Prześlij konwersje telefoniczne

Za pomocą interfejsu Google Ads API można przesłać wywołanie offline konwersje na konto Google Ads. aby śledzić, kiedy reklamy prowadzą do połączeń telefonicznych, a kiedy te połączenia. na wartościowe działania klientów.

Nie można przesłać kliknięcia mobilnego typu „kliknij, aby połączyć” jako konwersji, jeśli nie ma Numer Google do przekazywania połączeń powiązany z połączeniem. Bez przekierowania Google nie ma pewności, że kliknięcie doprowadziło do połączenia, do konwersji. Jeśli prześlesz kliknięcie w ten sposób, zostanie ono zignorowane przez działanie powodujące konwersję.

Mapowanie na interfejs Google Ads wygląda tak samo jak w przypadku konwersji Przesłane pliki. Źródło, a potem kliknij Konwersje telefoniczne.

Tworzenie konwersji telefonicznej

Kilka kwestii, o których warto pamiętać podczas tworzenia obiektu CallConversion:

  • Od wersji 15 interfejsu Google Ads API musisz wypełniać pola consent parametru CallConversion obiekt.

  • Atrybut partial_failure elementu UploadCallConversionsRequest. powinna zawsze mieć wartość true. Postępuj zgodnie z częściowymi błędami podczas obsługi prawidłowych operacji zakończonych niepowodzeniem.

  • Jeśli natrafisz na TOO_RECENT_CONVERSION_ACTION lub TOO_RECENT_CALL wiadomość z odpowiedzią na prośbę o przesłanie konwersji, odczekaj 6 lub 12 godzin, , zanim spróbujesz ponownie pobrać wiersze z błędami.

  • Statystyki zaimportowanych konwersji pojawią się na Twoim koncie w ciągu maksymalnie 3 godzin koncie Google Ads.

  • Jeśli prześlesz zduplikowane konwersje (czyli tag CallConversion ze caller_id, conversion_date_time i conversion_action, który był poprzednio przesłany), zwracany jest błąd CALL_CONVERSION_ALREADY_EXISTS.

    • Jeśli jedno żądanie zawiera wiele operacji dla tej samej konwersji, zwracany jest błąd DUPLICATE_CALL_CONVERSION_IN_REQUEST.

Przesyłanie konwersji telefonicznej

Aby powiązać konwersje telefoniczne offline z działaniem powodującym konwersję, Potrzebne są następujące informacje: ID rozmówcy (numer telefonu), data i godzina konwersji, nazwa zasobu działania powodującego konwersję oraz opcjonalnie wartości konwersji i waluty na ConversionUploadService Więcej informacji o różnych danych wejściowych znajdziesz w Centrum pomocy Centrum pomocy. Kod opisuje też formaty różnych danych wejściowych.

Wymagania

Przy przesyłaniu pliku CallConversion

Aby uniknąć błędu ConversionUploadError.INVALID_CONVERSION_ACTION, funkcja Atrybut conversion_action musi odnosić się do ConversionAction, gdzie:

  • ConversionActionType to UPLOAD_CALLS

  • status z ConversionAction jest ENABLED. W przeciwnym razie operacja zakończy się niepowodzeniem z NO_CONVERSION_ACTION_FOUND .

  • ConversionAction występuje w kliencie konwersji Google Ads konto Google Ads tego kliknięcia.

Zalecamy też ustawienie wartości parametru ConversionAction.category na kategoria, która najlepiej opisuje Twoje konwersje.

Dodatkowo muszą być spełnione te warunki:

  • W czasie połączenia śledzenie konwersji było włączone Klient konwersji Google Ads konta Google Ads połączenia.

  • customer_id UploadCallConversionsRequest. musi być identyfikatorem klienta konwersji Google Ads klient konto Google Ads połączenia. W przeciwnym razie przesłanie konwersji spowoduje wygenerowanie ConversionUploadError.INVALID_CUSTOMER_FOR_CALL błąd.

  • Wartość conversion_value musi być większa niż lub równa 0.

  • Element conversion_date_time musi mieć określoną strefę czasową i format to jako yyyy-mm-dd HH:mm:ss+|-HH:mm, na przykład: 2022-01-01 19:32:45-05:00 (ignoruj czas letni) , Strefa czasowa może mieć dowolną prawidłową wartość: nie muszą odpowiadać strefie czasowej konta.

Przykładowy kod

Java

private void runExample(
    GoogleAdsClient googleAdsClient,
    long customerId,
    String conversionActionId,
    String callerId,
    String callStartDateTime,
    double conversionValue,
    Long conversionCustomVariableId,
    String conversionCustomVariableValue,
    ConsentStatus adUserDataConsent) {
  // Create a call conversion by specifying currency as USD.
  CallConversion.Builder conversionBuilder =
      CallConversion.newBuilder()
          .setConversionAction(conversionActionId)
          .setCallerId(callerId)
          .setCallStartDateTime(callStartDateTime)
          .setConversionValue(conversionValue)
          .setCurrencyCode("USD");

  if (conversionCustomVariableId != null && conversionCustomVariableValue != null) {
    conversionBuilder.addCustomVariables(
        CustomVariable.newBuilder()
            .setConversionCustomVariable(
                ResourceNames.conversionCustomVariable(customerId, conversionCustomVariableId))
            .setValue(conversionCustomVariableValue));
  }

  // Sets the consent information, if provided.
  if (adUserDataConsent != null) {
    // Specifies whether user consent was obtained for the data you are uploading. See
    // https://www.google.com/about/company/user-consent-policy for details.
    conversionBuilder.setConsent(Consent.newBuilder().setAdUserData(adUserDataConsent));
  }

  CallConversion conversion = conversionBuilder.build();

  // Uploads the call conversion to the API.
  try (ConversionUploadServiceClient conversionUploadServiceClient =
      googleAdsClient.getLatestVersion().createConversionUploadServiceClient()) {
    // Partial failure MUST be enabled for this request.

    // NOTE: This request contains a single conversion as a demonstration.  However, if you have
    // multiple conversions to upload, it's best to upload multiple conversions per request
    // instead of sending a separate request per conversion. See the following for per-request
    // limits:
    // https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
    UploadCallConversionsResponse response =
        conversionUploadServiceClient.uploadCallConversions(
            UploadCallConversionsRequest.newBuilder()
                .setCustomerId(String.valueOf(customerId))
                .setCustomerId(Long.toString(customerId))
                .addConversions(conversion)
                .setPartialFailure(true)
                .build());

    // Prints any partial failure errors returned.
    if (response.hasPartialFailureError()) {
      GoogleAdsFailure googleAdsFailure =
          ErrorUtils.getInstance().getGoogleAdsFailure(response.getPartialFailureError());
      googleAdsFailure
          .getErrorsList()
          .forEach(e -> System.out.println("Partial failure occurred: " + e.getMessage()));
      throw new RuntimeException(
          "Partial failure occurred " + response.getPartialFailureError().getMessage());
    }

    // Prints the result if valid.
    CallConversionResult result = response.getResults(0);
    System.out.printf(
        "Uploaded call conversion that occurred at '%' for caller ID '%' to the conversion"
            + " action with resource name '%'.%n",
        result.getCallStartDateTime(), result.getCallerId(), result.getConversionAction());
  }
}
      

C#

public void Run(GoogleAdsClient client, long customerId,
    long conversionActionId, string callerId, string callStartTime,
    string conversionTime, double conversionValue,
    long? conversionCustomVariableId, string conversionCustomVariableValue,
    ConsentStatus? adUserDataConsent)
{
    // Get the ConversionUploadService.
    ConversionUploadServiceClient conversionUploadService =
        client.GetService(Services.V17.ConversionUploadService);

    // Create a call conversion by specifying currency as USD.
    CallConversion callConversion = new CallConversion()
    {
        ConversionAction = ResourceNames.ConversionAction(customerId, conversionActionId),
        CallerId = callerId,
        CallStartDateTime = callStartTime,
        ConversionDateTime = conversionTime,
        ConversionValue = conversionValue,
        CurrencyCode = "USD",
    };

    if (adUserDataConsent != null)
    {
        // Specifies whether user consent was obtained for the data you are uploading. See
        // https://www.google.com/about/company/user-consent-policy
        // for details.
        callConversion.Consent = new Consent()
        {
            AdUserData = (ConsentStatus)adUserDataConsent
        };
    }

    if (conversionCustomVariableId != null &&
        !string.IsNullOrEmpty(conversionCustomVariableValue))
    {
        callConversion.CustomVariables.Add(new CustomVariable()
        {
            ConversionCustomVariable = ResourceNames.ConversionCustomVariable(
                customerId, conversionCustomVariableId.Value),
            Value = conversionCustomVariableValue
        });
    }

    UploadCallConversionsRequest request = new UploadCallConversionsRequest()
    {
        CustomerId = customerId.ToString(),
        Conversions = { callConversion },
        PartialFailure = true
    };

    try
    {
        // Issues a request to upload the call conversion. The partialFailure parameter
        // is set to true, and validateOnly parameter to false as required by this method
        // call.
        // NOTE: This request contains a single conversion as a demonstration.  However, if
        // you have multiple conversions to upload, it's best to upload multiple conversions
        // per request instead of sending a separate request per conversion. See the
        // following for per-request limits:
        // https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
        UploadCallConversionsResponse response =
            conversionUploadService.UploadCallConversions(request);

        // Since we set partialFailure = true, we can retrieve error messages (if any) from
        // the operation response.
        if (response.PartialFailureError != null)
        {
            Console.WriteLine("Call conversion upload failed.");

            // Retrieves the errors from the partial failure and prints them.
            List<GoogleAdsError> errors =
                response.PartialFailure.GetErrorsByOperationIndex(0);
            foreach (GoogleAdsError error in errors)
            {
                Console.WriteLine($"Operation failed with error: {error}.");
            }
        }
        else
        {
            // Prints the result.
            CallConversionResult uploadedCallConversion = response.Results[0];
            Console.WriteLine($"Uploaded call conversion that occurred at " +
                $"'{uploadedCallConversion.CallStartDateTime}' for caller ID " +
                $"'{uploadedCallConversion.CallerId}' to the conversion action with " +
                $"resource name '{uploadedCallConversion.ConversionAction}'.");
        }

    }
    catch (GoogleAdsException e)
    {
        Console.WriteLine("Failure:");
        Console.WriteLine($"Message: {e.Message}");
        Console.WriteLine($"Failure: {e.Failure}");
        Console.WriteLine($"Request ID: {e.RequestId}");
        throw;
    }
}
      

PHP

public static function runExample(
    GoogleAdsClient $googleAdsClient,
    int $customerId,
    int $conversionActionId,
    string $callerId,
    string $callStartDateTime,
    string $conversionDateTime,
    float $conversionValue,
    ?string $conversionCustomVariableId,
    ?string $conversionCustomVariableValue,
    ?int $adUserDataConsent
) {
    // Creates a call conversion by specifying currency as USD.
    $callConversion = new CallConversion([
        'conversion_action' =>
            ResourceNames::forConversionAction($customerId, $conversionActionId),
        'caller_id' => $callerId,
        'call_start_date_time' => $callStartDateTime,
        'conversion_date_time' => $conversionDateTime,
        'conversion_value' => $conversionValue,
        'currency_code' => 'USD'
    ]);
    if (!is_null($conversionCustomVariableId) && !is_null($conversionCustomVariableValue)) {
        $callConversion->setCustomVariables([new CustomVariable([
            'conversion_custom_variable' => ResourceNames::forConversionCustomVariable(
                $customerId,
                $conversionCustomVariableId
            ),
            'value' => $conversionCustomVariableValue
        ])]);
    }
    // Sets the consent information, if provided.
    if (!empty($adUserDataConsent)) {
        // Specifies whether user consent was obtained for the data you are uploading. See
        // https://www.google.com/about/company/user-consent-policy for details.
        $callConversion->setConsent(new Consent(['ad_user_data' => $adUserDataConsent]));
    }

    // Issues a request to upload the call conversion.
    $conversionUploadServiceClient = $googleAdsClient->getConversionUploadServiceClient();
    // NOTE: This request contains a single conversion as a demonstration.  However, if you have
    // multiple conversions to upload, it's best to upload multiple conversions per request
    // instead of sending a separate request per conversion. See the following for per-request
    // limits:
    // https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
    $response = $conversionUploadServiceClient->uploadCallConversions(
        // Partial failure MUST be enabled for this request.
        UploadCallConversionsRequest::build($customerId, [$callConversion], true)
    );

    // Prints the status message if any partial failure error is returned.
    // Note: The details of each partial failure error are not printed here, you can refer to
    // the example HandlePartialFailure.php to learn more.
    if ($response->hasPartialFailureError()) {
        printf(
            "Partial failures occurred: '%s'.%s",
            $response->getPartialFailureError()->getMessage(),
            PHP_EOL
        );
    } else {
        // Prints the result if exists.
        /** @var CallConversionResult $uploadedCallConversion */
        $uploadedCallConversion = $response->getResults()[0];
        printf(
            "Uploaded call conversion that occurred at '%s' for caller ID '%s' to the "
            . "conversion action with resource name '%s'.%s",
            $uploadedCallConversion->getCallStartDateTime(),
            $uploadedCallConversion->getCallerId(),
            $uploadedCallConversion->getConversionAction(),
            PHP_EOL
        );
    }
}
      

Python

def main(
    client,
    customer_id,
    conversion_action_id,
    caller_id,
    call_start_date_time,
    conversion_date_time,
    conversion_value,
    conversion_custom_variable_id,
    conversion_custom_variable_value,
    ad_user_data_consent,
):
    """Imports offline call conversion values for calls related to your ads.

    Args:
        client: An initialized GoogleAdsClient instance.
        customer_id: The client customer ID string.
        conversion_action_id: The ID of the conversion action to upload to.
        caller_id: The caller ID from which this call was placed. Caller ID is
            expected to be in E.164 format with preceding '+' sign,
            e.g. '+18005550100'.
        call_start_date_time: The date and time at which the call occurred. The
            format is 'yyyy-mm-dd hh:mm:ss+|-hh:mm',
            e.g. '2021-01-01 12:32:45-08:00'.
        conversion_date_time: The the date and time of the conversion (should be
            after the click time). The format is 'yyyy-mm-dd hh:mm:ss+|-hh:mm',
            e.g. '2021-01-01 12:32:45-08:00'.
        conversion_value: The conversion value in the desired currency.
        conversion_custom_variable_id: The ID of the conversion custom
            variable to associate with the upload.
        conversion_custom_variable_value: The str value of the conversion custom
            variable to associate with the upload.
        ad_user_data_consent: The consent status for ad user data for all
            members in the job.
    """
    # Get the ConversionUploadService client.
    conversion_upload_service = client.get_service("ConversionUploadService")

    # Create a call conversion in USD currency.
    call_conversion = client.get_type("CallConversion")
    call_conversion.conversion_action = client.get_service(
        "ConversionActionService"
    ).conversion_action_path(customer_id, conversion_action_id)
    call_conversion.caller_id = caller_id
    call_conversion.call_start_date_time = call_start_date_time
    call_conversion.conversion_date_time = conversion_date_time
    call_conversion.conversion_value = conversion_value
    call_conversion.currency_code = "USD"

    if conversion_custom_variable_id and conversion_custom_variable_value:
        conversion_custom_variable = client.get_type("CustomVariable")
        conversion_custom_variable.conversion_custom_variable = (
            conversion_custom_variable_id
        )
        conversion_custom_variable.value = conversion_custom_variable_value
        call_conversion.custom_variables.append(conversion_custom_variable)

    # Specifies whether user consent was obtained for the data you are
    # uploading. For more details. see:
    # https://www.google.com/about/company/user-consent-policy
    if ad_user_data_consent:
        call_conversion.consent.ad_user_data = client.enums.ConsentStatusEnum[
            ad_user_data_consent
        ]

    # Issue a request to upload the call conversion.
    # Partial failure MUST be enabled for this request.
    request = client.get_type("UploadCallConversionsRequest")
    request.customer_id = customer_id
    request.conversions = [call_conversion]
    request.partial_failure = True
    # NOTE: This request only uploads a single conversion, but if you have
    # multiple conversions to upload, it's most efficient to upload them in a
    # single request. See the following for per-request limits for reference:
    # https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
    upload_call_conversions_response = (
        conversion_upload_service.upload_call_conversions(request=request)
    )

    # Print any partial errors returned.
    if upload_call_conversions_response.partial_failure_error:
        print(
            "Partial error occurred: "
            f"'{upload_call_conversions_response.partial_failure_error.message}'"
        )

    # Print the result if valid.
    uploaded_call_conversion = upload_call_conversions_response.results[0]
    if uploaded_call_conversion.call_start_date_time:
        print(
            "Uploaded call conversion that occurred at "
            f"'{uploaded_call_conversion.call_start_date_time}' "
            f"for caller ID '{uploaded_call_conversion.caller_id}' "
            "to the conversion action with resource name "
            f"'{uploaded_call_conversion.conversion_action}'."
        )
      

Ruby

def upload_call_conversion(
  customer_id,
  conversion_action_id,
  caller_id,
  call_start_date_time,
  conversion_date_time,
  conversion_value,
  conversion_custom_variable_id,
  conversion_custom_variable_value,
  ad_user_data_consent)
  # GoogleAdsClient will read a config file from
  # ENV['HOME']/google_ads_config.rb when called without parameters
  client = Google::Ads::GoogleAds::GoogleAdsClient.new

  # Create a call conversion by specifying currency as USD.
  call_conversion = client.resource.call_conversion do |c|
    c.conversion_action = client.path.conversion_action(
      customer_id, conversion_action_id)
    c.caller_id = caller_id
    c.call_start_date_time = call_start_date_time
    c.conversion_date_time = conversion_date_time
    c.conversion_value = conversion_value
    c.currency_code = "USD"
    if conversion_custom_variable_id && conversion_custom_variable_value
      c.custom_variables << client.resource.custom_variable do |cv|
        cv.conversion_custom_variable = client.path.conversion_custom_variable(
          customer_id, conversion_custom_variable_id)
        cv.value = conversion_custom_variable_value
      end
    end

    unless ad_user_data_consent.nil?
      c.consent = client.resource.consent do |c|
        # Specifies whether user consent was obtained for the data you are
        # uploading. For more details, see:
        # https://www.google.com/about/company/user-consent-policy
        c.ad_user_data = ad_user_data_consent
      end
    end
  end

  # Issues a request to upload the call conversion.
  response = client.service.conversion_upload.upload_call_conversions(
    customer_id: customer_id,
    # NOTE: This request only uploads a single conversion, but if you have
    # multiple conversions to upload, it's most efficient to upload them in a
    # single request. See the following for per-request limits for reference:
    # https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
    conversions: [call_conversion],
    partial_failure: true
  )

  # Prints errors if any partial failure error is returned.
  if response.partial_failure_error
    failures = client.decode_partial_failure_error(response.partial_failure_error)
    failures.each do |failure|
      failure.errors.each do |error|
        human_readable_error_path = error
          .location
          .field_path_elements
          .map { |location_info|
            if location_info.index
              "#{location_info.field_name}[#{location_info.index}]"
            else
              "#{location_info.field_name}"
            end
          }.join(" > ")

        errmsg =  "error occured while adding operations " \
          "#{human_readable_error_path}" \
          " with value: #{error.trigger.string_value}" \
          " because #{error.message.downcase}"
        puts errmsg
      end
    end
  else
    # Print the result if valid.
    uploaded_call_conversion = response.results.first
    puts "Uploaded call conversion that occurred at " \
      "#{uploaded_call_conversion.call_start_date_time} " \
      "for caller ID " \
      "#{uploaded_call_conversion.caller_id} " \
      "to the conversion action with resource name " \
      "#{uploaded_call_conversion.conversion_action}"
  end
end
      

Perl

sub upload_call_conversion {
  my (
    $api_client,                       $customer_id,
    $conversion_action_id,             $caller_id,
    $call_start_date_time,             $conversion_date_time,
    $conversion_value,                 $conversion_custom_variable_id,
    $conversion_custom_variable_value, $ad_user_data_consent
  ) = @_;

  # Create a call conversion by specifying currency as USD.
  my $call_conversion =
    Google::Ads::GoogleAds::V17::Services::ConversionUploadService::CallConversion
    ->new({
      conversionAction =>
        Google::Ads::GoogleAds::V17::Utils::ResourceNames::conversion_action(
        $customer_id, $conversion_action_id
        ),
      callerId           => $caller_id,
      callStartDateTime  => $call_start_date_time,
      conversionDateTime => $conversion_date_time,
      conversionValue    => $conversion_value,
      currencyCode       => "USD"
    });

  if ($conversion_custom_variable_id && $conversion_custom_variable_value) {
    $call_conversion->{customVariables} = [
      Google::Ads::GoogleAds::V17::Services::ConversionUploadService::CustomVariable
        ->new({
          conversionCustomVariable =>
            Google::Ads::GoogleAds::V17::Utils::ResourceNames::conversion_custom_variable(
            $customer_id, $conversion_custom_variable_id
            ),
          value => $conversion_custom_variable_value
        })];
  }

  # Set the consent information, if provided.
  if ($ad_user_data_consent) {
    # Specify whether user consent was obtained for the data you are uploading.
    # See https://www.google.com/about/company/user-consent-policy for details.
    $call_conversion->{consent} =
      Google::Ads::GoogleAds::V17::Common::Consent->new({
        adUserData => $ad_user_data_consent
      });
  }

  # Issue a request to upload the call conversion.
  # NOTE: This request contains a single conversion as a demonstration.
  # However, if you have multiple conversions to upload, it's best to
  # upload multiple conversions per request instead of sending a separate
  # request per conversion. See the following for per-request limits:
  # https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
  my $upload_call_conversions_response =
    $api_client->ConversionUploadService()->upload_call_conversions({
      customerId     => $customer_id,
      conversions    => [$call_conversion],
      partialFailure => "true"
    });

  # Print any partial errors returned.
  if ($upload_call_conversions_response->{partialFailureError}) {
    printf "Partial error encountered: '%s'.\n",
      $upload_call_conversions_response->{partialFailureError}{message};
  }

  # Print the result if valid.
  my $uploaded_call_conversion =
    $upload_call_conversions_response->{results}[0];
  if (%$uploaded_call_conversion) {
    printf "Uploaded call conversion that occurred at '%s' " .
      "for caller ID '%s' to the conversion action with resource name '%s'.\n",
      $uploaded_call_conversion->{callStartDateTime},
      $uploaded_call_conversion->{callerId},
      $uploaded_call_conversion->{conversionAction};
  }

  return 1;
}