リードの拡張コンバージョンを使用すると、 次のテキストが含まれるクリック コンバージョンをアップロードし、オフライン コンバージョンの測定 ハッシュ化されたユーザー識別子と、Google 広告に役立つその他の情報(省略可) そのコンバージョンと見込み顧客を呼び込んだ広告を結び付ける。
「Getting Started with Terraform for Google Cloud」 ガイドを参照し、 前提条件 実装してください。
リードの拡張コンバージョンは、Google 広告の管理画面からアップロードできます。手順は次のとおりです。 ヘルプセンターに記載されている または Google Ads API を介して行うことができます。
統合を設計する
使用フロー
リードの拡張コンバージョンをアップロードする手順は、次のとおりです。 Google Ads API。
次のような前提条件が実装されていることを確認します。
コンバージョン トラッキングを有効にする。
顧客データに関する規約に同意します。
ウェブサイトのリードフォームにタグを設定します。
詳細については、 前提条件 をご覧ください。
メールアドレス、電話番号、メールアドレスなどの見込み顧客データを正規化およびハッシュ化する 送付先住所を入力してください。
正規化およびハッシュ化した見込み顧客データを
ClickConversion
オブジェクトに格納します。各ClickConversion
について、次のように設定します。入力
user_identifiers
リードデータを正規化およびハッシュ化し複数のユーザーが 識別子ごとに個別のUserIdentifier
を作成する。 5 つまで指定できます。(省略可、ただし強く推奨)データを入力する
order_id
。(省略可)次の対象について
gclid
を入力します。 最も正確な測定方法ですGoogle Ads API のバージョン v15 以降では、
consent
フィールドClickConversion
オブジェクト。セット
conversion_action
ConversionAction
のリソース名。type
はUPLOAD_CLICKS
。これはアプリケーションのリソース名に 実装時に作成したConversionAction
前提条件をご覧ください。
ClickConversion
作成オペレーションをConversionUploadService
、設定partial_failure
true
へ。アップロードを確認します。
ベスト プラクティス
拡張コンバージョンを実装する際は、以下の点に留意してください。 あります
識別子が複数ある場合は含める
コンバージョンに order_id
を割り当てる場合は、含めることを強くおすすめします。
コンバージョンの「gclid
」がある場合は、それに加えて送信することをおすすめします
パフォーマンス向上のための user_identifiers
。さらに
コンバージョンに対して複数のUserIdentifier
(複数のコンバージョン アクションを含む)
一致の可能性を高めます。すべての識別子を
ClickConversion
。
統合の設定時に Partial Failure エラーを確認する
リードの拡張コンバージョンの統合を最初に設定する際は、
「partial_failure_error
」フィールドで部分的なエラーを確認して対処
返されます。設定に問題がある場合は、これを調べる必要があります
フィールドを使用して調査し対処しますChronicle SOAR における詳細と
Partial Failure エラーの処理については、専用の Partial Failure ガイドをご覧ください。
Partial Failure エラーを確認する際は、一般的な エラー 表をご覧ください。問題を解決したら 発生したエラーが Partial Failure エラーで表示され、統合が完了している場合は、 オフライン データの診断を使用して コンバージョンの状態を定期的に確認する
1 つのリクエストで複数のコンバージョンをバッチ処理する
アップロードするコンバージョンが複数ある場合は、オペレーションを 1 つにまとめて処理します。
UploadClickConversionsRequest
コンバージョンごとにアップロードリクエストを送信するのではなく
割り当てガイドを確認する をご覧ください。
オフライン データの診断機能を使用する場合は、
同じ論理ジョブの下に一連のリクエストをグループ化する場合、すべてのリクエストの job_id
を
同じ値になります。これは、アップロードするジョブまたはプロセスが 1 つで、
複数のリクエストを使用して多数のコンバージョンを処理する場合です。job_id
を設定した場合
同じ値にそれらのリクエストをそれぞれ作成すると、
ジョブのエントリの名前が
job_summaries
。
システムが生成した値を Google Ads API で job_id
に割り当てさせる場合
job_summaries
には、リクエストごとに個別のエントリが含まれます。
ジョブの全体的な健全性を分析することが難しくなる可能性があります。
利用可能なすべてのオフライン コンバージョン イベントをアップロードする
完全かつ正確なコンバージョン レポートを作成するには、オフラインで利用可能なデータをすべてアップロードしてください コンバージョン イベント(Google 広告由来のもの以外も含む)をカウントできます。
すべてのコンバージョン イベントをアップロードすると、いずれかのイベントで CLICK_NOT_FOUND
エラーが発生します
追加することもできますこれらのエラーは、すべてのアセットをアップロードする際に
コンバージョンイベント
UploadClickConversionsRequest
debug_enabled
フィールドがある。
debug_enabled
がfalse
であるか、未設定の場合、Google Ads API は基本的な処理のみを行います。 後続のアップロード チェックをスキップし、 指定されたuser_identifiers
のクリックが見つからない場合。これがデフォルトです。
debug_enabled
がtrue
の場合、Google Ads API はすべての検証を行い、 すべてのClickConversion
でCLICK_NOT_FOUND
エラーを返します。 指定されたuser_identifiers
の Google 広告コンバージョンはありません。
開発時とテスト時に debug_enabled
を true
に設定すると、
特定しますたとえば
一連のコンバージョンと
user_identifiers
Google 広告コンバージョン由来であるとわかっている場合は、
true
設定で、これらのアップロードによって
CLICK_NOT_FOUND
エラー。ただし 開発とテストを終えると
過度なエラーを回避するため、debug_enabled
を false
に設定することをおすすめします。
外部のアトリビューション データを使用しない
ClickConversion
で external_attribution_data
を設定しない、または
外部のアトリビューション モデルを使用する conversion_action
。Google 広告は
識別子を使用したアップロードで、外部で貢献度が割り当てられたコンバージョンをサポートします。
アップロードするデータを準備する
プライバシー保護のため、次のデータは SHA-256 を使ってハッシュ化してください 次の点に注意してください。
- メールアドレス
- 電話番号
- 名
- 姓
- 番地
次のデータはハッシュ化しないでください。
- 国
- 州
- 市区町村
- 郵便番号
ハッシュ結果を標準化するには、事前に次のことを行う必要があります。 次の値のいずれかをハッシュ化します。
- 先頭と末尾の空白文字を削除する。
- テキストを小文字に変換する。
- 電話番号を E164 形式にする 標準。
gmail.com
のドメイン名の前にあるすべてのピリオド(.
)を削除し、googlemail.com
件のメールアドレス。
Java
private String normalizeAndHash(MessageDigest digest, String s) throws UnsupportedEncodingException { // Normalizes by first converting all characters to lowercase, then trimming spaces. String normalized = s.toLowerCase(); // Removes leading, trailing, and intermediate spaces. normalized = normalized.replaceAll("\\s+", ""); // Hashes the normalized string using the hashing algorithm. byte[] hash = digest.digest(normalized.getBytes("UTF-8")); StringBuilder result = new StringBuilder(); for (byte b : hash) { result.append(String.format("%02x", b)); } return result.toString(); } /** * Returns the result of normalizing and hashing an email address. For this use case, Google Ads * requires removal of any '.' characters preceding {@code gmail.com} or {@code googlemail.com}. * * @param digest the digest to use to hash the normalized string. * @param emailAddress the email address to normalize and hash. */ private String normalizeAndHashEmailAddress(MessageDigest digest, String emailAddress) throws UnsupportedEncodingException { String normalizedEmail = emailAddress.toLowerCase(); String[] emailParts = normalizedEmail.split("@"); if (emailParts.length > 1 && emailParts[1].matches("^(gmail|googlemail)\\.com\\s*")) { // Removes any '.' characters from the portion of the email address before the domain if the // domain is gmail.com or googlemail.com. emailParts[0] = emailParts[0].replaceAll("\\.", ""); normalizedEmail = String.format("%s@%s", emailParts[0], emailParts[1]); } return normalizeAndHash(digest, normalizedEmail); }
C#
/// <summary> /// Normalizes the email address and hashes it. For this use case, Google Ads requires /// removal of any '.' characters preceding <code>gmail.com</code> or /// <code>googlemail.com</code>. /// </summary> /// <param name="emailAddress">The email address.</param> /// <returns>The hash code.</returns> private string NormalizeAndHashEmailAddress(string emailAddress) { string normalizedEmail = emailAddress.ToLower(); string[] emailParts = normalizedEmail.Split('@'); if (emailParts.Length > 1 && (emailParts[1] == "gmail.com" || emailParts[1] == "googlemail.com")) { // Removes any '.' characters from the portion of the email address before // the domain if the domain is gmail.com or googlemail.com. emailParts[0] = emailParts[0].Replace(".", ""); normalizedEmail = $"{emailParts[0]}@{emailParts[1]}"; } return NormalizeAndHash(normalizedEmail); } /// <summary> /// Normalizes and hashes a string value. /// </summary> /// <param name="value">The value to normalize and hash.</param> /// <returns>The normalized and hashed value.</returns> private static string NormalizeAndHash(string value) { return ToSha256String(digest, ToNormalizedValue(value)); } /// <summary> /// Hash a string value using SHA-256 hashing algorithm. /// </summary> /// <param name="digest">Provides the algorithm for SHA-256.</param> /// <param name="value">The string value (e.g. an email address) to hash.</param> /// <returns>The hashed value.</returns> private static string ToSha256String(SHA256 digest, string value) { byte[] digestBytes = digest.ComputeHash(Encoding.UTF8.GetBytes(value)); // Convert the byte array into an unhyphenated hexadecimal string. return BitConverter.ToString(digestBytes).Replace("-", string.Empty); } /// <summary> /// Removes leading and trailing whitespace and converts all characters to /// lower case. /// </summary> /// <param name="value">The value to normalize.</param> /// <returns>The normalized value.</returns> private static string ToNormalizedValue(string value) { return value.Trim().ToLower(); }
PHP
private static function normalizeAndHash(string $hashAlgorithm, string $value): string { // Normalizes by first converting all characters to lowercase, then trimming spaces. $normalized = strtolower($value); // Removes leading, trailing, and intermediate spaces. $normalized = str_replace(' ', '', $normalized); return hash($hashAlgorithm, strtolower(trim($normalized))); } /** * Returns the result of normalizing and hashing an email address. For this use case, Google * Ads requires removal of any '.' characters preceding "gmail.com" or "googlemail.com". * * @param string $hashAlgorithm the hash algorithm to use * @param string $emailAddress the email address to normalize and hash * @return string the normalized and hashed email address */ private static function normalizeAndHashEmailAddress( string $hashAlgorithm, string $emailAddress ): string { $normalizedEmail = strtolower($emailAddress); $emailParts = explode("@", $normalizedEmail); if ( count($emailParts) > 1 && preg_match('/^(gmail|googlemail)\.com\s*/', $emailParts[1]) ) { // Removes any '.' characters from the portion of the email address before the domain // if the domain is gmail.com or googlemail.com. $emailParts[0] = str_replace(".", "", $emailParts[0]); $normalizedEmail = sprintf('%s@%s', $emailParts[0], $emailParts[1]); } return self::normalizeAndHash($hashAlgorithm, $normalizedEmail); }
Python
def normalize_and_hash_email_address(email_address): """Returns the result of normalizing and hashing an email address. For this use case, Google Ads requires removal of any '.' characters preceding "gmail.com" or "googlemail.com" Args: email_address: An email address to normalize. Returns: A normalized (lowercase, removed whitespace) and SHA-265 hashed string. """ normalized_email = email_address.lower() email_parts = normalized_email.split("@") # Checks whether the domain of the email address is either "gmail.com" # or "googlemail.com". If this regex does not match then this statement # will evaluate to None. is_gmail = re.match(r"^(gmail|googlemail)\.com$", email_parts[1]) # Check that there are at least two segments and the second segment # matches the above regex expression validating the email domain name. if len(email_parts) > 1 and is_gmail: # Removes any '.' characters from the portion of the email address # before the domain if the domain is gmail.com or googlemail.com. email_parts[0] = email_parts[0].replace(".", "") normalized_email = "@".join(email_parts) return normalize_and_hash(normalized_email) def normalize_and_hash(s): """Normalizes and hashes a string with SHA-256. Private customer data must be hashed during upload, as described at: https://support.google.com/google-ads/answer/7474263 Args: s: The string to perform this operation on. Returns: A normalized (lowercase, removed whitespace) and SHA-256 hashed string. """ return hashlib.sha256(s.strip().lower().encode()).hexdigest()
Ruby
# Returns the result of normalizing and then hashing the string using the # provided digest. Private customer data must be hashed during upload, as # described at https://support.google.com/google-ads/answer/7474263. def normalize_and_hash(str) # Remove leading and trailing whitespace and ensure all letters are lowercase # before hasing. Digest::SHA256.hexdigest(str.strip.downcase) end # Returns the result of normalizing and hashing an email address. For this use # case, Google Ads requires removal of any '.' characters preceding 'gmail.com' # or 'googlemail.com'. def normalize_and_hash_email(email) email_parts = email.downcase.split("@") # Removes any '.' characters from the portion of the email address before the # domain if the domain is gmail.com or googlemail.com. if email_parts.last =~ /^(gmail|googlemail)\.com\s*/ email_parts[0] = email_parts[0].gsub('.', '') end normalize_and_hash(email_parts.join('@')) end
Perl
sub normalize_and_hash { my $value = shift; # Removes leading, trailing, and intermediate spaces. $value =~ s/\s+//g; return sha256_hex(lc $value); } # Returns the result of normalizing and hashing an email address. For this use # case, Google Ads requires removal of any '.' characters preceding 'gmail.com' # or 'googlemail.com'. sub normalize_and_hash_email_address { my $email_address = shift; my $normalized_email = lc $email_address; my @email_parts = split('@', $normalized_email); if (scalar @email_parts > 1 && $email_parts[1] =~ /^(gmail|googlemail)\.com\s*/) { # Remove any '.' characters from the portion of the email address before the # domain if the domain is 'gmail.com' or 'googlemail.com'. $email_parts[0] =~ s/\.//g; $normalized_email = sprintf '%s@%s', $email_parts[0], $email_parts[1]; } return normalize_and_hash($normalized_email); }
拡張コンバージョンのアップロード
次のスニペットは、コンバージョン アップロードを作成する方法を示しています。
メールアドレスと電話番号の識別子を含む(標準化)
必要に応じてハッシュ化されますベスト プラクティスとして、gclid
と
コンバージョンに対する order_id
(利用可能な場合)。
ユーザー ID を ClickConversion に追加する
Java
// Creates an empty builder for constructing the click conversion. ClickConversion.Builder clickConversionBuilder = ClickConversion.newBuilder(); // Extracts user email and phone from the raw data, normalizes and hashes it, then wraps it in // UserIdentifier objects. // Creates a separate UserIdentifier object for each. The data in this example is hardcoded, but // in your application you might read the raw data from an input file. // IMPORTANT: Since the identifier attribute of UserIdentifier // (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier) is a // oneof // (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must set only ONE of // hashedEmail, hashedPhoneNumber, mobileId, thirdPartyUserId, or addressInfo. Setting more // than one of these attributes on the same UserIdentifier will clear all the other members // of the oneof. For example, the following code is INCORRECT and will result in a // UserIdentifier with ONLY a hashedPhoneNumber. // // UserIdentifier incorrectlyPopulatedUserIdentifier = // UserIdentifier.newBuilder() // .setHashedEmail("...") // .setHashedPhoneNumber("...") // .build(); Map<String, String> rawRecord = ImmutableMap.<String, String>builder() // Email address that includes a period (.) before the Gmail domain. .put("email", "alex.2@example.com") // Phone number to be converted to E.164 format, with a leading '+' as required. .put("phone", "+1 800 5550102") // This example lets you input conversion details as arguments, but in reality you might // store this data alongside other user data, so we include it in this sample user // record. .put("orderId", orderId) .put("gclid", gclid) .put("conversionActionId", Long.toString(conversionActionId)) .put("conversionDateTime", conversionDateTime) .put("conversionValue", Double.toString(conversionValue)) .put("currencyCode", "USD") .put("adUserDataConsent", adUserDataConsent == null ? null : adUserDataConsent.name()) .build(); // Creates a SHA256 message digest for hashing user identifiers in a privacy-safe way, as // described at https://support.google.com/google-ads/answer/9888656. MessageDigest sha256Digest = MessageDigest.getInstance("SHA-256"); // Creates a list for the user identifiers. List<UserIdentifier> userIdentifiers = new ArrayList<>(); // Creates a user identifier using the hashed email address, using the normalize and hash method // specifically for email addresses. UserIdentifier emailIdentifier = UserIdentifier.newBuilder() // Optional: specify the user identifier source. .setUserIdentifierSource(UserIdentifierSource.FIRST_PARTY) // Uses the normalize and hash method specifically for email addresses. .setHashedEmail(normalizeAndHashEmailAddress(sha256Digest, rawRecord.get("email"))) .build(); userIdentifiers.add(emailIdentifier); // Creates a user identifier using normalized and hashed phone info. UserIdentifier hashedPhoneNumberIdentifier = UserIdentifier.newBuilder() .setHashedPhoneNumber(normalizeAndHash(sha256Digest, rawRecord.get("phone"))) .build(); // Adds the hashed phone number identifier to the UserData object's list. userIdentifiers.add(hashedPhoneNumberIdentifier); // Adds the user identifiers to the conversion. clickConversionBuilder.addAllUserIdentifiers(userIdentifiers);
C#
// Adds a user identifier using the hashed email address, using the normalize // and hash method specifically for email addresses. clickConversion.UserIdentifiers.Add(new UserIdentifier() { HashedEmail = NormalizeAndHashEmailAddress("alex.2@example.com"), // Optional: Specifies the user identifier source. UserIdentifierSource = UserIdentifierSource.FirstParty }); // Adds a user identifier using normalized and hashed phone info. clickConversion.UserIdentifiers.Add(new UserIdentifier() { HashedPhoneNumber = NormalizeAndHash("+1 800 5550102"), // Optional: Specifies the user identifier source. UserIdentifierSource = UserIdentifierSource.FirstParty }); // Adds a user identifier with all the required mailing address elements. clickConversion.UserIdentifiers.Add(new UserIdentifier() { AddressInfo = new OfflineUserAddressInfo() { // FirstName and LastName must be normalized and hashed. HashedFirstName = NormalizeAndHash("Alex"), HashedLastName = NormalizeAndHash("Quinn"), // CountryCode and PostalCode are sent in plain text. CountryCode = "US", PostalCode = "94045" } });
PHP
// Creates a click conversion with the specified attributes. $clickConversion = new ClickConversion(); // Extract user email and phone from the raw data, normalize and hash it, then wrap it in // UserIdentifier objects. Creates a separate UserIdentifier object for each. // The data in this example is hardcoded, but in your application you might read the raw // data from an input file. // IMPORTANT: Since the identifier attribute of UserIdentifier // (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier) is a // oneof // (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must set only ONE // of hashedEmail, hashedPhoneNumber, mobileId, thirdPartyUserId, or addressInfo. Setting // more than one of these attributes on the same UserIdentifier will clear all the other // members of the oneof. For example, the following code is INCORRECT and will result in a // UserIdentifier with ONLY a hashedPhoneNumber. // // $incorrectlyPopulatedUserIdentifier = new UserIdentifier([ // 'hashed_email' => '...', // 'hashed_phone_number' => '...' // ]); $rawRecord = [ // Email address that includes a period (.) before the Gmail domain. 'email' => 'alex.2@example.com', // Phone number to be converted to E.164 format, with a leading '+' as required. 'phone' => '+1 800 5550102', // This example lets you input conversion details as arguments, but in reality you might // store this data alongside other user data, so we include it in this sample user // record. 'orderId' => $orderId, 'gclid' => $gclid, 'conversionActionId' => $conversionActionId, 'conversionDateTime' => $conversionDateTime, 'conversionValue' => $conversionValue, 'currencyCode' => 'USD', 'adUserDataConsent' => $adUserDataConsent ]; // Creates a list for the user identifiers. $userIdentifiers = []; // Uses the SHA-256 hash algorithm for hashing user identifiers in a privacy-safe way, as // described at https://support.google.com/google-ads/answer/9888656. $hashAlgorithm = "sha256"; // Creates a user identifier using the hashed email address, using the normalize and hash // method specifically for email addresses. $emailIdentifier = new UserIdentifier([ // Uses the normalize and hash method specifically for email addresses. 'hashed_email' => self::normalizeAndHashEmailAddress( $hashAlgorithm, $rawRecord['email'] ), // Optional: Specifies the user identifier source. 'user_identifier_source' => UserIdentifierSource::FIRST_PARTY ]); $userIdentifiers[] = $emailIdentifier; // Checks if the record has a phone number, and if so, adds a UserIdentifier for it. if (array_key_exists('phone', $rawRecord)) { $hashedPhoneNumberIdentifier = new UserIdentifier([ 'hashed_phone_number' => self::normalizeAndHash( $hashAlgorithm, $rawRecord['phone'], true ) ]); // Adds the hashed email identifier to the user identifiers list. $userIdentifiers[] = $hashedPhoneNumberIdentifier; } // Adds the user identifiers to the conversion. $clickConversion->setUserIdentifiers($userIdentifiers);
Python
# Extract user email and phone from the raw data, normalize and hash it, # then wrap it in UserIdentifier objects. Create a separate UserIdentifier # object for each. The data in this example is hardcoded, but in your # application you might read the raw data from an input file. # IMPORTANT: Since the identifier attribute of UserIdentifier # (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier) # is a oneof # (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must # set only ONE of hashed_email, hashed_phone_number, mobile_id, # third_party_user_id, or address_info. Setting more than one of these # attributes on the same UserIdentifier will clear all the other members of # the oneof. For example, the following code is INCORRECT and will result in # a UserIdentifier with ONLY a hashed_phone_number: # # incorrectly_populated_user_identifier = client.get_type("UserIdentifier") # incorrectly_populated_user_identifier.hashed_email = "..."" # incorrectly_populated_user_identifier.hashed_phone_number = "..."" raw_record = { # Email address that includes a period (.) before the Gmail domain. "email": "alex.2@example.com", # Phone number to be converted to E.164 format, with a leading '+' as # required. "phone": "+1 800 5550102", # This example lets you input conversion details as arguments, # but in reality you might store this data alongside other user data, # so we include it in this sample user record. "order_id": order_id, "gclid": gclid, "conversion_action_id": conversion_action_id, "conversion_date_time": conversion_date_time, "conversion_value": conversion_value, "currency_code": "USD", "ad_user_data_consent": ad_user_data_consent, } # Constructs the click conversion. click_conversion = client.get_type("ClickConversion") # Creates a user identifier using the hashed email address, using the # normalize and hash method specifically for email addresses. email_identifier = client.get_type("UserIdentifier") # Optional: Specifies the user identifier source. email_identifier.user_identifier_source = ( client.enums.UserIdentifierSourceEnum.FIRST_PARTY ) # Uses the normalize and hash method specifically for email addresses. email_identifier.hashed_phone_number = normalize_and_hash_email_address( raw_record["email"] ) # Adds the user identifier to the conversion. click_conversion.user_identifiers.append(email_identifier) # Checks if the record has a phone number, and if so, adds a UserIdentifier # for it. if raw_record.get("phone") is not None: phone_identifier = client.get_type("UserIdentifier") phone_identifier.hashed_phone_number = normalize_and_hash( raw_record["phone"] ) # Adds the phone identifier to the conversion adjustment. click_conversion.user_identifiers.append(phone_identifier)
Ruby
# Extract user email and phone from the raw data, normalize and hash it, # then wrap it in UserIdentifier objects. Create a separate UserIdentifier # object for each. The data in this example is hardcoded, but in your # application you might read the raw data from an input file. # IMPORTANT: Since the identifier attribute of UserIdentifier # (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier) # is a oneof # (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must # set only ONE of hashed_email, hashed_phone_number, mobile_id, # third_party_user_id, or address_info. Setting more than one of these # attributes on the same UserIdentifier will clear all the other members of # the oneof. For example, the following code is INCORRECT and will result in # a UserIdentifier with ONLY a hashed_phone_number: # # incorrectly_populated_user_identifier.hashed_email = "..."" # incorrectly_populated_user_identifier.hashed_phone_number = "..."" raw_record = { # Email address that includes a period (.) before the Gmail domain. "email" => "alex.2@example.com", # Phone number to be converted to E.164 format, with a leading '+' as # required. "phone" => "+1 800 5550102", # This example lets you input conversion details as arguments, # but in reality you might store this data alongside other user data, # so we include it in this sample user record. "order_id" => order_id, "gclid" => gclid, "conversion_action_id" => conversion_action_id, "conversion_date_time" => conversion_date_time, "conversion_value" => conversion_value, "currency_code" => "USD", "ad_user_data_consent" => ad_user_data_consent, } click_conversion = client.resource.click_conversion do |cc| cc.conversion_action = client.path.conversion_action(customer_id, conversion_action_id) cc.conversion_date_time = conversion_date_time cc.conversion_value = conversion_value.to_f cc.currency_code = 'USD' unless order_id.nil? cc.order_id = order_id end unless raw_record["gclid"].nil? cc.gclid = gclid end # Specifies whether user consent was obtained for the data you are # uploading. For more details, see: # https://www.google.com/about/company/user-consent-policy unless raw_record["ad_user_data_consent"].nil? cc.consent = client.resource.consent do |c| c.ad_user_data = ad_user_data_consent end end # Creates a user identifier using the hashed email address, using the # normalize and hash method specifically for email addresses. # If using a phone number, use the normalize_and_hash method instead. cc.user_identifiers << client.resource.user_identifier do |ui| ui.hashed_phone_number = normalize_and_hash_email(raw_record["email"]) # Optional: Specifies the user identifier source. ui.user_identifier_source = :FIRST_PARTY end # Checks if the record has a phone number, and if so, adds a UserIdentifier # for it. unless raw_record["phone"].nil? cc.user_identifiers << client.resource.user_identifier do |ui| ui.hashed_phone_number = normalize_and_hash_email(raw_record["phone"]) end end end
Perl
# Create an empty click conversion. my $click_conversion = Google::Ads::GoogleAds::V17::Services::ConversionUploadService::ClickConversion ->new({}); # Extract user email and phone from the raw data, normalize and hash it, # then wrap it in UserIdentifier objects. Create a separate UserIdentifier # object for each. # The data in this example is hardcoded, but in your application # you might read the raw data from an input file. # # IMPORTANT: Since the identifier attribute of UserIdentifier # (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier) # is a oneof # (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must set # only ONE of hashed_email, hashed_phone_number, mobile_id, third_party_user_id, # or address-info. Setting more than one of these attributes on the same UserIdentifier # will clear all the other members of the oneof. For example, the following code is # INCORRECT and will result in a UserIdentifier with ONLY a hashed_phone_number: # # my $incorrect_user_identifier = Google::Ads::GoogleAds::V17::Common::UserIdentifier->new({ # hashedEmail => '...', # hashedPhoneNumber => '...', # }); my $raw_record = { # Email address that includes a period (.) before the Gmail domain. email => 'alex.2@example.com', # Phone number to be converted to E.164 format, with a leading '+' as # required. phone => '+1 800 5550102', # This example lets you input conversion details as arguments, # but in reality you might store this data alongside other user data, # so we include it in this sample user record. orderId => $order_id, gclid => $gclid, conversionActionId => $conversion_action_id, conversionDateTime => $conversion_date_time, conversionValue => $conversion_value, currencyCode => "USD", adUserDataConsent => $ad_user_data_consent }; my $user_identifiers = []; # Create a user identifier using the hashed email address, using the normalize # and hash method specifically for email addresses. my $hashed_email = normalize_and_hash_email_address($raw_record->{email}); push( @$user_identifiers, Google::Ads::GoogleAds::V17::Common::UserIdentifier->new({ hashedEmail => $hashed_email, # Optional: Specify the user identifier source. userIdentifierSource => FIRST_PARTY })); # Create a user identifier using normalized and hashed phone info. my $hashed_phone = normalize_and_hash($raw_record->{phone}); push( @$user_identifiers, Google::Ads::GoogleAds::V17::Common::UserIdentifier->new({ hashedPhone => $hashed_phone, # Optional: Specify the user identifier source. userIdentifierSource => FIRST_PARTY })); # Add the user identifiers to the conversion. $click_conversion->{userIdentifiers} = $user_identifiers;
ClickConversion にコンバージョンの詳細を追加する
Java
// Adds details of the conversion. clickConversionBuilder.setConversionAction( ResourceNames.conversionAction( customerId, Long.parseLong(rawRecord.get("conversionActionId")))); clickConversionBuilder.setConversionDateTime(rawRecord.get("conversionDateTime")); clickConversionBuilder.setConversionValue(Double.parseDouble(rawRecord.get("conversionValue"))); clickConversionBuilder.setCurrencyCode(rawRecord.get("currencyCode")); // Sets the order ID if provided. if (rawRecord.get("orderId") != null) { clickConversionBuilder.setOrderId(rawRecord.get("orderId")); } // Sets the Google click ID (gclid) if provided. if (rawRecord.get("gclid") != null) { clickConversionBuilder.setGclid(rawRecord.get("gclid")); } // Sets the consent information, if provided. if (rawRecord.get("adUserDataConsent") != null) { // Specifies whether user consent was obtained for the data you are uploading. See // https://www.google.com/about/company/user-consent-policy for details. clickConversionBuilder.setConsent( Consent.newBuilder() .setAdUserData(ConsentStatus.valueOf(rawRecord.get("adUserDataConsent")))); } // Calls build to build the conversion. ClickConversion clickConversion = clickConversionBuilder.build();
C#
// Adds details of the conversion. clickConversion.ConversionAction = ResourceNames.ConversionAction(customerId, conversionActionId); clickConversion.ConversionDateTime = conversionDateTime; clickConversion.ConversionValue = conversionValue; clickConversion.CurrencyCode = "USD"; // Sets the order ID if provided. if (!string.IsNullOrEmpty(orderId)) { clickConversion.OrderId = orderId; } // Sets the Google click ID (gclid) if provided. if (!string.IsNullOrEmpty(gclid)) { clickConversion.Gclid = gclid; }
PHP
// Adds details of the conversion. $clickConversion->setConversionAction( ResourceNames::forConversionAction($customerId, $rawRecord['conversionActionId']) ); $clickConversion->setConversionDateTime($rawRecord['conversionDateTime']); $clickConversion->setConversionValue($rawRecord['conversionValue']); $clickConversion->setCurrencyCode($rawRecord['currencyCode']); // Sets the order ID if provided. if (!empty($rawRecord['orderId'])) { $clickConversion->setOrderId($rawRecord['orderId']); } // Sets the Google click ID (gclid) if provided. if (!empty($rawRecord['gclid'])) { $clickConversion->setGclid($rawRecord['gclid']); } // Sets the ad user data consent if provided. if (!empty($rawRecord['adUserDataConsent'])) { // Specifies whether user consent was obtained for the data you are uploading. See // https://www.google.com/about/company/user-consent-policy for details. $clickConversion->setConsent( new Consent(['ad_user_data' => $rawRecord['adUserDataConsent']]) ); }
Python
# Add details of the conversion. # Gets the conversion action resource name. conversion_action_service = client.get_service("ConversionActionService") click_conversion.conversion_action = ( conversion_action_service.conversion_action_path( customer_id, raw_record["conversion_action_id"] ) ) click_conversion.conversion_date_time = raw_record["conversion_date_time"] click_conversion.conversion_value = raw_record["conversion_value"] click_conversion.currency_code = raw_record["currency_code"] # Sets the order ID if provided. if raw_record.get("order_id"): click_conversion.order_id = raw_record["order_id"] # Sets the gclid if provided. if raw_record.get("gclid"): click_conversion.gclid = raw_record["gclid"] # Specifies whether user consent was obtained for the data you are # uploading. For more details, see: # https://www.google.com/about/company/user-consent-policy if raw_record["ad_user_data_consent"]: click_conversion.consent.ad_user_data = client.enums.ConsentStatusEnum[ raw_record["ad_user_data_consent"] ]
Ruby
cc.conversion_action = client.path.conversion_action(customer_id, conversion_action_id) cc.conversion_date_time = conversion_date_time cc.conversion_value = conversion_value.to_f cc.currency_code = 'USD' unless order_id.nil? cc.order_id = order_id end unless raw_record["gclid"].nil? cc.gclid = gclid end # Specifies whether user consent was obtained for the data you are # uploading. For more details, see: # https://www.google.com/about/company/user-consent-policy unless raw_record["ad_user_data_consent"].nil? cc.consent = client.resource.consent do |c| c.ad_user_data = ad_user_data_consent end end
Perl
# Add details of the conversion. $click_conversion->{conversionAction} = Google::Ads::GoogleAds::V17::Utils::ResourceNames::conversion_action( $customer_id, $raw_record->{conversionActionId}); $click_conversion->{conversionDateTime} = $raw_record->{conversionDateTime}; $click_conversion->{conversionValue} = $raw_record->{conversionValue}; $click_conversion->{currencyCode} = $raw_record->{currencyCode}; # Set the order ID if provided. if (defined $raw_record->{orderId}) { $click_conversion->{orderId} = $raw_record->{orderId}; } # Set the Google click ID (gclid) if provided. if (defined $raw_record->{gclid}) { $click_conversion->{gclid} = $raw_record->{gclid}; } # Set the consent information, if provided. if (defined $raw_record->{adUserDataConsent}) { $click_conversion->{consent} = Google::Ads::GoogleAds::V17::Common::Consent->new({ adUserData => $raw_record->{adUserDataConsent}}); }
クリック コンバージョンをアップロードする
Java
// Creates the conversion upload service client. try (ConversionUploadServiceClient conversionUploadServiceClient = googleAdsClient.getLatestVersion().createConversionUploadServiceClient()) { // Uploads the click conversion. Partial failure should always be set to true. // NOTE: This request contains a single conversion as a demonstration. However, if you have // multiple conversions to upload, it's best to upload multiple conversions per request // instead of sending a separate request per conversion. See the following for per-request // limits: // https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service UploadClickConversionsResponse response = conversionUploadServiceClient.uploadClickConversions( UploadClickConversionsRequest.newBuilder() .setCustomerId(Long.toString(customerId)) .addConversions(clickConversion) // Enables partial failure (must be true). .setPartialFailure(true) .build());
C#
// Uploads the click conversion. Partial failure should always be set to true. // NOTE: This request contains a single conversion as a demonstration. // However, if you have multiple conversions to upload, it's best to upload multiple // conversions per request instead of sending a separate request per conversion. // See the following for per-request limits: // https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload UploadClickConversionsResponse response = conversionUploadService.UploadClickConversions( new UploadClickConversionsRequest() { CustomerId = customerId.ToString(), Conversions = { clickConversion }, // Enables partial failure (must be true). PartialFailure = true });
PHP
// Issues a request to upload the click conversion. $conversionUploadServiceClient = $googleAdsClient->getConversionUploadServiceClient(); // NOTE: This request contains a single conversion as a demonstration. However, if you have // multiple conversions to upload, it's best to upload multiple conversions per request // instead of sending a separate request per conversion. See the following for per-request // limits: // https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service $response = $conversionUploadServiceClient->uploadClickConversions( // Enables partial failure (must be true). UploadClickConversionsRequest::build($customerId, [$clickConversion], true) );
Python
# Creates the conversion upload service client. conversion_upload_service = client.get_service("ConversionUploadService") # Uploads the click conversion. Partial failure should always be set to # True. # NOTE: This request only uploads a single conversion, but if you have # multiple conversions to upload, it's most efficient to upload them in a # single request. See the following for per-request limits for reference: # https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service response = conversion_upload_service.upload_click_conversions( customer_id=customer_id, conversions=[click_conversion], # Enables partial failure (must be true). partial_failure=True, )
Ruby
response = client.service.conversion_upload.upload_click_conversions( customer_id: customer_id, conversions: [click_conversion], # Partial failure must be true. partial_failure: true, ) if response.partial_failure_error puts "Partial failure encountered: #{response.partial_failure_error.message}" else result = response.results.first puts "Uploaded click conversion that happened at #{result.conversion_date_time} " \ "to #{result.conversion_action}." end
Perl
# Upload the click conversion. Partial failure should always be set to true. # # NOTE: This request contains a single conversion as a demonstration. # However, if you have multiple conversions to upload, it's best to # upload multiple conversions per request instead of sending a separate # request per conversion. See the following for per-request limits: # https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service my $response = $api_client->ConversionUploadService()->upload_click_conversions({ customerId => $customer_id, conversions => [$click_conversion], # Enable partial failure (must be true). partialFailure => "true" });
アップロードを確認する
オフライン データの診断を使用して確認する 最近のアップロードの全体的な状態を確認できますなお、アップロードが正常に完了しても、 一致していることを意味します
キャンペーンのコンバージョン指標のレポートを作成するには、ユーザーのマッピング
インターフェース指標: Google 広告の UI を関連付けます
Google Ads API: Reporting フィールドとまた、kubectl の「get」コマンドや
合計を表示する conversion_action
リソース
特定のコンバージョンの数と合計コンバージョン値
できます。
次のステップ
コンバージョンを調整する必要がある場合は、コンバージョンをアップロード 調整ガイドをご覧ください。
リードの拡張コンバージョンの統合に関するトラブルシューティングのガイダンスについては、 次に進みます: トラブルシューティング ご覧ください