تستخدم Google تكنولوجيا الذكاء الاصطناعي لترجمة المحتوى إلى لغتك المفضّلة، وقد تتضمّن بعض الأخطاء.

ميزانيات الحساب

تتحكّم ميزانيات الحساب في المبلغ الذي يمكن أن ينفقه الحساب خلال فترة زمنية معيّنة من خلال تحديد خصائص الميزانية، مثل الحدّ الأقصى للإنفاق ووقت البدء ووقت الانتهاء. يجب أن تشير إلى أحد إعدادات الفوترة في الحساب لتحديد حساب الدفعات الذي سيتم إرسال الفواتير إليه. يمكنك إنشاء AccountBudget وتعديله وإزالته في Google Ads API عن طريق إرسال عناصر AccountBudgetProposal.

تمثّل عناصر AccountBudget النتيجة النهائية لتطبيق الاقتراحات. بعد الموافقة على عرض الأسعار، ستؤدي التغييرات التي تم إجراؤها عليه (مع مراعاة أي تعديلات) إلى إنشاء ميزانية حساب جديدة أو تعديل ميزانية حالية. يعتمد ذلك على proposal_type المحدّد في الطلب.

`AccountBudgetProposalType`	الوصف
`CREATE`	تُنشئ هذه الطريقة ميزانية حساب جديدة يجب الموافقة عليها قبل استخدامها.
`UPDATE`	تعدّل هذه الطريقة ميزانية حساب حالية.
`END`	تضبط هذه السمة وقت انتهاء ميزانية الحساب على الوقت الحالي.
`REMOVE`	تزيل هذه الطريقة ميزانية حساب قبل وقت بدئها.

توضّح الأقسام التالية سلوك كل نوع من أنواع العروض.

إنشاء اقتراح ميزانية حساب

يتيح لك إنشاء ميزانية حساب التحكّم في سلوك الإنفاق لدى العميل. استخدِم AccountBudgetProposalService لإنشاء AccountBudgetProposal جديد. يجب ضبط proposal_type على CREATE لتحديد أنّه يجب إنشاء ميزانية جديدة. يُرجى الرجوع إلى قسم الإدارة في هذا الدليل للاطّلاع على العمليات الأخرى.

تذكَّر استخدام إعدادات الفوترة مع حساب دفعات لديك إذن بالكتابة فيه. راجِع دليل إعداد الفوترة للاطّلاع على التفاصيل.

يوضّح المثال التالي كيفية إنشاء اقتراح ميزانية جديد.

جافا

private void runExample(GoogleAdsClient googleAdsClient, long customerId, long billingSetupId) {
  // Creates an AccountBudgetProposal. This will be reviewed offline by Google Ads, and if
  // approved will become an AccountBudget.
  AccountBudgetProposal proposal =
      AccountBudgetProposal.newBuilder()
          .setBillingSetup(ResourceNames.billingSetup(customerId, billingSetupId))
          .setProposalType(AccountBudgetProposalType.CREATE)
          .setProposedName("Account Budget (example)")

          // Specifies the account budget starts immediately.
          .setProposedStartTimeType(TimeType.NOW)
          // Alternatively you can specify a specific start time. Refer to the
          // AccountBudgetProposal
          // resource documentation for allowed formats.
          //
          // .setProposedStartDateTime("2020-01-02 03:04:05")

          // Specifies that the budget runs forever.
          .setProposedEndTimeType(TimeType.FOREVER)
          // Alternatively you can specify a specific end time. Allowed formats are as above.
          // .setProposedEndDateTime("2021-02-03 04:05:06")

          // Optional: sets notes for the budget. These are free text and do not effect budget
          // delivery.
          // .setProposedNotes("Received prepayment of $0.01")

          // Sets the spending limit to 0.01, measured in the Google Ads account currency.
          .setProposedSpendingLimitMicros(10_000)

          // Optional: sets PO number for record keeping. This value is at the user's
          // discretion, and has no effect on Google Billing & Payments.
          // .setProposedPurchaseOrderNumber("PO number 12345")
          .build();

  // Creates an operation which will add the new AccountBudgetProposal.
  AccountBudgetProposalOperation operation =
      AccountBudgetProposalOperation.newBuilder().setCreate(proposal).build();

  try (AccountBudgetProposalServiceClient accountBudgetProposalServiceClient =
      googleAdsClient.getLatestVersion().createAccountBudgetProposalServiceClient()) {
    // Sends the request to the Account Budget Proposal Service.
    MutateAccountBudgetProposalResponse response =
        accountBudgetProposalServiceClient.mutateAccountBudgetProposal(
            String.valueOf(customerId), operation);

    System.out.printf(
        "Account budget proposal created: %s.%n", response.getResult().getResourceName());
  }
}AddAccountBudgetProposal.java

#C

public void Run(GoogleAdsClient client, long customerId, long billingSetupId)
{
    // Get the AccountBudgetProposalServiceClient.
    AccountBudgetProposalServiceClient proposalService =
        client.GetService(Services.V25.AccountBudgetProposalService);

    // Create an AccountBudgetProposal. The proposal will be reviewed offline by Google Ads,
    // and if approved will become an AccountBudget.
    AccountBudgetProposal proposal = new AccountBudgetProposal()
    {
        BillingSetup = ResourceNames.BillingSetup(customerId, billingSetupId),
        ProposalType = AccountBudgetProposalType.Create,
        ProposedName = "Account Budget (example)",

        // Specify the account budget starts immediately
        ProposedStartTimeType = TimeType.Now,
        // Alternatively, you can specify a specific start time. Refer to the
        // AccountBudgetProposal resource documentation for allowed formats.
        //
        //ProposedStartDateTime = "2020-01-02 03:04:05",

        // Specify that the budget runs forever.
        ProposedEndTimeType = TimeType.Forever,
        // Alternatively you can specify a specific end time. Allowed formats are as above.
        //ProposedEndDateTime = "2021-02-03 04:05:06",

        // Optional: set notes for the budget. These are free text and do not effect budget
        // delivery.
        //ProposedNotes = "Received prepayment of $0.01",

        // Set the spending limit to 0.01, measured in the Google Ads account currency.
        ProposedSpendingLimitMicros = 10_000

        // Optional: set PO number for record keeping. This value is at the user's
        // discretion, and has no effect on Google Billing & Payments.
        //ProposedPurchaseOrderNumber = "PO number 12345"
    };

    // Create an operation which will add the new AccountBudgetProposal
    AccountBudgetProposalOperation operation = new AccountBudgetProposalOperation()
    {
        Create = proposal
    };

    try
    {
        // Send the request to the Account Budget Proposal Service.
        MutateAccountBudgetProposalResponse response = proposalService.
            MutateAccountBudgetProposal(customerId.ToString(), operation);

        // Display the results.
        Console.WriteLine($"Account budget proposal '{response.Result.ResourceName}' " +
            "was created.");
    }
    catch (GoogleAdsException e)
    {
        Console.WriteLine("Failure:");
        Console.WriteLine($"Message: {e.Message}");
        Console.WriteLine($"Failure: {e.Failure}");
        Console.WriteLine($"Request ID: {e.RequestId}");
        throw;
    }
}AddAccountBudgetProposal.cs

PHP

public static function runExample(
    GoogleAdsClient $googleAdsClient,
    int $customerId,
    int $billingSetupId
) {
    // Constructs an account budget proposal.
    $accountBudgetProposal = new AccountBudgetProposal([
        'billing_setup' => ResourceNames::forBillingSetup($customerId, $billingSetupId),
        'proposal_type' => AccountBudgetProposalType::CREATE,
        'proposed_name' => 'Account Budget (example)',
        // Specifies the account budget starts immediately.
        'proposed_start_time_type' => TimeType::NOW,
        // Alternatively you can specify a specific start time. Refer to the
        // AccountBudgetProposal class for allowed formats.
        //
        // 'proposed_start_date_time' => '2020-01-02 03:04:05',

        // Specify that the budget runs forever.
        'proposed_end_time_type' => TimeType::FOREVER,
        // Alternatively you can specify a specific end time. Allowed formats are as above.
        // 'proposed_end_date_time' => '2021-02-03 04:05:06',

        // Optional: set notes for the budget. These are free text and do not effect budget
        // delivery.
        // 'proposed_notes' => 'Received prepayment of $0.01',

        // Optional: set PO number for record keeping. This value is at the user's
        // discretion, and has no effect on Google Billing & Payments.
        // 'proposed_purchase_order_number' => 'PO number 12345',

        // Set the spending limit to 0.01, measured in the Google Ads account currency.
        'proposed_spending_limit_micros' => 10000
    ]);

    $accountBudgetProposalOperation = new AccountBudgetProposalOperation();
    $accountBudgetProposalOperation->setCreate($accountBudgetProposal);

    // Issues a mutate request to add the account budget proposal.
    $accountBudgetProposalServiceClient =
        $googleAdsClient->getAccountBudgetProposalServiceClient();
    $response = $accountBudgetProposalServiceClient->mutateAccountBudgetProposal(
        MutateAccountBudgetProposalRequest::build($customerId, $accountBudgetProposalOperation)
    );

    printf(
        "Added an account budget proposal with resource name '%s'.%s",
        $response->getResult()->getResourceName(),
        PHP_EOL
    );
}AddAccountBudgetProposal.php

Python

def main(client: GoogleAdsClient, customer_id: str, billing_setup_id: str):
    account_budget_proposal_service = client.get_service(
        "AccountBudgetProposalService"
    )
    billing_setup_service = client.get_service("BillingSetupService")

    account_budget_proposal_operation = client.get_type(
        "AccountBudgetProposalOperation"
    )
    proposal = account_budget_proposal_operation.create

    proposal.proposal_type = client.enums.AccountBudgetProposalTypeEnum.CREATE
    proposal.billing_setup = billing_setup_service.billing_setup_path(
        customer_id, billing_setup_id
    )
    proposal.proposed_name = "Account Budget Proposal (example)"

    # Specify the account budget starts immediately
    proposal.proposed_start_time_type = client.enums.TimeTypeEnum.NOW
    # Alternatively you can specify a specific start time. Refer to the
    # AccountBudgetProposal resource documentation for allowed formats.
    #
    # proposal.proposed_start_date_time = '2020-01-02 03:04:05'

    # Specify that the budget runs forever
    proposal.proposed_end_time_type = client.enums.TimeTypeEnum.FOREVER
    # Alternatively you can specify a specific end time. Allowed formats are as
    # above.
    #
    # proposal.proposed_end_date_time = '2021-01-02 03:04:05'

    # Optional: set notes for the budget. These are free text and do not effect
    # budget delivery.
    #
    # proposal.proposed_notes = 'Received prepayment of $0.01'
    proposal.proposed_spending_limit_micros = 10000

    account_budget_proposal_response = (
        account_budget_proposal_service.mutate_account_budget_proposal(
            customer_id=customer_id,
            operation=account_budget_proposal_operation,
        )
    )
    print(
        "Created account budget proposal "
        f'"{account_budget_proposal_response.result.resource_name}".'
    )add_account_budget_proposal.py

Ruby

def add_account_budget_proposal(customer_id, billing_setup_id)
  # GoogleAdsClient will read a config file from
  # ENV['HOME']/google_ads_config.rb when called without parameters
  client = Google::Ads::GoogleAds::GoogleAdsClient.new


  operation = client.operation.create_resource.account_budget_proposal do |proposal|
    proposal.billing_setup = client.path.billing_setup(customer_id, billing_setup_id)
    proposal.proposal_type = :CREATE
    proposal.proposed_name = 'Account Budget (example)'

    # Specify the account budget starts immediately
    proposal.proposed_start_time_type = :NOW
    # Alternatively you can specify a specific start time. Refer to the
    # AccountBudgetProposal resource documentation for allowed formats.
    #
    # proposal.proposed_start_date_time = '2020-01-02 03:04:05'

    # Specify that the budget runs forever.
    proposal.proposed_end_time_type = :FOREVER
    # Alternatively you can specify a specific end time. Allowed formats are as
    # above.
    #
    # proposal.proposed_end_date_time = '2021-01-02 03:04:05'

    # Optional: set notes for the budget. These are free text and do not affect
    # budget delivery.
    #
    # proposal.proposed_notes = 'Received prepayment of $0.01'

    # Set the spending limit to 0.01, measured in the Google Ads account currency.
    proposal.proposed_spending_limit_micros = 10_000
  end

  account_budget_proposal_service = client.service.account_budget_proposal
  # Add budget proposal.
  response = account_budget_proposal_service.mutate_account_budget_proposal(
    customer_id: customer_id,
    operation: operation,
  )

  puts sprintf("Created budget proposal %s.",
      response.results.first.resource_name)
endadd_account_budget_proposal.rb

Perl

sub add_account_budget_proposal {
  my ($api_client, $customer_id, $billing_setup_id) = @_;

  # Create an account budget proposal.
  my $account_budget_proposal =
    Google::Ads::GoogleAds::V25::Resources::AccountBudgetProposal->new({
      billingSetup =>
        Google::Ads::GoogleAds::V25::Utils::ResourceNames::billing_setup(
        $customer_id, $billing_setup_id
        ),
      proposalType => CREATE,
      proposedName => "Account Budget (example)",
      # Specify that the account budget starts immediately.
      proposedStartTimeType => NOW,
      # Alternatively you can specify a specific start time. Refer to the
      # AccountBudgetProposal class for allowed formats.
      #
      # proposedStartDateTime => "2020-01-02 03:04:05",

      # Specify that the account budget runs forever.
      proposedEndDateTime => FOREVER,
      # Alternatively you can specify a specific end time. Allowed formats are as below.
      # proposedEndDateTime => "2021-02-03 04:05:06",

      # Optional: set notes for the budget. These are free text and do not effect budget
      # delivery.
      # proposedNotes => "Received prepayment of $0.01",

      # Optional: set PO number for record keeping. This value is at the user's
      # discretion, and has no effect on Google Billing & Payments.
      # proposedPurchaseOrderNumber => "PO number 12345",

      # Set the spending limit to 0.01, measured in the Google Ads account currency.
      proposedSpendingLimitMicros => 10000
    });

  # Create an account budget proposal operation.
  my $account_budget_proposal_operation =
    Google::Ads::GoogleAds::V25::Services::AccountBudgetProposalService::AccountBudgetProposalOperation
    ->new({
      create => $account_budget_proposal
    });

  # Add the account budget proposal.
  my $account_budget_proposal_response =
    $api_client->AccountBudgetProposalService()->mutate({
      customerId => $customer_id,
      operation  => $account_budget_proposal_operation
    });

  printf "Created account budget proposal '%s'.\n",
    $account_budget_proposal_response->{result}{resourceName};

  return 1;
}add_account_budget_proposal.pl

curl

في طلبات اقتراحات ميزانية الحساب، يكون proposed_start_date_time و proposed_end_date_time دائمًا في المنطقة الزمنية لحساب العميل، ولا يمكنك تحديد منطقة زمنية. يتم دائمًا قياس حدّ الإنفاق المقترَح بعملة الحساب، ويجب تحديد ذلك باستخدام وحدات "ميكرو"، لذا فإنّ 1.00 دولار أمريكي = 1,000,000 ميكرو.

يمكنك اختياريًا تضمين رقم طلب شراء سيظهر بجانب هذه الرسوم في الفاتورة. ولن يؤثّر ذلك في عرض الإعلانات ضمن الميزانية.

إزالة اقتراح ميزانية حساب في انتظار المراجعة

يمكنك إزالة اقتراح ميزانية معلّق بالكامل من خلال إرسال طلب AccountBudgetProposalOperation.remove يتضمّن اسم مورد اقتراح ميزانية الحساب. ومع ذلك، يُرجى العِلم أنّه يتم عادةً تطبيق اقتراحات الميزانية في غضون دقائق.

Java

AccountBudgetProposalOperation operation = AccountBudgetProposalOperation.newBuilder()
  .setRemove(ResourceNames.accountBudgetProposal(customerId, accountBudgetProposalId))
  .build();

// Send request to Google Ads API (not shown).

AccountBudgetProposalOperation operation = new AccountBudgetProposalOperation()
{
    Remove = ResourceNames.AccountBudgetProposal(customerId, accountBudgetProposalId)
};

// Send request to Google Ads API (not shown).

PHP

$accountBudgetProposalOperation = new AccountBudgetProposalOperation();
$accountBudgetProposalOperation->setRemove(ResourceNames::forAccountBudgetProposal($customerId, $accountBudgetProposalId));

// Send request to Google Ads API (not shown).

Python

account_budget_proposal_service = client.get_service('AccountBudgetProposalService')
account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation')
account_budget_proposal_operation.remove = (
    account_budget_proposal_service.account_budget_proposal_path(
        customer_id, account_budget_proposal_id
    )
)

# Send request to Google Ads API (not shown).

Ruby

operation = client.operation.remove_resource.account_budget_proposal(client.path.account_budget_proposal(customer_id, account_budget_proposal_id))

# Send request to Google Ads API (not shown).

Perl

my $account_budget_proposal_operation =
  Google::Ads::GoogleAds::V25::Services::AccountBudgetProposalService::AccountBudgetProposalOperation
    ->new({
      remove => Google::Ads::GoogleAds::V25::Utils::ResourceNames::account_budget_proposal(
          $customer_id, $account_budget_proposal_id
        )
    });

# Send request to Google Ads API (not shown).

إذا أخطأت في الاقتراح الأصلي، يمكنك إعادة إرساله كعملية UPDATE. راجِع مقالة تعديل ميزانية حساب حالية.

استرداد ميزانيات الحساب الحالية

يجلب طلب البحث التالي في "لغة طلبات البحث في إعلانات Google" (GAQL) جميع ميزانيات الحسابات الحالية في حساب معيّن:

SELECT
  account_budget.resource_name,
  account_budget.id,
  account_budget.name,
  account_budget.status,
  account_budget.billing_setup,
  account_budget.approved_spending_limit_micros,
  account_budget.approved_spending_limit_type,
  account_budget.proposed_spending_limit_micros,
  account_budget.proposed_spending_limit_type,
  account_budget.adjusted_spending_limit_micros,
  account_budget.adjusted_spending_limit_type,
  account_budget.approved_start_date_time,
  account_budget.proposed_start_date_time,
  account_budget.approved_end_date_time,
  account_budget.approved_end_time_type,
  account_budget.proposed_end_date_time,
  account_budget.proposed_end_time_type
FROM
  account_budget

تحتوي الحقول التي تتضمّن وقت بدء ميزانية الحساب ووقت انتهائها وحد الإنفاق على عدة صيغ تتضمّن بادئات مثل proposed وapproved تتيح مقارنة القيم المقترَحة في البداية بالقيم التي تمت الموافقة عليها. يحتوي حدّ الإنفاق على حقول إضافية تتضمّن البادئة adjusted للإشارة إلى حدّ الإنفاق الحالي الساري بعد تطبيق أي تعديلات على المبلغ الموافق عليه.

يمكن تعديل حد الإنفاق الموافق عليه لميزانية الحساب بمرور الوقت ليعكس أرصدة مختلفة، مثل العرض الزائد للميزانية ونشاط النقرات غير الصالحة والقسائم الترويجية. يمكنك الاطّلاع على مزيد من المعلومات حول ميزانيات الحسابات واعتمادات الحسابات والتسويات في مركز مساعدة "إعلانات Google".

سيتم أيضًا ملء أي ميزانيات حساب جديدة في انتظار الموافقة، بالإضافة إلى أي ميزانيات حساب حالية في انتظار التعديلات، في الرسالة المتداخلة pending_proposal، والتي يمكن اختيار حقولها الفرعية في طلب بحث GAQL (مثل account_budget_proposal، الذي يتم طلبه كـ account_budget.pending_proposal.account_budget_proposal، لاسم المورد الخاص بالكائن AccountBudgetProposal المرتبط).

إدارة ميزانيات الحساب الحالية

بعد إنشاء ميزانية حساب لأحد العملاء، يمكنك استخدام الرمز AccountBudgetProposalService لإدارة مَعلمات الميزانية. إنّ عمليات الإدارة الأكثر شيوعًا هي تعديل الحقلَين proposed_spending_limit_micros وproposed_end_date_time. للاطّلاع على قائمة كاملة بالحقول القابلة للتعديل، يُرجى الرجوع إلى مستندات AccountBudgetProposal المرجعية.

يمكنك تعديل ميزانية حساب حالية أو إنشاء ميزانية جديدة تمامًا، وكلاهما موضّح هنا.

تعديل ميزانية حساب حالية

يمكنك تعديل حقول ميزانية الحساب الحالية من خلال إرسال عناصر AccountBudgetProposal مع ضبط AccountBudgetProposalType على UPDATE. يُرجى العِلم أنّه يجب أيضًا تحديد الحقول التي يتم تعديلها في وسيطة update_mask للعملية.

يوضّح المقتطف التالي كيفية تعديل حد الإنفاق المقترَح لميزانية حساب حالية.

Java

AccountBudgetProposal proposal = AccountBudgetProposal.newBuilder()
  .setProposalType(AccountBudgetProposalType.UPDATE)
  .setAccountBudget(accountBudget.getResourceName())
  .setProposedSpendingLimitMicros(
    accountBudget.getProposedSpendingLimitMicros() + increaseAmount)
  .build();

AccountBudgetProposalOperation operation = AccountBudgetProposalOperation.newBuilder()
  .setCreate(proposal)
  .setUpdateMask(
      FieldMask.newBuilder().addAllPaths(Arrays.asList("proposed_spending_limit_micros")).build())
  .build();

// Send request to Google Ads API (not shown).

AccountBudgetProposal proposal = new AccountBudgetProposal()
{
  ProposalType = AccountBudgetProposalType.Update,
  AccountBudget = accountBudget.ResourceName,
  ProposedSpendingLimitMicros = accountBudget.ProposedSpendingLimitMicros + increaseAmount
};

AccountBudgetProposalOperation operation = new AccountBudgetProposalOperation()
{
  Create = proposal,
  UpdateMask = new FieldMask()
  {
    Paths = { "proposed_spending_limit_micros" }
  }
};

// Send request to Google Ads API (not shown).

PHP

$accountBudgetProposal = new AccountBudgetProposal([
  'proposal_type' => AccountBudgetProposalType::UPDATE,
  'account_budget' => $accountBudget->getResourceName(),
  'proposed_spending_limit_micros' =>
    $accountBudget->getProposedSpendingLimitMicros() + $increaseAmount
]);

$accountBudgetProposalOperation = new AccountBudgetProposalOperation();
$accountBudgetProposalOperation->setCreate($accountBudgetProposal);
$accountBudgetProposalOperation->setUpdateMask(
  FieldMasks::allSetFieldsOf($accountBudgetProposal)
);

// Send request to Google Ads API (not shown).

Python

account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation')

proposal = account_budget_proposal_operation.create
proposal.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').AccountBudgetProposalType.UPDATE
proposal.account_budget = account_budget.resource_name
proposal.proposed_spending_limit_micros = account_budget.proposed_spending_limit_micros + increase_amount

field_mask = protobuf_helpers.field_mask(None, proposal._pb)
account_budget_proposal_operation.update_mask.CopyFrom(field_mask)

# Send request to Google Ads API (not shown).

Ruby

proposal = client.resource.account_budget_proposal
proposal.proposal_type = :UPDATE

mask = client.field_mask.with proposal do
  proposal.account_budget = account_budget.resource_name
  proposal.proposed_spending_limit_micros = account_budget.proposed_spending_limit_micros + increase_amount
end

operation = client.operation.account_budget_proposal do |op|
  op.create = proposal
  op.update_mask = mask
end

# Send request to Google Ads API (not shown).

Perl

my $account_budget_proposal =
  Google::Ads::GoogleAds::V25::Resources::AccountBudgetProposal->new({
    proposalType => UPDATE,
    accountBudget => $account_budget->{resourceName},
    proposedSpendingLimitMicros => $account_budget->{proposedSpendingLimitMicros} + $increaseAmount});

my $account_budget_proposal_operation =
  Google::Ads::GoogleAds::V25::Services::AccountBudgetProposalService::AccountBudgetProposalOperation
    ->new({
      create => $account_budget_proposal,
      updateMask => all_set_fields_of($account_budget_proposal)});

# Send request to Google Ads API (not shown).

ربط ميزانيات الحسابات

كبديل لتعديل الميزانية الحالية، تتيح لك "إعلانات Google" ربط ميزانيات حسابات متعدّدة لتنفيذها بالتتابع. في المثال التالي، يضع العميل حدودًا مختلفة للإنفاق كل شهر.

مخطّط يوضّح سلسلة من ميزانيات الحسابات مع حدود إنفاق مختلفة كل شهر — مثال على ربط ميزانيات الحسابات

ويمكن تحقيق ذلك من خلال إنشاء ثلاثة عناصر AccountBudgetProposal وإرسال كل AccountBudgetProposalOperation إلى AccountBudgetProposalService في طلب MutateAccountBudgetProposal منفصل (لأنّ MutateAccountBudgetProposalRequest يقبل operation واحدًا فقط لكل مكالمة).

يوضّح المقتطف التالي كيفية إنشاء سلسلة من هذا النوع باستخدام إعدادات فوترة حالية.

Java

AccountBudgetProposal proposalMay = AccountBudgetProposal.newBuilder()
  .setBillingSetup(ResourceNames.billingSetup(customerId, billingSetupId))
  .setProposalType(AccountBudgetProposalType.CREATE)
  .setProposedName("May budget")
  .setProposedStartDateTime("2027-05-01 00:00:00")
  .setProposedEndDateTime("2027-06-01 00:00:00")
  .setProposedSpendingLimitMicros(1_000_000_000L)
  .build();

AccountBudgetProposalOperation operationMay = AccountBudgetProposalOperation.newBuilder()
  .setCreate(proposalMay)
  .build();

AccountBudgetProposal proposalJune = AccountBudgetProposal.newBuilder()
  .setBillingSetup(ResourceNames.billingSetup(customerId, billingSetupId))
  .setProposalType(AccountBudgetProposalType.CREATE)
  .setProposedName("June budget")
  .setProposedStartDateTime("2027-06-01 00:00:00")
  .setProposedEndDateTime("2027-07-01 00:00:00")
  .setProposedSpendingLimitMicros(5_000_000_000L)
  .build();

AccountBudgetProposalOperation operationJune = AccountBudgetProposalOperation.newBuilder()
  .setCreate(proposalJune)
  .build();

AccountBudgetProposal proposalJuly = AccountBudgetProposal.newBuilder()
  .setBillingSetup(ResourceNames.billingSetup(customerId, billingSetupId))
  .setProposalType(AccountBudgetProposalType.CREATE)
  .setProposedName("July budget")
  .setProposedStartDateTime("2027-07-01 00:00:00")
  .setProposedEndDateTime("2027-08-01 00:00:00")
  .setProposedSpendingLimitMicros(1_000_000_000L)
  .build();

AccountBudgetProposalOperation operationJuly = AccountBudgetProposalOperation.newBuilder()
  .setCreate(proposalJuly)
  .build();

// Send requests to Google Ads API, one MutateAccountBudgetProposal call per operation (not shown).

AccountBudgetProposal proposalMay = new AccountBudgetProposal()
{
  BillingSetup = ResourceNames.BillingSetup(customerId, billingSetupId),
  ProposalType = AccountBudgetProposalType.Create,
  ProposedName = "May budget",
  ProposedStartDateTime = "2027-05-01 00:00:00",
  ProposedEndDateTime = "2027-06-01 00:00:00",
  ProposedSpendingLimitMicros = 1_000_000_000
};

AccountBudgetProposalOperation operationMay = new AccountBudgetProposalOperation()
{
  Create = proposalMay
};

AccountBudgetProposal proposalJune = new AccountBudgetProposal()
{
  BillingSetup = ResourceNames.BillingSetup(customerId, billingSetupId),
  ProposalType = AccountBudgetProposalType.Create,
  ProposedName = "June budget",
  ProposedStartDateTime = "2027-06-01 00:00:00",
  ProposedEndDateTime = "2027-07-01 00:00:00",
  ProposedSpendingLimitMicros = 5_000_000_000
};

AccountBudgetProposalOperation operationJune = new AccountBudgetProposalOperation()
{
  Create = proposalJune
};

AccountBudgetProposal proposalJuly = new AccountBudgetProposal()
{
  BillingSetup = ResourceNames.BillingSetup(customerId, billingSetupId),
  ProposalType = AccountBudgetProposalType.Create,
  ProposedName = "July budget",
  ProposedStartDateTime = "2027-07-01 00:00:00",
  ProposedEndDateTime = "2027-08-01 00:00:00",
  ProposedSpendingLimitMicros = 1_000_000_000
};

AccountBudgetProposalOperation operationJuly = new AccountBudgetProposalOperation()
{
  Create = proposalJuly
};

// Send requests to Google Ads API, one MutateAccountBudgetProposal call per operation (not shown).

PHP

$proposalMay = new AccountBudgetProposal([
  'billing_setup' => ResourceNames::forBillingSetup($customerId, $billingSetupId),
  'proposal_type' => AccountBudgetProposalType::CREATE,
  'proposed_name' => 'May budget',
  'proposed_start_date_time' => '2027-05-01 00:00:00',
  'proposed_end_date_time' => '2027-06-01 00:00:00',
  'proposed_spending_limit_micros' => 1000000000
]);
$operationMay = new AccountBudgetProposalOperation();
$operationMay->setCreate($proposalMay);

$proposalJune = new AccountBudgetProposal([
  'billing_setup' => ResourceNames::forBillingSetup($customerId, $billingSetupId),
  'proposal_type' => AccountBudgetProposalType::CREATE,
  'proposed_name' => 'June budget',
  'proposed_start_date_time' => '2027-06-01 00:00:00',
  'proposed_end_date_time' => '2027-07-01 00:00:00',
  'proposed_spending_limit_micros' => 5000000000
]);
$operationJune = new AccountBudgetProposalOperation();
$operationJune->setCreate($proposalJune);

$proposalJuly = new AccountBudgetProposal([
  'billing_setup' => ResourceNames::forBillingSetup($customerId, $billingSetupId),
  'proposal_type' => AccountBudgetProposalType::CREATE,
  'proposed_name' => 'July budget',
  'proposed_start_date_time' => '2027-07-01 00:00:00',
  'proposed_end_date_time' => '2027-08-01 00:00:00',
  'proposed_spending_limit_micros' => 1000000000
]);
$operationJuly = new AccountBudgetProposalOperation();
$operationJuly->setCreate($proposalJuly);

// Send requests to Google Ads API, one MutateAccountBudgetProposal call per operation (not shown).

Python

billing_setup_service = client.get_service('BillingSetupService')

may_account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation')
proposal_may = may_account_budget_proposal_operation.create
proposal_may.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').AccountBudgetProposalType.CREATE
proposal_may.billing_setup = billing_setup_service.billing_setup_path(customer_id, billing_setup_id)
proposal_may.proposed_name = 'May budget'
proposal_may.proposed_start_date_time = '2027-05-01 00:00:00'
proposal_may.proposed_end_date_time = '2027-06-01 00:00:00'
proposal_may.proposed_spending_limit_micros = 1000000000

june_account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation')
proposal_june = june_account_budget_proposal_operation.create
proposal_june.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').AccountBudgetProposalType.CREATE
proposal_june.billing_setup = billing_setup_service.billing_setup_path(customer_id, billing_setup_id)
proposal_june.proposed_name = 'June budget'
proposal_june.proposed_start_date_time = '2027-06-01 00:00:00'
proposal_june.proposed_end_date_time = '2027-07-01 00:00:00'
proposal_june.proposed_spending_limit_micros = 5000000000

july_account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation')
proposal_july = july_account_budget_proposal_operation.create
proposal_july.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').AccountBudgetProposalType.CREATE
proposal_july.billing_setup = billing_setup_service.billing_setup_path(customer_id, billing_setup_id)
proposal_july.proposed_name = 'July budget'
proposal_july.proposed_start_date_time = '2027-07-01 00:00:00'
proposal_july.proposed_end_date_time = '2027-08-01 00:00:00'
proposal_july.proposed_spending_limit_micros = 1000000000

# Send requests to Google Ads API, one MutateAccountBudgetProposal call per operation (not shown).

Ruby

operation_may = client.operation.create_resource.account_budget_proposal do |proposal|
  proposal.billing_setup = client.path.billing_setup(customer_id, billing_setup_id)
  proposal.proposal_type = :CREATE
  proposal.proposed_name = 'May budget'
  proposal.proposed_start_date_time = '2027-05-01 00:00:00'
  proposal.proposed_end_date_time = '2027-06-01 00:00:00'
  proposal.proposed_spending_limit_micros = 1_000_000_000
end

operation_june = client.operation.create_resource.account_budget_proposal do |proposal|
  proposal.billing_setup = client.path.billing_setup(customer_id, billing_setup_id)
  proposal.proposal_type = :CREATE
  proposal.proposed_name = 'June budget'
  proposal.proposed_start_date_time = '2027-06-01 00:00:00'
  proposal.proposed_end_date_time = '2027-07-01 00:00:00'
  proposal.proposed_spending_limit_micros = 5_000_000_000
end

operation_july = client.operation.create_resource.account_budget_proposal do |proposal|
  proposal.billing_setup = client.path.billing_setup(customer_id, billing_setup_id)
  proposal.proposal_type = :CREATE
  proposal.proposed_name = 'July budget'
  proposal.proposed_start_date_time = '2027-07-01 00:00:00'
  proposal.proposed_end_date_time = '2027-08-01 00:00:00'
  proposal.proposed_spending_limit_micros = 1_000_000_000
end

# Send requests to Google Ads API, one MutateAccountBudgetProposal call per operation (not shown).

Perl

my $may_proposal =
  Google::Ads::GoogleAds::V25::Resources::AccountBudgetProposal->new({
    billingSetup =>
      Google::Ads::GoogleAds::V25::Utils::ResourceNames::billing_setup(
      $customer_id, $billing_setup_id
      ),
    proposalType => CREATE,
    proposedName => "May budget",
    proposedStartDateTime => "2027-05-01 00:00:00",
    proposedEndDateTime => "2027-06-01 00:00:00",
    proposedSpendingLimitMicros => 1000000000
  });
my $may_operation =
  Google::Ads::GoogleAds::V25::Services::AccountBudgetProposalService::AccountBudgetProposalOperation
    ->new({create => $may_proposal});

my $june_proposal =
  Google::Ads::GoogleAds::V25::Resources::AccountBudgetProposal->new({
    billingSetup =>
      Google::Ads::GoogleAds::V25::Utils::ResourceNames::billing_setup(
      $customer_id, $billing_setup_id
      ),
    proposalType => CREATE,
    proposedName => "June budget",
    proposedStartDateTime => "2027-06-01 00:00:00",
    proposedEndDateTime => "2027-07-01 00:00:00",
    proposedSpendingLimitMicros => 5000000000
  });
my $june_operation =
  Google::Ads::GoogleAds::V25::Services::AccountBudgetProposalService::AccountBudgetProposalOperation
    ->new({create => $june_proposal});

my $july_proposal =
  Google::Ads::GoogleAds::V25::Resources::AccountBudgetProposal->new({
    billingSetup =>
      Google::Ads::GoogleAds::V25::Utils::ResourceNames::billing_setup(
      $customer_id, $billing_setup_id
      ),
    proposalType => CREATE,
    proposedName => "July budget",
    proposedStartDateTime => "2027-07-01 00:00:00",
    proposedEndDateTime => "2027-08-01 00:00:00",
    proposedSpendingLimitMicros => 1000000000
  });
my $july_operation =
  Google::Ads::GoogleAds::V25::Services::AccountBudgetProposalService::AccountBudgetProposalOperation
    ->new({create => $july_proposal});

# Send requests to Google Ads API, one MutateAccountBudgetProposal call per operation (not shown).

لاحظ استخدام AccountBudgetProposalType.CREATE في كل اقتراح. سيؤدي ذلك إلى إنشاء ثلاث ميزانيات منفصلة، بدلاً من تعديل الميزانية نفسها ثلاث مرات.

إنهاء ميزانيات الحساب

يمكن إنهاء ميزانيات الحسابات أثناء نشاطها، وإزالتها بالكامل قبل بدءها أو أثناء انتظار الموافقة عليها.

إنهاء ميزانية الحساب النشط

لا يمكن إزالة ميزانية الحساب النشط. ومع ذلك، يمكنك ضبط وقت الانتهاء على الوقت الحالي. أبسط طريقة لتحقيق ذلك هي إرسال اقتراح يتضمّن AccountBudgetProposalType.END.

يوضّح المقتطف التالي كيفية إنهاء ميزانية حساب حالية.

Java

AccountBudgetProposal proposal = AccountBudgetProposal.newBuilder()
  .setProposalType(AccountBudgetProposalType.END)
  .setAccountBudget(accountBudget.getResourceName())
  .build();

AccountBudgetProposalOperation operation = AccountBudgetProposalOperation.newBuilder()
  .setCreate(proposal)
  .build();

// Send request to Google Ads API (not shown).

AccountBudgetProposal proposal = new AccountBudgetProposal()
{
  ProposalType = AccountBudgetProposalType.End,
  AccountBudget = accountBudget.ResourceName
};

AccountBudgetProposalOperation operation = new AccountBudgetProposalOperation()
{
  Create = proposal
};

// Send request to Google Ads API (not shown).

PHP

$accountBudgetProposal = new AccountBudgetProposal([
  'proposal_type' => AccountBudgetProposalType::END,
  'account_budget' => $accountBudget->getResourceName()
]);

$accountBudgetProposalOperation = new AccountBudgetProposalOperation();
$accountBudgetProposalOperation->setCreate($accountBudgetProposal);

// Send request to Google Ads API (not shown).

Python

account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation')
proposal = account_budget_proposal_operation.create
proposal.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').AccountBudgetProposalType.END
proposal.account_budget = account_budget.resource_name

# Send request to Google Ads API (not shown).

Ruby

operation = client.operation.create_resource.account_budget_proposal do |proposal|
  proposal.proposal_type = :END
  proposal.account_budget = account_budget.resource_name
end

# Send request to Google Ads API (not shown).

Perl

my $account_budget_proposal =
  Google::Ads::GoogleAds::V25::Resources::AccountBudgetProposal->new({
    proposalType => END,
    accountBudget => $account_budget->{resourceName}
  });

my $account_budget_proposal_operation =
  Google::Ads::GoogleAds::V25::Services::AccountBudgetProposalService::AccountBudgetProposalOperation
    ->new({create => $account_budget_proposal});

# Send request to Google Ads API (not shown).

ويعادل ذلك تعديل ميزانية الحساب من خلال ضبط وقت تاريخ الانتهاء على TimeType.NOW.

إزالة ميزانية حساب تمت الموافقة عليها قبل وقت بدئها

إذا اقترحت ميزانية حساب لبدء استخدامها في المستقبل، يمكنك إزالتها بالكامل قبل وقت البدء عن طريق إرسال AccountBudgetProposalType.REMOVE من نوع اقتراح.

يوضّح المقتطف التالي كيفية إزالة ميزانية حساب مستقبلي حالية.

Java

AccountBudgetProposal proposal = AccountBudgetProposal.newBuilder()
  .setProposalType(AccountBudgetProposalType.REMOVE)
  .setAccountBudget(accountBudget.getResourceName())
  .build();

AccountBudgetProposalOperation operation = AccountBudgetProposalOperation.newBuilder()
  .setCreate(proposal)
  .build();

// Send request to Google Ads API (not shown).

AccountBudgetProposal proposal = new AccountBudgetProposal()
{
  ProposalType = AccountBudgetProposalType.Remove,
  AccountBudget = accountBudget.ResourceName
};

AccountBudgetProposalOperation operation = new AccountBudgetProposalOperation()
{
  Create = proposal
};

// Send request to Google Ads API (not shown).

PHP

$accountBudgetProposal = new AccountBudgetProposal([
  'proposal_type' => AccountBudgetProposalType::REMOVE,
  'account_budget' => $accountBudget->getResourceName()
]);

$accountBudgetProposalOperation = new AccountBudgetProposalOperation();
$accountBudgetProposalOperation->setCreate($accountBudgetProposal);

// Send request to Google Ads API (not shown).

Python

account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation')
proposal = account_budget_proposal_operation.create
proposal.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').AccountBudgetProposalType.REMOVE
proposal.account_budget = account_budget.resource_name

# Send request to Google Ads API (not shown).

Ruby

operation = client.operation.create_resource.account_budget_proposal do |proposal|
  proposal.proposal_type = :REMOVE
  proposal.account_budget = account_budget.resource_name
end

# Send request to Google Ads API (not shown).

Perl

my $account_budget_proposal =
  Google::Ads::GoogleAds::V25::Resources::AccountBudgetProposal->new({
    proposalType => REMOVE,
    accountBudget => $account_budget->{resourceName}
  });

my $account_budget_proposal_operation =
  Google::Ads::GoogleAds::V25::Services::AccountBudgetProposalService::AccountBudgetProposalOperation
    ->new({create => $account_budget_proposal});

# Send request to Google Ads API (not shown).

إعداد الفوترة

فاتورة

ميزانيات الحساب تنظيم صفحاتك في مجموعات يمكنك حفظ المحتوى وتصنيفه حسب إعداداتك المفضّلة.

إنشاء اقتراح ميزانية حساب

جافا

#C

PHP

Python

Ruby

Perl

curl

إزالة اقتراح ميزانية حساب في انتظار المراجعة

استرداد ميزانيات الحساب الحالية

إدارة ميزانيات الحساب الحالية

تعديل ميزانية حساب حالية

ربط ميزانيات الحسابات

إنهاء ميزانيات الحساب

إنهاء ميزانية الحساب النشط

إزالة ميزانية حساب تمت الموافقة عليها قبل وقت بدئها

ميزانيات الحساب