Utwórz korekty sezonowe

Korekty sezonowe to zaawansowane narzędzie, które pozwala przekazywać informacje inteligentnemu Określanie stawek oczekiwanych zmian współczynników konwersji dla nadchodzących wydarzeń. Dla: Więcej informacji o tym, jak działają korekty sezonowe, znajdziesz w artykule na temat korekt sezonowych stronie pomocy.

Automatyczne tworzenie korekt sezonowych za pomocą funkcji BiddingSeasonalityAdjustments

Zakres

BiddingSeasonalityAdjustments ma wymagane scope, które można ustawić na następujące wartości. Ustawiono dodatkowe opcje konfiguracji specyficzne dla zakresu zgodnie z używanym zakresem.

  • CAMPAIGN – dostosowanie zostanie zastosowane do określonych kampanii. Ustaw parametr campaigns na listę nazw zasobów kampanii, do których obowiązywać będzie dostosowanie.
    • Maksymalna liczba kampanii na BiddingSeasonalityAdjustment to 2000.
  • CHANNEL – dostosowanie zostanie zastosowane do kampanii, które należą do określonego typy kanałów. Ustaw parametr advertising_channel_types do listy AdvertisingChannelTypes, do której to pole obowiązywać będzie dostosowanie.

Urządzenia

Oprócz ich zakresu korekty sezonowe można skonfigurować za pomocą: opcjonalną listę typów urządzeń, na których będzie mieć zastosowanie dana korekta. Jeśli devices jest ustawiony, atrybut korekta sezonowa zostanie zastosowana tylko do ruchu z określonego urządzenia . Jeśli go nie podasz, dostosowanie zostanie uwzględnione w przypadku wszystkich typów urządzeń.

Daty, godziny i modyfikator współczynnika konwersji

Poza zakresem i urządzeniami opcjonalnymi każda korekta sezonowa ma też start_date_time i end_date_time i conversion_rate_modifier. Data i godziny określają przyszły przedział czasu, którego dotyczy korekta, a modyfikator to mnożnik oczekiwanego współczynnika konwersji. Data godziny są podane w strefie czasowej konta.

Przykład

Z przykładu poniżej dowiesz się, jak utworzyć korektę sezonową ze Zakres: CHANNEL. W sekcjach widocznych w komentarzach widać, jak określić kampanie, jeśli zamiast tego ustawić zakres CAMPAIGN.

Java

BiddingSeasonalityAdjustment seasonalityAdjustment =
    BiddingSeasonalityAdjustment.newBuilder()
        // A unique name is required for every seasonality adjustment.
        .setName("Seasonality adjustment #" + getPrintableDateTime())
        // The CHANNEL scope applies the conversionRateModifier to all campaigns of specific
        // advertising channel types. In this example, the conversionRateModifier will only
        // apply to Search campaigns. Use the CAMPAIGN scope to instead limit the scope to
        // specific campaigns.
        .setScope(SeasonalityEventScope.CHANNEL)
        .addAdvertisingChannelTypes(AdvertisingChannelType.SEARCH)
        // If setting scope CAMPAIGN, add individual campaign resource name(s) according to
        // the commented out line below.
        // .addCampaigns("INSERT_CAMPAIGN_RESOURCE_NAME_HERE")
        .setStartDateTime(startDateTime)
        .setEndDateTime(endDateTime)
        // The conversionRateModifier is the expected future conversion rate change. When this
        // field is unset or set to 1.0, no adjustment will be applied to traffic. The allowed
        // range is 0.1 to 10.0.
        .setConversionRateModifier(conversionRateModifier)
        .build();

BiddingSeasonalityAdjustmentOperation operation =
    BiddingSeasonalityAdjustmentOperation.newBuilder()
        .setCreate(seasonalityAdjustment)
        .build();

MutateBiddingSeasonalityAdjustmentsResponse response =
    seasonalityAdjustmentServiceClient.mutateBiddingSeasonalityAdjustments(
        customerId.toString(), ImmutableList.of(operation));
System.out.printf(
    "Added seasonality adjustment with resource name: %s%n",
    response.getResults(0).getResourceName());
AddBiddingSeasonalityAdjustment.java

C#

BiddingSeasonalityAdjustment seasonalityAdjustment =
    new BiddingSeasonalityAdjustment()
    {
        // A unique name is required for every seasonality adjustment.
        Name = "Seasonality adjustment #" + ExampleUtilities.GetRandomString(),
        // The CHANNEL scope applies the conversionRateModifier to all campaigns of
        // specific advertising channel types. In this example, the
        // conversionRateModifier will only apply to Search campaigns. Use the
        // CAMPAIGN scope to instead limit the scope to specific campaigns.
        Scope = SeasonalityEventScope.Channel,
        AdvertisingChannelTypes = { AdvertisingChannelType.Search },
        // If setting scope CAMPAIGN, add individual campaign resource name(s)
        // according to the commented out line below.
        // Campaigns = { "INSERT_CAMPAIGN_RESOURCE_NAME_HERE" },
        // The date range should be less than 14 days.
        StartDateTime = startDateTime,
        EndDateTime = endDateTime,
        // The conversionRateModifier is the expected future conversion rate change.
        // When this field is unset or set to 1.0, no adjustment will be applied to
        // traffic. The allowed range is 0.1 to 10.0.
        ConversionRateModifier = conversionRateModifier
    };

BiddingSeasonalityAdjustmentOperation operation =
    new BiddingSeasonalityAdjustmentOperation()
    {
        Create = seasonalityAdjustment
    };

try
{
    MutateBiddingSeasonalityAdjustmentsResponse response =
        biddingSeasonalityAdjustmentService.MutateBiddingSeasonalityAdjustments(
            customerId.ToString(), new[] { operation });
    Console.WriteLine($"Added seasonality adjustment with resource name: " +
        $"{response.Results[0].ResourceName}");
}
catch (GoogleAdsException e)
{
    Console.WriteLine("Failure:");
    Console.WriteLine($"Message: {e.Message}");
    Console.WriteLine($"Failure: {e.Failure}");
    Console.WriteLine($"Request ID: {e.RequestId}");
    throw;
}
AddBiddingSeasonalityAdjustment.cs

PHP

// Creates a bidding seasonality adjustment.
$seasonalityAdjustment = new BiddingSeasonalityAdjustment([
    // A unique name is required for every seasonality adjustment.
    'name' => 'Seasonality adjustment #' . Helper::getPrintableDatetime(),
    // The CHANNEL scope applies the conversionRateModifier to all campaigns of specific
    // advertising channel types. In this example, the conversionRateModifier will only
    // apply to Search campaigns. Use the CAMPAIGN scope to instead limit the scope to
    // specific campaigns.
    'scope' => SeasonalityEventScope::CHANNEL,
    'advertising_channel_types' => [AdvertisingChannelType::SEARCH],
    // If setting scope CAMPAIGN, add individual campaign resource name(s) according to
    // the commented out line below.
    // 'campaigns' => ['INSERT_CAMPAIGN_RESOURCE_NAME_HERE'],
    'start_date_time' => $startDateTime,
    'end_date_time' => $endDateTime,
    // The conversionRateModifier is the expected future conversion rate change. When this
    // field is unset or set to 1.0, no adjustment will be applied to traffic. The allowed
    // range is 0.1 to 10.0.
    'conversion_rate_modifier' => $conversionRateModifier
]);

// Creates a bidding seasonality adjustment operation.
$biddingSeasonalityAdjustmentOperation = new BiddingSeasonalityAdjustmentOperation();
$biddingSeasonalityAdjustmentOperation->setCreate($seasonalityAdjustment);

// Submits the bidding seasonality adjustment operation to add the bidding seasonality
// adjustment.
$biddingSeasonalityAdjustmentServiceClient =
    $googleAdsClient->getBiddingSeasonalityAdjustmentServiceClient();
$response = $biddingSeasonalityAdjustmentServiceClient->mutateBiddingSeasonalityAdjustments(
    MutateBiddingSeasonalityAdjustmentsRequest::build(
        $customerId,
        [$biddingSeasonalityAdjustmentOperation]
    )
);

printf(
    "Added seasonality adjustment with resource name: '%s'.%s",
    $response->getResults()[0]->getResourceName(),
    PHP_EOL
);
AddBiddingSeasonalityAdjustment.php

Python

bidding_seasonality_adjustment_service = client.get_service(
    "BiddingSeasonalityAdjustmentService"
)
operation = client.get_type("BiddingSeasonalityAdjustmentOperation")
bidding_seasonality_adjustment = operation.create
# A unique name is required for every seasonality adjustment.
bidding_seasonality_adjustment.name = f"Seasonality adjustment #{uuid4()}"
# The CHANNEL scope applies the conversion_rate_modifier to all campaigns of
# specific advertising channel types. In this example, the
# conversion_rate_modifier will only apply to Search campaigns. Use the
# CAMPAIGN scope to instead limit the scope to specific campaigns.
bidding_seasonality_adjustment.scope = (
    client.enums.SeasonalityEventScopeEnum.CHANNEL
)
bidding_seasonality_adjustment.advertising_channel_types.append(
    client.enums.AdvertisingChannelTypeEnum.SEARCH
)
# If setting scope CAMPAIGN, add individual campaign resource name(s)
# according to the commented out line below.
#
# bidding_seasonality_adjustment.campaigns.append(
#     "INSERT_CAMPAIGN_RESOURCE_NAME_HERE"
# )

bidding_seasonality_adjustment.start_date_time = start_date_time
bidding_seasonality_adjustment.end_date_time = end_date_time
# The conversion_rate_modifier is the expected future conversion rate
# change. When this field is unset or set to 1.0, no adjustment will be
# applied to traffic. The allowed range is 0.1 to 10.0.
bidding_seasonality_adjustment.conversion_rate_modifier = (
    conversion_rate_modifier
)

response = bidding_seasonality_adjustment_service.mutate_bidding_seasonality_adjustments(
    customer_id=customer_id, operations=[operation]
)

resource_name = response.results[0].resource_name

print(f"Added seasonality adjustment with resource name: '{resource_name}'")
add_bidding_seasonality_adjustment.py

Ruby

client = Google::Ads::GoogleAds::GoogleAdsClient.new

operation = client.operation.create_resource.bidding_seasonality_adjustment do |bsa|
  # A unique name is required for every seasonality adjustment.
  bsa.name = "Seasonality Adjustment #{(Time.new.to_f * 1000).to_i}"

  # The CHANNEL scope applies the conversion_rate_modifier to all campaigns
  # of specific advertising channel types. In this example, the
  # conversion_rate_modifier will only apply to Search campaigns. Use the
  # CAMPAIGN scope to instead limit the scope to specific campaigns.
  bsa.scope = :CHANNEL
  bsa.advertising_channel_types << :SEARCH

  # If setting scope CAMPAIGN, add individual campaign resource name(s)
  # according to the commented out line below.
  #
  # bsa.campaigns << "INSERT_CAMPAIGN_RESOURCE_NAME_HERE"

  bsa.start_date_time = start_date_time
  bsa.end_date_time = end_date_time

  # The conversion_rate_modifier is the expected future conversion rate
  # change. When this field is unset or set to 1.0, no adjustment will be
  # applied to traffic. The allowed range is 0.1 to 10.0.
  bsa.conversion_rate_modifier = conversion_rate_modifier
end

response = client.service.bidding_seasonality_adjustment.mutate_bidding_seasonality_adjustments(
  customer_id: customer_id,
  operations: [operation],
)

puts "Added seasonality adjustment with resource name #{response.results.first.resource_name}"
add_bidding_seasonality_adjustment.rb

Perl

my $seasonality_adjustment =
  Google::Ads::GoogleAds::V17::Resources::BiddingSeasonalityAdjustment->new({
    # A unique name is required for every seasonality adjustment.
    name => "Seasonality adjustment #" . uniqid(),
    # The CHANNEL scope applies the conversion_rate_modifier to all campaigns
    # of specific advertising channel types. In this example, the conversion_rate_modifier
    # will only apply to Search campaigns. Use the CAMPAIGN scope to instead
    # limit the scope to specific campaigns.
    scope                   => CHANNEL,
    advertisingChannelTypes => [SEARCH],
    # If setting scope CAMPAIGN, add individual campaign resource name(s)
    # according to the commented out line below.
    # campaigns     => ["INSERT_CAMPAIGN_RESOURCE_NAME_HERE"],
    startDateTime => $start_date_time,
    endDateTime   => $end_date_time,
    # The conversion_rate_modifier is the expected future conversion rate change.
    # When this field is unset or set to 1.0, no adjustment will be applied to traffic.
    # The allowed range is 0.1 to 10.0.
    conversionRateModifier => $conversion_rate_modifier
  });

my $operation =
  Google::Ads::GoogleAds::V17::Services::BiddingSeasonalityAdjustmentService::BiddingSeasonalityAdjustmentOperation
  ->new({
    create => $seasonality_adjustment
  });

my $response = $api_client->BiddingSeasonalityAdjustmentService()->mutate({
    customerId => $customer_id,
    operations => [$operation]});

printf "Added seasonality adjustment with resource name: '%s'.\n",
  $response->{results}[0]{resourceName};
add_bidding_seasonality_adjustment.pl

Wstecz
Zarządzaj modyfikatorami stawek
Dalej
Tworzenie wykluczeń danych