Anggaran akun mengontrol jumlah yang dapat dibelanjakan akun selama jangka waktu tertentu
dengan menentukan properti anggaran seperti batas pembelanjaan, waktu mulai, dan waktu berakhir. Akun tersebut
harus mengarah ke salah satu penyiapan penagihan akun, untuk menunjukkan akun Pembayaran
tertentu yang akan ditagih. Anda dapat membuat, memperbarui, dan menghapus AccountBudget
dengan mengirim objek AccountBudgetProposal
.
Objek AccountBudget
mewakili hasil akhir
penerapan proposal. Setelah proposal disetujui, perubahannya (tunduk pada
penyesuaian apa pun) akan menghasilkan pembuatan anggaran akun baru atau
pembaruan pada anggaran yang ada. Hal ini bergantung pada
proposal_type
yang ditentukan dalam permintaan.
AccountBudgetProposalType |
Deskripsi |
---|---|
CREATE |
Membuat anggaran akun baru, yang harus disetujui sebelum digunakan. |
UPDATE |
Mengubah anggaran akun yang ada. |
END |
Menetapkan waktu akhir anggaran akun ke waktu saat ini. |
REMOVE |
Menghapus anggaran akun sebelum waktu mulainya. |
Bagian di bawah ini menjelaskan perilaku setiap jenis proposal.
Membuat proposal anggaran akun
Membuat anggaran akun baru memungkinkan Anda mengontrol perilaku belanja
pelanggan. Gunakan
AccountBudgetProposalService
untuk membuat
AccountBudgetProposal
baru. Anda harus menetapkan
proposal_type
ke
CREATE
untuk menentukan bahwa anggaran baru harus dibuat. Lihat bagian
pengelolaan dalam panduan ini untuk operasi lainnya.
Ingatlah untuk menggunakan penyiapan penagihan dengan akun pembayaran tempat Anda memiliki akses tulis. Lihat panduan penyiapan penagihan untuk mengetahui detailnya.
Contoh berikut menunjukkan cara membuat proposal anggaran baru.
Java
private void runExample(GoogleAdsClient googleAdsClient, long customerId, long billingSetupId) { // Creates an AccountBudgetProposal. This will be reviewed offline by Google Ads, and if // approved will become an AccountBudget. AccountBudgetProposal proposal = AccountBudgetProposal.newBuilder() .setBillingSetup(ResourceNames.billingSetup(customerId, billingSetupId)) .setProposalType(AccountBudgetProposalType.CREATE) .setProposedName("Account Budget (example)") // Specifies the account budget starts immediately. .setProposedStartTimeType(TimeType.NOW) // Alternatively you can specify a specific start time. Refer to the // AccountBudgetProposal // resource documentation for allowed formats. // // .setProposedStartDateTime("2020-01-02 03:04:05") // Specifies that the budget runs forever. .setProposedEndTimeType(TimeType.FOREVER) // Alternatively you can specify a specific end time. Allowed formats are as above. // .setProposedEndDateTime("2021-02-03 04:05:06") // Optional: sets notes for the budget. These are free text and do not effect budget // delivery. // .setProposedNotes("Received prepayment of $0.01") // Sets the spending limit to 0.01, measured in the Google Ads account currency. .setProposedSpendingLimitMicros(10_000) // Optional: sets PO number for record keeping. This value is at the user's // discretion, and has no effect on Google Billing & Payments. // .setProposedPurchaseOrderNumber("PO number 12345") .build(); // Creates an operation which will add the new AccountBudgetProposal. AccountBudgetProposalOperation operation = AccountBudgetProposalOperation.newBuilder().setCreate(proposal).build(); try (AccountBudgetProposalServiceClient accountBudgetProposalServiceClient = googleAdsClient.getLatestVersion().createAccountBudgetProposalServiceClient()) { // Sends the request to the Account Budget Proposal Service. MutateAccountBudgetProposalResponse response = accountBudgetProposalServiceClient.mutateAccountBudgetProposal( String.valueOf(customerId), operation); System.out.printf( "Account budget proposal created: %s.%n", response.getResult().getResourceName()); } }
C#
public void Run(GoogleAdsClient client, long customerId, long billingSetupId) { // Get the AccountBudgetProposalServiceClient. AccountBudgetProposalServiceClient proposalService = client.GetService(Services.V18.AccountBudgetProposalService); // Create an AccountBudgetProposal. The proposal will be reviewed offline by Google Ads, // and if approved will become an AccountBudget. AccountBudgetProposal proposal = new AccountBudgetProposal() { BillingSetup = ResourceNames.BillingSetup(customerId, billingSetupId), ProposalType = AccountBudgetProposalType.Create, ProposedName = "Account Budget (example)", // Specify the account budget starts immediately ProposedStartTimeType = TimeType.Now, // Alternatively, you can specify a specific start time. Refer to the // AccountBudgetProposal resource documentation for allowed formats. // //ProposedStartDateTime = "2020-01-02 03:04:05", // Specify that the budget runs forever. ProposedEndTimeType = TimeType.Forever, // Alternatively you can specify a specific end time. Allowed formats are as above. //ProposedEndDateTime = "2021-02-03 04:05:06", // Optional: set notes for the budget. These are free text and do not effect budget // delivery. //ProposedNotes = "Received prepayment of $0.01", // Set the spending limit to 0.01, measured in the Google Ads account currency. ProposedSpendingLimitMicros = 10_000 // Optional: set PO number for record keeping. This value is at the user's // discretion, and has no effect on Google Billing & Payments. //ProposedPurchaseOrderNumber = "PO number 12345" }; // Create an operation which will add the new AccountBudgetProposal AccountBudgetProposalOperation operation = new AccountBudgetProposalOperation() { Create = proposal }; try { // Send the request to the Account Budget Proposal Service. MutateAccountBudgetProposalResponse response = proposalService. MutateAccountBudgetProposal(customerId.ToString(), operation); // Display the results. Console.WriteLine($"Account budget proposal '{response.Result.ResourceName}' " + "was created."); } catch (GoogleAdsException e) { Console.WriteLine("Failure:"); Console.WriteLine($"Message: {e.Message}"); Console.WriteLine($"Failure: {e.Failure}"); Console.WriteLine($"Request ID: {e.RequestId}"); throw; } }
PHP
public static function runExample( GoogleAdsClient $googleAdsClient, int $customerId, int $billingSetupId ) { // Constructs an account budget proposal. $accountBudgetProposal = new AccountBudgetProposal([ 'billing_setup' => ResourceNames::forBillingSetup($customerId, $billingSetupId), 'proposal_type' => AccountBudgetProposalType::CREATE, 'proposed_name' => 'Account Budget (example)', // Specifies the account budget starts immediately. 'proposed_start_time_type' => TimeType::NOW, // Alternatively you can specify a specific start time. Refer to the // AccountBudgetProposal class for allowed formats. // // 'proposed_start_date_time' => '2020-01-02 03:04:05', // Specify that the budget runs forever. 'proposed_end_time_type' => TimeType::FOREVER, // Alternatively you can specify a specific end time. Allowed formats are as above. // 'proposed_end_date_time' => '2021-02-03 04:05:06', // Optional: set notes for the budget. These are free text and do not effect budget // delivery. // 'proposed_notes' => 'Received prepayment of $0.01', // Optional: set PO number for record keeping. This value is at the user's // discretion, and has no effect on Google Billing & Payments. // 'proposed_purchase_order_number' => 'PO number 12345', // Set the spending limit to 0.01, measured in the Google Ads account currency. 'proposed_spending_limit_micros' => 10000 ]); $accountBudgetProposalOperation = new AccountBudgetProposalOperation(); $accountBudgetProposalOperation->setCreate($accountBudgetProposal); // Issues a mutate request to add the account budget proposal. $accountBudgetProposalServiceClient = $googleAdsClient->getAccountBudgetProposalServiceClient(); $response = $accountBudgetProposalServiceClient->mutateAccountBudgetProposal( MutateAccountBudgetProposalRequest::build($customerId, $accountBudgetProposalOperation) ); printf( "Added an account budget proposal with resource name '%s'.%s", $response->getResult()->getResourceName(), PHP_EOL ); }
Python
def main(client, customer_id, billing_setup_id): account_budget_proposal_service = client.get_service( "AccountBudgetProposalService" ) billing_setup_service = client.get_service("BillingSetupService") account_budget_proposal_operation = client.get_type( "AccountBudgetProposalOperation" ) proposal = account_budget_proposal_operation.create proposal.proposal_type = client.enums.AccountBudgetProposalTypeEnum.CREATE proposal.billing_setup = billing_setup_service.billing_setup_path( customer_id, billing_setup_id ) proposal.proposed_name = "Account Budget Proposal (example)" # Specify the account budget starts immediately proposal.proposed_start_time_type = client.enums.TimeTypeEnum.NOW # Alternatively you can specify a specific start time. Refer to the # AccountBudgetProposal resource documentation for allowed formats. # # proposal.proposed_start_date_time = '2020-01-02 03:04:05' # Specify that the budget runs forever proposal.proposed_end_time_type = client.enums.TimeTypeEnum.FOREVER # Alternatively you can specify a specific end time. Allowed formats are as # above. # # proposal.proposed_end_date_time = '2021-01-02 03:04:05' # Optional: set notes for the budget. These are free text and do not effect # budget delivery. # # proposal.proposed_notes = 'Received prepayment of $0.01' proposal.proposed_spending_limit_micros = 10000 account_budget_proposal_response = ( account_budget_proposal_service.mutate_account_budget_proposal( customer_id=customer_id, operation=account_budget_proposal_operation, ) ) print( "Created account budget proposal " f'"{account_budget_proposal_response.result.resource_name}".' )
Ruby
def add_account_budget_proposal(customer_id, billing_setup_id) # GoogleAdsClient will read a config file from # ENV['HOME']/google_ads_config.rb when called without parameters client = Google::Ads::GoogleAds::GoogleAdsClient.new operation = client.operation.create_resource.account_budget_proposal do |proposal| proposal.billing_setup = client.path.billing_setup(customer_id, billing_setup_id) proposal.proposal_type = :CREATE proposal.proposed_name = 'Account Budget (example)' # Specify the account budget starts immediately proposal.proposed_start_time_type = :NOW # Alternatively you can specify a specific start time. Refer to the # AccountBudgetProposal resource documentation for allowed formats. # # proposal.proposed_start_date_time = '2020-01-02 03:04:05' # Specify that the budget runs forever. proposal.proposed_end_time_type = :FOREVER # Alternatively you can specify a specific end time. Allowed formats are as # above. # # proposal.proposed_end_date_time = '2021-01-02 03:04:05' # Optional: set notes for the budget. These are free text and do not affect # budget delivery. # # proposal.proposed_notes = 'Received prepayment of $0.01' # Set the spending limit to 0.01, measured in the Google Ads account currency. proposal.proposed_spending_limit_micros = 10_000 end account_budget_proposal_service = client.service.account_budget_proposal # Add budget proposal. response = account_budget_proposal_service.mutate_account_budget_proposal( customer_id: customer_id, operation: operation, ) puts sprintf("Created budget proposal %s.", response.results.first.resource_name) end
Perl
sub add_account_budget_proposal { my ($api_client, $customer_id, $billing_setup_id) = @_; # Create an account budget proposal. my $account_budget_proposal = Google::Ads::GoogleAds::V18::Resources::AccountBudgetProposal->new({ billingSetup => Google::Ads::GoogleAds::V18::Utils::ResourceNames::billing_setup( $customer_id, $billing_setup_id ), proposalType => CREATE, proposedName => "Account Budget (example)", # Specify that the account budget starts immediately. proposedStartTimeType => NOW, # Alternatively you can specify a specific start time. Refer to the # AccountBudgetProposal class for allowed formats. # # proposedStartDateTime => "2020-01-02 03:04:05", # Specify that the account budget runs forever. proposedEndDateTime => FOREVER, # Alternatively you can specify a specific end time. Allowed formats are as below. # proposedEndDateTime => "2021-02-03 04:05:06", # Optional: set notes for the budget. These are free text and do not effect budget # delivery. # proposedNotes => "Received prepayment of $0.01", # Optional: set PO number for record keeping. This value is at the user's # discretion, and has no effect on Google Billing & Payments. # proposedPurchaseOrderNumber => "PO number 12345", # Set the spending limit to 0.01, measured in the Google Ads account currency. proposedSpendingLimitMicros => 10000 }); # Create an account budget proposal operation. my $account_budget_proposal_operation = Google::Ads::GoogleAds::V18::Services::AccountBudgetProposalService::AccountBudgetProposalOperation ->new({ create => $account_budget_proposal }); # Add the account budget proposal. my $account_budget_proposal_response = $api_client->AccountBudgetProposalService()->mutate({ customerId => $customer_id, operation => $account_budget_proposal_operation }); printf "Created account budget proposal '%s'.\n", $account_budget_proposal_response->{result}{resourceName}; return 1; }
Dalam permintaan proposal anggaran akun,
proposed_start_date_time
dan
proposed_end_date_time
selalu berada di zona waktu akun pelanggan; Anda tidak dapat menentukan zona waktu.
Batas pembelanjaan yang diusulkan selalu diukur dalam mata uang akun; tentukan ini menggunakan unit "mikro", sehingga $1,00 = 1.000.000 mikro.
Secara opsional, Anda dapat menyertakan nomor Pesanan Pembelian yang akan ditampilkan di samping tagihan ini pada invoice. Hal ini tidak memengaruhi penayangan anggaran.
Menghapus proposal anggaran akun yang tertunda
Anda dapat menghapus seluruh proposal anggaran yang tertunda dengan mengirimkan permintaan AccountBudgetProposalOperation Remove
dengan nama resource proposal anggaran akun. Namun, perhatikan bahwa proposal anggaran biasanya diterapkan dalam hitungan menit.
AccountBudgetProposalOperation operation = AccountBudgetProposalOperation.newBuilder() .setRemove(StringValue.of(ResourceNames.accountBudgetProposal(customerId, accountBudgetProposalId))) .build(); // Send request to Google Ads API (not shown).
AccountBudgetProposalOperation operation = new AccountBudgetProposalOperation() { Remove = ResourceNames.AccountBudgetProposal(customerId, accountBudgetProposalId) }; // Send request to Google Ads API (not shown).
$accountBudgetProposalOperation = new AccountBudgetProposalOperation(); $accountBudgetProposalOperation->setRemove(ResourceNames::forAccountBudgetProposal($customerId, $accountBudgetProposalId)); // Send request to Google Ads API (not shown).
account_budget_proposal_service = client.get_service('AccountBudgetProposalService') account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation') proposal = account_budget_proposal_operation.remove proposal.resource_name = account_budget_proposal_service.account_budget_proposal_path(customer_id, account_budget_proposal_id): # Send request to Google Ads API (not shown).
operation = client.operation.remove_resource.account_budget_proposal(client.path.account_budget_proposal(customer_id, account_budget_proposal_id))
# Send request to Google Ads API (not shown).
my $account_budget_proposal_operation = Google::Ads::GoogleAds::V18::Services::AccountBudgetProposalService::AccountBudgetProposalOperation ->new({ remove => Google::Ads::GoogleAds::V18::Utils::ResourceNames::billing_setup( $customer_id, $account_budget_proposal_id ) }); # Send request to Google Ads API (not shown).
Jika Anda melakukan kesalahan pada proposal asli, Anda dapat mengirim ulang
proposal sebagai operasi UPDATE
. Lihat
Memperbarui anggaran akun yang ada.
Mengambil anggaran akun yang ada
Kueri GAQL berikut mengambil semua anggaran akun yang ada di akun:
SELECT
account_budget.status,
account_budget.billing_setup,
account_budget.approved_spending_limit_micros,
account_budget.approved_spending_limit_type,
account_budget.proposed_spending_limit_micros,
account_budget.proposed_spending_limit_type,
account_budget.adjusted_spending_limit_micros,
account_budget.adjusted_spending_limit_type,
account_budget.approved_start_date_time,
account_budget.proposed_start_date_time,
account_budget.approved_end_date_time,
account_budget.approved_end_time_type,
account_budget.proposed_end_date_time,
account_budget.proposed_end_time_type
FROM
account_budget
Perhatikan bahwa kolom yang mengenkapsulasi waktu mulai, waktu berakhir, dan
batas pembelanjaan anggaran akun memiliki beberapa varian dengan awalan seperti proposed
dan
approved
yang memungkinkan perbandingan nilai yang awalnya diusulkan dengan
nilai yang disetujui. Batas pembelanjaan memiliki kolom tambahan dengan
awalan adjusted
untuk menunjukkan batas pembelanjaan saat ini yang berlaku setelah
penyesuaian diterapkan ke jumlah yang disetujui.
Batas pembelanjaan anggaran akun yang disetujui dapat disesuaikan dari waktu ke waktu untuk mencerminkan berbagai kredit untuk hal-hal seperti kelebihan tayang anggaran, aktivitas klik yang tidak valid, dan kupon promosi. Informasi selengkapnya tentang anggaran akun dan kredit dan penyesuaian akun dapat ditemukan di Pusat Bantuan Google Ads.
Setiap anggaran akun baru yang menunggu persetujuan, beserta anggaran akun
yang ada yang memiliki pembaruan yang tertunda, juga akan berisi
kolom pending_proposal
yang dapat dipilih. Objek ini akan berisi
ID resource
dari objek AccountBudgetProposal
terkait.
Mengelola anggaran akun yang ada
Setelah membuat anggaran akun untuk pelanggan, Anda dapat menggunakan
AccountBudgetProposalService
untuk
mengelola parameter anggaran. Operasi pengelolaan yang paling umum adalah
memperbarui kolom spending_limit
dan end_date_time
. Untuk mengetahui daftar lengkap
kolom yang dapat diubah, lihat dokumen
AccountBudgetProposal
.
Anda memiliki opsi untuk memperbarui anggaran akun yang ada atau membuat anggaran yang sepenuhnya baru, keduanya ditampilkan di sini.
Memperbarui anggaran akun yang ada
Anda dapat memperbarui kolom anggaran akun yang ada dengan mengirimkan
objek AccountBudgetProposal
dengan
AccountBudgetProposalType
ditetapkan ke UPDATE
. Perhatikan bahwa Anda juga harus menunjukkan kolom yang diperbarui dalam argumen UpdateMask
operasi.
Cuplikan berikut menunjukkan cara memperbarui batas pembelanjaan yang diusulkan untuk anggaran akun yang ada.
AccountBudgetProposal proposal = AccountBudgetProposal.newBuilder() .setProposalType(AccountBudgetProposalType.UPDATE) .setAccountBudget(accountBudget.getResourceName()) .setProposedSpendingLimitMicros( accountBudget.getProposedSpendingLimitMicros().getValue() + increaseAmount) .build(); AccountBudgetProposalOperation operation = AccountBudgetProposalOperation.newBuilder() .setCreate(proposal) .setUpdateMask( FieldMask.newBuilder().addAllPaths(Arrays.asList("proposed_spending_limit")).build()) .build(); // Send request to Google Ads API (not shown).
AccountBudgetProposal proposal = new AccountBudgetProposal() { ProposalType = AccountBudgetProposalType.Update, AccountBudget = accountBudget.ResourceName, ProposedSpendingLimitMicros = accountBudget.ProposedSpendingLimitMicros + increaseAmount }; AccountBudgetProposalOperation operation = new AccountBudgetProposalOperation() { Create = proposal, UpdateMask = new FieldMask() { Paths = { "proposed_spending_limit" } } }; // Send request to Google Ads API (not shown).
$accountBudgetProposal = new AccountBudgetProposal([ 'proposal_type' => AccountBudgetProposalType::UPDATE, 'account_budget' => $accountBudget->getResourceName(), 'proposed_spending_limit_micros' => $accountBudget->getProposedSpendingLimitMicros() + $increaseAmount]) $accountBudgetProposalOperation = new AccountBudgetProposalOperation(); $accountBudgetProposalOperation->setCreate($accountBudgetProposal); $accountBudgetProposalOperation->setUpdateMask( FieldMasks::allSetFieldsOf($accountBudgetProposal) ); // Send request to Google Ads API (not shown).
account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation') proposal = account_budget_proposal_operation.create proposal.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').UPDATE proposal.account_budget = account_budget proposal.proposed_spending_limit_micros = account_budget.proposed_spending_limit_micros + increase_amount field_mask = protobuf_helpers.field_mask(None, proposal) account_budget_proposal_operation.update_mask.CopyFrom(field_mask) # Send request to Google Ads API (not shown).
proposal = client.resource.account_budget_proposal proposal.proposal_type = :UPDATE mask = client.field_mask.with proposal do proposal.account_budget = account_budget.resource_name proposal.proposed_spending_limit_micros = account_budget.proposed_spending_limit_micros + increase_amount end operation = client.operation.account_budget_proposal do |op| op.create = proposal op.update_mask = mask end # Send request to Google Ads API (not shown).
my $account_budget_proposal = Google::Ads::GoogleAds::V18::Resources::AccountBudgetProposal->new({ proposalType => UPDATE, accountBudget => $account_budget->{resourceName}, proposedSpendingLimitMicros => $account_budget->{proposedSpendingLimitMicros} + $increaseAmount}); my $account_budget_proposal_operation = Google::Ads::GoogleAds::V18::Services::AccountBudgetProposalService::AccountBudgetProposalOperation ->new({ create => $account_budget_proposal, updateMask => all_set_fields_of($account_budget_proposal)}); # Send request to Google Ads API (not shown).
Rantai anggaran akun
Sebagai alternatif untuk memperbarui anggaran yang ada, Google Ads memungkinkan Anda menyambungkan beberapa anggaran akun untuk dijalankan secara berurutan. Dalam contoh berikut, pelanggan memiliki batas pembelanjaan yang berbeda setiap bulan.
Hal ini dapat dilakukan dengan membuat tiga
objek AccountBudgetProposal
dan
mengirimnya ke
AccountBudgetProposalService
.
Cuplikan di bawah menunjukkan pembuatan rantai tersebut menggunakan penyiapan penagihan yang ada.
AccountBudgetProposal proposalMay = AccountBudgetProposal.newBuilder() .setBillingSetup(ResourceNames.billingSetup(customerId, billingSetupId)) .setProposalType(AccountBudgetProposalType.CREATE) .setProposedName("May budget") .setProposedStartDateTime("2018-05-01") .setProposedEndDateTime("2018-06-01") .setProposedSpendingLimitMicros(1_000_000_000L) .build(); AccountBudgetProposal proposalJune = AccountBudgetProposal.newBuilder() .setBillingSetup(ResourceNames.billingSetup(customerId, billingSetupId)) .setProposalType(AccountBudgetProposalType.CREATE) .setProposedName("June budget") .setProposedStartDateTime("2018-06-01") .setProposedEndDateTime("2018-07-01") .setProposedSpendingLimitMicros(5_000_000_000L) .build(); AccountBudgetProposal proposalJuly = AccountBudgetProposal.newBuilder() .setBillingSetup(ResourceNames.billingSetup(customerId, billingSetupId)) .setProposalType(AccountBudgetProposalType.CREATE) .setProposedName("July budget") .setProposedStartDateTime("2018-07-01") .setProposedEndDateTime("2018-08-01") .setProposedSpendingLimitMicros(1_000_000_000L) .build(); // Send request to Google Ads API (not shown).
AccountBudgetProposal proposalMay = new AccountBudgetProposal() { BillingSetup = ResourceNames.BillingSetup(customerId, billingSetupId), ProposalType = AccountBudgetProposalType.Create, ProposedName = "May budget", ProposedStartDateTime = "2018-05-01", ProposedEndDateTime = "2018-06-01", ProposedSpendingLimitMicros = 1_000_000_000 } AccountBudgetProposal proposalJune = new AccountBudgetProposal() { BillingSetup = ResourceNames.BillingSetup(customerId, billingSetupId), ProposalType = AccountBudgetProposalType.Create, ProposedName = "June budget", ProposedStartDateTime = "2018-06-01", ProposedEndDateTime = "2018-07-01", ProposedSpendingLimitMicros = 5_000_000_000 } AccountBudgetProposal proposalJuly = new AccountBudgetProposal() { BillingSetup = ResourceNames.BillingSetup(customerId, billingSetupId), ProposalType = AccountBudgetProposalType.Create, ProposedName = "July budget", ProposedStartDateTime = "2018-07-01", ProposedEndDateTime = "2018-08-01", ProposedSpendingLimitMicros = 1_000_000_000 } // Send request to Google Ads API (not shown).
$proposalMay = new AccountBudgetProposal([ 'billing_setup' => ResourceNames::forBillingSetup($customerId, $billingSetupId), 'proposal_type' => AccountBudgetProposalType::CREATE, 'proposed_name' => 'May budget', 'proposed_start_date_time' => '2018-05-01', 'proposed_end_date_time' => '2018-06-01', 'proposed_spending_limit_micros' => 1000000000 ]); $proposalJune = new AccountBudgetProposal([ 'billing_setup' => ResourceNames::forBillingSetup($customerId, $billingSetupId), 'proposal_type' => AccountBudgetProposalType::CREATE, 'proposed_name' => 'June budget', 'proposed_start_date_time' => '2018-06-01', 'proposed_end_date_time' => '2018-07-01', 'proposed_spending_limit_micros' => 5000000000 ]); $proposalJuly = new AccountBudgetProposal([ 'billing_setup' => ResourceNames::forBillingSetup($customerId, $billingSetupId), 'proposal_type' => AccountBudgetProposalType::CREATE, 'proposed_name' => 'July budget', 'proposed_start_date_time' => '2018-07-01', 'proposed_end_date_time' => '2018-08-01', 'proposed_spending_limit_micros' => 1000000000 ]); // Send request to Google Ads API (not shown).
may_account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation') proposalMay = may_account_budget_proposal_operation.create proposalMay.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').CREATE proposalMay.billing_setup = billing_setup_service.billing_setup_path(customer_id, billing_setup_id) proposalMay.proposed_name = 'May budget' proposalMay.proposed_start_date_time = '2018-05-01' proposalMay.proposed_end_date_time = '2018-06-01' proposalMay.proposed_spending_limit_micros = 1000000000 june_account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation') proposalJune = may_account_budget_proposal_operation.create proposalJune.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').CREATE proposalJune.billing_setup = billing_setup_service.billing_setup_path(customer_id, billing_setup_id) proposalJune.proposed_name = 'June budget' proposalJune.proposed_start_date_time = '2018-06-01' proposalJune.proposed_end_date_time = '2018-07-01' proposalJune.proposed_spending_limit_micros = 5000000000 july_account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation') proposalJuly = may_account_budget_proposal_operation.create proposalJuly.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').CREATE proposalJuly.billing_setup = billing_setup_service.billing_setup_path(customer_id, billing_setup_id) proposalJuly.proposed_name = 'July budget' proposalJuly.proposed_start_date_time = '2018-07-01' proposalJuly.proposed_end_date_time = '2018-08-01' proposalJuly.proposed_spending_limit_micros = 1000000000 # Send request to Google Ads API (not shown).
proposal_may = client.operation.create_resource.account_budget_proposal do |proposal| proposal.billing_setup = client.path.billing_setup(customer_id, billing_setup_id) proposal.proposal_type = :CREATE proposal.proposed_name = 'May budget' proposal.proposed_start_date_time = '2018-05-01' proposal.proposed_end_date_time = '2018-06-01' proposal.proposed_spending_limit_micros = 1_000_000_000 end proposal_june = client.operation.create_resource.account_budget_proposal do |proposal| proposal.billing_setup = client.path.billing_setup(customer_id, billing_setup_id) proposal.proposal_type = :CREATE proposal.proposed_name = 'June budget' proposal.proposed_start_date_time = '2018-06-01' proposal.proposed_end_date_time = '2018-07-01' proposal.proposed_spending_limit_micros = 5_000_000_000 end proposal_july = client.operation.create_resource.account_budget_proposal do |proposal| proposal.billing_setup = client.path.billing_setup(customer_id, billing_setup_id) proposal.proposal_type = :CREATE proposal.proposed_name = 'July budget' proposal.proposed_start_date_time = '2018-07-01' proposal.proposed_end_date_time = '2018-08-01' proposal.proposed_spending_limit_micros = 1_000_000_000 end # Send request to Google Ads API (not shown).
my $may_proposal = Google::Ads::GoogleAds::V18::Resources::AccountBudgetProposal->new({ billingSetup => Google::Ads::GoogleAds::V18::Utils::ResourceNames::billing_setup( $customer_id, $billing_setup_id ), proposalType => CREATE, proposedName => "May budget", proposedStartDateTime => "2018-05-01", proposedEndDateTime => "2018-06-01", proposedSpendingLimitMicros => 1000000000 }); my $june_proposal = Google::Ads::GoogleAds::V18::Resources::AccountBudgetProposal->new({ billingSetup => Google::Ads::GoogleAds::V18::Utils::ResourceNames::billing_setup( $customer_id, $billing_setup_id ), proposalType => CREATE, proposedName => "June budget", proposedStartDateTime => "2018-06-01", proposedEndDateTime => "2018-07-01", proposedSpendingLimitMicros => 5000000000 }); my $july_proposal = Google::Ads::GoogleAds::V18::Resources::AccountBudgetProposal->new({ billingSetup => Google::Ads::GoogleAds::V18::Utils::ResourceNames::billing_setup( $customer_id, $billing_setup_id ), proposalType => CREATE, proposedName => "July budget", proposedStartDateTime => "2018-07-01", proposedEndDateTime => "2018-08-01", proposedSpendingLimitMicros => 1000000000 }); # Send request to Google Ads API (not shown).
Perhatikan penggunaan
AccountBudgetProposalType.CREATE
di setiap proposal. Tindakan ini akan membuat tiga anggaran yang berbeda, bukan memperbarui
anggaran yang sama tiga kali.
Mengakhiri anggaran akun
Anggaran akun dapat diakhiri saat aktif, dan dihapus sepenuhnya sebelum dimulai atau saat menunggu persetujuan.
Mengakhiri anggaran akun yang aktif
Anggaran akun aktif tidak dapat dihapus. Namun, Anda dapat menetapkan waktu akhir
ke waktu saat ini. Cara termudah untuk melakukannya adalah dengan mengirim proposal dengan
AccountBudgetProposalType.END
.
Cuplikan berikut menunjukkan cara mengakhiri anggaran akun yang ada.
AccountBudgetProposal.newBuilder() .setProposalType(AccountBudgetProposalType.END) .setAccountBudget(accountBudget.getResourceName()) .build(); // Send request to Google Ads API (not shown).
AccountBudgetProposal proposal = new AccountBudgetProposal() { ProposalType = AccountBudgetProposalType.End, AccountBudget = accountBudget.ResourceName }; // Send request to Google Ads API (not shown).
$accountBudgetProposal = new AccountBudgetProposal([ 'proposal_type' => AccountBudgetProposalType::END, 'account_budget' => $accountBudget->getResourceName() ]) // Send request to Google Ads API (not shown).
account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation') proposal = account_budget_proposal_operation.create proposal.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').END proposal.account_budget = account_budget # Send request to Google Ads API (not shown).
proposal = client.resource.account_budget_proposal proposal.proposal_type = :END proposal.account_budget = account_budget.resource_name # Send request to Google Ads API (not shown).
my $account_budget_proposal = Google::Ads::GoogleAds::V18::Resources::AccountBudgetProposal->new({ proposalType => END, accountBudget => $account_budget->{resourceName}); # Send request to Google Ads API (not shown).
Hal ini setara dengan menetapkan pembaruan anggaran akun dengan menetapkan waktu
tanggal akhir ke TimeType.NOW
.
Menghapus anggaran akun yang disetujui sebelum waktu mulainya
Jika Anda mengusulkan anggaran akun untuk dimulai pada masa mendatang, Anda dapat menghapusnya
sepenuhnya sebelum waktu mulai dengan mengirimkan
jenis proposal
AccountBudgetProposalType.REMOVE
.
Cuplikan berikut menunjukkan penghapusan anggaran akun mendatang yang ada.
AccountBudgetProposal.newBuilder() .setProposalType(AccountBudgetProposalType.REMOVE) .setAccountBudget(accountBudget.getResourceName()) .build(); // Send request to Google Ads API (not shown).
AccountBudgetProposal proposal = new AccountBudgetProposal() { ProposalType = AccountBudgetProposalType.Remove, AccountBudget = accountBudget.ResourceName }; // Send request to Google Ads API (not shown).
$accountBudgetProposal = new AccountBudgetProposal([ 'proposal_type' => AccountBudgetProposalType::REMOVE, 'account_budget' => $accountBudget->getResourceName() ]) // Send request to Google Ads API (not shown).
account_budget_proposal_operation = client.get_type('AccountBudgetProposalOperation') proposal = account_budget_proposal_operation.create proposal.proposal_type = client.get_type('AccountBudgetProposalTypeEnum').REMOVE proposal.account_budget = account_budget # Send request to Google Ads API (not shown).
proposal = client.resource.account_budget_proposal proposal.proposal_type = :REMOVE proposal.account_budget = account_budget.resource_name # Send request to Google Ads API (not shown).
my $account_budget_proposal = Google::Ads::GoogleAds::V18::Resources::AccountBudgetProposal->new({ proposalType => REMOVE, accountBudget => $account_budget->{resourceName}); # Send request to Google Ads API (not shown).