カスタマー マッチの利用を開始する

カスタマー マッチでは、オンラインやオフラインのデータを使用してユーザーにリーチおよび再アプローチできます Google 検索、ショッピング タブ、Gmail、YouTube、 ディスプレイ。顧客から共有された情報を使用して、 ターゲット ユーザーにターゲットを絞って広告を表示しましょう。Google Chat では 顧客管理（CRM）データの一括アップロード、追加、削除 ユーザーのリストを使用して logical_user_list。

オーディエンス管理を確認する 概要 をご覧ください。 ユーザーリストのその他のオプションです

Customer 一致とオーディエンス ターゲティングをご覧ください。

前提条件

すべてのアカウントでカスタマー マッチをご利用いただけるわけではありません。カスタマーマッチを使用するには アカウントには以下が必要です。

• 良好なポリシー準拠の実績
• 良好なお支払いの実績

アカウントがどの要件を満たすかに応じて、 できます。カスタマー マッチについて ポリシーをご確認ください 要件と制限事項があります。

統合を設計する

使用フロー

顧客リストを作成してターゲティングする際のおすすめのフローは次のとおりです。

1. 空の顧客リストを作成します。

2. OfflineUserDataJob を作成します。です。 1 つの大規模なジョブを作成する方が、複数のジョブを 実現します。

   Google Ads API のバージョン v15 以降では、 consent フィールド /customer_match_user_list_metadata OfflineUserDataJob create リクエスト。remove リクエストの場合、同意は必要ありません。API 返品 OfflineUserDataJobError.CUSTOMER_NOT_ACCEPTED_CUSTOMER_DATA_TERMS ジョブの consent.ad_user_data または consent.ad_personalization が設定されている場合 DENIED に送信します。

   ユーザーが同意を拒否した場合、 remove オペレーションを使用して、ユーザーリストからユーザーの識別子を削除します。

   特定のユーザーの同意が得られていない場合は、 ジョブの consent フィールドを設定しない場合、 customer_match_user_list_metadata] を選択し、それらのユーザーの識別子を追加します。 その個別のジョブにcreateオペレーションを使用します

3. OfflineUserDataJobService.AddOfflineUserDataJobOperations メソッドを呼び出します。1 回の呼び出しで合計 10,000 個までの ID を追加することをおすすめします 最適な処理を実現します単一の AddOfflineUserDataJobOperations リクエスト すべての ID で最大 100,000 個の ID を オペレーション リストの UserData オブジェクト。

   たとえば、各 UserData オブジェクトに 1 つの UserIdentifier が hashed_email と別の UserIdentifier が hashed_phone_number で、 リクエストごとに 5,000 個の UserData オブジェクトを送信することが最適です。 には合計 10,000 個のユーザー ID が含まれます。

4. すべてのオペレーションが追加されるか、ジョブが追加されるまで、前の手順を繰り返します できます。1 つの行に追加できるオペレーションの数に制限はありません。 単一のジョブただし、1 ジョブあたりのオペレーションは 1,000,000 回以下にすることをおすすめします。 最適な処理を実現します

5. ジョブを実行します。

6. アップロードの成功をポーリングします。

7. マッチ率を確認します。

8. リストをターゲティングします。

OfflineUserDataJobService と UserDataService

カスタマー マッチのデータをアップロードできるサービスは 2 つあります。[ サービスに制限がある場合があります。

ベスト プラクティス

カスタマー マッチを設計する際は、次のベスト プラクティスに留意してください 統合:

• 複数のアカウントを使って 1 つのユーザーリストを変更しようとしないでください。ユーザー Google 広告またはデータによってのみ変更できます。 パートナー アカウントを 作成しました。

• 1 対 1 のオペレーションと AddOfflineUserDataJobOperationsRequest、最大 100,000 個の識別子。 回避 RESOURCE_EXHAUSTED 表示されます。

• 同じエンティティ内で create オペレーションと remove オペレーションを混在させないでください。 OfflineUserDataJob。これにより、 結果に CONFLICTING_OPERATION エラーが発生します。

• partial_failure を AddOfflineUserDataJobOperationsRequest 問題のあるオペレーションを検出できます。 オペレーションは、Cloud Storage バケットに OfflineUserDataJob。

• 複数のマシンを同時に実行しない OfflineUserDataJob は、 同じユーザー リスト（つまり、 CustomerMatchUserListMetadata.user_list 同じリソース名を指します。変更すると、 CONCURRENT_MODIFICATION 同じリストに対して複数のジョブを同時に操作することは許可されていないため、 できます。このエラーは、他の Google Cloud リソースの Google 広告の管理画面と Google Ads API を使ってリストを変更する。ただし、 オペレーションを PENDING ジョブ。ジョブの開始前であれば、いつでも実行できます。

• 適用するオペレーションが数千ある場合は、1 つ作成する すべてのオペレーションを含む OfflineUserDataJob。複数作成しない 各ジョブを数百のオペレーションで 順番に実行したり できます。1 つの大規模ジョブですべてのオペレーションを処理しても、 作業効率が高まり、作業効率が低下します。 ワークフロー内のエラーを検出できます

顧客リストを活用して最適なターゲティングを行う方法については、 ヘルプセンターをご覧ください。

顧客リストを作成する

まず最初に UserListService。顧客リストが作成される [ crm_based_user_list フィールド user_list オブジェクト。crm_based_user_list フィールドは、キャンペーン タイプで設定できます。 次のような機能が用意されています

crm_based_user_list には次の 3 つのフィールドがあります。

• app_id: 配信元のモバイルアプリを一意に識別する文字列 データを収集しました。これは、CrmBasedUserList を作成するときは必須です。 モバイル広告 ID のアップロード

• upload_key_type: リストの一致するキーの型。CONTACT_INFO、CRM_ID、または MOBILE_ADVERTISING_ID。同じリスト内でデータ型を混在させることはできません。 このフィールドは、すべての顧客リストで必須です。

• data_source_type: リストのデータソース。デフォルト値は FIRST_PARTY です。許可リスト登録済み サードパーティ調達の顧客リストを作成できます。

membership_life_span ユーザー リストの属性を使用すると、 ユーザーがリストに含まれるようにできます。顧客リストのタイプでは 有効期限がないことを示すには、membership_life_span を 10,000 にします。

membership_status 属性 は、リストに新規ユーザーを許可するかどうかを定義します。

private String createCustomerMatchUserList(GoogleAdsClient googleAdsClient, long customerId) {
  // Creates the new user list.
  UserList userList =
      UserList.newBuilder()
          .setName("Customer Match list #" + getPrintableDateTime())
          .setDescription("A list of customers that originated from email addresses")
          // Customer Match user lists can use a membership life span of 10,000 to indicate
          // unlimited; otherwise normal values apply.
          // Sets the membership life span to 30 days.
          .setMembershipLifeSpan(30)
          // Sets the upload key type to indicate the type of identifier that will be used to
          // add users to the list. This field is immutable and required for a CREATE operation.
          .setCrmBasedUserList(
              CrmBasedUserListInfo.newBuilder()
                  .setUploadKeyType(CustomerMatchUploadKeyType.CONTACT_INFO))
          .build();

  // Creates the operation.
  UserListOperation operation = UserListOperation.newBuilder().setCreate(userList).build();

  // Creates the service client.
  try (UserListServiceClient userListServiceClient =
      googleAdsClient.getLatestVersion().createUserListServiceClient()) {
    // Adds the user list.
    MutateUserListsResponse response =
        userListServiceClient.mutateUserLists(
            Long.toString(customerId), ImmutableList.of(operation));
    // Prints the response.
    System.out.printf(
        "Created Customer Match user list with resource name: %s.%n",
        response.getResults(0).getResourceName());
    return response.getResults(0).getResourceName();
  }
}
AddCustomerMatchUserList.java
      

private string CreateCustomerMatchUserList(GoogleAdsClient client, long customerId)
{
    // Get the UserListService.
    UserListServiceClient service = client.GetService(Services.V17.UserListService);

    // Creates the user list.
    UserList userList = new UserList()
    {
        Name = $"Customer Match list# {ExampleUtilities.GetShortRandomString()}",
        Description = "A list of customers that originated from email and physical" +
            " addresses",
        // Customer Match user lists can use a membership life span of 10000 to
        // indicate unlimited; otherwise normal values apply.
        // Sets the membership life span to 30 days.
        MembershipLifeSpan = 30,
        CrmBasedUserList = new CrmBasedUserListInfo()
        {
            UploadKeyType = CustomerMatchUploadKeyType.ContactInfo
        }
    };
    // Creates the user list operation.
    UserListOperation operation = new UserListOperation()
    {
        Create = userList
    };

    // Issues a mutate request to add the user list and prints some information.
    MutateUserListsResponse response = service.MutateUserLists(
        customerId.ToString(), new[] { operation });
    string userListResourceName = response.Results[0].ResourceName;
    Console.WriteLine($"User list with resource name '{userListResourceName}' " +
        $"was created.");
    return userListResourceName;
}
AddCustomerMatchUserList.cs
      

private static function createCustomerMatchUserList(
    GoogleAdsClient $googleAdsClient,
    int $customerId
): string {
    // Creates the user list.
    $userList = new UserList([
        'name' => 'Customer Match list #' . Helper::getPrintableDatetime(),
        'description' => 'A list of customers that originated from email '
            . 'and physical addresses',
        // Customer Match user lists can use a membership life span of 10000 to
        // indicate unlimited; otherwise normal values apply.
        // Sets the membership life span to 30 days.
        'membership_life_span' => 30,
        'crm_based_user_list' => new CrmBasedUserListInfo([
            // Sets the upload key type to indicate the type of identifier that will be used to
            // add users to the list. This field is immutable and required for a CREATE
            // operation.
            'upload_key_type' => CustomerMatchUploadKeyType::CONTACT_INFO
        ])
    ]);

    // Creates the user list operation.
    $operation = new UserListOperation();
    $operation->setCreate($userList);

    // Issues a mutate request to add the user list and prints some information.
    $userListServiceClient = $googleAdsClient->getUserListServiceClient();
    $response = $userListServiceClient->mutateUserLists(
        MutateUserListsRequest::build($customerId, [$operation])
    );
    $userListResourceName = $response->getResults()[0]->getResourceName();
    printf("User list with resource name '%s' was created.%s", $userListResourceName, PHP_EOL);

    return $userListResourceName;
}
AddCustomerMatchUserList.php
      

def create_customer_match_user_list(client, customer_id):
    """Creates a Customer Match user list.

    Args:
        client: The Google Ads client.
        customer_id: The ID for the customer that owns the user list.

    Returns:
        The string resource name of the newly created user list.
    """
    # Creates the UserListService client.
    user_list_service_client = client.get_service("UserListService")

    # Creates the user list operation.
    user_list_operation = client.get_type("UserListOperation")

    # Creates the new user list.
    user_list = user_list_operation.create
    user_list.name = f"Customer Match list #{uuid.uuid4()}"
    user_list.description = (
        "A list of customers that originated from email and physical addresses"
    )
    # Sets the upload key type to indicate the type of identifier that is used
    # to add users to the list. This field is immutable and required for a
    # CREATE operation.
    user_list.crm_based_user_list.upload_key_type = (
        client.enums.CustomerMatchUploadKeyTypeEnum.CONTACT_INFO
    )
    # Customer Match user lists can set an unlimited membership life span;
    # to do so, use the special life span value 10000. Otherwise, membership
    # life span must be between 0 and 540 days inclusive. See:
    # https://developers.devsite.corp.google.com/google-ads/api/reference/rpc/latest/UserList#membership_life_span
    # Sets the membership life span to 30 days.
    user_list.membership_life_span = 30

    response = user_list_service_client.mutate_user_lists(
        customer_id=customer_id, operations=[user_list_operation]
    )
    user_list_resource_name = response.results[0].resource_name
    print(
        f"User list with resource name '{user_list_resource_name}' was created."
    )

    return user_list_resource_name
add_customer_match_user_list.py
      

def create_customer_match_user_list(client, customer_id)
  # Creates the user list.
  operation = client.operation.create_resource.user_list do |ul|
    ul.name = "Customer Match List #{(Time.new.to_f * 1000).to_i}"
    ul.description = "A list of customers that originated from email and " \
      "physical addresses"
    # Customer Match user lists can use a membership life span of 10000 to
    # indicate unlimited; otherwise normal values apply.
    # Sets the membership life span to 30 days.
    ul.membership_life_span = 30
    ul.crm_based_user_list = client.resource.crm_based_user_list_info do |crm|
      crm.upload_key_type = :CONTACT_INFO
    end
  end

  # Issues a mutate request to add the user list and prints some information.
  response = client.service.user_list.mutate_user_lists(
    customer_id: customer_id,
    operations: [operation],
  )

  # Prints out some information about the newly created user list.
  resource_name = response.results.first.resource_name
  puts "User list with resource name #{resource_name} was created."

  resource_name
end
add_customer_match_user_list.rb
      

sub create_customer_match_user_list {
  my ($api_client, $customer_id) = @_;

  # Create the user list.
  my $user_list = Google::Ads::GoogleAds::V17::Resources::UserList->new({
      name        => "Customer Match list #" . uniqid(),
      description =>
        "A list of customers that originated from email and physical addresses",
      # Customer Match user lists can use a membership life span of 10000 to
      # indicate unlimited; otherwise normal values apply.
      # Set the membership life span to 30 days.
      membershipLifeSpan => 30,
      # Set the upload key type to indicate the type of identifier that will be
      # used to add users to the list. This field is immutable and required for
      # a CREATE operation.
      crmBasedUserList =>
        Google::Ads::GoogleAds::V17::Common::CrmBasedUserListInfo->new({
          uploadKeyType => CONTACT_INFO
        })});

  # Create the user list operation.
  my $user_list_operation =
    Google::Ads::GoogleAds::V17::Services::UserListService::UserListOperation->
    new({
      create => $user_list
    });

  # Issue a mutate request to add the user list and print some information.
  my $user_lists_response = $api_client->UserListService()->mutate({
      customerId => $customer_id,
      operations => [$user_list_operation]});
  my $user_list_resource_name =
    $user_lists_response->{results}[0]{resourceName};
  printf "User list with resource name '%s' was created.\n",
    $user_list_resource_name;

  return $user_list_resource_name;
}
add_customer_match_user_list.pl
      

顧客データを追加

主な照合キーは、メールアドレス、送付先住所、電話番号の 3 つです。 あります。ユーザー ID とモバイル デバイス ID を照合キーとして使用できますが、 ソリューションは Cookie とデバイスに依存しているため、将来性が低い あります。ユーザーの連絡先情報（メールアドレス、 送付先住所、電話番号（可能な場合は CRM やモバイルの代わりに） あります。

各ユーザーリストに含められる顧客データは、 CrmBasedUserListInfo.upload_key_type 表示されます。さらに、UserData オブジェクトは、 は 1 人のユーザーを表し、最大 20 個のユーザー ID を含めることができます。 独自の UserIdentifier オブジェクトがあります。20 個を超える識別子があると、 TOO_MANY_USER_IDENTIFIERS エラーが発生します。

Google 広告では、以下の条件を満たす場合にのみ、カスタマー マッチ ユーザーリストがターゲティングに使用されます。 広告配信時点でのアクティブ ユーザー数の最小しきい値アクティブ ユーザーは リストに登録されていて、Gmail、検索、YouTube、 ディスプレイ。少なくとも 5,000 人のメンバーをアップロードすると、十分な数のメンバーがいる可能性が高まります。 アクティブユーザー数を ターゲティングの基準にできます

ユーザーの連絡先情報をアップロードする

ユーザーのメールアドレス、送付先住所、電話番号をアップロードするには、 upload_key_type から CONTACT_INFO に変更。連絡先情報は 照合できるようにするには、Google アカウントに関連付けられている アカウント（Google Workspace など）をターゲットにすることはできません。

プライバシーに関する懸念の場合: メールアドレス、姓、名、電話番号 数値は、アップロードする前に SHA-256 アルゴリズムでハッシュ化する必要があります。イン ハッシュ結果を標準化してから これらの値のいずれかをハッシュ化します 次の作業を行ってください。

• 先頭と末尾の空白文字を削除する。
• 名前、メールアドレス、住所の場合: テキストを小文字に変換します。
• 電話番号の場合: 各電話番号を E164 に変換します。 の形式にする必要があります。この形式は、 + で始まる 15 桁までの電話番号の電話番号 +12125650000 や +442070313000 のように指定します。先頭の + 省略できます。

メールアドレスの場合、先頭にあるピリオド（.）をすべて削除する必要はありません。 gmail.com と googlemail.com 個のメールアドレスにドメイン名が含まれています。 使用できます。

ハッシュ化前の連絡先情報の形式が正しくない場合、API ハッシュ化された情報を受け入れても、顧客と照合することはできません。

送付先住所のデータをアップロードする場合は、少なくとも次の項目を含める必要があります。

• 国コード
• 郵便番号
• ハッシュ化された名前（名）
• ハッシュ化された姓

これらの項目のいずれかが欠けている場合、住所は一致しません。

顧客リストに含めることができる upload_key_type は 1 つのみですが、複数種類の CONTACT_INFO 件中 upload_key_type 件の連絡先情報をアップロードできます。 この方法はマッチ率を高めるためにおすすめします。

CRM ID をアップロード

顧客リストに CRM ID を追加するには、upload_key_type を CRM_ID。 CRM ID は、広告主によって生成されて割り当てられたユーザー ID から照合されます。 これは MOBILE_ADVERTISING_ID インスタンスのアップロードに似ていますが、 UserIdentifier オブジェクトの third_party_user_id フィールドに入力します。

モバイル ID をアップロード

メールアドレスを使用したカスタマー マッチと同様に、 モバイル デバイスの広告識別子（IDFA）または Google 広告 ID（AAID） あります。これを行うには、app_id を指定します。 プロパティを指定し、upload_key_type を MOBILE_ADVERTISING_ID モバイル デバイス ID によるカスタマー マッチにユーザーリストを使用する前。

サンプルコード

次の例では、OfflineUserDataJobOperation を使用して顧客情報を追加します。 連絡先情報を顧客リストに追加します。

// Creates a raw input list of unhashed user information, where each element of the list
// represents a single user and is a map containing a separate entry for the keys "email",
// "phone", "firstName", "lastName", "countryCode", and "postalCode". In your application, this
// data might come from a file or a database.
List<Map<String, String>> rawRecords = new ArrayList<>();
// The first user data has an email address and a phone number.
Map<String, String> rawRecord1 =
    ImmutableMap.<String, String>builder()
        .put("email", "dana@example.com")
        // Phone number to be converted to E.164 format, with a leading '+' as required. This
        // includes whitespace that will be removed later.
        .put("phone", "+1 800 5550101")
        .build();
// The second user data has an email address, a mailing address, and a phone number.
Map<String, String> rawRecord2 =
    ImmutableMap.<String, String>builder()
        // Email address that includes a period (.) before the domain.
        .put("email", "alex.2@example.com")
        // Address that includes all four required elements: first name, last name, country
        // code, and postal code.
        .put("firstName", "Alex")
        .put("lastName", "Quinn")
        .put("countryCode", "US")
        .put("postalCode", "94045")
        // Phone number to be converted to E.164 format, with a leading '+' as required.
        .put("phone", "+1 800 5550102")
        .build();
// The third user data only has an email address.
Map<String, String> rawRecord3 =
    ImmutableMap.<String, String>builder().put("email", "charlie@example.com").build();
// Adds the raw records to the raw input list.
rawRecords.add(rawRecord1);
rawRecords.add(rawRecord2);
rawRecords.add(rawRecord3);

// Iterates over the raw input list and creates a UserData object for each record.
List<UserData> userDataList = new ArrayList<>();
for (Map<String, String> rawRecord : rawRecords) {
  // Creates a builder for the UserData object that represents a member of the user list.
  UserData.Builder userDataBuilder = UserData.newBuilder();
  // Checks if the record has email, phone, or address information, and adds a SEPARATE
  // UserIdentifier object for each one found. For example, a record with an email address and a
  // phone number will result in a UserData with two UserIdentifiers.

  // IMPORTANT: Since the identifier attribute of UserIdentifier
  // (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier) is a
  // oneof
  // (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must set only ONE of
  // hashedEmail, hashedPhoneNumber, mobileId, thirdPartyUserId, or addressInfo. Setting more
  // than one of these attributes on the same UserIdentifier will clear all the other members
  // of the oneof. For example, the following code is INCORRECT and will result in a
  // UserIdentifier with ONLY a hashedPhoneNumber.
  //
  // UserIdentifier incorrectlyPopulatedUserIdentifier =
  //     UserIdentifier.newBuilder()
  //         .setHashedEmail("...")
  //         .setHashedPhoneNumber("...")
  //         .build();
  //
  // The separate 'if' statements below demonstrate the correct approach for creating a UserData
  // for a member with multiple UserIdentifiers.

  // Checks if the record has an email address, and if so, adds a UserIdentifier for it.
  if (rawRecord.containsKey("email")) {
    UserIdentifier hashedEmailIdentifier =
        UserIdentifier.newBuilder()
            .setHashedEmail(normalizeAndHash(sha256Digest, rawRecord.get("email"), true))
            .build();
    // Adds the hashed email identifier to the UserData object's list.
    userDataBuilder.addUserIdentifiers(hashedEmailIdentifier);
  }

  // Checks if the record has a phone number, and if so, adds a UserIdentifier for it.
  if (rawRecord.containsKey("phone")) {
    UserIdentifier hashedPhoneNumberIdentifier =
        UserIdentifier.newBuilder()
            .setHashedPhoneNumber(normalizeAndHash(sha256Digest, rawRecord.get("phone"), true))
            .build();
    // Adds the hashed phone number identifier to the UserData object's list.
    userDataBuilder.addUserIdentifiers(hashedPhoneNumberIdentifier);
  }

  // Checks if the record has all the required mailing address elements, and if so, adds a
  // UserIdentifier for the mailing address.
  if (rawRecord.containsKey("firstName")) {
    // Checks if the record contains all the other required elements of a mailing address.
    Set<String> missingAddressKeys = new HashSet<>();
    for (String addressKey : new String[] {"lastName", "countryCode", "postalCode"}) {
      if (!rawRecord.containsKey(addressKey)) {
        missingAddressKeys.add(addressKey);
      }
    }

    if (!missingAddressKeys.isEmpty()) {
      System.out.printf(
          "Skipping addition of mailing address information because the following required keys"
              + " are missing: %s%n",
          missingAddressKeys);
    } else {
      // Creates an OfflineUserAddressInfo object that contains all the required elements of a
      // mailing address.
      OfflineUserAddressInfo addressInfo =
          OfflineUserAddressInfo.newBuilder()
              .setHashedFirstName(
                  normalizeAndHash(sha256Digest, rawRecord.get("firstName"), false))
              .setHashedLastName(
                  normalizeAndHash(sha256Digest, rawRecord.get("lastName"), false))
              .setCountryCode(rawRecord.get("countryCode"))
              .setPostalCode(rawRecord.get("postalCode"))
              .build();
      UserIdentifier addressIdentifier =
          UserIdentifier.newBuilder().setAddressInfo(addressInfo).build();
      // Adds the address identifier to the UserData object's list.
      userDataBuilder.addUserIdentifiers(addressIdentifier);
    }
  }

  if (!userDataBuilder.getUserIdentifiersList().isEmpty()) {
    // Builds the UserData and adds it to the list.
    userDataList.add(userDataBuilder.build());
  }
}

// Creates the operations to add users.
List<OfflineUserDataJobOperation> operations = new ArrayList<>();
for (UserData userData : userDataList) {
  operations.add(OfflineUserDataJobOperation.newBuilder().setCreate(userData).build());
}
AddCustomerMatchUserList.java
      

// Creates a raw input list of unhashed user information, where each element of the list
// represents a single user and is a map containing a separate entry for the keys
// "email", "phone", "firstName", "lastName", "countryCode", and "postalCode".
// In your application, this data might come from a file or a database.
List<Dictionary<string, string>> rawRecords = new List<Dictionary<string, string>>();

// The first user data has an email address and a phone number.
Dictionary<string, string> rawRecord1 = new Dictionary<string, string>();
rawRecord1.Add("email", "dana@example.com");
// Phone number to be converted to E.164 format, with a leading '+' as required.
// This includes whitespace that will be removed later.
rawRecord1.Add("phone", "+1 800 5550101");

// The second user data has an email address, a mailing address, and a phone number.
Dictionary<string, string> rawRecord2 = new Dictionary<string, string>();
// Email address that includes a period (.) before the Gmail domain.
rawRecord2.Add("email", "alex.2@example.com");
// Address that includes all four required elements: first name, last name, country
// code, and postal code.
rawRecord2.Add("firstName", "Alex");
rawRecord2.Add("lastName", "Quinn");
rawRecord2.Add("countryCode", "US");
rawRecord2.Add("postalCode", "94045");
// Phone number to be converted to E.164 format, with a leading '+' as required.
// This includes whitespace that will be removed later.
rawRecord2.Add("phone", "+1 800 5550102");

// The third user data only has an email address.
Dictionary<string, string> rawRecord3 = new Dictionary<string, string>();
rawRecord3.Add("email", "charlie@example.com");

// Adds the raw records to the raw input list.
rawRecords.Add(rawRecord1);
rawRecords.Add(rawRecord2);
rawRecords.Add(rawRecord3);

// Iterates over the raw input list and creates a UserData object for each record.
List<UserData> userDataList = new List<UserData>();
foreach (Dictionary<string, string> rawRecord in rawRecords) {
    // Creates a UserData object that represents a member of the user list.
    UserData userData = new UserData();
    // Checks if the record has email, phone, or address information, and adds a
    // SEPARATE UserIdentifier object for each one found.
    // For example, a record with an email address and a phone number will result in a
    // UserData with two UserIdentifiers.

    // IMPORTANT: Since the identifier attribute of UserIdentifier
    // (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier)
    // is a oneof
    // (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must set
    // only ONE of hashedEmail, hashedPhoneNumber, mobileId, thirdPartyUserId,
    // or addressInfo.
    // Setting more than one of these attributes on the same UserIdentifier will clear
    // all the other members of the oneof.
    // For example, the following code is INCORRECT and will result in a UserIdentifier
    // with ONLY a hashedPhoneNumber.
    //
    // UserIdentifier incorrectlyPopulatedUserIdentifier = new UserIdentifier()
    // {
    //      HashedEmail = "...",
    //      HashedPhoneNumber = "..."
    // };
    //
    // The separate 'if' statements below demonstrate the correct approach for creating
    // a UserData for a member with multiple UserIdentifiers.

    // Checks if the record has an email address, and if so, adds a UserIdentifier
    // for it.
    if (rawRecord.ContainsKey("email")) {
        UserIdentifier hashedEmailIdentifier = new UserIdentifier()
        {
            HashedEmail = NormalizeAndHash(rawRecord["email"], true)
        };

        userData.UserIdentifiers.Add(hashedEmailIdentifier);
    }

    // Checks if the record has a phone number, and if so, adds a UserIdentifier for it.
    if (rawRecord.ContainsKey("phone")) {
        UserIdentifier hashedPhoneNumberIdentifier = new UserIdentifier()
        {
            HashedPhoneNumber = NormalizeAndHash(rawRecord["phone"], true)
        };

        // Adds the hashed phone number identifier to the UserData object's list.
        userData.UserIdentifiers.Add(hashedPhoneNumberIdentifier);
    }

    // Checks if the record has all the required mailing address elements, and if so,
    // adds a UserIdentifier for the mailing address.
    if (rawRecord.ContainsKey("firstName")) {
        // Checks if the record contains all the other required elements of a mailing
        // address.
        HashSet<string> missingAddressKeys = new HashSet<string>();
        foreach (string addressKey in new string[] {"lastName", "countryCode",
            "postalCode"}) {
        if (!rawRecord.ContainsKey(addressKey)) {
            missingAddressKeys.Add(addressKey);
        }
        }

        if (!missingAddressKeys.Any()) {
        Console.WriteLine(
            $"Skipping addition of mailing address information because the following " +
                "required keys are missing: {missingAddressKeys}");
        } else {
            // Creates an OfflineUserAddressInfo object that contains all the required
            // elements of a mailing address.
            OfflineUserAddressInfo addressInfo = new OfflineUserAddressInfo()
            {
                HashedFirstName = NormalizeAndHash(rawRecord["firstName"]),
                HashedLastName = NormalizeAndHash(rawRecord["lastName"]),
                CountryCode = rawRecord["countryCode"],
                PostalCode = rawRecord["postalCode"]
            };

            UserIdentifier addressIdentifier = new UserIdentifier()
            {
                AddressInfo = addressInfo
            };

            // Adds the address identifier to the UserData object's list.
            userData.UserIdentifiers.Add(addressIdentifier);
        }
    }

    if (userData.UserIdentifiers.Any())
    {
        userDataList.Add(userData);
    }
}

// Creates the operations to add the users.
List<OfflineUserDataJobOperation> operations = new List<OfflineUserDataJobOperation>();
foreach(UserData userData in userDataList)
{
    operations.Add(new OfflineUserDataJobOperation()
    {
        Create = userData
    });
}
AddCustomerMatchUserList.cs
      

// Creates a raw input list of unhashed user information, where each element of the list
// represents a single user and is a map containing a separate entry for the keys 'email',
// 'phone', 'firstName', 'lastName', 'countryCode', and 'postalCode'. In your application,
// this data might come from a file or a database.
$rawRecords = [];
// The first user data has an email address and a phone number.
$rawRecord1 = [
    // The first user data has an email address and a phone number.
    'email' => 'dana@example.com',
    // Phone number to be converted to E.164 format, with a leading '+' as required. This
    // includes whitespace that will be removed later.
    'phone' => '+1 800 5550101'
];
$rawRecords[] = $rawRecord1;

// The second user data has an email address, a mailing address, and a phone number.
$rawRecord2 = [
    // Email address that includes a period (.) before the Gmail domain.
    'email' => 'alex.2@example.com',
    // Address that includes all four required elements: first name, last name, country
    // code, and postal code.
    'firstName' => 'Alex',
    'lastName' => 'Quinn',
    'countryCode' => 'US',
    'postalCode' => '94045',
    // Phone number to be converted to E.164 format, with a leading '+' as required.
    'phone' => '+1 800 5550102',
];
$rawRecords[] = $rawRecord2;

// The third user data only has an email address.
$rawRecord3 = ['email' => 'charlie@example.com'];
$rawRecords[] = $rawRecord3;

// Iterates over the raw input list and creates a UserData object for each record.
$userDataList = [];
foreach ($rawRecords as $rawRecord) {
    // Checks if the record has email, phone, or address information, and adds a SEPARATE
    // UserIdentifier object for each one found. For example, a record with an email address
    // and a phone number will result in a UserData with two UserIdentifiers.

    // IMPORTANT: Since the identifier attribute of UserIdentifier
    // (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier) is
    // a oneof
    // (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must set only
    // ONE of 'hashed_email, 'hashed_phone_number', 'mobile_id', 'third_party_user_id', or
    // 'address_info'.
    // Setting more than one of these attributes on the same UserIdentifier will clear all
    // the other members of the oneof. For example, the following code is INCORRECT and will
    // result in a UserIdentifier with ONLY a 'hashed_phone_number'.
    //
    // $incorrectlyPopulatedUserIdentifier = new UserIdentifier();
    // $incorrectlyPopulatedUserIdentifier->setHashedEmail('...');
    // $incorrectlyPopulatedUserIdentifier->setHashedPhoneNumber('...');
    //
    // The separate 'if' statements below demonstrate the correct approach for creating a
    // UserData for a member with multiple UserIdentifiers.

    $userIdentifiers = [];
    // Checks if the record has an email address, and if so, adds a UserIdentifier for it.
    if (array_key_exists('email', $rawRecord)) {
        $hashedEmailIdentifier = new UserIdentifier([
            'hashed_email' => self::normalizeAndHash($rawRecord['email'], true)
        ]);
        // Adds the hashed email identifier to the user identifiers list.
        $userIdentifiers[] = $hashedEmailIdentifier;
    }

    // Checks if the record has a phone number, and if so, adds a UserIdentifier for it.
    if (array_key_exists('phone', $rawRecord)) {
        $hashedPhoneNumberIdentifier = new UserIdentifier([
            'hashed_phone_number' => self::normalizeAndHash($rawRecord['phone'], true)
        ]);
        // Adds the hashed email identifier to the user identifiers list.
        $userIdentifiers[] = $hashedPhoneNumberIdentifier;
    }

    // Checks if the record has all the required mailing address elements, and if so, adds a
    // UserIdentifier for the mailing address.
    if (array_key_exists('firstName', $rawRecord)) {
        // Checks if the record contains all the other required elements of a mailing
        // address.
        $missingAddressKeys = [];
        foreach (['lastName', 'countryCode', 'postalCode'] as $addressKey) {
            if (!array_key_exists($addressKey, $rawRecord)) {
                $missingAddressKeys[] = $addressKey;
            }
        }
        if (!empty($missingAddressKeys)) {
            printf(
                "Skipping addition of mailing address information because the "
                . "following required keys are missing: %s%s",
                json_encode($missingAddressKeys),
                PHP_EOL
            );
        } else {
            // Creates an OfflineUserAddressInfo object that contains all the required
            // elements of a mailing address.
            $addressIdentifier = new UserIdentifier([
               'address_info' => new OfflineUserAddressInfo([
                   'hashed_first_name' => self::normalizeAndHash(
                       $rawRecord['firstName'],
                       false
                   ),
                   'hashed_last_name' => self::normalizeAndHash(
                       $rawRecord['lastName'],
                       false
                   ),
                   'country_code' => $rawRecord['countryCode'],
                   'postal_code' => $rawRecord['postalCode']
               ])
            ]);
            // Adds the address identifier to the user identifiers list.
            $userIdentifiers[] = $addressIdentifier;
        }
    }
    if (!empty($userIdentifiers)) {
        // Builds the UserData and adds it to the list.
        $userDataList[] = new UserData(['user_identifiers' => $userIdentifiers]);
    }
}

// Creates the operations to add users.
$operations = array_map(
    function (UserData $userData) {
        return new OfflineUserDataJobOperation(['create' => $userData]);
    },
    $userDataList
);
AddCustomerMatchUserList.php
      

def build_offline_user_data_job_operations(client):
    """Creates a raw input list of unhashed user information.

    Each element of the list represents a single user and is a dict containing a
    separate entry for the keys "email", "phone", "first_name", "last_name",
    "country_code", and "postal_code". In your application, this data might come
    from a file or a database.

    Args:
        client: The Google Ads client.

    Returns:
        A list containing the operations.
    """
    # The first user data has an email address and a phone number.
    raw_record_1 = {
        "email": "dana@example.com",
        # Phone number to be converted to E.164 format, with a leading '+' as
        # required. This includes whitespace that will be removed later.
        "phone": "+1 800 5550101",
    }

    # The second user data has an email address, a mailing address, and a phone
    # number.
    raw_record_2 = {
        # Email address that includes a period (.) before the email domain.
        "email": "alex.2@example.com",
        # Address that includes all four required elements: first name, last
        # name, country code, and postal code.
        "first_name": "Alex",
        "last_name": "Quinn",
        "country_code": "US",
        "postal_code": "94045",
        # Phone number to be converted to E.164 format, with a leading '+' as
        # required.
        "phone": "+1 800 5550102",
    }

    # The third user data only has an email address.
    raw_record_3 = {"email": "charlie@example.com"}

    # Adds the raw records to a raw input list.
    raw_records = [raw_record_1, raw_record_2, raw_record_3]

    operations = []
    # Iterates over the raw input list and creates a UserData object for each
    # record.
    for record in raw_records:
        # Creates a UserData object that represents a member of the user list.
        user_data = client.get_type("UserData")

        # Checks if the record has email, phone, or address information, and
        # adds a SEPARATE UserIdentifier object for each one found. For example,
        # a record with an email address and a phone number will result in a
        # UserData with two UserIdentifiers.

        # IMPORTANT: Since the identifier attribute of UserIdentifier
        # (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier)
        # is a oneof
        # (https://protobuf.dev/programming-guides/proto3/#oneof-features), you
        # must set only ONE of hashed_email, hashed_phone_number, mobile_id,
        # third_party_user_id, or address-info. Setting more than one of these
        # attributes on the same UserIdentifier will clear all the other members
        # of the oneof. For example, the following code is INCORRECT and will
        # result in a UserIdentifier with ONLY a hashed_phone_number:

        # incorrect_user_identifier = client.get_type("UserIdentifier")
        # incorrect_user_identifier.hashed_email = "..."
        # incorrect_user_identifier.hashed_phone_number = "..."

        # The separate 'if' statements below demonstrate the correct approach
        # for creating a UserData object for a member with multiple
        # UserIdentifiers.

        # Checks if the record has an email address, and if so, adds a
        # UserIdentifier for it.
        if "email" in record:
            user_identifier = client.get_type("UserIdentifier")
            user_identifier.hashed_email = normalize_and_hash(
                record["email"], True
            )
            # Adds the hashed email identifier to the UserData object's list.
            user_data.user_identifiers.append(user_identifier)

        # Checks if the record has a phone number, and if so, adds a
        # UserIdentifier for it.
        if "phone" in record:
            user_identifier = client.get_type("UserIdentifier")
            user_identifier.hashed_phone_number = normalize_and_hash(
                record["phone"], True
            )
            # Adds the hashed phone number identifier to the UserData object's
            # list.
            user_data.user_identifiers.append(user_identifier)

        # Checks if the record has all the required mailing address elements,
        # and if so, adds a UserIdentifier for the mailing address.
        if "first_name" in record:
            required_keys = ("last_name", "country_code", "postal_code")
            # Checks if the record contains all the other required elements of
            # a mailing address.
            if not all(key in record for key in required_keys):
                # Determines which required elements are missing from the
                # record.
                missing_keys = record.keys() - required_keys
                print(
                    "Skipping addition of mailing address information "
                    "because the following required keys are missing: "
                    f"{missing_keys}"
                )
            else:
                user_identifier = client.get_type("UserIdentifier")
                address_info = user_identifier.address_info
                address_info.hashed_first_name = normalize_and_hash(
                    record["first_name"], False
                )
                address_info.hashed_last_name = normalize_and_hash(
                    record["last_name"], False
                )
                address_info.country_code = record["country_code"]
                address_info.postal_code = record["postal_code"]
                user_data.user_identifiers.append(user_identifier)

        # If the user_identifiers repeated field is not empty, create a new
        # OfflineUserDataJobOperation and add the UserData to it.
        if user_data.user_identifiers:
            operation = client.get_type("OfflineUserDataJobOperation")
            operation.create = user_data
            operations.append(operation)
add_customer_match_user_list.py
      

# Create a list of unhashed user data records that we will format in the
# following steps to prepare for the API.
raw_records = [
  # The first user data has an email address and a phone number.
  {
    email: 'dana@example.com',
    # Phone number to be converted to E.164 format, with a leading '+' as
    # required. This includes whitespace that will be removed later.
    phone: '+1 800 5550100',
  },
  # The second user data has an email address, a phone number, and an address.
  {
    # Email address that includes a period (.) before the Gmail domain.
    email: 'alex.2@example.com',
    # Address that includes all four required elements: first name, last
    # name, country code, and postal code.
    first_name: 'Alex',
    last_name: 'Quinn',
    country_code: 'US',
    postal_code: '94045',
    # Phone number to be converted to E.164 format, with a leading '+' as
    # required.
    phone: '+1 800 5550102',
  },
  # The third user data only has an email address.
  {
    email: 'charlie@example.com',
  },
]

# Create a UserData for each entry in the raw records.
user_data_list = raw_records.map do |record|
  client.resource.user_data do |data|
    if record[:email]
      data.user_identifiers << client.resource.user_identifier do |ui|
        ui.hashed_email = normalize_and_hash(record[:email], true)
      end
    end
    if record[:phone]
      data.user_identifiers << client.resource.user_identifier do |ui|
        ui.hashed_phone_number = normalize_and_hash(record[:phone], true)
      end
    end
    if record[:first_name]
      # Check that we have all the required information.
      missing_keys = [:last_name, :country_code, :postal_code].reject {|key|
        record[key].nil?
      }
      if missing_keys.empty?
        # If nothing is missing, add the address.
        data.user_identifiers << client.resource.user_identifier do |ui|
          ui.address_identifier = client.resource.offline_user_address_info do |address|
            address.hashed_first_name = normalize_and_hash(record[:first_name])
            address.hashed_last_name = normalize_and_hash(record[:last_name])
            address.country_code = record[:country_code]
            address.postal_code = record[:postal_code]
          end
        end
      else
        # If some data is missing, skip this entry.
        puts "Skipping addition of mailing information because the following keys are missing:" \
          "#{missing_keys}"
      end
    end
  end
end

operations = user_data_list.map do |user_data|
  client.operation.create_resource.offline_user_data_job(user_data)
end
add_customer_match_user_list.rb
      

  # The first user data has an email address and a phone number.
  my $raw_record_1 = {
    email => 'dana@example.com',
    # Phone number to be converted to E.164 format, with a leading '+' as
    # required. This includes whitespace that will be removed later.
    phone => '+1 800 5550101',
  };

  # The second user data has an email address, a mailing address, and a phone
  # number.
  my $raw_record_2 = {
    # Email address that includes a period (.) before the Gmail domain.
    email => 'alex.2@example.com',
    # Address that includes all four required elements: first name, last
    # name, country code, and postal code.
    firstName   => 'Alex',
    lastName    => 'Quinn',
    countryCode => 'US',
    postalCode  => '94045',
    # Phone number to be converted to E.164 format, with a leading '+' as
    # required.
    phone => '+1 800 5550102',
  };

  # The third user data only has an email address.
  my $raw_record_3 = {email => 'charlie@example.com',};

  my $raw_records = [$raw_record_1, $raw_record_2, $raw_record_3];

  my $operations = [];
  foreach my $record (@$raw_records) {
    # Check if the record has email, phone, or address information, and adds a
    # SEPARATE UserIdentifier object for each one found. For example, a record
    # with an email address and a phone number will result in a UserData with two
    # UserIdentifiers.
    #
    # IMPORTANT: Since the identifier attribute of UserIdentifier
    # (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier)
    # is a oneof
    # (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must set
    # only ONE of hashed_email, hashed_phone_number, mobile_id, third_party_user_id,
    # or address-info. Setting more than one of these attributes on the same UserIdentifier
    # will clear all the other members of the oneof. For example, the following code is
    # INCORRECT and will result in a UserIdentifier with ONLY a hashed_phone_number:
    #
    # my $incorrect_user_identifier = Google::Ads::GoogleAds::V17::Common::UserIdentifier->new({
    #   hashedEmail => '...',
    #   hashedPhoneNumber => '...',
    # });
    #
    # The separate 'if' statements below demonstrate the correct approach for creating a
    # UserData object for a member with multiple UserIdentifiers.

    my $user_identifiers = [];

    # Check if the record has an email address, and if so, add a UserIdentifier for it.
    if (defined $record->{email}) {
      # Add the hashed email identifier to the list of UserIdentifiers.
      push(
        @$user_identifiers,
        Google::Ads::GoogleAds::V17::Common::UserIdentifier->new({
            hashedEmail => normalize_and_hash($record->{email}, 1)}));
    }

    # Check if the record has a phone number, and if so, add a UserIdentifier for it.
    if (defined $record->{phone}) {
      # Add the hashed phone number identifier to the list of UserIdentifiers.
      push(
        @$user_identifiers,
        Google::Ads::GoogleAds::V17::Common::UserIdentifier->new({
            hashedPhoneNumber => normalize_and_hash($record->{phone}, 1)}));
    }

    # Check if the record has all the required mailing address elements, and if so, add
    # a UserIdentifier for the mailing address.
    if (defined $record->{firstName}) {
      my $required_keys = ["lastName", "countryCode", "postalCode"];
      my $missing_keys  = [];

      foreach my $key (@$required_keys) {
        if (!defined $record->{$key}) {
          push(@$missing_keys, $key);
        }
      }

      if (@$missing_keys) {
        print
"Skipping addition of mailing address information because the following"
          . "keys are missing: "
          . join(",", @$missing_keys);
      } else {
        push(
          @$user_identifiers,
          Google::Ads::GoogleAds::V17::Common::UserIdentifier->new({
              addressInfo =>
                Google::Ads::GoogleAds::V17::Common::OfflineUserAddressInfo->
                new({
                  # First and last name must be normalized and hashed.
                  hashedFirstName => normalize_and_hash($record->{firstName}),
                  hashedLastName  => normalize_and_hash($record->{lastName}),
                  # Country code and zip code are sent in plain text.
                  countryCode => $record->{countryCode},
                  postalCode  => $record->{postalCode},
                })}));
      }
    }

    # If the user_identifiers array is not empty, create a new
    # OfflineUserDataJobOperation and add the UserData to it.
    if (@$user_identifiers) {
      my $user_data = Google::Ads::GoogleAds::V17::Common::UserData->new({
          userIdentifiers => [$user_identifiers]});
      push(
        @$operations,
        Google::Ads::GoogleAds::V17::Services::OfflineUserDataJobService::OfflineUserDataJobOperation
          ->new({
            create => $user_data
          }));
    }
  }
add_customer_match_user_list.pl
      

リストのアップロード率と一致率を確認する

OfflineUserDataJob が SUCCESS を取得したら、 ステータスに基づき、推定マッチ率 については、 operation_metadata.match_rate_range 表示されます。ジョブが完了する前にこのフィールドにクエリを実行すると、このフィールドの値が ゼロである場合がありますマッチ率を検証してリストの準備を整えるには ジョブを完了するためにポーリングすることをおすすめします。この処理には 10 分から最大 24 時間でジョブが完了します。

private void checkJobStatus(
    GoogleAdsClient googleAdsClient, long customerId, String offlineUserDataJobResourceName) {
  try (GoogleAdsServiceClient googleAdsServiceClient =
      googleAdsClient.getLatestVersion().createGoogleAdsServiceClient()) {
    String query =
        String.format(
            "SELECT offline_user_data_job.resource_name, "
                + "offline_user_data_job.id, "
                + "offline_user_data_job.status, "
                + "offline_user_data_job.type, "
                + "offline_user_data_job.failure_reason, "
                + "offline_user_data_job.customer_match_user_list_metadata.user_list "
                + "FROM offline_user_data_job "
                + "WHERE offline_user_data_job.resource_name = '%s'",
            offlineUserDataJobResourceName);
    // Issues the query and gets the GoogleAdsRow containing the job from the response.
    GoogleAdsRow googleAdsRow =
        googleAdsServiceClient
            .search(Long.toString(customerId), query)
            .iterateAll()
            .iterator()
            .next();
    OfflineUserDataJob offlineUserDataJob = googleAdsRow.getOfflineUserDataJob();
    System.out.printf(
        "Offline user data job ID %d with type '%s' has status: %s%n",
        offlineUserDataJob.getId(), offlineUserDataJob.getType(), offlineUserDataJob.getStatus());
    OfflineUserDataJobStatus jobStatus = offlineUserDataJob.getStatus();
    if (OfflineUserDataJobStatus.SUCCESS == jobStatus) {
      // Prints information about the user list.
      printCustomerMatchUserListInfo(
          googleAdsClient,
          customerId,
          offlineUserDataJob.getCustomerMatchUserListMetadata().getUserList());
    } else if (OfflineUserDataJobStatus.FAILED == jobStatus) {
      System.out.printf("  Failure reason: %s%n", offlineUserDataJob.getFailureReason());
    } else if (OfflineUserDataJobStatus.PENDING == jobStatus
        || OfflineUserDataJobStatus.RUNNING == jobStatus) {
      System.out.println();
      System.out.printf(
          "To check the status of the job periodically, use the following GAQL query with"
              + " GoogleAdsService.search:%n%s%n",
          query);
    }
  }
}
AddCustomerMatchUserList.java
      

private static void CheckJobStatusAndPrintResults(GoogleAdsClient client, long customerId,
    string offlineUserDataJobResourceName)
{
    // Get the GoogleAdsService.
    GoogleAdsServiceClient service = client.GetService(Services.V17.GoogleAdsService);

    string query = "SELECT offline_user_data_job.resource_name, " +
        "offline_user_data_job.id, offline_user_data_job.status, " +
        "offline_user_data_job.type, offline_user_data_job.failure_reason " +
        "offline_user_data_job.customer_match_user_list_metadata_user_list " +
        "FROM offline_user_data_job WHERE " +
        $"offline_user_data_job.resource_name = '{offlineUserDataJobResourceName}'";

    // Issues the query and gets the GoogleAdsRow containing the job from the response.
    GoogleAdsRow googleAdsRow = service.Search(customerId.ToString(), query).First();

    OfflineUserDataJob offlineUserDataJob = googleAdsRow.OfflineUserDataJob;
    Console.WriteLine($"Offline user data job ID {offlineUserDataJob.Id} with type " +
        $"'{offlineUserDataJob.Type}' has status: {offlineUserDataJob.Status}");

    switch (offlineUserDataJob.Status)
    {
        case OfflineUserDataJobStatus.Success:
            // Prints information about the user list.
            PrintCustomerMatchUserListInfo(client, customerId,
                offlineUserDataJob.CustomerMatchUserListMetadata.UserList);
            break;

        case OfflineUserDataJobStatus.Failed:
            Console.WriteLine($"  Failure reason: {offlineUserDataJob.FailureReason}");
            break;

        case OfflineUserDataJobStatus.Pending:
        case OfflineUserDataJobStatus.Running:
            Console.WriteLine("To check the status of the job periodically, use the " +
                $"following GAQL query with GoogleAdsService.search:\n\n{query}");
            break;
    }
}
AddCustomerMatchUserList.cs
      

private static function checkJobStatus(
    GoogleAdsClient $googleAdsClient,
    int $customerId,
    string $offlineUserDataJobResourceName
) {
    $googleAdsServiceClient = $googleAdsClient->getGoogleAdsServiceClient();

    // Creates a query that retrieves the offline user data job.
    $query = "SELECT offline_user_data_job.resource_name, "
          . "offline_user_data_job.id, "
          . "offline_user_data_job.status, "
          . "offline_user_data_job.type, "
          . "offline_user_data_job.failure_reason, "
          . "offline_user_data_job.customer_match_user_list_metadata.user_list "
          . "FROM offline_user_data_job "
          . "WHERE offline_user_data_job.resource_name = '$offlineUserDataJobResourceName'";

    // Issues a search request to get the GoogleAdsRow containing the job from the response.
    /** @var GoogleAdsRow $googleAdsRow */
    $googleAdsRow =
        $googleAdsServiceClient->search(SearchGoogleAdsRequest::build($customerId, $query))
            ->getIterator()
            ->current();
    $offlineUserDataJob = $googleAdsRow->getOfflineUserDataJob();

    // Prints out some information about the offline user data job.
    $offlineUserDataJobStatus = $offlineUserDataJob->getStatus();
    printf(
        "Offline user data job ID %d with type '%s' has status: %s.%s",
        $offlineUserDataJob->getId(),
        OfflineUserDataJobType::name($offlineUserDataJob->getType()),
        OfflineUserDataJobStatus::name($offlineUserDataJobStatus),
        PHP_EOL
    );

    if ($offlineUserDataJobStatus === OfflineUserDataJobStatus::SUCCESS) {
        // Prints information about the user list.
        self::printCustomerMatchUserListInfo(
            $googleAdsClient,
            $customerId,
            $offlineUserDataJob->getCustomerMatchUserListMetadata()->getUserList()
        );
    } elseif ($offlineUserDataJobStatus === OfflineUserDataJobStatus::FAILED) {
        printf("  Failure reason: %s.%s", $offlineUserDataJob->getFailureReason(), PHP_EOL);
    } elseif (
        $offlineUserDataJobStatus === OfflineUserDataJobStatus::PENDING
        || $offlineUserDataJobStatus === OfflineUserDataJobStatus::RUNNING
    ) {
        printf(
            '%1$sTo check the status of the job periodically, use the following GAQL query with'
            . ' GoogleAdsService.search:%1$s%2$s%1$s',
            PHP_EOL,
            $query
        );
    }
}
AddCustomerMatchUserList.php
      

def check_job_status(client, customer_id, offline_user_data_job_resource_name):
    """Retrieves, checks, and prints the status of the offline user data job.

    If the job is completed successfully, information about the user list is
    printed. Otherwise, a GAQL query will be printed, which can be used to
    check the job status at a later date.

    Offline user data jobs may take 6 hours or more to complete, so checking the
    status periodically, instead of waiting, can be more efficient.

    Args:
        client: The Google Ads client.
        customer_id: The ID for the customer that owns the user list.
        offline_user_data_job_resource_name: The resource name of the offline
            user data job to get the status of.
    """
    query = f"""
        SELECT
          offline_user_data_job.resource_name,
          offline_user_data_job.id,
          offline_user_data_job.status,
          offline_user_data_job.type,
          offline_user_data_job.failure_reason,
          offline_user_data_job.customer_match_user_list_metadata.user_list
        FROM offline_user_data_job
        WHERE offline_user_data_job.resource_name =
          '{offline_user_data_job_resource_name}'
        LIMIT 1"""

    # Issues a search request using streaming.
    google_ads_service = client.get_service("GoogleAdsService")
    results = google_ads_service.search(customer_id=customer_id, query=query)
    offline_user_data_job = next(iter(results)).offline_user_data_job
    status_name = offline_user_data_job.status.name
    user_list_resource_name = (
        offline_user_data_job.customer_match_user_list_metadata.user_list
    )

    print(
        f"Offline user data job ID '{offline_user_data_job.id}' with type "
        f"'{offline_user_data_job.type_.name}' has status: {status_name}"
    )

    if status_name == "SUCCESS":
        print_customer_match_user_list_info(
            client, customer_id, user_list_resource_name
        )
    elif status_name == "FAILED":
        print(f"\tFailure Reason: {offline_user_data_job.failure_reason}")
    elif status_name in ("PENDING", "RUNNING"):
        print(
            "To check the status of the job periodically, use the following "
            f"GAQL query with GoogleAdsService.Search: {query}"
        )
add_customer_match_user_list.py
      

def check_job_status(client, customer_id, offline_user_data_job)
  query = <<~QUERY
    SELECT
      offline_user_data_job.id,
      offline_user_data_job.status,
      offline_user_data_job.type,
      offline_user_data_job.failure_reason,
      offline_user_data_job.customer_match_user_list_metadata.user_list
    FROM
      offline_user_data_job
    WHERE
      offline_user_data_job.resource_name = '#{offline_user_data_job}'
  QUERY

  row = client.service.google_ads.search(
    customer_id: customer_id,
    query: query,
  ).first

  job = row.offline_user_data_job
  puts "Offline user data job ID #{job.id} with type '#{job.type}' has status: #{job.status}."

  case job.status
  when :SUCCESS
    print_customer_match_user_list(client, customer_id, job.customer_match_user_list_metadata.user_list)
  when :FAILED
    puts "  Failure reason: #{job.failure_reason}"
  else
    puts "  To check the status of the job periodically, use the following GAQL " \
      "query with GoogleAdsService.search:"
    puts query
  end
end
add_customer_match_user_list.rb
      

sub check_job_status() {
  my ($api_client, $customer_id, $offline_user_data_job_resource_name) = @_;

  my $search_query =
    "SELECT offline_user_data_job.resource_name, " .
    "offline_user_data_job.id, offline_user_data_job.status, " .
    "offline_user_data_job.type, offline_user_data_job.failure_reason, " .
    "offline_user_data_job.customer_match_user_list_metadata.user_list " .
    "FROM offline_user_data_job " .
    "WHERE offline_user_data_job.resource_name = " .
    "$offline_user_data_job_resource_name LIMIT 1";

  my $search_request =
    Google::Ads::GoogleAds::V17::Services::GoogleAdsService::SearchGoogleAdsRequest
    ->new({
      customerId => $customer_id,
      query      => $search_query
    });

  # Get the GoogleAdsService.
  my $google_ads_service = $api_client->GoogleAdsService();

  my $iterator = Google::Ads::GoogleAds::Utils::SearchGoogleAdsIterator->new({
    service => $google_ads_service,
    request => $search_request
  });

  # The results have exactly one row.
  my $google_ads_row        = $iterator->next;
  my $offline_user_data_job = $google_ads_row->{offlineUserDataJob};
  my $status                = $offline_user_data_job->{status};

  printf
    "Offline user data job ID %d with type %s has status: %s.\n",
    $offline_user_data_job->{id},
    $offline_user_data_job->{type},
    $status;

  if ($status eq SUCCESS) {
    print_customer_match_user_list_info($api_client, $customer_id,
      $offline_user_data_job->{customerMatchUserListMetadata}{userList});
  } elsif ($status eq FAILED) {
    print "Failure reason: $offline_user_data_job->{failure_reason}";
  } elsif (grep /$status/, (PENDING, RUNNING)) {
    print
      "To check the status of the job periodically, use the following GAQL " .
      "query with the GoogleAdsService->search() method:\n$search_query\n";
  }

  return 1;
}
add_customer_match_user_list.pl
      

リストサイズを確認するには、 user_list リソース。

try (GoogleAdsServiceClient googleAdsServiceClient =
    googleAdsClient.getLatestVersion().createGoogleAdsServiceClient()) {
  // Creates a query that retrieves the user list.
  String query =
      String.format(
          "SELECT user_list.size_for_display, user_list.size_for_search "
              + "FROM user_list "
              + "WHERE user_list.resource_name = '%s'",
          userListResourceName);

  // Constructs the SearchGoogleAdsStreamRequest.
  SearchGoogleAdsStreamRequest request =
      SearchGoogleAdsStreamRequest.newBuilder()
          .setCustomerId(Long.toString(customerId))
          .setQuery(query)
          .build();

  // Issues the search stream request.
  ServerStream<SearchGoogleAdsStreamResponse> stream =
      googleAdsServiceClient.searchStreamCallable().call(request);
AddCustomerMatchUserList.java
      

 // Get the GoogleAdsService.
 GoogleAdsServiceClient service =
     client.GetService(Services.V17.GoogleAdsService);

 // Creates a query that retrieves the user list.
 string query =
     "SELECT user_list.size_for_display, user_list.size_for_search " +
     "FROM user_list " +
     $"WHERE user_list.resource_name = '{userListResourceName}'";
 // Issues a search stream request.
 service.SearchStream(customerId.ToString(), query,
    delegate (SearchGoogleAdsStreamResponse resp)
    {
        // Display the results.
        foreach (GoogleAdsRow userListRow in resp.Results)
        {
            UserList userList = userListRow.UserList;
            Console.WriteLine("The estimated number of users that the user list " +
                $"'{userList.ResourceName}' has is {userList.SizeForDisplay}" +
                $" for Display and {userList.SizeForSearch} for Search.");
        }
    }
);
AddCustomerMatchUserList.cs
      

$googleAdsServiceClient = $googleAdsClient->getGoogleAdsServiceClient();

// Creates a query that retrieves the user list.
$query =
    "SELECT user_list.size_for_display, user_list.size_for_search " .
    "FROM user_list " .
    "WHERE user_list.resource_name = '$userListResourceName'";

// Issues a search stream request.
/** @var GoogleAdsServerStreamDecorator $stream */
$stream = $googleAdsServiceClient->searchStream(
    SearchGoogleAdsStreamRequest::build($customerId, $query)
);
AddCustomerMatchUserList.php
      

googleads_service_client = client.get_service("GoogleAdsService")

# Creates a query that retrieves the user list.
query = f"""
    SELECT
      user_list.size_for_display,
      user_list.size_for_search
    FROM user_list
    WHERE user_list.resource_name = '{user_list_resource_name}'"""

# Issues a search request.
search_results = googleads_service_client.search(
    customer_id=customer_id, query=query
)
add_customer_match_user_list.py
      

query = <<~EOQUERY
  SELECT user_list.size_for_display, user_list.size_for_search
  FROM user_list
  WHERE user_list.resource_name = #{user_list}
EOQUERY

response = client.service.google_ads.search_stream(
  customer_id: customer_id,
  query: query,
)
add_customer_match_user_list.rb
      

# Create a query that retrieves the user list.
my $search_query =
  "SELECT user_list.size_for_display, user_list.size_for_search " .
  "FROM user_list " .
  "WHERE user_list.resource_name = '$user_list_resource_name'";

# Create a search Google Ads stream request that will retrieve the user list.
my $search_stream_request =
  Google::Ads::GoogleAds::V17::Services::GoogleAdsService::SearchGoogleAdsStreamRequest
  ->new({
    customerId => $customer_id,
    query      => $search_query,
  });

# Get the GoogleAdsService.
my $google_ads_service = $api_client->GoogleAdsService();

my $search_stream_handler =
  Google::Ads::GoogleAds::Utils::SearchStreamHandler->new({
    service => $google_ads_service,
    request => $search_stream_request
  });
add_customer_match_user_list.pl
      

プライバシー保護のため、ユーザー リストのサイズは 0 になるまで 0 と表示されます。 1,000 人未満にする必要があります。その後、サイズはその上位 2 つに四捨五入されます。 あります。

OfflineUserDataJob の実行中に発生するエラーは、 offline_user_data_job Google 広告クエリ言語を使って作成するクエリです。ただし、このレポートには 照合時にハッシュのみが比較されるため、 表示されます。トラブルシューティング ガイドをご覧ください。 確認する必要があります

Google 広告の管理画面との比較

オーディエンス マネージャーでリストを表示する際、表示されるサイズが予想よりも小さくなる場合があります 有効にできますこのビューには、リストのアクティブ ユーザーの数が表示されます。 詳しくは、こちらのトラブルシューティング ガイドをご覧ください。

リストにメンバーが追加されるまで最長で 24 時間ほどかかることがあるため、 In Progress ステータス] が表示されます。 オーディエンス リストにアップロードされる頻度が、12 時間に 1 回を超える頻度。

リストをターゲティング

リストは、広告グループ単位またはキャンペーン単位でターゲットに設定できます。「 手順は API の他のタイプのターゲティング条件に似ています。

private String targetAdsInAdGroupToUserList(
    GoogleAdsClient googleAdsClient, long customerId, long adGroupId, String userList) {
  // Creates the ad group criterion targeting members of the user list.
  AdGroupCriterion adGroupCriterion =
      AdGroupCriterion.newBuilder()
          .setAdGroup(ResourceNames.adGroup(customerId, adGroupId))
          .setUserList(UserListInfo.newBuilder().setUserList(userList).build())
          .build();

  // Creates the operation.
  AdGroupCriterionOperation operation =
      AdGroupCriterionOperation.newBuilder().setCreate(adGroupCriterion).build();

  // Creates the ad group criterion service.
  try (AdGroupCriterionServiceClient adGroupCriterionServiceClient =
      googleAdsClient.getLatestVersion().createAdGroupCriterionServiceClient()) {
    // Adds the ad group criterion.
    MutateAdGroupCriteriaResponse response =
        adGroupCriterionServiceClient.mutateAdGroupCriteria(
            Long.toString(customerId), ImmutableList.of(operation));
    // Gets and prints the results.
    String adGroupCriterionResourceName = response.getResults(0).getResourceName();
    System.out.printf(
        "Successfully created ad group criterion with resource name '%s' "
            + "targeting user list with resource name '%s' with ad group with ID %d.%n",
        adGroupCriterionResourceName, userList, adGroupId);
    return adGroupCriterionResourceName;
  }
}
SetUpRemarketing.java
      

private string TargetAdsInAdGroupToUserList(
    GoogleAdsClient client, long customerId, long adGroupId, string userListResourceName)
{
    // Get the AdGroupCriterionService client.
    AdGroupCriterionServiceClient adGroupCriterionServiceClient = client.GetService
        (Services.V17.AdGroupCriterionService);

    // Create the ad group criterion targeting members of the user list.
    AdGroupCriterion adGroupCriterion = new AdGroupCriterion
    {
        AdGroup = ResourceNames.AdGroup(customerId, adGroupId),
        UserList = new UserListInfo
        {
            UserList = userListResourceName
        }
    };

    // Create the operation.
    AdGroupCriterionOperation adGroupCriterionOperation = new AdGroupCriterionOperation
    {
        Create = adGroupCriterion
    };

    // Add the ad group criterion, then print and return the new criterion's resource name.
    MutateAdGroupCriteriaResponse mutateAdGroupCriteriaResponse =
        adGroupCriterionServiceClient.MutateAdGroupCriteria(customerId.ToString(),
            new[] { adGroupCriterionOperation });

    string adGroupCriterionResourceName =
        mutateAdGroupCriteriaResponse.Results.First().ResourceName;
    Console.WriteLine("Successfully created ad group criterion with resource name " +
        $"'{adGroupCriterionResourceName}' targeting user list with resource name " +
        $"'{userListResourceName}' with ad group with ID {adGroupId}.");
    return adGroupCriterionResourceName;
}
SetUpRemarketing.cs
      

private static function targetAdsInAdGroupToUserList(
    GoogleAdsClient $googleAdsClient,
    int $customerId,
    int $adGroupId,
    string $userListResourceName
): string {
    // Creates the ad group criterion targeting members of the user list.
    $adGroupCriterion = new AdGroupCriterion([
        'ad_group' => ResourceNames::forAdGroup($customerId, $adGroupId),
        'user_list' => new UserListInfo(['user_list' => $userListResourceName])
    ]);

    // Creates the operation.
    $operation = new AdGroupCriterionOperation();
    $operation->setCreate($adGroupCriterion);

    // Issues a mutate request to add an ad group criterion.
    $adGroupCriterionServiceClient = $googleAdsClient->getAdGroupCriterionServiceClient();
    /** @var MutateAdGroupCriteriaResponse $adGroupCriterionResponse */
    $adGroupCriterionResponse = $adGroupCriterionServiceClient->mutateAdGroupCriteria(
        MutateAdGroupCriteriaRequest::build($customerId, [$operation])
    );

    $adGroupCriterionResourceName =
        $adGroupCriterionResponse->getResults()[0]->getResourceName();
    printf(
        "Successfully created ad group criterion with resource name '%s' " .
        "targeting user list with resource name '%s' with ad group with ID %d.%s",
        $adGroupCriterionResourceName,
        $userListResourceName,
        $adGroupId,
        PHP_EOL
    );

    return $adGroupCriterionResourceName;
}
SetUpRemarketing.php
      

def target_ads_in_ad_group_to_user_list(
    client, customer_id, ad_group_id, user_list_resource_name
):
    """Creates an ad group criterion that targets a user list with an ad group.

    Args:
        client: an initialized GoogleAdsClient instance.
        customer_id: a str client customer ID used to create an ad group
            criterion.
        ad_group_id: a str ID for an ad group used to create an ad group
            criterion that targets members of a user list.
        user_list_resource_name: a str resource name for a user list.

    Returns:
        a str resource name for an ad group criterion.
    """
    ad_group_criterion_operation = client.get_type("AdGroupCriterionOperation")
    # Creates the ad group criterion targeting members of the user list.
    ad_group_criterion = ad_group_criterion_operation.create
    ad_group_criterion.ad_group = client.get_service(
        "AdGroupService"
    ).ad_group_path(customer_id, ad_group_id)
    ad_group_criterion.user_list.user_list = user_list_resource_name

    ad_group_criterion_service = client.get_service("AdGroupCriterionService")
    response = ad_group_criterion_service.mutate_ad_group_criteria(
        customer_id=customer_id, operations=[ad_group_criterion_operation]
    )
    resource_name = response.results[0].resource_name
    print(
        "Successfully created ad group criterion with resource name: "
        f"'{resource_name}' targeting user list with resource name: "
        f"'{user_list_resource_name}' and with ad group with ID "
        f"{ad_group_id}."
    )
    return resource_name
set_up_remarketing.py
      

def target_ads_in_ad_group_to_user_list(
  client,
  customer_id,
  ad_group_id,
  user_list
)
  # Creates the ad group criterion targeting members of the user list.
  operation = client.operation.create_resource.ad_group_criterion do |agc|
    agc.ad_group = client.path.ad_group(customer_id, ad_group_id)
    agc.user_list = client.resource.user_list_info do |info|
      info.user_list = user_list
    end
  end

  # Issues a mutate request to create the ad group criterion.
  response = client.service.ad_group_criterion.mutate_ad_group_criteria(
    customer_id: customer_id,
    operations: [operation],
  )
  ad_group_criterion_resource_name = response.results.first.resource_name
  puts "Successfully created ad group criterion with resource name " \
    "'#{ad_group_criterion_resource_name}' targeting user list with resource name " \
    "'#{user_list}' with ad group with ID #{ad_group_id}"

  ad_group_criterion_resource_name
end
set_up_remarketing.rb
      

sub target_ads_in_ad_group_to_user_list {
  my ($api_client, $customer_id, $ad_group_id, $user_list_resource_name) = @_;

  # Create the ad group criterion targeting members of the user list.
  my $ad_group_criterion =
    Google::Ads::GoogleAds::V17::Resources::AdGroupCriterion->new({
      adGroup => Google::Ads::GoogleAds::V17::Utils::ResourceNames::ad_group(
        $customer_id, $ad_group_id
      ),
      userList => Google::Ads::GoogleAds::V17::Common::UserListInfo->new({
          userList => $user_list_resource_name
        })});

  # Create the operation.
  my $ad_group_criterion_operation =
    Google::Ads::GoogleAds::V17::Services::AdGroupCriterionService::AdGroupCriterionOperation
    ->new({
      create => $ad_group_criterion
    });

  # Add the ad group criterion, then print and return the new criterion's resource name.
  my $ad_group_criteria_response =
    $api_client->AdGroupCriterionService()->mutate({
      customerId => $customer_id,
      operations => [$ad_group_criterion_operation]});

  my $ad_group_criterion_resource_name =
    $ad_group_criteria_response->{results}[0]{resourceName};
  printf "Successfully created ad group criterion with resource name '%s' " .
    "targeting user list with resource name '%s' with ad group with ID %d.\n",
    $ad_group_criterion_resource_name, $user_list_resource_name, $ad_group_id;

  return $ad_group_criterion_resource_name;
}
set_up_remarketing.pl
      

複数の顧客リストをターゲットに設定

crm_based_user_list は別の crm_based_user_list とのみ組み合わせることができます logical_user_list を使用する場合。 作成されるユーザーリストには、crm_based_user_list のすべてのポリシーが適用されます。