Package google.maps.routing.v2

Index

Routes

The Routes API.

ComputeRouteMatrix

rpc ComputeRouteMatrix(ComputeRouteMatrixRequest) returns (RouteMatrixElement)

Takes in a list of origins and destinations and returns a stream containing route information for each combination of origin and destination.

NOTE: This method requires that you specify a response field mask in the input. You can provide the response field mask by using the URL parameter $fields or fields, or by using the HTTP/gRPC header X-Goog-FieldMask (see the available URL parameters and headers). The value is a comma separated list of field paths. See this detailed documentation about how to construct the field paths.

For example, in this method:

  • Field mask of all available fields (for manual inspection): X-Goog-FieldMask: *
  • Field mask of route durations, distances, element status, condition, and element indices (an example production setup): X-Goog-FieldMask: originIndex,destinationIndex,status,condition,distanceMeters,duration

It is critical that you include status in your field mask as otherwise all messages will appear to be OK. Google discourages the use of the wildcard (*) response field mask, because:

  • Selecting only the fields that you need helps our server save computation cycles, allowing us to return the result to you with a lower latency.
  • Selecting only the fields that you need in your production job ensures stable latency performance. We might add more response fields in the future, and those new fields might require extra computation time. If you select all fields, or if you select all fields at the top level, then you might experience performance degradation because any new field we add will be automatically included in the response.
  • Selecting only the fields that you need results in a smaller response size, and thus higher network throughput.
ComputeRoutes

rpc ComputeRoutes(ComputeRoutesRequest) returns (ComputeRoutesResponse)

Returns the primary route along with optional alternate routes, given a set of terminal and intermediate waypoints.

NOTE: This method requires that you specify a response field mask in the input. You can provide the response field mask by using URL parameter $fields or fields, or by using an HTTP/gRPC header X-Goog-FieldMask (see the available URL parameters and headers). The value is a comma separated list of field paths. See detailed documentation about how to construct the field paths.

For example, in this method:

  • Field mask of all available fields (for manual inspection): X-Goog-FieldMask: *
  • Field mask of Route-level duration, distance, and polyline (an example production setup): X-Goog-FieldMask: routes.duration,routes.distanceMeters,routes.polyline.encodedPolyline

Google discourage the use of the wildcard (*) response field mask, or specifying the field mask at the top level (routes), because:

  • Selecting only the fields that you need helps our server save computation cycles, allowing us to return the result to you with a lower latency.
  • Selecting only the fields that you need in your production job ensures stable latency performance. We might add more response fields in the future, and those new fields might require extra computation time. If you select all fields, or if you select all fields at the top level, then you might experience performance degradation because any new field we add will be automatically included in the response.
  • Selecting only the fields that you need results in a smaller response size, and thus higher network throughput.

ComputeRouteMatrixRequest

ComputeRouteMatrix request message

Fields
origins[]

RouteMatrixOrigin

Required. Array of origins, which determines the rows of the response matrix. Several size restrictions apply to the cardinality of origins and destinations:

  • The sum of the number of origins + the number of destinations specified as either place_id or address must be no greater than 50.
  • The product of number of origins × number of destinations must be no greater than 625 in any case.
  • The product of the number of origins × number of destinations must be no greater than 100 if routing_preference is set to TRAFFIC_AWARE_OPTIMAL.
  • The product of the number of origins × number of destinations must be no greater than 100 if travel_mode is set to TRANSIT.
destinations[]

RouteMatrixDestination

Required. Array of destinations, which determines the columns of the response matrix.

travel_mode

RouteTravelMode

Optional. Specifies the mode of transportation.

routing_preference

RoutingPreference

Optional. Specifies how to compute the route. The server attempts to use the selected routing preference to compute the route. If the routing preference results in an error or an extra long latency, an error is returned. You can specify this option only when the travel_mode is DRIVE or TWO_WHEELER, otherwise the request fails.

departure_time

Timestamp

Optional. The departure time. If you don't set this value, then this value defaults to the time that you made the request. NOTE: You can only specify a departure_time in the past when RouteTravelMode is set to TRANSIT.

arrival_time

Timestamp

Optional. The arrival time. NOTE: Can only be set when RouteTravelMode is set to TRANSIT. You can specify either departure_time or arrival_time, but not both.

language_code

string

Optional. The BCP-47 language code, such as "en-US" or "sr-Latn". For more information, see Unicode Locale Identifier. See Language Support for the list of supported languages. When you don't provide this value, the display language is inferred from the location of the first origin.

region_code

string

Optional. The region code, specified as a ccTLD ("top-level domain") two-character value. For more information see Country code top-level domains.

units

Units

Optional. Specifies the units of measure for the display fields.

extra_computations[]

ExtraComputation

Optional. A list of extra computations which may be used to complete the request. Note: These extra computations may return extra fields on the response. These extra fields must also be specified in the field mask to be returned in the response.

traffic_model

TrafficModel

Optional. Specifies the assumptions to use when calculating time in traffic. This setting affects the value returned in the duration field in the RouteMatrixElement which contains the predicted time in traffic based on historical averages. RoutingPreference to TRAFFIC_AWARE_OPTIMAL and RouteTravelMode to DRIVE. Defaults to BEST_GUESS if traffic is requested and TrafficModel is not specified.

transit_preferences

TransitPreferences

Optional. Specifies preferences that influence the route returned for TRANSIT routes. NOTE: You can only specify a transit_preferences when RouteTravelMode is set to TRANSIT.

ExtraComputation

Extra computations to perform while completing the request.

Enums
EXTRA_COMPUTATION_UNSPECIFIED Not used. Requests containing this value will fail.
TOLLS Toll information for the matrix element(s).

ComputeRoutesRequest

ComputeRoutes request message.

Fields
origin

Waypoint

Required. Origin waypoint.

destination

Waypoint

Required. Destination waypoint.

intermediates[]

Waypoint

Optional. A set of waypoints along the route (excluding terminal points), for either stopping at or passing by. Up to 25 intermediate waypoints are supported.

travel_mode

RouteTravelMode

Optional. Specifies the mode of transportation.

routing_preference

RoutingPreference

Optional. Specifies how to compute the route. The server attempts to use the selected routing preference to compute the route. If the routing preference results in an error or an extra long latency, then an error is returned. You can specify this option only when the travel_mode is DRIVE or TWO_WHEELER, otherwise the request fails.

polyline_quality

PolylineQuality

Optional. Specifies your preference for the quality of the polyline.

polyline_encoding

PolylineEncoding

Optional. Specifies the preferred encoding for the polyline.

departure_time

Timestamp

Optional. The departure time. If you don't set this value, then this value defaults to the time that you made the request. NOTE: You can only specify a departure_time in the past when RouteTravelMode is set to TRANSIT. Transit trips are available for up to 7 days in the past or 100 days in the future.

arrival_time

Timestamp

Optional. The arrival time. NOTE: Can only be set when RouteTravelMode is set to TRANSIT. You can specify either departure_time or arrival_time, but not both. Transit trips are available for up to 7 days in the past or 100 days in the future.

compute_alternative_routes

bool

Optional. Specifies whether to calculate alternate routes in addition to the route. No alternative routes are returned for requests that have intermediate waypoints.

route_modifiers

RouteModifiers

Optional. A set of conditions to satisfy that affect the way routes are calculated.

language_code

string

Optional. The BCP-47 language code, such as "en-US" or "sr-Latn". For more information, see Unicode Locale Identifier. See Language Support for the list of supported languages. When you don't provide this value, the display language is inferred from the location of the route request.

region_code

string

Optional. The region code, specified as a ccTLD ("top-level domain") two-character value. For more information see Country code top-level domains.

units

Units

Optional. Specifies the units of measure for the display fields. These fields include the instruction field in NavigationInstruction. The units of measure used for the route, leg, step distance, and duration are not affected by this value. If you don't provide this value, then the display units are inferred from the location of the first origin.

optimize_waypoint_order

bool

Optional. If set to true, the service attempts to minimize the overall cost of the route by re-ordering the specified intermediate waypoints. The request fails if any of the intermediate waypoints is a via waypoint. Use ComputeRoutesResponse.Routes.optimized_intermediate_waypoint_index to find the new ordering. If ComputeRoutesResponseroutes.optimized_intermediate_waypoint_index is not requested in the X-Goog-FieldMask header, the request fails. If optimize_waypoint_order is set to false, ComputeRoutesResponse.optimized_intermediate_waypoint_index will be empty.

requested_reference_routes[]

ReferenceRoute

Optional. Specifies what reference routes to calculate as part of the request in addition to the default route. A reference route is a route with a different route calculation objective than the default route. For example a FUEL_EFFICIENT reference route calculation takes into account various parameters that would generate an optimal fuel efficient route. When using this feature, look for route_labels on the resulting routes.

extra_computations[]

ExtraComputation

Optional. A list of extra computations which may be used to complete the request. Note: These extra computations may return extra fields on the response. These extra fields must also be specified in the field mask to be returned in the response.

traffic_model

TrafficModel

Optional. Specifies the assumptions to use when calculating time in traffic. This setting affects the value returned in the duration field in the Route and RouteLeg which contains the predicted time in traffic based on historical averages. TrafficModel is only available for requests that have set RoutingPreference to TRAFFIC_AWARE_OPTIMAL and RouteTravelMode to DRIVE. Defaults to BEST_GUESS if traffic is requested and TrafficModel is not specified.

transit_preferences

TransitPreferences

Optional. Specifies preferences that influence the route returned for TRANSIT routes. NOTE: You can only specify a transit_preferences when RouteTravelMode is set to TRANSIT.

ExtraComputation

Extra computations to perform while completing the request.

Enums
EXTRA_COMPUTATION_UNSPECIFIED Not used. Requests containing this value will fail.
TOLLS Toll information for the route(s).
FUEL_CONSUMPTION Estimated fuel consumption for the route(s).
TRAFFIC_ON_POLYLINE Traffic aware polylines for the route(s).
HTML_FORMATTED_NAVIGATION_INSTRUCTIONS NavigationInstructions presented as a formatted HTML text string. This content is meant to be read as-is. This content is for display only. Do not programmatically parse it.

ReferenceRoute

A supported reference route on the ComputeRoutesRequest.

Enums
REFERENCE_ROUTE_UNSPECIFIED Not used. Requests containing this value fail.
FUEL_EFFICIENT Fuel efficient route.

ComputeRoutesResponse

ComputeRoutes the response message.

Fields
routes[]

Route

Contains an array of computed routes (up to three) when you specify compute_alternatives_routes, and contains just one route when you don't. When this array contains multiple entries, the first one is the most recommended route. If the array is empty, then it means no route could be found.

fallback_info

FallbackInfo

In some cases when the server is not able to compute the route results with all of the input preferences, it may fallback to using a different way of computation. When fallback mode is used, this field contains detailed info about the fallback response. Otherwise this field is unset.

geocoding_results

GeocodingResults

Contains geocoding response info for waypoints specified as addresses.

FallbackInfo

Information related to how and why a fallback result was used. If this field is set, then it means the server used a different routing mode from your preferred mode as fallback.

Fields
routing_mode

FallbackRoutingMode

Routing mode used for the response. If fallback was triggered, the mode may be different from routing preference set in the original client request.

reason

FallbackReason

The reason why fallback response was used instead of the original response. This field is only populated when the fallback mode is triggered and the fallback response is returned.

FallbackReason

Reasons for using fallback response.

Enums
FALLBACK_REASON_UNSPECIFIED No fallback reason specified.
SERVER_ERROR A server error happened while calculating routes with your preferred routing mode, but we were able to return a result calculated by an alternative mode.
LATENCY_EXCEEDED We were not able to finish the calculation with your preferred routing mode on time, but we were able to return a result calculated by an alternative mode.

FallbackRoutingMode

Actual routing mode used for returned fallback response.

Enums
FALLBACK_ROUTING_MODE_UNSPECIFIED Not used.
FALLBACK_TRAFFIC_UNAWARE Indicates the TRAFFIC_UNAWARE RoutingPreference was used to compute the response.
FALLBACK_TRAFFIC_AWARE Indicates the TRAFFIC_AWARE RoutingPreference was used to compute the response.

GeocodedWaypoint

Details about the locations used as waypoints. Only populated for address waypoints. Includes details about the geocoding results for the purposes of determining what the address was geocoded to.

Fields
geocoder_status

Status

Indicates the status code resulting from the geocoding operation.

type[]

string

The type(s) of the result, in the form of zero or more type tags. Supported types: Address types and address component types.

partial_match

bool

Indicates that the geocoder did not return an exact match for the original request, though it was able to match part of the requested address. You may wish to examine the original request for misspellings and/or an incomplete address.

place_id

string

The place ID for this result.

intermediate_waypoint_request_index

int32

The index of the corresponding intermediate waypoint in the request. Only populated if the corresponding waypoint is an intermediate waypoint.

GeocodingResults

Contains GeocodedWaypoints for origin, destination and intermediate waypoints. Only populated for address waypoints.

Fields
origin

GeocodedWaypoint

Origin geocoded waypoint.

destination

GeocodedWaypoint

Destination geocoded waypoint.

intermediates[]

GeocodedWaypoint

A list of intermediate geocoded waypoints each containing an index field that corresponds to the zero-based position of the waypoint in the order they were specified in the request.

LocalizedTime

Localized description of time.

Fields
time

LocalizedText

The time specified as a string in a given time zone.

time_zone

string

Contains the time zone. The value is the name of the time zone as defined in the IANA Time Zone Database, e.g. "America/New_York".

Location

Encapsulates a location (a geographic point, and an optional heading).

Fields
lat_lng

LatLng

The waypoint's geographic coordinates.

heading

Int32Value

The compass heading associated with the direction of the flow of traffic. This value specifies the side of the road for pickup and drop-off. Heading values can be from 0 to 360, where 0 specifies a heading of due North, 90 specifies a heading of due East, and so on. You can use this field only for DRIVE and TWO_WHEELER RouteTravelMode.

Maneuver

A set of values that specify the navigation action to take for the current step (for example, turn left, merge, or straight).

Enums
MANEUVER_UNSPECIFIED Not used.
TURN_SLIGHT_LEFT Turn slightly to the left.
TURN_SHARP_LEFT Turn sharply to the left.
UTURN_LEFT Make a left u-turn.
TURN_LEFT Turn left.
TURN_SLIGHT_RIGHT Turn slightly to the right.
TURN_SHARP_RIGHT Turn sharply to the right.
UTURN_RIGHT Make a right u-turn.
TURN_RIGHT Turn right.
STRAIGHT Go straight.
RAMP_LEFT Take the left ramp.
RAMP_RIGHT Take the right ramp.
MERGE Merge into traffic.
FORK_LEFT Take the left fork.
FORK_RIGHT Take the right fork.
FERRY Take the ferry.
FERRY_TRAIN Take the train leading onto the ferry.
ROUNDABOUT_LEFT Turn left at the roundabout.
ROUNDABOUT_RIGHT Turn right at the roundabout.
DEPART Initial maneuver.
NAME_CHANGE Used to indicate a street name change.

Encapsulates navigation instructions for a RouteLegStep.

Fields
maneuver

Maneuver

Encapsulates the navigation instructions for the current step (for example, turn left, merge, or straight). This field determines which icon to display.

instructions

string

Instructions for navigating this step.

Polyline

Encapsulates an encoded polyline.

Fields
Union field polyline_type. Encapsulates the type of polyline. Defaults to encoded_polyline. polyline_type can be only one of the following:
encoded_polyline

string

The string encoding of the polyline using the polyline encoding algorithm

geo_json_linestring

Struct

Specifies a polyline using the GeoJSON LineString format.

PolylineEncoding

Specifies the preferred type of polyline to be returned.

Enums
POLYLINE_ENCODING_UNSPECIFIED No polyline type preference specified. Defaults to ENCODED_POLYLINE.
ENCODED_POLYLINE Specifies a polyline encoded using the polyline encoding algorithm.
GEO_JSON_LINESTRING Specifies a polyline using the GeoJSON LineString format

PolylineQuality

A set of values that specify the quality of the polyline.

Enums
POLYLINE_QUALITY_UNSPECIFIED No polyline quality preference specified. Defaults to OVERVIEW.
HIGH_QUALITY Specifies a high-quality polyline - which is composed using more points than OVERVIEW, at the cost of increased response size. Use this value when you need more precision.
OVERVIEW Specifies an overview polyline - which is composed using a small number of points. Use this value when displaying an overview of the route. Using this option has a lower request latency compared to using the HIGH_QUALITY option.

Route

Contains a route, which consists of a series of connected road segments that join beginning, ending, and intermediate waypoints.

Fields
route_labels[]

RouteLabel

Labels for the Route that are useful to identify specific properties of the route to compare against others.

legs[]

RouteLeg

A collection of legs (path segments between waypoints) that make up the route. Each leg corresponds to the trip between two non-via Waypoints. For example, a route with no intermediate waypoints has only one leg. A route that includes one non-via intermediate waypoint has two legs. A route that includes one via intermediate waypoint has one leg. The order of the legs matches the order of waypoints from origin to intermediates to destination.

distance_meters

int32

The travel distance of the route, in meters.

duration

Duration

The length of time needed to navigate the route. If you set the routing_preference to TRAFFIC_UNAWARE, then this value is the same as static_duration. If you set the routing_preference to either TRAFFIC_AWARE or TRAFFIC_AWARE_OPTIMAL, then this value is calculated taking traffic conditions into account.

static_duration

Duration

The duration of travel through the route without taking traffic conditions into consideration.

polyline

Polyline

The overall route polyline. This polyline is the combined polyline of all legs.

description

string

A description of the route.

warnings[]

string

An array of warnings to show when displaying the route.

viewport

Viewport

The viewport bounding box of the polyline.

travel_advisory

RouteTravelAdvisory

Additional information about the route.

optimized_intermediate_waypoint_index[]

int32

If you set optimize_waypoint_order to true, this field contains the optimized ordering of intermediate waypoints. Otherwise, this field is empty. For example, if you give an input of Origin: LA; Intermediate waypoints: Dallas, Bangor, Phoenix; Destination: New York; and the optimized intermediate waypoint order is Phoenix, Dallas, Bangor, then this field contains the values [2, 0, 1]. The index starts with 0 for the first intermediate waypoint provided in the input.

localized_values

RouteLocalizedValues

Text representations of properties of the Route.

route_token

string

An opaque token that can be passed to Navigation SDK to reconstruct the route during navigation, and, in the event of rerouting, honor the original intention when the route was created. Treat this token as an opaque blob. Don't compare its value across requests as its value may change even if the service returns the exact same route.

NOTE: Route.route_token is only available for requests that have set ComputeRoutesRequest.routing_preference to TRAFFIC_AWARE or TRAFFIC_AWARE_OPTIMAL. Route.route_token is not supported for requests that have Via waypoints.

RouteLocalizedValues

Text representations of certain properties.

Fields
distance

LocalizedText

Travel distance represented in text form.

duration

LocalizedText

Duration, represented in text form and localized to the region of the query. Takes traffic conditions into consideration. Note: If you did not request traffic information, this value is the same value as static_duration.

static_duration

LocalizedText

Duration without taking traffic conditions into consideration, represented in text form.

transit_fare

LocalizedText

Transit fare represented in text form.

RouteLabel

Labels for the Route that are useful to identify specific properties of the route to compare against others.

Enums
ROUTE_LABEL_UNSPECIFIED Default - not used.
DEFAULT_ROUTE The default "best" route returned for the route computation.
DEFAULT_ROUTE_ALTERNATE An alternative to the default "best" route. Routes like this will be returned when compute_alternative_routes is specified.
FUEL_EFFICIENT Fuel efficient route. Routes labeled with this value are determined to be optimized for Eco parameters such as fuel consumption.

RouteLeg

Contains a segment between non-via waypoints.

Fields
distance_meters

int32

The travel distance of the route leg, in meters.

duration

Duration

The length of time needed to navigate the leg. If the route_preference is set to TRAFFIC_UNAWARE, then this value is the same as static_duration. If the route_preference is either TRAFFIC_AWARE or TRAFFIC_AWARE_OPTIMAL, then this value is calculated taking traffic conditions into account.

static_duration

Duration

The duration of travel through the leg, calculated without taking traffic conditions into consideration.

polyline

Polyline

The overall polyline for this leg that includes each step's polyline.

start_location

Location

The start location of this leg. This location might be different from the provided origin. For example, when the provided origin is not near a road, this is a point on the road.

end_location

Location

The end location of this leg. This location might be different from the provided destination. For example, when the provided destination is not near a road, this is a point on the road.

steps[]

RouteLegStep

An array of steps denoting segments within this leg. Each step represents one navigation instruction.

travel_advisory

RouteLegTravelAdvisory

Contains the additional information that the user should be informed about, such as possible traffic zone restrictions, on a route leg.

localized_values

RouteLegLocalizedValues

Text representations of properties of the RouteLeg.

steps_overview

StepsOverview

Overview information about the steps in this RouteLeg. This field is only populated for TRANSIT routes.

RouteLegLocalizedValues

Text representations of certain properties.

Fields
distance

LocalizedText

Travel distance represented in text form.

duration

LocalizedText

Duration, represented in text form and localized to the region of the query. Takes traffic conditions into consideration. Note: If you did not request traffic information, this value is the same value as static_duration.

static_duration

LocalizedText

Duration without taking traffic conditions into consideration, represented in text form.

StepsOverview

Provides overview information about a list of RouteLegSteps.

Fields
multi_modal_segments[]

MultiModalSegment

Summarized information about different multi-modal segments of the RouteLeg.steps. This field is not populated if the RouteLeg does not contain any multi-modal segments in the steps.

MultiModalSegment

Provides summarized information about different multi-modal segments of the RouteLeg.steps. A multi-modal segment is defined as one or more contiguous RouteLegStep that have the same RouteTravelMode. This field is not populated if the RouteLeg does not contain any multi-modal segments in the steps.

Fields
navigation_instruction

NavigationInstruction

NavigationInstruction for the multi-modal segment.

travel_mode

RouteTravelMode

The travel mode of the multi-modal segment.

step_start_index

int32

The corresponding RouteLegStep index that is the start of a multi-modal segment.

step_end_index

int32

The corresponding RouteLegStep index that is the end of a multi-modal segment.

RouteLegStep

Contains a segment of a RouteLeg. A step corresponds to a single navigation instruction. Route legs are made up of steps.

Fields
distance_meters

int32

The travel distance of this step, in meters. In some circumstances, this field might not have a value.

static_duration

Duration

The duration of travel through this step without taking traffic conditions into consideration. In some circumstances, this field might not have a value.

polyline

Polyline

The polyline associated with this step.

start_location

Location

The start location of this step.

end_location

Location

The end location of this step.

navigation_instruction

NavigationInstruction

Navigation instructions.

travel_advisory

RouteLegStepTravelAdvisory

Contains the additional information that the user should be informed about, such as possible traffic zone restrictions, on a leg step.

localized_values

RouteLegStepLocalizedValues

Text representations of properties of the RouteLegStep.

transit_details

RouteLegStepTransitDetails

Details pertaining to this step if the travel mode is TRANSIT.

travel_mode

RouteTravelMode

The travel mode used for this step.

RouteLegStepLocalizedValues

Text representations of certain properties.

Fields
distance

LocalizedText

Travel distance represented in text form.

static_duration

LocalizedText

Duration without taking traffic conditions into consideration, represented in text form.

RouteLegStepTransitDetails

Additional information for the RouteLegStep related to TRANSIT routes.

Fields
stop_details

TransitStopDetails

Information about the arrival and departure stops for the step.

localized_values

TransitDetailsLocalizedValues

Text representations of properties of the RouteLegStepTransitDetails.

headsign

string

Specifies the direction in which to travel on this line as marked on the vehicle or at the departure stop. The direction is often the terminus station.

headway

Duration

Specifies the expected time as a duration between departures from the same stop at this time. For example, with a headway seconds value of 600, you would expect a ten minute wait if you should miss your bus.

transit_line

TransitLine

Information about the transit line used in this step.

stop_count

int32

The number of stops from the departure to the arrival stop. This count includes the arrival stop, but excludes the departure stop. For example, if your route leaves from Stop A, passes through stops B and C, and arrives at stop D,

stop_count

returns 3.

trip_short_text

string

The text that appears in schedules and sign boards to identify a transit trip to passengers. The text should uniquely identify a trip within a service day. For example, "538" is the trip_short_text of the Amtrak train that leaves San Jose, CA at 15:10 on weekdays to Sacramento, CA.

TransitDetailsLocalizedValues

Localized descriptions of values for RouteTransitDetails.

Fields
arrival_time

LocalizedTime

Time in its formatted text representation with a corresponding time zone.

departure_time

LocalizedTime

Time in its formatted text representation with a corresponding time zone.

TransitStopDetails

Details about the transit stops for the RouteLegStep.

Fields
arrival_stop

TransitStop

Information about the arrival stop for the step.

arrival_time

Timestamp

The estimated time of arrival for the step.

departure_stop

TransitStop

Information about the departure stop for the step.

departure_time

Timestamp

The estimated time of departure for the step.

RouteLegStepTravelAdvisory

Contains the additional information that the user should be informed about, such as possible traffic zone restrictions on a leg step.

Fields
speed_reading_intervals[]

SpeedReadingInterval

NOTE: This field is not currently populated.

RouteLegTravelAdvisory

Contains the additional information that the user should be informed about on a leg step, such as possible traffic zone restrictions.

Fields
toll_info

TollInfo

Contains information about tolls on the specific RouteLeg. This field is only populated if we expect there are tolls on the RouteLeg. If this field is set but the estimated_price subfield is not populated, we expect that road contains tolls but we do not know an estimated price. If this field does not exist, then there is no toll on the RouteLeg.

speed_reading_intervals[]

SpeedReadingInterval

Speed reading intervals detailing traffic density. Applicable in case of TRAFFIC_AWARE and TRAFFIC_AWARE_OPTIMAL routing preferences. The intervals cover the entire polyline of the RouteLeg without overlap. The start point of a specified interval is the same as the end point of the preceding interval.

Example:

polyline: A ---- B ---- C ---- D ---- E ---- F ---- G
speed_reading_intervals: [A,C), [C,D), [D,G).

RouteMatrixDestination

A single destination for ComputeRouteMatrixRequest

Fields
waypoint

Waypoint

Required. Destination waypoint

RouteMatrixElement

Contains route information computed for an origin/destination pair in the ComputeRouteMatrix API. This proto can be streamed to the client.

Fields
status

Status

Error status code for this element.

condition

RouteMatrixElementCondition

Indicates whether the route was found or not. Independent of status.

distance_meters

int32

The travel distance of the route, in meters.

duration

Duration

The length of time needed to navigate the route. If you set the routing_preference to TRAFFIC_UNAWARE, then this value is the same as static_duration. If you set the routing_preference to either TRAFFIC_AWARE or TRAFFIC_AWARE_OPTIMAL, then this value is calculated taking traffic conditions into account.

static_duration

Duration

The duration of traveling through the route without taking traffic conditions into consideration.

travel_advisory

RouteTravelAdvisory

Additional information about the route. For example: restriction information and toll information

fallback_info

FallbackInfo

In some cases when the server is not able to compute the route with the given preferences for this particular origin/destination pair, it may fall back to using a different mode of computation. When fallback mode is used, this field contains detailed information about the fallback response. Otherwise this field is unset.

localized_values

LocalizedValues

Text representations of properties of the RouteMatrixElement.

origin_index

int32

Zero-based index of the origin in the request.

destination_index

int32

Zero-based index of the destination in the request.

LocalizedValues

Text representations of certain properties.

Fields
distance

LocalizedText

Travel distance represented in text form.

duration

LocalizedText

Duration represented in text form taking traffic conditions into consideration. Note: If traffic information was not requested, this value is the same value as static_duration.

static_duration

LocalizedText

Duration represented in text form without taking traffic conditions into consideration.

transit_fare

LocalizedText

Transit fare represented in text form.

RouteMatrixElementCondition

The condition of the route being returned.

Enums
ROUTE_MATRIX_ELEMENT_CONDITION_UNSPECIFIED Only used when the status of the element is not OK.
ROUTE_EXISTS A route was found, and the corresponding information was filled out for the element.
ROUTE_NOT_FOUND No route could be found. Fields containing route information, such as distance_meters or duration, will not be filled out in the element.

RouteMatrixOrigin

A single origin for ComputeRouteMatrixRequest

Fields
waypoint

Waypoint

Required. Origin waypoint

route_modifiers

RouteModifiers

Optional. Modifiers for every route that takes this as the origin

RouteModifiers

Encapsulates a set of optional conditions to satisfy when calculating the routes.

Fields
avoid_tolls

bool

When set to true, avoids toll roads where reasonable, giving preference to routes not containing toll roads. Applies only to the DRIVE and TWO_WHEELER RouteTravelMode.

avoid_highways

bool

When set to true, avoids highways where reasonable, giving preference to routes not containing highways. Applies only to the DRIVE and TWO_WHEELER RouteTravelMode.

avoid_ferries

bool

When set to true, avoids ferries where reasonable, giving preference to routes not containing ferries. Applies only to the DRIVE andTWO_WHEELER RouteTravelMode.

avoid_indoor

bool

When set to true, avoids navigating indoors where reasonable, giving preference to routes not containing indoor navigation. Applies only to the WALK RouteTravelMode.

vehicle_info

VehicleInfo

Specifies the vehicle information.

toll_passes[]

TollPass

Encapsulates information about toll passes. If toll passes are provided, the API tries to return the pass price. If toll passes are not provided, the API treats the toll pass as unknown and tries to return the cash price. Applies only to the DRIVE and TWO_WHEELER RouteTravelMode.

RouteTravelAdvisory

Contains the additional information that the user should be informed about, such as possible traffic zone restrictions.

Fields
toll_info

TollInfo

Contains information about tolls on the route. This field is only populated if tolls are expected on the route. If this field is set, but the estimatedPrice subfield is not populated, then the route contains tolls, but the estimated price is unknown. If this field is not set, then there are no tolls expected on the route.

speed_reading_intervals[]

SpeedReadingInterval

Speed reading intervals detailing traffic density. Applicable in case of TRAFFIC_AWARE and TRAFFIC_AWARE_OPTIMAL routing preferences. The intervals cover the entire polyline of the route without overlap. The start point of a specified interval is the same as the end point of the preceding interval.

Example:

polyline: A ---- B ---- C ---- D ---- E ---- F ---- G
speed_reading_intervals: [A,C), [C,D), [D,G).
fuel_consumption_microliters

int64

The predicted fuel consumption in microliters.

route_restrictions_partially_ignored

bool

Returned route may have restrictions that are not suitable for requested travel mode or route modifiers.

transit_fare

Money

If present, contains the total fare or ticket costs on this route This property is only returned for TRANSIT requests and only for routes where fare information is available for all transit steps.

RouteTravelMode

A set of values used to specify the mode of travel. NOTE: WALK, BICYCLE, and TWO_WHEELER routes are in beta and might sometimes be missing clear sidewalks, pedestrian paths, or bicycling paths. You must display this warning to the user for all walking, bicycling, and two-wheel routes that you display in your app.

Enums
TRAVEL_MODE_UNSPECIFIED No travel mode specified. Defaults to DRIVE.
DRIVE Travel by passenger car.
BICYCLE Travel by bicycle.
WALK Travel by walking.
TWO_WHEELER Two-wheeled, motorized vehicle. For example, motorcycle. Note that this differs from the BICYCLE travel mode which covers human-powered mode.
TRANSIT Travel by public transit routes, where available.

RoutingPreference

A set of values that specify factors to take into consideration when calculating the route.

Enums
ROUTING_PREFERENCE_UNSPECIFIED No routing preference specified. Default to TRAFFIC_UNAWARE.
TRAFFIC_UNAWARE Computes routes without taking live traffic conditions into consideration. Suitable when traffic conditions don't matter or are not applicable. Using this value produces the lowest latency. Note: For RouteTravelMode DRIVE and TWO_WHEELER, the route and duration chosen are based on road network and average time-independent traffic conditions, not current road conditions. Consequently, routes may include roads that are temporarily closed. Results for a given request may vary over time due to changes in the road network, updated average traffic conditions, and the distributed nature of the service. Results may also vary between nearly-equivalent routes at any time or frequency.
TRAFFIC_AWARE Calculates routes taking live traffic conditions into consideration. In contrast to TRAFFIC_AWARE_OPTIMAL, some optimizations are applied to significantly reduce latency.
TRAFFIC_AWARE_OPTIMAL Calculates the routes taking live traffic conditions into consideration, without applying most performance optimizations. Using this value produces the highest latency.

SpeedReadingInterval

Traffic density indicator on a contiguous segment of a polyline or path. Given a path with points P_0, P_1, ... , P_N (zero-based index), the SpeedReadingInterval defines an interval and describes its traffic using the following categories.

Fields
start_polyline_point_index

int32

The starting index of this interval in the polyline.

end_polyline_point_index

int32

The ending index of this interval in the polyline.

Union field speed_type.

speed_type can be only one of the following:

speed

Speed

Traffic speed in this interval.

Speed

The classification of polyline speed based on traffic data.

Enums
SPEED_UNSPECIFIED Default value. This value is unused.
NORMAL Normal speed, no slowdown is detected.
SLOW Slowdown detected, but no traffic jam formed.
TRAFFIC_JAM Traffic jam detected.

TollInfo

Encapsulates toll information on a Route or on a RouteLeg.

Fields
estimated_price[]

Money

The monetary amount of tolls for the corresponding Route or RouteLeg. This list contains a money amount for each currency that is expected to be charged by the toll stations. Typically this list will contain only one item for routes with tolls in one currency. For international trips, this list may contain multiple items to reflect tolls in different currencies.

TollPass

List of toll passes around the world that we support.

Enums
TOLL_PASS_UNSPECIFIED Not used. If this value is used, then the request fails.
AU_ETOLL_TAG Sydney toll pass. See additional details at https://www.myetoll.com.au.
AU_EWAY_TAG Sydney toll pass. See additional details at https://www.tollpay.com.au.
AU_LINKT Australia-wide toll pass. See additional details at https://www.linkt.com.au/.
AR_TELEPASE Argentina toll pass. See additional details at https://telepase.com.ar
BR_AUTO_EXPRESO Brazil toll pass. See additional details at https://www.autoexpreso.com
BR_CONECTCAR Brazil toll pass. See additional details at https://conectcar.com.
BR_MOVE_MAIS Brazil toll pass. See additional details at https://movemais.com.
BR_PASSA_RAPIDO Brazil toll pass. See additional details at https://pasorapido.gob.do/
BR_SEM_PARAR Brazil toll pass. See additional details at https://www.semparar.com.br.
BR_TAGGY Brazil toll pass. See additional details at https://taggy.com.br.
BR_VELOE Brazil toll pass. See additional details at https://veloe.com.br/site/onde-usar.
CA_US_AKWASASNE_SEAWAY_CORPORATE_CARD Canada to United States border crossing.
CA_US_AKWASASNE_SEAWAY_TRANSIT_CARD Canada to United States border crossing.
CA_US_BLUE_WATER_EDGE_PASS Ontario, Canada to Michigan, United States border crossing.
CA_US_CONNEXION Ontario, Canada to Michigan, United States border crossing.
CA_US_NEXUS_CARD Canada to United States border crossing.
ID_E_TOLL Indonesia. E-card provided by multiple banks used to pay for tolls. All e-cards via banks are charged the same so only one enum value is needed. E.g. - Bank Mandiri https://www.bankmandiri.co.id/e-money - BCA https://www.bca.co.id/flazz - BNI https://www.bni.co.id/id-id/ebanking/tapcash
IN_FASTAG India.
IN_LOCAL_HP_PLATE_EXEMPT India, HP state plate exemption.
JP_ETC Japan ETC. Electronic wireless system to collect tolls. https://www.go-etc.jp/
JP_ETC2 Japan ETC2.0. New version of ETC with further discount and bidirectional communication between devices on vehicles and antennas on the road. https://www.go-etc.jp/etc2/index.html
MX_IAVE Mexico toll pass. https://iave.capufe.gob.mx/#/
MX_PASE Mexico https://www.pase.com.mx
MX_QUICKPASS Mexico https://operadoravial.com/quick-pass/
MX_SISTEMA_TELEPEAJE_CHIHUAHUA http://appsh.chihuahua.gob.mx/transparencia/?doc=/ingresos/TelepeajeFormato4.pdf
MX_TAG_IAVE Mexico
MX_TAG_TELEVIA Mexico toll pass company. One of many operating in Mexico City. See additional details at https://www.televia.com.mx.
MX_TELEVIA Mexico toll pass company. One of many operating in Mexico City. https://www.televia.com.mx
MX_VIAPASS Mexico toll pass. See additional details at https://www.viapass.com.mx/viapass/web_home.aspx.
US_AL_FREEDOM_PASS AL, USA.
US_AK_ANTON_ANDERSON_TUNNEL_BOOK_OF_10_TICKETS AK, USA.
US_CA_FASTRAK CA, USA.
US_CA_FASTRAK_CAV_STICKER Indicates driver has any FasTrak pass in addition to the DMV issued Clean Air Vehicle (CAV) sticker. https://www.bayareafastrak.org/en/guide/doINeedFlex.shtml
US_CO_EXPRESSTOLL CO, USA.
US_CO_GO_PASS CO, USA.
US_DE_EZPASSDE DE, USA.
US_FL_BOB_SIKES_TOLL_BRIDGE_PASS FL, USA.
US_FL_DUNES_COMMUNITY_DEVELOPMENT_DISTRICT_EXPRESSCARD FL, USA.
US_FL_EPASS FL, USA.
US_FL_GIBA_TOLL_PASS FL, USA.
US_FL_LEEWAY FL, USA.
US_FL_SUNPASS FL, USA.
US_FL_SUNPASS_PRO FL, USA.
US_IL_EZPASSIL IL, USA.
US_IL_IPASS IL, USA.
US_IN_EZPASSIN IN, USA.
US_KS_BESTPASS_HORIZON KS, USA.
US_KS_KTAG KS, USA.
US_KS_NATIONALPASS KS, USA.
US_KS_PREPASS_ELITEPASS KS, USA.
US_LA_GEAUXPASS LA, USA.
US_LA_TOLL_TAG LA, USA.
US_MA_EZPASSMA MA, USA.
US_MD_EZPASSMD MD, USA.
US_ME_EZPASSME ME, USA.
US_MI_AMBASSADOR_BRIDGE_PREMIER_COMMUTER_CARD MI, USA.
US_MI_BCPASS MI, USA.
US_MI_GROSSE_ILE_TOLL_BRIDGE_PASS_TAG MI, USA.
US_MI_IQ_PROX_CARD

MI, USA. Deprecated as this pass type no longer exists.

US_MI_IQ_TAG MI, USA.
US_MI_MACKINAC_BRIDGE_MAC_PASS MI, USA.
US_MI_NEXPRESS_TOLL MI, USA.
US_MN_EZPASSMN MN, USA.
US_NC_EZPASSNC NC, USA.
US_NC_PEACH_PASS NC, USA.
US_NC_QUICK_PASS NC, USA.
US_NH_EZPASSNH NH, USA.
US_NJ_DOWNBEACH_EXPRESS_PASS NJ, USA.
US_NJ_EZPASSNJ NJ, USA.
US_NY_EXPRESSPASS NY, USA.
US_NY_EZPASSNY NY, USA.
US_OH_EZPASSOH OH, USA.
US_PA_EZPASSPA PA, USA.
US_RI_EZPASSRI RI, USA.
US_SC_PALPASS SC, USA.
US_TX_AVI_TAG TX, USA.
US_TX_BANCPASS TX, USA.
US_TX_DEL_RIO_PASS TX, USA.
US_TX_EFAST_PASS TX, USA.
US_TX_EAGLE_PASS_EXPRESS_CARD TX, USA.
US_TX_EPTOLL TX, USA.
US_TX_EZ_CROSS TX, USA.
US_TX_EZTAG TX, USA.
US_TX_FUEGO_TAG TX, USA.
US_TX_LAREDO_TRADE_TAG TX, USA.
US_TX_PLUSPASS TX, USA.
US_TX_TOLLTAG TX, USA.
US_TX_TXTAG TX, USA.
US_TX_XPRESS_CARD TX, USA.
US_UT_ADAMS_AVE_PARKWAY_EXPRESSCARD UT, USA.
US_VA_EZPASSVA VA, USA.
US_WA_BREEZEBY WA, USA.
US_WA_GOOD_TO_GO WA, USA.
US_WV_EZPASSWV WV, USA.
US_WV_MEMORIAL_BRIDGE_TICKETS WV, USA.
US_WV_MOV_PASS WV, USA
US_WV_NEWELL_TOLL_BRIDGE_TICKET WV, USA.

TrafficModel

Specifies the assumptions to use when calculating time in traffic. This setting affects the value returned in the duration field in the response, which contains the predicted time in traffic based on historical averages.

Enums
TRAFFIC_MODEL_UNSPECIFIED Unused. If specified, will default to BEST_GUESS.
BEST_GUESS Indicates that the returned duration should be the best estimate of travel time given what is known about both historical traffic conditions and live traffic. Live traffic becomes more important the closer the departure_time is to now.
PESSIMISTIC Indicates that the returned duration should be longer than the actual travel time on most days, though occasional days with particularly bad traffic conditions may exceed this value.
OPTIMISTIC Indicates that the returned duration should be shorter than the actual travel time on most days, though occasional days with particularly good traffic conditions may be faster than this value.

TransitAgency

A transit agency that operates a transit line.

Fields
name

string

The name of this transit agency.

phone_number

string

The transit agency's locale-specific formatted phone number.

uri

string

The transit agency's URI.

TransitLine

Contains information about the transit line used in this step.

Fields
agencies[]

TransitAgency

The transit agency (or agencies) that operates this transit line.

name

string

The full name of this transit line, For example, "8 Avenue Local".

uri

string

the URI for this transit line as provided by the transit agency.

color

string

The color commonly used in signage for this line. Represented in hexadecimal.

icon_uri

string

The URI for the icon associated with this line.

name_short

string

The short name of this transit line. This name will normally be a line number, such as "M7" or "355".

text_color

string

The color commonly used in text on signage for this line. Represented in hexadecimal.

vehicle

TransitVehicle

The type of vehicle that operates on this transit line.

TransitPreferences

Preferences for TRANSIT based routes that influence the route that is returned.

Fields
allowed_travel_modes[]

TransitTravelMode

A set of travel modes to use when getting a TRANSIT route. Defaults to all supported modes of travel.

routing_preference

TransitRoutingPreference

A routing preference that, when specified, influences the TRANSIT route returned.

TransitRoutingPreference

Specifies routing preferences for transit routes.

Enums
TRANSIT_ROUTING_PREFERENCE_UNSPECIFIED No preference specified.
LESS_WALKING Indicates that the calculated route should prefer limited amounts of walking.
FEWER_TRANSFERS Indicates that the calculated route should prefer a limited number of transfers.

TransitTravelMode

A set of values used to specify the mode of transit.

Enums
TRANSIT_TRAVEL_MODE_UNSPECIFIED No transit travel mode specified.
BUS Travel by bus.
SUBWAY Travel by subway.
TRAIN Travel by train.
LIGHT_RAIL Travel by light rail or tram.
RAIL Travel by rail. This is equivalent to a combination of SUBWAY, TRAIN, and LIGHT_RAIL.

TransitStop

Information about a transit stop.

Fields
name

string

The name of the transit stop.

location

Location

The location of the stop expressed in latitude/longitude coordinates.

TransitVehicle

Information about a vehicle used in transit routes.

Fields
name

LocalizedText

The name of this vehicle, capitalized.

type

TransitVehicleType

The type of vehicle used.

icon_uri

string

The URI for an icon associated with this vehicle type.

local_icon_uri

string

The URI for the icon associated with this vehicle type, based on the local transport signage.

TransitVehicleType

The type of vehicles for transit routes.

Enums
TRANSIT_VEHICLE_TYPE_UNSPECIFIED Unused.
BUS Bus.
CABLE_CAR A vehicle that operates on a cable, usually on the ground. Aerial cable cars may be of the type GONDOLA_LIFT.
COMMUTER_TRAIN Commuter rail.
FERRY Ferry.
FUNICULAR A vehicle that is pulled up a steep incline by a cable. A Funicular typically consists of two cars, with each car acting as a counterweight for the other.
GONDOLA_LIFT An aerial cable car.
HEAVY_RAIL Heavy rail.
HIGH_SPEED_TRAIN High speed train.
INTERCITY_BUS Intercity bus.
LONG_DISTANCE_TRAIN Long distance train.
METRO_RAIL Light rail transit.
MONORAIL Monorail.
OTHER All other vehicles.
RAIL Rail.
SHARE_TAXI Share taxi is a kind of bus with the ability to drop off and pick up passengers anywhere on its route.
SUBWAY Underground light rail.
TRAM Above ground light rail.
TROLLEYBUS Trolleybus.

Units

A set of values that specify the unit of measure used in the display.

Enums
UNITS_UNSPECIFIED Units of measure not specified. Defaults to the unit of measure inferred from the request.
METRIC Metric units of measure.
IMPERIAL Imperial (English) units of measure.

VehicleEmissionType

A set of values describing the vehicle's emission type. Applies only to the DRIVE RouteTravelMode.

Enums
VEHICLE_EMISSION_TYPE_UNSPECIFIED No emission type specified. Default to GASOLINE.
GASOLINE Gasoline/petrol fueled vehicle.
ELECTRIC Electricity powered vehicle.
HYBRID Hybrid fuel (such as gasoline + electric) vehicle.
DIESEL Diesel fueled vehicle.

VehicleInfo

Contains the vehicle information, such as the vehicle emission type.

Fields
emission_type

VehicleEmissionType

Describes the vehicle's emission type. Applies only to the DRIVE RouteTravelMode.

Waypoint

Encapsulates a waypoint. Waypoints mark both the beginning and end of a route, and include intermediate stops along the route.

Fields
via

bool

Marks this waypoint as a milestone rather a stopping point. For each non-via waypoint in the request, the response appends an entry to the legs array to provide the details for stopovers on that leg of the trip. Set this value to true when you want the route to pass through this waypoint without stopping over. Via waypoints don't cause an entry to be added to the legs array, but they do route the journey through the waypoint. You can only set this value on waypoints that are intermediates. The request fails if you set this field on terminal waypoints. If ComputeRoutesRequest.optimize_waypoint_order is set to true then this field cannot be set to true; otherwise, the request fails.

vehicle_stopover

bool

Indicates that the waypoint is meant for vehicles to stop at, where the intention is to either pickup or drop-off. When you set this value, the calculated route won't include non-via waypoints on roads that are unsuitable for pickup and drop-off. This option works only for DRIVE and TWO_WHEELER travel modes, and when the location_type is Location.

side_of_road

bool

Indicates that the location of this waypoint is meant to have a preference for the vehicle to stop at a particular side of road. When you set this value, the route will pass through the location so that the vehicle can stop at the side of road that the location is biased towards from the center of the road. This option works only for DRIVE and TWO_WHEELER RouteTravelMode.

Union field location_type. Different ways to represent a location. location_type can be only one of the following:
location

Location

A point specified using geographic coordinates, including an optional heading.

place_id

string

The POI Place ID associated with the waypoint.

address

string

Human readable address or a plus code. See https://plus.codes for details.