Vous pouvez utiliser l'API Google Ads pour importer les appels hors connexion de conversions dans Google Ads afin de déterminer quand les annonces génèrent des appels téléphoniques et quand ceux-ci génèrent des prospects. à des actions intéressantes de la part des clients.
Vous ne pouvez pas importer un clic "Appels directs depuis des mobiles" en tant que conversion s'il n'y a pas Numéro de transfert Google associé à l'appel. Sans redirection Google Google ne peut pas s'assurer que le clic a généré un appel, puis avant une conversion. Si un clic est importé de cette manière, il sera ignoré par la variable action de conversion.
Mapper avec l'interface utilisateur Google Ads revient à utiliser la conversion Importations. source, puis sélectionnez Conversions à partir d'appels.
Créer une conversion par appel
Voici quelques points à retenir lorsque vous créez un CallConversion:
À partir de la version v15 de l'API Google Ads, vous devez renseigner le champ Champ
consentdeCallConversion.L'attribut
partial_failuredeUploadCallConversionsRequestdoit toujours être défini surtrue. Suivez les instructions relatives aux échecs partiels de sécurité pour la gestion les opérations ayant échoué simultanément.Si vous rencontrez un
TOO_RECENT_CONVERSION_ACTIONouTOO_RECENT_CALLà une demande d'importation de conversion, patientez 6 heures ou 12 heures, avant de relancer les lignes ayant échoué.Un délai de trois heures peut être nécessaire pour que les statistiques sur les conversions importées s'affichent dans vos compte Google Ads.
Si vous importez des conversions en double (c'est-à-dire un
CallConversionavec une valeurcaller_id,conversion_date_timeetconversion_actionqui étaient précédemment importé), une erreurCALL_CONVERSION_ALREADY_EXISTSest renvoyée.- Si une même demande contient plusieurs opérations pour la même conversion,
une erreur
DUPLICATE_CALL_CONVERSION_IN_REQUESTest renvoyée.
- Si une même demande contient plusieurs opérations pour la même conversion,
une erreur
Importer une conversion par appel
Pour associer vos conversions par appel hors connexion à une action de conversion,
ont besoin des informations suivantes: le numéro de l'appelant (numéro de téléphone),
date et heure de la conversion, nom de la ressource de l'action de conversion et, éventuellement,
la valeur de conversion et la devise
ConversionUploadService
Pour en savoir plus sur les différentes entrées, consultez notre Aide
Center. Le code
exemple décrit également les formats des différentes entrées.
Conditions requises
Lorsque vous importez un fichier
CallConversion
Pour éviter une erreur ConversionUploadError.INVALID_CONVERSION_ACTION, le
Attribut conversion_action
doit faire référence à un ConversionAction où:
ConversionActionTypeestUPLOAD_CALLSLa
statussurConversionActionestENABLED. Sinon, l'opération échoue avec uneNO_CONVERSION_ACTION_FOUND.Le
ConversionActionexiste dans le client de conversion Google Ads du le compte Google Ads de ce clic.
Nous vous recommandons également de définir
ConversionAction.category vers
catégorie qui décrit le mieux vos conversions.
De plus, les conditions suivantes doivent être remplies:
Au moment de l'appel, le suivi des conversions était activé dans la Client ayant réalisé une conversion Google Ads du compte Google Ads associé à l'appel.
Le
customer_iddeUploadCallConversionsRequestdoit être le numéro client de la conversion Google Ads. client de au compte Google Ads de l'appel. Sinon, l'importation des conversions généreraConversionUploadError.INVALID_CUSTOMER_FOR_CALLerreur.La valeur de
conversion_valuedoit être supérieure ou égale à zéro.Vous devez spécifier un fuseau horaire pour
conversion_date_time, et le format est en tant queyyyy-mm-dd HH:mm:ss+|-HH:mm, par exemple:2022-01-01 19:32:45-05:00(sans tenir compte de l'heure d'été) pour en savoir plus. Le fuseau horaire peut correspondre à n'importe quelle valeur valide : pas devant correspondre au fuseau horaire du compte.
Exemple de code
Java
private void runExample(
GoogleAdsClient googleAdsClient,
long customerId,
String conversionActionId,
String callerId,
String callStartDateTime,
double conversionValue,
Long conversionCustomVariableId,
String conversionCustomVariableValue,
ConsentStatus adUserDataConsent) {
// Create a call conversion by specifying currency as USD.
CallConversion.Builder conversionBuilder =
CallConversion.newBuilder()
.setConversionAction(conversionActionId)
.setCallerId(callerId)
.setCallStartDateTime(callStartDateTime)
.setConversionValue(conversionValue)
.setCurrencyCode("USD");
if (conversionCustomVariableId != null && conversionCustomVariableValue != null) {
conversionBuilder.addCustomVariables(
CustomVariable.newBuilder()
.setConversionCustomVariable(
ResourceNames.conversionCustomVariable(customerId, conversionCustomVariableId))
.setValue(conversionCustomVariableValue));
}
// Sets the consent information, if provided.
if (adUserDataConsent != null) {
// Specifies whether user consent was obtained for the data you are uploading. See
// https://www.google.com/about/company/user-consent-policy for details.
conversionBuilder.setConsent(Consent.newBuilder().setAdUserData(adUserDataConsent));
}
CallConversion conversion = conversionBuilder.build();
// Uploads the call conversion to the API.
try (ConversionUploadServiceClient conversionUploadServiceClient =
googleAdsClient.getLatestVersion().createConversionUploadServiceClient()) {
// Partial failure MUST be enabled for this request.
// NOTE: This request contains a single conversion as a demonstration. However, if you have
// multiple conversions to upload, it's best to upload multiple conversions per request
// instead of sending a separate request per conversion. See the following for per-request
// limits:
// https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
UploadCallConversionsResponse response =
conversionUploadServiceClient.uploadCallConversions(
UploadCallConversionsRequest.newBuilder()
.setCustomerId(String.valueOf(customerId))
.setCustomerId(Long.toString(customerId))
.addConversions(conversion)
.setPartialFailure(true)
.build());
// Prints any partial failure errors returned.
if (response.hasPartialFailureError()) {
GoogleAdsFailure googleAdsFailure =
ErrorUtils.getInstance().getGoogleAdsFailure(response.getPartialFailureError());
googleAdsFailure
.getErrorsList()
.forEach(e -> System.out.println("Partial failure occurred: " + e.getMessage()));
throw new RuntimeException(
"Partial failure occurred " + response.getPartialFailureError().getMessage());
}
// Prints the result if valid.
CallConversionResult result = response.getResults(0);
System.out.printf(
"Uploaded call conversion that occurred at '%' for caller ID '%' to the conversion"
+ " action with resource name '%'.%n",
result.getCallStartDateTime(), result.getCallerId(), result.getConversionAction());
}
}
C#
public void Run(GoogleAdsClient client, long customerId,
long conversionActionId, string callerId, string callStartTime,
string conversionTime, double conversionValue,
long? conversionCustomVariableId, string conversionCustomVariableValue,
ConsentStatus? adUserDataConsent)
{
// Get the ConversionUploadService.
ConversionUploadServiceClient conversionUploadService =
client.GetService(Services.V17.ConversionUploadService);
// Create a call conversion by specifying currency as USD.
CallConversion callConversion = new CallConversion()
{
ConversionAction = ResourceNames.ConversionAction(customerId, conversionActionId),
CallerId = callerId,
CallStartDateTime = callStartTime,
ConversionDateTime = conversionTime,
ConversionValue = conversionValue,
CurrencyCode = "USD",
};
if (adUserDataConsent != null)
{
// Specifies whether user consent was obtained for the data you are uploading. See
// https://www.google.com/about/company/user-consent-policy
// for details.
callConversion.Consent = new Consent()
{
AdUserData = (ConsentStatus)adUserDataConsent
};
}
if (conversionCustomVariableId != null &&
!string.IsNullOrEmpty(conversionCustomVariableValue))
{
callConversion.CustomVariables.Add(new CustomVariable()
{
ConversionCustomVariable = ResourceNames.ConversionCustomVariable(
customerId, conversionCustomVariableId.Value),
Value = conversionCustomVariableValue
});
}
UploadCallConversionsRequest request = new UploadCallConversionsRequest()
{
CustomerId = customerId.ToString(),
Conversions = { callConversion },
PartialFailure = true
};
try
{
// Issues a request to upload the call conversion. The partialFailure parameter
// is set to true, and validateOnly parameter to false as required by this method
// call.
// NOTE: This request contains a single conversion as a demonstration. However, if
// you have multiple conversions to upload, it's best to upload multiple conversions
// per request instead of sending a separate request per conversion. See the
// following for per-request limits:
// https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
UploadCallConversionsResponse response =
conversionUploadService.UploadCallConversions(request);
// Since we set partialFailure = true, we can retrieve error messages (if any) from
// the operation response.
if (response.PartialFailureError != null)
{
Console.WriteLine("Call conversion upload failed.");
// Retrieves the errors from the partial failure and prints them.
List<GoogleAdsError> errors =
response.PartialFailure.GetErrorsByOperationIndex(0);
foreach (GoogleAdsError error in errors)
{
Console.WriteLine($"Operation failed with error: {error}.");
}
}
else
{
// Prints the result.
CallConversionResult uploadedCallConversion = response.Results[0];
Console.WriteLine($"Uploaded call conversion that occurred at " +
$"'{uploadedCallConversion.CallStartDateTime}' for caller ID " +
$"'{uploadedCallConversion.CallerId}' to the conversion action with " +
$"resource name '{uploadedCallConversion.ConversionAction}'.");
}
}
catch (GoogleAdsException e)
{
Console.WriteLine("Failure:");
Console.WriteLine($"Message: {e.Message}");
Console.WriteLine($"Failure: {e.Failure}");
Console.WriteLine($"Request ID: {e.RequestId}");
throw;
}
}
PHP
public static function runExample(
GoogleAdsClient $googleAdsClient,
int $customerId,
int $conversionActionId,
string $callerId,
string $callStartDateTime,
string $conversionDateTime,
float $conversionValue,
?string $conversionCustomVariableId,
?string $conversionCustomVariableValue,
?int $adUserDataConsent
) {
// Creates a call conversion by specifying currency as USD.
$callConversion = new CallConversion([
'conversion_action' =>
ResourceNames::forConversionAction($customerId, $conversionActionId),
'caller_id' => $callerId,
'call_start_date_time' => $callStartDateTime,
'conversion_date_time' => $conversionDateTime,
'conversion_value' => $conversionValue,
'currency_code' => 'USD'
]);
if (!is_null($conversionCustomVariableId) && !is_null($conversionCustomVariableValue)) {
$callConversion->setCustomVariables([new CustomVariable([
'conversion_custom_variable' => ResourceNames::forConversionCustomVariable(
$customerId,
$conversionCustomVariableId
),
'value' => $conversionCustomVariableValue
])]);
}
// Sets the consent information, if provided.
if (!empty($adUserDataConsent)) {
// Specifies whether user consent was obtained for the data you are uploading. See
// https://www.google.com/about/company/user-consent-policy for details.
$callConversion->setConsent(new Consent(['ad_user_data' => $adUserDataConsent]));
}
// Issues a request to upload the call conversion.
$conversionUploadServiceClient = $googleAdsClient->getConversionUploadServiceClient();
// NOTE: This request contains a single conversion as a demonstration. However, if you have
// multiple conversions to upload, it's best to upload multiple conversions per request
// instead of sending a separate request per conversion. See the following for per-request
// limits:
// https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
$response = $conversionUploadServiceClient->uploadCallConversions(
// Partial failure MUST be enabled for this request.
UploadCallConversionsRequest::build($customerId, [$callConversion], true)
);
// Prints the status message if any partial failure error is returned.
// Note: The details of each partial failure error are not printed here, you can refer to
// the example HandlePartialFailure.php to learn more.
if ($response->hasPartialFailureError()) {
printf(
"Partial failures occurred: '%s'.%s",
$response->getPartialFailureError()->getMessage(),
PHP_EOL
);
} else {
// Prints the result if exists.
/** @var CallConversionResult $uploadedCallConversion */
$uploadedCallConversion = $response->getResults()[0];
printf(
"Uploaded call conversion that occurred at '%s' for caller ID '%s' to the "
. "conversion action with resource name '%s'.%s",
$uploadedCallConversion->getCallStartDateTime(),
$uploadedCallConversion->getCallerId(),
$uploadedCallConversion->getConversionAction(),
PHP_EOL
);
}
}
Python
def main(
client,
customer_id,
conversion_action_id,
caller_id,
call_start_date_time,
conversion_date_time,
conversion_value,
conversion_custom_variable_id,
conversion_custom_variable_value,
ad_user_data_consent,
):
"""Imports offline call conversion values for calls related to your ads.
Args:
client: An initialized GoogleAdsClient instance.
customer_id: The client customer ID string.
conversion_action_id: The ID of the conversion action to upload to.
caller_id: The caller ID from which this call was placed. Caller ID is
expected to be in E.164 format with preceding '+' sign,
e.g. '+18005550100'.
call_start_date_time: The date and time at which the call occurred. The
format is 'yyyy-mm-dd hh:mm:ss+|-hh:mm',
e.g. '2021-01-01 12:32:45-08:00'.
conversion_date_time: The the date and time of the conversion (should be
after the click time). The format is 'yyyy-mm-dd hh:mm:ss+|-hh:mm',
e.g. '2021-01-01 12:32:45-08:00'.
conversion_value: The conversion value in the desired currency.
conversion_custom_variable_id: The ID of the conversion custom
variable to associate with the upload.
conversion_custom_variable_value: The str value of the conversion custom
variable to associate with the upload.
ad_user_data_consent: The consent status for ad user data for all
members in the job.
"""
# Get the ConversionUploadService client.
conversion_upload_service = client.get_service("ConversionUploadService")
# Create a call conversion in USD currency.
call_conversion = client.get_type("CallConversion")
call_conversion.conversion_action = client.get_service(
"ConversionActionService"
).conversion_action_path(customer_id, conversion_action_id)
call_conversion.caller_id = caller_id
call_conversion.call_start_date_time = call_start_date_time
call_conversion.conversion_date_time = conversion_date_time
call_conversion.conversion_value = conversion_value
call_conversion.currency_code = "USD"
if conversion_custom_variable_id and conversion_custom_variable_value:
conversion_custom_variable = client.get_type("CustomVariable")
conversion_custom_variable.conversion_custom_variable = (
conversion_custom_variable_id
)
conversion_custom_variable.value = conversion_custom_variable_value
call_conversion.custom_variables.append(conversion_custom_variable)
# Specifies whether user consent was obtained for the data you are
# uploading. For more details. see:
# https://www.google.com/about/company/user-consent-policy
if ad_user_data_consent:
call_conversion.consent.ad_user_data = client.enums.ConsentStatusEnum[
ad_user_data_consent
]
# Issue a request to upload the call conversion.
# Partial failure MUST be enabled for this request.
request = client.get_type("UploadCallConversionsRequest")
request.customer_id = customer_id
request.conversions = [call_conversion]
request.partial_failure = True
# NOTE: This request only uploads a single conversion, but if you have
# multiple conversions to upload, it's most efficient to upload them in a
# single request. See the following for per-request limits for reference:
# https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
upload_call_conversions_response = (
conversion_upload_service.upload_call_conversions(request=request)
)
# Print any partial errors returned.
if upload_call_conversions_response.partial_failure_error:
print(
"Partial error occurred: "
f"'{upload_call_conversions_response.partial_failure_error.message}'"
)
# Print the result if valid.
uploaded_call_conversion = upload_call_conversions_response.results[0]
if uploaded_call_conversion.call_start_date_time:
print(
"Uploaded call conversion that occurred at "
f"'{uploaded_call_conversion.call_start_date_time}' "
f"for caller ID '{uploaded_call_conversion.caller_id}' "
"to the conversion action with resource name "
f"'{uploaded_call_conversion.conversion_action}'."
)
Ruby
def upload_call_conversion(
customer_id,
conversion_action_id,
caller_id,
call_start_date_time,
conversion_date_time,
conversion_value,
conversion_custom_variable_id,
conversion_custom_variable_value,
ad_user_data_consent)
# GoogleAdsClient will read a config file from
# ENV['HOME']/google_ads_config.rb when called without parameters
client = Google::Ads::GoogleAds::GoogleAdsClient.new
# Create a call conversion by specifying currency as USD.
call_conversion = client.resource.call_conversion do |c|
c.conversion_action = client.path.conversion_action(
customer_id, conversion_action_id)
c.caller_id = caller_id
c.call_start_date_time = call_start_date_time
c.conversion_date_time = conversion_date_time
c.conversion_value = conversion_value
c.currency_code = "USD"
if conversion_custom_variable_id && conversion_custom_variable_value
c.custom_variables << client.resource.custom_variable do |cv|
cv.conversion_custom_variable = client.path.conversion_custom_variable(
customer_id, conversion_custom_variable_id)
cv.value = conversion_custom_variable_value
end
end
unless ad_user_data_consent.nil?
c.consent = client.resource.consent do |c|
# Specifies whether user consent was obtained for the data you are
# uploading. For more details, see:
# https://www.google.com/about/company/user-consent-policy
c.ad_user_data = ad_user_data_consent
end
end
end
# Issues a request to upload the call conversion.
response = client.service.conversion_upload.upload_call_conversions(
customer_id: customer_id,
# NOTE: This request only uploads a single conversion, but if you have
# multiple conversions to upload, it's most efficient to upload them in a
# single request. See the following for per-request limits for reference:
# https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
conversions: [call_conversion],
partial_failure: true
)
# Prints errors if any partial failure error is returned.
if response.partial_failure_error
failures = client.decode_partial_failure_error(response.partial_failure_error)
failures.each do |failure|
failure.errors.each do |error|
human_readable_error_path = error
.location
.field_path_elements
.map { |location_info|
if location_info.index
"#{location_info.field_name}[#{location_info.index}]"
else
"#{location_info.field_name}"
end
}.join(" > ")
errmsg = "error occured while adding operations " \
"#{human_readable_error_path}" \
" with value: #{error.trigger.string_value}" \
" because #{error.message.downcase}"
puts errmsg
end
end
else
# Print the result if valid.
uploaded_call_conversion = response.results.first
puts "Uploaded call conversion that occurred at " \
"#{uploaded_call_conversion.call_start_date_time} " \
"for caller ID " \
"#{uploaded_call_conversion.caller_id} " \
"to the conversion action with resource name " \
"#{uploaded_call_conversion.conversion_action}"
end
end
Perl
sub upload_call_conversion {
my (
$api_client, $customer_id,
$conversion_action_id, $caller_id,
$call_start_date_time, $conversion_date_time,
$conversion_value, $conversion_custom_variable_id,
$conversion_custom_variable_value, $ad_user_data_consent
) = @_;
# Create a call conversion by specifying currency as USD.
my $call_conversion =
Google::Ads::GoogleAds::V17::Services::ConversionUploadService::CallConversion
->new({
conversionAction =>
Google::Ads::GoogleAds::V17::Utils::ResourceNames::conversion_action(
$customer_id, $conversion_action_id
),
callerId => $caller_id,
callStartDateTime => $call_start_date_time,
conversionDateTime => $conversion_date_time,
conversionValue => $conversion_value,
currencyCode => "USD"
});
if ($conversion_custom_variable_id && $conversion_custom_variable_value) {
$call_conversion->{customVariables} = [
Google::Ads::GoogleAds::V17::Services::ConversionUploadService::CustomVariable
->new({
conversionCustomVariable =>
Google::Ads::GoogleAds::V17::Utils::ResourceNames::conversion_custom_variable(
$customer_id, $conversion_custom_variable_id
),
value => $conversion_custom_variable_value
})];
}
# Set the consent information, if provided.
if ($ad_user_data_consent) {
# Specify whether user consent was obtained for the data you are uploading.
# See https://www.google.com/about/company/user-consent-policy for details.
$call_conversion->{consent} =
Google::Ads::GoogleAds::V17::Common::Consent->new({
adUserData => $ad_user_data_consent
});
}
# Issue a request to upload the call conversion.
# NOTE: This request contains a single conversion as a demonstration.
# However, if you have multiple conversions to upload, it's best to
# upload multiple conversions per request instead of sending a separate
# request per conversion. See the following for per-request limits:
# https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
my $upload_call_conversions_response =
$api_client->ConversionUploadService()->upload_call_conversions({
customerId => $customer_id,
conversions => [$call_conversion],
partialFailure => "true"
});
# Print any partial errors returned.
if ($upload_call_conversions_response->{partialFailureError}) {
printf "Partial error encountered: '%s'.\n",
$upload_call_conversions_response->{partialFailureError}{message};
}
# Print the result if valid.
my $uploaded_call_conversion =
$upload_call_conversions_response->{results}[0];
if (%$uploaded_call_conversion) {
printf "Uploaded call conversion that occurred at '%s' " .
"for caller ID '%s' to the conversion action with resource name '%s'.\n",
$uploaded_call_conversion->{callStartDateTime},
$uploaded_call_conversion->{callerId},
$uploaded_call_conversion->{conversionAction};
}
return 1;
}