This guide shows you how to use the Google Mobile Ads SDK to load and display ads from AppLovin using mediation, covering both waterfall and bidding integrations. It covers how to add AppLovin to an ad unit's mediation configuration, and how to integrate the AppLovin SDK and adapter into an Android app.
Supported integrations and ad formats
The mediation adapter for AppLovin has the following capabilities:
| Integration | |
|---|---|
| Bidding | |
| Waterfall | |
| Formats | |
| Banner | 1 |
| Interstitial | |
| Rewarded | |
| Native | |
Banner ads (excluding MREC banners) are supported only in mediation. Bidding does not support any type of banner ads.
Requirements
- Android API level 21 or higher
- [For bidding]: AppLovin adapter 9.4.2.0 or higher (latest version recommended)
Latest Google Mobile Ads SDK
Complete the mediation Get started guide
Step 1: Set up configurations in AppLovin UI
AppLovin hesabınıza kaydolun veya giriş yapın.
Reklam biriminizi Ad Manager ayarlamak için AppLovin SDK Anahtarınız ve Rapor Anahtarınız gereklidir. Bunları bulmak için AppLovin kullanıcı arayüzü > Hesap > Anahtarlar'a giderek her iki değeri de görebilirsiniz.
Yalnızca teklifli sistemi entegre etmeyi planlıyorsanız uyumlulaştırma ayarlarınızı yapılandırmaya geçebilirsiniz.
Uyumlulaştırma için uygulama seçin
Teklif
Bu adım, teklif entegrasyonları için gerekli değildir.
Şelale
AppLovin kullanıcı arayüzünde, kayıtlı uygulamalarınıza erişmek için Para Kazanma bölümünden Uygulamalar'ı seçin. Kullanılabilir uygulamalar listesinden uyumlulaştırma ile kullanmak istediğiniz uygulamayı seçin.
Alt bölge oluşturma
Teklif
Bu adım, teklif entegrasyonları için gerekli değildir.
Şelale
AppLovin kullanıcı arayüzünde, kayıtlı alt bölge kimliklerinize ulaşmak için Para Kazanma bölümünden Alt Bölgeler'i seçin. Uygulamanız için gerekli alt bölgeleri zaten oluşturduysanız 2. adıma geçin. Yeni bir alt bölge kimliği oluşturmak için Create Zone'u (Bölge Oluştur) tıklayın.
Zone ID (Bölge Kimliği) adını girin, Platform (Platform) olarak Android'i seçin ve Reklam Türü'nü seçin.
Sabit BGBM veya AppLovin tarafından optimize edildi'yi seçerek alt bölge için Fiyatlandırmayı yapılandırın. BGBM'ler, Sabit BGBM seçeneği için ülke bazında yapılandırılabilir. Ardından Kaydet'i tıklayın.
Alt bölge oluşturulduktan sonra alt bölge kimliği, Zone ID (Bölge Kimliği) sütununun altında bulunabilir.
Test modunu aç
AppLovin'in talimatlarını uygulayın MAX Test Mode AppLovin test reklamlarını etkinleştirme rehberi
Step 2: Set up AppLovin demand in Ad Manager UI
Ad Manager hesabınızda oturum açın.
Şirketlere AppLovin Ekle
Teklif
Bu adım, teklif entegrasyonları için gerekli değildir.
Şelale
Yönetici > Şirketler'e gidin ve ardından Tüm şirketler sekmesinde Yeni şirket düğmesini tıklayın. Reklam ağı'nı seçin.
Reklam ağı olarak AppLovin'i seçin, benzersiz bir Ad girin ve Uyumlulaştırma'yı etkinleştirin. Otomatik veri toplama'yı açın ve önceki bölümde belirtilen Report Key değerini girin.
Kullanıcı adı veya şifre girmenize gerek yoktur. İşlem tamamlandığında Kaydet'i tıklayın.
Güvenli sinyal paylaşımını etkinleştirin
Teklif
Yönetici > Genel ayarlar'a gidin. Ad Exchange hesap ayarları sekmesine gidip Güvenli sinyal paylaşımı'nı inceleyip etkinleştirin. Save'i (Kaydet) tıklayın.
Şelale
Bu adım, şelale entegrasyonları için gerekli değildir.
Teklifli sistemi AppLovin yapılandırın
Teklif
Yayınlama > Teklif Verenler'e gidin ve SDK Teklifi sekmesinin altında Yeni teklif veren'i tıklayın.
Teklif veren olarak AppLovin simgesini seçin.
Bu teklif verenin sinyal kitaplığını izin verilen sinyaller listesine ekle ve Sinyallerin bu teklif verenle paylaşılmasına izin ver seçeneklerini açık duruma getirin. Ardından Devam'ı tıklayın.
Devam'ı tıklayın.
Done'ı (Bitti) tıklayın.
Şelale
Bu adım, şelale entegrasyonları için gerekli değildir.
Reklam birimi eşlemesini yapılandır
Teklif
Yayınlama > Teklif Verenler'e gidin ve SDK Teklif Verme sekmesi altındaAppLovin şirketini seçin.
Reklam birimi eşleme sekmesine gidin ve Yeni reklam birimi eşleme'yi tıklayın.
Belirli reklam birimi'ni seçin. Bir reklam birimi ve biçim seçin, Envanter türü olarak Mobil uygulamayı ve Mobil uygulamanızı seçin. Ardından, bir önceki bölümde aldığınızSDK Key kodunu girin. Son olarak Kaydet'i tıklayın.
Şelale
Yayınlama > Getiri grupları'na gidin ve Yeni getiri grubu düğmesini tıklayın. Mobil uygulamanızı seçin.
Aşağı kaydırın ve Getiri iş ortağı ekle'yi tıklayın.
Önceki bölümde AppLovin şirket için oluşturduğunuzu seçin. Entegrasyon türü olarak Mobil SDK uyumlulaştırması'nı, Platform olarak Android'yi ve Durum olarak Etkin'i seçin.
Önceki bölümde belirtilen Application ID of your app along with the SDK Key and the Zone ID değerini ve Varsayılan BGBM değerini girin. Kaydet'i tıklayın.
Not: Otomatik veri toplama özelliğinin bir uyumlulaştırma ağı için Dinamik BGBM değerini doğru şekilde hesaplayabilmesi için verileri toplaması birkaç gün sürer. eBGBM hesaplandığında sizin adınıza otomatik olarak güncellenir.
Add AppLovin Corp. to GDPR and US state regulations ad partners list
GDPR ayarları ve ABD eyalet yönetmelikleri ayarları bölümündeki adımları uygulayarak Ad Manager kullanıcı arayüzünde GDPR ve ABD eyalet düzenlemeleri reklam iş ortakları listesine AppLovin Corp. ekleyin.
Step 3: Import the AppLovin SDK and adapter
Android Studio integration (recommended)
In your app-level build.gradle.kts file, add the following implementation
dependencies and configurations. Use the latest versions of the AppLovin SDK
and adapter:
dependencies {
implementation("com.google.android.gms:play-services-ads:23.3.0")
implementation("com.google.ads.mediation:applovin:12.6.0.0")
}
Manual integration
Download the AppLovin Android SDK, extract the
applovin-sdk-x.y.z.jar, and add it to your project.Navigate to the AppLovin adapter artifacts on Google's Maven Repository. Select the latest version, download the AppLovin adapter's .aar file, and add it to your project.
Step 4: Implement privacy settings on AppLovin SDK
EU Consent and GDPR
Under the Google EU User Consent Policy, you must ensure that certain disclosures are given to, and consents obtained from, users in the European Economic Area (EEA) regarding the use of device identifiers and personal data. This policy reflects the requirements of the EU ePrivacy Directive and the General Data Protection Regulation (GDPR). When seeking consent, you must identify each ad network in your mediation chain that may collect, receive, or use personal data and provide information about each network's use. Google currently is unable to pass the user's consent choice to such networks automatically.
Since SDK version 12.0.0, AppLovin supports reading the consent string from shared preferences and setting the consent status accordingly.
If you are not using AppLovin SDK version 12.0.0+ or not using a CMP that writes
the consent string into the
shared preferences
, you can use setHasUserContent and
setIsAgeRestrictedUser methods. The following sample code shows how to pass
consent information to the AppLovin SDK. These options must be set before you
initialize the Google Mobile Ads SDK
to ensure they get forwarded properly to the AppLovin SDK.
Java
import com.applovin.sdk.AppLovinPrivacySettings;
// ...
AppLovinPrivacySettings.setHasUserConsent(true, context);
Kotlin
import com.applovin.sdk.AppLovinPrivacySettings
// ...
AppLovinPrivacySettings.setHasUserConsent(true, context)
Additionally, if the user is known to be in an age-restricted category, you can
also set the below flag to true.
Java
AppLovinPrivacySettings.setIsAgeRestrictedUser(true, context);
Kotlin
AppLovinPrivacySettings.setIsAgeRestrictedUser(true, context)
See AppLovin's privacy settings for more information.
US states privacy laws
U.S. states privacy laws require giving users the right to opt out of the "sale" of their "personal information" (as the law defines those terms), with the opt-out offered via a prominent "Do Not Sell My Personal Information" link on the "selling" party's homepage. The U.S. states privacy laws compliance guide offers the ability to enable restricted data processing for Google ad serving, but Google is unable to apply this setting to each ad network in your mediation chain. Therefore, you must identify each ad network in your mediation chain that may participate in the sale of personal information and follow guidance from each of those networks to ensure compliance.
The AppLovin SDK includes the setDoNotSell method to let publishers opt
out of the sale of personal information.
The following sample code shows how to pass this consent information to the AppLovin SDK. These options must be set before you initialize the Google Mobile Ads SDK to ensure they get forwarded properly to the AppLovin SDK.
Java
import com.applovin.sdk.AppLovinPrivacySettings;
// ...
AppLovinPrivacySettings.setDoNotSell(true, context);
Kotlin
import com.applovin.sdk.AppLovinPrivacySettings
// ...
AppLovinPrivacySettings.setDoNotSell(true, context)
See AppLovin's Privacy documentation for more information.
Step 5: Add required code
No additional code is required for AppLovin integration.
Step 6: Test your implementation
Test reklamlarını etkinleştir
Ad Manager için test cihazınızı kaydettiğinizden ve AppLovin kullanıcı arayüzünde test modunu etkinleştirdiğinizden emin olun.
Test reklamlarını doğrulama
AppLovinreklam kaynağından test reklamları aldığınızı doğrulamak için AppLovin (Bidding) and AppLovin (Waterfall) reklam kaynaklarını kullanarak reklam inceleyicide tek reklam kaynağı testini etkinleştirin.
Optional steps
Network-specific parameters
The AppLovin adapter supports setMuteAudio() which can disable audio on
video ads. This method can be called from an AppLovinExtras.Builder() object:
Java
Bundle extras = new AppLovinExtras.Builder()
.setMuteAudio(true)
.build();
AdManagerAdRequest request = new AdManagerAdRequest.Builder()
.addNetworkExtrasBundle(ApplovinAdapter.class, extras)
.build();
Kotlin
val extras = AppLovinExtras.Builder()
.setMuteAudio(true)
.build()
val request = AdManagerAdRequest.Builder()
.addNetworkExtrasBundle(ApplovinAdapter::class.java, extras)
.build()
Optimizations
Initializing the AppLovin SDK as soon as your app launches provides AppLovin the ability to track events as soon as the app starts.
Java
AppLovinSdk.getInstance("sdkKey", null, context).initializeSdk();
Kotlin
AppLovinSdk.getInstance("sdkKey", null, context).initializeSdk()
Error codes
If the adapter fails to receive an ad from AppLovin,
publishers can check the underlying error from the ad response using
ResponseInfo.getAdapterResponses()
under the following classes:
com.google.ads.mediation.applovin.ApplovinAdapter
com.google.ads.mediation.applovin.AppLovinMediationAdapter
Here are the codes and accompanying messages thrown by the AppLovin adapter when an ad fails to load:
| Error code | Reason |
|---|---|
| -1009 to -1, 204 | AppLovin SDK returned an error. See AppLovin's documentation for more details. |
| 101 | The requested ad size does not match an AppLovin supported banner size. |
| 103 | Context is null. |
| 104 | AppLovin bid token is empty. |
| 105 | Requested multiple ads for the same zone. AppLovin can only load 1 ad at a time per zone. |
| 106 | Ad is not ready to display. |
| 108 | AppLovin Adapter does not support the ad format being requested. |
AppLovin Android Mediation Adapter Changelog
Version 12.6.0.0
- Verified compatibility with AppLovin SDK 12.6.0.
Built and tested with:
- Google Mobile Ads SDK version 23.2.0.
- AppLovin SDK version 12.6.0.
Version 12.5.0.1
- Added functionality to load a second interstitial or rewarded ad after the previous ad is loaded, if enabled through server parameters.
Built and tested with:
- Google Mobile Ads SDK version 23.1.0.
- AppLovin SDK version 12.5.0.
Version 12.5.0.0
- Updated the minimum required Google Mobile Ads SDK version to 23.1.0.
- Verified compatibility with AppLovin SDK 12.5.0.
Built and tested with:
- Google Mobile Ads SDK version 23.1.0.
- AppLovin SDK version 12.5.0.
Version 12.4.3.0
- Verified compatibility with AppLovin SDK 12.4.3.
Built and tested with:
- Google Mobile Ads SDK version 23.0.0.
- AppLovin SDK version 12.4.3.
Version 12.4.2.0
- Verified compatibility with AppLovin SDK 12.4.2.
Built and tested with:
- Google Mobile Ads SDK version 23.0.0.
- AppLovin SDK version 12.4.2.
Version 12.4.0.0
- Verified compatibility with AppLovin SDK 12.4.0.
Built and tested with:
- Google Mobile Ads SDK version 23.0.0.
- AppLovin SDK version 12.4.0.
Version 12.3.1.0
- Updated the minimum required Google Mobile Ads SDK version to 23.0.0.
- Verified compatibility with AppLovin SDK 12.3.1.
Built and tested with:
- Google Mobile Ads SDK version 23.0.0.
- AppLovin SDK version 12.3.1.
Version 12.3.0.0
- Verified compatibility with AppLovin SDK 12.3.0.
Built and tested with:
- Google Mobile Ads SDK version 22.6.0.
- AppLovin SDK version 12.3.0.
Version 12.2.0.0
- Verified compatibility with AppLovin SDK 12.2.0.
Built and tested with:
- Google Mobile Ads SDK version 22.6.0.
- AppLovin SDK version 12.2.0.
Version 12.1.0.1
- Added the possibility to load interstitial or rewarded ad right after requesting to show them if the server parameters are enabled.
Built and tested with:
- Google Mobile Ads SDK version 22.5.0.
- AppLovin SDK version 12.1.0.
Version 12.1.0.0
- Verified compatibility with AppLovin SDK 12.1.0.
- Fixed an issue that could cause
AppLovinSdkSettingsto be ignored. - Adapter no longer checks for the AppLovin SDK key from the
AndroidManifest.xmlfile. - Updated the minimum required Google Mobile Ads SDK version to 22.5.0.
Built and tested with:
- Google Mobile Ads SDK version 22.5.0.
- AppLovin SDK version 12.1.0.
Version 11.11.3.0
- Verified compatibility with AppLovin SDK 11.11.3.
- Updated the minimum required Google Mobile Ads SDK version to 22.3.0.
Built and tested with:
- Google Mobile Ads SDK version 22.3.0.
- AppLovin SDK version 11.11.3.
Version 11.11.2.0
- Verified compatibility with AppLovin SDK 11.11.2.
Built and tested with:
- Google Mobile Ads SDK version 22.2.0.
- AppLovin SDK version 11.11.2.
Version 11.11.1.0
- Verified compatibility with AppLovin SDK 11.11.1.
Built and tested with:
- Google Mobile Ads SDK version 22.2.0.
- AppLovin SDK version 11.11.1.
Version 11.10.1.0
- Verified compatibility with AppLovin SDK 11.10.1.
Built and tested with:
- Google Mobile Ads SDK version 22.1.0.
- AppLovin SDK version 11.10.1.
Version 11.9.0.0
- Verified compatibility with AppLovin SDK 11.9.0.
Built and tested with:
- Google Mobile Ads SDK version 22.0.0.
- AppLovin SDK version 11.9.0.
Version 11.8.2.1
- Updated adapter to use new
VersionInfoclass. - Updated the minimum required Google Mobile Ads SDK version to 22.0.0.
Built and tested with:
- Google Mobile Ads SDK version 22.0.0.
- AppLovin SDK version 11.8.2.
Version 11.8.2.0
- Verified compatibility with AppLovin SDK 11.8.2.
- Added watermark support for bidding ads.
- Added support for MREC size banner ads.
Built and tested with:
- Google Mobile Ads SDK version 21.5.0.
- AppLovin SDK version 11.8.2.
Version 11.7.1.0
- Verified compatibility with AppLovin SDK 11.7.1.
- Updated the minimum required Google Mobile Ads SDK version to 21.5.0.
Built and tested with:
- Google Mobile Ads SDK version 21.5.0.
- AppLovin SDK version 11.7.1.
Version 11.7.0.0
- Verified compatibility with AppLovin SDK 11.7.0.
- Updated the minimum required Google Mobile Ads SDK version to 21.4.0.
Built and tested with:
- Google Mobile Ads SDK version 21.4.0.
- AppLovin SDK version 11.7.0.
Version 11.6.1.0
- Verified compatibility with AppLovin SDK 11.6.1.
- Updated the minimum required Google Mobile Ads SDK version to 21.4.0.
Built and tested with:
- Google Mobile Ads SDK version 21.4.0.
- AppLovin SDK version 11.6.1.
Version 11.6.0.0
- Verified compatibility with AppLovin SDK 11.6.0.
Built and tested with:
- Google Mobile Ads SDK version 21.3.0.
- AppLovin SDK version 11.6.0.
Version 11.5.5.0
- Verified compatibility with AppLovin SDK 11.5.5.
Built and tested with:
- Google Mobile Ads SDK version 21.3.0.
- AppLovin SDK version 11.5.5.
Version 11.5.4.0
- Verified compatibility with AppLovin SDK 11.5.4.
Built and tested with:
- Google Mobile Ads SDK version 21.3.0.
- AppLovin SDK version 11.5.4.
Version 11.5.3.1
- Fixed an issue that can cause
NullPointerExceptionwhen loading rewarded ads.
Built and tested with:
- Google Mobile Ads SDK version 21.3.0.
- AppLovin SDK version 11.5.3.
Version 11.5.3.0
- Verified compatibility with AppLovin SDK 11.5.3.
- Updated the minimum required Google Mobile Ads SDK version to 21.3.0.
Built and tested with:
- Google Mobile Ads SDK version 21.3.0.
- AppLovin SDK version 11.5.3.
Version 11.5.2.0
- Fixed an issue where rewarded ad requests continuously fail if the initial rewarded ad request times out.
- Verified compatibility with AppLovin SDK 11.5.2.
Built and tested with:
- Google Mobile Ads SDK version 21.2.0.
- AppLovin SDK version 11.5.2.
Version 11.5.1.0
- Verified compatibility with AppLovin SDK 11.5.1.
Built and tested with:
- Google Mobile Ads SDK version 21.2.0.
- AppLovin SDK version 11.5.1.
Version 11.5.0.0
- Verified compatibility with AppLovin SDK 11.5.0.
Built and tested with:
- Google Mobile Ads SDK version 21.2.0.
- AppLovin SDK version 11.5.0.
Version 11.4.6.0
- Verified compatibility with AppLovin SDK 11.4.6.
- Updated the minimum required Google Mobile Ads SDK version to 21.2.0.
Built and tested with:
- Google Mobile Ads SDK version 21.2.0.
- AppLovin SDK version 11.4.6.
Version 11.4.5.0
- Verified compatibility with AppLovin SDK 11.4.5.
- Updated the minimum required Google Mobile Ads SDK version to 21.1.0.
Built and tested with:
- Google Mobile Ads SDK version 21.1.0.
- AppLovin SDK version 11.4.5.
Version 11.4.4.0
- Verified compatibility with AppLovin SDK 11.4.4.
Built and tested with:
- Google Mobile Ads SDK version 21.0.0.
- AppLovin SDK version 11.4.4.
Version 11.4.3.0
- Verified compatibility with AppLovin SDK 11.4.3.
Built and tested with:
- Google Mobile Ads SDK version 21.0.0.
- AppLovin SDK version 11.4.3.
Version 11.4.2.0
- Verified compatibility with AppLovin SDK 11.4.2.
- Updated the minimum required Google Mobile Ads SDK version to 21.0.0.
- Updated the minimum required Android API level to 19.
Built and tested with:
- Google Mobile Ads SDK version 21.0.0.
- AppLovin SDK version 11.4.2.
Version 11.4.0.0
- Verified compatibility with AppLovin SDK 11.4.0.
- Updated
compileSdkVersionandtargetSdkVersionto API 31.
Built and tested with:
- Google Mobile Ads SDK version 20.6.0.
- AppLovin SDK version 11.4.0.
Version 11.3.3.0
- Verified compatibility with AppLovin SDK 11.3.3.
Built and tested with:
- Google Mobile Ads SDK version 20.6.0.
- AppLovin SDK version 11.3.3.
Version 11.3.2.0
- Verified compatibility with AppLovin SDK 11.3.2.
Built and tested with:
- Google Mobile Ads SDK version 20.6.0.
- AppLovin SDK version 11.3.2.
Version 11.3.1.0
- Verified compatibility with AppLovin SDK 11.3.1.
Built and tested with:
- Google Mobile Ads SDK version 20.6.0.
- AppLovin SDK version 11.3.1.
Version 11.3.0.0
- Verified compatibility with AppLovin SDK 11.3.0.
Built and tested with:
- Google Mobile Ads SDK version 20.6.0.
- AppLovin SDK version 11.3.0.
Version 11.2.2.0
- Verified compatibility with AppLovin SDK 11.2.2.
Built and tested with:
- Google Mobile Ads SDK version 20.6.0.
- AppLovin SDK version 11.2.2.
Version 11.2.1.0
- Verified compatibility with AppLovin SDK 11.2.1.
Built and tested with:
- Google Mobile Ads SDK version 20.6.0.
- AppLovin SDK version 11.2.1.
Version 11.1.3.0
- Verified compatibility with AppLovin SDK 11.1.3.
- Updated the minimum required Google Mobile Ads SDK version to 20.6.0.
Built and tested with:
- Google Mobile Ads SDK version 20.6.0.
- AppLovin SDK version 11.1.3.
Version 11.1.2.0
- Verified compatibility with AppLovin SDK 11.1.2.
Built and tested with:
- Google Mobile Ads SDK version 20.5.0.
- AppLovin SDK version 11.1.2.
Version 11.1.0.0
- Verified compatibility with AppLovin SDK 11.1.0.
Built and tested with:
- Google Mobile Ads SDK version 20.5.0.
- AppLovin SDK version 11.1.0.
Version 11.0.0.0
- Verified compatibility with AppLovin SDK 11.0.0.
- Updated the
AppLovinMediationAdapter.getSdkSettings()method to require aContextparameter. - Updated the minimum required Google Mobile Ads SDK version to 20.5.0.
Built and tested with:
- Google Mobile Ads SDK version 20.5.0.
- AppLovin SDK version 11.0.0.
Version 10.3.5.0
- Verified compatibility with AppLovin SDK 10.3.5.
Built and tested with:
- Google Mobile Ads SDK version 20.4.0.
- AppLovin SDK version 10.3.5.
Version 10.3.4.0
- Verified compatibility with AppLovin SDK 10.3.4.
- Updated the minimum required Google Mobile Ads SDK version to 20.4.0.
Built and tested with:
- Google Mobile Ads SDK version 20.4.0.
- AppLovin SDK version 10.3.4.
Version 10.3.3.0
- Verified compatibility with AppLovin SDK 10.3.3.
- Updated the minimum required Google Mobile Ads SDK version to 20.3.0.
Built and tested with:
- Google Mobile Ads SDK version 20.3.0.
- AppLovin SDK version 10.3.3.
Version 10.3.2.0
- Verified compatibility with AppLovin SDK 10.3.2.
- Added standardized adapter error codes and messages.
Built and tested with:
- Google Mobile Ads SDK version 20.2.0.
- AppLovin SDK version 10.3.2.
Version 10.3.1.0
- Verified compatibility with AppLovin SDK 10.3.1.
- Updated the minimum required Google Mobile Ads SDK version to 20.2.0.
Built and tested with:
- Google Mobile Ads SDK version 20.2.0.
- AppLovin SDK version 10.3.1.
Version 10.3.0.0
- Verified compatibility with AppLovin SDK 10.3.0.
Built and tested with:
- Google Mobile Ads SDK version 20.1.0.
- AppLovin SDK version 10.3.0.
Version 10.2.1.0
- Verified compatibility with AppLovin SDK 10.2.1.
- The adapter will now attempt to initialize the AppLovin SDK before requesting ads.
Built and tested with:
- Google Mobile Ads SDK version 20.1.0.
- AppLovin SDK version 10.2.1.
Version 10.2.0.0
- Verified compatibility with AppLovin SDK 10.2.0.
Built and tested with:
- Google Mobile Ads SDK version 20.1.0.
- AppLovin SDK version 10.2.0.
Version 10.1.2.0
- Verified compatibility with AppLovin SDK 10.1.2.
- Updated the minimum required Google Mobile Ads SDK version to 20.1.0.
Built and tested with:
- Google Mobile Ads SDK version 20.1.0.
- AppLovin SDK version 10.1.2.
Version 10.0.1.0
- Verified compatibility with AppLovin SDK 10.0.1.
- Updated the minimum required Google Mobile Ads SDK version to 20.0.0.
- Updated AppLovin adapter for new gradle publication settings.
Built and tested with:
- Google Mobile Ads SDK version 20.0.0.
- AppLovin SDK version 10.0.1.
Version 9.15.2.0
- Verified compatibility with AppLovin SDK 9.15.2.
- Updated the minimum required Google Mobile Ads SDK version to 19.7.0.
Built and tested with:
- Google Mobile Ads SDK version 19.7.0.
- AppLovin SDK version 9.15.2.
Version 9.14.12.0
- Verified compatibility with AppLovin SDK 9.14.12.
- Updated the minimum required Google Mobile Ads SDK version to 19.6.0.
Built and tested with:
- Google Mobile Ads SDK version 19.6.0.
- AppLovin SDK version 9.14.12.
Version 9.14.7.0
- Verified compatibility with AppLovin SDK 9.14.7.
- Added the
AppLovinMediationAdapter.getSdkSettings()method. Publishers may now configure AppLovin SDK settings through these options.
Built and tested with:
- Google Mobile Ads SDK version 19.5.0.
- AppLovin SDK version 9.14.7.
Version 9.14.6.0
- Verified compatibility with AppLovin SDK 9.14.6.
- Updated the minimum required Google Mobile Ads SDK version to 19.5.0.
Built and tested with:
- Google Mobile Ads SDK version 19.5.0.
- AppLovin SDK version 9.14.6.
Version 9.14.5.0
- Verified compatibility with AppLovin SDK 9.14.5.
- Updated the minimum required Google Mobile Ads SDK version to 19.5.0.
Built and tested with:
- Google Mobile Ads SDK version 19.5.0.
- AppLovin SDK version 9.14.5.
Version 9.14.4.0
- Removed support for Native ads and Medium Rectangle banner ads.
- Adapter can now load and request ads using an
Applicationcontext. - Verified compatibility with AppLovin SDK 9.14.4.
Built and tested with:
- Google Mobile Ads SDK version 19.4.0.
- AppLovin SDK version 9.14.4.
Version 9.13.4.0
- Verified compatibility with AppLovin SDK 9.13.4.
- Updated the minimum required Google Mobile Ads SDK version to 19.4.0.
Built and tested with:
- Google Mobile Ads SDK version 19.4.0.
- AppLovin SDK version 9.13.4.
Version 9.13.3.0
- Verified compatibility with AppLovin SDK 9.13.3.
Built and tested with:
- Google Mobile Ads SDK version 19.3.0.
- AppLovin SDK version 9.13.3.
Version 9.13.2.0
- Verified compatibility with AppLovin SDK 9.13.2.
- Updated the minimum required Google Mobile Ads SDK version to 19.3.0.
Built and tested with:
- Google Mobile Ads SDK version 19.3.0.
- AppLovin SDK version 9.13.2.
Version 9.13.1.0
- Verified compatibility with AppLovin SDK 9.13.1.
- Adapter now throws an error if multiple interstitial ads are requested using the same Zone ID.
Built and tested with:
- Google Mobile Ads SDK version 19.2.0.
- AppLovin SDK version 9.13.1.
Version 9.13.0.0
- Updated the adapter to support inline adaptive banner requests.
- Verified compatibility with AppLovin SDK 9.13.0.
- Updated the minimum required Google Mobile Ads SDK version to 19.2.0.
Built and tested with:
- Google Mobile Ads SDK version 19.2.0.
- AppLovin SDK version 9.13.0.
Version 9.12.8.0
- Verified compatibility with AppLovin SDK 9.12.8.
Built and tested with:
- Google Mobile Ads SDK version 19.1.0.
- AppLovin SDK version 9.12.8.
Version 9.12.7.0
- Verified compatibility with AppLovin SDK 9.12.7.
Built and tested with:
- Google Mobile Ads SDK version 19.1.0.
- AppLovin SDK version 9.12.7.
Version 9.12.6.1
- Fixed bug introduced in 9.11.4.1 where bidding banner ads timeout.
Built and tested with:
- Google Mobile Ads SDK version 19.1.0.
- AppLovin SDK version 9.12.6.
Version 9.12.6.0
- Verified compatibility with AppLovin SDK 9.12.6.
Built and tested with:
- Google Mobile Ads SDK version 19.1.0.
- AppLovin SDK version 9.12.6.
Version 9.12.5.0
- Verified compatibility with AppLovin SDK 9.12.5.
Built and tested with:
- Google Mobile Ads SDK version 19.1.0.
- AppLovin SDK version 9.12.5.
Version 9.12.4.0
- Verified compatibility with AppLovin SDK 9.12.4.
- Adapter now requires an
Activitycontext to initialize and load ads from AppLovin.
Built and tested with:
- Google Mobile Ads SDK version 19.1.0.
- AppLovin SDK version 9.12.4.
Version 9.12.3.0
- Verified compatibility with AppLovin SDK 9.12.3.
Built and tested with:
- Google Mobile Ads SDK version 19.1.0.
- AppLovin SDK version 9.12.3.
Version 9.12.2.0
- Verified compatibility with AppLovin SDK 9.12.2.
Built and tested with:
- Google Mobile Ads SDK version 19.1.0.
- AppLovin SDK version 9.12.2.
Version 9.12.1.0
- Verified compatibility with AppLovin SDK 9.12.1.
- Updated the minimum required Google Mobile Ads SDK version to 19.1.0.
Built and tested with:
- Google Mobile Ads SDK version 19.1.0.
- AppLovin SDK version 9.12.1.
Version 9.12.0.0
- Verified compatibility with AppLovin SDK 9.12.0.
Built and tested with:
- Google Mobile Ads SDK version 19.0.1.
- AppLovin SDK version 9.12.0.
Version 9.11.4.1
- Fixed an issue that may cause bidding banner/interstitial ad requests to timeout.
- Added descriptive error codes and reasons for adapter load/show failures.
- Updated the minimum required Google Mobile Ads SDK version to 19.0.1.
Built and tested with:
- Google Mobile Ads SDK version 19.0.1.
- AppLovin SDK version 9.11.4.
Version 9.11.4.0
- Verified compatibility with AppLovin SDK 9.11.4.
Built and tested with:
- Google Mobile Ads SDK version 18.3.0.
- AppLovin SDK version 9.11.4.
Version 9.11.2.0
- Verified compatibility with AppLovin SDK 9.11.2.
Built and tested with:
- Google Mobile Ads SDK version 18.3.0.
- AppLovin SDK version 9.11.2.
Version 9.11.1.0
- Verified compatibility with AppLovin SDK 9.11.1.
Built and tested with:
- Google Mobile Ads SDK version 18.3.0.
- AppLovin SDK version 9.11.1.
Version 9.10.5.0
- Verified compatibility with AppLovin SDK 9.10.5.
Built and tested with:
- Google Mobile Ads SDK version 18.3.0.
- AppLovin SDK version 9.10.5.
Version 9.9.1.2
- Removed all references to AppLovin placement ID.
- Updated the minimum required Google Mobile Ads SDK version to 18.3.0.
Built and tested with:
- Google Mobile Ads SDK version 18.3.0.
- AppLovin SDK version 9.9.1.
Version 9.9.1.1
- Native ads now leverage the unified native ads mediation API.
Built and tested with:
- Google Mobile Ads SDK version 18.2.0.
- AppLovin SDK version 9.9.1.
Version 9.9.1.0
- Verified compatibility with AppLovin SDK 9.9.1.
- Updated the minimum required Google Mobile Ads SDK version to 18.2.0.
Version 9.8.0.0
- Verified compatibility with AppLovin SDK 9.8.0.
- Updated the minimum required Google Mobile Ads SDK version to 18.1.1.
Version 9.7.2.0
- Verified compatibility with AppLovin SDK 9.7.2.
- Updated the minimum required Google Mobile Ads SDK version to 18.1.0.
Version 9.4.2.0
- Added bidding capability to the adapter for banner, interstitial and rewarded ads.
- Added support for flexible banner ad sizes.
- Verified compatibility with AppLovin SDK 9.4.2.
Version 9.2.1.1
- Updated adapter to support new open-beta Rewarded API.
- Updated the minimum required Google Mobile Ads SDK version to 17.2.0.
Version 9.2.1.0
- Verified compatibility with AppLovin SDK 9.2.1
Version 9.1.3.0
- Removed support for placements as they were deprecated by AppLovin SDK.
- Verified compatibility with AppLovin SDK 9.1.3
Version 9.1.0.0
- Verified compatibility with AppLovin SDK 9.1.0
Version 8.1.4.0
- Verified compatibility with AppLovin SDK 8.1.4
Version 8.1.3.0
- Verified compatibility with AppLovin SDK 8.1.3
Version 8.1.0.0
- Verified compatibility with AppLovin SDK 8.1.0
Version 8.0.2.1
- Updated the adapter to invoke the
onRewardedVideoComplete()ad event.
Version 8.0.2.0
- Verified compatibility with AppLovin SDK 8.0.2
Version 8.0.1.1
- Added support for native ads.
- Set AdMob as mediation provider on the AppLovin SDK.
Version 8.0.1.0
- Verified compatibility with AppLovin SDK 8.0.1
Version 8.0.0.0
- Verified compatibility with AppLovin SDK 8.0.0
Version 7.8.6.0
- Verified compatibility with AppLovin SDK 7.8.6
Version 7.8.5.0
- Added support for zones and smart banners.
- Verified compatibility with AppLovin SDK 7.8.5.
Version 7.7.0.0
- Verified compatibility with AppLovin SDK 7.7.0.
Version 7.6.2.0
- Verified compatibility with AppLovin SDK 7.6.2.
Version 7.6.1.0
- Verified compatibility with AppLovin SDK 7.6.1.
Version 7.6.0.0
- Verified compatibility with AppLovin SDK 7.6.0.
Version 7.5.0.0
- Verified compatibility with AppLovin SDK 7.5.0.
Version 7.4.1.1
- Added support for banner ads.
Version 7.4.1.0
- Verified compatibility with AppLovin SDK 7.4.1.
Version 7.3.2.0
- Added support for interstitial ads.
Earlier versions
- Added support for rewarded video ads.