Reklamların ne zaman telefon aramasıyla sonuçlandığını ve bu telefon aramalarının ne zaman değerli müşteri işlemleriyle sonuçlandığını izlemek amacıyla Google Ads'e çevrimdışı telefon araması dönüşümlerini yüklemek için Google Ads API'yi kullanabilirsiniz.
Aramaya eklenmiş bir Google yönlendirme numarası yoksa mobil tıkla ve ara tıklaması dönüşüm olarak yüklenemez. Google yönlendirme numarası olmadan, Google'ın tıklamanın bir telefon aramasıyla ve ardından bir dönüşümle sonuçlandığından emin olması mümkün değildir. Tıklama bu şekilde yüklenirse dönüşüm işlemi tarafından yoksayılır.
Google Ads kullanıcı arayüzüyle eşleme, Yüklemeler dönüşüm kaynağını ve ardından Telefon aramalarından elde edilen dönüşümler'i seçmekle aynıdır.
Telefon araması dönüşümü oluşturma
CallConversion oluştururken unutulmaması gereken birkaç nokta:
Google Ads API'nin v15 sürümünden başlayarak,
CallConversionnesnesininconsentalanını doldurmanız gerekir.UploadCallConversionsRequestöğesininpartial_failureözelliği her zamantrueolarak ayarlanmalıdır. Geçerli ve başarısız işlemleri aynı anda ele alırken kısmi hata yönergelerini uygulayın.Yükleme dönüşüm isteği için
TOO_RECENT_CONVERSION_ACTIONveyaTOO_RECENT_CALLyanıt mesajıyla karşılaşırsanız başarısız olan satırları yeniden denemeden önce sırasıyla 6 saat veya 12 saat bekleyin.İçe aktarılan dönüşüm istatistiklerinin Google Ads hesabınızda görünmesi 3 saati bulabilir.
Yinelenen dönüşümler (yani daha önce yüklenmiş olan
caller_id,conversion_date_timeveconversion_actioniçeren birCallConversion) yüklersenizCALL_CONVERSION_ALREADY_EXISTShatası döndürülür.- Tek bir istek, aynı dönüşüm için birden fazla işlem içeriyorsa
DUPLICATE_CALL_CONVERSION_IN_REQUESThatası döndürülür.
- Tek bir istek, aynı dönüşüm için birden fazla işlem içeriyorsa
Telefon araması dönüşümü yükleme
Çevrimdışı arama dönüşümlerinizi bir dönüşüm işlemiyle ilişkilendirmek için şu bilgilere ihtiyacınız vardır: arayan kimliği (telefon numarası), dönüşüm tarihi saati, dönüşüm işlemi kaynak adı ve isteğe bağlı olarak ConversionUploadService için dönüşüm değeri ve para birimi.
Farklı girişler hakkında daha fazla bilgi için Yardım Merkezi makalemize göz atın. Kod örneğinde, farklı girişlerin biçimleri de açıklanmaktadır.
Koşullar
CallConversion yüklenirken karşılanması gereken birkaç gereksinim vardır.
ConversionUploadError.INVALID_CONVERSION_ACTION hatasını önlemek için conversion_action özelliği, aşağıdaki durumlarda bir ConversionAction değerine referans vermelidir:
ConversionActionTypedeğeri:UPLOAD_CALLS.ConversionActionöğesininstatuskısmıENABLED. Aksi takdirde işlemNO_CONVERSION_ACTION_FOUNDhatası vererek başarısız olur.ConversionAction, tıklamanın Google Ads hesabının Google Ads dönüşüm müşterisinde bulunur.
Ayrıca ConversionAction.category için dönüşümlerinizi en iyi tanımlayan kategoriyi belirlemenizi öneririz.
Ayrıca, aşağıdaki koşulların karşılanması gerekir:
Arama sırasında dönüşüm izleme, çağrıya ait Google Ads hesabının Google Ads dönüşüm müşterisinde etkinleştirildi.
UploadCallConversionsRequestöğesinincustomer_iddeğeri, çağrıya ait Google Ads hesabına ait Google Ads dönüşüm müşterisinin müşteri kimliği olmalıdır. Aksi takdirde, dönüşüm yükleme işlemiConversionUploadError.INVALID_CUSTOMER_FOR_CALLhatasına neden olur.conversion_valuedeğeri sıfırdan büyük veya sıfıra eşit olmalıdır.conversion_date_timeiçin saat dilimi belirtilmelidir ve biçimyyyy-mm-dd HH:mm:ss+|-HH:mmşeklinde olmalıdır. Örneğin:2022-01-01 19:32:45-05:00(yaz saati uygulaması göz ardı edilir). Saat dilimi, geçerli herhangi bir değer için olabilir: Hesabın saat dilimiyle eşleşmesi gerekmez.
Kod örneği
Java
private void runExample(
GoogleAdsClient googleAdsClient,
long customerId,
String conversionActionId,
String callerId,
String callStartDateTime,
double conversionValue,
Long conversionCustomVariableId,
String conversionCustomVariableValue,
ConsentStatus adUserDataConsent) {
// Create a call conversion by specifying currency as USD.
CallConversion.Builder conversionBuilder =
CallConversion.newBuilder()
.setConversionAction(conversionActionId)
.setCallerId(callerId)
.setCallStartDateTime(callStartDateTime)
.setConversionValue(conversionValue)
.setCurrencyCode("USD");
if (conversionCustomVariableId != null && conversionCustomVariableValue != null) {
conversionBuilder.addCustomVariables(
CustomVariable.newBuilder()
.setConversionCustomVariable(
ResourceNames.conversionCustomVariable(customerId, conversionCustomVariableId))
.setValue(conversionCustomVariableValue));
}
// Sets the consent information, if provided.
if (adUserDataConsent != null) {
// Specifies whether user consent was obtained for the data you are uploading. See
// https://www.google.com/about/company/user-consent-policy for details.
conversionBuilder.setConsent(Consent.newBuilder().setAdUserData(adUserDataConsent));
}
CallConversion conversion = conversionBuilder.build();
// Uploads the call conversion to the API.
try (ConversionUploadServiceClient conversionUploadServiceClient =
googleAdsClient.getLatestVersion().createConversionUploadServiceClient()) {
// Partial failure MUST be enabled for this request.
// NOTE: This request contains a single conversion as a demonstration. However, if you have
// multiple conversions to upload, it's best to upload multiple conversions per request
// instead of sending a separate request per conversion. See the following for per-request
// limits:
// https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
UploadCallConversionsResponse response =
conversionUploadServiceClient.uploadCallConversions(
UploadCallConversionsRequest.newBuilder()
.setCustomerId(String.valueOf(customerId))
.setCustomerId(Long.toString(customerId))
.addConversions(conversion)
.setPartialFailure(true)
.build());
// Prints any partial failure errors returned.
if (response.hasPartialFailureError()) {
GoogleAdsFailure googleAdsFailure =
ErrorUtils.getInstance().getGoogleAdsFailure(response.getPartialFailureError());
googleAdsFailure
.getErrorsList()
.forEach(e -> System.out.println("Partial failure occurred: " + e.getMessage()));
throw new RuntimeException(
"Partial failure occurred " + response.getPartialFailureError().getMessage());
}
// Prints the result if valid.
CallConversionResult result = response.getResults(0);
System.out.printf(
"Uploaded call conversion that occurred at '%' for caller ID '%' to the conversion"
+ " action with resource name '%'.%n",
result.getCallStartDateTime(), result.getCallerId(), result.getConversionAction());
}
}
C#
public void Run(GoogleAdsClient client, long customerId,
long conversionActionId, string callerId, string callStartTime,
string conversionTime, double conversionValue,
long? conversionCustomVariableId, string conversionCustomVariableValue,
ConsentStatus? adUserDataConsent)
{
// Get the ConversionUploadService.
ConversionUploadServiceClient conversionUploadService =
client.GetService(Services.V16.ConversionUploadService);
// Create a call conversion by specifying currency as USD.
CallConversion callConversion = new CallConversion()
{
ConversionAction = ResourceNames.ConversionAction(customerId, conversionActionId),
CallerId = callerId,
CallStartDateTime = callStartTime,
ConversionDateTime = conversionTime,
ConversionValue = conversionValue,
CurrencyCode = "USD",
};
if (adUserDataConsent != null)
{
// Specifies whether user consent was obtained for the data you are uploading. See
// https://www.google.com/about/company/user-consent-policy
// for details.
callConversion.Consent = new Consent()
{
AdUserData = (ConsentStatus)adUserDataConsent
};
}
if (conversionCustomVariableId != null &&
!string.IsNullOrEmpty(conversionCustomVariableValue))
{
callConversion.CustomVariables.Add(new CustomVariable()
{
ConversionCustomVariable = ResourceNames.ConversionCustomVariable(
customerId, conversionCustomVariableId.Value),
Value = conversionCustomVariableValue
});
}
UploadCallConversionsRequest request = new UploadCallConversionsRequest()
{
CustomerId = customerId.ToString(),
Conversions = { callConversion },
PartialFailure = true
};
try
{
// Issues a request to upload the call conversion. The partialFailure parameter
// is set to true, and validateOnly parameter to false as required by this method
// call.
// NOTE: This request contains a single conversion as a demonstration. However, if
// you have multiple conversions to upload, it's best to upload multiple conversions
// per request instead of sending a separate request per conversion. See the
// following for per-request limits:
// https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
UploadCallConversionsResponse response =
conversionUploadService.UploadCallConversions(request);
// Since we set partialFailure = true, we can retrieve error messages (if any) from
// the operation response.
if (response.PartialFailureError != null)
{
Console.WriteLine("Call conversion upload failed.");
// Retrieves the errors from the partial failure and prints them.
List<GoogleAdsError> errors =
response.PartialFailure.GetErrorsByOperationIndex(0);
foreach (GoogleAdsError error in errors)
{
Console.WriteLine($"Operation failed with error: {error}.");
}
}
else
{
// Prints the result.
CallConversionResult uploadedCallConversion = response.Results[0];
Console.WriteLine($"Uploaded call conversion that occurred at " +
$"'{uploadedCallConversion.CallStartDateTime}' for caller ID " +
$"'{uploadedCallConversion.CallerId}' to the conversion action with " +
$"resource name '{uploadedCallConversion.ConversionAction}'.");
}
}
catch (GoogleAdsException e)
{
Console.WriteLine("Failure:");
Console.WriteLine($"Message: {e.Message}");
Console.WriteLine($"Failure: {e.Failure}");
Console.WriteLine($"Request ID: {e.RequestId}");
throw;
}
}
PHP
public static function runExample(
GoogleAdsClient $googleAdsClient,
int $customerId,
int $conversionActionId,
string $callerId,
string $callStartDateTime,
string $conversionDateTime,
float $conversionValue,
?string $conversionCustomVariableId,
?string $conversionCustomVariableValue,
?int $adUserDataConsent
) {
// Creates a call conversion by specifying currency as USD.
$callConversion = new CallConversion([
'conversion_action' =>
ResourceNames::forConversionAction($customerId, $conversionActionId),
'caller_id' => $callerId,
'call_start_date_time' => $callStartDateTime,
'conversion_date_time' => $conversionDateTime,
'conversion_value' => $conversionValue,
'currency_code' => 'USD'
]);
if (!is_null($conversionCustomVariableId) && !is_null($conversionCustomVariableValue)) {
$callConversion->setCustomVariables([new CustomVariable([
'conversion_custom_variable' => ResourceNames::forConversionCustomVariable(
$customerId,
$conversionCustomVariableId
),
'value' => $conversionCustomVariableValue
])]);
}
// Sets the consent information, if provided.
if (!empty($adUserDataConsent)) {
// Specifies whether user consent was obtained for the data you are uploading. See
// https://www.google.com/about/company/user-consent-policy for details.
$callConversion->setConsent(new Consent(['ad_user_data' => $adUserDataConsent]));
}
// Issues a request to upload the call conversion.
$conversionUploadServiceClient = $googleAdsClient->getConversionUploadServiceClient();
// NOTE: This request contains a single conversion as a demonstration. However, if you have
// multiple conversions to upload, it's best to upload multiple conversions per request
// instead of sending a separate request per conversion. See the following for per-request
// limits:
// https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
$response = $conversionUploadServiceClient->uploadCallConversions(
// Partial failure MUST be enabled for this request.
UploadCallConversionsRequest::build($customerId, [$callConversion], true)
);
// Prints the status message if any partial failure error is returned.
// Note: The details of each partial failure error are not printed here, you can refer to
// the example HandlePartialFailure.php to learn more.
if ($response->hasPartialFailureError()) {
printf(
"Partial failures occurred: '%s'.%s",
$response->getPartialFailureError()->getMessage(),
PHP_EOL
);
} else {
// Prints the result if exists.
/** @var CallConversionResult $uploadedCallConversion */
$uploadedCallConversion = $response->getResults()[0];
printf(
"Uploaded call conversion that occurred at '%s' for caller ID '%s' to the "
. "conversion action with resource name '%s'.%s",
$uploadedCallConversion->getCallStartDateTime(),
$uploadedCallConversion->getCallerId(),
$uploadedCallConversion->getConversionAction(),
PHP_EOL
);
}
}
Python
def main(
client,
customer_id,
conversion_action_id,
caller_id,
call_start_date_time,
conversion_date_time,
conversion_value,
conversion_custom_variable_id,
conversion_custom_variable_value,
ad_user_data_consent,
):
"""Imports offline call conversion values for calls related to your ads.
Args:
client: An initialized GoogleAdsClient instance.
customer_id: The client customer ID string.
conversion_action_id: The ID of the conversion action to upload to.
caller_id: The caller ID from which this call was placed. Caller ID is
expected to be in E.164 format with preceding '+' sign,
e.g. '+18005550100'.
call_start_date_time: The date and time at which the call occurred. The
format is 'yyyy-mm-dd hh:mm:ss+|-hh:mm',
e.g. '2021-01-01 12:32:45-08:00'.
conversion_date_time: The the date and time of the conversion (should be
after the click time). The format is 'yyyy-mm-dd hh:mm:ss+|-hh:mm',
e.g. '2021-01-01 12:32:45-08:00'.
conversion_value: The conversion value in the desired currency.
conversion_custom_variable_id: The ID of the conversion custom
variable to associate with the upload.
conversion_custom_variable_value: The str value of the conversion custom
variable to associate with the upload.
ad_user_data_consent: The consent status for ad user data for all
members in the job.
"""
# Get the ConversionUploadService client.
conversion_upload_service = client.get_service("ConversionUploadService")
# Create a call conversion in USD currency.
call_conversion = client.get_type("CallConversion")
call_conversion.conversion_action = client.get_service(
"ConversionActionService"
).conversion_action_path(customer_id, conversion_action_id)
call_conversion.caller_id = caller_id
call_conversion.call_start_date_time = call_start_date_time
call_conversion.conversion_date_time = conversion_date_time
call_conversion.conversion_value = conversion_value
call_conversion.currency_code = "USD"
if conversion_custom_variable_id and conversion_custom_variable_value:
conversion_custom_variable = client.get_type("CustomVariable")
conversion_custom_variable.conversion_custom_variable = (
conversion_custom_variable_id
)
conversion_custom_variable.value = conversion_custom_variable_value
call_conversion.custom_variables.append(conversion_custom_variable)
# Specifies whether user consent was obtained for the data you are
# uploading. For more details. see:
# https://www.google.com/about/company/user-consent-policy
if ad_user_data_consent:
call_conversion.consent.ad_user_data = client.enums.ConsentStatusEnum[
ad_user_data_consent
]
# Issue a request to upload the call conversion.
# Partial failure MUST be enabled for this request.
request = client.get_type("UploadCallConversionsRequest")
request.customer_id = customer_id
request.conversions = [call_conversion]
request.partial_failure = True
# NOTE: This request only uploads a single conversion, but if you have
# multiple conversions to upload, it's most efficient to upload them in a
# single request. See the following for per-request limits for reference:
# https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
upload_call_conversions_response = (
conversion_upload_service.upload_call_conversions(request=request)
)
# Print any partial errors returned.
if upload_call_conversions_response.partial_failure_error:
print(
"Partial error occurred: "
f"'{upload_call_conversions_response.partial_failure_error.message}'"
)
# Print the result if valid.
uploaded_call_conversion = upload_call_conversions_response.results[0]
if uploaded_call_conversion.call_start_date_time:
print(
"Uploaded call conversion that occurred at "
f"'{uploaded_call_conversion.call_start_date_time}' "
f"for caller ID '{uploaded_call_conversion.caller_id}' "
"to the conversion action with resource name "
f"'{uploaded_call_conversion.conversion_action}'."
)
Ruby
def upload_call_conversion(
customer_id,
conversion_action_id,
caller_id,
call_start_date_time,
conversion_date_time,
conversion_value,
conversion_custom_variable_id,
conversion_custom_variable_value,
ad_user_data_consent)
# GoogleAdsClient will read a config file from
# ENV['HOME']/google_ads_config.rb when called without parameters
client = Google::Ads::GoogleAds::GoogleAdsClient.new
# Create a call conversion by specifying currency as USD.
call_conversion = client.resource.call_conversion do |c|
c.conversion_action = client.path.conversion_action(
customer_id, conversion_action_id)
c.caller_id = caller_id
c.call_start_date_time = call_start_date_time
c.conversion_date_time = conversion_date_time
c.conversion_value = conversion_value
c.currency_code = "USD"
if conversion_custom_variable_id && conversion_custom_variable_value
c.custom_variables << client.resource.custom_variable do |cv|
cv.conversion_custom_variable = client.path.conversion_custom_variable(
customer_id, conversion_custom_variable_id)
cv.value = conversion_custom_variable_value
end
end
unless ad_user_data_consent.nil?
c.consent = client.resource.consent do |c|
# Specifies whether user consent was obtained for the data you are
# uploading. For more details, see:
# https://www.google.com/about/company/user-consent-policy
c.ad_user_data = ad_user_data_consent
end
end
end
# Issues a request to upload the call conversion.
response = client.service.conversion_upload.upload_call_conversions(
customer_id: customer_id,
# NOTE: This request only uploads a single conversion, but if you have
# multiple conversions to upload, it's most efficient to upload them in a
# single request. See the following for per-request limits for reference:
# https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
conversions: [call_conversion],
partial_failure: true
)
# Prints errors if any partial failure error is returned.
if response.partial_failure_error
failures = client.decode_partial_failure_error(response.partial_failure_error)
failures.each do |failure|
failure.errors.each do |error|
human_readable_error_path = error
.location
.field_path_elements
.map { |location_info|
if location_info.index
"#{location_info.field_name}[#{location_info.index}]"
else
"#{location_info.field_name}"
end
}.join(" > ")
errmsg = "error occured while adding operations " \
"#{human_readable_error_path}" \
" with value: #{error.trigger.string_value}" \
" because #{error.message.downcase}"
puts errmsg
end
end
else
# Print the result if valid.
uploaded_call_conversion = response.results.first
puts "Uploaded call conversion that occurred at " \
"#{uploaded_call_conversion.call_start_date_time} " \
"for caller ID " \
"#{uploaded_call_conversion.caller_id} " \
"to the conversion action with resource name " \
"#{uploaded_call_conversion.conversion_action}"
end
end
Perl
sub upload_call_conversion {
my (
$api_client, $customer_id,
$conversion_action_id, $caller_id,
$call_start_date_time, $conversion_date_time,
$conversion_value, $conversion_custom_variable_id,
$conversion_custom_variable_value, $ad_user_data_consent
) = @_;
# Create a call conversion by specifying currency as USD.
my $call_conversion =
Google::Ads::GoogleAds::V16::Services::ConversionUploadService::CallConversion
->new({
conversionAction =>
Google::Ads::GoogleAds::V16::Utils::ResourceNames::conversion_action(
$customer_id, $conversion_action_id
),
callerId => $caller_id,
callStartDateTime => $call_start_date_time,
conversionDateTime => $conversion_date_time,
conversionValue => $conversion_value,
currencyCode => "USD"
});
if ($conversion_custom_variable_id && $conversion_custom_variable_value) {
$call_conversion->{customVariables} = [
Google::Ads::GoogleAds::V16::Services::ConversionUploadService::CustomVariable
->new({
conversionCustomVariable =>
Google::Ads::GoogleAds::V16::Utils::ResourceNames::conversion_custom_variable(
$customer_id, $conversion_custom_variable_id
),
value => $conversion_custom_variable_value
})];
}
# Set the consent information, if provided.
if ($ad_user_data_consent) {
# Specify whether user consent was obtained for the data you are uploading.
# See https://www.google.com/about/company/user-consent-policy for details.
$call_conversion->{consent} =
Google::Ads::GoogleAds::V16::Common::Consent->new({
adUserData => $ad_user_data_consent
});
}
# Issue a request to upload the call conversion.
# NOTE: This request contains a single conversion as a demonstration.
# However, if you have multiple conversions to upload, it's best to
# upload multiple conversions per request instead of sending a separate
# request per conversion. See the following for per-request limits:
# https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
my $upload_call_conversions_response =
$api_client->ConversionUploadService()->upload_call_conversions({
customerId => $customer_id,
conversions => [$call_conversion],
partialFailure => "true"
});
# Print any partial errors returned.
if ($upload_call_conversions_response->{partialFailureError}) {
printf "Partial error encountered: '%s'.\n",
$upload_call_conversions_response->{partialFailureError}{message};
}
# Print the result if valid.
my $uploaded_call_conversion =
$upload_call_conversions_response->{results}[0];
if (%$uploaded_call_conversion) {
printf "Uploaded call conversion that occurred at '%s' " .
"for caller ID '%s' to the conversion action with resource name '%s'.\n",
$uploaded_call_conversion->{callStartDateTime},
$uploaded_call_conversion->{callerId},
$uploaded_call_conversion->{conversionAction};
}
return 1;
}