This guide shows you how to use the Google Mobile Ads SDK to load and display ads from AppLovin using mediation, covering both waterfall and bidding integrations. It covers how to add AppLovin to an ad unit's mediation configuration, and how to integrate the AppLovin SDK and adapter into an Android app.
Supported integrations and ad formats
The mediation adapter for AppLovin has the following capabilities:
Integration | |
---|---|
Bidding | |
Waterfall | |
Formats | |
Banner | 1 |
Interstitial | |
Rewarded | |
Native |
Banner ads (excluding MREC banners) are supported only in mediation. Bidding does not support any type of banner ads.
Requirements
- Android API level 21 or higher
- [For bidding]: AppLovin adapter 9.4.2.0 or higher (latest version recommended)
Latest Google Mobile Ads SDK
Complete the mediation Get started guide
Step 1: Set up configurations in AppLovin UI
Đăng ký hoặc đăng nhập vào tài khoản AppLovin của bạn.
Để thiết lập đơn vị quảng cáo Ad Manager , bạn sẽ cần có Khoá SDK và Khoá báo cáo của AppLovin. Để tìm các khoá này, hãy chuyển đến Giao diện người dùng AppLovin > Tài khoản > Khoá để xem cả hai giá trị.
Nếu dự định chỉ tích hợp tính năng đặt giá thầu, bạn có thể tiến hành định cấu hình chế độ cài đặt tính năng dàn xếp.
Chọn ứng dụng để dàn xếp
Đặt giá thầu
Bạn không bắt buộc phải thực hiện bước này để tích hợp tính năng đặt giá thầu.
Thác nước
Trên giao diện người dùng AppLovin, hãy chọn Ứng dụng trong mục Kiếm tiền để truy cập vào các ứng dụng bạn đã đăng ký. Chọn ứng dụng mà bạn muốn dùng với tính năng dàn xếp trong danh sách các ứng dụng có sẵn.
Tạo khu vực
Đặt giá thầu
Bạn không bắt buộc phải thực hiện bước này để tích hợp tính năng đặt giá thầu.
Thác nước
Trên giao diện người dùng AppLovin, hãy chọn Khu vực trong phần Kiếm tiền để chuyển đến mã vùng bạn đã đăng ký. Nếu bạn đã tạo các vùng bắt buộc cho ứng dụng, hãy chuyển sang Bước 2. Để tạo mã vùng mới, hãy nhấp vào Tạo vùng.
Nhập tên của Mã khu vực, chọn Android làm Nền tảng rồi chọn Loại quảng cáo.
Định cấu hình giá trị Pricing (Định giá) cho vùng đó bằng cách chọn CPM cố định hoặc Optimized by AppLovin (Tối ưu hoá bởi AppLovin). Bạn có thể định cấu hình CPM trên cơ sở từng quốc gia cho tuỳ chọn CPM cố định. Sau đó, hãy nhấp vào Lưu.
Sau khi tạo vùng, bạn có thể tìm thấy mã vùng trong cột Mã vùng.
Bật chế độ thử nghiệm
Làm theo hướng dẫn trong Chế độ thử nghiệm MAX của AppLovin về cách bật quảng cáo thử nghiệm của AppLovin.
Step 2: Set up AppLovin demand in Ad Manager UI
Đăng nhập vào tài khoản Ad Manager của bạn.
Thêm AppLovin trong Công ty
Đặt giá thầu
Bạn không bắt buộc phải thực hiện bước này để tích hợp tính năng đặt giá thầu.
Thác nước
Chuyển đến mục Quản trị > Công ty, sau đó nhấp vào nút Công ty mới trong thẻ Tất cả công ty. Chọn Mạng quảng cáo.
Chọn AppLovin làm Mạng quảng cáo, nhập một Tên riêng biệt và bật tính năng Dàn xếp. Bật tính năng Thu thập dữ liệu tự động rồi nhập Report Key đã nhận được trong phần trước.
Bạn không cần nhập Tên người dùng hoặc Mật khẩu. Nhấp vào Lưu khi hoàn tất.
Bật tính năng chia sẻ tín hiệu an toàn
Đặt giá thầu
Di chuyển đến mục Quản trị > Cài đặt chung. Chuyển đến thẻ Cài đặt tài khoản Ad Exchange, xem lại và bật tuỳ chọn Chia sẻ tín hiệu an toàn. Nhấp vào Save (Lưu).
Thác nước
Bạn không bắt buộc phải thực hiện bước này để tích hợp kiểu thác nước.
Định cấu hình AppLovin đặt giá thầu
Đặt giá thầu
Chuyển đến phần Phân phối > Bên đặt giá thầu rồi nhấp vào Bên đặt giá thầu mới trong thẻ Đặt giá thầu qua SDK.
Chọn AppLovin làm bên đặt giá thầu.
Bật tuỳ chọn Thêm thư viện tín hiệu của bên đặt giá thầu này vào danh sách các tín hiệu được phép và Cho phép chia sẻ tín hiệu với bên đặt giá thầu này. Sau đó, hãy nhấp vào Tiếp tục.
Nhấp vào Tiếp tục.
Nhấp vào Xong.
Thác nước
Bạn không bắt buộc phải thực hiện bước này để tích hợp kiểu thác nước.
Định cấu hình liên kết đơn vị quảng cáo
Đặt giá thầu
Chuyển đến phần Phân phối > Bên đặt giá thầu rồi chọn công tyAppLovin trong thẻ Đặt giá thầu qua SDK.
Chuyển đến thẻ Liên kết đơn vị quảng cáo, rồi nhấp vào Liên kết đơn vị quảng cáo mới.
Chọn Đơn vị quảng cáo cụ thể. Chọn một đơn vị quảng cáo và định dạng, Ứng dụng dành cho thiết bị di động làm Loại khoảng không quảng cáo và Ứng dụng dành cho thiết bị di động của bạn. Sau đó, hãy nhậpSDK Key đã nhận được ở phần trước. Cuối cùng, hãy nhấp vào Lưu.
Thác nước
Chuyển đến phần Phân phối > Nhóm lợi nhuận rồi nhấp vào nút Nhóm lợi nhuận mới. Chọn Ứng dụng dành cho thiết bị di động.
Di chuyển xuống rồi nhấp vào mục Thêm đối tác lợi nhuận.
Chọn công ty bạn đã tạo cho AppLovin trong phần trước. Chọn Dàn xếp SDK trên thiết bị di động làm Loại tích hợp, Android làm Nền tảng và Đang hoạt động làm Trạng thái.
Nhập Application ID of your app along with the SDK Key and the Zone ID đã nhận được trong phần trước và giá trị CPM mặc định. Nhấp vào Save (Lưu).
Lưu ý: Tính năng thu thập dữ liệu tự động sẽ mất vài ngày để thu thập dữ liệu trước khi có thể tính toán chính xác giá trị CPM động cho mạng dàn xếp. Sau khi có thể tính eCPM, hệ thống sẽ tự động cập nhật giá trị này thay cho bạn.
Add AppLovin Corp. to GDPR and US state regulations ad partners list
Hãy làm theo các bước trong cài đặt GDPR và cài đặt quy định của chính phủ Hoa Kỳ để thêm AppLovin Corp. vào GDPR và danh sách đối tác quảng cáo theo quy định của tiểu bang Hoa Kỳ trong Ad Manager giao diện người dùng.
Step 3: Import the AppLovin SDK and adapter
Android Studio integration (recommended)
In your app-level build.gradle.kts
file, add the following implementation
dependencies and configurations. Use the latest versions of the AppLovin SDK
and adapter:
dependencies {
implementation("com.google.android.gms:play-services-ads:23.3.0")
implementation("com.google.ads.mediation:applovin:12.6.0.0")
}
Manual integration
Download the AppLovin Android SDK, extract the
applovin-sdk-x.y.z.jar
, and add it to your project.Navigate to the AppLovin adapter artifacts on Google's Maven Repository. Select the latest version, download the AppLovin adapter's .aar file, and add it to your project.
Step 4: Implement privacy settings on AppLovin SDK
EU Consent and GDPR
Under the Google EU User Consent Policy, you must ensure that certain disclosures are given to, and consents obtained from, users in the European Economic Area (EEA) regarding the use of device identifiers and personal data. This policy reflects the requirements of the EU ePrivacy Directive and the General Data Protection Regulation (GDPR). When seeking consent, you must identify each ad network in your mediation chain that may collect, receive, or use personal data and provide information about each network's use. Google currently is unable to pass the user's consent choice to such networks automatically.
Since SDK version 12.0.0, AppLovin supports reading the consent string from shared preferences and setting the consent status accordingly.
If you are not using AppLovin SDK version 12.0.0+ or not using a CMP that writes
the consent string into the
shared preferences
, you can use setHasUserContent
and
setIsAgeRestrictedUser
methods. The following sample code shows how to pass
consent information to the AppLovin SDK. These options must be set before you
initialize the Google Mobile Ads SDK
to ensure they get forwarded properly to the AppLovin SDK.
Java
import com.applovin.sdk.AppLovinPrivacySettings;
// ...
AppLovinPrivacySettings.setHasUserConsent(true, context);
Kotlin
import com.applovin.sdk.AppLovinPrivacySettings
// ...
AppLovinPrivacySettings.setHasUserConsent(true, context)
Additionally, if the user is known to be in an age-restricted category, you can
also set the below flag to true
.
Java
AppLovinPrivacySettings.setIsAgeRestrictedUser(true, context);
Kotlin
AppLovinPrivacySettings.setIsAgeRestrictedUser(true, context)
See AppLovin's privacy settings for more information.
US states privacy laws
U.S. states privacy laws require giving users the right to opt out of the "sale" of their "personal information" (as the law defines those terms), with the opt-out offered via a prominent "Do Not Sell My Personal Information" link on the "selling" party's homepage. The U.S. states privacy laws compliance guide offers the ability to enable restricted data processing for Google ad serving, but Google is unable to apply this setting to each ad network in your mediation chain. Therefore, you must identify each ad network in your mediation chain that may participate in the sale of personal information and follow guidance from each of those networks to ensure compliance.
The AppLovin SDK includes the setDoNotSell
method to let publishers opt
out of the sale of personal information.
The following sample code shows how to pass this consent information to the AppLovin SDK. These options must be set before you initialize the Google Mobile Ads SDK to ensure they get forwarded properly to the AppLovin SDK.
Java
import com.applovin.sdk.AppLovinPrivacySettings;
// ...
AppLovinPrivacySettings.setDoNotSell(true, context);
Kotlin
import com.applovin.sdk.AppLovinPrivacySettings
// ...
AppLovinPrivacySettings.setDoNotSell(true, context)
See AppLovin's Privacy documentation for more information.
Step 5: Add required code
No additional code is required for AppLovin integration.
Step 6: Test your implementation
Bật quảng cáo thử nghiệm
Hãy nhớ đăng ký thiết bị thử nghiệm cho Ad Manager và bật chế độ thử nghiệm trong AppLovin giao diện người dùng.
Xác minh quảng cáo thử nghiệm
Để xác minh rằng bạn đang nhận quảng cáo thử nghiệm từ AppLovin, hãy bật thử nghiệm riêng một nguồn quảng cáo trong công cụ kiểm tra quảng cáo bằng cách sử dụng AppLovin (Bidding) and AppLovin (Waterfall) (các) nguồn quảng cáo.
Optional steps
Network-specific parameters
The AppLovin adapter supports setMuteAudio()
which can disable audio on
video ads. This method can be called from an AppLovinExtras.Builder()
object:
Java
Bundle extras = new AppLovinExtras.Builder()
.setMuteAudio(true)
.build();
AdManagerAdRequest request = new AdManagerAdRequest.Builder()
.addNetworkExtrasBundle(ApplovinAdapter.class, extras)
.build();
Kotlin
val extras = AppLovinExtras.Builder()
.setMuteAudio(true)
.build()
val request = AdManagerAdRequest.Builder()
.addNetworkExtrasBundle(ApplovinAdapter::class.java, extras)
.build()
Optimizations
Initializing the AppLovin SDK as soon as your app launches provides AppLovin the ability to track events as soon as the app starts.
Java
AppLovinSdk.getInstance("sdkKey", null, context).initializeSdk();
Kotlin
AppLovinSdk.getInstance("sdkKey", null, context).initializeSdk()
Error codes
If the adapter fails to receive an ad from AppLovin,
publishers can check the underlying error from the ad response using
ResponseInfo.getAdapterResponses()
under the following classes:
com.google.ads.mediation.applovin.ApplovinAdapter
com.google.ads.mediation.applovin.AppLovinMediationAdapter
Here are the codes and accompanying messages thrown by the AppLovin adapter when an ad fails to load:
Error code | Reason |
---|---|
-1009 to -1, 204 | AppLovin SDK returned an error. See AppLovin's documentation for more details. |
101 | The requested ad size does not match an AppLovin supported banner size. |
103 | Context is null. |
104 | AppLovin bid token is empty. |
105 | Requested multiple ads for the same zone. AppLovin can only load 1 ad at a time per zone. |
106 | Ad is not ready to display. |
108 | AppLovin Adapter does not support the ad format being requested. |
AppLovin Android Mediation Adapter Changelog
Version 12.6.0.0
- Verified compatibility with AppLovin SDK 12.6.0.
Built and tested with:
- Google Mobile Ads SDK version 23.2.0.
- AppLovin SDK version 12.6.0.
Version 12.5.0.1
- Added functionality to load a second interstitial or rewarded ad after the previous ad is loaded, if enabled through server parameters.
Built and tested with:
- Google Mobile Ads SDK version 23.1.0.
- AppLovin SDK version 12.5.0.
Version 12.5.0.0
- Updated the minimum required Google Mobile Ads SDK version to 23.1.0.
- Verified compatibility with AppLovin SDK 12.5.0.
Built and tested with:
- Google Mobile Ads SDK version 23.1.0.
- AppLovin SDK version 12.5.0.
Version 12.4.3.0
- Verified compatibility with AppLovin SDK 12.4.3.
Built and tested with:
- Google Mobile Ads SDK version 23.0.0.
- AppLovin SDK version 12.4.3.
Version 12.4.2.0
- Verified compatibility with AppLovin SDK 12.4.2.
Built and tested with:
- Google Mobile Ads SDK version 23.0.0.
- AppLovin SDK version 12.4.2.
Version 12.4.0.0
- Verified compatibility with AppLovin SDK 12.4.0.
Built and tested with:
- Google Mobile Ads SDK version 23.0.0.
- AppLovin SDK version 12.4.0.
Version 12.3.1.0
- Updated the minimum required Google Mobile Ads SDK version to 23.0.0.
- Verified compatibility with AppLovin SDK 12.3.1.
Built and tested with:
- Google Mobile Ads SDK version 23.0.0.
- AppLovin SDK version 12.3.1.
Version 12.3.0.0
- Verified compatibility with AppLovin SDK 12.3.0.
Built and tested with:
- Google Mobile Ads SDK version 22.6.0.
- AppLovin SDK version 12.3.0.
Version 12.2.0.0
- Verified compatibility with AppLovin SDK 12.2.0.
Built and tested with:
- Google Mobile Ads SDK version 22.6.0.
- AppLovin SDK version 12.2.0.
Version 12.1.0.1
- Added the possibility to load interstitial or rewarded ad right after requesting to show them if the server parameters are enabled.
Built and tested with:
- Google Mobile Ads SDK version 22.5.0.
- AppLovin SDK version 12.1.0.
Version 12.1.0.0
- Verified compatibility with AppLovin SDK 12.1.0.
- Fixed an issue that could cause
AppLovinSdkSettings
to be ignored. - Adapter no longer checks for the AppLovin SDK key from the
AndroidManifest.xml
file. - Updated the minimum required Google Mobile Ads SDK version to 22.5.0.
Built and tested with:
- Google Mobile Ads SDK version 22.5.0.
- AppLovin SDK version 12.1.0.
Version 11.11.3.0
- Verified compatibility with AppLovin SDK 11.11.3.
- Updated the minimum required Google Mobile Ads SDK version to 22.3.0.
Built and tested with:
- Google Mobile Ads SDK version 22.3.0.
- AppLovin SDK version 11.11.3.
Version 11.11.2.0
- Verified compatibility with AppLovin SDK 11.11.2.
Built and tested with:
- Google Mobile Ads SDK version 22.2.0.
- AppLovin SDK version 11.11.2.
Version 11.11.1.0
- Verified compatibility with AppLovin SDK 11.11.1.
Built and tested with:
- Google Mobile Ads SDK version 22.2.0.
- AppLovin SDK version 11.11.1.
Version 11.10.1.0
- Verified compatibility with AppLovin SDK 11.10.1.
Built and tested with:
- Google Mobile Ads SDK version 22.1.0.
- AppLovin SDK version 11.10.1.
Version 11.9.0.0
- Verified compatibility with AppLovin SDK 11.9.0.
Built and tested with:
- Google Mobile Ads SDK version 22.0.0.
- AppLovin SDK version 11.9.0.
Version 11.8.2.1
- Updated adapter to use new
VersionInfo
class. - Updated the minimum required Google Mobile Ads SDK version to 22.0.0.
Built and tested with:
- Google Mobile Ads SDK version 22.0.0.
- AppLovin SDK version 11.8.2.
Version 11.8.2.0
- Verified compatibility with AppLovin SDK 11.8.2.
- Added watermark support for bidding ads.
- Added support for MREC size banner ads.
Built and tested with:
- Google Mobile Ads SDK version 21.5.0.
- AppLovin SDK version 11.8.2.
Version 11.7.1.0
- Verified compatibility with AppLovin SDK 11.7.1.
- Updated the minimum required Google Mobile Ads SDK version to 21.5.0.
Built and tested with:
- Google Mobile Ads SDK version 21.5.0.
- AppLovin SDK version 11.7.1.
Version 11.7.0.0
- Verified compatibility with AppLovin SDK 11.7.0.
- Updated the minimum required Google Mobile Ads SDK version to 21.4.0.
Built and tested with:
- Google Mobile Ads SDK version 21.4.0.
- AppLovin SDK version 11.7.0.
Version 11.6.1.0
- Verified compatibility with AppLovin SDK 11.6.1.
- Updated the minimum required Google Mobile Ads SDK version to 21.4.0.
Built and tested with:
- Google Mobile Ads SDK version 21.4.0.
- AppLovin SDK version 11.6.1.
Version 11.6.0.0
- Verified compatibility with AppLovin SDK 11.6.0.
Built and tested with:
- Google Mobile Ads SDK version 21.3.0.
- AppLovin SDK version 11.6.0.
Version 11.5.5.0
- Verified compatibility with AppLovin SDK 11.5.5.
Built and tested with:
- Google Mobile Ads SDK version 21.3.0.
- AppLovin SDK version 11.5.5.
Version 11.5.4.0
- Verified compatibility with AppLovin SDK 11.5.4.
Built and tested with:
- Google Mobile Ads SDK version 21.3.0.
- AppLovin SDK version 11.5.4.
Version 11.5.3.1
- Fixed an issue that can cause
NullPointerException
when loading rewarded ads.
Built and tested with:
- Google Mobile Ads SDK version 21.3.0.
- AppLovin SDK version 11.5.3.
Version 11.5.3.0
- Verified compatibility with AppLovin SDK 11.5.3.
- Updated the minimum required Google Mobile Ads SDK version to 21.3.0.
Built and tested with:
- Google Mobile Ads SDK version 21.3.0.
- AppLovin SDK version 11.5.3.
Version 11.5.2.0
- Fixed an issue where rewarded ad requests continuously fail if the initial rewarded ad request times out.
- Verified compatibility with AppLovin SDK 11.5.2.
Built and tested with:
- Google Mobile Ads SDK version 21.2.0.
- AppLovin SDK version 11.5.2.
Version 11.5.1.0
- Verified compatibility with AppLovin SDK 11.5.1.
Built and tested with:
- Google Mobile Ads SDK version 21.2.0.
- AppLovin SDK version 11.5.1.
Version 11.5.0.0
- Verified compatibility with AppLovin SDK 11.5.0.
Built and tested with:
- Google Mobile Ads SDK version 21.2.0.
- AppLovin SDK version 11.5.0.
Version 11.4.6.0
- Verified compatibility with AppLovin SDK 11.4.6.
- Updated the minimum required Google Mobile Ads SDK version to 21.2.0.
Built and tested with:
- Google Mobile Ads SDK version 21.2.0.
- AppLovin SDK version 11.4.6.
Version 11.4.5.0
- Verified compatibility with AppLovin SDK 11.4.5.
- Updated the minimum required Google Mobile Ads SDK version to 21.1.0.
Built and tested with:
- Google Mobile Ads SDK version 21.1.0.
- AppLovin SDK version 11.4.5.
Version 11.4.4.0
- Verified compatibility with AppLovin SDK 11.4.4.
Built and tested with:
- Google Mobile Ads SDK version 21.0.0.
- AppLovin SDK version 11.4.4.
Version 11.4.3.0
- Verified compatibility with AppLovin SDK 11.4.3.
Built and tested with:
- Google Mobile Ads SDK version 21.0.0.
- AppLovin SDK version 11.4.3.
Version 11.4.2.0
- Verified compatibility with AppLovin SDK 11.4.2.
- Updated the minimum required Google Mobile Ads SDK version to 21.0.0.
- Updated the minimum required Android API level to 19.
Built and tested with:
- Google Mobile Ads SDK version 21.0.0.
- AppLovin SDK version 11.4.2.
Version 11.4.0.0
- Verified compatibility with AppLovin SDK 11.4.0.
- Updated
compileSdkVersion
andtargetSdkVersion
to API 31.
Built and tested with:
- Google Mobile Ads SDK version 20.6.0.
- AppLovin SDK version 11.4.0.
Version 11.3.3.0
- Verified compatibility with AppLovin SDK 11.3.3.
Built and tested with:
- Google Mobile Ads SDK version 20.6.0.
- AppLovin SDK version 11.3.3.
Version 11.3.2.0
- Verified compatibility with AppLovin SDK 11.3.2.
Built and tested with:
- Google Mobile Ads SDK version 20.6.0.
- AppLovin SDK version 11.3.2.
Version 11.3.1.0
- Verified compatibility with AppLovin SDK 11.3.1.
Built and tested with:
- Google Mobile Ads SDK version 20.6.0.
- AppLovin SDK version 11.3.1.
Version 11.3.0.0
- Verified compatibility with AppLovin SDK 11.3.0.
Built and tested with:
- Google Mobile Ads SDK version 20.6.0.
- AppLovin SDK version 11.3.0.
Version 11.2.2.0
- Verified compatibility with AppLovin SDK 11.2.2.
Built and tested with:
- Google Mobile Ads SDK version 20.6.0.
- AppLovin SDK version 11.2.2.
Version 11.2.1.0
- Verified compatibility with AppLovin SDK 11.2.1.
Built and tested with:
- Google Mobile Ads SDK version 20.6.0.
- AppLovin SDK version 11.2.1.
Version 11.1.3.0
- Verified compatibility with AppLovin SDK 11.1.3.
- Updated the minimum required Google Mobile Ads SDK version to 20.6.0.
Built and tested with:
- Google Mobile Ads SDK version 20.6.0.
- AppLovin SDK version 11.1.3.
Version 11.1.2.0
- Verified compatibility with AppLovin SDK 11.1.2.
Built and tested with:
- Google Mobile Ads SDK version 20.5.0.
- AppLovin SDK version 11.1.2.
Version 11.1.0.0
- Verified compatibility with AppLovin SDK 11.1.0.
Built and tested with:
- Google Mobile Ads SDK version 20.5.0.
- AppLovin SDK version 11.1.0.
Version 11.0.0.0
- Verified compatibility with AppLovin SDK 11.0.0.
- Updated the
AppLovinMediationAdapter.getSdkSettings()
method to require aContext
parameter. - Updated the minimum required Google Mobile Ads SDK version to 20.5.0.
Built and tested with:
- Google Mobile Ads SDK version 20.5.0.
- AppLovin SDK version 11.0.0.
Version 10.3.5.0
- Verified compatibility with AppLovin SDK 10.3.5.
Built and tested with:
- Google Mobile Ads SDK version 20.4.0.
- AppLovin SDK version 10.3.5.
Version 10.3.4.0
- Verified compatibility with AppLovin SDK 10.3.4.
- Updated the minimum required Google Mobile Ads SDK version to 20.4.0.
Built and tested with:
- Google Mobile Ads SDK version 20.4.0.
- AppLovin SDK version 10.3.4.
Version 10.3.3.0
- Verified compatibility with AppLovin SDK 10.3.3.
- Updated the minimum required Google Mobile Ads SDK version to 20.3.0.
Built and tested with:
- Google Mobile Ads SDK version 20.3.0.
- AppLovin SDK version 10.3.3.
Version 10.3.2.0
- Verified compatibility with AppLovin SDK 10.3.2.
- Added standardized adapter error codes and messages.
Built and tested with:
- Google Mobile Ads SDK version 20.2.0.
- AppLovin SDK version 10.3.2.
Version 10.3.1.0
- Verified compatibility with AppLovin SDK 10.3.1.
- Updated the minimum required Google Mobile Ads SDK version to 20.2.0.
Built and tested with:
- Google Mobile Ads SDK version 20.2.0.
- AppLovin SDK version 10.3.1.
Version 10.3.0.0
- Verified compatibility with AppLovin SDK 10.3.0.
Built and tested with:
- Google Mobile Ads SDK version 20.1.0.
- AppLovin SDK version 10.3.0.
Version 10.2.1.0
- Verified compatibility with AppLovin SDK 10.2.1.
- The adapter will now attempt to initialize the AppLovin SDK before requesting ads.
Built and tested with:
- Google Mobile Ads SDK version 20.1.0.
- AppLovin SDK version 10.2.1.
Version 10.2.0.0
- Verified compatibility with AppLovin SDK 10.2.0.
Built and tested with:
- Google Mobile Ads SDK version 20.1.0.
- AppLovin SDK version 10.2.0.
Version 10.1.2.0
- Verified compatibility with AppLovin SDK 10.1.2.
- Updated the minimum required Google Mobile Ads SDK version to 20.1.0.
Built and tested with:
- Google Mobile Ads SDK version 20.1.0.
- AppLovin SDK version 10.1.2.
Version 10.0.1.0
- Verified compatibility with AppLovin SDK 10.0.1.
- Updated the minimum required Google Mobile Ads SDK version to 20.0.0.
- Updated AppLovin adapter for new gradle publication settings.
Built and tested with:
- Google Mobile Ads SDK version 20.0.0.
- AppLovin SDK version 10.0.1.
Version 9.15.2.0
- Verified compatibility with AppLovin SDK 9.15.2.
- Updated the minimum required Google Mobile Ads SDK version to 19.7.0.
Built and tested with:
- Google Mobile Ads SDK version 19.7.0.
- AppLovin SDK version 9.15.2.
Version 9.14.12.0
- Verified compatibility with AppLovin SDK 9.14.12.
- Updated the minimum required Google Mobile Ads SDK version to 19.6.0.
Built and tested with:
- Google Mobile Ads SDK version 19.6.0.
- AppLovin SDK version 9.14.12.
Version 9.14.7.0
- Verified compatibility with AppLovin SDK 9.14.7.
- Added the
AppLovinMediationAdapter.getSdkSettings()
method. Publishers may now configure AppLovin SDK settings through these options.
Built and tested with:
- Google Mobile Ads SDK version 19.5.0.
- AppLovin SDK version 9.14.7.
Version 9.14.6.0
- Verified compatibility with AppLovin SDK 9.14.6.
- Updated the minimum required Google Mobile Ads SDK version to 19.5.0.
Built and tested with:
- Google Mobile Ads SDK version 19.5.0.
- AppLovin SDK version 9.14.6.
Version 9.14.5.0
- Verified compatibility with AppLovin SDK 9.14.5.
- Updated the minimum required Google Mobile Ads SDK version to 19.5.0.
Built and tested with:
- Google Mobile Ads SDK version 19.5.0.
- AppLovin SDK version 9.14.5.
Version 9.14.4.0
- Removed support for Native ads and Medium Rectangle banner ads.
- Adapter can now load and request ads using an
Application
context. - Verified compatibility with AppLovin SDK 9.14.4.
Built and tested with:
- Google Mobile Ads SDK version 19.4.0.
- AppLovin SDK version 9.14.4.
Version 9.13.4.0
- Verified compatibility with AppLovin SDK 9.13.4.
- Updated the minimum required Google Mobile Ads SDK version to 19.4.0.
Built and tested with:
- Google Mobile Ads SDK version 19.4.0.
- AppLovin SDK version 9.13.4.
Version 9.13.3.0
- Verified compatibility with AppLovin SDK 9.13.3.
Built and tested with:
- Google Mobile Ads SDK version 19.3.0.
- AppLovin SDK version 9.13.3.
Version 9.13.2.0
- Verified compatibility with AppLovin SDK 9.13.2.
- Updated the minimum required Google Mobile Ads SDK version to 19.3.0.
Built and tested with:
- Google Mobile Ads SDK version 19.3.0.
- AppLovin SDK version 9.13.2.
Version 9.13.1.0
- Verified compatibility with AppLovin SDK 9.13.1.
- Adapter now throws an error if multiple interstitial ads are requested using the same Zone ID.
Built and tested with:
- Google Mobile Ads SDK version 19.2.0.
- AppLovin SDK version 9.13.1.
Version 9.13.0.0
- Updated the adapter to support inline adaptive banner requests.
- Verified compatibility with AppLovin SDK 9.13.0.
- Updated the minimum required Google Mobile Ads SDK version to 19.2.0.
Built and tested with:
- Google Mobile Ads SDK version 19.2.0.
- AppLovin SDK version 9.13.0.
Version 9.12.8.0
- Verified compatibility with AppLovin SDK 9.12.8.
Built and tested with:
- Google Mobile Ads SDK version 19.1.0.
- AppLovin SDK version 9.12.8.
Version 9.12.7.0
- Verified compatibility with AppLovin SDK 9.12.7.
Built and tested with:
- Google Mobile Ads SDK version 19.1.0.
- AppLovin SDK version 9.12.7.
Version 9.12.6.1
- Fixed bug introduced in 9.11.4.1 where bidding banner ads timeout.
Built and tested with:
- Google Mobile Ads SDK version 19.1.0.
- AppLovin SDK version 9.12.6.
Version 9.12.6.0
- Verified compatibility with AppLovin SDK 9.12.6.
Built and tested with:
- Google Mobile Ads SDK version 19.1.0.
- AppLovin SDK version 9.12.6.
Version 9.12.5.0
- Verified compatibility with AppLovin SDK 9.12.5.
Built and tested with:
- Google Mobile Ads SDK version 19.1.0.
- AppLovin SDK version 9.12.5.
Version 9.12.4.0
- Verified compatibility with AppLovin SDK 9.12.4.
- Adapter now requires an
Activity
context to initialize and load ads from AppLovin.
Built and tested with:
- Google Mobile Ads SDK version 19.1.0.
- AppLovin SDK version 9.12.4.
Version 9.12.3.0
- Verified compatibility with AppLovin SDK 9.12.3.
Built and tested with:
- Google Mobile Ads SDK version 19.1.0.
- AppLovin SDK version 9.12.3.
Version 9.12.2.0
- Verified compatibility with AppLovin SDK 9.12.2.
Built and tested with:
- Google Mobile Ads SDK version 19.1.0.
- AppLovin SDK version 9.12.2.
Version 9.12.1.0
- Verified compatibility with AppLovin SDK 9.12.1.
- Updated the minimum required Google Mobile Ads SDK version to 19.1.0.
Built and tested with:
- Google Mobile Ads SDK version 19.1.0.
- AppLovin SDK version 9.12.1.
Version 9.12.0.0
- Verified compatibility with AppLovin SDK 9.12.0.
Built and tested with:
- Google Mobile Ads SDK version 19.0.1.
- AppLovin SDK version 9.12.0.
Version 9.11.4.1
- Fixed an issue that may cause bidding banner/interstitial ad requests to timeout.
- Added descriptive error codes and reasons for adapter load/show failures.
- Updated the minimum required Google Mobile Ads SDK version to 19.0.1.
Built and tested with:
- Google Mobile Ads SDK version 19.0.1.
- AppLovin SDK version 9.11.4.
Version 9.11.4.0
- Verified compatibility with AppLovin SDK 9.11.4.
Built and tested with:
- Google Mobile Ads SDK version 18.3.0.
- AppLovin SDK version 9.11.4.
Version 9.11.2.0
- Verified compatibility with AppLovin SDK 9.11.2.
Built and tested with:
- Google Mobile Ads SDK version 18.3.0.
- AppLovin SDK version 9.11.2.
Version 9.11.1.0
- Verified compatibility with AppLovin SDK 9.11.1.
Built and tested with:
- Google Mobile Ads SDK version 18.3.0.
- AppLovin SDK version 9.11.1.
Version 9.10.5.0
- Verified compatibility with AppLovin SDK 9.10.5.
Built and tested with:
- Google Mobile Ads SDK version 18.3.0.
- AppLovin SDK version 9.10.5.
Version 9.9.1.2
- Removed all references to AppLovin placement ID.
- Updated the minimum required Google Mobile Ads SDK version to 18.3.0.
Built and tested with:
- Google Mobile Ads SDK version 18.3.0.
- AppLovin SDK version 9.9.1.
Version 9.9.1.1
- Native ads now leverage the unified native ads mediation API.
Built and tested with:
- Google Mobile Ads SDK version 18.2.0.
- AppLovin SDK version 9.9.1.
Version 9.9.1.0
- Verified compatibility with AppLovin SDK 9.9.1.
- Updated the minimum required Google Mobile Ads SDK version to 18.2.0.
Version 9.8.0.0
- Verified compatibility with AppLovin SDK 9.8.0.
- Updated the minimum required Google Mobile Ads SDK version to 18.1.1.
Version 9.7.2.0
- Verified compatibility with AppLovin SDK 9.7.2.
- Updated the minimum required Google Mobile Ads SDK version to 18.1.0.
Version 9.4.2.0
- Added bidding capability to the adapter for banner, interstitial and rewarded ads.
- Added support for flexible banner ad sizes.
- Verified compatibility with AppLovin SDK 9.4.2.
Version 9.2.1.1
- Updated adapter to support new open-beta Rewarded API.
- Updated the minimum required Google Mobile Ads SDK version to 17.2.0.
Version 9.2.1.0
- Verified compatibility with AppLovin SDK 9.2.1
Version 9.1.3.0
- Removed support for placements as they were deprecated by AppLovin SDK.
- Verified compatibility with AppLovin SDK 9.1.3
Version 9.1.0.0
- Verified compatibility with AppLovin SDK 9.1.0
Version 8.1.4.0
- Verified compatibility with AppLovin SDK 8.1.4
Version 8.1.3.0
- Verified compatibility with AppLovin SDK 8.1.3
Version 8.1.0.0
- Verified compatibility with AppLovin SDK 8.1.0
Version 8.0.2.1
- Updated the adapter to invoke the
onRewardedVideoComplete()
ad event.
Version 8.0.2.0
- Verified compatibility with AppLovin SDK 8.0.2
Version 8.0.1.1
- Added support for native ads.
- Set AdMob as mediation provider on the AppLovin SDK.
Version 8.0.1.0
- Verified compatibility with AppLovin SDK 8.0.1
Version 8.0.0.0
- Verified compatibility with AppLovin SDK 8.0.0
Version 7.8.6.0
- Verified compatibility with AppLovin SDK 7.8.6
Version 7.8.5.0
- Added support for zones and smart banners.
- Verified compatibility with AppLovin SDK 7.8.5.
Version 7.7.0.0
- Verified compatibility with AppLovin SDK 7.7.0.
Version 7.6.2.0
- Verified compatibility with AppLovin SDK 7.6.2.
Version 7.6.1.0
- Verified compatibility with AppLovin SDK 7.6.1.
Version 7.6.0.0
- Verified compatibility with AppLovin SDK 7.6.0.
Version 7.5.0.0
- Verified compatibility with AppLovin SDK 7.5.0.
Version 7.4.1.1
- Added support for banner ads.
Version 7.4.1.0
- Verified compatibility with AppLovin SDK 7.4.1.
Version 7.3.2.0
- Added support for interstitial ads.
Earlier versions
- Added support for rewarded video ads.