Sie können Ihrer 3D-Karte Animationen von Kamerapfaden hinzufügen, um Nutzern ein noch intensiveres Erlebnis zu bieten. Bei Animationen des Kamerapfads kann die Kamera zu einem Punkt auf der Karte fliegen oder diesen umkreisen.
Anfliegen
Im folgenden Codebeispiel wird gezeigt, wie die Kamera animiert wird, um zu einem bestimmten Punkt auf einer 3D-Karte zu fliegen. Dazu wird die Methode flyCameraTo aufgerufen. Wenn Sie dieses Codebeispiel verwenden möchten, folgen Sie der Anleitung unter Einrichtung und 3D-Karte in Ihre App einfügen, um Ihr Android Studio-Projekt mit einer einfachen 3D-Karte einzurichten. Fügen Sie dann der Datei MainActivity.kt den folgenden Code hinzu:
// Add imports and define constantsimportcom.google.android.gms.maps3d.model.latLngAltitudeconstvalEMPIRE_STATE_BUILDING_LATITUDE=40.748233constvalEMPIRE_STATE_BUILDING_LONGITUDE=-73.985663...// Add to the onMap3DViewReady method, after the googleMap3D object has been initializedgoogleMap3D.flyCameraTo(flyToOptions{endCamera=camera{center=latLngAltitude{latitude=EMPIRE_STATE_BUILDING_LATITUDElongitude=EMPIRE_STATE_BUILDING_LONGITUDEaltitude=212.0// in meters}heading=34.0// bearing in degreestilt=67.0// relative to verticalrange=750.0// distance away from the focal point in metersroll=0.0// roll relative to horizontal}durationInMillis=2_000})
Umherfliegen
Im folgenden Codebeispiel wird gezeigt, wie die Kamera animiert wird, um einen bestimmten Punkt auf einer 3D-Karte zu umkreisen. Dazu wird die Methode flyCameraAround aufgerufen. Wenn Sie dieses Codebeispiel verwenden möchten, folgen Sie der Anleitung unter Einrichtung und 3D-Karte in die App einfügen, um Ihr Android Studio-Projekt mit einer einfachen 3D-Karte einzurichten. Fügen Sie dann den folgenden Code in die Datei MainActivity.kt ein:
// Add imports and define constantsimportcom.google.android.gms.maps3d.model.latLngAltitudeconstvalEMPIRE_STATE_BUILDING_LATITUDE=40.748233constvalEMPIRE_STATE_BUILDING_LONGITUDE=-73.985663...// Add to the onMap3DViewReady method, after the googleMap3D object has been initializedgoogleMap3D.flyCameraAround(flyAroundOptions{center=camera{center=latLngAltitude{latitude=EMPIRE_STATE_BUILDING_LATITUDElongitude=EMPIRE_STATE_BUILDING_LONGITUDEaltitude=212.0}heading=34.0tilt=67.0range=750.0roll=0.0}durationInMillis=5_000rounds=1.0// Number of rotations - can be fractional})
[[["Leicht verständlich","easyToUnderstand","thumb-up"],["Mein Problem wurde gelöst","solvedMyProblem","thumb-up"],["Sonstiges","otherUp","thumb-up"]],[["Benötigte Informationen nicht gefunden","missingTheInformationINeed","thumb-down"],["Zu umständlich/zu viele Schritte","tooComplicatedTooManySteps","thumb-down"],["Nicht mehr aktuell","outOfDate","thumb-down"],["Problem mit der Übersetzung","translationIssue","thumb-down"],["Problem mit Beispielen/Code","samplesCodeIssue","thumb-down"],["Sonstiges","otherDown","thumb-down"]],["Zuletzt aktualisiert: 2025-09-05 (UTC)."],[],[],null,["# Add camera path animations\n\nSelect platform: [Android](/maps/documentation/maps-3d/android-sdk/custom-camera-paths \"View this page for the Android platform docs.\") [iOS](/maps/documentation/maps-3d/ios-sdk/custom-camera-paths \"View this page for the iOS platform docs.\")\n\n\u003cbr /\u003e\n\n| This product or feature is Experimental (pre-GA). Pre-GA products and features might have limited support, and changes to pre-GA products and features might not be compatible with other pre-GA versions. Pre-GA Offerings are covered by the [Google\n| Maps Platform Service Specific Terms](https://cloud.google.com/maps-platform/terms/maps-service-terms). For more information, see the [launch stage descriptions](/maps/launch-stages).\n\n\nYou can add camera paths animations to your 3D map to provide a more immersive\nexperience for your users. Camera path animations can fly to or fly around a point on the map.\n\nFly to\n------\n\n\nThe following code sample demonstrates how to animate the camera to fly to a specific point on a 3D map by calling\nthe [`flyCameraTo`](/maps/documentation/maps-3d/android-sdk/reference/com/google/android/gms/maps3d/GoogleMap3D#flyCameraTo(com.google.android.gms.maps3d.model.FlyToOptions))\nmethod. To use this code sample, follow the instructions in\n[Setup](/maps/documentation/maps-3d/android-sdk/setup) and\n[Add a 3D map to your app](/maps/documentation/maps-3d/android-sdk/add-a-3d-map) to set\nup your Android Studio project with a basic 3D map. Then, add the following code to the\n**`MainActivity.kt`** file: \n\n```kotlin\n// Add imports and define constants\nimport com.google.android.gms.maps3d.model.latLngAltitude\nconst val EMPIRE_STATE_BUILDING_LATITUDE = 40.748233\nconst val EMPIRE_STATE_BUILDING_LONGITUDE = -73.985663\n\n...\n \n// Add to the onMap3DViewReady method, after the googleMap3D object has been initialized\ngoogleMap3D.flyCameraTo(\n flyToOptions {\n endCamera = camera {\n center = latLngAltitude {\n latitude = EMPIRE_STATE_BUILDING_LATITUDE\n longitude = EMPIRE_STATE_BUILDING_LONGITUDE\n altitude = 212.0 // in meters\n }\n heading = 34.0 // bearing in degrees\n tilt = 67.0 // relative to vertical\n range = 750.0 // distance away from the focal point in meters\n roll = 0.0 // roll relative to horizontal\n }\n durationInMillis = 2_000\n }\n)\n```\n\nFly around\n----------\n\n\nThe following code sample demonstrates how to animate the camera to fly around a specific point on a 3D map by\ncalling the [`flyCameraAround`](/maps/documentation/maps-3d/android-sdk/reference/com/google/android/gms/maps3d/GoogleMap3D#flyCameraAround(com.google.android.gms.maps3d.model.FlyAroundOptions))\nmethod. To use this code sample, follow the\ninstructions in\n[Setup](/maps/documentation/maps-3d/android-sdk/setup) and\n[Add a 3D map to your app](/maps/documentation/maps-3d/android-sdk/add-a-3d-map)\nto set up your Android Studio project with a basic 3D map. Then, add the\nfollowing code to the **`MainActivity.kt`** file: \n\n```kotlin\n// Add imports and define constants\nimport com.google.android.gms.maps3d.model.latLngAltitude\nconst val EMPIRE_STATE_BUILDING_LATITUDE = 40.748233\nconst val EMPIRE_STATE_BUILDING_LONGITUDE = -73.985663\n\n...\n\n// Add to the onMap3DViewReady method, after the googleMap3D object has been initialized\ngoogleMap3D.flyCameraAround(\n flyAroundOptions {\n center = camera {\n center = latLngAltitude {\n latitude = EMPIRE_STATE_BUILDING_LATITUDE\n longitude = EMPIRE_STATE_BUILDING_LONGITUDE\n altitude = 212.0\n }\n heading = 34.0\n tilt = 67.0\n range = 750.0\n roll = 0.0\n }\n durationInMillis = 5_000\n rounds = 1.0 // Number of rotations - can be fractional\n }\n)\n```"]]
