계정 예산은 지출 한도, 시작 시간, 종료 시간과 같은 예산 속성을 정의하여 특정 기간 동안 계정에서 지출할 수 있는 금액을 관리합니다. 청구할 특정 결제 계정을 나타내기 위해 계정의 결제 설정 중 하나를 가리켜야 합니다. AccountBudgetProposal
객체를 전송하여 AccountBudget
를 생성, 업데이트, 삭제할 수 있습니다.
AccountBudget
객체는 제안서 적용의 최종 결과를 나타냅니다. 제안서가 승인되면 변경사항 (조정사항에 따라 다름)에 따라 새 계정 예산이 생성되거나 기존 예산이 업데이트됩니다. 이는 요청에 지정된 proposal_type
에 따라 다릅니다.
AccountBudgetProposalType |
설명 |
---|---|
CREATE |
새 계정 예산을 만듭니다. 이 예산은 사용하기 전에 승인되어야 합니다. |
UPDATE |
기존 계정 예산을 수정합니다. |
END |
계정 예산의 종료 시간을 현재 시간으로 설정합니다. |
REMOVE |
시작 시간 전에 계정 예산을 삭제합니다. |
아래 섹션에서는 각 제안서 유형의 동작을 설명합니다.
계정 예산 제안서 작성
새 계정 예산을 만들면 고객의 지출 동작을 관리할 수 있습니다. AccountBudgetProposalService
를 사용하여 새 AccountBudgetProposal
를 만듭니다. 새 예산을 만들어야 한다고 지정하려면 proposal_type
를 CREATE
로 설정해야 합니다. 다른 작업은 이 가이드의 관리 섹션을 참고하세요.
쓰기 액세스 권한이 있는 결제 계정과 함께 결제 설정을 사용해야 합니다. 자세한 내용은 결제 설정 가이드를 참고하세요.
다음 예는 새 예산 제안서를 만드는 방법을 보여줍니다.
자바
private void runExample(GoogleAdsClient googleAdsClient, long customerId, long billingSetupId) { // Creates an AccountBudgetProposal. This will be reviewed offline by Google Ads, and if // approved will become an AccountBudget. AccountBudgetProposal proposal = AccountBudgetProposal.newBuilder() .setBillingSetup(ResourceNames.billingSetup(customerId, billingSetupId)) .setProposalType(AccountBudgetProposalType.CREATE) .setProposedName("Account Budget (example)") // Specifies the account budget starts immediately. .setProposedStartTimeType(TimeType.NOW) // Alternatively you can specify a specific start time. Refer to the // AccountBudgetProposal // resource documentation for allowed formats. // // .setProposedStartDateTime("2020-01-02 03:04:05") // Specifies that the budget runs forever. .setProposedEndTimeType(TimeType.FOREVER) // Alternatively you can specify a specific end time. Allowed formats are as above. // .setProposedEndDateTime("2021-02-03 04:05:06") // Optional: sets notes for the budget. These are free text and do not effect budget // delivery. // .setProposedNotes("Received prepayment of $0.01") // Sets the spending limit to 0.01, measured in the Google Ads account currency. .setProposedSpendingLimitMicros(10_000) // Optional: sets PO number for record keeping. This value is at the user's // discretion, and has no effect on Google Billing & Payments. // .setProposedPurchaseOrderNumber("PO number 12345") .build(); // Creates an operation which will add the new AccountBudgetProposal. AccountBudgetProposalOperation operation = AccountBudgetProposalOperation.newBuilder().setCreate(proposal).build(); try (AccountBudgetProposalServiceClient accountBudgetProposalServiceClient = googleAdsClient.getLatestVersion().createAccountBudgetProposalServiceClient()) { // Sends the request to the Account Budget Proposal Service. MutateAccountBudgetProposalResponse response = accountBudgetProposalServiceClient.mutateAccountBudgetProposal( String.valueOf(customerId), operation); System.out.printf( "Account budget proposal created: %s.%n", response.getResult().getResourceName()); } }
C#
public void Run(GoogleAdsClient client, long customerId, long billingSetupId) { // Get the AccountBudgetProposalServiceClient. AccountBudgetProposalServiceClient proposalService = client.GetService(Services.V18.AccountBudgetProposalService); // Create an AccountBudgetProposal. The proposal will be reviewed offline by Google Ads, // and if approved will become an AccountBudget. AccountBudgetProposal proposal = new AccountBudgetProposal() { BillingSetup = ResourceNames.BillingSetup(customerId, billingSetupId), ProposalType = AccountBudgetProposalType.Create, ProposedName = "Account Budget (example)", // Specify the account budget starts immediately ProposedStartTimeType = TimeType.Now, // Alternatively, you can specify a specific start time. Refer to the // AccountBudgetProposal resource documentation for allowed formats. // //ProposedStartDateTime = "2020-01-02 03:04:05", // Specify that the budget runs forever. ProposedEndTimeType = TimeType.Forever, // Alternatively you can specify a specific end time. Allowed formats are as above. //ProposedEndDateTime = "2021-02-03 04:05:06", // Optional: set notes for the budget. These are free text and do not effect budget // delivery. //ProposedNotes = "Received prepayment of $0.01", // Set the spending limit to 0.01, measured in the Google Ads account currency. ProposedSpendingLimitMicros = 10_000 // Optional: set PO number for record keeping. This value is at the user's // discretion, and has no effect on Google Billing & Payments. //ProposedPurchaseOrderNumber = "PO number 12345" }; // Create an operation which will add the new AccountBudgetProposal AccountBudgetProposalOperation operation = new AccountBudgetProposalOperation() { Create = proposal }; try { // Send the request to the Account Budget Proposal Service. MutateAccountBudgetProposalResponse response = proposalService. MutateAccountBudgetProposal(customerId.ToString(), operation); // Display the results. Console.WriteLine($"Account budget proposal '{response.Result.ResourceName}' " + "was created."); } catch (GoogleAdsException e) { Console.WriteLine("Failure:"); Console.WriteLine($"Message: {e.Message}"); Console.WriteLine($"Failure: {e.Failure}"); Console.WriteLine($"Request ID: {e.RequestId}"); throw; } }
PHP
public static function runExample( GoogleAdsClient $googleAdsClient, int $customerId, int $billingSetupId ) { // Constructs an account budget proposal. $accountBudgetProposal = new AccountBudgetProposal([ 'billing_setup' => ResourceNames::forBillingSetup($customerId, $billingSetupId), 'proposal_type' => AccountBudgetProposalType::CREATE, 'proposed_name' => 'Account Budget (example)', // Specifies the account budget starts immediately. 'proposed_start_time_type' => TimeType::NOW, // Alternatively you can specify a specific start time. Refer to the // AccountBudgetProposal class for allowed formats. // // 'proposed_start_date_time' => '2020-01-02 03:04:05', // Specify that the budget runs forever. 'proposed_end_time_type' => TimeType::FOREVER, // Alternatively you can specify a specific end time. Allowed formats are as above. // 'proposed_end_date_time' => '2021-02-03 04:05:06', // Optional: set notes for the budget. These are free text and do not effect budget // delivery. // 'proposed_notes' => 'Received prepayment of $0.01', // Optional: set PO number for record keeping. This value is at the user's // discretion, and has no effect on Google Billing & Payments. // 'proposed_purchase_order_number' => 'PO number 12345', // Set the spending limit to 0.01, measured in the Google Ads account currency. 'proposed_spending_limit_micros' => 10000 ]); $accountBudgetProposalOperation = new AccountBudgetProposalOperation(); $accountBudgetProposalOperation->setCreate($accountBudgetProposal); // Issues a mutate request to add the account budget proposal. $accountBudgetProposalServiceClient = $googleAdsClient->getAccountBudgetProposalServiceClient(); $response = $accountBudgetProposalServiceClient->mutateAccountBudgetProposal( MutateAccountBudgetProposalRequest::build($customerId, $accountBudgetProposalOperation) ); printf( "Added an account budget proposal with resource name '%s'.%s", $response->getResult()->getResourceName(), PHP_EOL ); }
Python
def main(client, customer_id, billing_setup_id): account_budget_proposal_service = client.get_service( "AccountBudgetProposalService" ) billing_setup_service = client.get_service("BillingSetupService") account_budget_proposal_operation = client.get_type( "AccountBudgetProposalOperation" ) proposal = account_budget_proposal_operation.create proposal.proposal_type = client.enums.AccountBudgetProposalTypeEnum.CREATE proposal.billing_setup = billing_setup_service.billing_setup_path( customer_id, billing_setup_id ) proposal.proposed_name = "Account Budget Proposal (example)" # Specify the account budget starts immediately proposal.proposed_start_time_type = client.enums.TimeTypeEnum.NOW # Alternatively you can specify a specific start time. Refer to the # AccountBudgetProposal resource documentation for allowed formats. # # proposal.proposed_start_date_time = '2020-01-02 03:04:05' # Specify that the budget runs forever proposal.proposed_end_time_type = client.enums.TimeTypeEnum.FOREVER # Alternatively you can specify a specific end time. Allowed formats are as # above. # # proposal.proposed_end_date_time = '2021-01-02 03:04:05' # Optional: set notes for the budget. These are free text and do not effect # budget delivery. # # proposal.proposed_notes = 'Received prepayment of $0.01' proposal.proposed_spending_limit_micros = 10000 account_budget_proposal_response = ( account_budget_proposal_service.mutate_account_budget_proposal( customer_id=customer_id, operation=account_budget_proposal_operation, ) ) print( "Created account budget proposal " f'"{account_budget_proposal_response.result.resource_name}".' )
Ruby
def add_account_budget_proposal(customer_id, billing_setup_id) # GoogleAdsClient will read a config file from # ENV['HOME']/google_ads_config.rb when called without parameters client = Google::Ads::GoogleAds::GoogleAdsClient.new operation = client.operation.create_resource.account_budget_proposal do |proposal| proposal.billing_setup = client.path.billing_setup(customer_id, billing_setup_id) proposal.proposal_type = :CREATE proposal.proposed_name = 'Account Budget (example)' # Specify the account budget starts immediately proposal.proposed_start_time_type = :NOW # Alternatively you can specify a specific start time. Refer to the # AccountBudgetProposal resource documentation for allowed formats. # # proposal.proposed_start_date_time = '2020-01-02 03:04:05' # Specify that the budget runs forever. proposal.proposed_end_time_type = :FOREVER # Alternatively you can specify a specific end time. Allowed formats are as # above. # # proposal.proposed_end_date_time = '2021-01-02 03:04:05' # Optional: set notes for the budget. These are free text and do not affect # budget delivery. # # proposal.proposed_notes = 'Received prepayment of $0.01' # Set the spending limit to 0.01, measured in the Google Ads account currency. proposal.proposed_spending_limit_micros = 10_000 end account_budget_proposal_service = client.service.account_budget_proposal # Add budget proposal. response = account_budget_proposal_service.mutate_account_budget_proposal( customer_id: customer_id, operation: operation, ) puts sprintf("Created budget proposal %s.", response.results.first.resource_name) end
Perl
sub add_account_budget_proposal { my ($api_client, $customer_id, $billing_setup_id) = @_; # Create an account budget proposal. my $account_budget_proposal = Google::Ads::GoogleAds::V18::Resources::AccountBudgetProposal->new({ billingSetup => Google::Ads::GoogleAds::V18::Utils::ResourceNames::billing_setup( $customer_id, $billing_setup_id ), proposalType => CREATE, proposedName => "Account Budget (example)", # Specify that the account budget starts immediately. proposedStartTimeType => NOW, # Alternatively you can specify a specific start time. Refer to the # AccountBudgetProposal class for allowed formats. # # proposedStartDateTime => "2020-01-02 03:04:05", # Specify that the account budget runs forever. proposedEndDateTime => FOREVER, # Alternatively you can specify a specific end time. Allowed formats are as below. # proposedEndDateTime => "2021-02-03 04:05:06", # Optional: set notes for the budget. These are free text and do not effect budget # delivery. # proposedNotes => "Received prepayment of $0.01", # Optional: set PO number for record keeping. This value is at the user's # discretion, and has no effect on Google Billing & Payments. # proposedPurchaseOrderNumber => "PO number 12345", # Set the spending limit to 0.01, measured in the Google Ads account currency. proposedSpendingLimitMicros => 10000 }); # Create an account budget proposal operation. my $account_budget_proposal_operation = Google::Ads::GoogleAds::V18::Services::AccountBudgetProposalService::AccountBudgetProposalOperation ->new({ create => $account_budget_proposal }); # Add the account budget proposal. my $account_budget_proposal_response = $api_client->AccountBudgetProposalService()->mutate({ customerId => $customer_id, operation => $account_budget_proposal_operation }); printf "Created account budget proposal '%s'.\n", $account_budget_proposal_response->{result}{resourceName}; return 1; }
계정 예산 제안 요청에서 proposed_start_date_time
및 proposed_end_date_time
는 항상 고객의 계정 시간대로 표시되며 시간대를 지정할 수 없습니다.
제안된 지출 한도는 항상 계정의 통화로 측정됩니다. '마이크로' 단위를 사용하여 지정합니다. 즉, 1.00달러 = 1,000,000마이크로입니다.
원하는 경우 인보이스에서 청구 내역 옆에 표시할 구매주문서 번호를 포함할 수 있습니다. 이는 예산 전송에는 영향을 미치지 않습니다.
대기 중인 계정 예산 제안 삭제
계정 예산 제안서 리소스 이름과 함께 AccountBudgetProposalOperation Remove
요청을 전송하여 대기 중인 예산 제안서 전체를 삭제할 수 있습니다. 하지만 예산 제안서는 일반적으로 몇 분 이내에 적용됩니다.
AccountBudgetProposalOperation operation = AccountBudgetProposalOperation.newBuilder() .setRemove(StringValue.of(ResourceNames.accountBudgetProposal(customerId, accountBudgetProposalId))) .build(); // Send request to Google Ads API (not shown).
AccountBudgetProposalOperation operation = new AccountBudgetProposalOperation() { Remove = ResourceNames.AccountBudgetProposal(customerId, accountBudgetProposalId) }; // Send request to Google Ads API (not shown).
$accountBudgetProposalOperation = new AccountBudgetProposalOperation(); $accountBudgetProposalOperation->setRemove(ResourceNames::forAccountBudgetProposal($customerId, $accountBudgetProposalId)); // Send request to Google Ads API (not shown).
account_budget_proposal_service = client.get_service('AccountBudgetProposalService') account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation') proposal = account_budget_proposal_operation.remove proposal.resource_name = account_budget_proposal_service.account_budget_proposal_path(customer_id, account_budget_proposal_id): # Send request to Google Ads API (not shown).
operation = client.operation.remove_resource.account_budget_proposal(client.path.account_budget_proposal(customer_id, account_budget_proposal_id))
# Send request to Google Ads API (not shown).
my $account_budget_proposal_operation = Google::Ads::GoogleAds::V18::Services::AccountBudgetProposalService::AccountBudgetProposalOperation ->new({ remove => Google::Ads::GoogleAds::V18::Utils::ResourceNames::billing_setup( $customer_id, $account_budget_proposal_id ) }); # Send request to Google Ads API (not shown).
원래 제안서에 실수가 있는 경우 제안서를 UPDATE
작업으로 다시 제출할 수 있습니다. 기존 계정 예산 업데이트를 참고하세요.
기존 계정 예산 검색
다음 GAQL 쿼리는 계정의 기존 계정 예산을 모두 가져옵니다.
SELECT
account_budget.status,
account_budget.billing_setup,
account_budget.approved_spending_limit_micros,
account_budget.approved_spending_limit_type,
account_budget.proposed_spending_limit_micros,
account_budget.proposed_spending_limit_type,
account_budget.adjusted_spending_limit_micros,
account_budget.adjusted_spending_limit_type,
account_budget.approved_start_date_time,
account_budget.proposed_start_date_time,
account_budget.approved_end_date_time,
account_budget.approved_end_time_type,
account_budget.proposed_end_date_time,
account_budget.proposed_end_time_type
FROM
account_budget
계정 예산의 시작 시간, 종료 시간, 지출 한도를 캡슐화하는 필드에는 proposed
및 approved
와 같은 접두사가 있는 여러 변형이 있으며, 이를 통해 처음 제안된 값과 승인된 값을 비교할 수 있습니다. 지출 한도에는 승인된 금액에 조정이 적용된 후 현재 적용 중인 지출 한도를 나타내는 adjusted
접두사가 있는 추가 필드가 있습니다.
계정 예산의 승인된 지출 한도는 예산 초과게재, 무효 클릭 활동, 프로모션 쿠폰과 같은 다양한 크레딧을 반영하도록 시간이 지남에 따라 조정될 수 있습니다. 계정 예산 및 계정 크레딧 및 조정에 관한 자세한 내용은 Google Ads 고객센터를 참고하세요.
승인 대기 중인 새 계정 예산과 업데이트 대기 중인 기존 계정 예산에는 선택할 수 있는 pending_proposal
필드도 포함됩니다. 여기에는 연결된 AccountBudgetProposal
객체의 리소스 ID가 포함됩니다.
기존 계정 예산 관리
고객의 계정 예산을 만든 후 AccountBudgetProposalService
를 사용하여 예산 매개변수를 관리할 수 있습니다. 가장 일반적인 관리 작업은 spending_limit
및 end_date_time
필드를 업데이트하는 것입니다. 변경 가능한 필드의 전체 목록은 AccountBudgetProposal
문서를 참고하세요.
기존 계정 예산을 업데이트하거나 완전히 새 예산을 만들 수 있으며, 두 가지 방법 모두 여기에 표시됩니다.
기존 계정 예산 업데이트
AccountBudgetProposalType
를 UPDATE
로 설정하여 AccountBudgetProposal
객체를 전송하여 기존 계정 예산 필드를 업데이트할 수 있습니다. 작업의 UpdateMask
인수에서 업데이트되는 필드도 표시해야 합니다.
다음 스니펫은 기존 계정 예산의 제안된 지출 한도를 업데이트하는 방법을 보여줍니다.
AccountBudgetProposal proposal = AccountBudgetProposal.newBuilder() .setProposalType(AccountBudgetProposalType.UPDATE) .setAccountBudget(accountBudget.getResourceName()) .setProposedSpendingLimitMicros( accountBudget.getProposedSpendingLimitMicros().getValue() + increaseAmount) .build(); AccountBudgetProposalOperation operation = AccountBudgetProposalOperation.newBuilder() .setCreate(proposal) .setUpdateMask( FieldMask.newBuilder().addAllPaths(Arrays.asList("proposed_spending_limit")).build()) .build(); // Send request to Google Ads API (not shown).
AccountBudgetProposal proposal = new AccountBudgetProposal() { ProposalType = AccountBudgetProposalType.Update, AccountBudget = accountBudget.ResourceName, ProposedSpendingLimitMicros = accountBudget.ProposedSpendingLimitMicros + increaseAmount }; AccountBudgetProposalOperation operation = new AccountBudgetProposalOperation() { Create = proposal, UpdateMask = new FieldMask() { Paths = { "proposed_spending_limit" } } }; // Send request to Google Ads API (not shown).
$accountBudgetProposal = new AccountBudgetProposal([ 'proposal_type' => AccountBudgetProposalType::UPDATE, 'account_budget' => $accountBudget->getResourceName(), 'proposed_spending_limit_micros' => $accountBudget->getProposedSpendingLimitMicros() + $increaseAmount]) $accountBudgetProposalOperation = new AccountBudgetProposalOperation(); $accountBudgetProposalOperation->setCreate($accountBudgetProposal); $accountBudgetProposalOperation->setUpdateMask( FieldMasks::allSetFieldsOf($accountBudgetProposal) ); // Send request to Google Ads API (not shown).
account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation') proposal = account_budget_proposal_operation.create proposal.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').UPDATE proposal.account_budget = account_budget proposal.proposed_spending_limit_micros = account_budget.proposed_spending_limit_micros + increase_amount field_mask = protobuf_helpers.field_mask(None, proposal) account_budget_proposal_operation.update_mask.CopyFrom(field_mask) # Send request to Google Ads API (not shown).
proposal = client.resource.account_budget_proposal proposal.proposal_type = :UPDATE mask = client.field_mask.with proposal do proposal.account_budget = account_budget.resource_name proposal.proposed_spending_limit_micros = account_budget.proposed_spending_limit_micros + increase_amount end operation = client.operation.account_budget_proposal do |op| op.create = proposal op.update_mask = mask end # Send request to Google Ads API (not shown).
my $account_budget_proposal = Google::Ads::GoogleAds::V18::Resources::AccountBudgetProposal->new({ proposalType => UPDATE, accountBudget => $account_budget->{resourceName}, proposedSpendingLimitMicros => $account_budget->{proposedSpendingLimitMicros} + $increaseAmount}); my $account_budget_proposal_operation = Google::Ads::GoogleAds::V18::Services::AccountBudgetProposalService::AccountBudgetProposalOperation ->new({ create => $account_budget_proposal, updateMask => all_set_fields_of($account_budget_proposal)}); # Send request to Google Ads API (not shown).
계정 예산 체이닝
기존 예산을 업데이트하는 대신 Google Ads에서 여러 계정 예산을 연결하여 연속으로 실행할 수 있습니다. 다음 예에서는 고객의 지출 한도가 매달 다릅니다.
이렇게 하려면 AccountBudgetProposal
객체 세 개를 만들고 AccountBudgetProposalService
에 전송하면 됩니다.
아래 스니펫은 기존 결제 설정을 사용하여 이러한 체인을 만드는 방법을 보여줍니다.
AccountBudgetProposal proposalMay = AccountBudgetProposal.newBuilder() .setBillingSetup(ResourceNames.billingSetup(customerId, billingSetupId)) .setProposalType(AccountBudgetProposalType.CREATE) .setProposedName("May budget") .setProposedStartDateTime("2018-05-01") .setProposedEndDateTime("2018-06-01") .setProposedSpendingLimitMicros(1_000_000_000L) .build(); AccountBudgetProposal proposalJune = AccountBudgetProposal.newBuilder() .setBillingSetup(ResourceNames.billingSetup(customerId, billingSetupId)) .setProposalType(AccountBudgetProposalType.CREATE) .setProposedName("June budget") .setProposedStartDateTime("2018-06-01") .setProposedEndDateTime("2018-07-01") .setProposedSpendingLimitMicros(5_000_000_000L) .build(); AccountBudgetProposal proposalJuly = AccountBudgetProposal.newBuilder() .setBillingSetup(ResourceNames.billingSetup(customerId, billingSetupId)) .setProposalType(AccountBudgetProposalType.CREATE) .setProposedName("July budget") .setProposedStartDateTime("2018-07-01") .setProposedEndDateTime("2018-08-01") .setProposedSpendingLimitMicros(1_000_000_000L) .build(); // Send request to Google Ads API (not shown).
AccountBudgetProposal proposalMay = new AccountBudgetProposal() { BillingSetup = ResourceNames.BillingSetup(customerId, billingSetupId), ProposalType = AccountBudgetProposalType.Create, ProposedName = "May budget", ProposedStartDateTime = "2018-05-01", ProposedEndDateTime = "2018-06-01", ProposedSpendingLimitMicros = 1_000_000_000 } AccountBudgetProposal proposalJune = new AccountBudgetProposal() { BillingSetup = ResourceNames.BillingSetup(customerId, billingSetupId), ProposalType = AccountBudgetProposalType.Create, ProposedName = "June budget", ProposedStartDateTime = "2018-06-01", ProposedEndDateTime = "2018-07-01", ProposedSpendingLimitMicros = 5_000_000_000 } AccountBudgetProposal proposalJuly = new AccountBudgetProposal() { BillingSetup = ResourceNames.BillingSetup(customerId, billingSetupId), ProposalType = AccountBudgetProposalType.Create, ProposedName = "July budget", ProposedStartDateTime = "2018-07-01", ProposedEndDateTime = "2018-08-01", ProposedSpendingLimitMicros = 1_000_000_000 } // Send request to Google Ads API (not shown).
$proposalMay = new AccountBudgetProposal([ 'billing_setup' => ResourceNames::forBillingSetup($customerId, $billingSetupId), 'proposal_type' => AccountBudgetProposalType::CREATE, 'proposed_name' => 'May budget', 'proposed_start_date_time' => '2018-05-01', 'proposed_end_date_time' => '2018-06-01', 'proposed_spending_limit_micros' => 1000000000 ]); $proposalJune = new AccountBudgetProposal([ 'billing_setup' => ResourceNames::forBillingSetup($customerId, $billingSetupId), 'proposal_type' => AccountBudgetProposalType::CREATE, 'proposed_name' => 'June budget', 'proposed_start_date_time' => '2018-06-01', 'proposed_end_date_time' => '2018-07-01', 'proposed_spending_limit_micros' => 5000000000 ]); $proposalJuly = new AccountBudgetProposal([ 'billing_setup' => ResourceNames::forBillingSetup($customerId, $billingSetupId), 'proposal_type' => AccountBudgetProposalType::CREATE, 'proposed_name' => 'July budget', 'proposed_start_date_time' => '2018-07-01', 'proposed_end_date_time' => '2018-08-01', 'proposed_spending_limit_micros' => 1000000000 ]); // Send request to Google Ads API (not shown).
may_account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation') proposalMay = may_account_budget_proposal_operation.create proposalMay.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').CREATE proposalMay.billing_setup = billing_setup_service.billing_setup_path(customer_id, billing_setup_id) proposalMay.proposed_name = 'May budget' proposalMay.proposed_start_date_time = '2018-05-01' proposalMay.proposed_end_date_time = '2018-06-01' proposalMay.proposed_spending_limit_micros = 1000000000 june_account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation') proposalJune = may_account_budget_proposal_operation.create proposalJune.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').CREATE proposalJune.billing_setup = billing_setup_service.billing_setup_path(customer_id, billing_setup_id) proposalJune.proposed_name = 'June budget' proposalJune.proposed_start_date_time = '2018-06-01' proposalJune.proposed_end_date_time = '2018-07-01' proposalJune.proposed_spending_limit_micros = 5000000000 july_account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation') proposalJuly = may_account_budget_proposal_operation.create proposalJuly.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').CREATE proposalJuly.billing_setup = billing_setup_service.billing_setup_path(customer_id, billing_setup_id) proposalJuly.proposed_name = 'July budget' proposalJuly.proposed_start_date_time = '2018-07-01' proposalJuly.proposed_end_date_time = '2018-08-01' proposalJuly.proposed_spending_limit_micros = 1000000000 # Send request to Google Ads API (not shown).
proposal_may = client.operation.create_resource.account_budget_proposal do |proposal| proposal.billing_setup = client.path.billing_setup(customer_id, billing_setup_id) proposal.proposal_type = :CREATE proposal.proposed_name = 'May budget' proposal.proposed_start_date_time = '2018-05-01' proposal.proposed_end_date_time = '2018-06-01' proposal.proposed_spending_limit_micros = 1_000_000_000 end proposal_june = client.operation.create_resource.account_budget_proposal do |proposal| proposal.billing_setup = client.path.billing_setup(customer_id, billing_setup_id) proposal.proposal_type = :CREATE proposal.proposed_name = 'June budget' proposal.proposed_start_date_time = '2018-06-01' proposal.proposed_end_date_time = '2018-07-01' proposal.proposed_spending_limit_micros = 5_000_000_000 end proposal_july = client.operation.create_resource.account_budget_proposal do |proposal| proposal.billing_setup = client.path.billing_setup(customer_id, billing_setup_id) proposal.proposal_type = :CREATE proposal.proposed_name = 'July budget' proposal.proposed_start_date_time = '2018-07-01' proposal.proposed_end_date_time = '2018-08-01' proposal.proposed_spending_limit_micros = 1_000_000_000 end # Send request to Google Ads API (not shown).
my $may_proposal = Google::Ads::GoogleAds::V18::Resources::AccountBudgetProposal->new({ billingSetup => Google::Ads::GoogleAds::V18::Utils::ResourceNames::billing_setup( $customer_id, $billing_setup_id ), proposalType => CREATE, proposedName => "May budget", proposedStartDateTime => "2018-05-01", proposedEndDateTime => "2018-06-01", proposedSpendingLimitMicros => 1000000000 }); my $june_proposal = Google::Ads::GoogleAds::V18::Resources::AccountBudgetProposal->new({ billingSetup => Google::Ads::GoogleAds::V18::Utils::ResourceNames::billing_setup( $customer_id, $billing_setup_id ), proposalType => CREATE, proposedName => "June budget", proposedStartDateTime => "2018-06-01", proposedEndDateTime => "2018-07-01", proposedSpendingLimitMicros => 5000000000 }); my $july_proposal = Google::Ads::GoogleAds::V18::Resources::AccountBudgetProposal->new({ billingSetup => Google::Ads::GoogleAds::V18::Utils::ResourceNames::billing_setup( $customer_id, $billing_setup_id ), proposalType => CREATE, proposedName => "July budget", proposedStartDateTime => "2018-07-01", proposedEndDateTime => "2018-08-01", proposedSpendingLimitMicros => 1000000000 }); # Send request to Google Ads API (not shown).
각 제안서에서 AccountBudgetProposalType.CREATE
가 사용된 것을 확인할 수 있습니다. 이렇게 하면 동일한 예산을 세 번 업데이트하는 대신 세 개의 고유한 예산이 생성됩니다.
계정 예산 종료
계정 예산은 활성 상태일 때 종료할 수 있으며, 시작하기 전이나 승인 대기 중일 때 완전히 삭제할 수 있습니다.
활성 계정 예산 종료
활성 계정 예산은 삭제할 수 없습니다. 하지만 종료 시간을 현재 시간으로 설정할 수 있습니다. 이를 위한 가장 간단한 방법은 AccountBudgetProposalType.END
를 사용하여 제안서를 보내는 것입니다.
다음 스니펫은 기존 계정 예산을 종료하는 방법을 보여줍니다.
AccountBudgetProposal.newBuilder() .setProposalType(AccountBudgetProposalType.END) .setAccountBudget(accountBudget.getResourceName()) .build(); // Send request to Google Ads API (not shown).
AccountBudgetProposal proposal = new AccountBudgetProposal() { ProposalType = AccountBudgetProposalType.End, AccountBudget = accountBudget.ResourceName }; // Send request to Google Ads API (not shown).
$accountBudgetProposal = new AccountBudgetProposal([ 'proposal_type' => AccountBudgetProposalType::END, 'account_budget' => $accountBudget->getResourceName() ]) // Send request to Google Ads API (not shown).
account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation') proposal = account_budget_proposal_operation.create proposal.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').END proposal.account_budget = account_budget # Send request to Google Ads API (not shown).
proposal = client.resource.account_budget_proposal proposal.proposal_type = :END proposal.account_budget = account_budget.resource_name # Send request to Google Ads API (not shown).
my $account_budget_proposal = Google::Ads::GoogleAds::V18::Resources::AccountBudgetProposal->new({ proposalType => END, accountBudget => $account_budget->{resourceName}); # Send request to Google Ads API (not shown).
이는 종료일 시간을 TimeType.NOW
로 설정하여 계정 예산 업데이트를 설정하는 것과 같습니다.
시작 시간 전에 승인된 계정 예산 삭제
향후 시작될 계정 예산을 제안한 경우 시작 시간 전에 AccountBudgetProposalType.REMOVE
제안서 유형을 전송하여 이를 완전히 삭제할 수 있습니다.
다음 스니펫은 기존의 향후 계정 예산을 삭제하는 방법을 보여줍니다.
AccountBudgetProposal.newBuilder() .setProposalType(AccountBudgetProposalType.REMOVE) .setAccountBudget(accountBudget.getResourceName()) .build(); // Send request to Google Ads API (not shown).
AccountBudgetProposal proposal = new AccountBudgetProposal() { ProposalType = AccountBudgetProposalType.Remove, AccountBudget = accountBudget.ResourceName }; // Send request to Google Ads API (not shown).
$accountBudgetProposal = new AccountBudgetProposal([ 'proposal_type' => AccountBudgetProposalType::REMOVE, 'account_budget' => $accountBudget->getResourceName() ]) // Send request to Google Ads API (not shown).
account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation') proposal = account_budget_proposal_operation.create proposal.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').REMOVE proposal.account_budget = account_budget # Send request to Google Ads API (not shown).
proposal = client.resource.account_budget_proposal proposal.proposal_type = :REMOVE proposal.account_budget = account_budget.resource_name # Send request to Google Ads API (not shown).
my $account_budget_proposal = Google::Ads::GoogleAds::V18::Resources::AccountBudgetProposal->new({ proposalType => REMOVE, accountBudget => $account_budget->{resourceName}); # Send request to Google Ads API (not shown).