Crea esclusioni di dati

Le esclusioni di dati sono uno strumento avanzato che può essere utilizzato per indicare a Smart Bidding di ignorare tutti i dati relativi alle date in cui si sono verificati problemi con il monitoraggio delle conversioni di un account. Per ulteriori dettagli sul funzionamento delle esclusioni di dati, consulta la pagina di assistenza relativa alle esclusioni di dati.

Crea le esclusioni di dati a livello di programmazione utilizzando BiddingDataExclusions.

Ambito

BiddingDataExclusions ha un valore obbligatorio scope che può essere impostato sui seguenti valori. Vengono impostate opzioni di configurazione aggiuntive specifiche per ambito in base all'ambito utilizzato.

• CAMPAIGN: l'esclusione viene applicata a campagne specifiche. Imposta il campaigns campo su un elenco di nomi di risorse della campagna a cui verrà applicata questa esclusione.
  • Il numero massimo di campagne per BiddingDataExclusion è 2000.
• CHANNEL: l'esclusione viene applicata alle campagne che appartengono a tipi di canali specifici. Imposta il advertising_channel_types campo su un elenco di AdvertisingChannelTypes a cui verrà applicata questa esclusione.

Dispositivi

Oltre al loro ambito, le esclusioni di dati possono essere configurate con un elenco facoltativo di tipi di dispositivi a cui verrà applicata l'esclusione. Se viene impostato devices, vengono esclusi solo i dati sulle conversioni dei tipi di dispositivi specificati. Se non specificato, i dati sulle conversioni di tutti i tipi di dispositivi verranno esclusi.

Date e ore

A parte l'ambito e i dispositivi facoltativi, ogni esclusione di dati deve avere una data e un'ora di inizio e di fine. Un'esclusione di dati è orientata al passato e deve essere utilizzata per gli eventi che hanno un valore start_date_time nel passato e un valore end_date_time nel passato o nel futuro. Gli orari sono espressi nel fuso orario dell'account.

Esempio

L'esempio seguente mostra come creare un'esclusione di dati con ambito CHANNEL. Le sezioni commentate mostrano come specificare le campagne se impostassi un ambito CAMPAIGN.

BiddingDataExclusion DataExclusion =
    BiddingDataExclusion.newBuilder()
        // A unique name is required for every data exclusion.
        .setName("Data exclusion #" + getPrintableDateTime())
        // The CHANNEL scope applies the data exclusion to all campaigns of specific
        // advertising channel types. In this example, the exclusion will only apply to
        // Search campaigns. Use the CAMPAIGN scope to instead limit the scope to specific
        // campaigns.
        .setScope(SeasonalityEventScope.CHANNEL)
        .addAdvertisingChannelTypes(AdvertisingChannelType.SEARCH)
        // If setting scope CAMPAIGN, add individual campaign resource name(s) according to
        // the commented out line below.
        // .addCampaigns("INSERT_CAMPAIGN_RESOURCE_NAME_HERE")
        .setStartDateTime(startDateTime)
        .setEndDateTime(endDateTime)
        .build();

BiddingDataExclusionOperation operation =
    BiddingDataExclusionOperation.newBuilder().setCreate(DataExclusion).build();

MutateBiddingDataExclusionsResponse response =
    DataExclusionServiceClient.mutateBiddingDataExclusions(
        customerId.toString(), ImmutableList.of(operation));
System.out.printf(
    "Added data exclusion with resource name: %s%n",
    response.getResults(0).getResourceName());
AddBiddingDataExclusion.java
      

BiddingDataExclusion dataExclusion = new BiddingDataExclusion()
{
    // A unique name is required for every data exclusion.
    Name = "Data exclusion #" + ExampleUtilities.GetRandomString(),
    // The CHANNEL scope applies the data exclusion to all campaigns of specific
    // advertising channel types. In this example, the the exclusion will only apply to
    // Search campaigns. Use the CAMPAIGN scope to instead limit the scope to specific
    // campaigns.
    Scope = SeasonalityEventScope.Channel,
    AdvertisingChannelTypes = { AdvertisingChannelType.Search },
    // The date range should be less than 14 days.
    StartDateTime = startDateTime,
    EndDateTime = endDateTime,
};
BiddingDataExclusionOperation operation = new BiddingDataExclusionOperation()
{
    Create = dataExclusion
};

try
{
    MutateBiddingDataExclusionsResponse response =
        biddingDataExclusionService.MutateBiddingDataExclusions(
            customerId.ToString(), new[] { operation });
    Console.WriteLine($"Added data exclusion with resource name: " +
        $"{response.Results[0].ResourceName}");
}
catch (GoogleAdsException e)
{
    Console.WriteLine("Failure:");
    Console.WriteLine($"Message: {e.Message}");
    Console.WriteLine($"Failure: {e.Failure}");
    Console.WriteLine($"Request ID: {e.RequestId}");
    throw;
}
AddBiddingDataExclusion.cs
      

// Creates a bidding data exclusion.
$dataExclusion = new BiddingDataExclusion([
    // A unique name is required for every data exclusion.
    'name' => 'Data exclusion #' . Helper::getPrintableDatetime(),
    // The CHANNEL scope applies the data exclusion to all campaigns of specific
    // advertising channel types. In this example, the exclusion will only apply to
    // Search campaigns. Use the CAMPAIGN scope to instead limit the scope to specific
    // campaigns.
    'scope' => SeasonalityEventScope::CHANNEL,
    'advertising_channel_types' => [AdvertisingChannelType::SEARCH],
    // If setting scope CAMPAIGN, add individual campaign resource name(s) according to
    // the commented out line below.
    // 'campaigns' => ['INSERT_CAMPAIGN_RESOURCE_NAME_HERE'],
    'start_date_time' => $startDateTime,
    'end_date_time' => $endDateTime
]);

// Creates a bidding data exclusion operation.
$biddingDataExclusionOperation = new BiddingDataExclusionOperation();
$biddingDataExclusionOperation->setCreate($dataExclusion);

// Submits the bidding data exclusion operation to add the bidding data exclusion.
$biddingDataExclusionServiceClient =
    $googleAdsClient->getBiddingDataExclusionServiceClient();
$response = $biddingDataExclusionServiceClient->mutateBiddingDataExclusions(
    MutateBiddingDataExclusionsRequest::build($customerId, [$biddingDataExclusionOperation])
);

printf(
    "Added bidding data exclusion with resource name: '%s'.%s",
    $response->getResults()[0]->getResourceName(),
    PHP_EOL
);
AddBiddingDataExclusion.php
      

bidding_data_exclusion_service = client.get_service(
    "BiddingDataExclusionService"
)
operation = client.get_type("BiddingDataExclusionOperation")
bidding_data_exclusion = operation.create
# A unique name is required for every data exclusion
bidding_data_exclusion.name = f"Data exclusion #{uuid4()}"
# The CHANNEL scope applies the data exclusion to all campaigns of specific
# advertising channel types. In this example, the exclusion will only
# apply to Search campaigns. Use the CAMPAIGN scope to instead limit the
# scope to specific campaigns.
bidding_data_exclusion.scope = (
    client.enums.SeasonalityEventScopeEnum.CHANNEL
)
bidding_data_exclusion.advertising_channel_types.append(
    client.enums.AdvertisingChannelTypeEnum.SEARCH
)
# If setting scope CAMPAIGN, add individual campaign resource name(s)
# according to the commented out line below.
#
# bidding_data_exclusion.campaigns.append(
#     "INSERT_CAMPAIGN_RESOURCE_NAME_HERE"
# )

bidding_data_exclusion.start_date_time = start_date_time
bidding_data_exclusion.end_date_time = end_date_time

response = bidding_data_exclusion_service.mutate_bidding_data_exclusions(
    customer_id=customer_id, operations=[operation]
)

resource_name = response.results[0].resource_name

print(f"Added data exclusion with resource name: '{resource_name}'")
add_bidding_data_exclusion.py
      

client = Google::Ads::GoogleAds::GoogleAdsClient.new

operation = client.operation.create_resource.bidding_data_exclusion do |bda|
  # A unique name is required for every data excluseion.
  bda.name = "Seasonality Adjustment #{(Time.new.to_f * 1000).to_i}"

  # The CHANNEL scope applies the data exclusion to all campaigns of specific
  # advertising channel types. In this example, the conversion_rate_modifier
  # will only apply to Search campaigns. Use the CAMPAIGN scope to instead
  # limit the scope to specific campaigns.
  bda.scope = :CHANNEL
  bda.advertising_channel_types << :SEARCH

  # If setting scope CAMPAIGN, add individual campaign resource name(s)
  # according to the commented out line below.
  #
  # bda.campaigns << "INSERT_CAMPAIGN_RESOURCE_NAME_HERE"

  bda.start_date_time = start_date_time
  bda.end_date_time = end_date_time
end

response = client.service.bidding_data_exclusion.mutate_bidding_data_exclusions(
  customer_id: customer_id,
  operations: [operation],
)

puts "Added data exclusion with resource name #{response.results.first.resource_name}."
add_bidding_data_exclusion.rb
      

my $data_exclusion =
  Google::Ads::GoogleAds::V18::Resources::BiddingDataExclusion->new({
    # A unique name is required for every data exclusion.
    name => "Data exclusion #" . uniqid(),
    # The CHANNEL scope applies the data exclusion to all campaigns of specific
    # advertising channel types. In this example, the exclusion will only apply
    # to Search campaigns. Use the CAMPAIGN scope to instead limit the scope to
    # specific campaigns.
    scope                   => CHANNEL,
    advertisingChannelTypes => [SEARCH],
    # If setting scope CAMPAIGN, add individual campaign resource name(s)
    # according to the commented out line below.
    # campaigns     => ["INSERT_CAMPAIGN_RESOURCE_NAME_HERE"],
    startDateTime => $start_date_time,
    endDateTime   => $end_date_time
  });

my $operation =
  Google::Ads::GoogleAds::V18::Services::BiddingDataExclusionService::BiddingDataExclusionOperation
  ->new({
    create => $data_exclusion
  });

my $response = $api_client->BiddingDataExclusionService()->mutate({
    customerId => $customer_id,
    operations => [$operation]});

printf "Added data exclusion with resource name: '%s'.\n",
  $response->{results}[0]{resourceName};
add_bidding_data_exclusion.pl