving. Set to ENABLED once you've added
      # targeting and the ads are ready to serve.
      status => Google::Ads::GoogleAds::V17::Enums::CampaignStatusEnum::PAUSED,
      # Set the bidding strategy to Manual CPC (with eCPC disabled). eCPC for
      # standard Shopping campaigns is deprecated. If eCPC is set to true,
      # Google Ads ignores the setting and behaves as if the setting was false.
      # See this blog post for more information:
      # https://ads-developers.googleblog.com/2023/09/google-ads-shopping-campaign-enhanced.html
      # Recommendation: Use one of the automated bidding strategies for shopping
      # campaigns to help you optimize your advertising spend. More information
      # can be found here: https://support.google.com/google-ads/answer/6309029.
      manualCpc => Google::Ads::GoogleAds::V17::Common::ManualCpc->new(
        {enhancedCpcEnabled => "false"}
      ),
      # Set the budget.
      campaignBudget => $budget_resource_name
    });

  # Create a campaign operation.
  my $campaign_operation =
    Google::Ads::GoogleAds::V17::Services::CampaignService::CampaignOperation->
    new({create => $campaign});

  # Add the campaign.
  my $campaign_resource_name = $api_client->CampaignService()->mutate({
      customerId => $customer_id,
      operations => [$campaign_operation]})->{results}[0]{resourceName};

  printf "Added a standard shopping campaign with resource name: '%s'.\n",
    $campaign_resource_name;

  return $campaign_resource_name;
}
add_shopping_product_ad.pl

קמפיינים חכמים לשופינג

הקודם
קישור אל Merchant Center
הבא
יצירת קבוצת מודעות