広告グループやキャンペーンのターゲット設定を使用して、広告の表示対象を特定のオーディエンス セグメントのみに絞り込むか、選択した特定のコンテンツに絞り込むかを指定できます。
ターゲティングを設定する
さまざまな条件タイプをターゲティングにどのように使用するかの詳細を設定するには、TargetingSetting フィールドを target_restrictions の配列に設定します。各 TargetRestriction で、条件のタイプで bid_only オプションを使用するかどうかを制御できます。
bid_only を true に設定すると、ターゲット設定は「モニタリング」に設定され、この条件はトラフィックの制限には使用されませんが、リストのユーザーごとに異なる入札単価を設定できるようになります。bid_only を false に設定すると、ターゲット設定が「ターゲティング」に設定され、広告グループのトラフィックをターゲット リストのユーザーのみに制限する条件が有効になります。
ベスト プラクティス
デフォルトでは、bid_only は false に設定されているため、ターゲット設定は「ターゲティング」に設定されます。検索キャンペーンやショッピング キャンペーンにオーディエンス セグメントを追加する場合は、bid_only のターゲット設定を true に変更して「モニタリング」に設定することを検討してください。
検索広告のオーディエンス セグメントに重複するキャンペーンを設定する場合は、bid_only のターゲティングを false のままにします。
制限
親キャンペーンで targeting_setting が設定されている場合、AdGroup で targeting_setting を追加または更新することはできません。targeting_setting が親 Campaign に設定されている場合は、まず親 Campaign の targeting_setting を削除する必要があります。同様に、Campaign に設定するには、まず AdGroup の targeting_setting を削除する必要があります。
ターゲット設定を取得する
ターゲティングが意図したとおりに設定されていることを確認するには、検索クエリの ad_group リソースの ad_group.targeting_setting.target_restrictions フィールドをリクエストして、広告グループまたはキャンペーンの targeting_setting を確認します。
例
この例では、広告グループの targeting_setting を更新して、targeting_dimension が AUDIENCE の TargetRestriction インスタンスで bid_only が true になるようにします。これにより、広告グループの広告が指定したオーディエンス セグメントのユーザーにのみ表示されるようになります。
まず、指定した ID の広告グループからすべての ad_group.targeting_setting.target_restrictions を取得します。
Java
String searchQuery =
"SELECT ad_group.id, ad_group.name, ad_group.targeting_setting.target_restrictions "
+ "FROM ad_group "
+ "WHERE ad_group.id = "
+ adGroupId;
C#
string query = $@"
SELECT ad_group.id, ad_group.name, ad_group.targeting_setting.target_restrictions
FROM ad_group
WHERE ad_group.id = {adGroupId}";
PHP
$query = "SELECT ad_group.id, ad_group.name, " .
"ad_group.targeting_setting.target_restrictions " .
"FROM ad_group " .
"WHERE ad_group.id = $adGroupId";
Python
query = f"""
SELECT
ad_group.id,
ad_group.name,
ad_group.targeting_setting.target_restrictions
FROM ad_group
WHERE ad_group.id = {ad_group_id}"""
Ruby
query = <<~QUERY
SELECT ad_group.id, ad_group.name,
ad_group.targeting_setting.target_restrictions
FROM ad_group
WHERE ad_group.id = #{ad_group_id}
QUERY
Perl
my $query = "SELECT ad_group.id, ad_group.name, " . "ad_group.targeting_setting.target_restrictions FROM ad_group " . "WHERE ad_group.id = $ad_group_id";
次に、ターゲット制限をループして、TargetingSetting オブジェクトを再構築します。targeting_dimension が AUDIENCE で bid_only の値が false である TargetRestriction が検出されると、TargetRestriction オブジェクトの bid_only フィールドが true（または「Observation」）に更新され、TargetingSetting オブジェクトに追加されます。
それ以外の場合は、サーバーから返された TargetRestriction オブジェクトを TargetingSetting に追加します。なお、TargetingSetting オブジェクト全体を再構築して Google 広告に返す必要があります。Google は、TargetingSetting にない target_restrictions はすべて削除する必要があると想定しています。
Java
for (TargetRestriction targetRestriction : targetRestrictions) {
TargetingDimension targetingDimension = targetRestriction.getTargetingDimension();
boolean bidOnly = targetRestriction.getBidOnly();
System.out.printf(
"- Targeting restriction with targeting dimension '%s' and bid only set to '%b'.%n",
targetingDimension, bidOnly);
// Adds the target restriction to the TargetingSetting object as is if the targeting
// dimension has a value other than AUDIENCE because those should not change.
if (!targetingDimension.equals(TargetingDimension.AUDIENCE)) {
targetingSettingBuilder.addTargetRestrictions(targetRestriction);
} else if (!bidOnly) {
shouldUpdateTargetingSetting = true;
// Adds an AUDIENCE target restriction with bid_only set to true to the targeting
// setting object. This has the effect of setting the AUDIENCE target restriction to
// "Observation". For more details about the targeting setting, visit
// https://support.google.com/google-ads/answer/7365594.
targetingSettingBuilder.addTargetRestrictions(
TargetRestriction.newBuilder()
.setTargetingDimensionValue(TargetingDimension.AUDIENCE_VALUE)
.setBidOnly(true));
}
}
C#
foreach (TargetRestriction targetRestriction in targetRestrictions)
{
TargetingDimension targetingDimension =
targetRestriction.TargetingDimension;
bool bidOnly = targetRestriction.BidOnly;
Console.WriteLine("\tTargeting restriction with targeting dimension " +
$"'{targetingDimension}' and bid only set to '{bidOnly}'.");
// Add the target restriction to the TargetingSetting object as is if the
// targeting dimension has a value other than AUDIENCE because those should
// not change.
if (targetingDimension != TargetingDimension.Audience)
{
targetingSetting.TargetRestrictions.Add(targetRestriction);
}
else if (!bidOnly)
{
shouldUpdateTargetingSetting = true;
// Add an AUDIENCE target restriction with bid_only set to true to the
// targeting setting object. This has the effect of setting the AUDIENCE
// target restriction to "Observation". For more details about the
// targeting setting, visit
// https://support.google.com/google-ads/answer/7365594.
targetingSetting.TargetRestrictions.Add(new TargetRestriction
{
TargetingDimension = TargetingDimension.Audience,
BidOnly = true
});
}
}
PHP
foreach (
$adGroup->getTargetingSetting()->getTargetRestrictions() as $targetRestriction
) {
// Prints the results.
$targetingDimension = $targetRestriction->getTargetingDimension();
$bidOnly = $targetRestriction->getBidOnly();
printf(
"- Targeting restriction with targeting dimension '%s' and bid only set to " .
"'%s'.%s",
TargetingDimension::name($targetingDimension),
$bidOnly ? 'true' : 'false',
PHP_EOL
);
// Adds the target restriction to the TargetingSetting object as is if the targeting
// dimension has a value other than AUDIENCE because those should not change.
if ($targetingDimension !== TargetingDimension::AUDIENCE) {
$targetRestrictions[] = $targetRestriction;
} elseif (!$bidOnly) {
$shouldUpdateTargetingSetting = true;
// Adds an AUDIENCE target restriction with bid_only set to true to the
// targeting setting object. This has the effect of setting the AUDIENCE
// target restriction to "Observation".
// For more details about the targeting setting, visit
// https://support.google.com/google-ads/answer/7365594.
$targetRestrictions[] = new TargetRestriction([
'targeting_dimension' => TargetingDimension::AUDIENCE,
'bid_only' => true
]);
}
}
Python
for target_restriction in target_restrictions:
targeting_dimension = target_restriction.targeting_dimension
bid_only = target_restriction.bid_only
print(
"\tTargeting restriction with targeting dimension "
f"'{targeting_dimension.name}' "
f"and bid only set to '{bid_only}'."
)
# Add the target restriction to the TargetingSetting object as
# is if the targeting dimension has a value other than audience
# because those should not change.
if targeting_dimension != targeting_dimension_enum.AUDIENCE:
targeting_setting.target_restrictions.append(target_restriction)
elif not bid_only:
should_update_targeting_setting = True
# Add an audience target restriction with bid_only set to
# true to the targeting setting object. This has the effect
# of setting the audience target restriction to
# "Observation". For more details about the targeting
# setting, visit
# https://support.google.com/google-ads/answer/7365594.
new_target_restriction = targeting_setting.target_restrictions.add()
new_target_restriction.targeting_dimension = (
targeting_dimension_enum.AUDIENCE
)
new_target_restriction.bid_only = True
Ruby
ad_group.targeting_setting.target_restrictions.each do |r|
# Prints the results.
targeting_dimension = r.targeting_dimension
bid_only = r.bid_only
puts "- Targeting restriction with targeting dimension " \
"#{targeting_dimension} and bid only set to #{bid_only}."
# Adds the target restriction to the TargetingSetting object as is if the
# targeting dimension has a value other than AUDIENCE because those should
# not change.
if targeting_dimension != :AUDIENCE
target_restrictions << r
elsif !bid_only
should_update_targeting_setting = true
# Adds an AUDIENCE target restriction with bid_only set to true to the
# targeting setting object. This has the effect of setting the AUDIENCE
# target restriction to "Observation".
# For more details about the targeting setting, visit
# https://support.google.com/google-ads/answer/7365594.
target_restrictions << client.resource.target_restriction do |tr|
tr.targeting_dimension = :AUDIENCE
tr.bid_only = true
end
end
end
Perl
foreach my $target_restriction (@target_restrictions) {
my $targeting_dimension = $target_restriction->{targetingDimension};
printf
"\tTargeting restriction with targeting dimension '%s' and bid " .
"only set to '%s'.\n",
$targeting_dimension,
$target_restriction->{bidOnly} ? "TRUE" : "FALSE";
# Add the target restriction to the TargetingSetting object as is if the
# targeting dimension has a value other than AUDIENCE because those
# should not change.
if ($targeting_dimension ne AUDIENCE) {
$target_restriction->{bidOnly} =
$target_restriction->{bidOnly} ? "true" : "false";
push @{$targeting_setting->{targetRestrictions}}, $target_restriction;
} elsif (!$target_restriction->{bidOnly}) {
$should_update_target_setting = 1;
# Add an AUDIENCE target restriction with bid_only set to true to the
# targeting setting object. This has the effect of setting the
# AUDIENCE target restriction to "Observation". For more details about
# the targeting setting, visit
# https://support.google.com/google-ads/answer/7365594.
my $new_restriction =
Google::Ads::GoogleAds::V16::Common::TargetRestriction->new({
targetingDimension => AUDIENCE,
bidOnly => "true"
});
push @{$targeting_setting->{targetRestrictions}}, $new_restriction;
}
}
最後に、更新が必要なターゲット制限が見つかった場合は、新しいターゲット設定で広告グループが更新されます。
Java
private void updateTargetingSetting(
GoogleAdsClient googleAdsClient,
long customerId,
long adGroupId,
TargetingSetting targetingSetting) {
// Creates the ad group service client.
try (AdGroupServiceClient adGroupServiceClient =
googleAdsClient.getLatestVersion().createAdGroupServiceClient()) {
// Creates an ad group object with the proper resource name and updated targeting setting.
AdGroup adGroup =
AdGroup.newBuilder()
.setResourceName(ResourceNames.adGroup(customerId, adGroupId))
.setTargetingSetting(targetingSetting)
.build();
// Constructs an operation that will update the ad group, using the FieldMasks utility to
// derive the update mask. This mask tells the Google Ads API which attributes of the
// ad group you want to change.
AdGroupOperation operation =
AdGroupOperation.newBuilder()
.setUpdate(adGroup)
.setUpdateMask(FieldMasks.allSetFieldsOf(adGroup))
.build();
// Sends the operation in a mutate request.
MutateAdGroupsResponse response =
adGroupServiceClient.mutateAdGroups(
Long.toString(customerId), ImmutableList.of(operation));
// Prints the resource name of the updated object.
System.out.printf(
"Updated targeting setting of ad group with resource name '%s'; set the AUDIENCE "
+ "target restriction to 'Observation'.%n",
response.getResults(0).getResourceName());
}
}
C#
private void UpdateTargetingSetting(GoogleAdsClient client, long customerId, long
adGroupId, TargetingSetting targetingSetting)
{
// Get the AdGroupService client.
AdGroupServiceClient adGroupServiceClient =
client.GetService(Services.V16.AdGroupService);
// Create an ad group object with the updated targeting setting.
AdGroup adGroup = new AdGroup
{
ResourceName = ResourceNames.AdGroup(customerId, adGroupId),
TargetingSetting = targetingSetting
};
// Construct an operation that will update the ad group, using the FieldMasks utility
// to derive the update mask. This mask tells the Google Ads API which attributes of the
// ad group you want to change.
AdGroupOperation operation = new AdGroupOperation
{
Update = adGroup,
UpdateMask = FieldMasks.AllSetFieldsOf(adGroup)
};
// Send the operation in a mutate request.
MutateAdGroupsResponse response =
adGroupServiceClient.MutateAdGroups(customerId.ToString(), new[] { operation });
// Print the resource name of the updated object.
Console.WriteLine("Updated targeting setting of ad group with resource name " +
$"'{response.Results.First().ResourceName}'; set the AUDIENCE target restriction " +
"to 'Observation'.");
}
PHP
private static function updateTargetingSetting(
GoogleAdsClient $googleAdsClient,
int $customerId,
int $adGroupId,
TargetingSetting $targetingSetting
) {
// Creates an ad group object with the proper resource name and updated targeting setting.
$adGroup = new AdGroup([
'resource_name' => ResourceNames::forAdGroup($customerId, $adGroupId),
'targeting_setting' => $targetingSetting
]);
// Constructs an operation that will update the ad group with the specified resource name,
// using the FieldMasks utility to derive the update mask. This mask tells the Google Ads
// API which attributes of the ad group you want to change.
$adGroupOperation = new AdGroupOperation();
$adGroupOperation->setUpdate($adGroup);
$adGroupOperation->setUpdateMask(FieldMasks::allSetFieldsOf($adGroup));
// Issues a mutate request to update the ad group.
$adGroupServiceClient = $googleAdsClient->getAdGroupServiceClient();
$response = $adGroupServiceClient->mutateAdGroups(
MutateAdGroupsRequest::build($customerId, [$adGroupOperation])
);
// Prints the resource name of the updated ad group.
printf(
"Updated targeting setting of ad group with resource name '%s'; set the AUDIENCE " .
"target restriction to 'Observation'.%s",
$response->getResults()[0]->getResourceName(),
PHP_EOL
);
}
Python
def update_targeting_setting(
client, customer_id, ad_group_id, targeting_setting
):
"""Updates the given TargetingSetting of an ad group.
Args:
client: The Google Ads client.
customer_id: The Google Ads customer ID.
ad_group_id: The ad group ID for which to update the audience targeting
restriction.
targeting_setting: The updated targeting setting.
"""
# Get the AdGroupService client.
ad_group_service = client.get_service("AdGroupService")
# Construct an operation that will update the ad group.
ad_group_operation = client.get_type("AdGroupOperation")
# Populate the ad group object with the updated targeting setting.
ad_group = ad_group_operation.update
ad_group.resource_name = ad_group_service.ad_group_path(
customer_id, ad_group_id
)
ad_group.targeting_setting.target_restrictions.extend(
targeting_setting.target_restrictions
)
# Use the field_mask utility to derive the update mask. This mask tells the
# Google Ads API which attributes of the ad group you want to change.
client.copy_from(
ad_group_operation.update_mask,
protobuf_helpers.field_mask(None, ad_group._pb),
)
# Send the operation in a mutate request and print the resource name of the
# updated object.
mutate_ad_groups_response = ad_group_service.mutate_ad_groups(
customer_id=customer_id, operations=[ad_group_operation]
)
print(
"Updated targeting setting of ad group with resource name "
f"'{mutate_ad_groups_response.results[0].resource_name}'; set the "
"audience target restriction to 'Observation'."
)
Ruby
def update_targeting_setting(
client,
customer_id,
ad_group_id,
targeting_setting)
# Constructs an operation that will update the ad group with the specified
# resource name.
ad_group_resource_name = client.path.ad_group(customer_id, ad_group_id)
operation = client.operation.update_resource.ad_group(ad_group_resource_name) do |ag|
ag.targeting_setting = targeting_setting
end
# Issues a mutate request to update the ad group.
response = client.service.ad_group.mutate_ad_groups(
customer_id: customer_id,
operations: [operation],
)
# Prints the resource name of the updated ad group.
puts "Updated targeting setting of ad group with resource name " \
"#{response.results.first.resource_name}; set the AUDIENCE target " \
"restriction to 'Observation'."
end
Perl
sub update_targeting_setting {
my ($api_client, $customer_id, $ad_group_id, $targeting_setting) = @_;
# Construct an ad group object with the updated targeting setting.
my $ad_group = Google::Ads::GoogleAds::V16::Resources::AdGroup->new({
resourceName =>
Google::Ads::GoogleAds::V16::Utils::ResourceNames::ad_group(
$customer_id, $ad_group_id
),
targetingSetting => $targeting_setting
});
# Create an operation that will update the ad group, using the FieldMasks
# utility to derive the update mask. This mask tells the Google Ads API which
# attributes of the ad group you want to change.
my $ad_group_operation =
Google::Ads::GoogleAds::V16::Services::AdGroupService::AdGroupOperation->
new({
update => $ad_group,
updateMask => all_set_fields_of($ad_group)});
# Send the operation in a mutate request and print the resource name of the
# updated resource.
my $ad_groups_response = $api_client->AdGroupService()->mutate({
customerId => $customer_id,
operations => [$ad_group_operation]});
printf "Updated targeting setting of ad group with resourceName " .
"'%s'; set the AUDIENCE target restriction to 'Observation'.\n",
$ad_groups_response->{results}[0]{resourceName};
}
キャンペーンの bid_only フィールドを設定する手順はほぼ同じです。