Criar exclusões de dados

As exclusões de dados são uma ferramenta avançada que pode ser usada para informar os Lances inteligentes para ignorar todos os dados de datas em que houve problemas com a conversão de uma conta monitoramento. Para mais detalhes sobre como funcionam as exclusões de dados, consulte o página de ajuda sobre exclusões de dados.

Criar exclusões de dados de forma programática usando BiddingDataExclusions

Escopo

BiddingDataExclusions têm uma permissão obrigatória scope que pode ser definido como o valores a seguir. Outras opções de configuração específicas do escopo foram definidas de acordo com o escopo usado.

• CAMPAIGN: a exclusão é aplicada a campanhas específicas. Defina o Campo campaigns a uma lista de nomes de recursos da campanha para a qual esta exclusão se aplicam.
  • O número máximo de campanhas por BiddingDataExclusion é 2.000.
• CHANNEL: a exclusão é aplicada a campanhas que pertencem a grupos tipos de canal. Defina o advertising_channel_types campo a uma lista de AdvertisingChannelTypes à qual este e exclusão será aplicada.

Dispositivos

Além do escopo, as exclusões de dados podem ser configuradas com um parâmetro lista de tipos de dispositivos aos quais a exclusão será aplicada. Se devices está definido, somente conversão os dados dos tipos de dispositivos especificados são excluídos. Se não for especificado, a conversão os dados de todos os tipos de dispositivos serão excluídos.

Datas e horas

Além do escopo e dos dispositivos opcionais, cada exclusão de dados precisa ter um início e a data e hora de término. Uma exclusão de dados é retroativa e deve ser usada para eventos que têm start_date_time no passado e um end_date_time no passado ou no futuro. Os horários estão no fuso horário da conta.

Exemplo

O exemplo a seguir mostra como criar uma exclusão de dados com o escopo CHANNEL. As seções comentadas mostram como especificar campanhas se você precisasse em vez disso, defina um escopo CAMPAIGN.

BiddingDataExclusion DataExclusion =
    BiddingDataExclusion.newBuilder()
        // A unique name is required for every data exclusion.
        .setName("Data exclusion #" + getPrintableDateTime())
        // The CHANNEL scope applies the data exclusion to all campaigns of specific
        // advertising channel types. In this example, the exclusion will only apply to
        // Search campaigns. Use the CAMPAIGN scope to instead limit the scope to specific
        // campaigns.
        .setScope(SeasonalityEventScope.CHANNEL)
        .addAdvertisingChannelTypes(AdvertisingChannelType.SEARCH)
        // If setting scope CAMPAIGN, add individual campaign resource name(s) according to
        // the commented out line below.
        // .addCampaigns("INSERT_CAMPAIGN_RESOURCE_NAME_HERE")
        .setStartDateTime(startDateTime)
        .setEndDateTime(endDateTime)
        .build();

BiddingDataExclusionOperation operation =
    BiddingDataExclusionOperation.newBuilder().setCreate(DataExclusion).build();

MutateBiddingDataExclusionsResponse response =
    DataExclusionServiceClient.mutateBiddingDataExclusions(
        customerId.toString(), ImmutableList.of(operation));
System.out.printf(
    "Added data exclusion with resource name: %s%n",
    response.getResults(0).getResourceName());
AddBiddingDataExclusion.java
      

BiddingDataExclusion dataExclusion = new BiddingDataExclusion()
{
    // A unique name is required for every data exclusion.
    Name = "Data exclusion #" + ExampleUtilities.GetRandomString(),
    // The CHANNEL scope applies the data exclusion to all campaigns of specific
    // advertising channel types. In this example, the the exclusion will only apply to
    // Search campaigns. Use the CAMPAIGN scope to instead limit the scope to specific
    // campaigns.
    Scope = SeasonalityEventScope.Channel,
    AdvertisingChannelTypes = { AdvertisingChannelType.Search },
    // The date range should be less than 14 days.
    StartDateTime = startDateTime,
    EndDateTime = endDateTime,
};
BiddingDataExclusionOperation operation = new BiddingDataExclusionOperation()
{
    Create = dataExclusion
};

try
{
    MutateBiddingDataExclusionsResponse response =
        biddingDataExclusionService.MutateBiddingDataExclusions(
            customerId.ToString(), new[] { operation });
    Console.WriteLine($"Added data exclusion with resource name: " +
        $"{response.Results[0].ResourceName}");
}
catch (GoogleAdsException e)
{
    Console.WriteLine("Failure:");
    Console.WriteLine($"Message: {e.Message}");
    Console.WriteLine($"Failure: {e.Failure}");
    Console.WriteLine($"Request ID: {e.RequestId}");
    throw;
}
AddBiddingDataExclusion.cs
      

// Creates a bidding data exclusion.
$dataExclusion = new BiddingDataExclusion([
    // A unique name is required for every data exclusion.
    'name' => 'Data exclusion #' . Helper::getPrintableDatetime(),
    // The CHANNEL scope applies the data exclusion to all campaigns of specific
    // advertising channel types. In this example, the exclusion will only apply to
    // Search campaigns. Use the CAMPAIGN scope to instead limit the scope to specific
    // campaigns.
    'scope' => SeasonalityEventScope::CHANNEL,
    'advertising_channel_types' => [AdvertisingChannelType::SEARCH],
    // If setting scope CAMPAIGN, add individual campaign resource name(s) according to
    // the commented out line below.
    // 'campaigns' => ['INSERT_CAMPAIGN_RESOURCE_NAME_HERE'],
    'start_date_time' => $startDateTime,
    'end_date_time' => $endDateTime
]);

// Creates a bidding data exclusion operation.
$biddingDataExclusionOperation = new BiddingDataExclusionOperation();
$biddingDataExclusionOperation->setCreate($dataExclusion);

// Submits the bidding data exclusion operation to add the bidding data exclusion.
$biddingDataExclusionServiceClient =
    $googleAdsClient->getBiddingDataExclusionServiceClient();
$response = $biddingDataExclusionServiceClient->mutateBiddingDataExclusions(
    MutateBiddingDataExclusionsRequest::build($customerId, [$biddingDataExclusionOperation])
);

printf(
    "Added bidding data exclusion with resource name: '%s'.%s",
    $response->getResults()[0]->getResourceName(),
    PHP_EOL
);
AddBiddingDataExclusion.php
      

bidding_data_exclusion_service = client.get_service(
    "BiddingDataExclusionService"
)
operation = client.get_type("BiddingDataExclusionOperation")
bidding_data_exclusion = operation.create
# A unique name is required for every data exclusion
bidding_data_exclusion.name = f"Data exclusion #{uuid4()}"
# The CHANNEL scope applies the data exclusion to all campaigns of specific
# advertising channel types. In this example, the exclusion will only
# apply to Search campaigns. Use the CAMPAIGN scope to instead limit the
# scope to specific campaigns.
bidding_data_exclusion.scope = (
    client.enums.SeasonalityEventScopeEnum.CHANNEL
)
bidding_data_exclusion.advertising_channel_types.append(
    client.enums.AdvertisingChannelTypeEnum.SEARCH
)
# If setting scope CAMPAIGN, add individual campaign resource name(s)
# according to the commented out line below.
#
# bidding_data_exclusion.campaigns.append(
#     "INSERT_CAMPAIGN_RESOURCE_NAME_HERE"
# )

bidding_data_exclusion.start_date_time = start_date_time
bidding_data_exclusion.end_date_time = end_date_time

response = bidding_data_exclusion_service.mutate_bidding_data_exclusions(
    customer_id=customer_id, operations=[operation]
)

resource_name = response.results[0].resource_name

print(f"Added data exclusion with resource name: '{resource_name}'")
add_bidding_data_exclusion.py
      

client = Google::Ads::GoogleAds::GoogleAdsClient.new

operation = client.operation.create_resource.bidding_data_exclusion do |bda|
  # A unique name is required for every data excluseion.
  bda.name = "Seasonality Adjustment #{(Time.new.to_f * 1000).to_i}"

  # The CHANNEL scope applies the data exclusion to all campaigns of specific
  # advertising channel types. In this example, the conversion_rate_modifier
  # will only apply to Search campaigns. Use the CAMPAIGN scope to instead
  # limit the scope to specific campaigns.
  bda.scope = :CHANNEL
  bda.advertising_channel_types << :SEARCH

  # If setting scope CAMPAIGN, add individual campaign resource name(s)
  # according to the commented out line below.
  #
  # bda.campaigns << "INSERT_CAMPAIGN_RESOURCE_NAME_HERE"

  bda.start_date_time = start_date_time
  bda.end_date_time = end_date_time
end

response = client.service.bidding_data_exclusion.mutate_bidding_data_exclusions(
  customer_id: customer_id,
  operations: [operation],
)

puts "Added data exclusion with resource name #{response.results.first.resource_name}."
add_bidding_data_exclusion.rb
      

my $data_exclusion =
  Google::Ads::GoogleAds::V17::Resources::BiddingDataExclusion->new({
    # A unique name is required for every data exclusion.
    name => "Data exclusion #" . uniqid(),
    # The CHANNEL scope applies the data exclusion to all campaigns of specific
    # advertising channel types. In this example, the exclusion will only apply
    # to Search campaigns. Use the CAMPAIGN scope to instead limit the scope to
    # specific campaigns.
    scope                   => CHANNEL,
    advertisingChannelTypes => [SEARCH],
    # If setting scope CAMPAIGN, add individual campaign resource name(s)
    # according to the commented out line below.
    # campaigns     => ["INSERT_CAMPAIGN_RESOURCE_NAME_HERE"],
    startDateTime => $start_date_time,
    endDateTime   => $end_date_time
  });

my $operation =
  Google::Ads::GoogleAds::V17::Services::BiddingDataExclusionService::BiddingDataExclusionOperation
  ->new({
    create => $data_exclusion
  });

my $response = $api_client->BiddingDataExclusionService()->mutate({
    customerId => $customer_id,
    operations => [$operation]});

printf "Added data exclusion with resource name: '%s'.\n",
  $response->{results}[0]{resourceName};
add_bidding_data_exclusion.pl