ميزانية الحساب

تتحكّم ميزانيات الحساب في ما يمكن أن ينفقه الحساب خلال فترة زمنية محدّدة. من خلال تحديد سمات الميزانية مثل حدّ الإنفاق ووقت البدء ووقت الانتهاء هم إلى إحدى إعدادات الفوترة في الحساب، للإشارة إلى أي إعدادات سيتم إرسال فواتير حساب الدفعات. يمكنك إنشاء وتعديل وإزالة AccountBudget من خلال إرسال كائنات AccountBudgetProposal.

تمثل عناصر AccountBudget النتيجة النهائية لتطبيق العروض. بعد الموافقة على العرض، تتغير بياناته (خاضعة لأي التسويات) إلى إنشاء ميزانية حساب جديدة أو تحديث إلى تحديث حالي. ويعتمد ذلك على proposal_type المحددة في الطلب.

AccountBudgetProposalType الوصف
CREATE ينشئ ميزانية حساب جديدة، ويجب الموافقة عليها قبل الاستخدام.
UPDATE لتعديل ميزانية حساب حالية.
END تضبط وقت انتهاء ميزانية الحساب على الوقت الحالي.
REMOVE إزالة ميزانية حساب قبل وقت بدئها.

توضّح الأقسام التالية سلوك كل نوع اقتراح.

إنشاء اقتراح ميزانية الحساب

يتيح لك إنشاء ميزانية حساب جديدة التحكّم في إنفاق العميل سلوكك. يمكنك استخدام AccountBudgetProposalService لإنشاء تصميم جديد AccountBudgetProposal يجب عليك تعيين proposal_type إلى CREATE لتحديد أنه يجب إنشاء ميزانية جديدة. ارجع إلى الإدارة في هذا الدليل للعمليات الأخرى.

لا تنسَ استخدام إعداد فوترة مع حساب دفعات كنت تكتب فيه الوصول إليه. يُرجى الرجوع إلى دليل إعداد الفوترة التفاصيل.

يوضح المثال التالي كيفية إنشاء اقتراح ميزانية جديد.

Java

private void runExample(GoogleAdsClient googleAdsClient, long customerId, long billingSetupId) {
  // Creates an AccountBudgetProposal. This will be reviewed offline by Google Ads, and if
  // approved will become an AccountBudget.
  AccountBudgetProposal proposal =
      AccountBudgetProposal.newBuilder()
          .setBillingSetup(ResourceNames.billingSetup(customerId, billingSetupId))
          .setProposalType(AccountBudgetProposalType.CREATE)
          .setProposedName("Account Budget (example)")

          // Specifies the account budget starts immediately.
          .setProposedStartTimeType(TimeType.NOW)
          // Alternatively you can specify a specific start time. Refer to the
          // AccountBudgetProposal
          // resource documentation for allowed formats.
          //
          // .setProposedStartDateTime("2020-01-02 03:04:05")

          // Specifies that the budget runs forever.
          .setProposedEndTimeType(TimeType.FOREVER)
          // Alternatively you can specify a specific end time. Allowed formats are as above.
          // .setProposedEndDateTime("2021-02-03 04:05:06")

          // Optional: sets notes for the budget. These are free text and do not effect budget
          // delivery.
          // .setProposedNotes("Received prepayment of $0.01")

          // Sets the spending limit to 0.01, measured in the Google Ads account currency.
          .setProposedSpendingLimitMicros(10_000)

          // Optional: sets PO number for record keeping. This value is at the user's
          // discretion, and has no effect on Google Billing & Payments.
          // .setProposedPurchaseOrderNumber("PO number 12345")
          .build();

  // Creates an operation which will add the new AccountBudgetProposal.
  AccountBudgetProposalOperation operation =
      AccountBudgetProposalOperation.newBuilder().setCreate(proposal).build();

  try (AccountBudgetProposalServiceClient accountBudgetProposalServiceClient =
      googleAdsClient.getLatestVersion().createAccountBudgetProposalServiceClient()) {
    // Sends the request to the Account Budget Proposal Service.
    MutateAccountBudgetProposalResponse response =
        accountBudgetProposalServiceClient.mutateAccountBudgetProposal(
            String.valueOf(customerId), operation);

    System.out.printf(
        "Account budget proposal created: %s.%n", response.getResult().getResourceName());
  }
}
      

#C

public void Run(GoogleAdsClient client, long customerId, long billingSetupId)
{
    // Get the AccountBudgetProposalServiceClient.
    AccountBudgetProposalServiceClient proposalService =
        client.GetService(Services.V17.AccountBudgetProposalService);

    // Create an AccountBudgetProposal. The proposal will be reviewed offline by Google Ads,
    // and if approved will become an AccountBudget.
    AccountBudgetProposal proposal = new AccountBudgetProposal()
    {
        BillingSetup = ResourceNames.BillingSetup(customerId, billingSetupId),
        ProposalType = AccountBudgetProposalType.Create,
        ProposedName = "Account Budget (example)",

        // Specify the account budget starts immediately
        ProposedStartTimeType = TimeType.Now,
        // Alternatively, you can specify a specific start time. Refer to the
        // AccountBudgetProposal resource documentation for allowed formats.
        //
        //ProposedStartDateTime = "2020-01-02 03:04:05",

        // Specify that the budget runs forever.
        ProposedEndTimeType = TimeType.Forever,
        // Alternatively you can specify a specific end time. Allowed formats are as above.
        //ProposedEndDateTime = "2021-02-03 04:05:06",

        // Optional: set notes for the budget. These are free text and do not effect budget
        // delivery.
        //ProposedNotes = "Received prepayment of $0.01",

        // Set the spending limit to 0.01, measured in the Google Ads account currency.
        ProposedSpendingLimitMicros = 10_000

        // Optional: set PO number for record keeping. This value is at the user's
        // discretion, and has no effect on Google Billing & Payments.
        //ProposedPurchaseOrderNumber = "PO number 12345"
    };

    // Create an operation which will add the new AccountBudgetProposal
    AccountBudgetProposalOperation operation = new AccountBudgetProposalOperation()
    {
        Create = proposal
    };

    try
    {
        // Send the request to the Account Budget Proposal Service.
        MutateAccountBudgetProposalResponse response = proposalService.
            MutateAccountBudgetProposal(customerId.ToString(), operation);

        // Display the results.
        Console.WriteLine($"Account budget proposal '{response.Result.ResourceName}' " +
            "was created.");
    }
    catch (GoogleAdsException e)
    {
        Console.WriteLine("Failure:");
        Console.WriteLine($"Message: {e.Message}");
        Console.WriteLine($"Failure: {e.Failure}");
        Console.WriteLine($"Request ID: {e.RequestId}");
        throw;
    }
}
      

PHP

public static function runExample(
    GoogleAdsClient $googleAdsClient,
    int $customerId,
    int $billingSetupId
) {
    // Constructs an account budget proposal.
    $accountBudgetProposal = new AccountBudgetProposal([
        'billing_setup' => ResourceNames::forBillingSetup($customerId, $billingSetupId),
        'proposal_type' => AccountBudgetProposalType::CREATE,
        'proposed_name' => 'Account Budget (example)',
        // Specifies the account budget starts immediately.
        'proposed_start_time_type' => TimeType::NOW,
        // Alternatively you can specify a specific start time. Refer to the
        // AccountBudgetProposal class for allowed formats.
        //
        // 'proposed_start_date_time' => '2020-01-02 03:04:05',

        // Specify that the budget runs forever.
        'proposed_end_time_type' => TimeType::FOREVER,
        // Alternatively you can specify a specific end time. Allowed formats are as above.
        // 'proposed_end_date_time' => '2021-02-03 04:05:06',

        // Optional: set notes for the budget. These are free text and do not effect budget
        // delivery.
        // 'proposed_notes' => 'Received prepayment of $0.01',

        // Optional: set PO number for record keeping. This value is at the user's
        // discretion, and has no effect on Google Billing & Payments.
        // 'proposed_purchase_order_number' => 'PO number 12345',

        // Set the spending limit to 0.01, measured in the Google Ads account currency.
        'proposed_spending_limit_micros' => 10000
    ]);

    $accountBudgetProposalOperation = new AccountBudgetProposalOperation();
    $accountBudgetProposalOperation->setCreate($accountBudgetProposal);

    // Issues a mutate request to add the account budget proposal.
    $accountBudgetProposalServiceClient =
        $googleAdsClient->getAccountBudgetProposalServiceClient();
    $response = $accountBudgetProposalServiceClient->mutateAccountBudgetProposal(
        MutateAccountBudgetProposalRequest::build($customerId, $accountBudgetProposalOperation)
    );

    printf(
        "Added an account budget proposal with resource name '%s'.%s",
        $response->getResult()->getResourceName(),
        PHP_EOL
    );
}
      

Python

def main(client, customer_id, billing_setup_id):
    account_budget_proposal_service = client.get_service(
        "AccountBudgetProposalService"
    )
    billing_setup_service = client.get_service("BillingSetupService")

    account_budget_proposal_operation = client.get_type(
        "AccountBudgetProposalOperation"
    )
    proposal = account_budget_proposal_operation.create

    proposal.proposal_type = client.enums.AccountBudgetProposalTypeEnum.CREATE
    proposal.billing_setup = billing_setup_service.billing_setup_path(
        customer_id, billing_setup_id
    )
    proposal.proposed_name = "Account Budget Proposal (example)"

    # Specify the account budget starts immediately
    proposal.proposed_start_time_type = client.enums.TimeTypeEnum.NOW
    # Alternatively you can specify a specific start time. Refer to the
    # AccountBudgetProposal resource documentation for allowed formats.
    #
    # proposal.proposed_start_date_time = '2020-01-02 03:04:05'

    # Specify that the budget runs forever
    proposal.proposed_end_time_type = client.enums.TimeTypeEnum.FOREVER
    # Alternatively you can specify a specific end time. Allowed formats are as
    # above.
    #
    # proposal.proposed_end_date_time = '2021-01-02 03:04:05'

    # Optional: set notes for the budget. These are free text and do not effect
    # budget delivery.
    #
    # proposal.proposed_notes = 'Received prepayment of $0.01'
    proposal.proposed_spending_limit_micros = 10000

    account_budget_proposal_response = (
        account_budget_proposal_service.mutate_account_budget_proposal(
            customer_id=customer_id,
            operation=account_budget_proposal_operation,
        )
    )
    print(
        "Created account budget proposal "
        f'"{account_budget_proposal_response.result.resource_name}".'
    )
      

Ruby

def add_account_budget_proposal(customer_id, billing_setup_id)
  # GoogleAdsClient will read a config file from
  # ENV['HOME']/google_ads_config.rb when called without parameters
  client = Google::Ads::GoogleAds::GoogleAdsClient.new


  operation = client.operation.create_resource.account_budget_proposal do |proposal|
    proposal.billing_setup = client.path.billing_setup(customer_id, billing_setup_id)
    proposal.proposal_type = :CREATE
    proposal.proposed_name = 'Account Budget (example)'

    # Specify the account budget starts immediately
    proposal.proposed_start_time_type = :NOW
    # Alternatively you can specify a specific start time. Refer to the
    # AccountBudgetProposal resource documentation for allowed formats.
    #
    # proposal.proposed_start_date_time = '2020-01-02 03:04:05'

    # Specify that the budget runs forever.
    proposal.proposed_end_time_type = :FOREVER
    # Alternatively you can specify a specific end time. Allowed formats are as
    # above.
    #
    # proposal.proposed_end_date_time = '2021-01-02 03:04:05'

    # Optional: set notes for the budget. These are free text and do not affect
    # budget delivery.
    #
    # proposal.proposed_notes = 'Received prepayment of $0.01'

    # Set the spending limit to 0.01, measured in the Google Ads account currency.
    proposal.proposed_spending_limit_micros = 10_000
  end

  account_budget_proposal_service = client.service.account_budget_proposal
  # Add budget proposal.
  response = account_budget_proposal_service.mutate_account_budget_proposal(
    customer_id: customer_id,
    operation: operation,
  )

  puts sprintf("Created budget proposal %s.",
      response.results.first.resource_name)
end
      

Perl

sub add_account_budget_proposal {
  my ($api_client, $customer_id, $billing_setup_id) = @_;

  # Create an account budget proposal.
  my $account_budget_proposal =
    Google::Ads::GoogleAds::V17::Resources::AccountBudgetProposal->new({
      billingSetup =>
        Google::Ads::GoogleAds::V17::Utils::ResourceNames::billing_setup(
        $customer_id, $billing_setup_id
        ),
      proposalType => CREATE,
      proposedName => "Account Budget (example)",
      # Specify that the account budget starts immediately.
      proposedStartTimeType => NOW,
      # Alternatively you can specify a specific start time. Refer to the
      # AccountBudgetProposal class for allowed formats.
      #
      # proposedStartDateTime => "2020-01-02 03:04:05",

      # Specify that the account budget runs forever.
      proposedEndDateTime => FOREVER,
      # Alternatively you can specify a specific end time. Allowed formats are as below.
      # proposedEndDateTime => "2021-02-03 04:05:06",

      # Optional: set notes for the budget. These are free text and do not effect budget
      # delivery.
      # proposedNotes => "Received prepayment of $0.01",

      # Optional: set PO number for record keeping. This value is at the user's
      # discretion, and has no effect on Google Billing & Payments.
      # proposedPurchaseOrderNumber => "PO number 12345",

      # Set the spending limit to 0.01, measured in the Google Ads account currency.
      proposedSpendingLimitMicros => 10000
    });

  # Create an account budget proposal operation.
  my $account_budget_proposal_operation =
    Google::Ads::GoogleAds::V17::Services::AccountBudgetProposalService::AccountBudgetProposalOperation
    ->new({
      create => $account_budget_proposal
    });

  # Add the account budget proposal.
  my $account_budget_proposal_response =
    $api_client->AccountBudgetProposalService()->mutate({
      customerId => $customer_id,
      operation  => $account_budget_proposal_operation
    });

  printf "Created account budget proposal '%s'.\n",
    $account_budget_proposal_response->{result}{resourceName};

  return 1;
}
      

في طلبات اقتراح ميزانية الحساب، proposed_start_date_time أو proposed_end_date_time تلتزم دائمًا بالمنطقة الزمنية لحساب العميل؛ لا يمكنك تحديد منطقة زمنية. تشير رسالة الأشكال البيانية حدّ الإنفاق المقترَح يُقاس دائمًا بعملة الحساب تحديد ذلك باستخدام كلمة "micro" أو الوحدات إذًا 1.00 دولار = 1000000 ميكرو.

اختياريًا، يمكنك تضمين رقم طلب الشراء الذي سيظهر بجانب على الفاتورة. ليس لذلك أيّ تأثير على تسليم الميزانية.

إزالة اقتراح ميزانية حساب في انتظار المراجعة

يمكنك إزالة اقتراح ميزانية في انتظار المراجعة بالكامل عن طريق إرسال AccountBudgetProposalOperation Remove طلب باسم مورد اقتراح ميزانية الحساب. ومع ذلك، يُرجى ملاحظة أن اقتراحات الميزانية يتم تطبيقها عادةً خلال دقائق.

Java
AccountBudgetProposalOperation operation = AccountBudgetProposalOperation.newBuilder()
  .setRemove(StringValue.of(ResourceNames.accountBudgetProposal(customerId, accountBudgetProposalId)))
  .build();

// Send request to Google Ads API (not shown).
C#
AccountBudgetProposalOperation operation = new AccountBudgetProposalOperation()
{
    Remove = ResourceNames.AccountBudgetProposal(customerId, accountBudgetProposalId)
};

// Send request to Google Ads API (not shown).
بيسو فلبيني
$accountBudgetProposalOperation = new AccountBudgetProposalOperation();
$accountBudgetProposalOperation->setRemove(ResourceNames::forAccountBudgetProposal($customerId, $accountBudgetProposalId));

// Send request to Google Ads API (not shown).
بايثون
account_budget_proposal_service = client.get_service('AccountBudgetProposalService')
account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation')
proposal = account_budget_proposal_operation.remove
proposal.resource_name = account_budget_proposal_service.account_budget_proposal_path(customer_id, account_budget_proposal_id):

# Send request to Google Ads API (not shown).
روبي
operation = client.operation.remove_resource.account_budget_proposal(client.path.account_budget_proposal(customer_id, account_budget_proposal_id))

# Send request to Google Ads API (not shown).
لغة Perl
my $account_budget_proposal_operation =
  Google::Ads::GoogleAds::V17::Services::AccountBudgetProposalService::AccountBudgetProposalOperation
    ->new({
      remove => Google::Ads::GoogleAds::V17::Utils::ResourceNames::billing_setup(
          $customer_id, $account_budget_proposal_id
        )
    });

# Send request to Google Ads API (not shown).

إذا ارتكبت خطأً في الاقتراح الأصلي، يمكنك إعادة إرسال العرض كعملية UPDATE. ارجع إلى قسم إدارة ميزانيات الحساب الحالية أدناه للحصول على مزيد من المعلومات.

جارٍ استرداد ميزانيات الحساب الحالية

يجلب طلب بحث GAQL التالي جميع ميزانيات الحساب الحالية في الحساب:

SELECT
  account_budget.status,
  account_budget.billing_setup,
  account_budget.approved_spending_limit_micros,
  account_budget.approved_spending_limit_type,
  account_budget.proposed_spending_limit_micros,
  account_budget.proposed_spending_limit_type,
  account_budget.adjusted_spending_limit_micros,
  account_budget.adjusted_spending_limit_type,
  account_budget.approved_start_date_time,
  account_budget.proposed_start_date_time,
  account_budget.approved_end_date_time,
  account_budget.approved_end_time_type,
  account_budget.proposed_end_date_time,
  account_budget.proposed_end_time_type
FROM
  account_budget

تجدر الإشارة إلى أنّ الحقول التي تتضمّن وقت بدء ميزانية الحساب ووقت انتهائها يضمّ الحدّ الأقصى للإنفاق خيارات متعددة تتضمّن بادئات، مثل proposed و approved التي تسمح بمقارنة القيم التي تم اقتراحها في البداية باستخدام وتلك التي تمت الموافقة عليها. يحتوي حد الإنفاق على حقول إضافية مع adjusted للإشارة إلى حد الإنفاق الحالي بعد أي تطبيق تطبيق التسويات على المبلغ الموافَق عليه.

يمكن تعديل حد الإنفاق الموافَق عليه لميزانية حساب بمرور الوقت إلى تعكس أرصدة مختلفة لأشياء مثل العرض الزائد للميزانية والنقرات غير الصالحة والنشاط والقسائم الترويجية. مزيد من المعلومات عن ميزانيات الحساب أرصدة الحساب وتسوياته في مركز مساعدة "إعلانات Google"

أي ميزانيات حساب جديدة في انتظار الموافقة، إلى جانب أي حساب حالي الميزانيات التي تحتوي على تحديثات معلّقة، وستحتوي أيضًا على حقل pending_proposal التي يمكن تحديدها. ستحتوي على رقم تعريف المورد من AccountBudgetProposal المرتبط .

أمثلة على الرموز البرمجية

يحتوي المجلد Billing لكل مكتبة برامج على مثال على رمز يعرض طلبًا كاملاً:

إدارة ميزانيات الحساب الحالية

بعد إنشاء ميزانية حساب لأحد العملاء، يمكنك استخدام AccountBudgetProposalService إلى وإدارة معلمات الميزانية. تتمثل عمليات الإدارة الأكثر شيوعًا في عدِّل الحقلين spending_limit وend_date_time. للحصول على قائمة كاملة الحقول القابلة للتغيير، ارجع إلى AccountBudgetProposal جلسة المراجعة.

يتوفّر لك خيار تعديل ميزانية حساب حالية أو إنشاء ميزانية جديدة بالكامل، وكلاهما يظهر هنا.

تعديل ميزانية حساب حالية

يمكنك تعديل حقول ميزانية الحساب الحالية عن طريق إرسال كائنات AccountBudgetProposal مع AccountBudgetProposalType تم الضبط على UPDATE. لاحظ أنه يجب عليك أيضًا الإشارة إلى الحقول التي يتم تحديثها في وسيطة UpdateMask للعملية.

يوضّح المقتطف التالي كيفية تعديل حدّ الإنفاق المقترَح. لميزانية حساب حالية.

Java
AccountBudgetProposal proposal = AccountBudgetProposal.newBuilder()
  .setProposalType(AccountBudgetProposalType.UPDATE)
  .setAccountBudget(accountBudget.getResourceName())
  .setProposedSpendingLimitMicros(
    accountBudget.getProposedSpendingLimitMicros().getValue() + increaseAmount)
  .build();

AccountBudgetProposalOperation operation = AccountBudgetProposalOperation.newBuilder()
  .setCreate(proposal)
  .setUpdateMask(
      FieldMask.newBuilder().addAllPaths(Arrays.asList("proposed_spending_limit")).build())
  .build();

// Send request to Google Ads API (not shown).
C#
AccountBudgetProposal proposal = new AccountBudgetProposal()
{
  ProposalType = AccountBudgetProposalType.Update,
  AccountBudget = accountBudget.ResourceName,
  ProposedSpendingLimitMicros = accountBudget.ProposedSpendingLimitMicros + increaseAmount
};

AccountBudgetProposalOperation operation = new AccountBudgetProposalOperation()
{
  Create = proposal,
  UpdateMask = new FieldMask()
  {
    Paths = { "proposed_spending_limit" }
  }
};

// Send request to Google Ads API (not shown).
بيسو فلبيني
$accountBudgetProposal = new AccountBudgetProposal([
  'proposal_type' => AccountBudgetProposalType::UPDATE,
  'account_budget' => $accountBudget->getResourceName(),
  'proposed_spending_limit_micros' =>
    $accountBudget->getProposedSpendingLimitMicros() + $increaseAmount])

$accountBudgetProposalOperation = new AccountBudgetProposalOperation();
$accountBudgetProposalOperation->setCreate($accountBudgetProposal);
$accountBudgetProposalOperation->setUpdateMask(
  FieldMasks::allSetFieldsOf($accountBudgetProposal)
);

// Send request to Google Ads API (not shown).
بايثون
account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation')

proposal = account_budget_proposal_operation.create
proposal.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').UPDATE
proposal.account_budget = account_budget
proposal.proposed_spending_limit_micros = account_budget.proposed_spending_limit_micros + increase_amount

field_mask = protobuf_helpers.field_mask(None, proposal)
account_budget_proposal_operation.update_mask.CopyFrom(field_mask)

# Send request to Google Ads API (not shown).
روبي
proposal = client.resource.account_budget_proposal
proposal.proposal_type = :UPDATE

mask = client.field_mask.with proposal do
  proposal.account_budget = account_budget.resource_name
  proposal.proposed_spending_limit_micros = account_budget.proposed_spending_limit_micros + increase_amount
end

operation = client.operation.account_budget_proposal do |op|
  op.create = proposal
  op.update_mask = mask
end

# Send request to Google Ads API (not shown).
لغة Perl
my $account_budget_proposal =
  Google::Ads::GoogleAds::V17::Resources::AccountBudgetProposal->new({
    proposalType => UPDATE,
    accountBudget => $account_budget->{resourceName},
    proposedSpendingLimitMicros => $account_budget->{proposedSpendingLimitMicros} + $increaseAmount});

my $account_budget_proposal_operation =
  Google::Ads::GoogleAds::V17::Services::AccountBudgetProposalService::AccountBudgetProposalOperation
    ->new({
      create => $account_budget_proposal,
      updateMask => all_set_fields_of($account_budget_proposal)});

# Send request to Google Ads API (not shown).

تسلسل ميزانية الحساب

وكبديل لتعديل الميزانية الحالية، يتيح لك برنامج "إعلانات Google" إجراء سلسلة ميزانيات حساب متعددة لتشغيلها على التوالي. في المثال التالي، تشير عميل لديه حدود إنفاق مختلفة كل شهر.

يمكن تحقيق ذلك من خلال إنشاء ثلاث كائنات AccountBudgetProposal و إرساله إلى AccountBudgetProposalService

يوضح المقتطف أدناه إنشاء مثل هذه السلسلة باستخدام إعداد الفوترة.

Java
AccountBudgetProposal proposalMay = AccountBudgetProposal.newBuilder()
  .setBillingSetup(ResourceNames.billingSetup(customerId, billingSetupId))
  .setProposalType(AccountBudgetProposalType.CREATE)
  .setProposedName("May budget")
  .setProposedStartDateTime("2018-05-01")
  .setProposedEndDateTime("2018-06-01")
  .setProposedSpendingLimitMicros(1_000_000_000L)
  .build();

AccountBudgetProposal proposalJune = AccountBudgetProposal.newBuilder()
  .setBillingSetup(ResourceNames.billingSetup(customerId, billingSetupId))
  .setProposalType(AccountBudgetProposalType.CREATE)
  .setProposedName("June budget")
  .setProposedStartDateTime("2018-06-01")
  .setProposedEndDateTime("2018-07-01")
  .setProposedSpendingLimitMicros(5_000_000_000L)
  .build();

AccountBudgetProposal proposalJuly = AccountBudgetProposal.newBuilder()
  .setBillingSetup(ResourceNames.billingSetup(customerId, billingSetupId))
  .setProposalType(AccountBudgetProposalType.CREATE)
  .setProposedName("July budget")
  .setProposedStartDateTime("2018-07-01")
  .setProposedEndDateTime("2018-08-01")
  .setProposedSpendingLimitMicros(1_000_000_000L)
  .build();

// Send request to Google Ads API (not shown).
C#
AccountBudgetProposal proposalMay = new AccountBudgetProposal()
{
  BillingSetup = ResourceNames.BillingSetup(customerId, billingSetupId),
  ProposalType = AccountBudgetProposalType.Create,
  ProposedName = "May budget",
  ProposedStartDateTime = "2018-05-01",
  ProposedEndDateTime = "2018-06-01",
  ProposedSpendingLimitMicros = 1_000_000_000
}

AccountBudgetProposal proposalJune = new AccountBudgetProposal()
{
  BillingSetup = ResourceNames.BillingSetup(customerId, billingSetupId),
  ProposalType = AccountBudgetProposalType.Create,
  ProposedName = "June budget",
  ProposedStartDateTime = "2018-06-01",
  ProposedEndDateTime = "2018-07-01",
  ProposedSpendingLimitMicros = 5_000_000_000
}

AccountBudgetProposal proposalJuly = new AccountBudgetProposal()
{
  BillingSetup = ResourceNames.BillingSetup(customerId, billingSetupId),
  ProposalType = AccountBudgetProposalType.Create,
  ProposedName = "July budget",
  ProposedStartDateTime = "2018-07-01",
  ProposedEndDateTime = "2018-08-01",
  ProposedSpendingLimitMicros = 1_000_000_000
}

// Send request to Google Ads API (not shown).
بيسو فلبيني
$proposalMay = new AccountBudgetProposal([
  'billing_setup' => ResourceNames::forBillingSetup($customerId, $billingSetupId),
  'proposal_type' => AccountBudgetProposalType::CREATE,
  'proposed_name' => 'May budget',
  'proposed_start_date_time' => '2018-05-01',
  'proposed_end_date_time' => '2018-06-01',
  'proposed_spending_limit_micros' => 1000000000
]);

$proposalJune = new AccountBudgetProposal([
  'billing_setup' => ResourceNames::forBillingSetup($customerId, $billingSetupId),
  'proposal_type' => AccountBudgetProposalType::CREATE,
  'proposed_name' => 'June budget',
  'proposed_start_date_time' => '2018-06-01',
  'proposed_end_date_time' => '2018-07-01',
  'proposed_spending_limit_micros' => 5000000000
]);

$proposalJuly = new AccountBudgetProposal([
  'billing_setup' => ResourceNames::forBillingSetup($customerId, $billingSetupId),
  'proposal_type' => AccountBudgetProposalType::CREATE,
  'proposed_name' => 'July budget',
  'proposed_start_date_time' => '2018-07-01',
  'proposed_end_date_time' => '2018-08-01',
  'proposed_spending_limit_micros' => 1000000000
]);

// Send request to Google Ads API (not shown).
بايثون
may_account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation')
proposalMay = may_account_budget_proposal_operation.create
proposalMay.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').CREATE
proposalMay.billing_setup = billing_setup_service.billing_setup_path(customer_id, billing_setup_id)
proposalMay.proposed_name = 'May budget'
proposalMay.proposed_start_date_time = '2018-05-01'
proposalMay.proposed_end_date_time = '2018-06-01'
proposalMay.proposed_spending_limit_micros = 1000000000

june_account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation')
proposalJune = may_account_budget_proposal_operation.create
proposalJune.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').CREATE
proposalJune.billing_setup = billing_setup_service.billing_setup_path(customer_id, billing_setup_id)
proposalJune.proposed_name = 'June budget'
proposalJune.proposed_start_date_time = '2018-06-01'
proposalJune.proposed_end_date_time = '2018-07-01'
proposalJune.proposed_spending_limit_micros = 5000000000

july_account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation')
proposalJuly = may_account_budget_proposal_operation.create
proposalJuly.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').CREATE
proposalJuly.billing_setup = billing_setup_service.billing_setup_path(customer_id, billing_setup_id)
proposalJuly.proposed_name = 'July budget'
proposalJuly.proposed_start_date_time = '2018-07-01'
proposalJuly.proposed_end_date_time = '2018-08-01'
proposalJuly.proposed_spending_limit_micros = 1000000000

# Send request to Google Ads API (not shown).
روبي
proposal_may = client.operation.create_resource.account_budget_proposal do |proposal|
  proposal.billing_setup = client.path.billing_setup(customer_id, billing_setup_id)
  proposal.proposal_type = :CREATE
  proposal.proposed_name = 'May budget'
  proposal.proposed_start_date_time = '2018-05-01'
  proposal.proposed_end_date_time = '2018-06-01'
  proposal.proposed_spending_limit_micros = 1_000_000_000
end

proposal_june = client.operation.create_resource.account_budget_proposal do |proposal|
  proposal.billing_setup = client.path.billing_setup(customer_id, billing_setup_id)
  proposal.proposal_type = :CREATE
  proposal.proposed_name = 'June budget'
  proposal.proposed_start_date_time = '2018-06-01'
  proposal.proposed_end_date_time = '2018-07-01'
  proposal.proposed_spending_limit_micros = 5_000_000_000
end

proposal_july = client.operation.create_resource.account_budget_proposal do |proposal|
  proposal.billing_setup = client.path.billing_setup(customer_id, billing_setup_id)
  proposal.proposal_type = :CREATE
  proposal.proposed_name = 'July budget'
  proposal.proposed_start_date_time = '2018-07-01'
  proposal.proposed_end_date_time = '2018-08-01'
  proposal.proposed_spending_limit_micros = 1_000_000_000
end

# Send request to Google Ads API (not shown).
لغة Perl
my $may_proposal =
  Google::Ads::GoogleAds::V17::Resources::AccountBudgetProposal->new({
    billingSetup =>
      Google::Ads::GoogleAds::V17::Utils::ResourceNames::billing_setup(
      $customer_id, $billing_setup_id
      ),
    proposalType => CREATE,
    proposedName => "May budget",
    proposedStartDateTime => "2018-05-01",
    proposedEndDateTime => "2018-06-01",
    proposedSpendingLimitMicros => 1000000000
  });

my $june_proposal =
  Google::Ads::GoogleAds::V17::Resources::AccountBudgetProposal->new({
    billingSetup =>
      Google::Ads::GoogleAds::V17::Utils::ResourceNames::billing_setup(
      $customer_id, $billing_setup_id
      ),
    proposalType => CREATE,
    proposedName => "June budget",
    proposedStartDateTime => "2018-06-01",
    proposedEndDateTime => "2018-07-01",
    proposedSpendingLimitMicros => 5000000000
  });

my $july_proposal =
  Google::Ads::GoogleAds::V17::Resources::AccountBudgetProposal->new({
    billingSetup =>
      Google::Ads::GoogleAds::V17::Utils::ResourceNames::billing_setup(
      $customer_id, $billing_setup_id
      ),
    proposalType => CREATE,
    proposedName => "July budget",
    proposedStartDateTime => "2018-07-01",
    proposedEndDateTime => "2018-08-01",
    proposedSpendingLimitMicros => 1000000000
  });

# Send request to Google Ads API (not shown).

لاحظ استخدام AccountBudgetProposalType.CREATE على كل اقتراح. سيؤدي هذا إلى إنشاء ثلاث ميزانيات مختلفة، بدلاً من تحديث نفس الميزانية ثلاث مرات.

جارٍ إنهاء ميزانيات الحساب

يمكن إنهاء ميزانيات الحساب عندما تكون نشطة، وإزالتها تمامًا قبل تبدأ أو تكون في انتظار الموافقة.

إنهاء ميزانية الحساب النشطة

لا يمكن إزالة ميزانية الحساب النشطة. ومع ذلك، يمكنك تحديد وقت الانتهاء إلى الوقت الحالي. وأبسط طريقة لتحقيق ذلك هي إرسال اقتراح AccountBudgetProposalType.END

يوضِّح المقتطف التالي كيفية إنهاء ميزانية حساب حالية.

Java
AccountBudgetProposal.newBuilder()
  .setProposalType(AccountBudgetProposalType.END)
  .setAccountBudget(accountBudget.getResourceName())
  .build();

// Send request to Google Ads API (not shown).
C#
AccountBudgetProposal proposal = new AccountBudgetProposal()
{
  ProposalType = AccountBudgetProposalType.End,
  AccountBudget = accountBudget.ResourceName
};

// Send request to Google Ads API (not shown).
بيسو فلبيني
$accountBudgetProposal = new AccountBudgetProposal([
  'proposal_type' => AccountBudgetProposalType::END,
  'account_budget' => $accountBudget->getResourceName()
])

// Send request to Google Ads API (not shown).
بايثون
account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation')
proposal = account_budget_proposal_operation.create
proposal.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').END
proposal.account_budget = account_budget

# Send request to Google Ads API (not shown).
روبي
proposal = client.resource.account_budget_proposal
proposal.proposal_type = :END
proposal.account_budget = account_budget.resource_name

# Send request to Google Ads API (not shown).
لغة Perl
my $account_budget_proposal =
  Google::Ads::GoogleAds::V17::Resources::AccountBudgetProposal->new({
    proposalType => END,
    accountBudget => $account_budget->{resourceName});

# Send request to Google Ads API (not shown).

يعادل ذلك إعداد تحديث ميزانية الحساب من خلال تحديد تاريخ الانتهاء تاريخ ووقت إلى TimeType.NOW.

إزالة ميزانية حساب موافَق عليها قبل وقت بدئها

إذا اقترحت ميزانية حساب للبدء في المستقبل، يمكنك إزالتها قبل وقت البدء تمامًا من خلال إرسال AccountBudgetProposalType.REMOVE ونوع الاقتراح.

يوضح المقتطف التالي إزالة حساب حالي حالي. ميزانيتك.

Java
AccountBudgetProposal.newBuilder()
  .setProposalType(AccountBudgetProposalType.REMOVE)
  .setAccountBudget(accountBudget.getResourceName())
  .build();

// Send request to Google Ads API (not shown).
C#
AccountBudgetProposal proposal = new AccountBudgetProposal()
{
  ProposalType = AccountBudgetProposalType.Remove,
  AccountBudget = accountBudget.ResourceName
};

// Send request to Google Ads API (not shown).
بيسو فلبيني
$accountBudgetProposal = new AccountBudgetProposal([
  'proposal_type' => AccountBudgetProposalType::REMOVE,
  'account_budget' => $accountBudget->getResourceName()
])

// Send request to Google Ads API (not shown).
بايثون
account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation')
proposal = account_budget_proposal_operation.create
proposal.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').REMOVE
proposal.account_budget = account_budget

# Send request to Google Ads API (not shown).
روبي
proposal = client.resource.account_budget_proposal
proposal.proposal_type = :REMOVE
proposal.account_budget = account_budget.resource_name

# Send request to Google Ads API (not shown).
لغة Perl
my $account_budget_proposal =
  Google::Ads::GoogleAds::V17::Resources::AccountBudgetProposal->new({
    proposalType => REMOVE,
    accountBudget => $account_budget->{resourceName});

# Send request to Google Ads API (not shown).