הטמעה של המרות משופרות לצורך שיוך ללידים

המרות משופרות לצורך שיוך ללידים מאפשרות לכם לשפר את הדיוק של כדי למדוד המרות אופליין, צריך להעלות המרות מקליקים שכוללות מזהי משתמשים מגובבים (hashed) ופרטים נוספים אופציונליים שעוזרים ל-Google Ads לקשר את ההמרה למודעה שהניבה את הליד.

חשוב לעיין במאמר 'תחילת העבודה' במדריך וליישם את דרישות מוקדמות להמרות משופרות לצורך שיוך ללידים לפני שממשיכים בהטמעה.

אפשר להעלות המרות משופרות לצורך שיוך ללידים דרך ממשק המשתמש של Google Ads, כפי שמתואר במרכז העזרה, או דרך Google Ads API, כפי שמתואר במדריך הזה.

תכנון השילוב

תהליך השימוש

זה התהליך הכולל להעלאת המרות משופרות לצורך שיוך ללידים Google Ads API

1. חשוב לוודא שהטמעתם את הדרישות המוקדמות, כולל:

   1. מפעילים מעקב המרות.

   2. מאשרים את התנאים לשימוש בנתוני לקוחות.

   3. צריך להגדיר את התיוג בטפסים להשארת פרטים באתר.

   מידע נוסף זמין בקטע יישום דרישות מוקדמות לקבלת הנחיות מפורטות.

2. נירמול וגיבוב של נתוני הלידים, כמו כתובת אימייל, מספר טלפון וכתובת למשלוח דואר.

3. מזינים את נתוני הלידים המנורמלים והמגובבים (hashed) באובייקטים ClickConversion. לכל ClickConversion:

   1. אכלוס user_identifiers עם נתוני הלידים המנורמלים והמגובבים. אם יש לכם כמה מזהי משתמשים, תוכלו ליצור UserIdentifier נפרד לכל אחד מהם, עד חמישה מזהים.

   2. (אופציונלי, אבל מומלץ מאוד) מאכלסים את השדה order_id.

   3. (אופציונלי) כדי לקבל את המדידה המדויקת ביותר, מאכלסים את השדה gclid.

   4. חשוב לוודא שאתם מאכלסים את השדה השדה consent של אובייקט ClickConversion.

   5. סיום conversion_action לשם המשאב של ConversionAction עם type של UPLOAD_CLICKS. זה צריך להיות שם המשאב של ConversionAction שיצרתם כשהטמעתם את הדרישות המוקדמות.

4. מעלים פעולות יצירת ClickConversion אל ConversionUploadService, ומגדירים את partial_failure ל-true.

5. בודקים את ההעלאות.

שיטות מומלצות

כשמיישמים המרות משופרות ללידים, חשוב לזכור את השיטות המומלצות הבאות:

בודקים את מספר הלקוח

כשמעלים המרות, צריך להגדיר את מספר הלקוח לחשבון שכולל את פעולת ההמרה וגם את מעקב ההמרות. כדי לבדוק ההגדרה הזו, שולחים שאילתה לגבי הצגת Google Ads Customer מקור מידע ConversionTrackingSetting הנושא את השאילתה הבאה עם GoogleAdsService.SearchStream כדי למצוא את הערך customer.conversion_tracking_setting.google_ads_conversion_customer

אם יש לכם כמה מזהים, כדאי לכלול כמה מהם

אם מקצים order_id להמרה, מומלץ מאוד לכלול אותו. אם יש לך את המאפיין gclid להמרה, מומלץ לשלוח אותו בנוסף ל- user_identifiers כדי לשפר את הביצועים. בנוסף, אם יש לכם יותר מ-UserIdentifier אחד להמרה, כדאי לכלול כמה ערכים כדי להגדיל את הסיכוי להתאמה. כוללים את כל המזהים באותו ClickConversion.

בדיקת שגיאות של כשל חלקי במהלך הגדרת השילוב

בפעם הראשונה שמגדירים את השילוב של המרות משופרות לצורך שיוך ללידים, לבדוק ולטפל בשגיאות חלקיות בשדה partial_failure_error של את התשובה. אם יש בעיות בהגדרה, צריך לבדוק אותו כדי לחקור אותם ולטפל בהם. לקבלת פרטים נוספים ודוגמאות טיפול בשגיאות כשל חלקיות, ניתן לעיין במדריך הייעודי של כשל חלקי.

בזמן העיון בשגיאות כשל חלקיות, ניתן לעיין שגיאות במדריך לפתרון בעיות. אחרי שתפתרו את כל הבעיות עלה בשגיאות כשל חלקיות והשילוב שלך הושלם, עבור אל באמצעות אבחון של נתונים ממקורות אופליין כדי לבדוק באופן קבוע את תקינות ההמרות.

שליחת מספר המרות בקבוצה בבקשה אחת

אם אתם רוצים להעלות כמה המרות, כדאי לקבץ את הפעולות בUploadClickConversionsRequest אחד, במקום לשלוח בקשת העלאה לכל המרה.

כדאי לעיין במדריך בנושא מכסות לגבי הגבלות על מספר ההמרות בכל בקשה.

אם רוצים שניתוח נתונים אופליין יקבץ קבוצת בקשות באותה משימה לוגית, צריך להגדיר את הערך job_id של כל הבקשות לאותו ערך. האפשרות הזו יכולה להיות שימושית אם יש לכם משימה או תהליך יחידים שמעלים מספר גדול של המרות באמצעות מספר בקשות. אם מגדירים את job_id לכל אחת מהבקשות האלה לאותו ערך, אפשר לאחזר רשומה אחת של המשימה מ-job_summaries. אם במקום זאת מאפשרים ל-Google Ads API להקצות ערך שנוצר על ידי המערכת למאפיין job_id בכל בקשה, השדה job_summaries מכיל רשומה נפרדת לכל בקשה, מה שעשוי להפוך את ניתוח התפקוד הכולל של המשרה שלך למאתגר יותר.

העלאה של כל אירועי ההמרה אופליין הזמינים

כדי להבטיח דיווח מלא ומדויק על המרות, צריך להעלות את כל אירועי ההמרה הזמינים אופליין, כולל אירועים שלא הגיעו מ-Google Ads.

העלאה של כל אירועי ההמרה מובילה ל-CLICK_NOT_FOUND שגיאות בכל אחד מהאירועים שלא מ-Google Ads. מאחר שהשגיאות האלה צפויות כשמעלים את כל אירועי ההמרה, ב-UploadClickConversionsRequest יש שדה debug_enabled.

• אם הערך של debug_enabled הוא false או שהוא לא מוגדר, Google Ads API מבצע רק אימות בסיסי של הקלט, מדלג על בדיקות ההעלאה הבאות ומחזיר סטטוס הצלחה גם אם לא נמצאו קליקים עבור user_identifiers שצוין.

  (זוהי ברירת המחדל)

• אם הערך של debug_enabled הוא true, מערכת Google Ads API תבצע את כל האימותים מחזירה שגיאת CLICK_NOT_FOUND לכל ClickConversion שבו לא נמצאו המרות של Google Ads עבור user_identifiers שסופקו.

במהלך הפיתוח והבדיקה, אפשר להגדיר את debug_enabled לערך true כדי לזהות בעיות. לדוגמה, אם יש לכם קבוצה של המרות user_identifiers שאתם יודעים שמקורן בהמרות ב-Google Ads, אפשר להשתמש true כדי לאמת שההעלאות האלה לא מובילות שגיאה CLICK_NOT_FOUND. אבל כשממשיכים בפיתוח ובבדיקות, אנחנו ממליצים להגדיר את debug_enabled לערך false כדי למנוע שגיאות רבות מדי.

לא להשתמש בנתוני שיוך (Attribution) חיצוניים

אין להגדיר external_attribution_data ב-ClickConversion או לציין conversion_action שמשתמש במודל שיוך חיצוני. ב-Google Ads אין לתמוך בהמרות שהשיוך שלהן נקבע במערכת חיצונית עבור העלאות באמצעות מזהים.

הכנת הנתונים להעלאה

מטעמי פרטיות, צריך לבצע גיבוב של הנתונים הבאים באמצעות SHA-256 לפני שמעלים אותם:

• כתובת אימייל
• מספר טלפון
• שם פרטי
• שם משפחה
• רחוב

אין לבצע גיבוב (hash) של הנתונים הבאים:

• מדינה
• מדינה (State)
• עיר
• מיקוד

כדי לבצע סטנדרטיזציה של תוצאות הגיבוב, צריך לבצע את הפעולות הבאות לפני לבצע גיבוב (hashing) של אחד מהערכים הבאים:

• מסירים רווחים לבנים בתחילת הטקסט ובסופו.
• ממירים את הטקסט לאותיות קטנות.
• מזינים מספרי טלפון בפורמט שתואם לE164 רגילה.
• מסירים את כל הנקודות (.) שלפני שם הדומיין בכתובות אימייל עם הסיומת gmail.com ו-googlemail.com.

private String normalizeAndHash(MessageDigest digest, String s)
    throws UnsupportedEncodingException {
  // Normalizes by first converting all characters to lowercase, then trimming spaces.
  String normalized = s.toLowerCase();
  // Removes leading, trailing, and intermediate spaces.
  normalized = normalized.replaceAll("\\s+", "");
  // Hashes the normalized string using the hashing algorithm.
  byte[] hash = digest.digest(normalized.getBytes("UTF-8"));
  StringBuilder result = new StringBuilder();
  for (byte b : hash) {
    result.append(String.format("%02x", b));
  }

  return result.toString();
}

/**
 * Returns the result of normalizing and hashing an email address. For this use case, Google Ads
 * requires removal of any '.' characters preceding {@code gmail.com} or {@code googlemail.com}.
 *
 * @param digest the digest to use to hash the normalized string.
 * @param emailAddress the email address to normalize and hash.
 */
private String normalizeAndHashEmailAddress(MessageDigest digest, String emailAddress)
    throws UnsupportedEncodingException {
  String normalizedEmail = emailAddress.toLowerCase();
  String[] emailParts = normalizedEmail.split("@");
  if (emailParts.length > 1 && emailParts[1].matches("^(gmail|googlemail)\\.com\\s*")) {
    // Removes any '.' characters from the portion of the email address before the domain if the
    // domain is gmail.com or googlemail.com.
    emailParts[0] = emailParts[0].replaceAll("\\.", "");
    normalizedEmail = String.format("%s@%s", emailParts[0], emailParts[1]);
  }
  return normalizeAndHash(digest, normalizedEmail);
}
UploadEnhancedConversionsForLeads.java
      

/// <summary>
/// Normalizes the email address and hashes it. For this use case, Google Ads requires
/// removal of any '.' characters preceding <code>gmail.com</code> or
/// <code>googlemail.com</code>.
/// </summary>
/// <param name="emailAddress">The email address.</param>
/// <returns>The hash code.</returns>
private string NormalizeAndHashEmailAddress(string emailAddress)
{
    string normalizedEmail = emailAddress.ToLower();
    string[] emailParts = normalizedEmail.Split('@');
    if (emailParts.Length > 1 && (emailParts[1] == "gmail.com" ||
        emailParts[1] == "googlemail.com"))
    {
        // Removes any '.' characters from the portion of the email address before
        // the domain if the domain is gmail.com or googlemail.com.
        emailParts[0] = emailParts[0].Replace(".", "");
        normalizedEmail = $"{emailParts[0]}@{emailParts[1]}";
    }
    return NormalizeAndHash(normalizedEmail);
}

/// <summary>
/// Normalizes and hashes a string value.
/// </summary>
/// <param name="value">The value to normalize and hash.</param>
/// <returns>The normalized and hashed value.</returns>
private static string NormalizeAndHash(string value)
{
    return ToSha256String(digest, ToNormalizedValue(value));
}

/// <summary>
/// Hash a string value using SHA-256 hashing algorithm.
/// </summary>
/// <param name="digest">Provides the algorithm for SHA-256.</param>
/// <param name="value">The string value (e.g. an email address) to hash.</param>
/// <returns>The hashed value.</returns>
private static string ToSha256String(SHA256 digest, string value)
{
    byte[] digestBytes = digest.ComputeHash(Encoding.UTF8.GetBytes(value));
    // Convert the byte array into an unhyphenated hexadecimal string.
    return BitConverter.ToString(digestBytes).Replace("-", string.Empty);
}

/// <summary>
/// Removes leading and trailing whitespace and converts all characters to
/// lower case.
/// </summary>
/// <param name="value">The value to normalize.</param>
/// <returns>The normalized value.</returns>
private static string ToNormalizedValue(string value)
{
    return value.Trim().ToLower();
}
UploadEnhancedConversionsForLeads.cs
      

private static function normalizeAndHash(string $hashAlgorithm, string $value): string
{
    // Normalizes by first converting all characters to lowercase, then trimming spaces.
    $normalized = strtolower($value);
    // Removes leading, trailing, and intermediate spaces.
    $normalized = str_replace(' ', '', $normalized);
    return hash($hashAlgorithm, strtolower(trim($normalized)));
}

/**
 * Returns the result of normalizing and hashing an email address. For this use case, Google
 * Ads requires removal of any '.' characters preceding "gmail.com" or "googlemail.com".
 *
 * @param string $hashAlgorithm the hash algorithm to use
 * @param string $emailAddress the email address to normalize and hash
 * @return string the normalized and hashed email address
 */
private static function normalizeAndHashEmailAddress(
    string $hashAlgorithm,
    string $emailAddress
): string {
    $normalizedEmail = strtolower($emailAddress);
    $emailParts = explode("@", $normalizedEmail);
    if (
        count($emailParts) > 1
        && preg_match('/^(gmail|googlemail)\.com\s*/', $emailParts[1])
    ) {
        // Removes any '.' characters from the portion of the email address before the domain
        // if the domain is gmail.com or googlemail.com.
        $emailParts[0] = str_replace(".", "", $emailParts[0]);
        $normalizedEmail = sprintf('%s@%s', $emailParts[0], $emailParts[1]);
    }
    return self::normalizeAndHash($hashAlgorithm, $normalizedEmail);
}
UploadEnhancedConversionsForLeads.php
      

def normalize_and_hash_email_address(email_address):
    """Returns the result of normalizing and hashing an email address.

    For this use case, Google Ads requires removal of any '.' characters
    preceding "gmail.com" or "googlemail.com"

    Args:
        email_address: An email address to normalize.

    Returns:
        A normalized (lowercase, removed whitespace) and SHA-265 hashed string.
    """
    normalized_email = email_address.lower()
    email_parts = normalized_email.split("@")
    # Checks whether the domain of the email address is either "gmail.com"
    # or "googlemail.com". If this regex does not match then this statement
    # will evaluate to None.
    is_gmail = re.match(r"^(gmail|googlemail)\.com$", email_parts[1])

    # Check that there are at least two segments and the second segment
    # matches the above regex expression validating the email domain name.
    if len(email_parts) > 1 and is_gmail:
        # Removes any '.' characters from the portion of the email address
        # before the domain if the domain is gmail.com or googlemail.com.
        email_parts[0] = email_parts[0].replace(".", "")
        normalized_email = "@".join(email_parts)

    return normalize_and_hash(normalized_email)


def normalize_and_hash(s):
    """Normalizes and hashes a string with SHA-256.

    Private customer data must be hashed during upload, as described at:
    https://support.google.com/google-ads/answer/7474263

    Args:
        s: The string to perform this operation on.

    Returns:
        A normalized (lowercase, removed whitespace) and SHA-256 hashed string.
    """
    return hashlib.sha256(s.strip().lower().encode()).hexdigest()
upload_enhanced_conversions_for_leads.py
      

# Returns the result of normalizing and then hashing the string using the
# provided digest.  Private customer data must be hashed during upload, as
# described at https://support.google.com/google-ads/answer/7474263.
def normalize_and_hash(str)
  # Remove leading and trailing whitespace and ensure all letters are lowercase
  # before hasing.
  Digest::SHA256.hexdigest(str.strip.downcase)
end

# Returns the result of normalizing and hashing an email address. For this use
# case, Google Ads requires removal of any '.' characters preceding 'gmail.com'
# or 'googlemail.com'.
def normalize_and_hash_email(email)
  email_parts = email.downcase.split("@")
  # Removes any '.' characters from the portion of the email address before the
  # domain if the domain is gmail.com or googlemail.com.
  if email_parts.last =~ /^(gmail|googlemail)\.com\s*/
    email_parts[0] = email_parts[0].gsub('.', '')
  end
  normalize_and_hash(email_parts.join('@'))
end
upload_enhanced_conversions_for_leads.rb
      

sub normalize_and_hash {
  my $value = shift;

  # Removes leading, trailing, and intermediate spaces.
  $value =~ s/\s+//g;
  return sha256_hex(lc $value);
}

# Returns the result of normalizing and hashing an email address. For this use
# case, Google Ads requires removal of any '.' characters preceding 'gmail.com'
# or 'googlemail.com'.
sub normalize_and_hash_email_address {
  my $email_address = shift;

  my $normalized_email = lc $email_address;
  my @email_parts      = split('@', $normalized_email);
  if (scalar @email_parts > 1
    && $email_parts[1] =~ /^(gmail|googlemail)\.com\s*/)
  {
    # Remove any '.' characters from the portion of the email address before the
    # domain if the domain is 'gmail.com' or 'googlemail.com'.
    $email_parts[0] =~ s/\.//g;
    $normalized_email = sprintf '%s@%s', $email_parts[0], $email_parts[1];
  }
  return normalize_and_hash($normalized_email);
}
upload_enhanced_conversions_for_leads.pl
      

העלאת המרות משופרות

בקטעי הקוד הבאים מוסבר איך ליצור העלאה של המרות שמכילה מזהים של כתובת אימייל ומספר טלפון, עם סטנדרטיזציה וגיבוב לפי הצורך. מומלץ לכלול את השדות gclid ו-order_id בהמרה, אם הם זמינים.

// Creates an empty builder for constructing the click conversion.
ClickConversion.Builder clickConversionBuilder = ClickConversion.newBuilder();

// Extracts user email and phone from the raw data, normalizes and hashes it, then wraps it in
// UserIdentifier objects.
// Creates a separate UserIdentifier object for each. The data in this example is hardcoded, but
// in your application you might read the raw data from an input file.

// IMPORTANT: Since the identifier attribute of UserIdentifier
// (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier) is a
// oneof
// (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must set only ONE of
// hashedEmail, hashedPhoneNumber, mobileId, thirdPartyUserId, or addressInfo. Setting more
// than one of these attributes on the same UserIdentifier will clear all the other members
// of the oneof. For example, the following code is INCORRECT and will result in a
// UserIdentifier with ONLY a hashedPhoneNumber.
//
// UserIdentifier incorrectlyPopulatedUserIdentifier =
//     UserIdentifier.newBuilder()
//         .setHashedEmail("...")
//         .setHashedPhoneNumber("...")
//         .build();

ImmutableMap.Builder<String, String> rawRecordBuilder =
    ImmutableMap.<String, String>builder()
        .put("email", "alex.2@example.com")
        // Phone number to be converted to E.164 format, with a leading '+' as required.
        .put("phone", "+1 800 5550102")
        // This example lets you put conversion details as arguments, but in reality you might
        // store this data alongside other user data, so we include it in this sample user
        // record.
        .put("conversionActionId", Long.toString(conversionActionId))
        .put("conversionDateTime", conversionDateTime)
        .put("conversionValue", Double.toString(conversionValue))
        .put("currencyCode", "USD");

// Adds entries for the optional fields.
if (orderId != null) {
  rawRecordBuilder.put("orderId", orderId);
}
if (gclid != null) {
  rawRecordBuilder.put("gclid", gclid);
}
if (adUserDataConsent != null) {
  rawRecordBuilder.put("adUserDataConsent", adUserDataConsent.name());
}

// Builds the map representing the record.
Map<String, String> rawRecord = rawRecordBuilder.build();

// Creates a SHA256 message digest for hashing user identifiers in a privacy-safe way, as
// described at https://support.google.com/google-ads/answer/9888656.
MessageDigest sha256Digest = MessageDigest.getInstance("SHA-256");

// Creates a list for the user identifiers.
List<UserIdentifier> userIdentifiers = new ArrayList<>();

// Creates a user identifier using the hashed email address, using the normalize and hash method
// specifically for email addresses.
UserIdentifier emailIdentifier =
    UserIdentifier.newBuilder()
        // Optional: specify the user identifier source.
        .setUserIdentifierSource(UserIdentifierSource.FIRST_PARTY)
        // Uses the normalize and hash method specifically for email addresses.
        .setHashedEmail(normalizeAndHashEmailAddress(sha256Digest, rawRecord.get("email")))
        .build();
userIdentifiers.add(emailIdentifier);

// Creates a user identifier using normalized and hashed phone info.
UserIdentifier hashedPhoneNumberIdentifier =
    UserIdentifier.newBuilder()
        .setHashedPhoneNumber(normalizeAndHash(sha256Digest, rawRecord.get("phone")))
        .build();
// Adds the hashed phone number identifier to the UserData object's list.
userIdentifiers.add(hashedPhoneNumberIdentifier);

// Adds the user identifiers to the conversion.
clickConversionBuilder.addAllUserIdentifiers(userIdentifiers);
UploadEnhancedConversionsForLeads.java
      

// Adds a user identifier using the hashed email address, using the normalize
// and hash method specifically for email addresses.
clickConversion.UserIdentifiers.Add(new UserIdentifier()
{
    HashedEmail = NormalizeAndHashEmailAddress("alex.2@example.com"),
    // Optional: Specifies the user identifier source.
    UserIdentifierSource = UserIdentifierSource.FirstParty
});

// Adds a user identifier using normalized and hashed phone info.
clickConversion.UserIdentifiers.Add(new UserIdentifier()
{
    HashedPhoneNumber = NormalizeAndHash("+1 800 5550102"),
    // Optional: Specifies the user identifier source.
    UserIdentifierSource = UserIdentifierSource.FirstParty
});

// Adds a user identifier with all the required mailing address elements.
clickConversion.UserIdentifiers.Add(new UserIdentifier()
{
    AddressInfo = new OfflineUserAddressInfo()
    {
        // FirstName and LastName must be normalized and hashed.
        HashedFirstName = NormalizeAndHash("Alex"),
        HashedLastName = NormalizeAndHash("Quinn"),
        // CountryCode and PostalCode are sent in plain text.
        CountryCode = "US",
        PostalCode = "94045"
    }
});
UploadEnhancedConversionsForLeads.cs
      

// Creates a click conversion with the specified attributes.
$clickConversion = new ClickConversion();

// Extract user email and phone from the raw data, normalize and hash it, then wrap it in
// UserIdentifier objects. Creates a separate UserIdentifier object for each.
// The data in this example is hardcoded, but in your application you might read the raw
// data from an input file.

// IMPORTANT: Since the identifier attribute of UserIdentifier
// (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier) is a
// oneof
// (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must set only ONE
// of hashedEmail, hashedPhoneNumber, mobileId, thirdPartyUserId, or addressInfo. Setting
// more than one of these attributes on the same UserIdentifier will clear all the other
// members of the oneof. For example, the following code is INCORRECT and will result in a
// UserIdentifier with ONLY a hashedPhoneNumber.
//
// $incorrectlyPopulatedUserIdentifier = new UserIdentifier([
//    'hashed_email' => '...',
//    'hashed_phone_number' => '...'
// ]);

$rawRecord = [
    // Email address that includes a period (.) before the Gmail domain.
    'email' => 'alex.2@example.com',
    // Phone number to be converted to E.164 format, with a leading '+' as required.
    'phone' => '+1 800 5550102',
    // This example lets you input conversion details as arguments, but in reality you might
    // store this data alongside other user data, so we include it in this sample user
    // record.
    'orderId' => $orderId,
    'gclid' => $gclid,
    'conversionActionId' => $conversionActionId,
    'conversionDateTime' => $conversionDateTime,
    'conversionValue' => $conversionValue,
    'currencyCode' => 'USD',
    'adUserDataConsent' => $adUserDataConsent
];

// Creates a list for the user identifiers.
$userIdentifiers = [];

// Uses the SHA-256 hash algorithm for hashing user identifiers in a privacy-safe way, as
// described at https://support.google.com/google-ads/answer/9888656.
$hashAlgorithm = "sha256";

// Creates a user identifier using the hashed email address, using the normalize and hash
// method specifically for email addresses.
$emailIdentifier = new UserIdentifier([
    // Uses the normalize and hash method specifically for email addresses.
    'hashed_email' => self::normalizeAndHashEmailAddress(
        $hashAlgorithm,
        $rawRecord['email']
    ),
    // Optional: Specifies the user identifier source.
    'user_identifier_source' => UserIdentifierSource::FIRST_PARTY
]);
$userIdentifiers[] = $emailIdentifier;

// Checks if the record has a phone number, and if so, adds a UserIdentifier for it.
if (array_key_exists('phone', $rawRecord)) {
    $hashedPhoneNumberIdentifier = new UserIdentifier([
        'hashed_phone_number' => self::normalizeAndHash(
            $hashAlgorithm,
            $rawRecord['phone'],
            true
        )
    ]);
    // Adds the hashed email identifier to the user identifiers list.
    $userIdentifiers[] = $hashedPhoneNumberIdentifier;
}

// Adds the user identifiers to the conversion.
$clickConversion->setUserIdentifiers($userIdentifiers);
UploadEnhancedConversionsForLeads.php
      

# Extract user email and phone from the raw data, normalize and hash it,
# then wrap it in UserIdentifier objects. Create a separate UserIdentifier
# object for each. The data in this example is hardcoded, but in your
# application you might read the raw data from an input file.

# IMPORTANT: Since the identifier attribute of UserIdentifier
# (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier)
# is a oneof
# (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must
# set only ONE of hashed_email, hashed_phone_number, mobile_id,
# third_party_user_id, or address_info. Setting more than one of these
# attributes on the same UserIdentifier will clear all the other members of
# the oneof. For example, the following code is INCORRECT and will result in
# a UserIdentifier with ONLY a hashed_phone_number:
#
# incorrectly_populated_user_identifier = client.get_type("UserIdentifier")
# incorrectly_populated_user_identifier.hashed_email = "...""
# incorrectly_populated_user_identifier.hashed_phone_number = "...""

raw_record = {
    # Email address that includes a period (.) before the Gmail domain.
    "email": "alex.2@example.com",
    # Phone number to be converted to E.164 format, with a leading '+' as
    # required.
    "phone": "+1 800 5550102",
    # This example lets you input conversion details as arguments,
    # but in reality you might store this data alongside other user data,
    # so we include it in this sample user record.
    "order_id": order_id,
    "gclid": gclid,
    "conversion_action_id": conversion_action_id,
    "conversion_date_time": conversion_date_time,
    "conversion_value": conversion_value,
    "currency_code": "USD",
    "ad_user_data_consent": ad_user_data_consent,
}

# Constructs the click conversion.
click_conversion = client.get_type("ClickConversion")
# Creates a user identifier using the hashed email address, using the
# normalize and hash method specifically for email addresses.
email_identifier = client.get_type("UserIdentifier")
# Optional: Specifies the user identifier source.
email_identifier.user_identifier_source = (
    client.enums.UserIdentifierSourceEnum.FIRST_PARTY
)
# Uses the normalize and hash method specifically for email addresses.
email_identifier.hashed_phone_number = normalize_and_hash_email_address(
    raw_record["email"]
)
# Adds the user identifier to the conversion.
click_conversion.user_identifiers.append(email_identifier)

# Checks if the record has a phone number, and if so, adds a UserIdentifier
# for it.
if raw_record.get("phone") is not None:
    phone_identifier = client.get_type("UserIdentifier")
    phone_identifier.hashed_phone_number = normalize_and_hash(
        raw_record["phone"]
    )
    # Adds the phone identifier to the conversion adjustment.
    click_conversion.user_identifiers.append(phone_identifier)
upload_enhanced_conversions_for_leads.py
      

# Extract user email and phone from the raw data, normalize and hash it,
# then wrap it in UserIdentifier objects. Create a separate UserIdentifier
# object for each. The data in this example is hardcoded, but in your
# application you might read the raw data from an input file.

# IMPORTANT: Since the identifier attribute of UserIdentifier
# (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier)
# is a oneof
# (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must
# set only ONE of hashed_email, hashed_phone_number, mobile_id,
# third_party_user_id, or address_info. Setting more than one of these
# attributes on the same UserIdentifier will clear all the other members of
# the oneof. For example, the following code is INCORRECT and will result in
# a UserIdentifier with ONLY a hashed_phone_number:
#
# incorrectly_populated_user_identifier.hashed_email = "...""
# incorrectly_populated_user_identifier.hashed_phone_number = "...""

raw_record = {
  # Email address that includes a period (.) before the Gmail domain.
  "email" => "alex.2@example.com",
  # Phone number to be converted to E.164 format, with a leading '+' as
  # required.
  "phone" => "+1 800 5550102",
  # This example lets you input conversion details as arguments,
  # but in reality you might store this data alongside other user data,
  # so we include it in this sample user record.
  "order_id" => order_id,
  "gclid" => gclid,
  "conversion_action_id" => conversion_action_id,
  "conversion_date_time" => conversion_date_time,
  "conversion_value" => conversion_value,
  "currency_code" => "USD",
  "ad_user_data_consent" => ad_user_data_consent,
}

click_conversion = client.resource.click_conversion do |cc|
  cc.conversion_action = client.path.conversion_action(customer_id, conversion_action_id)
  cc.conversion_date_time = conversion_date_time
  cc.conversion_value = conversion_value.to_f
  cc.currency_code = 'USD'

  unless order_id.nil?
    cc.order_id = order_id
  end

  unless raw_record["gclid"].nil?
    cc.gclid = gclid
  end

  # Specifies whether user consent was obtained for the data you are
  # uploading. For more details, see:
  # https://www.google.com/about/company/user-consent-policy
  unless raw_record["ad_user_data_consent"].nil?
    cc.consent = client.resource.consent do |c|
      c.ad_user_data = ad_user_data_consent
    end
  end

  # Creates a user identifier using the hashed email address, using the
  # normalize and hash method specifically for email addresses.
  # If using a phone number, use the normalize_and_hash method instead.
  cc.user_identifiers << client.resource.user_identifier do |ui|
    ui.hashed_phone_number = normalize_and_hash_email(raw_record["email"])
    # Optional: Specifies the user identifier source.
    ui.user_identifier_source = :FIRST_PARTY
  end

  # Checks if the record has a phone number, and if so, adds a UserIdentifier
  # for it.
  unless raw_record["phone"].nil?
    cc.user_identifiers << client.resource.user_identifier do |ui|
      ui.hashed_phone_number = normalize_and_hash_email(raw_record["phone"])
    end
  end
end
upload_enhanced_conversions_for_leads.rb
      

# Create an empty click conversion.
my $click_conversion =
  Google::Ads::GoogleAds::V18::Services::ConversionUploadService::ClickConversion
  ->new({});

# Extract user email and phone from the raw data, normalize and hash it,
# then wrap it in UserIdentifier objects. Create a separate UserIdentifier
# object for each.
# The data in this example is hardcoded, but in your application
# you might read the raw data from an input file.
#
# IMPORTANT: Since the identifier attribute of UserIdentifier
# (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier)
# is a oneof
# (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must set
# only ONE of hashed_email, hashed_phone_number, mobile_id, third_party_user_id,
# or address-info. Setting more than one of these attributes on the same UserIdentifier
# will clear all the other members of the oneof. For example, the following code is
# INCORRECT and will result in a UserIdentifier with ONLY a hashed_phone_number:
#
# my $incorrect_user_identifier = Google::Ads::GoogleAds::V18::Common::UserIdentifier->new({
#   hashedEmail => '...',
#   hashedPhoneNumber => '...',
# });
my $raw_record = {
  # Email address that includes a period (.) before the Gmail domain.
  email => 'alex.2@example.com',
  # Phone number to be converted to E.164 format, with a leading '+' as
  # required.
  phone => '+1 800 5550102',
  # This example lets you input conversion details as arguments,
  # but in reality you might store this data alongside other user data,
  # so we include it in this sample user record.
  orderId            => $order_id,
  gclid              => $gclid,
  conversionActionId => $conversion_action_id,
  conversionDateTime => $conversion_date_time,
  conversionValue    => $conversion_value,
  currencyCode       => "USD",
  adUserDataConsent  => $ad_user_data_consent
};
my $user_identifiers = [];

# Create a user identifier using the hashed email address, using the normalize
# and hash method specifically for email addresses.
my $hashed_email = normalize_and_hash_email_address($raw_record->{email});
push(
  @$user_identifiers,
  Google::Ads::GoogleAds::V18::Common::UserIdentifier->new({
      hashedEmail => $hashed_email,
      # Optional: Specify the user identifier source.
      userIdentifierSource => FIRST_PARTY
    }));

# Create a user identifier using normalized and hashed phone info.
my $hashed_phone = normalize_and_hash($raw_record->{phone});
push(
  @$user_identifiers,
  Google::Ads::GoogleAds::V18::Common::UserIdentifier->new({
      hashedPhone => $hashed_phone,
      # Optional: Specify the user identifier source.
      userIdentifierSource => FIRST_PARTY
    }));

# Add the user identifiers to the conversion.
$click_conversion->{userIdentifiers} = $user_identifiers;
upload_enhanced_conversions_for_leads.pl
      

// Adds details of the conversion.
clickConversionBuilder.setConversionAction(
    ResourceNames.conversionAction(
        customerId, Long.parseLong(rawRecord.get("conversionActionId"))));
clickConversionBuilder.setConversionDateTime(rawRecord.get("conversionDateTime"));
clickConversionBuilder.setConversionValue(Double.parseDouble(rawRecord.get("conversionValue")));
clickConversionBuilder.setCurrencyCode(rawRecord.get("currencyCode"));

// Sets the order ID if provided.
if (rawRecord.containsKey("orderId")) {
  clickConversionBuilder.setOrderId(rawRecord.get("orderId"));
}

// Sets the Google click ID (gclid) if provided.
if (rawRecord.containsKey("gclid")) {
  clickConversionBuilder.setGclid(rawRecord.get("gclid"));
}

// Sets the consent information, if provided.
if (rawRecord.containsKey("adUserDataConsent")) {
  // Specifies whether user consent was obtained for the data you are uploading. See
  // https://www.google.com/about/company/user-consent-policy for details.
  clickConversionBuilder.setConsent(
      Consent.newBuilder()
          .setAdUserData(ConsentStatus.valueOf(rawRecord.get("adUserDataConsent"))));
}

// Calls build to build the conversion.
ClickConversion clickConversion = clickConversionBuilder.build();
UploadEnhancedConversionsForLeads.java
      

// Adds details of the conversion.
clickConversion.ConversionAction =
    ResourceNames.ConversionAction(customerId, conversionActionId);
clickConversion.ConversionDateTime = conversionDateTime;
clickConversion.ConversionValue = conversionValue;
clickConversion.CurrencyCode = "USD";

// Sets the order ID if provided.
if (!string.IsNullOrEmpty(orderId))
{
    clickConversion.OrderId = orderId;
}

// Sets the Google click ID (gclid) if provided.
if (!string.IsNullOrEmpty(gclid))
{
    clickConversion.Gclid = gclid;
}
UploadEnhancedConversionsForLeads.cs
      

// Adds details of the conversion.
$clickConversion->setConversionAction(
    ResourceNames::forConversionAction($customerId, $rawRecord['conversionActionId'])
);
$clickConversion->setConversionDateTime($rawRecord['conversionDateTime']);
$clickConversion->setConversionValue($rawRecord['conversionValue']);
$clickConversion->setCurrencyCode($rawRecord['currencyCode']);

// Sets the order ID if provided.
if (!empty($rawRecord['orderId'])) {
    $clickConversion->setOrderId($rawRecord['orderId']);
}

// Sets the Google click ID (gclid) if provided.
if (!empty($rawRecord['gclid'])) {
    $clickConversion->setGclid($rawRecord['gclid']);
}

// Sets the ad user data consent if provided.
if (!empty($rawRecord['adUserDataConsent'])) {
    // Specifies whether user consent was obtained for the data you are uploading. See
    // https://www.google.com/about/company/user-consent-policy for details.
    $clickConversion->setConsent(
        new Consent(['ad_user_data' => $rawRecord['adUserDataConsent']])
    );
}
UploadEnhancedConversionsForLeads.php
      

# Add details of the conversion.
# Gets the conversion action resource name.
conversion_action_service = client.get_service("ConversionActionService")
click_conversion.conversion_action = (
    conversion_action_service.conversion_action_path(
        customer_id, raw_record["conversion_action_id"]
    )
)
click_conversion.conversion_date_time = raw_record["conversion_date_time"]
click_conversion.conversion_value = raw_record["conversion_value"]
click_conversion.currency_code = raw_record["currency_code"]

# Sets the order ID if provided.
if raw_record.get("order_id"):
    click_conversion.order_id = raw_record["order_id"]

# Sets the gclid if provided.
if raw_record.get("gclid"):
    click_conversion.gclid = raw_record["gclid"]

# Specifies whether user consent was obtained for the data you are
# uploading. For more details, see:
# https://www.google.com/about/company/user-consent-policy
if raw_record["ad_user_data_consent"]:
    click_conversion.consent.ad_user_data = client.enums.ConsentStatusEnum[
        raw_record["ad_user_data_consent"]
    ]
upload_enhanced_conversions_for_leads.py
      

cc.conversion_action = client.path.conversion_action(customer_id, conversion_action_id)
cc.conversion_date_time = conversion_date_time
cc.conversion_value = conversion_value.to_f
cc.currency_code = 'USD'

unless order_id.nil?
  cc.order_id = order_id
end

unless raw_record["gclid"].nil?
  cc.gclid = gclid
end

# Specifies whether user consent was obtained for the data you are
# uploading. For more details, see:
# https://www.google.com/about/company/user-consent-policy
unless raw_record["ad_user_data_consent"].nil?
  cc.consent = client.resource.consent do |c|
    c.ad_user_data = ad_user_data_consent
  end
end
upload_enhanced_conversions_for_leads.rb
      

# Add details of the conversion.
$click_conversion->{conversionAction} =
  Google::Ads::GoogleAds::V18::Utils::ResourceNames::conversion_action(
  $customer_id, $raw_record->{conversionActionId});
$click_conversion->{conversionDateTime} = $raw_record->{conversionDateTime};
$click_conversion->{conversionValue}    = $raw_record->{conversionValue};
$click_conversion->{currencyCode}       = $raw_record->{currencyCode};

# Set the order ID if provided.
if (defined $raw_record->{orderId}) {
  $click_conversion->{orderId} = $raw_record->{orderId};
}

# Set the Google click ID (gclid) if provided.
if (defined $raw_record->{gclid}) {
  $click_conversion->{gclid} = $raw_record->{gclid};
}

# Set the consent information, if provided.
if (defined $raw_record->{adUserDataConsent}) {
  $click_conversion->{consent} =
    Google::Ads::GoogleAds::V18::Common::Consent->new({
      adUserData => $raw_record->{adUserDataConsent}});
}
upload_enhanced_conversions_for_leads.pl
      

// Creates the conversion upload service client.
try (ConversionUploadServiceClient conversionUploadServiceClient =
    googleAdsClient.getLatestVersion().createConversionUploadServiceClient()) {
  // Uploads the click conversion. Partial failure should always be set to true.

  // NOTE: This request contains a single conversion as a demonstration.  However, if you have
  // multiple conversions to upload, it's best to upload multiple conversions per request
  // instead of sending a separate request per conversion. See the following for per-request
  // limits:
  // https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
  UploadClickConversionsResponse response =
      conversionUploadServiceClient.uploadClickConversions(
          UploadClickConversionsRequest.newBuilder()
              .setCustomerId(Long.toString(customerId))
              .addConversions(clickConversion)
              // Enables partial failure (must be true).
              .setPartialFailure(true)
              .build());
UploadEnhancedConversionsForLeads.java
      

// Uploads the click conversion. Partial failure should always be set to true.
// NOTE: This request contains a single conversion as a demonstration.
// However, if you have multiple conversions to upload, it's best to upload multiple
// conversions per request instead of sending a separate request per conversion.
// See the following for per-request limits:
// https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload
UploadClickConversionsResponse response =
    conversionUploadService.UploadClickConversions(
        new UploadClickConversionsRequest()
        {
            CustomerId = customerId.ToString(),
            Conversions = { clickConversion },
            // Enables partial failure (must be true).
            PartialFailure = true
        });
UploadEnhancedConversionsForLeads.cs
      

// Issues a request to upload the click conversion.
$conversionUploadServiceClient = $googleAdsClient->getConversionUploadServiceClient();
// NOTE: This request contains a single conversion as a demonstration.  However, if you have
// multiple conversions to upload, it's best to upload multiple conversions per request
// instead of sending a separate request per conversion. See the following for per-request
// limits:
// https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
$response = $conversionUploadServiceClient->uploadClickConversions(
    // Enables partial failure (must be true).
    UploadClickConversionsRequest::build($customerId, [$clickConversion], true)
);
UploadEnhancedConversionsForLeads.php
      

# Creates the conversion upload service client.
conversion_upload_service = client.get_service("ConversionUploadService")
# Uploads the click conversion. Partial failure should always be set to
# True.
# NOTE: This request only uploads a single conversion, but if you have
# multiple conversions to upload, it's most efficient to upload them in a
# single request. See the following for per-request limits for reference:
# https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
response = conversion_upload_service.upload_click_conversions(
    customer_id=customer_id,
    conversions=[click_conversion],
    # Enables partial failure (must be true).
    partial_failure=True,
)
upload_enhanced_conversions_for_leads.py
      

response = client.service.conversion_upload.upload_click_conversions(
  customer_id: customer_id,
  conversions: [click_conversion],
  # Partial failure must be true.
  partial_failure: true,
)

if response.partial_failure_error
  puts "Partial failure encountered: #{response.partial_failure_error.message}"
else
  result = response.results.first
  puts "Uploaded click conversion that happened at #{result.conversion_date_time} " \
    "to #{result.conversion_action}."
end
upload_enhanced_conversions_for_leads.rb
      

# Upload the click conversion. Partial failure should always be set to true.
#
# NOTE: This request contains a single conversion as a demonstration.
# However, if you have multiple conversions to upload, it's best to
# upload multiple conversions per request instead of sending a separate
# request per conversion. See the following for per-request limits:
# https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
my $response =
  $api_client->ConversionUploadService()->upload_click_conversions({
    customerId  => $customer_id,
    conversions => [$click_conversion],
    # Enable partial failure (must be true).
    partialFailure => "true"
  });
upload_enhanced_conversions_for_leads.pl
      

בדיקת ההעלאות

אתם יכולים להשתמש באבחון של נתונים ממקורות אופליין כדי לבדוק את המצב הכללי של ההעלאות האחרונות שלכם. שימו לב: תהליך ההעלאה לא המשמעות היא בהכרח שלהעלאות יש התאמות.

כשאתם מדווחים על מדדי ההמרות של הקמפיינים, כדאי לעיין במאמר מיפוי מדדי ממשק המשתמש כדי למצוא התאמה בין מדדי ממשק המשתמש של Google Ads לבין שדות הדיווח של Google Ads API. אפשר גם להריץ שאילתה על המשאב conversion_action כדי להציג את המספר הכולל של ההמרות ואת ערך ההמרה הכולל של פעולת המרה נתונה.

השלבים הבאים

אם אתם צריכים לשנות את ההמרות, תוכלו לעיין במדריך העלאת התאמות של המרות.

לקבלת הדרכה לגבי פתרון בעיות בשילוב של המרות משופרות לצורך שיוך ללידים, להמשיך אל פתרון בעיות מותאמת אישית.