Les budgets de compte contrôlent les dépenses d'un compte sur une période donnée en définissant des propriétés de budget telles que la limite de dépenses, l'heure de début et l'heure de fin. Ils doivent pointer vers l'une des configurations de facturation du compte pour indiquer le compte Payments spécifique qui sera facturé. Vous pouvez créer, mettre à jour et supprimer des AccountBudget
en envoyant des objets AccountBudgetProposal
.
Les objets AccountBudget
représentent le résultat final de l'application des propositions. Une fois une proposition approuvée, ses modifications (sous réserve d'ajustements) entraîneront la création d'un budget de compte ou la mise à jour d'un budget existant. Cela dépend du proposal_type
spécifié dans la requête.
AccountBudgetProposalType |
Description |
---|---|
CREATE |
Crée un budget de compte, qui doit être approuvé avant d'être utilisé. |
UPDATE |
Modifie le budget d'un compte existant. |
END |
Définit l'heure de fin d'un budget de compte sur l'heure actuelle. |
REMOVE |
Supprime un budget de compte avant son heure de début. |
Les sections ci-dessous décrivent le comportement de chaque type de proposition.
Créer une proposition de budget de compte
Créer un budget de compte vous permet de contrôler le comportement de dépenses d'un client. Utilisez AccountBudgetProposalService
pour créer un AccountBudgetProposal
. Vous devez définir proposal_type
sur CREATE
pour spécifier qu'un nouveau budget doit être créé. Pour en savoir plus sur les autres opérations, consultez la section Gestion de ce guide.
N'oubliez pas d'utiliser une configuration de facturation avec un compte de paiement auquel vous avez accès en écriture. Pour en savoir plus, consultez le guide de configuration de la facturation.
L'exemple suivant montre comment créer une proposition de budget.
Java
private void runExample(GoogleAdsClient googleAdsClient, long customerId, long billingSetupId) { // Creates an AccountBudgetProposal. This will be reviewed offline by Google Ads, and if // approved will become an AccountBudget. AccountBudgetProposal proposal = AccountBudgetProposal.newBuilder() .setBillingSetup(ResourceNames.billingSetup(customerId, billingSetupId)) .setProposalType(AccountBudgetProposalType.CREATE) .setProposedName("Account Budget (example)") // Specifies the account budget starts immediately. .setProposedStartTimeType(TimeType.NOW) // Alternatively you can specify a specific start time. Refer to the // AccountBudgetProposal // resource documentation for allowed formats. // // .setProposedStartDateTime("2020-01-02 03:04:05") // Specifies that the budget runs forever. .setProposedEndTimeType(TimeType.FOREVER) // Alternatively you can specify a specific end time. Allowed formats are as above. // .setProposedEndDateTime("2021-02-03 04:05:06") // Optional: sets notes for the budget. These are free text and do not effect budget // delivery. // .setProposedNotes("Received prepayment of $0.01") // Sets the spending limit to 0.01, measured in the Google Ads account currency. .setProposedSpendingLimitMicros(10_000) // Optional: sets PO number for record keeping. This value is at the user's // discretion, and has no effect on Google Billing & Payments. // .setProposedPurchaseOrderNumber("PO number 12345") .build(); // Creates an operation which will add the new AccountBudgetProposal. AccountBudgetProposalOperation operation = AccountBudgetProposalOperation.newBuilder().setCreate(proposal).build(); try (AccountBudgetProposalServiceClient accountBudgetProposalServiceClient = googleAdsClient.getLatestVersion().createAccountBudgetProposalServiceClient()) { // Sends the request to the Account Budget Proposal Service. MutateAccountBudgetProposalResponse response = accountBudgetProposalServiceClient.mutateAccountBudgetProposal( String.valueOf(customerId), operation); System.out.printf( "Account budget proposal created: %s.%n", response.getResult().getResourceName()); } }
C#
public void Run(GoogleAdsClient client, long customerId, long billingSetupId) { // Get the AccountBudgetProposalServiceClient. AccountBudgetProposalServiceClient proposalService = client.GetService(Services.V18.AccountBudgetProposalService); // Create an AccountBudgetProposal. The proposal will be reviewed offline by Google Ads, // and if approved will become an AccountBudget. AccountBudgetProposal proposal = new AccountBudgetProposal() { BillingSetup = ResourceNames.BillingSetup(customerId, billingSetupId), ProposalType = AccountBudgetProposalType.Create, ProposedName = "Account Budget (example)", // Specify the account budget starts immediately ProposedStartTimeType = TimeType.Now, // Alternatively, you can specify a specific start time. Refer to the // AccountBudgetProposal resource documentation for allowed formats. // //ProposedStartDateTime = "2020-01-02 03:04:05", // Specify that the budget runs forever. ProposedEndTimeType = TimeType.Forever, // Alternatively you can specify a specific end time. Allowed formats are as above. //ProposedEndDateTime = "2021-02-03 04:05:06", // Optional: set notes for the budget. These are free text and do not effect budget // delivery. //ProposedNotes = "Received prepayment of $0.01", // Set the spending limit to 0.01, measured in the Google Ads account currency. ProposedSpendingLimitMicros = 10_000 // Optional: set PO number for record keeping. This value is at the user's // discretion, and has no effect on Google Billing & Payments. //ProposedPurchaseOrderNumber = "PO number 12345" }; // Create an operation which will add the new AccountBudgetProposal AccountBudgetProposalOperation operation = new AccountBudgetProposalOperation() { Create = proposal }; try { // Send the request to the Account Budget Proposal Service. MutateAccountBudgetProposalResponse response = proposalService. MutateAccountBudgetProposal(customerId.ToString(), operation); // Display the results. Console.WriteLine($"Account budget proposal '{response.Result.ResourceName}' " + "was created."); } catch (GoogleAdsException e) { Console.WriteLine("Failure:"); Console.WriteLine($"Message: {e.Message}"); Console.WriteLine($"Failure: {e.Failure}"); Console.WriteLine($"Request ID: {e.RequestId}"); throw; } }
PHP
public static function runExample( GoogleAdsClient $googleAdsClient, int $customerId, int $billingSetupId ) { // Constructs an account budget proposal. $accountBudgetProposal = new AccountBudgetProposal([ 'billing_setup' => ResourceNames::forBillingSetup($customerId, $billingSetupId), 'proposal_type' => AccountBudgetProposalType::CREATE, 'proposed_name' => 'Account Budget (example)', // Specifies the account budget starts immediately. 'proposed_start_time_type' => TimeType::NOW, // Alternatively you can specify a specific start time. Refer to the // AccountBudgetProposal class for allowed formats. // // 'proposed_start_date_time' => '2020-01-02 03:04:05', // Specify that the budget runs forever. 'proposed_end_time_type' => TimeType::FOREVER, // Alternatively you can specify a specific end time. Allowed formats are as above. // 'proposed_end_date_time' => '2021-02-03 04:05:06', // Optional: set notes for the budget. These are free text and do not effect budget // delivery. // 'proposed_notes' => 'Received prepayment of $0.01', // Optional: set PO number for record keeping. This value is at the user's // discretion, and has no effect on Google Billing & Payments. // 'proposed_purchase_order_number' => 'PO number 12345', // Set the spending limit to 0.01, measured in the Google Ads account currency. 'proposed_spending_limit_micros' => 10000 ]); $accountBudgetProposalOperation = new AccountBudgetProposalOperation(); $accountBudgetProposalOperation->setCreate($accountBudgetProposal); // Issues a mutate request to add the account budget proposal. $accountBudgetProposalServiceClient = $googleAdsClient->getAccountBudgetProposalServiceClient(); $response = $accountBudgetProposalServiceClient->mutateAccountBudgetProposal( MutateAccountBudgetProposalRequest::build($customerId, $accountBudgetProposalOperation) ); printf( "Added an account budget proposal with resource name '%s'.%s", $response->getResult()->getResourceName(), PHP_EOL ); }
Python
def main(client, customer_id, billing_setup_id): account_budget_proposal_service = client.get_service( "AccountBudgetProposalService" ) billing_setup_service = client.get_service("BillingSetupService") account_budget_proposal_operation = client.get_type( "AccountBudgetProposalOperation" ) proposal = account_budget_proposal_operation.create proposal.proposal_type = client.enums.AccountBudgetProposalTypeEnum.CREATE proposal.billing_setup = billing_setup_service.billing_setup_path( customer_id, billing_setup_id ) proposal.proposed_name = "Account Budget Proposal (example)" # Specify the account budget starts immediately proposal.proposed_start_time_type = client.enums.TimeTypeEnum.NOW # Alternatively you can specify a specific start time. Refer to the # AccountBudgetProposal resource documentation for allowed formats. # # proposal.proposed_start_date_time = '2020-01-02 03:04:05' # Specify that the budget runs forever proposal.proposed_end_time_type = client.enums.TimeTypeEnum.FOREVER # Alternatively you can specify a specific end time. Allowed formats are as # above. # # proposal.proposed_end_date_time = '2021-01-02 03:04:05' # Optional: set notes for the budget. These are free text and do not effect # budget delivery. # # proposal.proposed_notes = 'Received prepayment of $0.01' proposal.proposed_spending_limit_micros = 10000 account_budget_proposal_response = ( account_budget_proposal_service.mutate_account_budget_proposal( customer_id=customer_id, operation=account_budget_proposal_operation, ) ) print( "Created account budget proposal " f'"{account_budget_proposal_response.result.resource_name}".' )
Ruby
def add_account_budget_proposal(customer_id, billing_setup_id) # GoogleAdsClient will read a config file from # ENV['HOME']/google_ads_config.rb when called without parameters client = Google::Ads::GoogleAds::GoogleAdsClient.new operation = client.operation.create_resource.account_budget_proposal do |proposal| proposal.billing_setup = client.path.billing_setup(customer_id, billing_setup_id) proposal.proposal_type = :CREATE proposal.proposed_name = 'Account Budget (example)' # Specify the account budget starts immediately proposal.proposed_start_time_type = :NOW # Alternatively you can specify a specific start time. Refer to the # AccountBudgetProposal resource documentation for allowed formats. # # proposal.proposed_start_date_time = '2020-01-02 03:04:05' # Specify that the budget runs forever. proposal.proposed_end_time_type = :FOREVER # Alternatively you can specify a specific end time. Allowed formats are as # above. # # proposal.proposed_end_date_time = '2021-01-02 03:04:05' # Optional: set notes for the budget. These are free text and do not affect # budget delivery. # # proposal.proposed_notes = 'Received prepayment of $0.01' # Set the spending limit to 0.01, measured in the Google Ads account currency. proposal.proposed_spending_limit_micros = 10_000 end account_budget_proposal_service = client.service.account_budget_proposal # Add budget proposal. response = account_budget_proposal_service.mutate_account_budget_proposal( customer_id: customer_id, operation: operation, ) puts sprintf("Created budget proposal %s.", response.results.first.resource_name) end
Perl
sub add_account_budget_proposal { my ($api_client, $customer_id, $billing_setup_id) = @_; # Create an account budget proposal. my $account_budget_proposal = Google::Ads::GoogleAds::V18::Resources::AccountBudgetProposal->new({ billingSetup => Google::Ads::GoogleAds::V18::Utils::ResourceNames::billing_setup( $customer_id, $billing_setup_id ), proposalType => CREATE, proposedName => "Account Budget (example)", # Specify that the account budget starts immediately. proposedStartTimeType => NOW, # Alternatively you can specify a specific start time. Refer to the # AccountBudgetProposal class for allowed formats. # # proposedStartDateTime => "2020-01-02 03:04:05", # Specify that the account budget runs forever. proposedEndDateTime => FOREVER, # Alternatively you can specify a specific end time. Allowed formats are as below. # proposedEndDateTime => "2021-02-03 04:05:06", # Optional: set notes for the budget. These are free text and do not effect budget # delivery. # proposedNotes => "Received prepayment of $0.01", # Optional: set PO number for record keeping. This value is at the user's # discretion, and has no effect on Google Billing & Payments. # proposedPurchaseOrderNumber => "PO number 12345", # Set the spending limit to 0.01, measured in the Google Ads account currency. proposedSpendingLimitMicros => 10000 }); # Create an account budget proposal operation. my $account_budget_proposal_operation = Google::Ads::GoogleAds::V18::Services::AccountBudgetProposalService::AccountBudgetProposalOperation ->new({ create => $account_budget_proposal }); # Add the account budget proposal. my $account_budget_proposal_response = $api_client->AccountBudgetProposalService()->mutate({ customerId => $customer_id, operation => $account_budget_proposal_operation }); printf "Created account budget proposal '%s'.\n", $account_budget_proposal_response->{result}{resourceName}; return 1; }
Dans les demandes de proposition de budget de compte, proposed_start_date_time
et proposed_end_date_time
sont toujours dans le fuseau horaire du compte du client. Vous ne pouvez pas spécifier de fuseau horaire.
La limite de dépenses proposée est toujours mesurée dans la devise du compte.Indiquez-la en utilisant des unités "micro", soit 1 $= 1 000 000 micros.
Vous pouvez éventuellement inclure un numéro de bon de commande qui s'affichera à côté de ces frais sur la facture. Cela n'a aucune incidence sur la distribution du budget.
Supprimer une proposition de budget du compte en attente
Vous pouvez supprimer une proposition de budget en attente complète en envoyant une requête AccountBudgetProposalOperation Remove
avec un nom de ressource de proposition de budget de compte. Toutefois, notez que les propositions de budget sont généralement appliquées en quelques minutes.
AccountBudgetProposalOperation operation = AccountBudgetProposalOperation.newBuilder() .setRemove(StringValue.of(ResourceNames.accountBudgetProposal(customerId, accountBudgetProposalId))) .build(); // Send request to Google Ads API (not shown).
AccountBudgetProposalOperation operation = new AccountBudgetProposalOperation() { Remove = ResourceNames.AccountBudgetProposal(customerId, accountBudgetProposalId) }; // Send request to Google Ads API (not shown).
$accountBudgetProposalOperation = new AccountBudgetProposalOperation(); $accountBudgetProposalOperation->setRemove(ResourceNames::forAccountBudgetProposal($customerId, $accountBudgetProposalId)); // Send request to Google Ads API (not shown).
account_budget_proposal_service = client.get_service('AccountBudgetProposalService') account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation') proposal = account_budget_proposal_operation.remove proposal.resource_name = account_budget_proposal_service.account_budget_proposal_path(customer_id, account_budget_proposal_id): # Send request to Google Ads API (not shown).
operation = client.operation.remove_resource.account_budget_proposal(client.path.account_budget_proposal(customer_id, account_budget_proposal_id))
# Send request to Google Ads API (not shown).
my $account_budget_proposal_operation = Google::Ads::GoogleAds::V18::Services::AccountBudgetProposalService::AccountBudgetProposalOperation ->new({ remove => Google::Ads::GoogleAds::V18::Utils::ResourceNames::billing_setup( $customer_id, $account_budget_proposal_id ) }); # Send request to Google Ads API (not shown).
Si vous avez fait une erreur dans la proposition d'origine, vous pouvez la renvoyer en tant qu'opération UPDATE
. Consultez Mettre à jour le budget d'un compte existant.
Récupérer les budgets de comptes existants
La requête GAQL suivante récupère tous les budgets de compte existants dans un compte:
SELECT
account_budget.status,
account_budget.billing_setup,
account_budget.approved_spending_limit_micros,
account_budget.approved_spending_limit_type,
account_budget.proposed_spending_limit_micros,
account_budget.proposed_spending_limit_type,
account_budget.adjusted_spending_limit_micros,
account_budget.adjusted_spending_limit_type,
account_budget.approved_start_date_time,
account_budget.proposed_start_date_time,
account_budget.approved_end_date_time,
account_budget.approved_end_time_type,
account_budget.proposed_end_date_time,
account_budget.proposed_end_time_type
FROM
account_budget
Notez que les champs encapsulant l'heure de début, l'heure de fin et la limite de dépenses du budget du compte comportent plusieurs variantes avec des préfixes tels que proposed
et approved
, qui permettent de comparer les valeurs initialement proposées à celles approuvées. La limite de dépenses comporte des champs supplémentaires avec le préfixe adjusted
pour indiquer la limite de dépenses actuelle en vigueur après tout ajustement appliqué au montant approuvé.
La limite de dépense approuvée du budget d'un compte peut être ajustée au fil du temps pour refléter divers crédits liés, par exemple, à des impressions excessives, à une activité de clics incorrecte et à des bons promotionnels. Pour en savoir plus sur les budgets de compte et les crédits et ajustements de compte, consultez le centre d'aide Google Ads.
Tous les nouveaux budgets de compte en attente d'approbation, ainsi que les budgets de compte existants dont les mises à jour sont en attente, contiennent également un champ pending_proposal
pouvant être sélectionné. Il contient l'ID de ressource de l'objet AccountBudgetProposal
associé.
Gérer les budgets existants du compte
Une fois que vous avez créé un budget de compte pour un client, vous pouvez utiliser AccountBudgetProposalService
pour gérer les paramètres du budget. Les opérations de gestion les plus courantes consistent à mettre à jour les champs spending_limit
et end_date_time
. Pour obtenir la liste complète des champs modifiables, consultez la documentation AccountBudgetProposal
.
Vous pouvez mettre à jour le budget d'un compte existant ou en créer un entièrement. Les deux options sont affichées ici.
Modifier le budget d'un compte existant
Vous pouvez mettre à jour les champs de budget du compte existant en envoyant des objets AccountBudgetProposal
avec AccountBudgetProposalType
défini sur UPDATE
. Notez que vous devez également indiquer les champs mis à jour dans l'argument UpdateMask
de l'opération.
L'extrait de code suivant montre comment mettre à jour la limite de dépenses proposée pour le budget d'un compte existant.
AccountBudgetProposal proposal = AccountBudgetProposal.newBuilder() .setProposalType(AccountBudgetProposalType.UPDATE) .setAccountBudget(accountBudget.getResourceName()) .setProposedSpendingLimitMicros( accountBudget.getProposedSpendingLimitMicros().getValue() + increaseAmount) .build(); AccountBudgetProposalOperation operation = AccountBudgetProposalOperation.newBuilder() .setCreate(proposal) .setUpdateMask( FieldMask.newBuilder().addAllPaths(Arrays.asList("proposed_spending_limit")).build()) .build(); // Send request to Google Ads API (not shown).
AccountBudgetProposal proposal = new AccountBudgetProposal() { ProposalType = AccountBudgetProposalType.Update, AccountBudget = accountBudget.ResourceName, ProposedSpendingLimitMicros = accountBudget.ProposedSpendingLimitMicros + increaseAmount }; AccountBudgetProposalOperation operation = new AccountBudgetProposalOperation() { Create = proposal, UpdateMask = new FieldMask() { Paths = { "proposed_spending_limit" } } }; // Send request to Google Ads API (not shown).
$accountBudgetProposal = new AccountBudgetProposal([ 'proposal_type' => AccountBudgetProposalType::UPDATE, 'account_budget' => $accountBudget->getResourceName(), 'proposed_spending_limit_micros' => $accountBudget->getProposedSpendingLimitMicros() + $increaseAmount]) $accountBudgetProposalOperation = new AccountBudgetProposalOperation(); $accountBudgetProposalOperation->setCreate($accountBudgetProposal); $accountBudgetProposalOperation->setUpdateMask( FieldMasks::allSetFieldsOf($accountBudgetProposal) ); // Send request to Google Ads API (not shown).
account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation') proposal = account_budget_proposal_operation.create proposal.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').UPDATE proposal.account_budget = account_budget proposal.proposed_spending_limit_micros = account_budget.proposed_spending_limit_micros + increase_amount field_mask = protobuf_helpers.field_mask(None, proposal) account_budget_proposal_operation.update_mask.CopyFrom(field_mask) # Send request to Google Ads API (not shown).
proposal = client.resource.account_budget_proposal proposal.proposal_type = :UPDATE mask = client.field_mask.with proposal do proposal.account_budget = account_budget.resource_name proposal.proposed_spending_limit_micros = account_budget.proposed_spending_limit_micros + increase_amount end operation = client.operation.account_budget_proposal do |op| op.create = proposal op.update_mask = mask end # Send request to Google Ads API (not shown).
my $account_budget_proposal = Google::Ads::GoogleAds::V18::Resources::AccountBudgetProposal->new({ proposalType => UPDATE, accountBudget => $account_budget->{resourceName}, proposedSpendingLimitMicros => $account_budget->{proposedSpendingLimitMicros} + $increaseAmount}); my $account_budget_proposal_operation = Google::Ads::GoogleAds::V18::Services::AccountBudgetProposalService::AccountBudgetProposalOperation ->new({ create => $account_budget_proposal, updateMask => all_set_fields_of($account_budget_proposal)}); # Send request to Google Ads API (not shown).
Chaîne de budgets de compte
Au lieu de modifier le budget existant, Google Ads vous permet de lier plusieurs budgets de compte pour les diffuser successivement. Dans l'exemple suivant, un client a des limites de dépenses différentes chaque mois.
Pour ce faire, créez trois objets AccountBudgetProposal
et envoyez-les à AccountBudgetProposalService
.
L'extrait de code ci-dessous montre comment créer une telle chaîne à l'aide d'une configuration de facturation existante.
AccountBudgetProposal proposalMay = AccountBudgetProposal.newBuilder() .setBillingSetup(ResourceNames.billingSetup(customerId, billingSetupId)) .setProposalType(AccountBudgetProposalType.CREATE) .setProposedName("May budget") .setProposedStartDateTime("2018-05-01") .setProposedEndDateTime("2018-06-01") .setProposedSpendingLimitMicros(1_000_000_000L) .build(); AccountBudgetProposal proposalJune = AccountBudgetProposal.newBuilder() .setBillingSetup(ResourceNames.billingSetup(customerId, billingSetupId)) .setProposalType(AccountBudgetProposalType.CREATE) .setProposedName("June budget") .setProposedStartDateTime("2018-06-01") .setProposedEndDateTime("2018-07-01") .setProposedSpendingLimitMicros(5_000_000_000L) .build(); AccountBudgetProposal proposalJuly = AccountBudgetProposal.newBuilder() .setBillingSetup(ResourceNames.billingSetup(customerId, billingSetupId)) .setProposalType(AccountBudgetProposalType.CREATE) .setProposedName("July budget") .setProposedStartDateTime("2018-07-01") .setProposedEndDateTime("2018-08-01") .setProposedSpendingLimitMicros(1_000_000_000L) .build(); // Send request to Google Ads API (not shown).
AccountBudgetProposal proposalMay = new AccountBudgetProposal() { BillingSetup = ResourceNames.BillingSetup(customerId, billingSetupId), ProposalType = AccountBudgetProposalType.Create, ProposedName = "May budget", ProposedStartDateTime = "2018-05-01", ProposedEndDateTime = "2018-06-01", ProposedSpendingLimitMicros = 1_000_000_000 } AccountBudgetProposal proposalJune = new AccountBudgetProposal() { BillingSetup = ResourceNames.BillingSetup(customerId, billingSetupId), ProposalType = AccountBudgetProposalType.Create, ProposedName = "June budget", ProposedStartDateTime = "2018-06-01", ProposedEndDateTime = "2018-07-01", ProposedSpendingLimitMicros = 5_000_000_000 } AccountBudgetProposal proposalJuly = new AccountBudgetProposal() { BillingSetup = ResourceNames.BillingSetup(customerId, billingSetupId), ProposalType = AccountBudgetProposalType.Create, ProposedName = "July budget", ProposedStartDateTime = "2018-07-01", ProposedEndDateTime = "2018-08-01", ProposedSpendingLimitMicros = 1_000_000_000 } // Send request to Google Ads API (not shown).
$proposalMay = new AccountBudgetProposal([ 'billing_setup' => ResourceNames::forBillingSetup($customerId, $billingSetupId), 'proposal_type' => AccountBudgetProposalType::CREATE, 'proposed_name' => 'May budget', 'proposed_start_date_time' => '2018-05-01', 'proposed_end_date_time' => '2018-06-01', 'proposed_spending_limit_micros' => 1000000000 ]); $proposalJune = new AccountBudgetProposal([ 'billing_setup' => ResourceNames::forBillingSetup($customerId, $billingSetupId), 'proposal_type' => AccountBudgetProposalType::CREATE, 'proposed_name' => 'June budget', 'proposed_start_date_time' => '2018-06-01', 'proposed_end_date_time' => '2018-07-01', 'proposed_spending_limit_micros' => 5000000000 ]); $proposalJuly = new AccountBudgetProposal([ 'billing_setup' => ResourceNames::forBillingSetup($customerId, $billingSetupId), 'proposal_type' => AccountBudgetProposalType::CREATE, 'proposed_name' => 'July budget', 'proposed_start_date_time' => '2018-07-01', 'proposed_end_date_time' => '2018-08-01', 'proposed_spending_limit_micros' => 1000000000 ]); // Send request to Google Ads API (not shown).
may_account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation') proposalMay = may_account_budget_proposal_operation.create proposalMay.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').CREATE proposalMay.billing_setup = billing_setup_service.billing_setup_path(customer_id, billing_setup_id) proposalMay.proposed_name = 'May budget' proposalMay.proposed_start_date_time = '2018-05-01' proposalMay.proposed_end_date_time = '2018-06-01' proposalMay.proposed_spending_limit_micros = 1000000000 june_account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation') proposalJune = may_account_budget_proposal_operation.create proposalJune.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').CREATE proposalJune.billing_setup = billing_setup_service.billing_setup_path(customer_id, billing_setup_id) proposalJune.proposed_name = 'June budget' proposalJune.proposed_start_date_time = '2018-06-01' proposalJune.proposed_end_date_time = '2018-07-01' proposalJune.proposed_spending_limit_micros = 5000000000 july_account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation') proposalJuly = may_account_budget_proposal_operation.create proposalJuly.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').CREATE proposalJuly.billing_setup = billing_setup_service.billing_setup_path(customer_id, billing_setup_id) proposalJuly.proposed_name = 'July budget' proposalJuly.proposed_start_date_time = '2018-07-01' proposalJuly.proposed_end_date_time = '2018-08-01' proposalJuly.proposed_spending_limit_micros = 1000000000 # Send request to Google Ads API (not shown).
proposal_may = client.operation.create_resource.account_budget_proposal do |proposal| proposal.billing_setup = client.path.billing_setup(customer_id, billing_setup_id) proposal.proposal_type = :CREATE proposal.proposed_name = 'May budget' proposal.proposed_start_date_time = '2018-05-01' proposal.proposed_end_date_time = '2018-06-01' proposal.proposed_spending_limit_micros = 1_000_000_000 end proposal_june = client.operation.create_resource.account_budget_proposal do |proposal| proposal.billing_setup = client.path.billing_setup(customer_id, billing_setup_id) proposal.proposal_type = :CREATE proposal.proposed_name = 'June budget' proposal.proposed_start_date_time = '2018-06-01' proposal.proposed_end_date_time = '2018-07-01' proposal.proposed_spending_limit_micros = 5_000_000_000 end proposal_july = client.operation.create_resource.account_budget_proposal do |proposal| proposal.billing_setup = client.path.billing_setup(customer_id, billing_setup_id) proposal.proposal_type = :CREATE proposal.proposed_name = 'July budget' proposal.proposed_start_date_time = '2018-07-01' proposal.proposed_end_date_time = '2018-08-01' proposal.proposed_spending_limit_micros = 1_000_000_000 end # Send request to Google Ads API (not shown).
my $may_proposal = Google::Ads::GoogleAds::V18::Resources::AccountBudgetProposal->new({ billingSetup => Google::Ads::GoogleAds::V18::Utils::ResourceNames::billing_setup( $customer_id, $billing_setup_id ), proposalType => CREATE, proposedName => "May budget", proposedStartDateTime => "2018-05-01", proposedEndDateTime => "2018-06-01", proposedSpendingLimitMicros => 1000000000 }); my $june_proposal = Google::Ads::GoogleAds::V18::Resources::AccountBudgetProposal->new({ billingSetup => Google::Ads::GoogleAds::V18::Utils::ResourceNames::billing_setup( $customer_id, $billing_setup_id ), proposalType => CREATE, proposedName => "June budget", proposedStartDateTime => "2018-06-01", proposedEndDateTime => "2018-07-01", proposedSpendingLimitMicros => 5000000000 }); my $july_proposal = Google::Ads::GoogleAds::V18::Resources::AccountBudgetProposal->new({ billingSetup => Google::Ads::GoogleAds::V18::Utils::ResourceNames::billing_setup( $customer_id, $billing_setup_id ), proposalType => CREATE, proposedName => "July budget", proposedStartDateTime => "2018-07-01", proposedEndDateTime => "2018-08-01", proposedSpendingLimitMicros => 1000000000 }); # Send request to Google Ads API (not shown).
Notez l'utilisation de AccountBudgetProposalType.CREATE
dans chaque proposition. Cela crée trois budgets distincts, plutôt que de mettre à jour le même budget trois fois.
Mettre fin aux budgets de compte
Vous pouvez mettre fin aux budgets de votre compte lorsqu'ils sont actifs, et les supprimer complètement avant leur début ou lorsqu'ils sont en attente d'approbation.
Mettre fin au budget du compte actif
Vous ne pouvez pas supprimer le budget du compte actif. Vous pouvez toutefois définir l'heure de fin sur l'heure actuelle. Le moyen le plus simple d'y parvenir consiste à envoyer une proposition avec AccountBudgetProposalType.END
.
L'extrait de code suivant montre comment mettre fin à un budget de compte existant.
AccountBudgetProposal.newBuilder() .setProposalType(AccountBudgetProposalType.END) .setAccountBudget(accountBudget.getResourceName()) .build(); // Send request to Google Ads API (not shown).
AccountBudgetProposal proposal = new AccountBudgetProposal() { ProposalType = AccountBudgetProposalType.End, AccountBudget = accountBudget.ResourceName }; // Send request to Google Ads API (not shown).
$accountBudgetProposal = new AccountBudgetProposal([ 'proposal_type' => AccountBudgetProposalType::END, 'account_budget' => $accountBudget->getResourceName() ]) // Send request to Google Ads API (not shown).
account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation') proposal = account_budget_proposal_operation.create proposal.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').END proposal.account_budget = account_budget # Send request to Google Ads API (not shown).
proposal = client.resource.account_budget_proposal proposal.proposal_type = :END proposal.account_budget = account_budget.resource_name # Send request to Google Ads API (not shown).
my $account_budget_proposal = Google::Ads::GoogleAds::V18::Resources::AccountBudgetProposal->new({ proposalType => END, accountBudget => $account_budget->{resourceName}); # Send request to Google Ads API (not shown).
Cela équivaut à mettre à jour le budget d'un compte en définissant la date de fin sur TimeType.NOW
.
Supprimer un budget de compte approuvé avant son heure de début
Si vous avez proposé un budget de compte à commencer à l'avenir, vous pouvez le supprimer entièrement avant la date de début en envoyant un type de proposition AccountBudgetProposalType.REMOVE
.
L'extrait de code suivant montre comment supprimer un futur budget de compte existant.
AccountBudgetProposal.newBuilder() .setProposalType(AccountBudgetProposalType.REMOVE) .setAccountBudget(accountBudget.getResourceName()) .build(); // Send request to Google Ads API (not shown).
AccountBudgetProposal proposal = new AccountBudgetProposal() { ProposalType = AccountBudgetProposalType.Remove, AccountBudget = accountBudget.ResourceName }; // Send request to Google Ads API (not shown).
$accountBudgetProposal = new AccountBudgetProposal([ 'proposal_type' => AccountBudgetProposalType::REMOVE, 'account_budget' => $accountBudget->getResourceName() ]) // Send request to Google Ads API (not shown).
account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation') proposal = account_budget_proposal_operation.create proposal.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').REMOVE proposal.account_budget = account_budget # Send request to Google Ads API (not shown).
proposal = client.resource.account_budget_proposal proposal.proposal_type = :REMOVE proposal.account_budget = account_budget.resource_name # Send request to Google Ads API (not shown).
my $account_budget_proposal = Google::Ads::GoogleAds::V18::Resources::AccountBudgetProposal->new({ proposalType => REMOVE, accountBudget => $account_budget->{resourceName}); # Send request to Google Ads API (not shown).