Identifying Annual First Day of No Snow Cover

Edit on GitHub
Report issue
Page history
Author(s): aharmstrong
This tutorial demonstrates how to produce annual maps depicting the first day within a year where a given pixel reaches zero percent snow cover and provides suggestions for summarizing and visualizing the results over time and space.

Patterns of snowmelt timing are represented here by the first day in 2018 where each pixel no longer contained snow, as detected by the MODIS daily snow cover product. The color grades from purple (earlier) to yellow (later) as the first day of the year with zero percent snow per pixel increases (Arctic Polar Stereographic projection).


The timing of annual seasonal snowmelt and any potential change in that timing has broad ecological implications and thus impacts human livelihoods, particularly in and around high latitude and mountainous systems.

One of the most important phases of the hydrologic cycle within these regions, the annual melting of accumulated winter snowfall provides the dominant source of water for streamflow and groundwater recharge for approximately one sixth of the global population (Musselman et al., 2017; Barnhart et al., 2016; Bengtsson, 1976).

The timing of snowmelt in the Arctic and Antarctic influences the length of the growing season; and consistent snow cover throughout the winter insulates vegetation from harsh temperatures and wind (Duchesne et al., 2012; Kudo et al., 1999). In mountainous regions such as the Himalayas, snowmelt is a major source of freshwater downstream (Barnhart et al., 2016) and is essential in recharging groundwater.

This seasonal water resource is one of the fastest changing hydrologic systems under Earth’s warming climate, and will broadly impact regional economies, ecosystem function and increase the potential for flood hazards (Musselman et al., 2017; IPCC, 2007; Beniston, 2012; Allan and Casillo, 2007; Barnett and Lettenmaier, 2005).

The anticipated warmer temperatures will alter the type and onset of precipitation; multiple regions, including the Rocky Mountains of North America have already measured a reduction in snowpack volume and warmer temperatures have shifted precipitation from snowfall to rain, causing snowmelt to occur earlier (Barnhart et al., 2016; Clow, 2010; Harpold et al., 2012).

This tutorial calculates the first day of no snow annually at the pixel level, providing the user with the ability to track the seasonal and interannual variability in the timing of snowmelt toward a better understanding of how the hydrological cycles of higher latitude and mountainous regions are responding to climate change.

Identify first day of zero percent snow cover

This section covers building an image collection where each image is a mosaic of pixels that describe the first day in a given year that zero percent snow cover is recorded. Snow cover is defined by the MODIS NDSI Snow Cover product. The general workflow is as follows:

  1. Define the date ranges to consider for analysis.
  2. Define a function that adds date information as bands to snow cover images.
  3. Define an analysis mask.
  4. For each year:
    1. Filter the image collection to observations from the given year.
    2. Add date bands to the filtered images.
    3. Identify the first day of the year without any snow per pixel.
    4. Apply an analysis mask to the image mosaic.
    5. Summarize the findings with a series of visualizations.

1. Define date range

Define the day-of-year (DOY) to start the search for the first day with zero percent snow cover. For applications in the northern hemisphere, you will likely want to start with January 1st (DOY 1). However, if you are studying snowmelt timing in the southern hemisphere (e.g., the Andes), where snowmelt can occur on dates either side of the new year, it is more appropriate to start the year on July 1st (DOY 183), for instance. In this calculation, a year is defined as the 365 days beginning from the provided startDay.

var startDoy = 1;

Define the year to start and end tracking snow cover fraction. All years in the range will be included in the analysis.

var startYear = 2000;
var endYear = 2019;

2. Define date bands

Define a function to add several date bands to the images; they will be used in a future step. Each image has a metadata timestamp property, but since we will be creating annual image mosaics composed of pixels from many different images, the date needs to be encoded per pixel as a value in an image band so that it is retained in the final mosaics. The function encodes:

  • Calendar DOY (calDoy): enumerated DOY from January 1st
  • Relative DOY (relDoy): enumerated DOY from user-defined startDoy
  • Milliseconds from Unix epoch (millis)
  • Year (year) - Note that the year is tied to the startDoy e.g., if startDoy is set at 183, the analysis will cross the new year, the year given to all pixels will be the first year, even if a particular image was collected on January 1 of the subsequent year.

Note that two global variables are initialized (startDate and startYear) that will be redefined iteratively in a subsequent step.

var startDate;
var startYear;

function addDateBands(img) {
  // Get image date.
  var date =;
  // Get calendar day-of-year.
  var calDoy = date.getRelative('day', 'year');
  // Get relative day-of-year; enumerate from user-defined startDoy.
  var relDoy = date.difference(startDate, 'day');
  // Get the date as milliseconds from Unix epoch.
  var millis = date.millis();
  // Add all of the above date info as bands to the snow fraction image.
  var dateBands = ee.Image.constant([calDoy, relDoy, millis, startYear])
    .rename(['calDoy', 'relDoy', 'millis', 'year']);
  // Cast bands to correct data type before returning the image.
  return img.addBands(dateBands)
    .cast({'calDoy': 'int', 'relDoy': 'int', 'millis': 'long', 'year': 'int'})
    .set('millis', millis);

3. Define an analysis mask

Here is the opportunity to define a mask for your analysis. This mask can be used to constrain the analysis to certain latitudes (ee.Image.pixelLonLat()), land cover types, geometries, etc. In this case we will: 1) mask out water so that the analysis is confined to pixels over landforms only; 2) mask out pixels that have very few days of snow cover; 3) mask out pixels that are snow covered for a good deal of the year (e.g., glaciers).

Import the MODIS water/land mask dataset, select the ‘water_mask’ band, and set all land pixels to value 1:

var waterMask = ee.Image('MODIS/MOD44W/MOD44W_005_2000_02_24')

Import the MODIS Snow Cover Daily Global 500m product and select the 'NDSI_Snow_Cover' band.

Note that this dataset is used in following sections. If you decide not to do any analysis masking, you must still include and run this line before the start of the next section.

var completeCol = ee.ImageCollection('MODIS/006/MOD10A1')

Mask pixels based on frequency of snow cover:

// Pixels must have been 10% snow covered for at least 2 weeks in 2018.
var snowCoverEphem = completeCol.filterDate('2018-01-01', '2019-01-01')
  .map(function(img) {
    return img.gte(10);

// Pixels must not be 10% snow covered more than 124 days in 2018.
var snowCoverConst = completeCol.filterDate('2018-01-01', '2019-01-01')
  .map(function(img) {
    return img.gte(10);

Combine the water mask and the snow cover frequency masks:

var analysisMask = waterMask.multiply(snowCoverEphem).multiply(snowCoverConst);

4. Identify the first day of the year without snow per pixel, per year

Make a list of the years to process; input variables were defined in step 1:

var years = ee.List.sequence(startYear, endYear);

Map the following function over the list of years. For each year, identify the first day with zero percent snow cover.

  1. Define the start and end dates to filter the dataset for the given year.
  2. Filter the image collection by the date range.
  3. Add the date bands to each image in the filtered collection.
  4. Sort the filtered collection by date. (Note: to determine the first day with snow accumulation in the fall, reverse sort the filtered collection.)
  5. Make a mosaic using the min reducer to select the pixel with 0 (minimum) snow cover. Since the collection is sorted by date, the first image with 0 snow cover is selected. This operation is conducted per-pixel to build the complete image mosaic.
  6. Apply the analysis mask to the resulting mosaic.

An ee.List of images is returned.

var annualList = {
  // Set the global startYear variable as the year being worked on so that
  // it will be accessible to the addDateBands mapped to the collection below.
  startYear = year;
  // Get the first day-of-year for this year as an ee.Date object.
  var firstDoy = ee.Date.fromYMD(year, 1, 1);
  // Advance from the firstDoy to the user-defined startDay; subtract 1 since
  // firstDoy is already 1. Set the result as the global startDate variable so
  // that it is accessible to the addDateBands mapped to the collection below.
  startDate = firstDoy.advance(startDoy-1, 'day');
  // Get endDate for this year by advancing 1 year from startDate.
  // Need to advance an extra day because end date of filterDate() function
  // is exclusive.
  var endDate = startDate.advance(1, 'year').advance(1, 'day');
  // Filter the complete collection by the start and end dates just defined.
  var yearCol = completeCol.filterDate(startDate, endDate);
  // Construct an image where pixels represent the first day within the date
  // range that the lowest snow fraction is observed.
  var noSnowImg = yearCol
    // Add date bands to all images in this particular collection.
    // Sort the images by ascending time to identify the first day without
    // snow. Alternatively, you can use .sort('millis', false) to
    // reverse sort (find first day of snow in the fall).
    // Make a mosaic composed of pixels from images that represent the
    // observation with the minimum percent snow cover (defined by the
    // NDSI_Snow_Cover band); include all associated bands for the selected
    // image.
    // Rename the bands - band names were altered by previous operation.
    .rename(['snowCover', 'calDoy', 'relDoy', 'millis', 'year'])
    // Apply the mask.
    // Set the year as a property for filtering by later.
    .set('year', year);

  // Mask by minimum snow fraction - only include pixels that reach 0
  // percent cover. Return the resulting image.
  return noSnowImg.updateMask('snowCover').eq(0));

Convert the ee.List of images to an image collection:

var annualCol = ee.ImageCollection.fromImages(annualList);

Data summary and visualization

The following are a series of examples for how to display and explore the first DOY with no snow dataset you just generated.


  • These examples refer to the calendar date (calDoy band) when displaying and incorporating date information in calculations. If you are using a date range that begins on any day other than January 1 (DOY = 1) you may want to replace calDoy with relDoy in all cases below.

  • Results may appear different as you zoom in and out of the map because of tile aggregation. It is best to view map data interactively with a relatively high zoom level. Additionally, for any analysis where a function provides a scale parameter (e.g., region reduction, exporting results), it is best to define it with the native resolution of the dataset (500m).

  • MODIS cloud masking can influence results. If there are a number of sequentially masked image pixel observations (clouds, poor quality), the actual date of the first observation with zero percent snow cover may be earlier than identified in the image time series. Regional patterns may be less influenced by this bias than local results. For local results, please inspect image masks to understand their influence on the dates near snowmelt timing.

Single-year map

Filter a single year (2018 in the example below) from the collection and display the image to the Map to see spatial patterns of snowmelt timing. Setting the min and max parameters of the visArgs variable to a narrow range around expected snowmelt timing is important for getting a good color stretch.

// Define a year to visualize.
var thisYear = 2018;

// Define visualization arguments.
var visArgs = {
  bands: ['calDoy'],
  min: 150,
  max: 200,
  palette: [
    '0D0887', '5B02A3', '9A179B', 'CB4678', 'EB7852', 'FBB32F', 'F0F921']};

// Subset the year of interest.
var firstDayNoSnowYear = annualCol.filter(ee.Filter.eq('year', thisYear)).first();

// Map it.
Map.setCenter(-95.78, 59.451, 5);
Map.addLayer(firstDayNoSnowYear, visArgs, 'First day of no snow, 2018');

Running this code produces something similar to Figure 2. Color represents day-of-year when zero percent snow cover was first experienced (blue is early, yellow is late). One can notice a number of interesting patterns. Frozen lakes have been shown to decrease air temperatures in adjacent pixels, resulting in delayed snow melt (Rouse et al., 1997; Salomonson and Appel, 2004; Wang and Derksen, 2007).

Additionally, the protected estuaries of the Northwest Passages have earlier dates of no snow compared to the landscapes exposed to the currents and winds of the Northern Atlantic. Latitude, elevation and proximity to ocean currents are the strongest determinants in this region.

Note: pixels representing glaciers that did not get removed by the analysis mask can produce anomalies in the data. Since glaciers are generally snow covered, the day-of-year with the least snow cover (according to the MODIS snow cover product) is presented in the map. In the image below, this is evident in the abrupt transition from yellow to blue in alpine areas of Baffin island (blue pixels are glaciers in this case).

Figure 2. Thematic map representing the first day-of-year with zero percent snow cover. Color grades from blue to yellow as day-of-year increases.

Year-to-year difference map

Compare year-to-year difference in melt timing by selecting two years of interest from the collection and subtracting them. Here, we’re calculating the difference in melt timing between 2015 and 2005.

// Define the years to difference.
var firstYear = 2005;
var secondYear = 2015;

// Calculate difference image.
var firstImg = annualCol.filter(ee.Filter.eq('year', firstYear))
var secondImg = annualCol.filter(ee.Filter.eq('year', secondYear))
var dif = secondImg.subtract(firstImg);

// Define visualization arguments.
var visArgs = {
  min: -15,
  max: 15,
  palette: ['b2182b', 'ef8a62', 'fddbc7', 'f7f7f7', 'd1e5f0', '67a9cf', '2166ac']};

// Map it.
Map.setCenter(-95.78, 59.451, 5);
Map.addLayer(dif, visArgs, '2015-2005 first day no snow dif');

Running this code produces something similar to Figure 3. Color represents the difference between the 2015 and 2005 day-of-year when zero percent snow cover was first experienced (red is a negative change/an earlier no snow date in 2015, blue is a positive change/a later no snow date in 2015, white is no change/negligible change in no snow date in 2015).

Figure 3. Year-to-year (2015 - 2005) difference map of the Himalayan Mountains on the Nepal-China border. Color grades from red to blue, with red indicating an earlier date of no snow in 2015 and blue indicating a later date of no snow in 2015. White areas indicate little or no change.

Trend analysis map

It is also possible to identify trends in the shifting first DOY with no snow by calculating the slope through a pixel’s time series points. Here, the slope for each pixel is calculated with year as the x variable and y as first DOY with no snow.

// Calculate slope image.
var slope = annualCol.sort('year').select(['year', 'calDoy'])

// Define visualization arguments.
var visArgs = {
  min: -1,
  max: 1,
  palette: ['b2182b', 'ef8a62', 'fddbc7', 'f7f7f7',
            'd1e5f0', '67a9cf', '2166ac']};

// Map it.
Map.setCenter(-95.78, 59.451, 5);
Map.addLayer(slope, visArgs, '2000-2019 first day no snow slope');

The result is a map where red is a negative slope (progressively earlier first DOY with no snow), white is 0, and blue is positive (progressively later first DOY with no snow). In southern Norway and Sweden, the trend in first DOY with no snow between 2002 and 2019 appears to be influenced by various factors. Coastal areas exhibit progressively earlier first DOY of no snow than inland areas; however, high variability in slopes can be observed around fjords and in mountainous regions. This map reveals the complexity of seasonal snow dynamics in these areas.

Note that the goodness of fit is not measured here, nor is significance considered. Slope may indicate regional trends, but local trends should be investigated using a time series chart (see the next section). Inter-annual variability can be influenced by masked pixels, as described above.

Figure 4. Map representing the slope of first DOY with no snow cover between 2000 and 2019. The slope represents the overall trend. Color grades from red to blue as the slope in DOY increases. White indicates areas of little to no change.

Time series chart

To visually understand the temporal patterns of the first date of no snow through time, we can display our results in a time series chart. In this case, we’ve defined a 500m radius circle around a point of interest and calculated the annual mean first DOY with no snow for pixels within the region.

// Define an AOI.
var aoi = ee.Geometry.Point(-94.242, 65.79).buffer(1e4);
Map.addLayer(aoi, null, 'Area of interest');

// Calculate annual mean DOY of AOI.
var annualAoiMean ='calDoy').map(function(img) {
  var summary = img.reduceRegion({
    reducer: ee.Reducer.mean(),
    geometry: aoi,
    scale: 1e3,
    bestEffort: true,
    maxPixels: 1e14,
    tileScale: 4,
  return ee.Feature(null, summary).set('year', img.get('year'));

// Print chart to console.
var chart = ui.Chart.feature.byFeature(annualAoiMean, 'year', 'calDoy')
    title: 'Regional mean first day of year with no snow cover',
    legend: {position: 'none'},
    hAxis: {
      title: 'Year',
      format: '####'
    vAxis: {title: 'Day-of-year'}});

As is evident by the displayed results, the first day of no snow was mostly stable from 2000 to 2012. Following this, the day has become more erratic.

Figure 5. Regional annual mean first DOY with no snow time series.


Amanda Armstrong devised and directed tutorial development. Justin Braaten assisted in method implementation. Morgan Shelby asked the initial question that led to the development of the dataset and subsequent tutorial. All contributors provided text, code and analysis examples.


Allan, J.D. and Castillo, M.M., 2007. Stream ecology: structure and function of running waters. Springer Science & Business Media.

Barnhart, T.B., Molotch, N.P., Livneh, B., Harpold, A.A., Knowles, J.F. and Schneider, D., 2016. Snowmelt rate dictates streamflow. Geophysical Research Letters, 43(15), pp.8006-8016.

Bengtsson, L., 1976. Snowmelt estimated from energy budget studies. Hydrology Research, 7(1), pp.3-18.

Beniston, M., 2012. Impacts of climatic change on water and associated economic activities in the Swiss Alps. Journal of Hydrology, 412, pp.291-296.

Clow, D.W., 2010. Changes in the timing of snowmelt and streamflow in Colorado: a response to recent warming. Journal of Climate, 23(9), pp.2293-2306.

Duchesne, L., Houle, D. and D’Orangeville, L., 2012. Influence of climate on seasonal patterns of stem increment of balsam fir in a boreal forest of Québec, Canada. Agricultural and forest meteorology, 162, pp.108-114.

Harpold, A.A., Brooks, P.D., Rajogopalan, S., Heidebuchel, I., Jardine, A. and Stielstra, C., 2012. Changes in snowpack volume and snowmelt timing in the Intermountain West. Water Resources Research, 48(11).

IPCC Climate Change 2007: The Physical Science Basis (eds Solomon, S. et al.)(Cambridge Univ. Press, 2007).

Kudo, G., Nordenhäll, U. and Molau, U., 1999. Effects of snowmelt timing on leaf traits, leaf production, and shoot growth of alpine plants: comparisons along a snowmelt gradient in northern Sweden. Ecoscience, 6(3), pp.439-450.

Musselman, K.N., Clark, M.P., Liu, C., Ikeda, K. and Rasmussen, R., 2017. Slower snowmelt in a warmer world. Nature Climate Change, 7(3), pp.214-219.

Rouse, W.R., Douglas, M.S., Hecky, R.E., Hershey, A.E., Kling, G.W., Lesack, L., Marsh, P., McDonald, M., Nicholson, B.J., Roulet, N.T. and Smol, J.P., 1997. Effects of climate change on the freshwaters of arctic and subarctic North America. Hydrological processes, 11(8), pp.873-902.

Salomonson, V.V. and Appel, I., 2004. Estimating fractional snow cover from MODIS using the normalized difference snow index. Remote sensing of environment, 89(3), pp.351-360.

Wang, L. and Derksen, C., 2007. Detection of Pan-Arctic Terrestrial Snowmelt Onset from QuikSCAT, 2000–2005. In Proceedings of the 64th Eastern Snow Conference (pp. 37-43).