Budgets du compte

Les budgets de compte contrôlent les dépenses d'un compte sur une période spécifique en définissant des propriétés de budget telles que la limite de dépenses, l'heure de début et l'heure de fin. Ils doivent pointer vers l'une des configurations de facturation du compte pour indiquer quel compte de paiement spécifique sera facturé. Vous pouvez créer, mettre à jour et supprimer les AccountBudget dans l'API Google Ads en envoyant des objets AccountBudgetProposal.

Les objets AccountBudget représentent le résultat final de l'application des propositions. Une fois une proposition approuvée, les modifications qu'elle contient (sous réserve d'ajustements) entraînent la création d'un budget de compte ou la mise à jour d'un budget existant. Cela dépend du proposal_type spécifié dans la demande.

AccountBudgetProposalType Description
CREATE Crée un budget de compte, qui doit être approuvé avant utilisation.
UPDATE Modifie un budget de compte existant.
END Définit l'heure de fin d'un budget de compte sur l'heure actuelle.
REMOVE Supprime un budget de compte avant son heure de début.

Les sections suivantes décrivent le comportement de chaque type de proposition.

Créer une proposition de budget de compte

Créer un budget de compte vous permet de contrôler les dépenses d'un client. Utilisez AccountBudgetProposalService pour créer un AccountBudgetProposal. Vous devez définir proposal_type sur CREATE pour indiquer qu'un nouveau budget doit être créé. Pour d'autres opérations, consultez la section Gestion de ce guide.

N'oubliez pas d'utiliser une configuration de la facturation avec un compte de paiement pour lequel vous disposez d'un accès en écriture. Pour en savoir plus, consultez le guide de configuration de la facturation.

L'exemple suivant montre comment créer une proposition de budget.

Java

private void runExample(GoogleAdsClient googleAdsClient, long customerId, long billingSetupId) {
  // Creates an AccountBudgetProposal. This will be reviewed offline by Google Ads, and if
  // approved will become an AccountBudget.
  AccountBudgetProposal proposal =
      AccountBudgetProposal.newBuilder()
          .setBillingSetup(ResourceNames.billingSetup(customerId, billingSetupId))
          .setProposalType(AccountBudgetProposalType.CREATE)
          .setProposedName("Account Budget (example)")

          // Specifies the account budget starts immediately.
          .setProposedStartTimeType(TimeType.NOW)
          // Alternatively you can specify a specific start time. Refer to the
          // AccountBudgetProposal
          // resource documentation for allowed formats.
          //
          // .setProposedStartDateTime("2020-01-02 03:04:05")

          // Specifies that the budget runs forever.
          .setProposedEndTimeType(TimeType.FOREVER)
          // Alternatively you can specify a specific end time. Allowed formats are as above.
          // .setProposedEndDateTime("2021-02-03 04:05:06")

          // Optional: sets notes for the budget. These are free text and do not effect budget
          // delivery.
          // .setProposedNotes("Received prepayment of $0.01")

          // Sets the spending limit to 0.01, measured in the Google Ads account currency.
          .setProposedSpendingLimitMicros(10_000)

          // Optional: sets PO number for record keeping. This value is at the user's
          // discretion, and has no effect on Google Billing & Payments.
          // .setProposedPurchaseOrderNumber("PO number 12345")
          .build();

  // Creates an operation which will add the new AccountBudgetProposal.
  AccountBudgetProposalOperation operation =
      AccountBudgetProposalOperation.newBuilder().setCreate(proposal).build();

  try (AccountBudgetProposalServiceClient accountBudgetProposalServiceClient =
      googleAdsClient.getLatestVersion().createAccountBudgetProposalServiceClient()) {
    // Sends the request to the Account Budget Proposal Service.
    MutateAccountBudgetProposalResponse response =
        accountBudgetProposalServiceClient.mutateAccountBudgetProposal(
            String.valueOf(customerId), operation);

    System.out.printf(
        "Account budget proposal created: %s.%n", response.getResult().getResourceName());
  }
}

C#

public void Run(GoogleAdsClient client, long customerId, long billingSetupId)
{
    // Get the AccountBudgetProposalServiceClient.
    AccountBudgetProposalServiceClient proposalService =
        client.GetService(Services.V25.AccountBudgetProposalService);

    // Create an AccountBudgetProposal. The proposal will be reviewed offline by Google Ads,
    // and if approved will become an AccountBudget.
    AccountBudgetProposal proposal = new AccountBudgetProposal()
    {
        BillingSetup = ResourceNames.BillingSetup(customerId, billingSetupId),
        ProposalType = AccountBudgetProposalType.Create,
        ProposedName = "Account Budget (example)",

        // Specify the account budget starts immediately
        ProposedStartTimeType = TimeType.Now,
        // Alternatively, you can specify a specific start time. Refer to the
        // AccountBudgetProposal resource documentation for allowed formats.
        //
        //ProposedStartDateTime = "2020-01-02 03:04:05",

        // Specify that the budget runs forever.
        ProposedEndTimeType = TimeType.Forever,
        // Alternatively you can specify a specific end time. Allowed formats are as above.
        //ProposedEndDateTime = "2021-02-03 04:05:06",

        // Optional: set notes for the budget. These are free text and do not effect budget
        // delivery.
        //ProposedNotes = "Received prepayment of $0.01",

        // Set the spending limit to 0.01, measured in the Google Ads account currency.
        ProposedSpendingLimitMicros = 10_000

        // Optional: set PO number for record keeping. This value is at the user's
        // discretion, and has no effect on Google Billing & Payments.
        //ProposedPurchaseOrderNumber = "PO number 12345"
    };

    // Create an operation which will add the new AccountBudgetProposal
    AccountBudgetProposalOperation operation = new AccountBudgetProposalOperation()
    {
        Create = proposal
    };

    try
    {
        // Send the request to the Account Budget Proposal Service.
        MutateAccountBudgetProposalResponse response = proposalService.
            MutateAccountBudgetProposal(customerId.ToString(), operation);

        // Display the results.
        Console.WriteLine($"Account budget proposal '{response.Result.ResourceName}' " +
            "was created.");
    }
    catch (GoogleAdsException e)
    {
        Console.WriteLine("Failure:");
        Console.WriteLine($"Message: {e.Message}");
        Console.WriteLine($"Failure: {e.Failure}");
        Console.WriteLine($"Request ID: {e.RequestId}");
        throw;
    }
}

PHP

public static function runExample(
    GoogleAdsClient $googleAdsClient,
    int $customerId,
    int $billingSetupId
) {
    // Constructs an account budget proposal.
    $accountBudgetProposal = new AccountBudgetProposal([
        'billing_setup' => ResourceNames::forBillingSetup($customerId, $billingSetupId),
        'proposal_type' => AccountBudgetProposalType::CREATE,
        'proposed_name' => 'Account Budget (example)',
        // Specifies the account budget starts immediately.
        'proposed_start_time_type' => TimeType::NOW,
        // Alternatively you can specify a specific start time. Refer to the
        // AccountBudgetProposal class for allowed formats.
        //
        // 'proposed_start_date_time' => '2020-01-02 03:04:05',

        // Specify that the budget runs forever.
        'proposed_end_time_type' => TimeType::FOREVER,
        // Alternatively you can specify a specific end time. Allowed formats are as above.
        // 'proposed_end_date_time' => '2021-02-03 04:05:06',

        // Optional: set notes for the budget. These are free text and do not effect budget
        // delivery.
        // 'proposed_notes' => 'Received prepayment of $0.01',

        // Optional: set PO number for record keeping. This value is at the user's
        // discretion, and has no effect on Google Billing & Payments.
        // 'proposed_purchase_order_number' => 'PO number 12345',

        // Set the spending limit to 0.01, measured in the Google Ads account currency.
        'proposed_spending_limit_micros' => 10000
    ]);

    $accountBudgetProposalOperation = new AccountBudgetProposalOperation();
    $accountBudgetProposalOperation->setCreate($accountBudgetProposal);

    // Issues a mutate request to add the account budget proposal.
    $accountBudgetProposalServiceClient =
        $googleAdsClient->getAccountBudgetProposalServiceClient();
    $response = $accountBudgetProposalServiceClient->mutateAccountBudgetProposal(
        MutateAccountBudgetProposalRequest::build($customerId, $accountBudgetProposalOperation)
    );

    printf(
        "Added an account budget proposal with resource name '%s'.%s",
        $response->getResult()->getResourceName(),
        PHP_EOL
    );
}

Python

def main(client: GoogleAdsClient, customer_id: str, billing_setup_id: str):
    account_budget_proposal_service = client.get_service(
        "AccountBudgetProposalService"
    )
    billing_setup_service = client.get_service("BillingSetupService")

    account_budget_proposal_operation = client.get_type(
        "AccountBudgetProposalOperation"
    )
    proposal = account_budget_proposal_operation.create

    proposal.proposal_type = client.enums.AccountBudgetProposalTypeEnum.CREATE
    proposal.billing_setup = billing_setup_service.billing_setup_path(
        customer_id, billing_setup_id
    )
    proposal.proposed_name = "Account Budget Proposal (example)"

    # Specify the account budget starts immediately
    proposal.proposed_start_time_type = client.enums.TimeTypeEnum.NOW
    # Alternatively you can specify a specific start time. Refer to the
    # AccountBudgetProposal resource documentation for allowed formats.
    #
    # proposal.proposed_start_date_time = '2020-01-02 03:04:05'

    # Specify that the budget runs forever
    proposal.proposed_end_time_type = client.enums.TimeTypeEnum.FOREVER
    # Alternatively you can specify a specific end time. Allowed formats are as
    # above.
    #
    # proposal.proposed_end_date_time = '2021-01-02 03:04:05'

    # Optional: set notes for the budget. These are free text and do not effect
    # budget delivery.
    #
    # proposal.proposed_notes = 'Received prepayment of $0.01'
    proposal.proposed_spending_limit_micros = 10000

    account_budget_proposal_response = (
        account_budget_proposal_service.mutate_account_budget_proposal(
            customer_id=customer_id,
            operation=account_budget_proposal_operation,
        )
    )
    print(
        "Created account budget proposal "
        f'"{account_budget_proposal_response.result.resource_name}".'
    )

Ruby

def add_account_budget_proposal(customer_id, billing_setup_id)
  # GoogleAdsClient will read a config file from
  # ENV['HOME']/google_ads_config.rb when called without parameters
  client = Google::Ads::GoogleAds::GoogleAdsClient.new


  operation = client.operation.create_resource.account_budget_proposal do |proposal|
    proposal.billing_setup = client.path.billing_setup(customer_id, billing_setup_id)
    proposal.proposal_type = :CREATE
    proposal.proposed_name = 'Account Budget (example)'

    # Specify the account budget starts immediately
    proposal.proposed_start_time_type = :NOW
    # Alternatively you can specify a specific start time. Refer to the
    # AccountBudgetProposal resource documentation for allowed formats.
    #
    # proposal.proposed_start_date_time = '2020-01-02 03:04:05'

    # Specify that the budget runs forever.
    proposal.proposed_end_time_type = :FOREVER
    # Alternatively you can specify a specific end time. Allowed formats are as
    # above.
    #
    # proposal.proposed_end_date_time = '2021-01-02 03:04:05'

    # Optional: set notes for the budget. These are free text and do not affect
    # budget delivery.
    #
    # proposal.proposed_notes = 'Received prepayment of $0.01'

    # Set the spending limit to 0.01, measured in the Google Ads account currency.
    proposal.proposed_spending_limit_micros = 10_000
  end

  account_budget_proposal_service = client.service.account_budget_proposal
  # Add budget proposal.
  response = account_budget_proposal_service.mutate_account_budget_proposal(
    customer_id: customer_id,
    operation: operation,
  )

  puts sprintf("Created budget proposal %s.",
      response.results.first.resource_name)
end

Perl

sub add_account_budget_proposal {
  my ($api_client, $customer_id, $billing_setup_id) = @_;

  # Create an account budget proposal.
  my $account_budget_proposal =
    Google::Ads::GoogleAds::V25::Resources::AccountBudgetProposal->new({
      billingSetup =>
        Google::Ads::GoogleAds::V25::Utils::ResourceNames::billing_setup(
        $customer_id, $billing_setup_id
        ),
      proposalType => CREATE,
      proposedName => "Account Budget (example)",
      # Specify that the account budget starts immediately.
      proposedStartTimeType => NOW,
      # Alternatively you can specify a specific start time. Refer to the
      # AccountBudgetProposal class for allowed formats.
      #
      # proposedStartDateTime => "2020-01-02 03:04:05",

      # Specify that the account budget runs forever.
      proposedEndDateTime => FOREVER,
      # Alternatively you can specify a specific end time. Allowed formats are as below.
      # proposedEndDateTime => "2021-02-03 04:05:06",

      # Optional: set notes for the budget. These are free text and do not effect budget
      # delivery.
      # proposedNotes => "Received prepayment of $0.01",

      # Optional: set PO number for record keeping. This value is at the user's
      # discretion, and has no effect on Google Billing & Payments.
      # proposedPurchaseOrderNumber => "PO number 12345",

      # Set the spending limit to 0.01, measured in the Google Ads account currency.
      proposedSpendingLimitMicros => 10000
    });

  # Create an account budget proposal operation.
  my $account_budget_proposal_operation =
    Google::Ads::GoogleAds::V25::Services::AccountBudgetProposalService::AccountBudgetProposalOperation
    ->new({
      create => $account_budget_proposal
    });

  # Add the account budget proposal.
  my $account_budget_proposal_response =
    $api_client->AccountBudgetProposalService()->mutate({
      customerId => $customer_id,
      operation  => $account_budget_proposal_operation
    });

  printf "Created account budget proposal '%s'.\n",
    $account_budget_proposal_response->{result}{resourceName};

  return 1;
}

curl

Dans les demandes de proposition de budget de compte, proposed_start_date_time et proposed_end_date_time sont toujours dans le fuseau horaire du compte client. Vous ne pouvez pas spécifier de fuseau horaire. La limite de dépenses proposée est toujours mesurée dans la devise du compte.Spécifiez-la en utilisant des micro-unités (1 € = 1 000 000 de micros).

Vous pouvez également inclure un numéro de bon de commande qui s'affichera à côté de ces frais sur la facture. Cela n'a aucune incidence sur la diffusion du budget.

Supprimer une proposition de budget de compte en attente

Vous pouvez supprimer une proposition de budget en attente en envoyant une requête AccountBudgetProposalOperation.remove avec le nom de ressource de la proposition de budget du compte. Toutefois, notez que les propositions de budget sont généralement appliquées en quelques minutes.

Java
AccountBudgetProposalOperation operation = AccountBudgetProposalOperation.newBuilder()
  .setRemove(ResourceNames.accountBudgetProposal(customerId, accountBudgetProposalId))
  .build();

// Send request to Google Ads API (not shown).
C#
AccountBudgetProposalOperation operation = new AccountBudgetProposalOperation()
{
    Remove = ResourceNames.AccountBudgetProposal(customerId, accountBudgetProposalId)
};

// Send request to Google Ads API (not shown).
PHP
$accountBudgetProposalOperation = new AccountBudgetProposalOperation();
$accountBudgetProposalOperation->setRemove(ResourceNames::forAccountBudgetProposal($customerId, $accountBudgetProposalId));

// Send request to Google Ads API (not shown).
Python
account_budget_proposal_service = client.get_service('AccountBudgetProposalService')
account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation')
account_budget_proposal_operation.remove = (
    account_budget_proposal_service.account_budget_proposal_path(
        customer_id, account_budget_proposal_id
    )
)

# Send request to Google Ads API (not shown).
Ruby
operation = client.operation.remove_resource.account_budget_proposal(client.path.account_budget_proposal(customer_id, account_budget_proposal_id))

# Send request to Google Ads API (not shown).
Perl
my $account_budget_proposal_operation =
  Google::Ads::GoogleAds::V25::Services::AccountBudgetProposalService::AccountBudgetProposalOperation
    ->new({
      remove => Google::Ads::GoogleAds::V25::Utils::ResourceNames::account_budget_proposal(
          $customer_id, $account_budget_proposal_id
        )
    });

# Send request to Google Ads API (not shown).

Si vous avez fait une erreur dans la proposition d'origine, vous pouvez la renvoyer en tant qu'opération UPDATE. Consultez Mettre à jour un budget de compte existant.

Récupérer les budgets de compte existants

La requête suivante du langage de requête Google Ads (GAQL) récupère tous les budgets de compte existants dans un compte :

SELECT
  account_budget.resource_name,
  account_budget.id,
  account_budget.name,
  account_budget.status,
  account_budget.billing_setup,
  account_budget.approved_spending_limit_micros,
  account_budget.approved_spending_limit_type,
  account_budget.proposed_spending_limit_micros,
  account_budget.proposed_spending_limit_type,
  account_budget.adjusted_spending_limit_micros,
  account_budget.adjusted_spending_limit_type,
  account_budget.approved_start_date_time,
  account_budget.proposed_start_date_time,
  account_budget.approved_end_date_time,
  account_budget.approved_end_time_type,
  account_budget.proposed_end_date_time,
  account_budget.proposed_end_time_type
FROM
  account_budget

Les champs qui encapsulent l'heure de début, l'heure de fin et la limite de dépenses du budget du compte comportent plusieurs variantes avec des préfixes tels que proposed et approved. Ils permettent de comparer les valeurs initialement proposées à celles qui ont été approuvées. La limite de dépenses comporte des champs supplémentaires avec le préfixe adjusted pour indiquer la limite de dépenses actuelle en vigueur après l'application des ajustements au montant approuvé.

La limite de dépenses approuvée d'un budget de compte peut être ajustée au fil du temps pour refléter divers avoirs (par exemple, pour les impressions excessives, l'activité incorrecte liée aux clics et les bons promotionnels). Pour en savoir plus sur les budgets de compte et les crédits et ajustements de compte, consultez le centre d'aide Google Ads.

Tous les nouveaux budgets de compte en attente d'approbation, ainsi que tous les budgets de compte existants en attente de mise à jour, seront également renseignés dans le message imbriqué pending_proposal, dont les sous-champs peuvent être sélectionnés dans une requête GAQL (par exemple, account_budget_proposal, interrogé en tant que account_budget.pending_proposal.account_budget_proposal, pour le nom de ressource de l'objet AccountBudgetProposal associé).

Gérer les budgets de compte existants

Une fois que vous avez créé un budget de compte pour un client, vous pouvez utiliser AccountBudgetProposalService pour gérer les paramètres du budget. Les opérations de gestion les plus courantes consistent à mettre à jour les champs proposed_spending_limit_micros et proposed_end_date_time. Pour obtenir la liste complète des champs modifiables, consultez la documentation de référence AccountBudgetProposal.

Vous pouvez modifier un budget de compte existant ou en créer un. Les deux options sont présentées ici.

Modifier un budget de compte existant

Vous pouvez mettre à jour les champs de budget de compte existants en envoyant des objets AccountBudgetProposal avec AccountBudgetProposalType défini sur UPDATE. Notez que vous devez également indiquer les champs mis à jour dans l'argument update_mask de l'opération.

L'extrait de code suivant montre comment mettre à jour la limite de dépenses proposée pour un budget de compte existant.

Java
AccountBudgetProposal proposal = AccountBudgetProposal.newBuilder()
  .setProposalType(AccountBudgetProposalType.UPDATE)
  .setAccountBudget(accountBudget.getResourceName())
  .setProposedSpendingLimitMicros(
    accountBudget.getProposedSpendingLimitMicros() + increaseAmount)
  .build();

AccountBudgetProposalOperation operation = AccountBudgetProposalOperation.newBuilder()
  .setCreate(proposal)
  .setUpdateMask(
      FieldMask.newBuilder().addAllPaths(Arrays.asList("proposed_spending_limit_micros")).build())
  .build();

// Send request to Google Ads API (not shown).
C#
AccountBudgetProposal proposal = new AccountBudgetProposal()
{
  ProposalType = AccountBudgetProposalType.Update,
  AccountBudget = accountBudget.ResourceName,
  ProposedSpendingLimitMicros = accountBudget.ProposedSpendingLimitMicros + increaseAmount
};

AccountBudgetProposalOperation operation = new AccountBudgetProposalOperation()
{
  Create = proposal,
  UpdateMask = new FieldMask()
  {
    Paths = { "proposed_spending_limit_micros" }
  }
};

// Send request to Google Ads API (not shown).
PHP
$accountBudgetProposal = new AccountBudgetProposal([
  'proposal_type' => AccountBudgetProposalType::UPDATE,
  'account_budget' => $accountBudget->getResourceName(),
  'proposed_spending_limit_micros' =>
    $accountBudget->getProposedSpendingLimitMicros() + $increaseAmount
]);

$accountBudgetProposalOperation = new AccountBudgetProposalOperation();
$accountBudgetProposalOperation->setCreate($accountBudgetProposal);
$accountBudgetProposalOperation->setUpdateMask(
  FieldMasks::allSetFieldsOf($accountBudgetProposal)
);

// Send request to Google Ads API (not shown).
Python
account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation')

proposal = account_budget_proposal_operation.create
proposal.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').AccountBudgetProposalType.UPDATE
proposal.account_budget = account_budget.resource_name
proposal.proposed_spending_limit_micros = account_budget.proposed_spending_limit_micros + increase_amount

field_mask = protobuf_helpers.field_mask(None, proposal._pb)
account_budget_proposal_operation.update_mask.CopyFrom(field_mask)

# Send request to Google Ads API (not shown).
Ruby
proposal = client.resource.account_budget_proposal
proposal.proposal_type = :UPDATE

mask = client.field_mask.with proposal do
  proposal.account_budget = account_budget.resource_name
  proposal.proposed_spending_limit_micros = account_budget.proposed_spending_limit_micros + increase_amount
end

operation = client.operation.account_budget_proposal do |op|
  op.create = proposal
  op.update_mask = mask
end

# Send request to Google Ads API (not shown).
Perl
my $account_budget_proposal =
  Google::Ads::GoogleAds::V25::Resources::AccountBudgetProposal->new({
    proposalType => UPDATE,
    accountBudget => $account_budget->{resourceName},
    proposedSpendingLimitMicros => $account_budget->{proposedSpendingLimitMicros} + $increaseAmount});

my $account_budget_proposal_operation =
  Google::Ads::GoogleAds::V25::Services::AccountBudgetProposalService::AccountBudgetProposalOperation
    ->new({
      create => $account_budget_proposal,
      updateMask => all_set_fields_of($account_budget_proposal)});

# Send request to Google Ads API (not shown).

Enchaînement des budgets de compte

Au lieu de modifier le budget existant, Google Ads vous permet d'enchaîner plusieurs budgets de compte pour qu'ils s'exécutent les uns après les autres. Dans l'exemple suivant, un client dispose de limites de dépenses différentes chaque mois.

Diagramme montrant une chaîne de budgets de compte avec des limites de dépense différentes chaque mois.
Exemple d'enchaînement de budgets de compte.

Pour ce faire, créez trois objets AccountBudgetProposal et envoyez chaque AccountBudgetProposalOperation à AccountBudgetProposalService dans une requête MutateAccountBudgetProposal distincte (car MutateAccountBudgetProposalRequest n'accepte qu'un seul operation par appel).

L'extrait suivant montre comment créer une telle chaîne à l'aide d'une configuration de facturation existante.

Java
AccountBudgetProposal proposalMay = AccountBudgetProposal.newBuilder()
  .setBillingSetup(ResourceNames.billingSetup(customerId, billingSetupId))
  .setProposalType(AccountBudgetProposalType.CREATE)
  .setProposedName("May budget")
  .setProposedStartDateTime("2027-05-01 00:00:00")
  .setProposedEndDateTime("2027-06-01 00:00:00")
  .setProposedSpendingLimitMicros(1_000_000_000L)
  .build();

AccountBudgetProposalOperation operationMay = AccountBudgetProposalOperation.newBuilder()
  .setCreate(proposalMay)
  .build();

AccountBudgetProposal proposalJune = AccountBudgetProposal.newBuilder()
  .setBillingSetup(ResourceNames.billingSetup(customerId, billingSetupId))
  .setProposalType(AccountBudgetProposalType.CREATE)
  .setProposedName("June budget")
  .setProposedStartDateTime("2027-06-01 00:00:00")
  .setProposedEndDateTime("2027-07-01 00:00:00")
  .setProposedSpendingLimitMicros(5_000_000_000L)
  .build();

AccountBudgetProposalOperation operationJune = AccountBudgetProposalOperation.newBuilder()
  .setCreate(proposalJune)
  .build();

AccountBudgetProposal proposalJuly = AccountBudgetProposal.newBuilder()
  .setBillingSetup(ResourceNames.billingSetup(customerId, billingSetupId))
  .setProposalType(AccountBudgetProposalType.CREATE)
  .setProposedName("July budget")
  .setProposedStartDateTime("2027-07-01 00:00:00")
  .setProposedEndDateTime("2027-08-01 00:00:00")
  .setProposedSpendingLimitMicros(1_000_000_000L)
  .build();

AccountBudgetProposalOperation operationJuly = AccountBudgetProposalOperation.newBuilder()
  .setCreate(proposalJuly)
  .build();

// Send requests to Google Ads API, one MutateAccountBudgetProposal call per operation (not shown).
C#
AccountBudgetProposal proposalMay = new AccountBudgetProposal()
{
  BillingSetup = ResourceNames.BillingSetup(customerId, billingSetupId),
  ProposalType = AccountBudgetProposalType.Create,
  ProposedName = "May budget",
  ProposedStartDateTime = "2027-05-01 00:00:00",
  ProposedEndDateTime = "2027-06-01 00:00:00",
  ProposedSpendingLimitMicros = 1_000_000_000
};

AccountBudgetProposalOperation operationMay = new AccountBudgetProposalOperation()
{
  Create = proposalMay
};

AccountBudgetProposal proposalJune = new AccountBudgetProposal()
{
  BillingSetup = ResourceNames.BillingSetup(customerId, billingSetupId),
  ProposalType = AccountBudgetProposalType.Create,
  ProposedName = "June budget",
  ProposedStartDateTime = "2027-06-01 00:00:00",
  ProposedEndDateTime = "2027-07-01 00:00:00",
  ProposedSpendingLimitMicros = 5_000_000_000
};

AccountBudgetProposalOperation operationJune = new AccountBudgetProposalOperation()
{
  Create = proposalJune
};

AccountBudgetProposal proposalJuly = new AccountBudgetProposal()
{
  BillingSetup = ResourceNames.BillingSetup(customerId, billingSetupId),
  ProposalType = AccountBudgetProposalType.Create,
  ProposedName = "July budget",
  ProposedStartDateTime = "2027-07-01 00:00:00",
  ProposedEndDateTime = "2027-08-01 00:00:00",
  ProposedSpendingLimitMicros = 1_000_000_000
};

AccountBudgetProposalOperation operationJuly = new AccountBudgetProposalOperation()
{
  Create = proposalJuly
};

// Send requests to Google Ads API, one MutateAccountBudgetProposal call per operation (not shown).
PHP
$proposalMay = new AccountBudgetProposal([
  'billing_setup' => ResourceNames::forBillingSetup($customerId, $billingSetupId),
  'proposal_type' => AccountBudgetProposalType::CREATE,
  'proposed_name' => 'May budget',
  'proposed_start_date_time' => '2027-05-01 00:00:00',
  'proposed_end_date_time' => '2027-06-01 00:00:00',
  'proposed_spending_limit_micros' => 1000000000
]);
$operationMay = new AccountBudgetProposalOperation();
$operationMay->setCreate($proposalMay);

$proposalJune = new AccountBudgetProposal([
  'billing_setup' => ResourceNames::forBillingSetup($customerId, $billingSetupId),
  'proposal_type' => AccountBudgetProposalType::CREATE,
  'proposed_name' => 'June budget',
  'proposed_start_date_time' => '2027-06-01 00:00:00',
  'proposed_end_date_time' => '2027-07-01 00:00:00',
  'proposed_spending_limit_micros' => 5000000000
]);
$operationJune = new AccountBudgetProposalOperation();
$operationJune->setCreate($proposalJune);

$proposalJuly = new AccountBudgetProposal([
  'billing_setup' => ResourceNames::forBillingSetup($customerId, $billingSetupId),
  'proposal_type' => AccountBudgetProposalType::CREATE,
  'proposed_name' => 'July budget',
  'proposed_start_date_time' => '2027-07-01 00:00:00',
  'proposed_end_date_time' => '2027-08-01 00:00:00',
  'proposed_spending_limit_micros' => 1000000000
]);
$operationJuly = new AccountBudgetProposalOperation();
$operationJuly->setCreate($proposalJuly);

// Send requests to Google Ads API, one MutateAccountBudgetProposal call per operation (not shown).
Python
billing_setup_service = client.get_service('BillingSetupService')

may_account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation')
proposal_may = may_account_budget_proposal_operation.create
proposal_may.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').AccountBudgetProposalType.CREATE
proposal_may.billing_setup = billing_setup_service.billing_setup_path(customer_id, billing_setup_id)
proposal_may.proposed_name = 'May budget'
proposal_may.proposed_start_date_time = '2027-05-01 00:00:00'
proposal_may.proposed_end_date_time = '2027-06-01 00:00:00'
proposal_may.proposed_spending_limit_micros = 1000000000

june_account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation')
proposal_june = june_account_budget_proposal_operation.create
proposal_june.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').AccountBudgetProposalType.CREATE
proposal_june.billing_setup = billing_setup_service.billing_setup_path(customer_id, billing_setup_id)
proposal_june.proposed_name = 'June budget'
proposal_june.proposed_start_date_time = '2027-06-01 00:00:00'
proposal_june.proposed_end_date_time = '2027-07-01 00:00:00'
proposal_june.proposed_spending_limit_micros = 5000000000

july_account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation')
proposal_july = july_account_budget_proposal_operation.create
proposal_july.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').AccountBudgetProposalType.CREATE
proposal_july.billing_setup = billing_setup_service.billing_setup_path(customer_id, billing_setup_id)
proposal_july.proposed_name = 'July budget'
proposal_july.proposed_start_date_time = '2027-07-01 00:00:00'
proposal_july.proposed_end_date_time = '2027-08-01 00:00:00'
proposal_july.proposed_spending_limit_micros = 1000000000

# Send requests to Google Ads API, one MutateAccountBudgetProposal call per operation (not shown).
Ruby
operation_may = client.operation.create_resource.account_budget_proposal do |proposal|
  proposal.billing_setup = client.path.billing_setup(customer_id, billing_setup_id)
  proposal.proposal_type = :CREATE
  proposal.proposed_name = 'May budget'
  proposal.proposed_start_date_time = '2027-05-01 00:00:00'
  proposal.proposed_end_date_time = '2027-06-01 00:00:00'
  proposal.proposed_spending_limit_micros = 1_000_000_000
end

operation_june = client.operation.create_resource.account_budget_proposal do |proposal|
  proposal.billing_setup = client.path.billing_setup(customer_id, billing_setup_id)
  proposal.proposal_type = :CREATE
  proposal.proposed_name = 'June budget'
  proposal.proposed_start_date_time = '2027-06-01 00:00:00'
  proposal.proposed_end_date_time = '2027-07-01 00:00:00'
  proposal.proposed_spending_limit_micros = 5_000_000_000
end

operation_july = client.operation.create_resource.account_budget_proposal do |proposal|
  proposal.billing_setup = client.path.billing_setup(customer_id, billing_setup_id)
  proposal.proposal_type = :CREATE
  proposal.proposed_name = 'July budget'
  proposal.proposed_start_date_time = '2027-07-01 00:00:00'
  proposal.proposed_end_date_time = '2027-08-01 00:00:00'
  proposal.proposed_spending_limit_micros = 1_000_000_000
end

# Send requests to Google Ads API, one MutateAccountBudgetProposal call per operation (not shown).
Perl
my $may_proposal =
  Google::Ads::GoogleAds::V25::Resources::AccountBudgetProposal->new({
    billingSetup =>
      Google::Ads::GoogleAds::V25::Utils::ResourceNames::billing_setup(
      $customer_id, $billing_setup_id
      ),
    proposalType => CREATE,
    proposedName => "May budget",
    proposedStartDateTime => "2027-05-01 00:00:00",
    proposedEndDateTime => "2027-06-01 00:00:00",
    proposedSpendingLimitMicros => 1000000000
  });
my $may_operation =
  Google::Ads::GoogleAds::V25::Services::AccountBudgetProposalService::AccountBudgetProposalOperation
    ->new({create => $may_proposal});

my $june_proposal =
  Google::Ads::GoogleAds::V25::Resources::AccountBudgetProposal->new({
    billingSetup =>
      Google::Ads::GoogleAds::V25::Utils::ResourceNames::billing_setup(
      $customer_id, $billing_setup_id
      ),
    proposalType => CREATE,
    proposedName => "June budget",
    proposedStartDateTime => "2027-06-01 00:00:00",
    proposedEndDateTime => "2027-07-01 00:00:00",
    proposedSpendingLimitMicros => 5000000000
  });
my $june_operation =
  Google::Ads::GoogleAds::V25::Services::AccountBudgetProposalService::AccountBudgetProposalOperation
    ->new({create => $june_proposal});

my $july_proposal =
  Google::Ads::GoogleAds::V25::Resources::AccountBudgetProposal->new({
    billingSetup =>
      Google::Ads::GoogleAds::V25::Utils::ResourceNames::billing_setup(
      $customer_id, $billing_setup_id
      ),
    proposalType => CREATE,
    proposedName => "July budget",
    proposedStartDateTime => "2027-07-01 00:00:00",
    proposedEndDateTime => "2027-08-01 00:00:00",
    proposedSpendingLimitMicros => 1000000000
  });
my $july_operation =
  Google::Ads::GoogleAds::V25::Services::AccountBudgetProposalService::AccountBudgetProposalOperation
    ->new({create => $july_proposal});

# Send requests to Google Ads API, one MutateAccountBudgetProposal call per operation (not shown).

Notez l'utilisation de AccountBudgetProposalType.CREATE dans chaque proposition. Trois budgets distincts seront créés, au lieu d'un seul budget mis à jour trois fois.

Résilier les budgets de compte

Vous pouvez mettre fin à un budget de compte lorsqu'il est actif, et le supprimer entièrement avant son début ou lorsqu'il est en attente d'approbation.

Mettre fin au budget du compte actif

Vous ne pouvez pas supprimer le budget du compte actif. Vous pouvez toutefois définir l'heure de fin sur l'heure actuelle. Pour ce faire, le moyen le plus simple consiste à envoyer une proposition avec AccountBudgetProposalType.END.

L'extrait de code suivant montre comment mettre fin à un budget de compte existant.

Java
AccountBudgetProposal proposal = AccountBudgetProposal.newBuilder()
  .setProposalType(AccountBudgetProposalType.END)
  .setAccountBudget(accountBudget.getResourceName())
  .build();

AccountBudgetProposalOperation operation = AccountBudgetProposalOperation.newBuilder()
  .setCreate(proposal)
  .build();

// Send request to Google Ads API (not shown).
C#
AccountBudgetProposal proposal = new AccountBudgetProposal()
{
  ProposalType = AccountBudgetProposalType.End,
  AccountBudget = accountBudget.ResourceName
};

AccountBudgetProposalOperation operation = new AccountBudgetProposalOperation()
{
  Create = proposal
};

// Send request to Google Ads API (not shown).
PHP
$accountBudgetProposal = new AccountBudgetProposal([
  'proposal_type' => AccountBudgetProposalType::END,
  'account_budget' => $accountBudget->getResourceName()
]);

$accountBudgetProposalOperation = new AccountBudgetProposalOperation();
$accountBudgetProposalOperation->setCreate($accountBudgetProposal);

// Send request to Google Ads API (not shown).
Python
account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation')
proposal = account_budget_proposal_operation.create
proposal.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').AccountBudgetProposalType.END
proposal.account_budget = account_budget.resource_name

# Send request to Google Ads API (not shown).
Ruby
operation = client.operation.create_resource.account_budget_proposal do |proposal|
  proposal.proposal_type = :END
  proposal.account_budget = account_budget.resource_name
end

# Send request to Google Ads API (not shown).
Perl
my $account_budget_proposal =
  Google::Ads::GoogleAds::V25::Resources::AccountBudgetProposal->new({
    proposalType => END,
    accountBudget => $account_budget->{resourceName}
  });

my $account_budget_proposal_operation =
  Google::Ads::GoogleAds::V25::Services::AccountBudgetProposalService::AccountBudgetProposalOperation
    ->new({create => $account_budget_proposal});

# Send request to Google Ads API (not shown).

Cela équivaut à mettre à jour un budget de compte en définissant la date et l'heure de fin sur TimeType.NOW.

Supprimer un budget de compte approuvé avant son heure de début

Si vous avez proposé un budget de compte qui doit commencer à l'avenir, vous pouvez le supprimer entièrement avant l'heure de début en envoyant une proposition de type AccountBudgetProposalType.REMOVE.

L'extrait suivant montre comment supprimer un budget de compte futur existant.

Java
AccountBudgetProposal proposal = AccountBudgetProposal.newBuilder()
  .setProposalType(AccountBudgetProposalType.REMOVE)
  .setAccountBudget(accountBudget.getResourceName())
  .build();

AccountBudgetProposalOperation operation = AccountBudgetProposalOperation.newBuilder()
  .setCreate(proposal)
  .build();

// Send request to Google Ads API (not shown).
C#
AccountBudgetProposal proposal = new AccountBudgetProposal()
{
  ProposalType = AccountBudgetProposalType.Remove,
  AccountBudget = accountBudget.ResourceName
};

AccountBudgetProposalOperation operation = new AccountBudgetProposalOperation()
{
  Create = proposal
};

// Send request to Google Ads API (not shown).
PHP
$accountBudgetProposal = new AccountBudgetProposal([
  'proposal_type' => AccountBudgetProposalType::REMOVE,
  'account_budget' => $accountBudget->getResourceName()
]);

$accountBudgetProposalOperation = new AccountBudgetProposalOperation();
$accountBudgetProposalOperation->setCreate($accountBudgetProposal);

// Send request to Google Ads API (not shown).
Python
account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation')
proposal = account_budget_proposal_operation.create
proposal.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').AccountBudgetProposalType.REMOVE
proposal.account_budget = account_budget.resource_name

# Send request to Google Ads API (not shown).
Ruby
operation = client.operation.create_resource.account_budget_proposal do |proposal|
  proposal.proposal_type = :REMOVE
  proposal.account_budget = account_budget.resource_name
end

# Send request to Google Ads API (not shown).
Perl
my $account_budget_proposal =
  Google::Ads::GoogleAds::V25::Resources::AccountBudgetProposal->new({
    proposalType => REMOVE,
    accountBudget => $account_budget->{resourceName}
  });

my $account_budget_proposal_operation =
  Google::Ads::GoogleAds::V25::Services::AccountBudgetProposalService::AccountBudgetProposalOperation
    ->new({create => $account_budget_proposal});

# Send request to Google Ads API (not shown).
Précédent
Configuration de la facturation
Suivant
Facture