Klick-Conversions hochladen

Mit der Google Ads API können Sie Offline-Klicks Conversions in Google Ads um Anzeigen zu erfassen, die zu Offlineverkäufen geführt haben, z. B. über oder über einen Vertriebsmitarbeiter.

Einrichtung

Damit Offline-Conversions richtig eingerichtet werden können, müssen bestimmte Voraussetzungen erfüllt sein. Achten Sie darauf, müssen alle Voraussetzungen erfüllt sein, bevor Sie mit der Implementierung fortfahren:

1. Aktivieren Sie Conversion-Tracking für Ihren Google Ads-Conversion-Kunden.

2. Konfigurieren Sie Tagging und speichern Sie Klick-IDs.

1. Conversion-Tracking für den Google Ads-Conversion-Kunden aktivieren

Wenn Sie die Conversions ausgeführt haben, beginnen Sie und das Conversion-Tracking muss aktiviert sein. können Sie mit Schritt 2: Tagging konfigurieren fortfahren.

Informationen zur Einrichtung des Conversion-Trackings abrufen

Sie können die Einrichtung des Conversion-Trackings in Ihrem Konto prüfen und die Conversion bestätigen. Tracking wird durch Abfrage der Ressource Customer aktiviert für die ConversionTrackingSetting. Senden Sie die folgende Abfrage mit GoogleAdsService.SearchStream:

SELECT
  customer.conversion_tracking_setting.google_ads_conversion_customer,
  customer.conversion_tracking_setting.conversion_tracking_status,
  customer.conversion_tracking_setting.conversion_tracking_id,
  customer.conversion_tracking_setting.cross_account_conversion_tracking_id
FROM customer

Das Feld google_ads_conversion_customer gibt das Google Ads-Konto an, erstellt und verwaltet Conversions für diesen Kunden. Für Kunden mit kontoübergreifendem Conversion-Tracking ist dies die ID eines Verwaltungskontos. Die Kundennummer für Google Ads-Conversions muss in Google Ads API-Anfragen als customer_id angegeben, um Conversions zu erstellen und zu verwalten. Beachten Sie, dass dieses Feld auch dann ausgefüllt wird, wenn das Conversion-Tracking nicht aktiviert ist.

Die conversion_tracking_status gibt an, ob Conversion-Tracking aktiviert ist und ob das Konto verwendet kontoübergreifendes Conversion-Tracking.

Conversion-Aktion unter „Google Ads-Conversion-Kunde“ erstellen

Wenn der Wert von conversion_tracking_status NOT_CONVERSION_TRACKED ist, Conversion-Tracking ist für dieses Konto nicht aktiviert. Conversion-Tracking aktivieren durch Erstellen von mindestens einem ConversionAction in Google Ads-Conversion-Konto verknüpft, wie im folgenden Beispiel gezeigt. Alternativ können Sie können Sie eine Conversion-Aktion erstellen, indem Sie der Anleitung im Hilfe für die Conversion-Typ auswählen, den Sie aktivieren möchten.

Erweiterte Conversions sind automatisch aktiviert, wenn sie über das Google Ads API, können aber über die Google Ads-Benutzeroberfläche deaktiviert werden.

private void runExample(GoogleAdsClient googleAdsClient, long customerId) {

  // Creates a ConversionAction.
  ConversionAction conversionAction =
      ConversionAction.newBuilder()
          // Note that conversion action names must be unique. If a conversion action already
          // exists with the specified conversion_action_name the create operation will fail with
          // a ConversionActionError.DUPLICATE_NAME error.
          .setName("Earth to Mars Cruises Conversion #" + getPrintableDateTime())
          .setCategory(ConversionActionCategory.DEFAULT)
          .setType(ConversionActionType.WEBPAGE)
          .setStatus(ConversionActionStatus.ENABLED)
          .setViewThroughLookbackWindowDays(15L)
          .setValueSettings(
              ValueSettings.newBuilder()
                  .setDefaultValue(23.41)
                  .setAlwaysUseDefaultValue(true)
                  .build())
          .build();

  // Creates the operation.
  ConversionActionOperation operation =
      ConversionActionOperation.newBuilder().setCreate(conversionAction).build();

  try (ConversionActionServiceClient conversionActionServiceClient =
      googleAdsClient.getLatestVersion().createConversionActionServiceClient()) {
    MutateConversionActionsResponse response =
        conversionActionServiceClient.mutateConversionActions(
            Long.toString(customerId), Collections.singletonList(operation));
    System.out.printf("Added %d conversion actions:%n", response.getResultsCount());
    for (MutateConversionActionResult result : response.getResultsList()) {
      System.out.printf(
          "New conversion action added with resource name: '%s'%n", result.getResourceName());
    }
  }
}
AddConversionAction.java
      

public void Run(GoogleAdsClient client, long customerId)
{
    // Get the ConversionActionService.
    ConversionActionServiceClient conversionActionService =
        client.GetService(Services.V17.ConversionActionService);

    // Note that conversion action names must be unique.
    // If a conversion action already exists with the specified name the create operation
    // will fail with a ConversionAction.DUPLICATE_NAME error.
    string ConversionActionName = "Earth to Mars Cruises Conversion #"
        + ExampleUtilities.GetRandomString();

    // Add a conversion action.
    ConversionAction conversionAction = new ConversionAction()
    {
        Name = ConversionActionName,
        Category = ConversionActionCategory.Default,
        Type = ConversionActionType.Webpage,
        Status = ConversionActionStatus.Enabled,
        ViewThroughLookbackWindowDays = 15,
        ValueSettings = new ConversionAction.Types.ValueSettings()
        {
            DefaultValue = 23.41,
            AlwaysUseDefaultValue = true
        }
    };

    // Create the operation.
    ConversionActionOperation operation = new ConversionActionOperation()
    {
        Create = conversionAction
    };

    try
    {
        // Create the conversion action.
        MutateConversionActionsResponse response =
            conversionActionService.MutateConversionActions(customerId.ToString(),
                    new ConversionActionOperation[] { operation });

        // Display the results.
        foreach (MutateConversionActionResult newConversionAction in response.Results)
        {
            Console.WriteLine($"New conversion action with resource name = " +
                $"'{newConversionAction.ResourceName}' was added.");
        }
    }
    catch (GoogleAdsException e)
    {
        Console.WriteLine("Failure:");
        Console.WriteLine($"Message: {e.Message}");
        Console.WriteLine($"Failure: {e.Failure}");
        Console.WriteLine($"Request ID: {e.RequestId}");
        throw;
    }
}
AddConversionAction.cs
      

public static function runExample(GoogleAdsClient $googleAdsClient, int $customerId)
{
    // Creates a conversion action.
    $conversionAction = new ConversionAction([
        // Note that conversion action names must be unique.
        // If a conversion action already exists with the specified conversion_action_name
        // the create operation will fail with a ConversionActionError.DUPLICATE_NAME error.
        'name' => 'Earth to Mars Cruises Conversion #' . Helper::getPrintableDatetime(),
        'category' => ConversionActionCategory::PBDEFAULT,
        'type' => ConversionActionType::WEBPAGE,
        'status' => ConversionActionStatus::ENABLED,
        'view_through_lookback_window_days' => 15,
        'value_settings' => new ValueSettings([
            'default_value' => 23.41,
            'always_use_default_value' => true
        ])
    ]);

    // Creates a conversion action operation.
    $conversionActionOperation = new ConversionActionOperation();
    $conversionActionOperation->setCreate($conversionAction);

    // Issues a mutate request to add the conversion action.
    $conversionActionServiceClient = $googleAdsClient->getConversionActionServiceClient();
    $response = $conversionActionServiceClient->mutateConversionActions(
        MutateConversionActionsRequest::build($customerId, [$conversionActionOperation])
    );

    printf("Added %d conversion actions:%s", $response->getResults()->count(), PHP_EOL);

    foreach ($response->getResults() as $addedConversionAction) {
        /** @var ConversionAction $addedConversionAction */
        printf(
            "New conversion action added with resource name: '%s'%s",
            $addedConversionAction->getResourceName(),
            PHP_EOL
        );
    }
}
AddConversionAction.php
      

def main(client, customer_id):
    conversion_action_service = client.get_service("ConversionActionService")

    # Create the operation.
    conversion_action_operation = client.get_type("ConversionActionOperation")

    # Create conversion action.
    conversion_action = conversion_action_operation.create

    # Note that conversion action names must be unique. If a conversion action
    # already exists with the specified conversion_action_name, the create
    # operation will fail with a ConversionActionError.DUPLICATE_NAME error.
    conversion_action.name = f"Earth to Mars Cruises Conversion {uuid.uuid4()}"
    conversion_action.type_ = (
        client.enums.ConversionActionTypeEnum.UPLOAD_CLICKS
    )
    conversion_action.category = (
        client.enums.ConversionActionCategoryEnum.DEFAULT
    )
    conversion_action.status = client.enums.ConversionActionStatusEnum.ENABLED
    conversion_action.view_through_lookback_window_days = 15

    # Create a value settings object.
    value_settings = conversion_action.value_settings
    value_settings.default_value = 15.0
    value_settings.always_use_default_value = True

    # Add the conversion action.
    conversion_action_response = (
        conversion_action_service.mutate_conversion_actions(
            customer_id=customer_id,
            operations=[conversion_action_operation],
        )
    )

    print(
        "Created conversion action "
        f'"{conversion_action_response.results[0].resource_name}".'
    )
add_conversion_action.py
      

def add_conversion_action(customer_id)
  # GoogleAdsClient will read a config file from
  # ENV['HOME']/google_ads_config.rb when called without parameters
  client = Google::Ads::GoogleAds::GoogleAdsClient.new


  # Add a conversion action.
  conversion_action = client.resource.conversion_action do |ca|
    ca.name = "Earth to Mars Cruises Conversion #{(Time.new.to_f * 100).to_i}"
    ca.type = :UPLOAD_CLICKS
    ca.category = :DEFAULT
    ca.status = :ENABLED
    ca.view_through_lookback_window_days = 15

    # Create a value settings object.
    ca.value_settings = client.resource.value_settings do |vs|
      vs.default_value = 15
      vs.always_use_default_value = true
    end
  end

  # Create the operation.
  conversion_action_operation = client.operation.create_resource.conversion_action(conversion_action)

  # Add the ad group ad.
  response = client.service.conversion_action.mutate_conversion_actions(
    customer_id: customer_id,
    operations: [conversion_action_operation],
  )

  puts "New conversion action with resource name = #{response.results.first.resource_name}."
end
add_conversion_action.rb
      

sub add_conversion_action {
  my ($api_client, $customer_id) = @_;

  # Note that conversion action names must be unique.
  # If a conversion action already exists with the specified conversion_action_name,
  # the create operation fails with error ConversionActionError.DUPLICATE_NAME.
  my $conversion_action_name = "Earth to Mars Cruises Conversion #" . uniqid();

  # Create a conversion action.
  my $conversion_action =
    Google::Ads::GoogleAds::V17::Resources::ConversionAction->new({
      name                          => $conversion_action_name,
      category                      => DEFAULT,
      type                          => WEBPAGE,
      status                        => ENABLED,
      viewThroughLookbackWindowDays => 15,
      valueSettings                 =>
        Google::Ads::GoogleAds::V17::Resources::ValueSettings->new({
          defaultValue          => 23.41,
          alwaysUseDefaultValue => "true"
        })});

  # Create a conversion action operation.
  my $conversion_action_operation =
    Google::Ads::GoogleAds::V17::Services::ConversionActionService::ConversionActionOperation
    ->new({create => $conversion_action});

  # Add the conversion action.
  my $conversion_actions_response =
    $api_client->ConversionActionService()->mutate({
      customerId => $customer_id,
      operations => [$conversion_action_operation]});

  printf "New conversion action added with resource name: '%s'.\n",
    $conversion_actions_response->{results}[0]{resourceName};

  return 1;
}
add_conversion_action.pl
      

Vorhandene Conversion-Aktion abrufen

Sie können Details zu einer Conversion-Aktion abrufen, indem Sie den folgenden Abfrage aus. Achten Sie darauf, dass die Kundennummer in der Anfrage auf die Google Ads- Conversion-Kunde, den Sie oben angegeben haben, und der Typ der Conversion-Aktion festgelegt ist in das richtige ConversionActionType Wert.

SELECT
  conversion_action.resource_name,
  conversion_action.name,
  conversion_action.status
FROM conversion_action
WHERE conversion_action.type = 'INSERT_CONVERSION_ACTION_TYPE'

2. Tagging konfigurieren und Klick-IDs speichern

Folgen Sie dieser Anleitung, um Aktivieren Sie die automatische Tag-Kennzeichnung und richten Sie Ihr Google Ads-Konto, Ihre Website und Lead-Tracking-System zur Erfassung und Speicherung der GCLID, GBRAID oder WBRAID jedes Impressionen und Klicks für Ihre Anzeigen. Automatisches Tagging ist standardmäßig für neue Konten.

Erstellen Sie die Anfrage

Folgen Sie der Anleitung unten, um Ihre UploadClickConversionsRequest und legen Sie für die Felder die entsprechenden Werte fest.

customer_id

Bezeichnet das Google Ads-Konto des Uploads. Legen Sie hier die Google Ads- Conversion-Kunde Konto, aus dem die Klicks stammen.

job_id

Stellt einen Mechanismus zum Verknüpfen Ihrer Uploadanfragen mit dem jeweiligen Job bereit Informationen in Offlinedatendiagnose.

Wenn Sie dieses Feld nicht festlegen, weist die Google Ads API jeder Anfrage einen eindeutigen Wert zu im Bereich von [2^31, 2^63). Wenn Sie mehrere Anfragen gruppieren möchten, zu einem einzelnen logischen Job machen, legen Sie für dieses Feld denselben Wert im Bereich fest [0, 2^31) für jede Anfrage im Job.

Den job_id in der Antwort enthält die Job-ID für die Anfrage, unabhängig davon, ob Sie einen oder die Google Ads API einen Wert zuweisen lassen.

partial_failure_enabled

Bestimmt, wie die Google Ads API mit Fehlern in operativen Abläufen umgeht.

Dieses Feld muss auf true festgelegt werden. Teilfehler verfolgen Richtlinien bei der Verarbeitung der Antwort.

debug_enabled

Bestimmt das Verhalten bei Fehlerberichten für erweiterte Conversions für Leads hochladen. Die Die Google Ads API ignoriert dieses Feld bei der Verarbeitung von Uploads für Klick-Conversions mithilfe von gclid, gbraid oder wbraid.

Klick-Conversion-Vorgänge erstellen

Die Sammlung von ClickConversion-Objekten in durch den UploadClickConversionRequest die Gruppe von Conversions definiert, die Sie hochladen. Folgen Sie der Anleitung unten, um jeden ClickConversion zu erstellen und festzulegen, ihre Felder auf die entsprechenden Werte.

Pflichtfelder für jeden Konvertierungsvorgang festlegen

Folgen Sie der Anleitung unten, um die Pflichtfelder von ClickConversion festzulegen in geeignete Werte umwandeln.

gclid, gbraid, wbraid

Die Kennung, die Sie zum Zeitpunkt des Klicks für die Conversion erfasst haben Klick oder Impression. Legen Sie nur eines dieser Felder fest.

conversion_date_time

Datum und Uhrzeit der Conversion.

Für den Wert muss eine Zeitzone angegeben sein und das Format muss yyyy-mm-dd HH:mm:ss+|-HH:mm, z. B. 2022-01-01 19:32:45-05:00 (Winterzeit wird ignoriert) .

Die Zeitzone kann für jeden gültigen Wert gelten: Sie muss nicht mit dem Zeitzone des Kontos. Wenn Sie jedoch Ihre hochgeladenen mit denen auf der Google Ads-Benutzeroberfläche vergleichen, sollten Sie dieselben Zeitzone Ihres Google Ads-Kontos verwenden, damit die Anzahl der Conversions übereinstimmt. Weitere Details und Beispiele finden Sie in der Hilfe und überprüfen Sie die Codes und Formate für ein Liste gültiger Zeitzonen-IDs.

user_identifiers

Lassen Sie dieses Feld leer, wenn Sie Conversions ausschließlich mit Klick-IDs hochladen. Wenn dieses festgelegt ist, behandelt Google Ads den Upload als Upload für erweiterte Conversions mehr Conversions für Leads.

conversion_action

Der Ressourcenname des ConversionAction für die Klick-Conversion.

Der type-Wert der Conversion-Aktion muss UPLOAD_CLICKS lauten und vorhanden sein im Google Ads-Conversion-Kunde des Google Ads-Kontos, das mit der klicken.

conversion_value

Der Wert der Conversion.

currency_code

Der Währungscode des conversion_value.

Optionale Felder für jeden Konvertierungsvorgang festlegen

Sehen Sie sich die Liste der optionalen Felder unten an und legen Sie sie für Ihr ClickConversion fest. nach Bedarf anpassen.

order_id

Die Transaktions-ID für die Conversion. Dieses Feld ist optional, wird aber dringend wird empfohlen. Wenn Sie ihn beim Upload festlegen, müssen Sie ihn für alle Anpassungen der Conversion.

external_attribution_data

Wenn Sie Tools von Drittanbietern oder selbst entwickelte Lösungen für das Conversion-Tracking verwenden, können Sie Google Ads nur einen Teil des Werts für die Conversion zuordnen können Sie den Wert einer Conversion auf mehrere Klicks verteilen. Extern zugeordnete Conversion ermöglichen es Ihnen, Conversions, bei denen jedem Klick ein anteiliger Wert zugeordnet wird

Wenn Sie anteilige Credits hochladen möchten, setzen Sie dieses Feld auf einen Objekt ExternalAttributionData mit Werten für external_attribution_model und external_attribution_credit

custom_variables

Die Werte für benutzerdefinierte Conversion-Variablen.

In Google Ads werden benutzerdefinierte Conversion-Variablen in Kombination mit wbraid oder gbraid.

cart_data

Sie können Einkaufswagendaten für ein ClickConversion in die Das Feld cart_data enthält der folgenden Attribute:

• merchant_id: Die ID des zugehörigen Merchant Center-Konto.
• feed_country_code: Der zweistellige Regionscode nach ISO 3166 des Händlers zentrierten Feed.
• feed_language_code: Der ISO 639-1-Sprachcode des Merchant Center-Feeds.
• local_transaction_cost: Die Summe aller Rabatte auf Transaktionsebene im currency_code von ClickConversion.
• items: Die Artikel im Einkaufswagen.

Jeder Artikel in items besteht aus den folgenden Attributen:

• product_id: Die ID des Produkt, manchmal auch als Angebots-ID oder Artikel-ID bezeichnet.
• quantity: Die Anzahl des Artikels.
• unit_price: Der Preis pro Einheit des Artikels.

conversion_environment

Gibt die Umgebung an, in der diese Conversion aufgezeichnet wurde. Beispiel: App oder das Web.

Codebeispiel

private void runExample(
    GoogleAdsClient googleAdsClient,
    long customerId,
    long conversionActionId,
    String gclid,
    String gbraid,
    String wbraid,
    String conversionDateTime,
    Double conversionValue,
    Long conversionCustomVariableId,
    String conversionCustomVariableValue,
    String orderId,
    ConsentStatus adUserDataConsent)
    throws InvalidProtocolBufferException {
  // Verifies that exactly one of gclid, gbraid, and wbraid is specified, as required.
  // See https://developers.google.com/google-ads/api/docs/conversions/upload-clicks for details.
  long numberOfIdsSpecified =
      Arrays.asList(gclid, gbraid, wbraid).stream().filter(idField -> idField != null).count();
  if (numberOfIdsSpecified != 1) {
    throw new IllegalArgumentException(
        "Exactly 1 of gclid, gbraid, or wbraid is required, but "
            + numberOfIdsSpecified
            + " ID values were provided");
  }

  // Constructs the conversion action resource name from the customer and conversion action IDs.
  String conversionActionResourceName =
      ResourceNames.conversionAction(customerId, conversionActionId);

  // Creates the click conversion.
  ClickConversion.Builder clickConversionBuilder =
      ClickConversion.newBuilder()
          .setConversionAction(conversionActionResourceName)
          .setConversionDateTime(conversionDateTime)
          .setConversionValue(conversionValue)
          .setCurrencyCode("USD");

  // Sets the single specified ID field.
  if (gclid != null) {
    clickConversionBuilder.setGclid(gclid);
  } else if (gbraid != null) {
    clickConversionBuilder.setGbraid(gbraid);
  } else {
    clickConversionBuilder.setWbraid(wbraid);
  }

  if (conversionCustomVariableId != null && conversionCustomVariableValue != null) {
    // Sets the custom variable and value, if provided.
    clickConversionBuilder.addCustomVariables(
        CustomVariable.newBuilder()
            .setConversionCustomVariable(
                ResourceNames.conversionCustomVariable(customerId, conversionCustomVariableId))
            .setValue(conversionCustomVariableValue));
  }

  if (orderId != null) {
    // Sets the order ID (unique transaction ID), if provided.
    clickConversionBuilder.setOrderId(orderId);
  }

  // Sets the consent information, if provided.
  if (adUserDataConsent != null) {
    // Specifies whether user consent was obtained for the data you are uploading. See
    // https://www.google.com/about/company/user-consent-policy for details.
    clickConversionBuilder.setConsent(Consent.newBuilder().setAdUserData(adUserDataConsent));
  }
  ClickConversion clickConversion = clickConversionBuilder.build();

  // Creates the conversion upload service client.
  try (ConversionUploadServiceClient conversionUploadServiceClient =
      googleAdsClient.getLatestVersion().createConversionUploadServiceClient()) {
    // Uploads the click conversion. Partial failure should always be set to true.

    // NOTE: This request contains a single conversion as a demonstration.  However, if you have
    // multiple conversions to upload, it's best to upload multiple conversions per request
    // instead of sending a separate request per conversion. See the following for per-request
    // limits:
    // https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
    UploadClickConversionsResponse response =
        conversionUploadServiceClient.uploadClickConversions(
            UploadClickConversionsRequest.newBuilder()
                .setCustomerId(Long.toString(customerId))
                .addConversions(clickConversion)
                // Enables partial failure (must be true).
                .setPartialFailure(true)
                .build());

    // Prints any partial errors returned.
    if (response.hasPartialFailureError()) {
      GoogleAdsFailure googleAdsFailure =
          ErrorUtils.getInstance().getGoogleAdsFailure(response.getPartialFailureError());
      // Constructs a protocol buffer printer that will print error details in a concise format.
      Printer errorPrinter = JsonFormat.printer().omittingInsignificantWhitespace();
      for (int operationIndex = 0;
          operationIndex < response.getResultsCount();
          operationIndex++) {
        ClickConversionResult conversionResult = response.getResults(operationIndex);
        if (ErrorUtils.getInstance().isPartialFailureResult(conversionResult)) {
          // Prints the errors for the failed operation.
          System.out.printf("Operation %d failed with the following errors:%n", operationIndex);
          for (GoogleAdsError resultError :
              ErrorUtils.getInstance().getGoogleAdsErrors(operationIndex, googleAdsFailure)) {
            // Prints the error with newlines and extra spaces removed.
            System.out.printf("  %s%n", errorPrinter.print(resultError));
          }
        } else {
          // Prints the information about the successful operation.
          StringBuilder clickInfoBuilder =
              new StringBuilder("conversion that occurred at ")
                  .append(String.format("'%s' ", conversionResult.getConversionDateTime()))
                  .append("with ");
          if (conversionResult.hasGclid()) {
            clickInfoBuilder.append(String.format("gclid '%s'", conversionResult.getGclid()));
          } else if (!conversionResult.getGbraid().isEmpty()) {
            clickInfoBuilder.append(String.format("gbraid '%s'", conversionResult.getGbraid()));
          } else if (!conversionResult.getWbraid().isEmpty()) {
            clickInfoBuilder.append(String.format("wbraid '%s'", conversionResult.getWbraid()));
          } else {
            clickInfoBuilder.append("no click ID");
          }
          System.out.printf("Operation %d for %s succeeded.%n", operationIndex, clickInfoBuilder);
        }
      }
    }
  }
}
UploadOfflineConversion.java
      

public void Run(GoogleAdsClient client, long customerId, long conversionActionId,
    string gclid, string gbraid, string wbraid, string conversionTime,
    double conversionValue, ConsentStatus? adUserDataConsent)
{
    // Get the ConversionActionService.
    ConversionUploadServiceClient conversionUploadService =
        client.GetService(Services.V17.ConversionUploadService);

    // Creates a click conversion by specifying currency as USD.
    ClickConversion clickConversion = new ClickConversion()
    {
        ConversionAction = ResourceNames.ConversionAction(customerId, conversionActionId),
        ConversionValue = conversionValue,
        ConversionDateTime = conversionTime,
        CurrencyCode = "USD",
    };

    // Sets the consent information, if provided.
    if (adUserDataConsent != null)
    {
        // Specifies whether user consent was obtained for the data you are uploading. See
        // https://www.google.com/about/company/user-consent-policy
        // for details.
        clickConversion.Consent = new Consent()
        {
            AdUserData = (ConsentStatus)adUserDataConsent
        };
    }

    // Verifies that exactly one of gclid, gbraid, and wbraid is specified, as required.
    // See https://developers.google.com/google-ads/api/docs/conversions/upload-clicks
    // for details.
    string[] ids = { gclid, gbraid, wbraid };
    int idCount = ids.Where(id => !string.IsNullOrEmpty(id)).Count();

    if (idCount != 1)
    {
        throw new ArgumentException($"Exactly 1 of gclid, gbraid, or wbraid is " +
            $"required, but {idCount} ID values were provided");
    }

    // Sets the single specified ID field.
    if (!string.IsNullOrEmpty(gclid))
    {
        clickConversion.Gclid = gclid;
    }
    else if (!string.IsNullOrEmpty(wbraid))
    {
        clickConversion.Wbraid = wbraid;
    }
    else if (!string.IsNullOrEmpty(gbraid))
    {
        clickConversion.Gbraid = gbraid;
    }

    try
    {
        // Issues a request to upload the click conversion.
        UploadClickConversionsResponse response =
            conversionUploadService.UploadClickConversions(
                new UploadClickConversionsRequest()
                {
                    CustomerId = customerId.ToString(),
                    Conversions = { clickConversion },
                    PartialFailure = true,
                    ValidateOnly = false
                });

        // Prints the result.
        ClickConversionResult uploadedClickConversion = response.Results[0];
        Console.WriteLine($"Uploaded conversion that occurred at " +
            $"'{uploadedClickConversion.ConversionDateTime}' from Google " +
            $"Click ID '{uploadedClickConversion.Gclid}' to " +
            $"'{uploadedClickConversion.ConversionAction}'.");
    }
    catch (GoogleAdsException e)
    {
        Console.WriteLine("Failure:");
        Console.WriteLine($"Message: {e.Message}");
        Console.WriteLine($"Failure: {e.Failure}");
        Console.WriteLine($"Request ID: {e.RequestId}");
        throw;
    }
}
UploadOfflineConversion.cs
      

public static function runExample(
    GoogleAdsClient $googleAdsClient,
    int $customerId,
    int $conversionActionId,
    ?string $gclid,
    ?string $gbraid,
    ?string $wbraid,
    ?string $orderId,
    string $conversionDateTime,
    float $conversionValue,
    ?string $conversionCustomVariableId,
    ?string $conversionCustomVariableValue,
    ?int $adUserDataConsent
) {
    // Verifies that exactly one of gclid, gbraid, and wbraid is specified, as required.
    // See https://developers.google.com/google-ads/api/docs/conversions/upload-clicks for details.
    $nonNullFields = array_filter(
        [$gclid, $gbraid, $wbraid],
        function ($field) {
            return !is_null($field);
        }
    );
    if (count($nonNullFields) !== 1) {
        throw new \UnexpectedValueException(
            sprintf(
                "Exactly 1 of gclid, gbraid or wbraid is required, but %d ID values were "
                . "provided",
                count($nonNullFields)
            )
        );
    }

    // Creates a click conversion by specifying currency as USD.
    $clickConversion = new ClickConversion([
        'conversion_action' =>
            ResourceNames::forConversionAction($customerId, $conversionActionId),
        'conversion_value' => $conversionValue,
        'conversion_date_time' => $conversionDateTime,
        'currency_code' => 'USD'
    ]);
    // Sets the single specified ID field.
    if (!is_null($gclid)) {
        $clickConversion->setGclid($gclid);
    } elseif (!is_null($gbraid)) {
        $clickConversion->setGbraid($gbraid);
    } else {
        $clickConversion->setWbraid($wbraid);
    }

    if (!is_null($conversionCustomVariableId) && !is_null($conversionCustomVariableValue)) {
        $clickConversion->setCustomVariables([new CustomVariable([
            'conversion_custom_variable' => ResourceNames::forConversionCustomVariable(
                $customerId,
                $conversionCustomVariableId
            ),
            'value' => $conversionCustomVariableValue
        ])]);
    }
    // Sets the consent information, if provided.
    if (!empty($adUserDataConsent)) {
        // Specifies whether user consent was obtained for the data you are uploading. See
        // https://www.google.com/about/company/user-consent-policy for details.
        $clickConversion->setConsent(new Consent(['ad_user_data' => $adUserDataConsent]));
    }

    if (!empty($orderId)) {
        // Sets the order ID (unique transaction ID), if provided.
        $clickConversion->setOrderId($orderId);
    }

    // Issues a request to upload the click conversion.
    $conversionUploadServiceClient = $googleAdsClient->getConversionUploadServiceClient();
    /** @var UploadClickConversionsResponse $response */
    // NOTE: This request contains a single conversion as a demonstration.  However, if you have
    // multiple conversions to upload, it's best to upload multiple conversions per request
    // instead of sending a separate request per conversion. See the following for per-request
    // limits:
    // https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
    $response = $conversionUploadServiceClient->uploadClickConversions(
        // Uploads the click conversion. Partial failure should always be set to true.
        UploadClickConversionsRequest::build($customerId, [$clickConversion], true)
    );

    // Prints the status message if any partial failure error is returned.
    // Note: The details of each partial failure error are not printed here, you can refer to
    // the example HandlePartialFailure.php to learn more.
    if ($response->hasPartialFailureError()) {
        printf(
            "Partial failures occurred: '%s'.%s",
            $response->getPartialFailureError()->getMessage(),
            PHP_EOL
        );
    } else {
        // Prints the result if exists.
        /** @var ClickConversionResult $uploadedClickConversion */
        $uploadedClickConversion = $response->getResults()[0];
        printf(
            "Uploaded click conversion that occurred at '%s' from Google Click ID '%s' " .
            "to '%s'.%s",
            $uploadedClickConversion->getConversionDateTime(),
            $uploadedClickConversion->getGclid(),
            $uploadedClickConversion->getConversionAction(),
            PHP_EOL
        );
    }
}
UploadOfflineConversion.php
      

def main(
    client,
    customer_id,
    conversion_action_id,
    gclid,
    conversion_date_time,
    conversion_value,
    conversion_custom_variable_id,
    conversion_custom_variable_value,
    gbraid,
    wbraid,
    order_id,
    ad_user_data_consent,
):
    """Creates a click conversion with a default currency of USD.

    Args:
        client: An initialized GoogleAdsClient instance.
        customer_id: The client customer ID string.
        conversion_action_id: The ID of the conversion action to upload to.
        gclid: The Google Click Identifier ID. If set, the wbraid and gbraid
            parameters must be None.
        conversion_date_time: The the date and time of the conversion (should be
            after the click time). The format is 'yyyy-mm-dd hh:mm:ss+|-hh:mm',
            e.g. '2021-01-01 12:32:45-08:00'.
        conversion_value: The conversion value in the desired currency.
        conversion_custom_variable_id: The ID of the conversion custom
            variable to associate with the upload.
        conversion_custom_variable_value: The str value of the conversion custom
            variable to associate with the upload.
        gbraid: The GBRAID for the iOS app conversion. If set, the gclid and
            wbraid parameters must be None.
        wbraid: The WBRAID for the iOS app conversion. If set, the gclid and
            gbraid parameters must be None.
        order_id: The order ID for the click conversion.
        ad_user_data_consent: The ad user data consent for the click.
    """
    click_conversion = client.get_type("ClickConversion")
    conversion_upload_service = client.get_service("ConversionUploadService")
    conversion_action_service = client.get_service("ConversionActionService")
    click_conversion.conversion_action = (
        conversion_action_service.conversion_action_path(
            customer_id, conversion_action_id
        )
    )

    # Sets the single specified ID field.
    if gclid:
        click_conversion.gclid = gclid
    elif gbraid:
        click_conversion.gbraid = gbraid
    else:
        click_conversion.wbraid = wbraid

    click_conversion.conversion_value = float(conversion_value)
    click_conversion.conversion_date_time = conversion_date_time
    click_conversion.currency_code = "USD"

    if conversion_custom_variable_id and conversion_custom_variable_value:
        conversion_custom_variable = client.get_type("CustomVariable")
        conversion_custom_variable.conversion_custom_variable = (
            conversion_upload_service.conversion_custom_variable_path(
                customer_id, conversion_custom_variable_id
            )
        )
        conversion_custom_variable.value = conversion_custom_variable_value
        click_conversion.custom_variables.append(conversion_custom_variable)

    if order_id:
        click_conversion.order_id = order_id

    # Sets the consent information, if provided.
    if ad_user_data_consent:
        # Specifies whether user consent was obtained for the data you are
        # uploading. For more details, see:
        # https://www.google.com/about/company/user-consent-policy
        click_conversion.consent.ad_user_data = client.enums.ConsentStatusEnum[
            ad_user_data_consent
        ]

    # Uploads the click conversion. Partial failure must be set to True here.
    #
    # NOTE: This request only uploads a single conversion, but if you have
    # multiple conversions to upload, it's most efficient to upload them in a
    # single request. See the following for per-request limits for reference:
    # https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
    request = client.get_type("UploadClickConversionsRequest")
    request.customer_id = customer_id
    request.conversions.append(click_conversion)
    request.partial_failure = True
    conversion_upload_response = (
        conversion_upload_service.upload_click_conversions(
            request=request,
        )
    )
    uploaded_click_conversion = conversion_upload_response.results[0]
    print(
        f"Uploaded conversion that occurred at "
        f'"{uploaded_click_conversion.conversion_date_time}" from '
        f'Google Click ID "{uploaded_click_conversion.gclid}" '
        f'to "{uploaded_click_conversion.conversion_action}"'
    )
upload_offline_conversion.py
      

def upload_offline_conversion(
  customer_id,
  conversion_action_id,
  gclid,
  gbraid,
  wbraid,
  conversion_date_time,
  conversion_value,
  conversion_custom_variable_id,
  conversion_custom_variable_value,
  ad_user_data_consent)
  # GoogleAdsClient will read a config file from
  # ENV['HOME']/google_ads_config.rb when called without parameters
  client = Google::Ads::GoogleAds::GoogleAdsClient.new

  # Verifies that exactly one of gclid, gbraid, and wbraid is specified, as required.
  # See https://developers.google.com/google-ads/api/docs/conversions/upload-clicks for details.
  identifiers_specified = [gclid, gbraid, wbraid].reject {|v| v.nil?}.count
  if identifiers_specified != 1
    raise "Must specify exactly one of GCLID, GBRAID, and WBRAID. " \
      "#{identifiers_specified} values were provided."
  end

  click_conversion = client.resource.click_conversion do |cc|
    cc.conversion_action = client.path.conversion_action(customer_id, conversion_action_id)
    # Sets the single specified ID field.
    if !gclid.nil?
      cc.gclid = gclid
    elsif !gbraid.nil?
      cc.gbraid = gbraid
    else
      cc.wbraid = wbraid
    end
    cc.conversion_value = conversion_value.to_f
    cc.conversion_date_time = conversion_date_time
    cc.currency_code = 'USD'
    if conversion_custom_variable_id && conversion_custom_variable_value
      cc.custom_variables << client.resource.custom_variable do |cv|
        cv.conversion_custom_variable = client.path.conversion_custom_variable(
          customer_id, conversion_custom_variable_id)
        cv.value = conversion_custom_variable_value
      end
    end
    # Sets the consent information, if provided.
    unless ad_user_data_consent.nil?
      cc.consent = client.resource.consent do |c|
        # Specifies whether user consent was obtained for the data you are
        # uploading. For more details, see:
        # https://www.google.com/about/company/user-consent-policy
        c.ad_user_data = ad_user_data_consent
      end
    end
  end

  response = client.service.conversion_upload.upload_click_conversions(
    customer_id: customer_id,
    # NOTE: This request contains a single conversion as a demonstration.
    # However, if you have multiple conversions to upload, it's best to upload
    # multiple conversions per request instead of sending a separate request per
    # conversion. See the following for per-request limits:
    # https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
    conversions: [click_conversion],
    partial_failure: true,
  )
  if response.partial_failure_error.nil?
    result = response.results.first
    puts "Uploaded conversion that occurred at #{result.conversion_date_time} " \
      "from Google Click ID #{result.gclid} to #{result.conversion_action}."
  else
    failures = client.decode_partial_failure_error(response.partial_failure_error)
    puts "Request failed. Failure details:"
    failures.each do |failure|
      failure.errors.each do |error|
        puts "\t#{error.error_code.error_code}: #{error.message}"
      end
    end
  end
end
upload_offline_conversion.rb
      

sub upload_offline_conversion {
  my (
    $api_client,                    $customer_id,
    $conversion_action_id,          $gclid,
    $gbraid,                        $wbraid,
    $conversion_date_time,          $conversion_value,
    $conversion_custom_variable_id, $conversion_custom_variable_value,
    $order_id,                      $ad_user_data_consent
  ) = @_;

  # Verify that exactly one of gclid, gbraid, and wbraid is specified, as required.
  # See https://developers.google.com/google-ads/api/docs/conversions/upload-clicks for details.
  my $number_of_ids_specified = grep { defined $_ } ($gclid, $gbraid, $wbraid);
  if ($number_of_ids_specified != 1) {
    die sprintf "Exactly 1 of gclid, gbraid, or wbraid is required, " .
      "but %d ID values were provided.\n",
      $number_of_ids_specified;
  }

  # Create a click conversion by specifying currency as USD.
  my $click_conversion =
    Google::Ads::GoogleAds::V17::Services::ConversionUploadService::ClickConversion
    ->new({
      conversionAction =>
        Google::Ads::GoogleAds::V17::Utils::ResourceNames::conversion_action(
        $customer_id, $conversion_action_id
        ),
      conversionDateTime => $conversion_date_time,
      conversionValue    => $conversion_value,
      currencyCode       => "USD"
    });

  # Set the single specified ID field.
  if (defined $gclid) {
    $click_conversion->{gclid} = $gclid;
  } elsif (defined $gbraid) {
    $click_conversion->{gbraid} = $gbraid;
  } else {
    $click_conversion->{wbraid} = $wbraid;
  }

  if ($conversion_custom_variable_id && $conversion_custom_variable_value) {
    $click_conversion->{customVariables} = [
      Google::Ads::GoogleAds::V17::Services::ConversionUploadService::CustomVariable
        ->new({
          conversionCustomVariable =>
            Google::Ads::GoogleAds::V17::Utils::ResourceNames::conversion_custom_variable(
            $customer_id, $conversion_custom_variable_id
            ),
          value => $conversion_custom_variable_value
        })];
  }

  if (defined $order_id) {
    # Set the order ID (unique transaction ID), if provided.
    $click_conversion->{orderId} = $order_id;
  }

  # Set the consent information, if provided.
  if ($ad_user_data_consent) {
    # Specify whether user consent was obtained for the data you are uploading.
    # See https://www.google.com/about/company/user-consent-policy for details.
    $click_conversion->{consent} =
      Google::Ads::GoogleAds::V17::Common::Consent->new({
        adUserData => $ad_user_data_consent
      });
  }

  # Issue a request to upload the click conversion. Partial failure should
  # always be set to true.
  #
  # NOTE: This request contains a single conversion as a demonstration.
  # However, if you have multiple conversions to upload, it's best to
  # upload multiple conversions per request instead of sending a separate
  # request per conversion. See the following for per-request limits:
  # https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
  my $upload_click_conversions_response =
    $api_client->ConversionUploadService()->upload_click_conversions({
      customerId     => $customer_id,
      conversions    => [$click_conversion],
      partialFailure => "true"
    });

  # Print any partial errors returned.
  if ($upload_click_conversions_response->{partialFailureError}) {
    printf "Partial error encountered: '%s'.\n",
      $upload_click_conversions_response->{partialFailureError}{message};
  }

  # Print the result if valid.
  my $uploaded_click_conversion =
    $upload_click_conversions_response->{results}[0];
  if (%$uploaded_click_conversion) {
    printf
      "Uploaded conversion that occurred at '%s' from Google Click ID '%s' " .
      "to the conversion action with resource name '%s'.\n",
      $uploaded_click_conversion->{conversionDateTime},
      $uploaded_click_conversion->{gclid},
      $uploaded_click_conversion->{conversionAction};
  }

  return 1;
}
upload_offline_conversion.pl
      

Fehlerbehebung

Die Diagnose der Offlinedaten bietet eine Ressource zur Überprüfung des Gesamtzustands Ihrer Uploads zu einem fortlaufenden zu verstehen. Während der Implementierung können Sie jedoch die Informationen in dieser um eventuell gemeldete Fehler zu untersuchen. partial_failure_error der Antwort ein.

Zu den häufigsten Fehlern beim Hochladen von Conversion-Aktionen zählen: Autorisierungsfehler wie USER_PERMISSION_DENIED. Vergewissern Sie sich, dass Sie Wenn die Kundennummer in Ihrer Anfrage auf den Google Ads-Conversion-Kunden festgelegt ist, dem die Conversion-Aktion gehört. Besuchen Sie unser Autorisierungsanleitung und lesen Sie unsere Leitfaden zu häufigen Fehlern mit Tipps dazu, um diese Fehler zu beheben.

Häufige Fehler beheben

Conversions in Berichten

Hochgeladene Conversions werden in Berichten für das Impression-Datum des und nicht das Datum der Uploadanfrage oder das Datum der conversion_date_time von ClickConversion

Es kann bis zu 3 Stunden dauern, importierte Conversion-Statistiken, die in Ihrem Google Ads-Konto für den letzten Klick zu sehen sind Namensnennung. Bei anderen Attributionsmodellen für das Suchnetzwerk kann es länger als drei Stunden. Prüfen Sie die Datenaktualität finden Sie weitere Informationen.