Ngân sách tài khoản kiểm soát những khoản tiền mà một tài khoản có thể chi tiêu trong một khoảng thời gian cụ thể
bằng cách xác định các thuộc tính ngân sách như hạn mức chi tiêu, thời gian bắt đầu và thời gian kết thúc. Các tài khoản đó phải trỏ đến một trong các thông tin thanh toán của tài khoản để cho biết tài khoản thanh toán cụ thể nào sẽ được tính phí. Bạn có thể tạo, cập nhật và xoá AccountBudget
bằng cách gửi các đối tượng AccountBudgetProposal
.
Các đối tượng AccountBudget
biểu thị kết quả cuối cùng của việc áp dụng đề xuất. Sau khi một đề xuất được phê duyệt, các thay đổi của đề xuất đó (tuỳ thuộc vào mọi mức điều chỉnh) sẽ dẫn đến việc tạo ngân sách tài khoản mới hoặc cập nhật ngân sách hiện có. Điều này phụ thuộc vào proposal_type
được chỉ định trong yêu cầu.
AccountBudgetProposalType |
Nội dung mô tả |
---|---|
CREATE |
Tạo ngân sách tài khoản mới. Ngân sách này phải được phê duyệt trước khi sử dụng. |
UPDATE |
Sửa đổi ngân sách tài khoản hiện tại. |
END |
Đặt thời gian kết thúc của ngân sách tài khoản thành thời gian hiện tại. |
REMOVE |
Xoá ngân sách tài khoản trước thời gian bắt đầu. |
Các phần dưới đây mô tả hành vi của từng loại đề xuất.
Tạo đề xuất ngân sách tài khoản
Việc tạo ngân sách tài khoản mới cho phép bạn kiểm soát hành vi chi tiêu của khách hàng. Sử dụng AccountBudgetProposalService
để tạo AccountBudgetProposal
mới. Bạn nên đặt
proposal_type
thành
CREATE
để chỉ định việc tạo ngân sách mới. Hãy tham khảo mục quản lý của hướng dẫn này để biết các thao tác khác.
Hãy nhớ sử dụng thông tin thanh toán bằng tài khoản thanh toán mà bạn có quyền ghi. Hãy tham khảo hướng dẫn thiết lập thông tin thanh toán để biết thông tin chi tiết.
Ví dụ sau đây minh hoạ cách tạo đề xuất ngân sách mới.
Java
private void runExample(GoogleAdsClient googleAdsClient, long customerId, long billingSetupId) { // Creates an AccountBudgetProposal. This will be reviewed offline by Google Ads, and if // approved will become an AccountBudget. AccountBudgetProposal proposal = AccountBudgetProposal.newBuilder() .setBillingSetup(ResourceNames.billingSetup(customerId, billingSetupId)) .setProposalType(AccountBudgetProposalType.CREATE) .setProposedName("Account Budget (example)") // Specifies the account budget starts immediately. .setProposedStartTimeType(TimeType.NOW) // Alternatively you can specify a specific start time. Refer to the // AccountBudgetProposal // resource documentation for allowed formats. // // .setProposedStartDateTime("2020-01-02 03:04:05") // Specifies that the budget runs forever. .setProposedEndTimeType(TimeType.FOREVER) // Alternatively you can specify a specific end time. Allowed formats are as above. // .setProposedEndDateTime("2021-02-03 04:05:06") // Optional: sets notes for the budget. These are free text and do not effect budget // delivery. // .setProposedNotes("Received prepayment of $0.01") // Sets the spending limit to 0.01, measured in the Google Ads account currency. .setProposedSpendingLimitMicros(10_000) // Optional: sets PO number for record keeping. This value is at the user's // discretion, and has no effect on Google Billing & Payments. // .setProposedPurchaseOrderNumber("PO number 12345") .build(); // Creates an operation which will add the new AccountBudgetProposal. AccountBudgetProposalOperation operation = AccountBudgetProposalOperation.newBuilder().setCreate(proposal).build(); try (AccountBudgetProposalServiceClient accountBudgetProposalServiceClient = googleAdsClient.getLatestVersion().createAccountBudgetProposalServiceClient()) { // Sends the request to the Account Budget Proposal Service. MutateAccountBudgetProposalResponse response = accountBudgetProposalServiceClient.mutateAccountBudgetProposal( String.valueOf(customerId), operation); System.out.printf( "Account budget proposal created: %s.%n", response.getResult().getResourceName()); } }
C#
public void Run(GoogleAdsClient client, long customerId, long billingSetupId) { // Get the AccountBudgetProposalServiceClient. AccountBudgetProposalServiceClient proposalService = client.GetService(Services.V17.AccountBudgetProposalService); // Create an AccountBudgetProposal. The proposal will be reviewed offline by Google Ads, // and if approved will become an AccountBudget. AccountBudgetProposal proposal = new AccountBudgetProposal() { BillingSetup = ResourceNames.BillingSetup(customerId, billingSetupId), ProposalType = AccountBudgetProposalType.Create, ProposedName = "Account Budget (example)", // Specify the account budget starts immediately ProposedStartTimeType = TimeType.Now, // Alternatively, you can specify a specific start time. Refer to the // AccountBudgetProposal resource documentation for allowed formats. // //ProposedStartDateTime = "2020-01-02 03:04:05", // Specify that the budget runs forever. ProposedEndTimeType = TimeType.Forever, // Alternatively you can specify a specific end time. Allowed formats are as above. //ProposedEndDateTime = "2021-02-03 04:05:06", // Optional: set notes for the budget. These are free text and do not effect budget // delivery. //ProposedNotes = "Received prepayment of $0.01", // Set the spending limit to 0.01, measured in the Google Ads account currency. ProposedSpendingLimitMicros = 10_000 // Optional: set PO number for record keeping. This value is at the user's // discretion, and has no effect on Google Billing & Payments. //ProposedPurchaseOrderNumber = "PO number 12345" }; // Create an operation which will add the new AccountBudgetProposal AccountBudgetProposalOperation operation = new AccountBudgetProposalOperation() { Create = proposal }; try { // Send the request to the Account Budget Proposal Service. MutateAccountBudgetProposalResponse response = proposalService. MutateAccountBudgetProposal(customerId.ToString(), operation); // Display the results. Console.WriteLine($"Account budget proposal '{response.Result.ResourceName}' " + "was created."); } catch (GoogleAdsException e) { Console.WriteLine("Failure:"); Console.WriteLine($"Message: {e.Message}"); Console.WriteLine($"Failure: {e.Failure}"); Console.WriteLine($"Request ID: {e.RequestId}"); throw; } }
1.199
public static function runExample( GoogleAdsClient $googleAdsClient, int $customerId, int $billingSetupId ) { // Constructs an account budget proposal. $accountBudgetProposal = new AccountBudgetProposal([ 'billing_setup' => ResourceNames::forBillingSetup($customerId, $billingSetupId), 'proposal_type' => AccountBudgetProposalType::CREATE, 'proposed_name' => 'Account Budget (example)', // Specifies the account budget starts immediately. 'proposed_start_time_type' => TimeType::NOW, // Alternatively you can specify a specific start time. Refer to the // AccountBudgetProposal class for allowed formats. // // 'proposed_start_date_time' => '2020-01-02 03:04:05', // Specify that the budget runs forever. 'proposed_end_time_type' => TimeType::FOREVER, // Alternatively you can specify a specific end time. Allowed formats are as above. // 'proposed_end_date_time' => '2021-02-03 04:05:06', // Optional: set notes for the budget. These are free text and do not effect budget // delivery. // 'proposed_notes' => 'Received prepayment of $0.01', // Optional: set PO number for record keeping. This value is at the user's // discretion, and has no effect on Google Billing & Payments. // 'proposed_purchase_order_number' => 'PO number 12345', // Set the spending limit to 0.01, measured in the Google Ads account currency. 'proposed_spending_limit_micros' => 10000 ]); $accountBudgetProposalOperation = new AccountBudgetProposalOperation(); $accountBudgetProposalOperation->setCreate($accountBudgetProposal); // Issues a mutate request to add the account budget proposal. $accountBudgetProposalServiceClient = $googleAdsClient->getAccountBudgetProposalServiceClient(); $response = $accountBudgetProposalServiceClient->mutateAccountBudgetProposal( MutateAccountBudgetProposalRequest::build($customerId, $accountBudgetProposalOperation) ); printf( "Added an account budget proposal with resource name '%s'.%s", $response->getResult()->getResourceName(), PHP_EOL ); }
Python
def main(client, customer_id, billing_setup_id): account_budget_proposal_service = client.get_service( "AccountBudgetProposalService" ) billing_setup_service = client.get_service("BillingSetupService") account_budget_proposal_operation = client.get_type( "AccountBudgetProposalOperation" ) proposal = account_budget_proposal_operation.create proposal.proposal_type = client.enums.AccountBudgetProposalTypeEnum.CREATE proposal.billing_setup = billing_setup_service.billing_setup_path( customer_id, billing_setup_id ) proposal.proposed_name = "Account Budget Proposal (example)" # Specify the account budget starts immediately proposal.proposed_start_time_type = client.enums.TimeTypeEnum.NOW # Alternatively you can specify a specific start time. Refer to the # AccountBudgetProposal resource documentation for allowed formats. # # proposal.proposed_start_date_time = '2020-01-02 03:04:05' # Specify that the budget runs forever proposal.proposed_end_time_type = client.enums.TimeTypeEnum.FOREVER # Alternatively you can specify a specific end time. Allowed formats are as # above. # # proposal.proposed_end_date_time = '2021-01-02 03:04:05' # Optional: set notes for the budget. These are free text and do not effect # budget delivery. # # proposal.proposed_notes = 'Received prepayment of $0.01' proposal.proposed_spending_limit_micros = 10000 account_budget_proposal_response = ( account_budget_proposal_service.mutate_account_budget_proposal( customer_id=customer_id, operation=account_budget_proposal_operation, ) ) print( "Created account budget proposal " f'"{account_budget_proposal_response.result.resource_name}".' )
Ruby
def add_account_budget_proposal(customer_id, billing_setup_id) # GoogleAdsClient will read a config file from # ENV['HOME']/google_ads_config.rb when called without parameters client = Google::Ads::GoogleAds::GoogleAdsClient.new operation = client.operation.create_resource.account_budget_proposal do |proposal| proposal.billing_setup = client.path.billing_setup(customer_id, billing_setup_id) proposal.proposal_type = :CREATE proposal.proposed_name = 'Account Budget (example)' # Specify the account budget starts immediately proposal.proposed_start_time_type = :NOW # Alternatively you can specify a specific start time. Refer to the # AccountBudgetProposal resource documentation for allowed formats. # # proposal.proposed_start_date_time = '2020-01-02 03:04:05' # Specify that the budget runs forever. proposal.proposed_end_time_type = :FOREVER # Alternatively you can specify a specific end time. Allowed formats are as # above. # # proposal.proposed_end_date_time = '2021-01-02 03:04:05' # Optional: set notes for the budget. These are free text and do not affect # budget delivery. # # proposal.proposed_notes = 'Received prepayment of $0.01' # Set the spending limit to 0.01, measured in the Google Ads account currency. proposal.proposed_spending_limit_micros = 10_000 end account_budget_proposal_service = client.service.account_budget_proposal # Add budget proposal. response = account_budget_proposal_service.mutate_account_budget_proposal( customer_id: customer_id, operation: operation, ) puts sprintf("Created budget proposal %s.", response.results.first.resource_name) end
Perl
sub add_account_budget_proposal { my ($api_client, $customer_id, $billing_setup_id) = @_; # Create an account budget proposal. my $account_budget_proposal = Google::Ads::GoogleAds::V17::Resources::AccountBudgetProposal->new({ billingSetup => Google::Ads::GoogleAds::V17::Utils::ResourceNames::billing_setup( $customer_id, $billing_setup_id ), proposalType => CREATE, proposedName => "Account Budget (example)", # Specify that the account budget starts immediately. proposedStartTimeType => NOW, # Alternatively you can specify a specific start time. Refer to the # AccountBudgetProposal class for allowed formats. # # proposedStartDateTime => "2020-01-02 03:04:05", # Specify that the account budget runs forever. proposedEndDateTime => FOREVER, # Alternatively you can specify a specific end time. Allowed formats are as below. # proposedEndDateTime => "2021-02-03 04:05:06", # Optional: set notes for the budget. These are free text and do not effect budget # delivery. # proposedNotes => "Received prepayment of $0.01", # Optional: set PO number for record keeping. This value is at the user's # discretion, and has no effect on Google Billing & Payments. # proposedPurchaseOrderNumber => "PO number 12345", # Set the spending limit to 0.01, measured in the Google Ads account currency. proposedSpendingLimitMicros => 10000 }); # Create an account budget proposal operation. my $account_budget_proposal_operation = Google::Ads::GoogleAds::V17::Services::AccountBudgetProposalService::AccountBudgetProposalOperation ->new({ create => $account_budget_proposal }); # Add the account budget proposal. my $account_budget_proposal_response = $api_client->AccountBudgetProposalService()->mutate({ customerId => $customer_id, operation => $account_budget_proposal_operation }); printf "Created account budget proposal '%s'.\n", $account_budget_proposal_response->{result}{resourceName}; return 1; }
Trong yêu cầu đề xuất ngân sách tài khoản,
proposed_start_date_time
và
proposed_end_date_time
luôn nằm trong múi giờ tài khoản của khách hàng; bạn không thể chỉ định múi giờ. Giới hạn chi tiêu được đề xuất luôn được đo lường bằng đơn vị tiền tệ của tài khoản; hãy chỉ định giới hạn này bằng đơn vị "vi" để 1 đô la = 1.000.000 micro giây.
Nếu muốn, bạn có thể thêm số Đơn đặt hàng. Số này sẽ hiển thị bên cạnh các khoản phí này trên hoá đơn. Điều này không ảnh hưởng đến việc phân phối ngân sách.
Xóa đề xuất ngân sách tài khoản đang chờ xử lý
Bạn có thể xoá toàn bộ đề xuất ngân sách đang chờ xử lý bằng cách gửi yêu cầu
AccountBudgetProposalOperation Remove
kèm theo tên tài nguyên đề xuất ngân sách tài khoản. Tuy nhiên, xin lưu ý rằng đề xuất ngân sách thường được áp dụng trong vòng vài phút.
AccountBudgetProposalOperation operation = AccountBudgetProposalOperation.newBuilder() .setRemove(StringValue.of(ResourceNames.accountBudgetProposal(customerId, accountBudgetProposalId))) .build(); // Send request to Google Ads API (not shown).
AccountBudgetProposalOperation operation = new AccountBudgetProposalOperation() { Remove = ResourceNames.AccountBudgetProposal(customerId, accountBudgetProposalId) }; // Send request to Google Ads API (not shown).
$accountBudgetProposalOperation = new AccountBudgetProposalOperation(); $accountBudgetProposalOperation->setRemove(ResourceNames::forAccountBudgetProposal($customerId, $accountBudgetProposalId)); // Send request to Google Ads API (not shown).
account_budget_proposal_service = client.get_service('AccountBudgetProposalService') account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation') proposal = account_budget_proposal_operation.remove proposal.resource_name = account_budget_proposal_service.account_budget_proposal_path(customer_id, account_budget_proposal_id): # Send request to Google Ads API (not shown).
operation = client.operation.remove_resource.account_budget_proposal(client.path.account_budget_proposal(customer_id, account_budget_proposal_id)) # Send request to Google Ads API (not shown).
my $account_budget_proposal_operation = Google::Ads::GoogleAds::V17::Services::AccountBudgetProposalService::AccountBudgetProposalOperation ->new({ remove => Google::Ads::GoogleAds::V17::Utils::ResourceNames::billing_setup( $customer_id, $account_budget_proposal_id ) }); # Send request to Google Ads API (not shown).
Nếu mắc lỗi với đề xuất ban đầu, bạn có thể gửi lại đề xuất dưới dạng thao tác UPDATE
. Hãy tham khảo mục Quản lý ngân sách tài khoản hiện tại bên dưới để biết thêm thông tin.
Truy xuất ngân sách tài khoản hiện tại
Truy vấn GAQL sau đây tìm nạp tất cả ngân sách tài khoản hiện tại trong một tài khoản:
SELECT
account_budget.status,
account_budget.billing_setup,
account_budget.approved_spending_limit_micros,
account_budget.approved_spending_limit_type,
account_budget.proposed_spending_limit_micros,
account_budget.proposed_spending_limit_type,
account_budget.adjusted_spending_limit_micros,
account_budget.adjusted_spending_limit_type,
account_budget.approved_start_date_time,
account_budget.proposed_start_date_time,
account_budget.approved_end_date_time,
account_budget.approved_end_time_type,
account_budget.proposed_end_date_time,
account_budget.proposed_end_time_type
FROM
account_budget
Xin lưu ý rằng các trường đóng gói thời gian bắt đầu, thời gian kết thúc và giới hạn chi tiêu của ngân sách tài khoản có nhiều biến thể với các tiền tố như proposed
và approved
, cho phép so sánh các giá trị được đề xuất ban đầu với các giá trị đã được phê duyệt. Hạn mức chi tiêu có các trường bổ sung có tiền tố
adjusted
để cho biết hạn mức chi tiêu hiện tại có hiệu lực sau khi
áp dụng mọi mức điều chỉnh cho số tiền đã phê duyệt.
Bạn có thể điều chỉnh hạn mức chi tiêu được phê duyệt của ngân sách tài khoản theo thời gian để phản ánh nhiều khoản tín dụng cho những vấn đề như phân phối quá ngân sách, hoạt động nhấp chuột không hợp lệ và phiếu giảm giá khuyến mãi. Bạn có thể tìm thêm thông tin về ngân sách tài khoản, tín dụng và điều chỉnh tài khoản trên Trung tâm trợ giúp của Google Ads.
Mọi ngân sách tài khoản mới đang chờ phê duyệt, cùng với mọi ngân sách tài khoản
hiện có đang chờ cập nhật, đều sẽ chứa
trường pending_proposal
mà bạn có thể chọn. Tệp này sẽ chứa mã nhận dạng tài nguyên của đối tượng AccountBudgetProposal
được liên kết.
Ví dụ về mã
Thư mục Billing
của mỗi thư viện ứng dụng chứa một đoạn mã mẫu cho thấy một yêu cầu đầy đủ:
Quản lý ngân sách tài khoản hiện tại
Sau khi tạo ngân sách tài khoản cho khách hàng, bạn có thể sử dụng AccountBudgetProposalService
để quản lý các thông số ngân sách. Các thao tác quản lý phổ biến nhất là cập nhật các trường spending_limit
và end_date_time
. Để xem danh sách đầy đủ các trường có thể thay đổi, hãy tham khảo tài liệu về AccountBudgetProposal
.
Bạn có thể chọn cập nhật ngân sách tài khoản hiện tại hoặc tạo ngân sách hoàn toàn mới, cả hai đều hiển thị ở đây.
Cập nhật ngân sách tài khoản hiện tại
Bạn có thể cập nhật các trường ngân sách tài khoản hiện có bằng cách gửi đối tượng
AccountBudgetProposal
khi
AccountBudgetProposalType
được đặt thành UPDATE
. Xin lưu ý rằng bạn cũng phải cho biết các trường đang được cập nhật trong đối số UpdateMask
của thao tác.
Đoạn mã sau đây minh hoạ cách cập nhật hạn mức chi tiêu đề xuất cho ngân sách tài khoản hiện có.
AccountBudgetProposal proposal = AccountBudgetProposal.newBuilder() .setProposalType(AccountBudgetProposalType.UPDATE) .setAccountBudget(accountBudget.getResourceName()) .setProposedSpendingLimitMicros( accountBudget.getProposedSpendingLimitMicros().getValue() + increaseAmount) .build(); AccountBudgetProposalOperation operation = AccountBudgetProposalOperation.newBuilder() .setCreate(proposal) .setUpdateMask( FieldMask.newBuilder().addAllPaths(Arrays.asList("proposed_spending_limit")).build()) .build(); // Send request to Google Ads API (not shown).
AccountBudgetProposal proposal = new AccountBudgetProposal() { ProposalType = AccountBudgetProposalType.Update, AccountBudget = accountBudget.ResourceName, ProposedSpendingLimitMicros = accountBudget.ProposedSpendingLimitMicros + increaseAmount }; AccountBudgetProposalOperation operation = new AccountBudgetProposalOperation() { Create = proposal, UpdateMask = new FieldMask() { Paths = { "proposed_spending_limit" } } }; // Send request to Google Ads API (not shown).
$accountBudgetProposal = new AccountBudgetProposal([ 'proposal_type' => AccountBudgetProposalType::UPDATE, 'account_budget' => $accountBudget->getResourceName(), 'proposed_spending_limit_micros' => $accountBudget->getProposedSpendingLimitMicros() + $increaseAmount]) $accountBudgetProposalOperation = new AccountBudgetProposalOperation(); $accountBudgetProposalOperation->setCreate($accountBudgetProposal); $accountBudgetProposalOperation->setUpdateMask( FieldMasks::allSetFieldsOf($accountBudgetProposal) ); // Send request to Google Ads API (not shown).
account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation') proposal = account_budget_proposal_operation.create proposal.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').UPDATE proposal.account_budget = account_budget proposal.proposed_spending_limit_micros = account_budget.proposed_spending_limit_micros + increase_amount field_mask = protobuf_helpers.field_mask(None, proposal) account_budget_proposal_operation.update_mask.CopyFrom(field_mask) # Send request to Google Ads API (not shown).
proposal = client.resource.account_budget_proposal proposal.proposal_type = :UPDATE mask = client.field_mask.with proposal do proposal.account_budget = account_budget.resource_name proposal.proposed_spending_limit_micros = account_budget.proposed_spending_limit_micros + increase_amount end operation = client.operation.account_budget_proposal do |op| op.create = proposal op.update_mask = mask end # Send request to Google Ads API (not shown).
my $account_budget_proposal = Google::Ads::GoogleAds::V17::Resources::AccountBudgetProposal->new({ proposalType => UPDATE, accountBudget => $account_budget->{resourceName}, proposedSpendingLimitMicros => $account_budget->{proposedSpendingLimitMicros} + $increaseAmount}); my $account_budget_proposal_operation = Google::Ads::GoogleAds::V17::Services::AccountBudgetProposalService::AccountBudgetProposalOperation ->new({ create => $account_budget_proposal, updateMask => all_set_fields_of($account_budget_proposal)}); # Send request to Google Ads API (not shown).
Tạo chuỗi ngân sách tài khoản
Thay vì cập nhật ngân sách hiện tại, Google Ads cho phép bạn xâu chuỗi nhiều ngân sách tài khoản để chạy liên tiếp. Trong ví dụ sau, một khách hàng có các hạn mức chi tiêu khác nhau mỗi tháng.
Bạn có thể thực hiện việc này bằng cách tạo 3 đối tượng AccountBudgetProposal
và gửi các đối tượng đó đến AccountBudgetProposalService
.
Đoạn mã dưới đây minh hoạ cách tạo chuỗi như vậy bằng thông tin thanh toán hiện có.
AccountBudgetProposal proposalMay = AccountBudgetProposal.newBuilder() .setBillingSetup(ResourceNames.billingSetup(customerId, billingSetupId)) .setProposalType(AccountBudgetProposalType.CREATE) .setProposedName("May budget") .setProposedStartDateTime("2018-05-01") .setProposedEndDateTime("2018-06-01") .setProposedSpendingLimitMicros(1_000_000_000L) .build(); AccountBudgetProposal proposalJune = AccountBudgetProposal.newBuilder() .setBillingSetup(ResourceNames.billingSetup(customerId, billingSetupId)) .setProposalType(AccountBudgetProposalType.CREATE) .setProposedName("June budget") .setProposedStartDateTime("2018-06-01") .setProposedEndDateTime("2018-07-01") .setProposedSpendingLimitMicros(5_000_000_000L) .build(); AccountBudgetProposal proposalJuly = AccountBudgetProposal.newBuilder() .setBillingSetup(ResourceNames.billingSetup(customerId, billingSetupId)) .setProposalType(AccountBudgetProposalType.CREATE) .setProposedName("July budget") .setProposedStartDateTime("2018-07-01") .setProposedEndDateTime("2018-08-01") .setProposedSpendingLimitMicros(1_000_000_000L) .build(); // Send request to Google Ads API (not shown).
AccountBudgetProposal proposalMay = new AccountBudgetProposal() { BillingSetup = ResourceNames.BillingSetup(customerId, billingSetupId), ProposalType = AccountBudgetProposalType.Create, ProposedName = "May budget", ProposedStartDateTime = "2018-05-01", ProposedEndDateTime = "2018-06-01", ProposedSpendingLimitMicros = 1_000_000_000 } AccountBudgetProposal proposalJune = new AccountBudgetProposal() { BillingSetup = ResourceNames.BillingSetup(customerId, billingSetupId), ProposalType = AccountBudgetProposalType.Create, ProposedName = "June budget", ProposedStartDateTime = "2018-06-01", ProposedEndDateTime = "2018-07-01", ProposedSpendingLimitMicros = 5_000_000_000 } AccountBudgetProposal proposalJuly = new AccountBudgetProposal() { BillingSetup = ResourceNames.BillingSetup(customerId, billingSetupId), ProposalType = AccountBudgetProposalType.Create, ProposedName = "July budget", ProposedStartDateTime = "2018-07-01", ProposedEndDateTime = "2018-08-01", ProposedSpendingLimitMicros = 1_000_000_000 } // Send request to Google Ads API (not shown).
$proposalMay = new AccountBudgetProposal([ 'billing_setup' => ResourceNames::forBillingSetup($customerId, $billingSetupId), 'proposal_type' => AccountBudgetProposalType::CREATE, 'proposed_name' => 'May budget', 'proposed_start_date_time' => '2018-05-01', 'proposed_end_date_time' => '2018-06-01', 'proposed_spending_limit_micros' => 1000000000 ]); $proposalJune = new AccountBudgetProposal([ 'billing_setup' => ResourceNames::forBillingSetup($customerId, $billingSetupId), 'proposal_type' => AccountBudgetProposalType::CREATE, 'proposed_name' => 'June budget', 'proposed_start_date_time' => '2018-06-01', 'proposed_end_date_time' => '2018-07-01', 'proposed_spending_limit_micros' => 5000000000 ]); $proposalJuly = new AccountBudgetProposal([ 'billing_setup' => ResourceNames::forBillingSetup($customerId, $billingSetupId), 'proposal_type' => AccountBudgetProposalType::CREATE, 'proposed_name' => 'July budget', 'proposed_start_date_time' => '2018-07-01', 'proposed_end_date_time' => '2018-08-01', 'proposed_spending_limit_micros' => 1000000000 ]); // Send request to Google Ads API (not shown).
may_account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation') proposalMay = may_account_budget_proposal_operation.create proposalMay.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').CREATE proposalMay.billing_setup = billing_setup_service.billing_setup_path(customer_id, billing_setup_id) proposalMay.proposed_name = 'May budget' proposalMay.proposed_start_date_time = '2018-05-01' proposalMay.proposed_end_date_time = '2018-06-01' proposalMay.proposed_spending_limit_micros = 1000000000 june_account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation') proposalJune = may_account_budget_proposal_operation.create proposalJune.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').CREATE proposalJune.billing_setup = billing_setup_service.billing_setup_path(customer_id, billing_setup_id) proposalJune.proposed_name = 'June budget' proposalJune.proposed_start_date_time = '2018-06-01' proposalJune.proposed_end_date_time = '2018-07-01' proposalJune.proposed_spending_limit_micros = 5000000000 july_account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation') proposalJuly = may_account_budget_proposal_operation.create proposalJuly.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').CREATE proposalJuly.billing_setup = billing_setup_service.billing_setup_path(customer_id, billing_setup_id) proposalJuly.proposed_name = 'July budget' proposalJuly.proposed_start_date_time = '2018-07-01' proposalJuly.proposed_end_date_time = '2018-08-01' proposalJuly.proposed_spending_limit_micros = 1000000000 # Send request to Google Ads API (not shown).
proposal_may = client.operation.create_resource.account_budget_proposal do |proposal| proposal.billing_setup = client.path.billing_setup(customer_id, billing_setup_id) proposal.proposal_type = :CREATE proposal.proposed_name = 'May budget' proposal.proposed_start_date_time = '2018-05-01' proposal.proposed_end_date_time = '2018-06-01' proposal.proposed_spending_limit_micros = 1_000_000_000 end proposal_june = client.operation.create_resource.account_budget_proposal do |proposal| proposal.billing_setup = client.path.billing_setup(customer_id, billing_setup_id) proposal.proposal_type = :CREATE proposal.proposed_name = 'June budget' proposal.proposed_start_date_time = '2018-06-01' proposal.proposed_end_date_time = '2018-07-01' proposal.proposed_spending_limit_micros = 5_000_000_000 end proposal_july = client.operation.create_resource.account_budget_proposal do |proposal| proposal.billing_setup = client.path.billing_setup(customer_id, billing_setup_id) proposal.proposal_type = :CREATE proposal.proposed_name = 'July budget' proposal.proposed_start_date_time = '2018-07-01' proposal.proposed_end_date_time = '2018-08-01' proposal.proposed_spending_limit_micros = 1_000_000_000 end # Send request to Google Ads API (not shown).
my $may_proposal = Google::Ads::GoogleAds::V17::Resources::AccountBudgetProposal->new({ billingSetup => Google::Ads::GoogleAds::V17::Utils::ResourceNames::billing_setup( $customer_id, $billing_setup_id ), proposalType => CREATE, proposedName => "May budget", proposedStartDateTime => "2018-05-01", proposedEndDateTime => "2018-06-01", proposedSpendingLimitMicros => 1000000000 }); my $june_proposal = Google::Ads::GoogleAds::V17::Resources::AccountBudgetProposal->new({ billingSetup => Google::Ads::GoogleAds::V17::Utils::ResourceNames::billing_setup( $customer_id, $billing_setup_id ), proposalType => CREATE, proposedName => "June budget", proposedStartDateTime => "2018-06-01", proposedEndDateTime => "2018-07-01", proposedSpendingLimitMicros => 5000000000 }); my $july_proposal = Google::Ads::GoogleAds::V17::Resources::AccountBudgetProposal->new({ billingSetup => Google::Ads::GoogleAds::V17::Utils::ResourceNames::billing_setup( $customer_id, $billing_setup_id ), proposalType => CREATE, proposedName => "July budget", proposedStartDateTime => "2018-07-01", proposedEndDateTime => "2018-08-01", proposedSpendingLimitMicros => 1000000000 }); # Send request to Google Ads API (not shown).
Xin lưu ý cách sử dụng AccountBudgetProposalType.CREATE
trên từng đề xuất. Điều này sẽ tạo ra 3 ngân sách riêng biệt, thay vì cập nhật cùng một ngân sách ba lần.
Đang chấm dứt ngân sách tài khoản
Ngân sách tài khoản có thể được kết thúc trong khi đang hoạt động và bị xoá hoàn toàn trước khi bắt đầu hoặc trong khi chờ phê duyệt.
Kết thúc ngân sách tài khoản đang hoạt động
Không thể xóa ngân sách tài khoản đang hoạt động. Tuy nhiên, bạn có thể đặt thời gian kết thúc là thời gian hiện tại. Cách đơn giản nhất để thực hiện việc này là gửi một đề xuất bằng AccountBudgetProposalType.END
.
Đoạn mã sau đây minh hoạ cách kết thúc ngân sách tài khoản hiện tại.
AccountBudgetProposal.newBuilder() .setProposalType(AccountBudgetProposalType.END) .setAccountBudget(accountBudget.getResourceName()) .build(); // Send request to Google Ads API (not shown).
AccountBudgetProposal proposal = new AccountBudgetProposal() { ProposalType = AccountBudgetProposalType.End, AccountBudget = accountBudget.ResourceName }; // Send request to Google Ads API (not shown).
$accountBudgetProposal = new AccountBudgetProposal([ 'proposal_type' => AccountBudgetProposalType::END, 'account_budget' => $accountBudget->getResourceName() ]) // Send request to Google Ads API (not shown).
account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation') proposal = account_budget_proposal_operation.create proposal.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').END proposal.account_budget = account_budget # Send request to Google Ads API (not shown).
proposal = client.resource.account_budget_proposal proposal.proposal_type = :END proposal.account_budget = account_budget.resource_name # Send request to Google Ads API (not shown).
my $account_budget_proposal = Google::Ads::GoogleAds::V17::Resources::AccountBudgetProposal->new({ proposalType => END, accountBudget => $account_budget->{resourceName}); # Send request to Google Ads API (not shown).
Việc này tương đương với việc đặt thời gian cập nhật ngân sách tài khoản bằng cách đặt thời gian ngày kết thúc thành TimeType.NOW
.
Xoá ngân sách tài khoản đã được phê duyệt trước thời gian bắt đầu
Nếu đề xuất ngân sách tài khoản để bắt đầu trong tương lai, bạn có thể xoá hoàn toàn ngân sách này trước thời gian bắt đầu bằng cách gửi loại đề xuất AccountBudgetProposalType.REMOVE
.
Đoạn mã sau đây minh hoạ việc xoá một ngân sách tài khoản hiện có trong tương lai.
AccountBudgetProposal.newBuilder() .setProposalType(AccountBudgetProposalType.REMOVE) .setAccountBudget(accountBudget.getResourceName()) .build(); // Send request to Google Ads API (not shown).
AccountBudgetProposal proposal = new AccountBudgetProposal() { ProposalType = AccountBudgetProposalType.Remove, AccountBudget = accountBudget.ResourceName }; // Send request to Google Ads API (not shown).
$accountBudgetProposal = new AccountBudgetProposal([ 'proposal_type' => AccountBudgetProposalType::REMOVE, 'account_budget' => $accountBudget->getResourceName() ]) // Send request to Google Ads API (not shown).
account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation') proposal = account_budget_proposal_operation.create proposal.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').REMOVE proposal.account_budget = account_budget # Send request to Google Ads API (not shown).
proposal = client.resource.account_budget_proposal proposal.proposal_type = :REMOVE proposal.account_budget = account_budget.resource_name # Send request to Google Ads API (not shown).
my $account_budget_proposal = Google::Ads::GoogleAds::V17::Resources::AccountBudgetProposal->new({ proposalType => REMOVE, accountBudget => $account_budget->{resourceName}); # Send request to Google Ads API (not shown).