Enable turn-by-turn data feed

A turn-by-turn data feed provides navigation-only information to devices not designed for map-based navigation guidance. It provides upcoming maneuvers with elements you supply:

• icons (left, right, U-turn)
• turn numbers in roundabouts
• road names
• estimated distances and time to the next navigation step or final destination

You can use the turn-by-turn feed to create experiences where the full Navigation SDK UI is not appropriate, such as for small screen displays. For example, you might use this for two-wheeled vehicle riders, where you can project navigation-only guidance to help them reach their destinations faster and more confidently with minimal distractions.

Essential navigation display elements

The primary fields for each navigation step are the full road name, maneuver, and total distance of the step, which are available in GMSNavigationStepInfo.

For the overall trip, you may want to display the remaining time and distance to the current step or to the destination, all of which are available in GMSNavigationNavInfo. The image to the right shows an example of these essential navigation elements.

Set up an event listener

To use navigation-only data, you have to implement an event listener for the didChangeNavInfo event. Within the event listener, access trip and step information to provide turn by turn navigation to your users.

To implement event handlers, the view controller of the map must implement the GMSNavigatorListener protocol. For detailed information on handling events in the Navigation SDK for iOS, see Listen for navigation events.

Handling the didChangeNavInfo event

Create a listener for the didChangeNavInfo event to add turn-by-turn support to your app. In the event listener, use the following classes and enums to control turn-by-turn navigation:

• GMSNavigationNavInfo — Class defining information about the state of navigation.

• GMSNavigationStepInfo — Class defining information about a single step along a navigation route.

• GMSNavigationNavState — Enum defining the current state of a navigation, such as enroute, rerouting, or stopped.

• GMSNavigationDrivingSide — Enum defining whether this step is on a drive-on-right or drive-on-left route.

• GMSNavigationManeuver — Enum defining the navigation action to take, such as turn left or turn right.

Shown below are example event listeners for the didChangeNavInfo event:

  // ViewController.h
  @interface SomeViewController () <GMSNavigatorListener>

  @end

  // ViewController.m
  @implementation SomeViewController
  // Some initialization code.
  ... {
    ...
    [_mapView.navigator addListener:self];
    ...
  }

  #pragma mark GMSNavigatorListener
  - (void)navigator:(GMSNavigator *)navigator didUpdateNavInfo:(GMSNavigationNavInfo *)navInfo {
    // Get the current step information
    if (navInfo.navState == GMSNavigationNavStateEnroute) {
      GMSNavigationStepInfo *currentStep = navInfo.currentStep;
      if (currentStep) {
        ...
        roadNameLabel.text = currentStep.simpleRoadName;
        ...
      }
    }
    ...
  }

  // ViewController.swift
  class SomeViewController: UIViewController {
    ...
    mapView.navigator?.add(self);
    ...
  }

  extension SomeViewController: GMSNavigatorListener {
    func navigator(_ navigator: GMSNavigator,
                   didUpdateNavInfo navInfo: GMSNavigationNavInfo) {

      // Get the current step information
      if navInfo.navState == .enroute {
        if let currentStep = navInfo.currentStep {
          ...
          roadNameLabel.text = currentStep.simpleRoadName
          ...
        }
      }
    }
  }

Navigation states

Use navState property of GMSNavigationNavInfo to get the current state of navigation, which is one of the following:

• Enroute - The GMSNavigationNavStateEnroute state means that guided navigation is currently active and the user is on the provided route. Information about the current upcoming maneuver step is available.

• Rerouting - GMSNavigationNavStateRerouting means that navigation is in progress, but the navigator is looking for a new route. The upcoming maneuver step is not available, because there's no new route yet.

• Stopped - GMSNavigationNavStateStopped means navigation has ended. For example, navigation stops when the user exits navigation in the app. In the sample app, a GMSNavigationNavStateStopped state clears the navigation info display to prevent lingering step instructions from being displayed.

Creating icons for maneuvers

The GMSNavigationManeuver enum defines each possible maneuver that could occur while navigating, and you can get the maneuver for a given step from the maneuver property of GMSNavigationStepInfo.

You must create maneuver icons and pair them with their associated maneuvers. For some maneuvers, you can set up a one-to-one mapping to an icon, such as GMSNavigationManeuverDestinationLeft and GMSNavigationManeuverDestinationRight. However, since some maneuvers share characteristics with other meaneuvers, you might want to map more than one maneuver to a single icon. For example GMSNavigationManeuverTurnLeft and GMSNavigationManeuverOnRampLeft could both map to the left turn icon.

Some maneuvers contain an additional “Clockwise” or “CounterClockwise” label, which the SDK determines based on the driving side of a country. For example, in countries where driving is on the left side of the road, drivers take a roundabout or U-turn in a clockwise direction, whereas right-side-of-the-road countries go counterclockwise. The Navigation SDK detects whether a maneuver occurs in left- or right-side traffic and outputs the appropriate maneuver. Therefore, your maneuver icon may be different for a clockwise versus a counterclockwise maneuver.

Expand to see examples icons for different maneuvers

Sample Icon	Turn-By-Turn Maneuvers
	DEPART UNKNOWN
	STRAIGHT ON_RAMP_UNSPECIFIED OFF_RAMP_UNSPECIFIED NAME_CHANGE
	TURN_RIGHT ON_RAMP_RIGHT
	TURN_LEFT ON_RAMP_LEFT
	TURN_SLIGHT_RIGHT ON_RAMP_SLIGHT_RIGHT OFF_RAMP_SLIGHT_RIGHT
	TURN_SLIGHT_LEFT ON_RAMP_SLIGHT_LEFT OFF_RAMP_SLIGHT_LEFT
	TURN_SHARP_RIGHT ON_RAMP_SHARP_RIGHT OFF_RAMP_SHARP_RIGHT
	TURN_SHARP_LEFT ON_RAMP_SHARP_LEFT OFF_RAMP_SHARP_LEFT
	TURN_U_TURN_COUNTERCLOCKWISE ON_RAMP_U_TURN_COUNTERCLOCKWISE OFF_RAMP_U_TURN_COUNTERCLOCKWISE
	TURN_U_TURN_CLOCKWISE ON_RAMP_U_TURN_CLOCKWISE OFF_RAMP_U_TURN_CLOCKWISE
	ROUNDABOUT_SHARP_RIGHT_COUNTERCLOCKWISE
	ROUNDABOUT_SHARP_RIGHT_CLOCKWISE
	ROUNDABOUT_RIGHT_COUNTERCLOCKWISE
	ROUNDABOUT_RIGHT_CLOCKWISE
	ROUNDABOUT_SLIGHT_RIGHT_COUNTERCLOCKWISE
	ROUNDABOUT_SLIGHT_RIGHT_CLOCKWISE
	ROUNDABOUT_STRAIGHT_COUNTERCLOCKWISE
	ROUNDABOUT_STRAIGHT_CLOCKWISE
	ROUNDABOUT_SLIGHT_LEFT_COUNTERCLOCKWISE
	ROUNDABOUT_SLIGHT_LEFT_CLOCKWISE
	ROUNDABOUT_LEFT_COUNTERCLOCKWISE
	ROUNDABOUT_LEFT_CLOCKWISE
	ROUNDABOUT_SHARP_LEFT_COUNTERCLOCKWISE
	ROUNDABOUT_SHARP_LEFT_CLOCKWISE
	ROUNDABOUT_U_TURN_COUNTERCLOCKWISE
	ROUNDABOUT_U_TURN_CLOCKWISE
	ROUNDABOUT_COUNTERCLOCKWISE
	ROUNDABOUT_CLOCKWISE
	ROUNDABOUT_EXIT_COUNTERCLOCKWISE
	ROUNDABOUT_EXIT_CLOCKWISE
	MERGE_RIGHT OFF_RAMP_RIGHT
	MERGE_LEFT OFF_RAMP_LEFT
	FORK_RIGHT TURN_KEEP_RIGHT ON_RAMP_KEEP_RIGHT OFF_RAMP_KEEP_RIGHT
	FORK_LEFT TURN_KEEP_LEFT ON_RAMP_KEEP_LEFT OFF_RAMP_KEEP_LEFT
	MERGE_UNSPECIFIED
	DESTINATION
	DESTINATION_RIGHT
	DESTINATION_LEFT
	FERRY_BOAT
	FERRY_TRAIN