Editor Add-ons build user interfaces (menus, sidebars, and dialogs) using Apps Script's HTML service. Because the interfaces are developed in HTML and CSS, they are highly customizable. However, when building your add-on interface you should design it to provide a great user experience.
The best add-ons extend each editor naturally by using familiar controls and behaviors. When building a new add-on:
- Use the add-ons CSS package in your HTML service pages.
- When in doubt about design, find a similar dialog or sidebar in the editor and match it, or refer to an add-on quickstart.
- Follow this style guide to create a seamless experience.
You must set your add-on's name when you publish it. The name appears in many places, such as the add-on store and within menus.
- Use title case.
- Avoid punctuation, especially parentheses, unless part of your brand.
- Keep it short—30 or fewer characters is best. Long names may be automatically truncated.
- Don’t include the name of the Google product the add-on is for (or use the word Google).
- Leave out version information.
- Make sure the add-on's published name is the same as the filename of the script project. The project name appears in the authorization dialog.
You shouldn’t need to write much. Most actions should be made clear through iconography, layout, and short labels. If you find a portion of your add-on needs more extensive explanation than short labels can provide, it's a best practice to create a separate web page describing your add-on and link to it.
When writing UI text:
- Use sentence case (especially for buttons, labels, and menu items).
- Prefer short, simple text without jargon or acronyms.
Your post-install tip pops up right after someone installs your add-on, and also shows up in Help. You have a couple sentences to help users get started quickly.
- Start with an action word.
- Describe the first step for using your add-on.
- If you have a main UI, such as a sidebar, explain how to open it.
- Don’t promo your add-on here—it’s already installed.
Unlike regular Apps Script projects, add-ons don't appear in the script editor or script manager; users cannot run add-on scripts directly. Instead, every add-on gets a spot in the add-ons menu. The menu (and possibly a dialog or sidebar) let users interact with the add-on.
- The menu is a key part of how users control your add-on, so design its structure and wording carefully.
- Avoid menu items that simply repeat your add-on’s name. Instead, start with an action word.
- If your main menu item begins a workflow and there's no single verb that describes what it does, call it "Start". This pattern is used in the Docs add-on quickstart.
- Unless your menu has more than six items, try not to use sub-menus. They can be finicky and hard to select.
- Describe the task, not the UI component that the menu item displays.
When something goes wrong, it’s important to use plain language. Explain the problem from the user’s standpoint, and suggest how to fix it.
- Don't allow the user to see any exceptions your code throws. Instead, use
try...catchstatements to intercept exceptions, then display a user-friedly error message with inline text styled in the
errorclass from the add-ons CSS package or an alert dialog.
Every add-on's menu includes an automatic Help dialog. If you provide a help URL when you publish, the "Learn more" button links to that page. Unless your add-on is self-explanatory, please provide a page that explains how to use it.
- When possible, show instructions in a bulleted or numbered list. Walk users through to the end result, with clear references to named UI elements.
- Make sure your instructions clearly explain any requirements, like setting up a spreadsheet in a certain way.
- Feel free to link to your help content from your main user interface as well. If your add-on creates a fresh document, you can also display instructions in the body of the document.
Custom user interfaces
Some simple Editor Add-ons can be controlled entirely by their menu, but most display a sidebar or dialog with custom content.
- Sidebars are best for persistent tools that people are likely to use repeatedly while referring to the content of their document or spreadsheet.
- Dialogs are best for single-use tools, settings pages, and important messages.
In any dialog or sidebar, assume people only read the title and button labels. Can they still figure out what your interface does and make a good choice?
- Use a title and button labels that stand on their own.
- Avoid long blocks of descriptive text.
Dialogs are great for tools people use once, then move on. For example, if your add-on lets people insert a graphic, you might display a dialog with choices of what to insert¸ then close the dialog when the graphic is inserted. Dialogs are also helpful for displaying your add-on’s settings, or for communicating an important message.
- Don't open a dialog (including an alert or prompt) from another dialog—only display one at a time.
- For the dialog title, use a word or short phrase, leading with the most important word.
- Button labels should relate to the dialog title.
- Prefer two buttons, usually a primary action and "Cancel". For special cases that require a third button, consider the bottom-right corner.
- Put buttons in the bottom-left corner of the dialog. The blue primary button should be on the left, with any gray secondary buttons to the right.
Sidebars let people refer back to their document, spreadsheet, presentation, or form while making choices. They also let people use your add-on repeatedly. Whenever a new sidebar is opened, any previous sidebar closes automatically. They’re best for temporary modes that the user exits when done.
- Users might have other add-ons with their own sidebars. If two add-ons try to open sidebars simultaneously, only one is shown.
- Don't display a sidebar or dialog when a document first opens.
- Only add-ons operating in
AuthMode.FULLcan open sidebars or dialogs. You can use a menu item to open a sidebar since this prompts the user to provide full authorization.
Great add-on UIs leave their controls some breathing room. Adequate margins and padding go a long way, whereas dense controls can seem overwhelming. When in doubt, borrow a layout from the editor itself. For example, review existing dialogs in Google Docs, such as File > Page setup, when creating your own.
The documentation for the add-ons CSS package provides sample markup for each of the types of controls below.
Use buttons to control your user interface's main actions rather than plain links or other elements.
- Avoid displaying more than one blue, red, or green button at a time. Gray buttons may appear repeatedly.
- Most button labels should be in sentence case and start with a verb. Red buttons, usually for create actions, should use all caps.
Checkboxes and radio buttons
Use checkboxes when people can select multiple options, or no option at all. Use radio buttons (or a select menu) when exactly one option must be selected.
- Don’t change checkboxes' behavior to mimic radio buttons.
- Don’t do anything immediately when they’re checked. People make mistakes. Wait until your users click a button to confirm their choices.
Selects are a great way to offer a short list of alternatives.
- Sort the options alphabetically or by a logical scheme that all users can understand (like days of the week, starting from Sunday).
- If the list grows too long, consider using a different control. For example, you might display a scrollable list to give the menu more space and make it easier to navigate.
If people need to type more than a few words, use a text area.
- Make text areas at least two lines tall so they’re easier to use and don’t look like text fields.
- Place labels on top.
Use text fields if people only need to type a word or two.
- A text field’s width should suggest what you expect people to type in it.
- Avoid using placeholder text as a label, because it disappears on focus. Placeholder text is useful for giving examples or extra detail.
- Place labels on top, but feel free to lay out short text fields side-by-side.
In your add-on
If you’d like to include branding, keep it brief and light. This helps people focus on your UI, and makes your add-on feel like part of the editor.
- All aspects of your add-on must follow the branding guidelines.
- Don’t include the word “Google” or use Google product icons.
- Text should be no more than a few words and styled in the
grayclass from the add-ons CSS package.
- Graphics should be on a white background and no more than 200px × 60px.
- For dialogs, branding should be in the bottom-right corner.
- For sidebars, branding can be at the top or bottom.
In the store
In order to publish an Editor Add-on, you need a number of image assets. These assets are used to construct the add-on store listing.
- All aspects of your store listing must follow the branding guidelines.
- For more details on the images you need to provide, see the image guidelines.
Everyone should be able to enjoy your add-on, whether they see colors differently, use a screen reader, or have other needs. Accessibility is a broad topic that can’t be fully covered in this style guide. One helpful resource is the Google Accessibility site. But here are a few tips to get started:
- Make sure you can navigate to all UI controls with the keyboard. Add
tabindex=0to custom controls (like those made with
<div>) so people can tab to them. Consider if other keys should be supported too, such as arrows for a list.
- Some people may use a screen reader with your add-on. Thus, images should
altattribute, and custom controls should have ARIA attributes to describe their use.
- Don’t rely solely on color to communicate state. Use icons and text too.
If you use standard web controls, like those described earlier in this guide, making your add-on accessible is easier.