Triển khai tính năng lượt chuyển đổi nâng cao cho web

Với tính năng lượt chuyển đổi nâng cao cho web, bạn có thể cải thiện độ chính xác của kết quả đo lường lượt chuyển đổi trên web bằng cách tải các thông tin điều chỉnh lượt chuyển đổi lên. Thông tin này chứa mã giao dịch và giá trị nhận dạng người dùng đã băm.

Hãy nhớ xem hướng dẫn Bắt đầu và triển khai các điều kiện tiên quyết cho tính năng lượt chuyển đổi nâng cao cho web trước khi tiếp tục triển khai.

Quy trình sử dụng

Sau đây là quy trình tổng thể để tải lượt chuyển đổi nâng cao lên cho web trong API Google Ads.

  1. Đảm bảo bạn đã triển khai các điều kiện tiên quyết, bao gồm:

    1. Bật tính năng theo dõi lượt chuyển đổi.

    2. Chấp nhận các điều khoản về dữ liệu khách hàng.

    3. Định cấu hình tính năng gắn thẻ trên trang web của bạn.

    Hãy xem bài viết Triển khai điều kiện tiên quyết để được hướng dẫn chi tiết.

  2. Chuẩn hoá và băm dữ liệu người dùng, chẳng hạn như địa chỉ email, số điện thoại và địa chỉ gửi thư.

  3. Đặt dữ liệu người dùng đã chuẩn hoá và băm vào các đối tượng ConversionAdjustment. Để mỗi ConversionAdjustment, hãy làm như sau:

    1. Đặt order_id thành mã đơn hàng của lượt chuyển đổi cần điều chỉnh. Mã này phải khớp với đơn đặt hàng mã nhận dạng do thẻ.

    2. Điền user_identifiers bằng dữ liệu người dùng đã chuẩn hoá và đã băm. Nếu bạn có nhiều người dùng có sẵn giá trị nhận dạng, hãy tạo một UserIdentifier riêng cho từng mã, tối đa 5 giá trị nhận dạng.

    3. Đặt adjustment_type đến ENHANCEMENT.

    4. Đặt conversion_action vào tên tài nguyên của ConversionActiontypeWEBPAGE. Đây phải là tên tài nguyên của ConversionAction mà bạn đã tạo khi bạn triển khai điều kiện tiên quyết.

    5. (Không bắt buộc) Điền gclid_date_time_pair để có kết quả đo lường chính xác nhất. Đặt conversion_date_time thành ngày và giờ xảy ra lượt chuyển đổi với order_id đã chỉ định. Nêu rõ giá trị chênh lệch múi giờ và sử dụng định dạng yyyy-mm-dd HH:mm:ss+|-HH:mm, ví dụ: 2022-01-01 19:32:45-05:00 (bỏ qua giờ mùa hè) của Google.

    6. (Không bắt buộc) Đặt user_agent thành tác nhân người dùng của yêu cầu đã gửi lượt chuyển đổi ban đầu để lượt chuyển đổi và lượt chuyển đổi được nâng cao đều được phân bổ là trên cùng một thiết bị hoặc cả hai đều được phân bổ là trên nhiều thiết bị.

  4. Tải hoạt động tạo ConversionAdjustment lên ConversionAdjustmentUploadService, cài đặt partial_failure đến true.

  5. Xem lại tệp tải lên.

Các phương pháp hay nhất

Hãy lưu ý các phương pháp hay nhất sau đây khi triển khai tính năng lượt chuyển đổi nâng cao cho web.

Kiểm tra mã nhận dạng khách hàng

Khi bạn tải lượt chuyển đổi lên, mã khách hàng phải được đặt thành tài khoản chứa hành động chuyển đổi và theo dõi lượt chuyển đổi. Để kiểm tra chế độ cài đặt này, truy vấn quảng cáo phân phát Google Ads Customer tài nguyên dành cho ConversionTrackingSetting. Vấn đề truy vấn sau với GoogleAdsService.SearchStream! để tìm giá trị của customer.conversion_tracking_setting.google_ads_conversion_customer.

SELECT
  customer.conversion_tracking_setting.google_ads_conversion_customer,
  customer.conversion_tracking_setting.conversion_tracking_status,
  customer.conversion_tracking_setting.conversion_tracking_id,
  customer.conversion_tracking_setting.cross_account_conversion_tracking_id
FROM customer

Đặt customer_id thành giá trị google_ads_conversion_customer trong các yêu cầu để tải lượt chuyển đổi lên.

Cung cấp nhiều giá trị nhận dạng (nếu có)

Nếu bạn có GCLID cho một lượt chuyển đổi, bạn nên gửi GCLID đó cùng với user_identifiers để cải thiện hiệu suất. Ngoài ra, nếu có nhiều hơn một UserIdentifier cho lượt chuyển đổi, bao gồm nhiều cột có thể cải thiện khả năng trùng khớp. Bao gồm tất cả giá trị nhận dạng trên cùng một giá trị nhận dạng ConversionAdjustment.

Xem xét các lỗi không thực hiện được một phần khi thiết lập quy trình tích hợp

Khi thiết lập tính năng tích hợp tính năng lượt chuyển đổi nâng cao cho web lần đầu tiên, xem lại và giải quyết mọi lỗi một phần trong partial_failure_error của trường phản hồi. Nếu có vấn đề trong quá trình thiết lập, bạn có thể kiểm tra vấn đề này để điều tra và giải quyết chúng. Để biết thêm chi tiết và ví dụ về xử lý lỗi một phần, truy cập trang lỗi một phần cụ thể hướng dẫn.

Sau khi bạn giải quyết mọi vấn đề xuất hiện trong lỗi không thành công một phần và quá trình tích hợp hoàn tất, hãy chuyển sang sử dụng tính năng chẩn đoán dữ liệu ngoại tuyến để thường xuyên xem xét tình trạng của lượt chuyển đổi.

Tạo nhiều mức điều chỉnh trong một yêu cầu duy nhất

Nếu bạn có nhiều điều chỉnh cần tải lên, hãy nhóm các thao tác thành một nhóm UploadConversionAdjustmentsRequest! thay vì gửi một yêu cầu tải lên cho mỗi mức điều chỉnh.

Kiểm tra hạn mức hướng dẫn dành cho giới hạn về số lần điều chỉnh trên mỗi yêu cầu. Nếu bạn muốn dữ liệu ngoại tuyến chẩn đoán để nhóm các yêu cầu cho cùng một công việc logic, hãy đặt giá trị job_id trong số tất cả yêu cầu có cùng giá trị.

Chuẩn bị dữ liệu để tải lên

Để cân nhắc về quyền riêng tư, bạn phải băm dữ liệu sau đây bằng thuật toán SHA-256 trước khi được tải lên:

  • Địa chỉ email
  • Số điện thoại
  • Tên
  • Họ
  • Địa chỉ đường phố

Không băm dữ liệu sau đây:

  • Quốc gia
  • Tiểu bang
  • Thành phố
  • Mã vùng

Để chuẩn hoá kết quả băm, bạn phải thực hiện những việc sau đây trước khi băm một trong các giá trị sau:

  • Xoá khoảng trắng ở đầu và cuối.
  • Chuyển đổi văn bản thành chữ thường.
  • Định dạng số điện thoại theo tiêu chuẩn E164 chuẩn.
  • Xoá tất cả dấu chấm (.) đứng trước tên miền trong gmail.comgooglemail.com địa chỉ email.

Java

private String normalizeAndHash(MessageDigest digest, String s, boolean trimIntermediateSpaces)
    throws UnsupportedEncodingException {
  // Normalizes by first converting all characters to lowercase, then trimming spaces.
  String normalized = s.toLowerCase();
  if (trimIntermediateSpaces) {
    // Removes leading, trailing, and intermediate spaces.
    normalized = normalized.replaceAll("\\s+", "");
  } else {
    // Removes only leading and trailing spaces.
    normalized = normalized.trim();
  }
  // Hashes the normalized string using the hashing algorithm.
  byte[] hash = digest.digest(normalized.getBytes("UTF-8"));
  StringBuilder result = new StringBuilder();
  for (byte b : hash) {
    result.append(String.format("%02x", b));
  }

  return result.toString();
}

/**
 * Returns the result of normalizing and hashing an email address. For this use case, Google Ads
 * requires removal of any '.' characters preceding {@code gmail.com} or {@code googlemail.com}.
 *
 * @param digest the digest to use to hash the normalized string.
 * @param emailAddress the email address to normalize and hash.
 */
private String normalizeAndHashEmailAddress(MessageDigest digest, String emailAddress)
    throws UnsupportedEncodingException {
  String normalizedEmail = emailAddress.toLowerCase();
  String[] emailParts = normalizedEmail.split("@");
  if (emailParts.length > 1 && emailParts[1].matches("^(gmail|googlemail)\\.com\\s*")) {
    // Removes any '.' characters from the portion of the email address before the domain if the
    // domain is gmail.com or googlemail.com.
    emailParts[0] = emailParts[0].replaceAll("\\.", "");
    normalizedEmail = String.format("%s@%s", emailParts[0], emailParts[1]);
  }
  return normalizeAndHash(digest, normalizedEmail, true);
}
      

C#

/// <summary>
/// Normalizes the email address and hashes it. For this use case, Google Ads requires
/// removal of any '.' characters preceding <code>gmail.com</code> or
/// <code>googlemail.com</code>.
/// </summary>
/// <param name="emailAddress">The email address.</param>
/// <returns>The hash code.</returns>
private string NormalizeAndHashEmailAddress(string emailAddress)
{
    string normalizedEmail = emailAddress.ToLower();
    string[] emailParts = normalizedEmail.Split('@');
    if (emailParts.Length > 1 && (emailParts[1] == "gmail.com" ||
        emailParts[1] == "googlemail.com"))
    {
        // Removes any '.' characters from the portion of the email address before
        // the domain if the domain is gmail.com or googlemail.com.
        emailParts[0] = emailParts[0].Replace(".", "");
        normalizedEmail = $"{emailParts[0]}@{emailParts[1]}";
    }
    return NormalizeAndHash(normalizedEmail);
}

/// <summary>
/// Normalizes and hashes a string value.
/// </summary>
/// <param name="value">The value to normalize and hash.</param>
/// <returns>The normalized and hashed value.</returns>
private static string NormalizeAndHash(string value)
{
    return ToSha256String(digest, ToNormalizedValue(value));
}

/// <summary>
/// Hash a string value using SHA-256 hashing algorithm.
/// </summary>
/// <param name="digest">Provides the algorithm for SHA-256.</param>
/// <param name="value">The string value (e.g. an email address) to hash.</param>
/// <returns>The hashed value.</returns>
private static string ToSha256String(SHA256 digest, string value)
{
    byte[] digestBytes = digest.ComputeHash(Encoding.UTF8.GetBytes(value));
    // Convert the byte array into an unhyphenated hexadecimal string.
    return BitConverter.ToString(digestBytes).Replace("-", string.Empty);
}

/// <summary>
/// Removes leading and trailing whitespace and converts all characters to
/// lower case.
/// </summary>
/// <param name="value">The value to normalize.</param>
/// <returns>The normalized value.</returns>
private static string ToNormalizedValue(string value)
{
    return value.Trim().ToLower();
}
      

PHP

private static function normalizeAndHash(
    string $hashAlgorithm,
    string $value,
    bool $trimIntermediateSpaces
): string {
    // Normalizes by first converting all characters to lowercase, then trimming spaces.
    $normalized = strtolower($value);
    if ($trimIntermediateSpaces === true) {
        // Removes leading, trailing, and intermediate spaces.
        $normalized = str_replace(' ', '', $normalized);
    } else {
        // Removes only leading and trailing spaces.
        $normalized = trim($normalized);
    }
    return hash($hashAlgorithm, strtolower(trim($normalized)));
}

/**
 * Returns the result of normalizing and hashing an email address. For this use case, Google
 * Ads requires removal of any '.' characters preceding "gmail.com" or "googlemail.com".
 *
 * @param string $hashAlgorithm the hash algorithm to use
 * @param string $emailAddress the email address to normalize and hash
 * @return string the normalized and hashed email address
 */
private static function normalizeAndHashEmailAddress(
    string $hashAlgorithm,
    string $emailAddress
): string {
    $normalizedEmail = strtolower($emailAddress);
    $emailParts = explode("@", $normalizedEmail);
    if (
        count($emailParts) > 1
        && preg_match('/^(gmail|googlemail)\.com\s*/', $emailParts[1])
    ) {
        // Removes any '.' characters from the portion of the email address before the domain
        // if the domain is gmail.com or googlemail.com.
        $emailParts[0] = str_replace(".", "", $emailParts[0]);
        $normalizedEmail = sprintf('%s@%s', $emailParts[0], $emailParts[1]);
    }
    return self::normalizeAndHash($hashAlgorithm, $normalizedEmail, true);
}
      

Python

def normalize_and_hash_email_address(email_address):
    """Returns the result of normalizing and hashing an email address.

    For this use case, Google Ads requires removal of any '.' characters
    preceding "gmail.com" or "googlemail.com"

    Args:
        email_address: An email address to normalize.

    Returns:
        A normalized (lowercase, removed whitespace) and SHA-265 hashed string.
    """
    normalized_email = email_address.lower()
    email_parts = normalized_email.split("@")
    # Checks whether the domain of the email address is either "gmail.com"
    # or "googlemail.com". If this regex does not match then this statement
    # will evaluate to None.
    is_gmail = re.match(r"^(gmail|googlemail)\.com$", email_parts[1])

    # Check that there are at least two segments and the second segment
    # matches the above regex expression validating the email domain name.
    if len(email_parts) > 1 and is_gmail:
        # Removes any '.' characters from the portion of the email address
        # before the domain if the domain is gmail.com or googlemail.com.
        email_parts[0] = email_parts[0].replace(".", "")
        normalized_email = "@".join(email_parts)

    return normalize_and_hash(normalized_email)


def normalize_and_hash(s):
    """Normalizes and hashes a string with SHA-256.

    Private customer data must be hashed during upload, as described at:
    https://support.google.com/google-ads/answer/9888656

    Args:
        s: The string to perform this operation on.

    Returns:
        A normalized (lowercase, removed whitespace) and SHA-256 hashed string.
    """
    return hashlib.sha256(s.strip().lower().encode()).hexdigest()
      

Ruby

# Returns the result of normalizing and then hashing the string using the
# provided digest.  Private customer data must be hashed during upload, as
# described at https://support.google.com/google-ads/answer/9888656.
def normalize_and_hash(str)
  # Remove leading and trailing whitespace and ensure all letters are lowercase
  # before hasing.
  Digest::SHA256.hexdigest(str.strip.downcase)
end

# Returns the result of normalizing and hashing an email address. For this use
# case, Google Ads requires removal of any '.' characters preceding 'gmail.com'
# or 'googlemail.com'.
def normalize_and_hash_email(email)
  email_parts = email.downcase.split("@")
  # Removes any '.' characters from the portion of the email address before the
  # domain if the domain is gmail.com or googlemail.com.
  if email_parts.last =~ /^(gmail|googlemail)\.com\s*/
    email_parts[0] = email_parts[0].gsub('.', '')
  end
  normalize_and_hash(email_parts.join('@'))
end
      

Perl

sub normalize_and_hash {
  my $value                    = shift;
  my $trim_intermediate_spaces = shift;

  if ($trim_intermediate_spaces) {
    $value =~ s/\s+//g;
  } else {
    $value =~ s/^\s+|\s+$//g;
  }
  return sha256_hex(lc $value);
}

# Returns the result of normalizing and hashing an email address. For this use
# case, Google Ads requires removal of any '.' characters preceding 'gmail.com'
# or 'googlemail.com'.
sub normalize_and_hash_email_address {
  my $email_address = shift;

  my $normalized_email = lc $email_address;
  my @email_parts      = split('@', $normalized_email);
  if (scalar @email_parts > 1
    && $email_parts[1] =~ /^(gmail|googlemail)\.com\s*/)
  {
    # Remove any '.' characters from the portion of the email address before the
    # domain if the domain is 'gmail.com' or 'googlemail.com'.
    $email_parts[0] =~ s/\.//g;
    $normalized_email = sprintf '%s@%s', $email_parts[0], $email_parts[1];
  }
  return normalize_and_hash($normalized_email, 1);
}
      

Tải lượt chuyển đổi nâng cao lên

Các đoạn mã sau đây minh hoạ cách tạo hệ số điều chỉnh nâng cao có chứa mã đơn hàng cùng giá trị nhận dạng của địa chỉ email, số điện thoại và địa chỉ thực tế, đã tiêu chuẩn hoá và băm được áp dụng theo yêu cầu. Theo phương pháp hay nhất, hãy thêm gclid vào thông tin điều chỉnh nếu có.

Thêm giá trị nhận dạng người dùng vào Mức điều chỉnh lượt chuyển đổi

Java

// Creates a builder for constructing the enhancement adjustment.
ConversionAdjustment.Builder enhancementBuilder =
    ConversionAdjustment.newBuilder().setAdjustmentType(ConversionAdjustmentType.ENHANCEMENT);

// Extracts user email, phone, and address info from the raw data, normalizes and hashes it,
// then wraps it in UserIdentifier objects.
// Creates a separate UserIdentifier object for each. The data in this example is hardcoded, but
// in your application you might read the raw data from an input file.

// IMPORTANT: Since the identifier attribute of UserIdentifier
// (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier) is a
// oneof
// (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must set only ONE of
// hashedEmail, hashedPhoneNumber, mobileId, thirdPartyUserId, or addressInfo. Setting more
// than one of these attributes on the same UserIdentifier will clear all the other members
// of the oneof. For example, the following code is INCORRECT and will result in a
// UserIdentifier with ONLY a hashedPhoneNumber.
//
// UserIdentifier incorrectlyPopulatedUserIdentifier =
//     UserIdentifier.newBuilder()
//         .setHashedEmail("...")
//         .setHashedPhoneNumber("...")
//         .build();

Map<String, String> rawRecord =
    ImmutableMap.<String, String>builder()
        // Email address that includes a period (.) before the Gmail domain.
        .put("email", "alex.2@example.com")
        // Address that includes all four required elements: first name, last name, country
        // code, and postal code.
        .put("firstName", "Alex")
        .put("lastName", "Quinn")
        .put("countryCode", "US")
        .put("postalCode", "94045")
        // Phone number to be converted to E.164 format, with a leading '+' as required.
        .put("phone", "+1 800 5550102")
        // This example lets you input conversion details as arguments, but in reality you might
        // store this data alongside other user data, so we include it in this sample user
        // record.
        .put("orderId", orderId)
        .put("conversionActionId", Long.toString(conversionActionId))
        .put("conversionDateTime", conversionDateTime)
        .put("currencyCode", "USD")
        .put("userAgent", userAgent)
        .build();

// Creates a SHA256 message digest for hashing user identifiers in a privacy-safe way, as
// described at https://support.google.com/google-ads/answer/9888656.
MessageDigest sha256Digest = MessageDigest.getInstance("SHA-256");

// Creates a list for the user identifiers.
List<UserIdentifier> userIdentifiers = new ArrayList<>();

// Creates a user identifier using the hashed email address, using the normalize and hash method
// specifically for email addresses.
UserIdentifier emailIdentifier =
    UserIdentifier.newBuilder()
        // Optional: specify the user identifier source.
        .setUserIdentifierSource(UserIdentifierSource.FIRST_PARTY)
        // Uses the normalize and hash method specifically for email addresses.
        .setHashedEmail(normalizeAndHashEmailAddress(sha256Digest, rawRecord.get("email")))
        .build();
userIdentifiers.add(emailIdentifier);

// Checks if the record has a phone number, and if so, adds a UserIdentifier for it.
if (rawRecord.containsKey("phone")) {
  UserIdentifier hashedPhoneNumberIdentifier =
      UserIdentifier.newBuilder()
          .setHashedPhoneNumber(normalizeAndHash(sha256Digest, rawRecord.get("phone"), true))
          .build();
  // Adds the hashed phone number identifier to the UserData object's list.
  userIdentifiers.add(hashedPhoneNumberIdentifier);
}

// Checks if the record has all the required mailing address elements, and if so, adds a
// UserIdentifier for the mailing address.
if (rawRecord.containsKey("firstName")) {
  // Checks if the record contains all the other required elements of a mailing address.
  Set<String> missingAddressKeys = new HashSet<>();
  for (String addressKey : new String[] {"lastName", "countryCode", "postalCode"}) {
    if (!rawRecord.containsKey(addressKey)) {
      missingAddressKeys.add(addressKey);
    }
  }

  if (!missingAddressKeys.isEmpty()) {
    System.out.printf(
        "Skipping addition of mailing address information because the following required keys"
            + " are missing: %s%n",
        missingAddressKeys);
  } else {
    // Creates an OfflineUserAddressInfo object that contains all the required elements of a
    // mailing address.
    OfflineUserAddressInfo addressInfo =
        OfflineUserAddressInfo.newBuilder()
            .setHashedFirstName(
                normalizeAndHash(sha256Digest, rawRecord.get("firstName"), false))
            .setHashedLastName(normalizeAndHash(sha256Digest, rawRecord.get("lastName"), false))
            .setCountryCode(rawRecord.get("countryCode"))
            .setPostalCode(rawRecord.get("postalCode"))
            .build();
    UserIdentifier addressIdentifier =
        UserIdentifier.newBuilder().setAddressInfo(addressInfo).build();
    // Adds the address identifier to the UserData object's list.
    userIdentifiers.add(addressIdentifier);
  }
}

// Adds the user identifiers to the enhancement adjustment.
enhancementBuilder.addAllUserIdentifiers(userIdentifiers);
      

C#

// Normalize and hash the raw data, then wrap it in UserIdentifier objects.
// Create a separate UserIdentifier object for each. The data in this example is
// hardcoded, but in your application you might read the raw data from an input file.
//
// IMPORTANT: Since the identifier attribute of UserIdentifier
// (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier)
// is a oneof
// (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must set
// only ONE of hashed_email, hashed_phone_number, mobile_id, third_party_user_id,
// or address-info. Setting more than one of these attributes on the same UserIdentifier
// will clear all the other members of the oneof. For example, the following code is
// INCORRECT and will result in a UserIdentifier with ONLY a hashed_phone_number:
// UserIdentifier incorrectlyPopulatedUserIdentifier = new UserIdentifier()
// {
//         HashedEmail = "..."
//         HashedPhoneNumber = "..."
// }
UserIdentifier addressIdentifier = new UserIdentifier()
{
    AddressInfo = new OfflineUserAddressInfo()
    {
        HashedFirstName = NormalizeAndHash("Dana"),
        HashedLastName = NormalizeAndHash("Quinn"),
        HashedStreetAddress = NormalizeAndHash("1600 Amphitheatre Pkwy"),
        City = "Mountain View",
        State = "CA",
        PostalCode = "94043",
        CountryCode = "US"
    },
    // Optional: Specifies the user identifier source.
    UserIdentifierSource = UserIdentifierSource.FirstParty
};

// Creates a user identifier using the hashed email address.
UserIdentifier emailIdentifier = new UserIdentifier()
{
    UserIdentifierSource = UserIdentifierSource.FirstParty,
    // Uses the normalize and hash method specifically for email addresses.
    HashedEmail = NormalizeAndHashEmailAddress("dana@example.com")
};

// Adds the user identifiers to the enhancement adjustment.
enhancement.UserIdentifiers.AddRange(new[] { addressIdentifier, emailIdentifier });
      

PHP

// Creates the conversion enhancement.
$enhancement =
    new ConversionAdjustment(['adjustment_type' => ConversionAdjustmentType::ENHANCEMENT]);

// Extracts user email, phone, and address info from the raw data, normalizes and hashes it,
// then wraps it in UserIdentifier objects.
// Creates a separate UserIdentifier object for each. The data in this example is hardcoded,
// but in your application you might read the raw data from an input file.

// IMPORTANT: Since the identifier attribute of UserIdentifier
// (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier) is a
// oneof
// (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must set only ONE
// of hashedEmail, hashedPhoneNumber, mobileId, thirdPartyUserId, or addressInfo. Setting
// more than one of these attributes on the same UserIdentifier will clear all the other
// members of the oneof. For example, the following code is INCORRECT and will result in a
// UserIdentifier with ONLY a hashedPhoneNumber.
//
// $incorrectlyPopulatedUserIdentifier = new UserIdentifier([
//    'hashed_email' => '...',
//    'hashed_phone_number' => '...'
// ]);

$rawRecord = [
    // Email address that includes a period (.) before the Gmail domain.
    'email' => 'alex.2@example.com',
    // Address that includes all four required elements: first name, last name, country
    // code, and postal code.
    'firstName' => 'Alex',
    'lastName' => 'Quinn',
    'countryCode' => 'US',
    'postalCode' => '94045',
    // Phone number to be converted to E.164 format, with a leading '+' as required.
    'phone' => '+1 800 5550102',
    // This example lets you input conversion details as arguments, but in reality you might
    // store this data alongside other user data, so we include it in this sample user
    // record.
    'orderId' => $orderId,
    'conversionActionId' => $conversionActionId,
    'conversionDateTime' => $conversionDateTime,
    'currencyCode' => 'USD'
];

// Creates a list for the user identifiers.
$userIdentifiers = [];

// Uses the SHA-256 hash algorithm for hashing user identifiers in a privacy-safe way, as
// described at https://support.google.com/google-ads/answer/9888656.
$hashAlgorithm = "sha256";

// Creates a user identifier using the hashed email address, using the normalize and hash
// method specifically for email addresses.
$emailIdentifier = new UserIdentifier([
    // Uses the normalize and hash method specifically for email addresses.
    'hashed_email' => self::normalizeAndHashEmailAddress(
        $hashAlgorithm,
        $rawRecord['email']
    ),
    // Optional: Specifies the user identifier source.
    'user_identifier_source' => UserIdentifierSource::FIRST_PARTY
]);
$userIdentifiers[] = $emailIdentifier;

// Checks if the record has a phone number, and if so, adds a UserIdentifier for it.
if (array_key_exists('phone', $rawRecord)) {
    $hashedPhoneNumberIdentifier = new UserIdentifier([
        'hashed_phone_number' => self::normalizeAndHash(
            $hashAlgorithm,
            $rawRecord['phone'],
            true
        )
    ]);
    // Adds the hashed email identifier to the user identifiers list.
    $userIdentifiers[] = $hashedPhoneNumberIdentifier;
}

// Checks if the record has all the required mailing address elements, and if so, adds a
// UserIdentifier for the mailing address.
if (array_key_exists('firstName', $rawRecord)) {
    // Checks if the record contains all the other required elements of a mailing
    // address.
    $missingAddressKeys = [];
    foreach (['lastName', 'countryCode', 'postalCode'] as $addressKey) {
        if (!array_key_exists($addressKey, $rawRecord)) {
            $missingAddressKeys[] = $addressKey;
        }
    }
    if (!empty($missingAddressKeys)) {
        printf(
            "Skipping addition of mailing address information because the "
            . "following required keys are missing: %s%s",
            json_encode($missingAddressKeys),
            PHP_EOL
        );
    } else {
        // Creates an OfflineUserAddressInfo object that contains all the required
        // elements of a mailing address.
        $addressIdentifier = new UserIdentifier([
            'address_info' => new OfflineUserAddressInfo([
                'hashed_first_name' => self::normalizeAndHash(
                    $hashAlgorithm,
                    $rawRecord['firstName'],
                    false
                ),
                'hashed_last_name' => self::normalizeAndHash(
                    $hashAlgorithm,
                    $rawRecord['lastName'],
                    false
                ),
                'country_code' => $rawRecord['countryCode'],
                'postal_code' => $rawRecord['postalCode']
            ])
        ]);
        // Adds the address identifier to the user identifiers list.
        $userIdentifiers[] = $addressIdentifier;
    }
}

// Adds the user identifiers to the conversion.
$enhancement->setUserIdentifiers($userIdentifiers);
      

Python

# Extracts user email, phone, and address info from the raw data, normalizes
# and hashes it, then wraps it in UserIdentifier objects. Creates a separate
# UserIdentifier object for each. The data in this example is hardcoded, but
# in your application you might read the raw data from an input file.

# IMPORTANT: Since the identifier attribute of UserIdentifier
# (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier)
# is a oneof
# (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must
# set only ONE of hashed_email, hashed_phone_number, mobile_id,
# third_party_user_id, or address_info. Setting more than one of these
# attributes on the same UserIdentifier will clear all the other members of
# the oneof. For example, the following code is INCORRECT and will result in
# a UserIdentifier with ONLY a hashed_phone_number:
#
# incorrectly_populated_user_identifier = client.get_type("UserIdentifier")
# incorrectly_populated_user_identifier.hashed_email = "...""
# incorrectly_populated_user_identifier.hashed_phone_number = "...""

raw_record = {
    # Email address that includes a period (.) before the Gmail domain.
    "email": "alex.2@example.com",
    # Address that includes all four required elements: first name, last
    # name, country code, and postal code.
    "first_name": "Alex",
    "last_name": "Quinn",
    "country_code": "US",
    "postal_code": "94045",
    # Phone number to be converted to E.164 format, with a leading '+' as
    # required.
    "phone": "+1 800 5550102",
    # This example lets you input conversion details as arguments, but in
    # reality you might store this data alongside other user data, so we
    # include it in this sample user record.
    "order_id": order_id,
    "conversion_action_id": conversion_action_id,
    "conversion_date_time": conversion_date_time,
    "currency_code": "USD",
    "user_agent": user_agent,
}

# Constructs the enhancement adjustment.
conversion_adjustment = client.get_type("ConversionAdjustment")
conversion_adjustment.adjustment_type = (
    client.enums.ConversionAdjustmentTypeEnum.ENHANCEMENT
)

# Creates a user identifier using the hashed email address, using the
# normalize and hash method specifically for email addresses.
email_identifier = client.get_type("UserIdentifier")
# Optional: Specifies the user identifier source.
email_identifier.user_identifier_source = (
    client.enums.UserIdentifierSourceEnum.FIRST_PARTY
)
# Uses the normalize and hash method specifically for email addresses.
email_identifier.hashed_email = normalize_and_hash_email_address(
    raw_record["email"]
)
# Adds the email identifier to the conversion adjustment.
conversion_adjustment.user_identifiers.append(email_identifier)

# Checks if the record has a phone number, and if so, adds a UserIdentifier
# for it.
if raw_record.get("phone") is not None:
    phone_identifier = client.get_type("UserIdentifier")
    phone_identifier.hashed_phone_number = normalize_and_hash(
        raw_record["phone"]
    )
    # Adds the phone identifier to the conversion adjustment.
    conversion_adjustment.user_identifiers.append(phone_identifier)

# Checks if the record has all the required mailing address elements, and if
# so, adds a UserIdentifier for the mailing address.
if raw_record.get("first_name") is not None:
    # Checks if the record contains all the other required elements of a
    # mailing address.
    required_keys = ["last_name", "country_code", "postal_code"]
    # Builds a new list of the required keys that are missing from
    # raw_record.
    missing_keys = [
        key for key in required_keys if key not in raw_record.keys()
    ]
    if len(missing_keys) > 0:
        print(
            "Skipping addition of mailing address information because the"
            f"following required keys are missing: {missing_keys}"
        )
    else:
        # Creates a user identifier using sample values for the user address,
        # hashing where required.
        address_identifier = client.get_type("UserIdentifier")
        address_info = address_identifier.address_info
        address_info.hashed_first_name = normalize_and_hash(
            raw_record["first_name"]
        )
        address_info.hashed_last_name = normalize_and_hash(
            raw_record["last_name"]
        )
        address_info.country_code = raw_record["country_code"]
        address_info.postal_code = raw_record["postal_code"]
        # Adds the address identifier to the conversion adjustment.
        conversion_adjustment.user_identifiers.append(address_identifier)
      

Ruby

# Extracts user email, phone, and address info from the raw data, normalizes
# and hashes it, then wraps it in UserIdentifier objects. Creates a separate
# UserIdentifier object for each. The data in this example is hardcoded, but
# in your application you might read the raw data from an input file.

# IMPORTANT: Since the identifier attribute of UserIdentifier
# (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier)
# is a oneof
# (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must
# set only ONE of hashed_email, hashed_phone_number, mobile_id,
# third_party_user_id, or address_info. Setting more than one of these
# attributes on the same UserIdentifier will clear all the other members of
# the oneof. For example, the following code is INCORRECT and will result in
# a UserIdentifier with ONLY a hashed_phone_number:
#
# incorrectly_populated_user_identifier.hashed_email = "...""
# incorrectly_populated_user_identifier.hashed_phone_number = "...""

raw_record = {
    # Email address that includes a period (.) before the Gmail domain.
    "email" => "alex.2@example.com",
    # Address that includes all four required elements: first name, last
    # name, country code, and postal code.
    "first_name" => "Alex",
    "last_name" => "Quinn",
    "country_code" => "US",
    "postal_code" => "94045",
    # Phone number to be converted to E.164 format, with a leading '+' as
    # required.
    "phone" => "+1 800 5550102",
    # This example lets you input conversion details as arguments, but in
    # reality you might store this data alongside other user data, so we
    # include it in this sample user record.
    "order_id" => order_id,
    "conversion_action_id" => conversion_action_id,
    "conversion_date_time" => conversion_date_time,
    "currency_code" => "USD",
    "user_agent" => user_agent,
}

enhancement = client.resource.conversion_adjustment do |ca|
  ca.conversion_action = client.path.conversion_action(customer_id, conversion_action_id)
  ca.adjustment_type = :ENHANCEMENT
  ca.order_id = order_id

  # Sets the conversion date and time if provided. Providing this value is
  # optional but recommended.
  unless conversion_date_time.nil?
    ca.gclid_date_time_pair = client.resource.gclid_date_time_pair do |pair|
      pair.conversion_date_time = conversion_date_time
    end
  end

  # Creates a user identifier using the hashed email address, using the
  # normalize and hash method specifically for email addresses.
  ca.user_identifiers << client.resource.user_identifier do |ui|
    # Uses the normalize and hash method specifically for email addresses.
    ui.hashed_email = normalize_and_hash_email(raw_record["email"])
    # Optional: Specifies the user identifier source.
    ui.user_identifier_source = :FIRST_PARTY
  end

  # Checks if the record has a phone number, and if so, adds a UserIdentifier
  # for it.
  unless raw_record["phone"].nil?
    ca.user_identifiers << client.resource.user_identifier do |ui|
      ui.hashed_phone_number = normalize_and_hash_email(raw_record["phone"])
    end
  end

  # Checks if the record has all the required mailing address elements, and if
  # so, adds a UserIdentifier for the mailing address.
  unless raw_record["first_name"].nil?
    # Checks if the record contains all the other required elements of a
    # mailing address.
    required_keys = ["last_name", "country_code", "postal_code"]
    # Builds a new list of the required keys that are missing from
    # raw_record.
    missing_keys = required_keys - raw_record.keys
    if missing_keys
        puts(
            "Skipping addition of mailing address information because the" \
            "following required keys are missing: #{missing_keys}"
        )
    else
      ca.user_identifiers << client.resource.user_identifier do |ui|
        ui.address_info = client.resource.offline_user_address_info do |info|
          # Certain fields must be hashed using SHA256 in order to handle
          # identifiers in a privacy-safe way, as described at
          # https://support.google.com/google-ads/answer/9888656.
          info.hashed_first_name = normalize_and_hash( raw_record["first_name"])
          info.hashed_last_name = normalize_and_hash( raw_record["last_name"])
          info.postal_code = normalize_and_hash(raw_record["country_code"])
          info.country_code = normalize_and_hash(raw_record["postal_code"])
        end
      end
    end
  end
      

Perl

# Construct the enhancement adjustment.
my $enhancement =
  Google::Ads::GoogleAds::V17::Services::ConversionAdjustmentUploadService::ConversionAdjustment
  ->new({
    adjustmentType => ENHANCEMENT
  });

# Extract user email, phone, and address info from the raw data,
# normalize and hash it, then wrap it in UserIdentifier objects.
# Create a separate UserIdentifier object for each.
# The data in this example is hardcoded, but in your application
# you might read the raw data from an input file.
#
# IMPORTANT: Since the identifier attribute of UserIdentifier
# (https://developers.google.com/google-ads/api/reference/rpc/latest/UserIdentifier)
# is a oneof
# (https://protobuf.dev/programming-guides/proto3/#oneof-features), you must set
# only ONE of hashed_email, hashed_phone_number, mobile_id, third_party_user_id,
# or address-info. Setting more than one of these attributes on the same UserIdentifier
# will clear all the other members of the oneof. For example, the following code is
# INCORRECT and will result in a UserIdentifier with ONLY a hashed_phone_number:
#
# my $incorrect_user_identifier = Google::Ads::GoogleAds::V17::Common::UserIdentifier->new({
#   hashedEmail => '...',
#   hashedPhoneNumber => '...',
# });
my $raw_record = {
  # Email address that includes a period (.) before the Gmail domain.
  email => 'alex.2@example.com',
  # Address that includes all four required elements: first name, last
  # name, country code, and postal code.
  firstName   => 'Alex',
  lastName    => 'Quinn',
  countryCode => 'US',
  postalCode  => '94045',
  # Phone number to be converted to E.164 format, with a leading '+' as
  # required.
  phone => '+1 800 5550102',
  # This example lets you input conversion details as arguments,
  # but in reality you might store this data alongside other user data,
  # so we include it in this sample user record.
  orderId            => $order_id,
  conversionActionId => $conversion_action_id,
  conversionDateTime => $conversion_date_time,
  currencyCode       => "USD",
  userAgent          => $user_agent,
};
my $user_identifiers = [];

# Create a user identifier using the hashed email address, using the normalize
# and hash method specifically for email addresses.
my $hashed_email = normalize_and_hash_email_address($raw_record->{email});
push(
  @$user_identifiers,
  Google::Ads::GoogleAds::V17::Common::UserIdentifier->new({
      hashedEmail => $hashed_email,
      # Optional: Specify the user identifier source.
      userIdentifierSource => FIRST_PARTY
    }));

# Check if the record has a phone number, and if so, add a UserIdentifier for it.
if (defined $raw_record->{phone}) {
  # Add the hashed phone number identifier to the list of UserIdentifiers.
  push(
    @$user_identifiers,
    Google::Ads::GoogleAds::V17::Common::UserIdentifier->new({
        hashedPhoneNumber => normalize_and_hash($raw_record->{phone}, 1)}));
}

# Confirm the record has all the required mailing address elements, and if so, add
# a UserIdentifier for the mailing address.
if (defined $raw_record->{firstName}) {
  my $required_keys = ["lastName", "countryCode", "postalCode"];
  my $missing_keys  = [];

  foreach my $key (@$required_keys) {
    if (!defined $raw_record->{$key}) {
      push(@$missing_keys, $key);
    }
  }

  if (@$missing_keys) {
    print
      "Skipping addition of mailing address information because the following"
      . "keys are missing: "
      . join(",", @$missing_keys);
  } else {
    push(
      @$user_identifiers,
      Google::Ads::GoogleAds::V17::Common::UserIdentifier->new({
          addressInfo =>
            Google::Ads::GoogleAds::V17::Common::OfflineUserAddressInfo->new({
              # First and last name must be normalized and hashed.
              hashedFirstName => normalize_and_hash($raw_record->{firstName}),
              hashedLastName  => normalize_and_hash($raw_record->{lastName}),
              # Country code and zip code are sent in plain text.
              countryCode => $raw_record->{countryCode},
              postalCode  => $raw_record->{postalCode},
            })}));
  }
}

# Add the user identifiers to the enhancement adjustment.
$enhancement->{userIdentifiers} = $user_identifiers;
      

Thêm thông tin chi tiết về lượt chuyển đổi vào Mức điều chỉnh lượt chuyển đổi

Java

// Sets the conversion action.
enhancementBuilder.setConversionAction(
    ResourceNames.conversionAction(
        customerId, Long.parseLong(rawRecord.get("conversionActionId"))));

// Sets the order ID. Enhancements MUST use order ID instead of GCLID date/time pair.
enhancementBuilder.setOrderId(rawRecord.get("orderId"));

// Sets the conversion date and time if provided. Providing this value is optional but
// recommended.
if (rawRecord.get("conversionDateTime") != null) {
  enhancementBuilder.setGclidDateTimePair(
      GclidDateTimePair.newBuilder()
          .setConversionDateTime(rawRecord.get("conversionDateTime")));
}

// Sets the user agent if provided. This should match the user agent of the request that sent
// the original conversion so the conversion and its enhancement are either both attributed as
// same-device or both attributed as cross-device.
if (rawRecord.get("userAgent") != null) {
  enhancementBuilder.setUserAgent(rawRecord.get("userAgent"));
}
      

C#

// Set the conversion action.
enhancement.ConversionAction =
    ResourceNames.ConversionAction(customerId, conversionActionId);

// Set the order ID. Enhancements MUST use order ID instead of GCLID date/time pair.
enhancement.OrderId = orderId;

// Sets the conversion date and time if provided. Providing this value is optional but
// recommended.
if (string.IsNullOrEmpty(conversionDateTime))
{
    enhancement.GclidDateTimePair = new GclidDateTimePair()
    {
        ConversionDateTime = conversionDateTime
    };
}

// Sets optional fields where a value was provided.
if (!string.IsNullOrEmpty(userAgent))
{
    // Sets the user agent. This should match the user agent of the request that
    // sent the original conversion so the conversion and its enhancement are either
    // both attributed as same-device or both attributed as cross-device.
    enhancement.UserAgent = userAgent;
}

      

PHP

// Sets the conversion action.
$enhancement->setConversionAction(
    ResourceNames::forConversionAction($customerId, $rawRecord['conversionActionId'])
);

// Sets the order ID. Enhancements MUST use order ID instead of GCLID date/time pair.
if (!empty($rawRecord['orderId'])) {
    $enhancement->setOrderId($rawRecord['orderId']);
}

// Sets the conversion date and time if provided. Providing this value is optional but
// recommended.
if (!empty($rawRecord['conversionDateTime'])) {
    // Sets the conversion date and time if provided. Providing this value is optional but
    // recommended.
    $enhancement->setGclidDateTimePair(new GclidDateTimePair([
        'conversion_date_time' => $rawRecord['conversionDateTime']
    ]));
}

// Sets the user agent if provided. This should match the user agent of the request that
// sent the original conversion so the conversion and its enhancement are either both
// attributed as same-device or both attributed as cross-device.
if (!empty($rawRecord['userAgent'])) {
    $enhancement->setUserAgent($rawRecord['userAgent']);
}
      

Python

conversion_action_service = client.get_service("ConversionActionService")
# Sets the conversion action.
conversion_adjustment.conversion_action = (
    conversion_action_service.conversion_action_path(
        customer_id, raw_record["conversion_action_id"]
    )
)

# Sets the order ID. Enhancements MUST use order ID instead of GCLID
# date/time pair.
conversion_adjustment.order_id = order_id

# Sets the conversion date and time if provided. Providing this value is
# optional but recommended.
if raw_record.get("conversion_date_time"):
    conversion_adjustment.gclid_date_time_pair.conversion_date_time = (
        raw_record["conversion_date_time"]
    )

# Sets optional fields where a value was provided
if raw_record.get("user_agent"):
    # Sets the user agent. This should match the user agent of the request
    # that sent the original conversion so the conversion and its
    # enhancement are either both attributed as same-device or both
    # attributed as cross-device.
    conversion_adjustment.user_agent = user_agent
      

Ruby

ca.conversion_action = client.path.conversion_action(customer_id, conversion_action_id)
ca.adjustment_type = :ENHANCEMENT
ca.order_id = order_id

# Sets the conversion date and time if provided. Providing this value is
# optional but recommended.
unless conversion_date_time.nil?
  ca.gclid_date_time_pair = client.resource.gclid_date_time_pair do |pair|
    pair.conversion_date_time = conversion_date_time
  end
end

# Creates a user identifier using the hashed email address, using the
# normalize and hash method specifically for email addresses.
ca.user_identifiers << client.resource.user_identifier do |ui|
  # Uses the normalize and hash method specifically for email addresses.
  ui.hashed_email = normalize_and_hash_email(raw_record["email"])
  # Optional: Specifies the user identifier source.
  ui.user_identifier_source = :FIRST_PARTY
end

# Checks if the record has a phone number, and if so, adds a UserIdentifier
# for it.
unless raw_record["phone"].nil?
  ca.user_identifiers << client.resource.user_identifier do |ui|
    ui.hashed_phone_number = normalize_and_hash_email(raw_record["phone"])
  end
end

# Checks if the record has all the required mailing address elements, and if
# so, adds a UserIdentifier for the mailing address.
unless raw_record["first_name"].nil?
  # Checks if the record contains all the other required elements of a
  # mailing address.
  required_keys = ["last_name", "country_code", "postal_code"]
  # Builds a new list of the required keys that are missing from
  # raw_record.
  missing_keys = required_keys - raw_record.keys
  if missing_keys
      puts(
          "Skipping addition of mailing address information because the" \
          "following required keys are missing: #{missing_keys}"
      )
  else
    ca.user_identifiers << client.resource.user_identifier do |ui|
      ui.address_info = client.resource.offline_user_address_info do |info|
        # Certain fields must be hashed using SHA256 in order to handle
        # identifiers in a privacy-safe way, as described at
        # https://support.google.com/google-ads/answer/9888656.
        info.hashed_first_name = normalize_and_hash( raw_record["first_name"])
        info.hashed_last_name = normalize_and_hash( raw_record["last_name"])
        info.postal_code = normalize_and_hash(raw_record["country_code"])
        info.country_code = normalize_and_hash(raw_record["postal_code"])
      end
    end
  end
end

# Sets optional fields where a value was provided.
unless user_agent.nil?
  # Sets the user agent. This should match the user agent of the request
  # that sent the original conversion so the conversion and its enhancement
  # are either both attributed as same-device or both attributed as
  # cross-device.
  ca.user_agent = user_agent
end
      

Perl

# Set the conversion action.
$enhancement->{conversionAction} =
  Google::Ads::GoogleAds::V17::Utils::ResourceNames::conversion_action(
  $customer_id, $raw_record->{conversionActionId});

# Set the order ID. Enhancements MUST use order ID instead of GCLID date/time pair.
$enhancement->{orderId} = $raw_record->{orderId};

# Set the conversion date and time if provided. Providing this value is optional
# but recommended.
if (defined $raw_record->{conversionDateTime}) {
  $enhancement->{gclidDateTimePair} =
    Google::Ads::GoogleAds::V17::Services::ConversionAdjustmentUploadService::GclidDateTimePair
    ->new({
      conversionDateTime => $raw_record->{conversionDateTime}});
}

# Set the user agent if provided. This should match the user agent of the
# request that sent the original conversion so the conversion and its enhancement
# are either both attributed as same-device or both attributed as cross-device.
if (defined $raw_record->{userAgent}) {
  $enhancement->{userAgent} = $raw_record->{userAgent};
}
      

Tải điều chỉnh chuyển đổi lên

Java

// Creates the conversion adjustment upload service client.
try (ConversionAdjustmentUploadServiceClient conversionUploadServiceClient =
    googleAdsClient.getLatestVersion().createConversionAdjustmentUploadServiceClient()) {
  // Uploads the enhancement adjustment. Partial failure should always be set to true.

  // NOTE: This request contains a single adjustment as a demonstration. However, if you have
  // multiple adjustments to upload, it's best to upload multiple adjustments per request
  // instead of sending a separate request per adjustment. See the following for per-request
  // limits:
  // https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_adjustment_upload_service
  UploadConversionAdjustmentsResponse response =
      conversionUploadServiceClient.uploadConversionAdjustments(
          UploadConversionAdjustmentsRequest.newBuilder()
              .setCustomerId(Long.toString(customerId))
              .addConversionAdjustments(enhancementBuilder)
              // Enables partial failure (must be true).
              .setPartialFailure(true)
              .build());
      

C#

// Uploads the enhancement adjustment. Partial failure should always be set to true.
//
// NOTE: This request contains a single adjustment as a demonstration.
// However, if you have multiple adjustments to upload, it's best to upload
// multiple adjustmenst per request instead of sending a separate request per
// adjustment. See the following for per-request limits:
// https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_adjust
UploadConversionAdjustmentsResponse response =
    conversionAdjustmentUploadService.UploadConversionAdjustments(
        new UploadConversionAdjustmentsRequest()
        {
            CustomerId = customerId.ToString(),
            ConversionAdjustments = { enhancement },
            // Enables partial failure (must be true).
            PartialFailure = true,
        });
      

PHP

// Issues a request to upload the conversion enhancement.
$conversionAdjustmentUploadServiceClient =
    $googleAdsClient->getConversionAdjustmentUploadServiceClient();
// NOTE: This request contains a single adjustment as a demonstration. However, if you have
// multiple adjustments to upload, it's best to upload multiple adjustments per request
// instead of sending a separate request per adjustment. See the following for per-request
// limits:
// https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_adjustment_upload_service
$response = $conversionAdjustmentUploadServiceClient->uploadConversionAdjustments(
    // Enables partial failure (must be true).
    UploadConversionAdjustmentsRequest::build($customerId, [$enhancement], true)
);
      

Python

# Creates the conversion adjustment upload service client.
conversion_adjustment_upload_service = client.get_service(
    "ConversionAdjustmentUploadService"
)
# Uploads the enhancement adjustment. Partial failure should always be set
# to true.
# NOTE: This request only uploads a single conversion, but if you have
# multiple conversions to upload, it's still best to upload them in a single
# request. See the following for per-request limits for reference:
# https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
response = conversion_adjustment_upload_service.upload_conversion_adjustments(
    customer_id=customer_id,
    conversion_adjustments=[conversion_adjustment],
    # Enables partial failure (must be true).
    partial_failure=True,
)
      

Ruby

response = client.service.conversion_adjustment_upload.upload_conversion_adjustments(
  customer_id: customer_id,
  # NOTE: This request only uploads a single conversion, but if you have
  # multiple conversions to upload, it's still best to upload them in a single
  # request. See the following for per-request limits for reference:
  # https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_upload_service
  conversion_adjustments: [enhancement],
  # Partial failure must be set to true.
  partial_failure: true,
)
      

Perl

# Upload the enhancement adjustment. Partial failure should always be set to true.
#
# NOTE: This request contains a single adjustment as a demonstration.
# However, if you have multiple adjustments to upload, it's best to
# upload multiple adjustments per request instead of sending a separate
# request per adjustment. See the following for per-request limits:
# https://developers.google.com/google-ads/api/docs/best-practices/quotas#conversion_adjustment_upload_service
my $response =
  $api_client->ConversionAdjustmentUploadService()
  ->upload_conversion_adjustments({
    customerId            => $customer_id,
    conversionAdjustments => [$enhancement],
    # Enable partial failure (must be true).
    partialFailure => "true"
  });
      

Xem lại các tệp bạn đã tải lên

Sử dụng tính năng chẩn đoán dữ liệu ngoại tuyến để xem xét tổng thể tình trạng của các video tải lên gần đây. Xin lưu ý rằng việc tải lên thành công không nhất thiết có nghĩa là nội dung tải lên có kết quả trùng khớp.

Khi báo cáo về chỉ số chuyển đổi cho chiến dịch của bạn, hãy tham khảo bài viết Liên kết người dùng các chỉ số giao diện để liên kết giao diện người dùng Google Ads chỉ số có các trường báo cáo của API Google Ads. Bạn cũng có thể truy vấn Tài nguyên conversion_action để xem tổng số lượng chuyển đổi và tổng giá trị chuyển đổi của một lượt chuyển đổi nhất định hành động.