This guide shows you how to use the Google Mobile Ads SDK to load and display ads from AppLovin using mediation, covering both waterfall and bidding integrations. It covers how to add AppLovin to an ad unit's mediation configuration, and how to integrate the AppLovin SDK and adapter into an Android app.
Supported integrations and ad formats
The mediation adapter for AppLovin has the following capabilities:
Integration | |
---|---|
Bidding | |
Waterfall | |
Formats | |
Banner | 1 |
Interstitial | |
Rewarded | |
Native |
Banner ads (excluding MREC banners) are supported only in mediation. Bidding does not support any type of banner ads.
Requirements
- Android API level 21 or higher
- [For bidding]: AppLovin adapter 9.4.2.0 or higher (latest version recommended)
Latest Google Mobile Ads SDK
Complete the mediation Get started guide
Step 1: Set up configurations in AppLovin UI
Sign up or log in to your AppLovin account.
To set up your AdMob ad unit, you'll need your AppLovin SDK Key and Report Key. To find them, go to the AppLovin UI > Account > Keys to see both values.
If you plan on just integrating bidding, you can proceed to configure your mediation settings.
Select app for mediation
Bidding
This step isn't required for bidding integrations.
Waterfall
On the AppLovin UI, select Applications under the Monetization section to get to your registered apps. Select the app you'd like to use with mediation from the list of available apps.
Create a zone
Bidding
This step isn't required for bidding integrations.
Waterfall
On the AppLovin UI, select Zones under the Monetization section to get to your registered zone IDs. If you have already created the required zones for your app, skip ahead to Step 2. To create a new zone ID, click Create Zone.
Enter the name of Zone ID, select Android as the Platform, and choose the Ad Type.
Configure Pricing for the zone by selecting either Flat CPM or Optimized by AppLovin. CPMs can be configured on a per country basis for the Flat CPM option. Then, click Save.
Android
iOS
Once the zone is created, the zone ID can be found under the Zone ID column.
Android
iOS
Turn on test mode
Follow the instructions in AppLovin's MAX Test Mode guide on how to enable AppLovin test ads.
Step 2: Set up AppLovin demand in Ad Manager UI
سجِّل الدخول إلى حسابك على "مدير الإعلانات".
إضافة AppLovin في الشركات
عروض الأسعار
هذه الخطوة غير مطلوبة لعمليات دمج عروض الأسعار.
شلال
انتقِل إلى المشرف > الشركات، ثم انقر على الزر شركة جديدة في علامة التبويب جميع الشركات. اختَر شبكة الإعلانات.
اختَر AppLovin باعتبارها شبكة الإعلانات، وأدخِل اسمًا فريدًا وفعِّل التوسّط. فعِّل خيار الجمع التلقائي للبيانات، وأدخِل Report Key الذي تم الحصول عليه في القسم السابق.
لست بحاجة إلى إدخال اسم مستخدم أو كلمة مرور. انقر على حفظ عند الانتهاء.
تفعيل ميزة مشاركة الإشارات الآمنة
عروض الأسعار
انتقِل إلى المشرف > الإعدادات العامة. انتقِل إلى علامة التبويب إعدادات حساب Ad Exchange وراجِع خيار مشاركة الإشارات الآمنة وفعِّله. النقر على حفظ
شلال
هذه الخطوة غير مطلوبة لعمليات دمج العرض الإعلاني بدون انقطاع.
ضبط AppLovin عروض الأسعار
عروض الأسعار
انتقِل إلى عرض الإعلانات > مقدِّمو عروض الأسعار، وانقر على مقدِّم عروض أسعار جديد ضمن علامة التبويب عروض الأسعار باستخدام حِزم تطوير البرامج (SDK).
اختَر AppLovin كمقدِّم عروض الأسعار.
فعِّل الخيار إضافة مكتبة إشارات مقدِّم عرض السعر هذا إلى قائمة الإشارات المسموح بها والسماح بمشاركة الإشارات مع مقدِّم عرض السعر هذا. بعد ذلك، انقر على متابعة.
انقر على متابعة.
انقر على تم.
شلال
هذه الخطوة غير مطلوبة لعمليات دمج العرض الإعلاني بدون انقطاع.
إعداد ربط الوحدات الإعلانية
عروض الأسعار
انتقِل إلى العرض > مقدِّمو عروض الأسعار، واختَر الشركة AppLovin ضمن علامة التبويب عروض الأسعار باستخدام حِزم تطوير البرامج (SDK).
انتقِل إلى علامة التبويب تعيين الوحدات الإعلانية وانقر على تعيين وحدة إعلانية جديدة.
اختَر وحدة إعلانية معيَّنة. اختر وحدة إعلانية شكلاً، وتطبيق للأجهزة الجوّالة كنوع المستودع، ثم تطبيق الأجهزة الجوّالة. بعد ذلك، أدخِل SDK Key الذي تم الحصول عليه في القسم السابق. وأخيرًا، انقر على حفظ.
شلال
انتقِل إلى عرض الإعلانات > مجموعات الأرباح وانقر على الزر مجموعة أرباح جديدة. اختر تطبيق الأجهزة الجوّالة.
انتقِل للأسفل وانقر على إضافة شريك أرباح.
حدد الشركة التي أنشأتها من أجلها AppLovin في القسم السابق. اختَر توسّط حزمة تطوير البرامج (SDK) للأجهزة الجوّالة باعتباره نوع الدمج وAndroid كالنظام الأساسي ونشط كالحالة.
أدخِل القيمة Application ID of your app along with the SDK Key and the Zone ID التي تم الحصول عليها في القسم السابق، وقيمة التكلفة التلقائية لكل ألف ظهور. انقر على حفظ.
ملاحظة: يستغرق جمع البيانات تلقائيًا بضعة أيام قبل أن يتمكّن من حساب قيمة التكلفة لكل ألف ظهور الديناميكية لشبكة التوسط بدقة. بعد احتساب التكلفة الفعلية لكل ألف ظهور، يتم تعديلها تلقائيًا نيابةً عنك.
Add AppLovin Corp. to GDPR and US state regulations ad partners list
اتّبِع الخطوات الواردة في إعدادات اللائحة العامة لحماية البيانات و إعدادات اللوائح السارية في الولايات الأمريكية لإضافة AppLovin Corp. إلى اللائحة العامة لحماية البيانات (GDPR) وقائمة شركاء الإعلانات للوائح الولايات الأمريكية في Ad Manager واجهة المستخدم.
Step 3: Import the AppLovin SDK and adapter
Android Studio integration (recommended)
In your app-level build.gradle.kts
file, add the following implementation
dependencies and configurations. Use the latest versions of the AppLovin SDK
and adapter:
dependencies {
implementation("com.google.android.gms:play-services-ads:23.3.0")
implementation("com.google.ads.mediation:applovin:12.6.0.0")
}
Manual integration
Download the AppLovin Android SDK, extract the
applovin-sdk-x.y.z.jar
, and add it to your project.Navigate to the AppLovin adapter artifacts on Google's Maven Repository. Select the latest version, download the AppLovin adapter's .aar file, and add it to your project.
Step 4: Implement privacy settings on AppLovin SDK
EU Consent and GDPR
Under the Google EU User Consent Policy, you must ensure that certain disclosures are given to, and consents obtained from, users in the European Economic Area (EEA) regarding the use of device identifiers and personal data. This policy reflects the requirements of the EU ePrivacy Directive and the General Data Protection Regulation (GDPR). When seeking consent, you must identify each ad network in your mediation chain that may collect, receive, or use personal data and provide information about each network's use. Google currently is unable to pass the user's consent choice to such networks automatically.
Since SDK version 12.0.0, AppLovin supports reading the consent string from shared preferences and setting the consent status accordingly.
If you are not using AppLovin SDK version 12.0.0+ or not using a CMP that writes
the consent string into the
shared preferences
, you can use setHasUserContent
and
setIsAgeRestrictedUser
methods. The following sample code shows how to pass
consent information to the AppLovin SDK. These options must be set before you
initialize the Google Mobile Ads SDK
to ensure they get forwarded properly to the AppLovin SDK.
Java
import com.applovin.sdk.AppLovinPrivacySettings;
// ...
AppLovinPrivacySettings.setHasUserConsent(true, context);
Kotlin
import com.applovin.sdk.AppLovinPrivacySettings
// ...
AppLovinPrivacySettings.setHasUserConsent(true, context)
Additionally, if the user is known to be in an age-restricted category, you can
also set the below flag to true
.
Java
AppLovinPrivacySettings.setIsAgeRestrictedUser(true, context);
Kotlin
AppLovinPrivacySettings.setIsAgeRestrictedUser(true, context)
See AppLovin's privacy settings for more information.
US states privacy laws
U.S. states privacy laws require giving users the right to opt out of the "sale" of their "personal information" (as the law defines those terms), with the opt-out offered via a prominent "Do Not Sell My Personal Information" link on the "selling" party's homepage. The U.S. states privacy laws compliance guide offers the ability to enable restricted data processing for Google ad serving, but Google is unable to apply this setting to each ad network in your mediation chain. Therefore, you must identify each ad network in your mediation chain that may participate in the sale of personal information and follow guidance from each of those networks to ensure compliance.
The AppLovin SDK includes the setDoNotSell
method to let publishers opt
out of the sale of personal information.
The following sample code shows how to pass this consent information to the AppLovin SDK. These options must be set before you initialize the Google Mobile Ads SDK to ensure they get forwarded properly to the AppLovin SDK.
Java
import com.applovin.sdk.AppLovinPrivacySettings;
// ...
AppLovinPrivacySettings.setDoNotSell(true, context);
Kotlin
import com.applovin.sdk.AppLovinPrivacySettings
// ...
AppLovinPrivacySettings.setDoNotSell(true, context)
See AppLovin's Privacy documentation for more information.
Step 5: Add required code
No additional code is required for AppLovin integration.
Step 6: Test your implementation
تفعيل الإعلانات التجريبية
احرص على تسجيل جهاز الاختبار من أجل Ad Manager وتفعيل وضع الاختبار في واجهة المستخدم AppLovin .
التحقّق من الإعلانات الاختبارية
للتأكّد من أنّك تتلقّى إعلانات اختبارية من AppLovin، فعِّل اختبار مصدر إعلان فردي في "أداة فحص الإعلانات" باستخدام AppLovin (Bidding) and AppLovin (Waterfall) مصادر الإعلانات.
Optional steps
Network-specific parameters
The AppLovin adapter supports setMuteAudio()
which can disable audio on
video ads. This method can be called from an AppLovinExtras.Builder()
object:
Java
Bundle extras = new AppLovinExtras.Builder()
.setMuteAudio(true)
.build();
AdManagerAdRequest request = new AdManagerAdRequest.Builder()
.addNetworkExtrasBundle(ApplovinAdapter.class, extras)
.build();
Kotlin
val extras = AppLovinExtras.Builder()
.setMuteAudio(true)
.build()
val request = AdManagerAdRequest.Builder()
.addNetworkExtrasBundle(ApplovinAdapter::class.java, extras)
.build()
Optimizations
Initializing the AppLovin SDK as soon as your app launches provides AppLovin the ability to track events as soon as the app starts.
Java
AppLovinSdk.getInstance("sdkKey", null, context).initializeSdk();
Kotlin
AppLovinSdk.getInstance("sdkKey", null, context).initializeSdk()
Error codes
If the adapter fails to receive an ad from AppLovin,
publishers can check the underlying error from the ad response using
ResponseInfo.getAdapterResponses()
under the following classes:
com.google.ads.mediation.applovin.ApplovinAdapter
com.google.ads.mediation.applovin.AppLovinMediationAdapter
Here are the codes and accompanying messages thrown by the AppLovin adapter when an ad fails to load:
Error code | Reason |
---|---|
-1009 to -1, 204 | AppLovin SDK returned an error. See AppLovin's documentation for more details. |
101 | The requested ad size does not match an AppLovin supported banner size. |
103 | Context is null. |
104 | AppLovin bid token is empty. |
105 | Requested multiple ads for the same zone. AppLovin can only load 1 ad at a time per zone. |
106 | Ad is not ready to display. |
108 | AppLovin Adapter does not support the ad format being requested. |
AppLovin Android Mediation Adapter Changelog
Version 12.6.0.0
- Verified compatibility with AppLovin SDK 12.6.0.
Built and tested with:
- Google Mobile Ads SDK version 23.2.0.
- AppLovin SDK version 12.6.0.
Version 12.5.0.1
- Added functionality to load a second interstitial or rewarded ad after the previous ad is loaded, if enabled through server parameters.
Built and tested with:
- Google Mobile Ads SDK version 23.1.0.
- AppLovin SDK version 12.5.0.
Version 12.5.0.0
- Updated the minimum required Google Mobile Ads SDK version to 23.1.0.
- Verified compatibility with AppLovin SDK 12.5.0.
Built and tested with:
- Google Mobile Ads SDK version 23.1.0.
- AppLovin SDK version 12.5.0.
Version 12.4.3.0
- Verified compatibility with AppLovin SDK 12.4.3.
Built and tested with:
- Google Mobile Ads SDK version 23.0.0.
- AppLovin SDK version 12.4.3.
Version 12.4.2.0
- Verified compatibility with AppLovin SDK 12.4.2.
Built and tested with:
- Google Mobile Ads SDK version 23.0.0.
- AppLovin SDK version 12.4.2.
Version 12.4.0.0
- Verified compatibility with AppLovin SDK 12.4.0.
Built and tested with:
- Google Mobile Ads SDK version 23.0.0.
- AppLovin SDK version 12.4.0.
Version 12.3.1.0
- Updated the minimum required Google Mobile Ads SDK version to 23.0.0.
- Verified compatibility with AppLovin SDK 12.3.1.
Built and tested with:
- Google Mobile Ads SDK version 23.0.0.
- AppLovin SDK version 12.3.1.
Version 12.3.0.0
- Verified compatibility with AppLovin SDK 12.3.0.
Built and tested with:
- Google Mobile Ads SDK version 22.6.0.
- AppLovin SDK version 12.3.0.
Version 12.2.0.0
- Verified compatibility with AppLovin SDK 12.2.0.
Built and tested with:
- Google Mobile Ads SDK version 22.6.0.
- AppLovin SDK version 12.2.0.
Version 12.1.0.1
- Added the possibility to load interstitial or rewarded ad right after requesting to show them if the server parameters are enabled.
Built and tested with:
- Google Mobile Ads SDK version 22.5.0.
- AppLovin SDK version 12.1.0.
Version 12.1.0.0
- Verified compatibility with AppLovin SDK 12.1.0.
- Fixed an issue that could cause
AppLovinSdkSettings
to be ignored. - Adapter no longer checks for the AppLovin SDK key from the
AndroidManifest.xml
file. - Updated the minimum required Google Mobile Ads SDK version to 22.5.0.
Built and tested with:
- Google Mobile Ads SDK version 22.5.0.
- AppLovin SDK version 12.1.0.
Version 11.11.3.0
- Verified compatibility with AppLovin SDK 11.11.3.
- Updated the minimum required Google Mobile Ads SDK version to 22.3.0.
Built and tested with:
- Google Mobile Ads SDK version 22.3.0.
- AppLovin SDK version 11.11.3.
Version 11.11.2.0
- Verified compatibility with AppLovin SDK 11.11.2.
Built and tested with:
- Google Mobile Ads SDK version 22.2.0.
- AppLovin SDK version 11.11.2.
Version 11.11.1.0
- Verified compatibility with AppLovin SDK 11.11.1.
Built and tested with:
- Google Mobile Ads SDK version 22.2.0.
- AppLovin SDK version 11.11.1.
Version 11.10.1.0
- Verified compatibility with AppLovin SDK 11.10.1.
Built and tested with:
- Google Mobile Ads SDK version 22.1.0.
- AppLovin SDK version 11.10.1.
Version 11.9.0.0
- Verified compatibility with AppLovin SDK 11.9.0.
Built and tested with:
- Google Mobile Ads SDK version 22.0.0.
- AppLovin SDK version 11.9.0.
Version 11.8.2.1
- Updated adapter to use new
VersionInfo
class. - Updated the minimum required Google Mobile Ads SDK version to 22.0.0.
Built and tested with:
- Google Mobile Ads SDK version 22.0.0.
- AppLovin SDK version 11.8.2.
Version 11.8.2.0
- Verified compatibility with AppLovin SDK 11.8.2.
- Added watermark support for bidding ads.
- Added support for MREC size banner ads.
Built and tested with:
- Google Mobile Ads SDK version 21.5.0.
- AppLovin SDK version 11.8.2.
Version 11.7.1.0
- Verified compatibility with AppLovin SDK 11.7.1.
- Updated the minimum required Google Mobile Ads SDK version to 21.5.0.
Built and tested with:
- Google Mobile Ads SDK version 21.5.0.
- AppLovin SDK version 11.7.1.
Version 11.7.0.0
- Verified compatibility with AppLovin SDK 11.7.0.
- Updated the minimum required Google Mobile Ads SDK version to 21.4.0.
Built and tested with:
- Google Mobile Ads SDK version 21.4.0.
- AppLovin SDK version 11.7.0.
Version 11.6.1.0
- Verified compatibility with AppLovin SDK 11.6.1.
- Updated the minimum required Google Mobile Ads SDK version to 21.4.0.
Built and tested with:
- Google Mobile Ads SDK version 21.4.0.
- AppLovin SDK version 11.6.1.
Version 11.6.0.0
- Verified compatibility with AppLovin SDK 11.6.0.
Built and tested with:
- Google Mobile Ads SDK version 21.3.0.
- AppLovin SDK version 11.6.0.
Version 11.5.5.0
- Verified compatibility with AppLovin SDK 11.5.5.
Built and tested with:
- Google Mobile Ads SDK version 21.3.0.
- AppLovin SDK version 11.5.5.
Version 11.5.4.0
- Verified compatibility with AppLovin SDK 11.5.4.
Built and tested with:
- Google Mobile Ads SDK version 21.3.0.
- AppLovin SDK version 11.5.4.
Version 11.5.3.1
- Fixed an issue that can cause
NullPointerException
when loading rewarded ads.
Built and tested with:
- Google Mobile Ads SDK version 21.3.0.
- AppLovin SDK version 11.5.3.
Version 11.5.3.0
- Verified compatibility with AppLovin SDK 11.5.3.
- Updated the minimum required Google Mobile Ads SDK version to 21.3.0.
Built and tested with:
- Google Mobile Ads SDK version 21.3.0.
- AppLovin SDK version 11.5.3.
Version 11.5.2.0
- Fixed an issue where rewarded ad requests continuously fail if the initial rewarded ad request times out.
- Verified compatibility with AppLovin SDK 11.5.2.
Built and tested with:
- Google Mobile Ads SDK version 21.2.0.
- AppLovin SDK version 11.5.2.
Version 11.5.1.0
- Verified compatibility with AppLovin SDK 11.5.1.
Built and tested with:
- Google Mobile Ads SDK version 21.2.0.
- AppLovin SDK version 11.5.1.
Version 11.5.0.0
- Verified compatibility with AppLovin SDK 11.5.0.
Built and tested with:
- Google Mobile Ads SDK version 21.2.0.
- AppLovin SDK version 11.5.0.
Version 11.4.6.0
- Verified compatibility with AppLovin SDK 11.4.6.
- Updated the minimum required Google Mobile Ads SDK version to 21.2.0.
Built and tested with:
- Google Mobile Ads SDK version 21.2.0.
- AppLovin SDK version 11.4.6.
Version 11.4.5.0
- Verified compatibility with AppLovin SDK 11.4.5.
- Updated the minimum required Google Mobile Ads SDK version to 21.1.0.
Built and tested with:
- Google Mobile Ads SDK version 21.1.0.
- AppLovin SDK version 11.4.5.
Version 11.4.4.0
- Verified compatibility with AppLovin SDK 11.4.4.
Built and tested with:
- Google Mobile Ads SDK version 21.0.0.
- AppLovin SDK version 11.4.4.
Version 11.4.3.0
- Verified compatibility with AppLovin SDK 11.4.3.
Built and tested with:
- Google Mobile Ads SDK version 21.0.0.
- AppLovin SDK version 11.4.3.
Version 11.4.2.0
- Verified compatibility with AppLovin SDK 11.4.2.
- Updated the minimum required Google Mobile Ads SDK version to 21.0.0.
- Updated the minimum required Android API level to 19.
Built and tested with:
- Google Mobile Ads SDK version 21.0.0.
- AppLovin SDK version 11.4.2.
Version 11.4.0.0
- Verified compatibility with AppLovin SDK 11.4.0.
- Updated
compileSdkVersion
andtargetSdkVersion
to API 31.
Built and tested with:
- Google Mobile Ads SDK version 20.6.0.
- AppLovin SDK version 11.4.0.
Version 11.3.3.0
- Verified compatibility with AppLovin SDK 11.3.3.
Built and tested with:
- Google Mobile Ads SDK version 20.6.0.
- AppLovin SDK version 11.3.3.
Version 11.3.2.0
- Verified compatibility with AppLovin SDK 11.3.2.
Built and tested with:
- Google Mobile Ads SDK version 20.6.0.
- AppLovin SDK version 11.3.2.
Version 11.3.1.0
- Verified compatibility with AppLovin SDK 11.3.1.
Built and tested with:
- Google Mobile Ads SDK version 20.6.0.
- AppLovin SDK version 11.3.1.
Version 11.3.0.0
- Verified compatibility with AppLovin SDK 11.3.0.
Built and tested with:
- Google Mobile Ads SDK version 20.6.0.
- AppLovin SDK version 11.3.0.
Version 11.2.2.0
- Verified compatibility with AppLovin SDK 11.2.2.
Built and tested with:
- Google Mobile Ads SDK version 20.6.0.
- AppLovin SDK version 11.2.2.
Version 11.2.1.0
- Verified compatibility with AppLovin SDK 11.2.1.
Built and tested with:
- Google Mobile Ads SDK version 20.6.0.
- AppLovin SDK version 11.2.1.
Version 11.1.3.0
- Verified compatibility with AppLovin SDK 11.1.3.
- Updated the minimum required Google Mobile Ads SDK version to 20.6.0.
Built and tested with:
- Google Mobile Ads SDK version 20.6.0.
- AppLovin SDK version 11.1.3.
Version 11.1.2.0
- Verified compatibility with AppLovin SDK 11.1.2.
Built and tested with:
- Google Mobile Ads SDK version 20.5.0.
- AppLovin SDK version 11.1.2.
Version 11.1.0.0
- Verified compatibility with AppLovin SDK 11.1.0.
Built and tested with:
- Google Mobile Ads SDK version 20.5.0.
- AppLovin SDK version 11.1.0.
Version 11.0.0.0
- Verified compatibility with AppLovin SDK 11.0.0.
- Updated the
AppLovinMediationAdapter.getSdkSettings()
method to require aContext
parameter. - Updated the minimum required Google Mobile Ads SDK version to 20.5.0.
Built and tested with:
- Google Mobile Ads SDK version 20.5.0.
- AppLovin SDK version 11.0.0.
Version 10.3.5.0
- Verified compatibility with AppLovin SDK 10.3.5.
Built and tested with:
- Google Mobile Ads SDK version 20.4.0.
- AppLovin SDK version 10.3.5.
Version 10.3.4.0
- Verified compatibility with AppLovin SDK 10.3.4.
- Updated the minimum required Google Mobile Ads SDK version to 20.4.0.
Built and tested with:
- Google Mobile Ads SDK version 20.4.0.
- AppLovin SDK version 10.3.4.
Version 10.3.3.0
- Verified compatibility with AppLovin SDK 10.3.3.
- Updated the minimum required Google Mobile Ads SDK version to 20.3.0.
Built and tested with:
- Google Mobile Ads SDK version 20.3.0.
- AppLovin SDK version 10.3.3.
Version 10.3.2.0
- Verified compatibility with AppLovin SDK 10.3.2.
- Added standardized adapter error codes and messages.
Built and tested with:
- Google Mobile Ads SDK version 20.2.0.
- AppLovin SDK version 10.3.2.
Version 10.3.1.0
- Verified compatibility with AppLovin SDK 10.3.1.
- Updated the minimum required Google Mobile Ads SDK version to 20.2.0.
Built and tested with:
- Google Mobile Ads SDK version 20.2.0.
- AppLovin SDK version 10.3.1.
Version 10.3.0.0
- Verified compatibility with AppLovin SDK 10.3.0.
Built and tested with:
- Google Mobile Ads SDK version 20.1.0.
- AppLovin SDK version 10.3.0.
Version 10.2.1.0
- Verified compatibility with AppLovin SDK 10.2.1.
- The adapter will now attempt to initialize the AppLovin SDK before requesting ads.
Built and tested with:
- Google Mobile Ads SDK version 20.1.0.
- AppLovin SDK version 10.2.1.
Version 10.2.0.0
- Verified compatibility with AppLovin SDK 10.2.0.
Built and tested with:
- Google Mobile Ads SDK version 20.1.0.
- AppLovin SDK version 10.2.0.
Version 10.1.2.0
- Verified compatibility with AppLovin SDK 10.1.2.
- Updated the minimum required Google Mobile Ads SDK version to 20.1.0.
Built and tested with:
- Google Mobile Ads SDK version 20.1.0.
- AppLovin SDK version 10.1.2.
Version 10.0.1.0
- Verified compatibility with AppLovin SDK 10.0.1.
- Updated the minimum required Google Mobile Ads SDK version to 20.0.0.
- Updated AppLovin adapter for new gradle publication settings.
Built and tested with:
- Google Mobile Ads SDK version 20.0.0.
- AppLovin SDK version 10.0.1.
Version 9.15.2.0
- Verified compatibility with AppLovin SDK 9.15.2.
- Updated the minimum required Google Mobile Ads SDK version to 19.7.0.
Built and tested with:
- Google Mobile Ads SDK version 19.7.0.
- AppLovin SDK version 9.15.2.
Version 9.14.12.0
- Verified compatibility with AppLovin SDK 9.14.12.
- Updated the minimum required Google Mobile Ads SDK version to 19.6.0.
Built and tested with:
- Google Mobile Ads SDK version 19.6.0.
- AppLovin SDK version 9.14.12.
Version 9.14.7.0
- Verified compatibility with AppLovin SDK 9.14.7.
- Added the
AppLovinMediationAdapter.getSdkSettings()
method. Publishers may now configure AppLovin SDK settings through these options.
Built and tested with:
- Google Mobile Ads SDK version 19.5.0.
- AppLovin SDK version 9.14.7.
Version 9.14.6.0
- Verified compatibility with AppLovin SDK 9.14.6.
- Updated the minimum required Google Mobile Ads SDK version to 19.5.0.
Built and tested with:
- Google Mobile Ads SDK version 19.5.0.
- AppLovin SDK version 9.14.6.
Version 9.14.5.0
- Verified compatibility with AppLovin SDK 9.14.5.
- Updated the minimum required Google Mobile Ads SDK version to 19.5.0.
Built and tested with:
- Google Mobile Ads SDK version 19.5.0.
- AppLovin SDK version 9.14.5.
Version 9.14.4.0
- Removed support for Native ads and Medium Rectangle banner ads.
- Adapter can now load and request ads using an
Application
context. - Verified compatibility with AppLovin SDK 9.14.4.
Built and tested with:
- Google Mobile Ads SDK version 19.4.0.
- AppLovin SDK version 9.14.4.
Version 9.13.4.0
- Verified compatibility with AppLovin SDK 9.13.4.
- Updated the minimum required Google Mobile Ads SDK version to 19.4.0.
Built and tested with:
- Google Mobile Ads SDK version 19.4.0.
- AppLovin SDK version 9.13.4.
Version 9.13.3.0
- Verified compatibility with AppLovin SDK 9.13.3.
Built and tested with:
- Google Mobile Ads SDK version 19.3.0.
- AppLovin SDK version 9.13.3.
Version 9.13.2.0
- Verified compatibility with AppLovin SDK 9.13.2.
- Updated the minimum required Google Mobile Ads SDK version to 19.3.0.
Built and tested with:
- Google Mobile Ads SDK version 19.3.0.
- AppLovin SDK version 9.13.2.
Version 9.13.1.0
- Verified compatibility with AppLovin SDK 9.13.1.
- Adapter now throws an error if multiple interstitial ads are requested using the same Zone ID.
Built and tested with:
- Google Mobile Ads SDK version 19.2.0.
- AppLovin SDK version 9.13.1.
Version 9.13.0.0
- Updated the adapter to support inline adaptive banner requests.
- Verified compatibility with AppLovin SDK 9.13.0.
- Updated the minimum required Google Mobile Ads SDK version to 19.2.0.
Built and tested with:
- Google Mobile Ads SDK version 19.2.0.
- AppLovin SDK version 9.13.0.
Version 9.12.8.0
- Verified compatibility with AppLovin SDK 9.12.8.
Built and tested with:
- Google Mobile Ads SDK version 19.1.0.
- AppLovin SDK version 9.12.8.
Version 9.12.7.0
- Verified compatibility with AppLovin SDK 9.12.7.
Built and tested with:
- Google Mobile Ads SDK version 19.1.0.
- AppLovin SDK version 9.12.7.
Version 9.12.6.1
- Fixed bug introduced in 9.11.4.1 where bidding banner ads timeout.
Built and tested with:
- Google Mobile Ads SDK version 19.1.0.
- AppLovin SDK version 9.12.6.
Version 9.12.6.0
- Verified compatibility with AppLovin SDK 9.12.6.
Built and tested with:
- Google Mobile Ads SDK version 19.1.0.
- AppLovin SDK version 9.12.6.
Version 9.12.5.0
- Verified compatibility with AppLovin SDK 9.12.5.
Built and tested with:
- Google Mobile Ads SDK version 19.1.0.
- AppLovin SDK version 9.12.5.
Version 9.12.4.0
- Verified compatibility with AppLovin SDK 9.12.4.
- Adapter now requires an
Activity
context to initialize and load ads from AppLovin.
Built and tested with:
- Google Mobile Ads SDK version 19.1.0.
- AppLovin SDK version 9.12.4.
Version 9.12.3.0
- Verified compatibility with AppLovin SDK 9.12.3.
Built and tested with:
- Google Mobile Ads SDK version 19.1.0.
- AppLovin SDK version 9.12.3.
Version 9.12.2.0
- Verified compatibility with AppLovin SDK 9.12.2.
Built and tested with:
- Google Mobile Ads SDK version 19.1.0.
- AppLovin SDK version 9.12.2.
Version 9.12.1.0
- Verified compatibility with AppLovin SDK 9.12.1.
- Updated the minimum required Google Mobile Ads SDK version to 19.1.0.
Built and tested with:
- Google Mobile Ads SDK version 19.1.0.
- AppLovin SDK version 9.12.1.
Version 9.12.0.0
- Verified compatibility with AppLovin SDK 9.12.0.
Built and tested with:
- Google Mobile Ads SDK version 19.0.1.
- AppLovin SDK version 9.12.0.
Version 9.11.4.1
- Fixed an issue that may cause bidding banner/interstitial ad requests to timeout.
- Added descriptive error codes and reasons for adapter load/show failures.
- Updated the minimum required Google Mobile Ads SDK version to 19.0.1.
Built and tested with:
- Google Mobile Ads SDK version 19.0.1.
- AppLovin SDK version 9.11.4.
Version 9.11.4.0
- Verified compatibility with AppLovin SDK 9.11.4.
Built and tested with:
- Google Mobile Ads SDK version 18.3.0.
- AppLovin SDK version 9.11.4.
Version 9.11.2.0
- Verified compatibility with AppLovin SDK 9.11.2.
Built and tested with:
- Google Mobile Ads SDK version 18.3.0.
- AppLovin SDK version 9.11.2.
Version 9.11.1.0
- Verified compatibility with AppLovin SDK 9.11.1.
Built and tested with:
- Google Mobile Ads SDK version 18.3.0.
- AppLovin SDK version 9.11.1.
Version 9.10.5.0
- Verified compatibility with AppLovin SDK 9.10.5.
Built and tested with:
- Google Mobile Ads SDK version 18.3.0.
- AppLovin SDK version 9.10.5.
Version 9.9.1.2
- Removed all references to AppLovin placement ID.
- Updated the minimum required Google Mobile Ads SDK version to 18.3.0.
Built and tested with:
- Google Mobile Ads SDK version 18.3.0.
- AppLovin SDK version 9.9.1.
Version 9.9.1.1
- Native ads now leverage the unified native ads mediation API.
Built and tested with:
- Google Mobile Ads SDK version 18.2.0.
- AppLovin SDK version 9.9.1.
Version 9.9.1.0
- Verified compatibility with AppLovin SDK 9.9.1.
- Updated the minimum required Google Mobile Ads SDK version to 18.2.0.
Version 9.8.0.0
- Verified compatibility with AppLovin SDK 9.8.0.
- Updated the minimum required Google Mobile Ads SDK version to 18.1.1.
Version 9.7.2.0
- Verified compatibility with AppLovin SDK 9.7.2.
- Updated the minimum required Google Mobile Ads SDK version to 18.1.0.
Version 9.4.2.0
- Added bidding capability to the adapter for banner, interstitial and rewarded ads.
- Added support for flexible banner ad sizes.
- Verified compatibility with AppLovin SDK 9.4.2.
Version 9.2.1.1
- Updated adapter to support new open-beta Rewarded API.
- Updated the minimum required Google Mobile Ads SDK version to 17.2.0.
Version 9.2.1.0
- Verified compatibility with AppLovin SDK 9.2.1
Version 9.1.3.0
- Removed support for placements as they were deprecated by AppLovin SDK.
- Verified compatibility with AppLovin SDK 9.1.3
Version 9.1.0.0
- Verified compatibility with AppLovin SDK 9.1.0
Version 8.1.4.0
- Verified compatibility with AppLovin SDK 8.1.4
Version 8.1.3.0
- Verified compatibility with AppLovin SDK 8.1.3
Version 8.1.0.0
- Verified compatibility with AppLovin SDK 8.1.0
Version 8.0.2.1
- Updated the adapter to invoke the
onRewardedVideoComplete()
ad event.
Version 8.0.2.0
- Verified compatibility with AppLovin SDK 8.0.2
Version 8.0.1.1
- Added support for native ads.
- Set AdMob as mediation provider on the AppLovin SDK.
Version 8.0.1.0
- Verified compatibility with AppLovin SDK 8.0.1
Version 8.0.0.0
- Verified compatibility with AppLovin SDK 8.0.0
Version 7.8.6.0
- Verified compatibility with AppLovin SDK 7.8.6
Version 7.8.5.0
- Added support for zones and smart banners.
- Verified compatibility with AppLovin SDK 7.8.5.
Version 7.7.0.0
- Verified compatibility with AppLovin SDK 7.7.0.
Version 7.6.2.0
- Verified compatibility with AppLovin SDK 7.6.2.
Version 7.6.1.0
- Verified compatibility with AppLovin SDK 7.6.1.
Version 7.6.0.0
- Verified compatibility with AppLovin SDK 7.6.0.
Version 7.5.0.0
- Verified compatibility with AppLovin SDK 7.5.0.
Version 7.4.1.1
- Added support for banner ads.
Version 7.4.1.0
- Verified compatibility with AppLovin SDK 7.4.1.
Version 7.3.2.0
- Added support for interstitial ads.
Earlier versions
- Added support for rewarded video ads.