যদি আপনি একটি ফিড স্ট্যাটাস ত্রুটি বার্তা পেয়ে থাকেন, তাহলে আপনার ত্রুটি বার্তা এবং তার সমাধান খুঁজে পেতে নিম্নলিখিত লিঙ্কগুলি ব্যবহার করুন।
| আপনার ত্রুটি বার্তাটি খুঁজুন | |||
|---|---|---|---|
| 1001-1050 | 1051-1100 | 1101-2000 | 3001-4000 |
| 6001-7000 | 7001-8000 | 8001-8100 | 8101-8204 |
| 10001-11000 | 11001-11015 |
| কোড | বার্তা | বিবরণ |
|---|---|---|
| 1001 | Can't understand format on timestamp | প্রদত্ত টাইমস্ট্যাম্পটি তারিখ/সময় বিন্যাস অনুসরণকারী টাইমস্ট্যাম্প দিয়ে প্রতিস্থাপন করুন। |
| 1002 | Can't understand Currency in Tax conversion | একটি বৈধ তিন-অক্ষরের মুদ্রা কোড যোগ করুন, যেমন EUR বা USD। |
| 1003 | Can't understand Currency in OtherFees conversion | একটি বৈধ তিন-অক্ষরের মুদ্রা কোড যোগ করুন, যেমন EUR অথবা USD । |
| 1005 | Invalid Baserate, Tax, or OtherFees | নিশ্চিত করুন যে <Baserate> , <Tax> , এবং <OtherFees> এর মানগুলি ঐ ক্ষেত্রগুলির জন্য বৈধ। |
| 1006 | An all_inclusive rate is specified, but Tax is also provided | all_inclusive ভ্রমণপথে <Tax> এবং <OtherFees> অন্তর্ভুক্ত করা উচিত নয়। |
| 1007 | Result tag is used in the wrong context | <Result> ট্যাগটি শুধুমাত্র <Transaction> এর একটি তাৎক্ষণিক শিশু হিসেবে স্থাপন করা যেতে পারে। |
| 1008 | RoomID tag is used in the wrong context | নিশ্চিত করুন যে <RoomID> ট্যাগটি শুধুমাত্র <PackageData> অথবা <RoomBundle> এর সাথে ব্যবহার করা হচ্ছে। |
| 1009 | PackageID tag is used in the wrong context | নিশ্চিত করুন যে <PackageID> শুধুমাত্র <PackageData> অথবা <RoomBundle> এর সাথে ব্যবহার করা হচ্ছে। |
| 1010 | RatePlanID is used in the wrong context | <RatePlanID> শুধুমাত্র একটি <RoomBundle> এ বৈধ। |
| 1011 | Occupancy must be > 1 in the base rate for a Result | <Result> এর জন্য বেস রেটে <Occupancy> মান ১ অনুমোদিত নয়। অনুগ্রহ করে বেস রেটের জন্য একটি অকুপেন্সি > ১ উল্লেখ করুন। |
| 1012 | Capacity or Occupancy is over the maximum limit | ডেটা ত্রুটি প্রতিরোধ করার জন্য, <Capacity> এবং <Occupancy> উভয়ের মান ২০ বা তার কমের মধ্যে সীমাবদ্ধ। নিশ্চিত করুন যে আপনার <Capacity> এবং <Occupancy> এন্ট্রিগুলি সেই সীমার মধ্যে রয়েছে। |
| 1013 | The text value for Capacity or Occupancy can't be understood as an integer | মানটি পূর্ণসংখ্যায় পরিবর্তন করুন। |
| 1014 | Value can't be understood as a Boolean | এই গৃহীত মানগুলির মধ্যে একটি দিয়ে প্রতিস্থাপন করুন: 0, 1, সত্য, মিথ্যা। |
| 1015 | Text entered for a tag that doesn't allow text | এন্ট্রিটি একটি উপযুক্ত নন-টেক্সট এলিমেন্ট দিয়ে প্রতিস্থাপন করুন। |
| 1016 | Can't understand context for a Text element | একটি <Text> উপাদান অনুপযুক্ত প্রসঙ্গে ব্যবহার করা হয়েছে, এবং তাই এটি উপেক্ষা করা হয়েছে। এই উপাদানটি সংশোধন করুন অথবা এটিকে উপযুক্ত প্রসঙ্গে স্থানান্তর করুন। |
| 1018 | Value for Refundable days is over the maximum limit | কম মান লিখুন। অথবা, যদি প্রকৃত মান সীমার চেয়ে বেশি হয়, তাহলে এই ঘরটিকে ফেরতযোগ্য নয় বলে কোড করুন। |
| 1019 | Value for Refundable days can't be understood | মানটি পূর্ণসংখ্যায় পরিবর্তন করুন। |
| 1020 | Value can't be understood as a time | HH:MM ফর্ম্যাটে সঠিক ঘন্টা এবং মিনিট লিখুন। |
| 1021 | The given attribute value is not valid for its intended element | প্রদত্ত অ্যাট্রিবিউট মান এই উপাদানের জন্য বৈধ নয়। XML উপাদান থেকে এই অ্যাট্রিবিউটটি সরান অথবা একটি ভিন্ন বৈধ অ্যাট্রিবিউট মান ব্যবহার করুন। |
| 1022 | Can't find a match for the given partner and hotel ID | আপনার হোটেল ফিডে হোটেল আইডি আছে কিনা এবং সম্পত্তিটি গুগল ম্যাপস বৈশিষ্ট্যের সাথে মিলেছে কিনা তা নিশ্চিত করুন। |
| 1023 | Partner name isn't recognized | এটি Google-এর অভ্যন্তরীণ ত্রুটির কারণে হতে পারে। ট্রান্সমিশনটি আবার চেষ্টা করুন। যদি তা ব্যর্থ হয়, তাহলে Google সহায়তার সাথে যোগাযোগ করুন। |
| 1024 | Can't find a matched Google hotel ID for the given partner and hotel ID | এই প্রদত্ত পার্টনার এবং হোটেল আইডি থেকে গুগল হোটেল আইডির সাথে কোনও ম্যাপিং গুগলের নেই। এটি গুগলের প্রক্রিয়াকরণে বিলম্বের কারণে হতে পারে অথবা ডেটা মেলাতে না পারার কারণে হতে পারে। অতিরিক্ত সহায়তার প্রয়োজন হলে গুগলের সাথে যোগাযোগ করুন। |
| 1025 | RoomID string is empty | একটি বৈধ <RoomBundle> ঘোষণা করতে, প্রতিটি <RoomData> একটি <RoomID> থাকতে হবে। |
| 1026 | PackageID string is empty | <RoomBundle> থেকে অ্যাক্সেস করার জন্য, প্রতিটি <PackageData> একটি <PackageID> থাকতে হবে। |
| 1027 | Nesting data error: PartnerData, PropertyData, RoomData, and PackageData shouldn't be nested within each other | XML স্কিমা পরীক্ষা করুন এবং নেস্টিং ত্রুটিগুলি ঠিক করুন। |
| 1028 | The CheckInDate can't be understood | <CheckInDate> . YYYY-MM-DD ফর্ম্যাটে লিখুন। |
| 1029 | The CheckInDate is out of range | নিশ্চিত করুন যে সমস্ত <CheckInDate> . মান ভবিষ্যতের, অতীতের নয়। |
| 1030 | LengthOfStay value is over the maximum limit | <LengthOfStay> এর সর্বোচ্চ সীমা ৩০ দিন। আপনার ডেটা এমনভাবে সম্পাদনা করুন যাতে <LengthOfStay> ৩০ দিন বা তার কম হয়। |
| 1031 | Unable to find a matched Google hotel ID for the given partner and hotel ID | এই প্রদত্ত পার্টনার এবং হোটেল আইডি থেকে গুগল হোটেল আইডির সাথে কোনও ম্যাপিং গুগলের নেই। এটি গুগলের প্রক্রিয়াকরণে বিলম্বের কারণে হতে পারে অথবা গুগল ডেটা মেলাতে অক্ষম হলে হতে পারে। অতিরিক্ত সহায়তার প্রয়োজন হলে গুগল সহায়তার সাথে যোগাযোগ করুন। |
| 1033 | Multiple results with the same key: the existing partner hotel ID and the new partner hotel ID | XML প্রতিক্রিয়াতে একই <Property> এবং ভ্রমণপথ সহ একাধিক ফলাফল থাকতে পারে না। |
| 1034 | The XML response can't contain multiple results with the same Property and itinerary | ডেটা ত্রুটি প্রতিরোধ করার জন্য, <RoomBundle> <Baserate> মানগুলি খালি, ঋণাত্মক বা সর্বোচ্চ রাতের মূল্য USD 20,000 এর বেশি হতে পারে না। <RoomBundle> <Baserate> মানগুলিতে বুঝতে পারছি না বা মুদ্রা খালি থাকতে পারে না। |
| 1036 | No RoomBundle Baserate matched the Baserate for the given Result. Room rates weren't stored | নিশ্চিত করুন যে BaseRate-এর জন্য একটি <RoomBundle> বিদ্যমান। এই ত্রুটিগুলির মধ্যে একটি বা একাধিক ঘটেছে: অবৈধ <Baserate> মুদ্রা, কোন <Baserate> , অবৈধ <DetailedTax> . মুদ্রা, অথবা অবৈধ <DetailedFee> . মুদ্রা। |
| 1037 | A RoomBundle matched the Baserate for the given Result, but not the Tax. Room rates weren't stored | নিশ্চিত করুন যে প্রতিটি <Result> এ একটি <Baserate> আছে যার একটি <Tax> আছে যা <RoomBundle> এর যেকোনো একটির সাথে মেলে। |
| 1038 | One or more RoomBundle values matched the Baserate and Tax, but not the OtherFees of the hotel price. Bundles weren't stored | নিশ্চিত করুন যে প্রতিটি <Result> এ <Baserate> সহ <OtherFees> আছে যা <RoomBundle> এর যেকোনো একটির সাথে মেলে। |
| 1039 | Closest RoomBundle did not match the currency of the Result | প্রতিটি <Result> এবং এর সাথে মিলে যাওয়া <RoomBundle> এর জন্য একই মুদ্রা ব্যবহার করা হয়েছে তা নিশ্চিত করুন। |
| 1040 | Closest RoomBundle did not match the Result eligibility | নিশ্চিত করুন যে প্রতিটি <Result> একটি <Baserate> আছে, যার মধ্যে প্রয়োজন অনুসারে <Tax> এবং <OtherFees> অন্তর্ভুক্ত রয়েছে। প্রতিটি <Baserate> কে অবশ্যই একটি <RoomBundle> সাথে মিলতে হবে। |
| 1041 | Can't understand Currency given for a hotel ID | একটি বৈধ তিন-অক্ষরের মুদ্রা কোড যোগ করুন, যেমন EUR বা USD। |
| 1042 | Can't understand payment type | ChargeCurrency-এর জন্য প্রদত্ত টেক্সট মান বোঝা যায়নি। |
| 1043 | Can't understand string for Tax or OtherFees | <Tax> অথবা <OtherFees> একটি সংখ্যাসূচক ফ্লোট মান হিসেবে পুনরায় ফর্ম্যাট করুন, যেমন 123 বা 12.34। |
| 1045 | Unexpected first element | প্রথম উপাদানটি হতে হবে <Transaction> । ফাইল স্কিমা সংশোধন করুন। |
| 1047 | Missing or incomplete RoomID or PackageID | অবৈধ <RoomID> অথবা <PackageID> । দাম পাঠানোর আগে মেটাডেটাতে <RoomID> অথবা <PackageID> সংজ্ঞায়িত করুন। |
| 1048 | Can't find PointOfSale ID | এই <PointOfSale> . অ্যাট্রিবিউটের আইডি মানটি নির্ধারিত ল্যান্ডিং পৃষ্ঠাগুলির সেটে পাওয়া যায়নি। একটি অতিরিক্ত <PointOfSale> . নির্ধারণ করুন অথবা আপনার মূল্য ফিডে আইডিটি সংশোধন করুন। |
| 1049 | Fetch failed due to an external error | দাম আনা যায়নি। আরও বিস্তারিত জানার জন্য আপনার সার্ভার লগগুলি পরীক্ষা করুন। |
| 1050 | Rate with duplicate RatePlanID | <Rate> . ডুপ্লিকেট <RatePlanID> সহ সংরক্ষণ করা হয়নি। প্রতিটি <Result> মধ্যে অনন্য বা খালি <RatePlanID> সেট করুন। |
| কোড | বার্তা | বিবরণ |
| 1051 | Invalid duplication with key, hotel ID, and new partner hotel ID | ম্যাপ ওভারল্যাপের কারণে হোটেলের দাম কমে গেছে। আপনার ফিডে হোটেলগুলি সংশোধন করতে ম্যানুয়াল ম্যাচ ব্যবহার করুন। |
| 1053 | Invalid Rates tag placement | <Rates> ট্যাগ স্থাপন অবৈধ। <Rates> ট্যাগটি শুধুমাত্র <Result> এবং <RoomBundle> এর একটি তাৎক্ষণিক শিশু হিসেবে নির্দিষ্ট করা যেতে পারে। |
| 1054 | Invalid Rates tag placement | <Rate> ট্যাগ বসানো অবৈধ। <Rate> ট্যাগটি শুধুমাত্র <Rates> ভিতরে নির্দিষ্ট করা যেতে পারে। |
| 1056 | Rate with duplicate rate_rule_id | ডুপ্লিকেট rate_rule_id সহ <Rate> . সংরক্ষণ করা হয়নি। নিশ্চিত করুন যে প্রতিটি <Rate> . যেকোনো <RoomBundle> অথবা <Result> তে শুধুমাত্র একবারই ঘটে। |
| 1058 | XML can't be understood | XML বোঝা যাচ্ছে না। XML পরীক্ষা করে দেখুন যে এটি xmllint অথবা সমতুল্য বৈধতা পরীক্ষক পাস করেছে কিনা। |
| 1061 | Itinerary not requested | ভ্রমণপথের অনুরোধ করা হয়নি। শুধুমাত্র Google এর অনুরোধ করা ভ্রমণপথের উত্তর দিন। |
| 1062 | Nights either not specified or not greater than zero | <Nights> অবশ্যই শূন্যের চেয়ে বড় সংখ্যা হতে হবে। <Result> এ একটি বৈধ <Nights> মান সরবরাহ করুন। |
| 1063 | Can't find a matching Google hotel ID for partner and partner hotel ID | গুগল গুগল আইডি এবং পার্টনার আইডির মধ্যে একটি ম্যাপিং বজায় রাখে। এই ক্ষেত্রে, একটি গুগল আইডির জন্য একাধিক পার্টনার আইডি থাকে। গুগল একটিকে প্রাথমিক হিসেবে বেছে নেয়। অন্যগুলি রেকর্ড করা হবে না। দুটি বৈশিষ্ট্য সত্যিই অনন্য এবং আইডি ড্রিফট নয় তা নিশ্চিত করার পরে, আইডিগুলি আলাদা করতে গুগল সহায়তার সাথে যোগাযোগ করুন। |
| 1064 | RoomId in the RoomBundle is not equal to the RoomId found in RoomData | যদি <RoomBundle> এবং একটি ইনলাইন <RoomData> উভয়ের অধীনে একটি <RoomID> প্রদান করা হয়, তাহলে দুটি মান অবশ্যই মিলবে। |
| 1065 | Invalid context for Name, Description or PhotoURL | <Name> , <Description> এবং <PhotoURL> এলিমেন্টগুলো <RoomData> এ রাখতে হবে, <RoomBundle> এ নয়। ঠিক করার জন্য, এই এলিমেন্টগুলো দিয়ে একটি <RoomData> তৈরি করুন। সম্ভব হলে, প্রতিটি ভ্রমণপথ থেকে স্বাধীনভাবে এটি পাঠান এবং শুধুমাত্র ভ্রমণপথ থেকে এটি দেখুন। |
| 1066 | RoomBundle is missing a RatePlanID | প্রতিটি <RoomBundle> এ একটি <RatePlanID> উপাদান থাকতে হবে। URL-এ সাধারণত <RatePlanID> প্রয়োজন হয়। যদি আপনার <RatePlanID> প্রয়োজন না হয়, তাহলে একটি খালি মান লিখুন, সেই ক্ষেত্রে একটি মান বরাদ্দ করা হবে। |
| 1067 | A RoomData or PackageData value is given without a corresponding internal RoomID or PackageID | যদি অভ্যন্তরীণ <RoomData> অথবা <PackageData> যথাক্রমে <RoomID> অথবা <PackageID> অনুপস্থিত থাকে, তাহলে Google প্রথমে <RoomBundle> এর অধীনে <RoomID> অথবা <PackageID> দিয়ে সংরক্ষণ করার চেষ্টা করবে। অন্যথায়, Google র্যান্ডম আইডি তৈরি করবে। |
| 1068 | Property lacks Tax and OtherFees or all_inclusive setting | বৈশিষ্ট্যগুলি হয় all_inclusive তে সেট করতে হবে অথবা <Tax> এবং <OtherFees> অন্তর্ভুক্ত করতে হবে। <Tax> এবং <OtherFees> এর মান 0 হতে পারে, তবে all_inclusive নির্বাচন না করা পর্যন্ত সেগুলি অবশ্যই দিতে হবে। যেসব বৈশিষ্ট্যের অ-শূন্য <Tax> এবং <OtherFees> আছে, সেগুলির বিবরণ অন্তর্ভুক্ত করুন। যখন <Tax> এবং <OtherFees> শূন্য হিসাবে পরিচিত, তখন সেগুলিকে 0 হিসাবে রিপোর্ট করুন এবং all_inclusive সেট করবেন না। অজানা <Tax> এবং <OtherFees> সহ বৈশিষ্ট্যগুলির জন্য, all_inclusive সেট করুন। |
| 1069 | One or more hotel itineraries were missing from the response | নিশ্চিত করুন যে লেনদেনে কোয়েরিতে অনুরোধ করা সমস্ত আইটেম রয়েছে। |
| 1070 | Can't understand a value for RoomUpgradeIncluded, NightlyValue, or OnPropertyCredit | বিন্যাসটি সংশোধন করুন যাতে প্রতিটি এন্ট্রি একটি মুদ্রার মান হয় যা একটি ফ্লোট হিসাবে বোঝা যায়। |
| 1071 | Can't understand the number of miles listed in MilesIncluded | মানটি পূর্ণসংখ্যায় পরিবর্তন করুন। |
| 1072 | Occupancy in RoomBundle was too large for RoomID and Capacity | নিশ্চিত করুন যে <RoomBundle> এ <Occupancy> ঘরের ধারণক্ষমতার চেয়ে বেশি নয়। উদাহরণস্বরূপ: যদি একটি ঘরের ধারণক্ষমতা ১ হয়, তাহলে <RoomBundle> এ <Occupancy> কে ১-এ সেট করতে হবে। |
| 1073 | No valid RoomBundle is specified, so Rate has been set as unavailable | এই ভ্রমণপথের সমস্ত <RoomBundle> মান অবৈধ এবং প্রত্যাখ্যাত হয়েছে। নিশ্চিত করুন যে প্রতিটি <RoomBundle> এ বৈধ ডেটা রয়েছে। নির্দিষ্ট ত্রুটিগুলি আলাদাভাবে রিপোর্ট করা হবে। |
| 1074 | Double-occupancy price can't be listed for single-capacity RoomBundles | তালিকাভুক্ত <Baserate> টি ডাবল-অকুপেন্সির জন্য, যা ভ্রমণপথের জন্য জমা দেওয়া সমস্ত <RoomBundle> <Capacity> 1 এর হলে নির্দিষ্ট করা যাবে না। যেখানে সমস্ত উপলব্ধ বান্ডেল <Capacity> 1 সহ কক্ষের জন্য, <Baserate> কে -1 (অনুপলব্ধ) এ সেট করুন অথবা <Unavailable> এলিমেন্ট ব্যবহার করুন। |
| 1075 | NumAdults is over the maximum limit | ডেটা ত্রুটি প্রতিরোধ করার জন্য, মোট <Occupancy> মান ২০ বা তার কমের মধ্যে সীমাবদ্ধ। নিশ্চিত করুন যে আপনার <Occupancy> এন্ট্রিগুলি সেই সীমার মধ্যে রয়েছে। |
| 1076 | The text value for NumAdults can't be understood as an integer | adult <Occupancy> এর মান একটি পূর্ণসংখ্যায় পরিবর্তন করুন, যেখানে কোনও দশমিক বা অ-সংখ্যাসূচক বৈশিষ্ট্য থাকবে না। |
| 1077 | Child age is over the maximum limit | ডেটা ত্রুটি প্রতিরোধ করার জন্য, সর্বোচ্চ <Child> age হল ১৭ বছর age <Child> সীমার মধ্যে রয়েছে। |
| 1078 | The text value for Child age can't be understood as an integer | মানটি পূর্ণসংখ্যায় পরিবর্তন করুন। |
| 1079 | The number of guests given in OccupancyDetails is over the maximum limit | ডেটা ত্রুটি প্রতিরোধ করার জন্য, <Occupancy> এর মান ২০ বা তার কমের মধ্যে সীমাবদ্ধ। নিশ্চিত করুন যে আপনার <Occupancy> এন্ট্রিগুলি সেই সীমার মধ্যে রয়েছে। |
| 1080 | Total number of guests given in Occupancy does not match the number in OccupancyDetails | <OccupancyDetails> এ উল্লেখিত প্রাপ্তবয়স্ক এবং শিশুদের মোট সংখ্যা <Occupancy> এ তালিকাভুক্ত মোট অতিথির সংখ্যার সাথে মিলতে হবে। |
| 1081 | NumAdults appears more than once | <OccupancyDetails> এর চাইল্ড এলিমেন্ট হিসেবে অবশ্যই একটি <NumAdults> মান থাকতে হবে। যেকোনো অতিরিক্ত ঘটনা উপেক্ষা করা হবে। |
| 1082 | OccupancyDetails values are provided, but without a value for Occupancy | যখন <OccupancyDetails> প্রদান করা হয়, তখন তাদের পূর্বে <Occupancy> এর জন্য একটি নির্দিষ্ট মান লিখতে হবে। |
| 1083 | NumAdults is missing in OccupancyDetails | <OccupancyDetails> এর চাইল্ড এলিমেন্ট হিসেবে অবশ্যই একটি <NumAdults> মান থাকতে হবে। |
| 1084 | The RoomID exceeds the maximum character limit | নিশ্চিত করুন যে সমস্ত <RoomID> মান অক্ষর সীমার মধ্যে আছে। |
| 1085 | Error for partner: PackageID exceeds character limit | নিশ্চিত করুন যে সমস্ত <PackageID> মান অক্ষর সীমার মধ্যে আছে। |
| 1086 | DetailedFee must have a value as well as attributes for currency and type | নিষিদ্ধ |
| 1087 | DetailedTax is missing required data | <DetailedTax> . এর অবশ্যই মুদ্রা এবং প্রকারের জন্য একটি মান এবং বৈশিষ্ট্য থাকতে হবে। |
| 1088 | Can't understand DetailedFee type | নির্দিষ্ট ফি টাইপটি বোঝা যাচ্ছে না, তাই "other" ফি টাইপটি ব্যবহার করা হবে। সেরা ফলাফলের জন্য, <DetailedFee> .. এ একটি সমর্থিত ফি টাইপ ব্যবহার করুন। |
| 1089 | Can't understand DetailedFee source | নির্দিষ্ট ফি উৎসটি বোঝা যাচ্ছে না, তাই "অন্যান্য" ফি উৎস ব্যবহার করা হবে। সেরা ফলাফলের জন্য, <DetailedFee> .. এ একটি সমর্থিত ফি উৎস ব্যবহার করুন। |
| 1090 | Can't understand DetailedTax type | নির্দিষ্ট করের ধরণটি বোঝা যাচ্ছে না, তাই "other" করের ধরণটি ব্যবহার করা হবে। সেরা ফলাফলের জন্য, <DetailedFee> .. এ একটি সমর্থিত করের ধরণ ব্যবহার করুন। |
| 1091 | Invalid usage of Tax / OtherFees and DetailedTax / DetailedFee | দামের জন্য <Tax> / <OtherFees> অথবা <DetailedTax> . / <DetailedFee> . সরবরাহ করুন, কিন্তু উভয়ই নয়। |
| 1092 | Can't understand detailed Tax and OtherFees for a partner | এই ত্রুটিগুলির মধ্যে এক বা একাধিক ঘটেছে: অবৈধ <Baserate> মুদ্রা, কোন <Baserate> , অবৈধ <DetailedTax> . মুদ্রা, অথবা অবৈধ <DetailedFee> . মুদ্রা। নিশ্চিত করুন যে প্রতিটি মুদ্রা_কোড বৈধ, এবং সমস্ত দামের জন্য একটি <Baserate> বিদ্যমান। |
| 1093 | Invalid usage of Tax / OtherFees and DetailedTax / DetailedFee | দামের জন্য <Tax> / <OtherFees> অথবা <DetailedTax> . / <DetailedFee> . সরবরাহ করুন, কিন্তু উভয়ই নয়। |
| 1094 | Can't understand Currency in converting DetailedTax | একটি বৈধ তিন-অক্ষরের মুদ্রা কোড যোগ করুন, যেমন EUR বা USD। |
| 1095 | Can't understand Currency in converting DetailedFee from $0 to $1 | একটি বৈধ তিন-অক্ষরের মুদ্রা যোগ করুন, যেমন EUR বা USD। |
| 1096 | More than one RoomBundle found with the same hotel ID, RoomID, PackageID, and RatePlanID | নিশ্চিত করুন যে বিভিন্ন <RoomBundle> গুলি হোটেল আইডি, <RoomID> , <PackageID> , এবং <RatePlanID> এর একই সংমিশ্রণ ভাগ করে না। |
| 1097 | RoomBundle must include a child element for Occupancy | <Occupancy> এ সর্বোচ্চ কতজন অতিথির জন্য <RoomBundle> তৈরি করা হবে তা নির্দেশ করা উচিত। যদি এটি সেট না করা থাকে, তাহলে <RoomData> অথবা <PackageData> এ <Occupancy> মান ব্যবহার করা হবে। |
| 1098 | The Baserate for Result should have a positive value unless price is unavailable specified by <Unavailable> ) | <Baserate> এর মান একটি ধনাত্মক সংখ্যায় পরিবর্তন করুন অথবা <Unavailable> ব্যবহার করে এটিকে অনুপলব্ধ চিহ্নিত করুন। |
| 1099 | Invalid Tax and OtherFees | <Tax> এবং <OtherFees> অবশ্যই অ-ঋণাত্মক হতে হবে। |
| 1100 | Invalid LengthOfStay | <LengthOfStay> . অবশ্যই ১ এর সমান বা তার বেশি হতে হবে। |
| কোড | বার্তা | বিবরণ |
| 1101 | Can't understand currency string | নিষিদ্ধ |
| 1102 | The combination of Baserate, Tax, OtherFees, LengthOfStay and Occupancy is invalid or exceeds the default Google price per night limit, which is 10,000 USD plus 2,000 USD for each additional guest over 2. If this limit is too low, it can be manually adjusted by your Technical Account Manager | নিষিদ্ধ |
| 1103 | Tax + OtherFees to Baserate ratio exceeds the Google limit of 10 | <Tax> এবং <OtherFees> এর যোগফল <Baserate> মানের ১০ গুণের বেশি হওয়া উচিত নয়। |
| 1104 | Custom field is too long | লেনদেন বার্তাগুলিতে <Custom[1-5]> উপাদানগুলির জন্য কাস্টম ক্ষেত্রের মান সর্বাধিক অক্ষর দৈর্ঘ্য (200) অতিক্রম করে। আপনাকে ক্ষেত্রের মানটি দৈর্ঘ্যে 200 অক্ষরের কম করতে আপডেট করতে হবে। |
| 1105 | Refundable fields may be set incorrectly | যখন available false হিসেবে সেট করা থাকে, তখন refundable_until_days এবং refundable_until_time খালি থাকা উচিত। |
| 1106 | refundable_until_time requires refundable_until_days | যদি refundable_until_time সেট করা থাকে, তাহলে refundable_until_days প্রয়োজন। |
| 1107 | refundable_until_days is required | যদি available সত্য হিসেবে সেট করা থাকে, তাহলে refundable_until_days প্রয়োজন। |
| 1108 | RoomData photo URL is missing its protocol | RoomData> ছবির URL প্রোটোকলে সংজ্ঞায়িত PhotoURL অ্যাট্রিবিউটে মান যোগ করুন। |
| 1109 | refundable_until_time is strongly recommended | যদি available সত্য হিসেবে সেট করা থাকে, তাহলে refundable_until_time জোরালোভাবে সুপারিশ করা হয়। |
| 1110 | RoomBundle must contain RoomID or RoomData but not both | এই <RoomBundle> তে একটি বৈধ <RoomID> অথবা <RoomData> যোগ করুন। |
| 1111 | Baserate for RoomBundle should be a positive value unless price is unavailable | <Baserate> এর মান একটি ধনাত্মক সংখ্যায় পরিবর্তন করুন অথবা <Unavailable> ব্যবহার করে এটিকে অনুপলব্ধ চিহ্নিত করুন। |
| 1112 | Baserate for Rate should be a positive value unless price is unavailable using <Unavailable> | Change the value of <Baserate> to a positive number or mark it unavailable using <Unavailable> . |
| 1113 | Can't recognize query_id in Result element | query_id <Result> এলিমেন্টে অন্তর্ভুক্ত করা উচিত যা একই ID. দিয়ে Query এর উত্তরে ফেরত পাঠানো হয়। |
| 1114 | Can't understand "action" in PropertyDataSet | <PropertyDataSet> -এ action মান overlay অথবা delta থাকা উচিত। এই মানগুলি নির্দিষ্ট করে যে Google-এর রুম রেট ম্যাপিং সংজ্ঞাগুলিকে ওভারলে করা উচিত নাকি মার্জ করা উচিত। |
| 1115 | Custom field name was already used | কাস্টম ক্ষেত্রের নামগুলি অবশ্যই অনন্য হতে হবে। |
| 1116 | AllowableRoomIDs must contain at least one AllowableRoomID | AllowableRoomIDs খালি রাখা যাবে না। এতে কমপক্ষে একটি ID থাকতে হবে। |
| 1117 | AllowablePackageIDs must contain at least one AllowablePackageID | AllowablePackageIDs খালি রাখা যাবে না। এতে কমপক্ষে একটি ID থাকতে হবে। |
| 1118 | AllowableRoomIDs or AllowablePackageIDs string is empty | অবৈধ AllowableRoomID অথবা AllowablePackageID । |
| 1119 | Unknown element | প্রতিক্রিয়াটিতে একটি অজানা XML উপাদান পাওয়া গেছে। ত্রুটিটি সংশোধন করুন এবং তারপর স্কিমার সাথে এটি যাচাই করুন। |
| 1120 | An all_inclusive rate is specified, but Tax is also provided | all_inclusive ভ্রমণপথে <Tax> এবং <OtherFees> অন্তর্ভুক্ত করা উচিত নয়। |
| 1121 | Timezone in "refundable_until_time" will be ignored. "refundable_until_time" is parsed in the hotel's local timezone | refundable_until_time তে টাইমজোন অনুমোদিত নয়। HH:MM ফর্ম্যাটে সঠিক ঘন্টা এবং মিনিট লিখুন। |
| 1122 | The text value for MinAge can't be understood as an integer | <MinAge> অ্যাট্রিবিউটের মান একটি পূর্ণসংখ্যায় পরিবর্তন করুন। |
| 1123 | Value is over the maximum limit for MinAge | <MinAge> সর্বোচ্চ সীমা অতিক্রম করেছে। ডেটা ত্রুটি প্রতিরোধ করতে, <MinAge> এর মান ৯৯ বা তার কমের মধ্যে সীমাবদ্ধ। নিশ্চিত করুন যে আপনার <MinAge> এন্ট্রিগুলি অনুমোদিত সীমার মধ্যে রয়েছে। |
| 1124 | OccupancySettings must have at least one valid child element value | <OccupancySettings> অবৈধ। এতে কমপক্ষে একটি বৈধ চাইল্ড এলিমেন্ট মান থাকতে হবে। |
| 1125 | Value is over the maximum limit for MinOccupancy | <MinOccupancy> সর্বোচ্চ সীমা অতিক্রম করেছে। ডেটা ত্রুটি প্রতিরোধ করতে, <MinOccupancy> এর মান ৯৯ বা তার কমের মধ্যে সীমাবদ্ধ। আপনার <MinOccupancy> মান সীমার মধ্যে রাখতে হবে। |
| 1126 | The text value for MinOccupancy can't be understood as an integer | <MinOccupancy> একটি পূর্ণসংখ্যার মান হওয়া উচিত। |
| 1127 | OccupancySettings is only accepted in RoomData which is inside of the PropertyDataSet element | আপনি <PropertyDataSet> এলিমেন্টের <RoomData> এ শুধুমাত্র <OccupancySettings> অন্তর্ভুক্ত করতে পারেন। |
| 1128 | Capacity or Occupancy is zero or negative | <Capacity> অথবা <Occupancy> এর জন্য মান খুবই ছোট। ডেটা ত্রুটি প্রতিরোধ করার জন্য, <Capacity> এবং <Occupancy> উভয়কেই ধনাত্মক হতে হবে। |
| 1129 | Invalid AirportTransportationIncluded direction | <AirportTransportationIncluded> এর <direction> অ্যাট্রিবিউটটি from , to , অথবা round_trip থাকা উচিত। |
| 1130 | The text value for AdultCapacity can't be understood as an integer | <AdultCapacity> মানটি টেক্সট হিসেবে দেওয়া হয়েছে। মানটিকে একটি পূর্ণসংখ্যায় পরিবর্তন করুন |
| 1131 | The text value for ChildCapacity can't be understood as an integer | <ChildCapacity> মানটি টেক্সট হিসেবে দেওয়া হয়েছে। মানটি একটি পূর্ণসংখ্যায় পরিবর্তন করুন। |
| 1132 | Value is over the maximum limit for AdultCapacity | <AdultCapacity> সীমা সর্বোচ্চ সীমা অতিক্রম করেছে। ডেটা ত্রুটি প্রতিরোধ করার জন্য, <AdultCapacity> 99 বা তার কম মানের মধ্যে সীমাবদ্ধ। |
| 1134 | Value is too small for AdultCapacity | <AdultCapacity> শূন্য অথবা ঋণাত্মক। ডেটা ত্রুটি প্রতিরোধ করতে, <AdultCapacity> এবং <Occupancy> অবশ্যই ধনাত্মক হতে হবে। |
| 1135 | Value is too small for ChildCapacity | <ChildCapacity> শূন্য অথবা ঋণাত্মক। ডেটা ত্রুটি প্রতিরোধ করতে, <ChildCapacity> এবং <Occupancy> অবশ্যই ধনাত্মক হতে হবে। |
| 1136 | Duplicate localizations found for language | একই ভাষার জন্য একাধিক স্থানীয়করণ অনুমোদিত নয়। |
| 1137 | Result specifies both price and Unavailable | ফলাফলে price এবং <Unavailable> উভয়ই পাওয়া গেছে। এটিতে একটি ধনাত্মক মূল্য বা <Unavailable> উল্লেখ করা উচিত, কিন্তু উভয়ই নয়। |
| 1138 | Value couldn't be understood as an integer | মানটি পূর্ণসংখ্যায় পরিবর্তন করুন। |
| 1139 | Value couldn't be understood as a date | মানটি YYYY-MM-DD ফর্ম্যাটে তারিখে পরিবর্তন করুন। |
| 1140 | <Unavailable> specified for mergeable Result | মার্জেবল <Result> s শুধুমাত্র উপলব্ধ রেট পাঠানোর জন্য ব্যবহার করা উচিত। <Result@mergeable> অ্যাট্রিবিউটটিকে false এ সেট করুন। |
| 1141 | The rate was not available, but did not contain an <Unavailable> element | <Unavailable> উপাদান ব্যবহার না করেই অনুপলব্ধ হার উল্লেখ করা হয়েছে। বার্তায় <Unavailable> উপাদান অন্তর্ভুক্ত করে অনুপলব্ধ হার নির্দিষ্ট করুন। |
| 1142 | Internal error during fetch | অনুরোধ পাঠানোর সময় একটি অভ্যন্তরীণ ত্রুটি ঘটেছে এবং পুনরায় আনার চেষ্টা করা হবে। কোনও পদক্ষেপ নেওয়ার প্রয়োজন নেই। |
| 1143 | Error during fetch | গুগল আপনার সার্ভারে যোগাযোগ করার চেষ্টা করেছিল কিন্তু একটি ত্রুটি ফিরে এসেছে। ফিরিয়ে আনার চেষ্টা আবার করা হবে। আরও বিস্তারিত জানার জন্য আপনার সার্ভার লগগুলি পরীক্ষা করুন। |
| 1144 | Invalid JapaneseHotelRoomStyle | <JapaneseHotelRoomStyle> এর জন্য অবৈধ মান। মানটি অবশ্যই western , japanese , অথবা japanese_western হতে হবে। |
| 1145 | Missing "included" attribute in "Breakfast" or "Dinner" | "অন্তর্ভুক্ত" বৈশিষ্ট্যটি <Breakfast> এবং <Dinner> এ প্রয়োজন। |
| 1146 | Some attributes in "Breakfast" or "Dinner" are ignored | <Breakfast> এবং <Dinner> এর মান যেমন in_room , in_private_space এবং buffet উপেক্ষা করা হয় যদি না included বৈশিষ্ট্যটি true হিসাবে সেট করা হয়। |
| 1147 | Invalid Bed size | <Bed> এর <size> অ্যাট্রিবিউটের জন্য অবৈধ মান। মানটি অবশ্যই single , semi_double , double , queen , অথবা king হতে হবে। |
| 1148 | Width or Length outside Bed | <Width> এবং <Length> অবশ্যই <Bed>. |
| 1149 | Invalid Width or Length | <Width> এবং <Length> unit="cm" এবং একটি ধনাত্মক পূর্ণসংখ্যা সংখ্যা থাকতে হবে। |
| 1150 | Timezone not allowed in CheckinTime and CheckoutTime | <CheckinTime> এবং <CheckoutTime> এর টাইমজোন উপেক্ষা করা হবে। <CheckinTime> এবং <CheckoutTime> হোটেলের স্থানীয় টাইমজোনে পার্স করা হয়। |
| 1151 | Value can't be understood as a time | HH:MM ফর্ম্যাটে সঠিক ঘন্টা এবং মিনিট লিখুন। |
| 1152 | BathAndToilet relation requires both Bath and Toilet | <BathAndToilet> এ <relation> উপেক্ষা করা হয় যদি না <Bath> এবং <Toilet> উভয়ই বিদ্যমান থাকে। |
| 1153 | Invalid BathAndToilet relation | <relation> <BathAndToilet> এর বৈশিষ্ট্যটি অবশ্যই together অথবা separate হতে হবে। |
| 1154 | Invalid Roomsharing | <Roomsharing> এর জন্য অবৈধ মান। মানটি অবশ্যই shared অথবা private হতে হবে। |
| 1155 | Invalid Smoking | <Smoking> এর জন্য অবৈধ মান। মানটি অবশ্যই non_smoking অথবা smoking হতে হবে। |
| 1156 | Provide both Breakfast and Dinner | <Breakfast> এবং <Dinner> উভয়ই প্রদান করার জন্য অত্যন্ত সুপারিশ করা হচ্ছে। অন্যথায়, নির্দিষ্ট খাবারের শর্তাবলী সহ প্যাকেজ খুঁজছেন এমন ব্যবহারকারীদের কাছে আপনার প্যাকেজটি প্রদর্শিত নাও হতে পারে। |
| 1157 | Account is not enabled for RoomBundle or metadata | <RoomBundle> অথবা মেটাডেটার জন্য অ্যাকাউন্টটি সক্ষম করা নেই। রুম বান্ডেলের জন্য আপনার অ্যাকাউন্টটি সক্ষম করতে অনুগ্রহ করে সহায়তার সাথে যোগাযোগ করুন। |
| 1158 | Account is not enabled for non-default occupancy | অ্যাকাউন্টটি নন-ডিফল্ট অকুপেন্সির জন্য সক্ষম করা হয়নি, তবে নন-ডিফল্ট অকুপেন্সির দামগুলি গৃহীত হয়েছে। অকুপেন্সির হারের জন্য আপনার অ্যাকাউন্ট সক্ষম করতে সহায়তার সাথে যোগাযোগ করুন। |
| 1159 | Account is not enabled for child occupancy | শিশু থাকার জন্য অ্যাকাউন্টটি সক্রিয় করা হয়নি, তবে শিশু থাকার জন্য মূল্য প্রাপ্ত হয়েছে। শিশু থাকার জন্য আপনার অ্যাকাউন্ট সক্রিয় করতে সহায়তার সাথে যোগাযোগ করুন। |
| 1160 | Rate rule ID cannot be empty | রেট রুলের আইডি খালি রাখা যাবে না, অনুগ্রহ করে একটি খালি নয় এমন রেট রুলের আইডি ব্যবহার করুন। |
| কোড | বার্তা | বিবরণ |
| 3001 | Unexpected element | পরিবর্তিত মূল্য প্রতিক্রিয়ার জন্য মূল উপাদানটি <Hint> হতে হবে। এই সমস্যাটি ভিন্ন বার্তার ধরণ বা ভুল পথের সাথে প্রতিক্রিয়া জানানোর কারণে হতে পারে। যথাযথভাবে ফাইল স্কিমা বা পথ সংশোধন করুন। |
| 3002 | FirstDate can't be understood | <FirstDate> লেখাটিকে তারিখ হিসেবে বোঝা যাচ্ছে না। YYYY-MM-DD ফর্মে তারিখটি লিখুন। |
| 3003 | LastDate can't be understood | <LastDate> লেখাটিকে তারিখ হিসেবে বোঝা যাচ্ছে না। YYYY-MM-DD ফর্মে তারিখটি লিখুন। |
| 3004 | Checkin date can't be understood | <Checkin> তারিখ লেখাটিকে তারিখ হিসেবে বোঝা যাচ্ছে না। YYYY-MM-DD ফর্মে তারিখটি লিখুন। |
| 3005 | LengthOfStay can't be understood | <LengthOfStay> . লেখাটিকে তারিখ হিসেবে বোঝা যাবে না। তারিখটি YYYY-MM-DD আকারে লিখুন। |
| 3006 | Required elements are missing or invalid: Checkin date and/or LengthOfStay | হয় একটি বৈধ <Checkin> তারিখ অথবা <LengthOfStay> অনুপস্থিত। সতর্কতায় উল্লেখিত উপাদানগুলি যোগ করুন। |
| 3007 | Item with StaysIncludingRange is missing a FirstDate | নিষিদ্ধ |
| 3008 | The FirstDate and LastDate are missing or invalid | <Item> এ উপযুক্ত <FirstDate> এবং <LastDate> যোগ করুন। |
| 3009 | LengthOfStay is over the maximum limit | ডেটা ত্রুটি প্রতিরোধ করার জন্য, <LengthOfStay> সর্বোচ্চ 30 দিনের মধ্যে সীমাবদ্ধ। |
| 3010 | Checkin date is in the past | সমস্ত চেক-ইন তারিখ ভবিষ্যতের হতে হবে। |
| 3012 | FirstDate is after LastDate | <LastDate> অবশ্যই <FirstDate> এর পরে হতে হবে। |
| 3013 | FirstDate is too far in the future | নিশ্চিত করুন যে প্রতিটি ভ্রমণপথের চেক-ইন তারিখ ভবিষ্যতে ৩৩০ দিনের বেশি নয়। |
| 3014 | LastDate is too far in the future | <LastDate> ৩৩০ দিনের বেশি আগে হতে পারবে না। আপনার মানগুলি এমনভাবে সামঞ্জস্য করুন যাতে <LastDate> সেই সীমার মধ্যে থাকে। |
| 3015 | Error in POST | পার্টনার ডেটা টেনে আনার সময় এই সমস্যাটি ঘটেছে। আপনার লগগুলি পরীক্ষা করুন এবং নিশ্চিত করুন যে Google IP ঠিকানাটি অ্যালাউলিস্টে আছে। |
| 3016 | Can't find a matching Google ID for hotel ID | এই পার্টনার হোটেল আইডি থেকে গুগল হোটেল আইডির সাথে গুগলের কোনও ম্যাপিং নেই। এটি প্রক্রিয়াকরণে বিলম্বের কারণে হতে পারে, অথবা গুগল পার্টনার আইডি মেলাতে অক্ষম। আরও সাহায্যের প্রয়োজন হলে গুগল সহায়তার সাথে যোগাযোগ করুন। |
| 3017 | The LastDate given is in the past | <Hint> মানগুলিতে অতীতের তারিখ সহ ব্যাপ্তি অন্তর্ভুক্ত করা যাবে না। |
| 3018 | Item with Stay is missing valid hotel ID values | নিষিদ্ধ |
| 3019 | Item with StaysIncludingRange is missing a valid hotel ID | নিশ্চিত করুন যে সমস্ত আইডি বৈধ এবং হোটেল ফিডে থাকা আইডিগুলির সাথে মেলে। |
| 3020 | Item with Stay is missing valid hotel ID values, and has been skipped | নিশ্চিত করুন যে প্রতিটি <Item> এ কমপক্ষে একটি হোটেল আইডি আছে। |
| 3021 | XML can't be understood | নিশ্চিত করুন যে XML xmllint অথবা সমতুল্য বৈধতা পরীক্ষক, স্কিমা সহ, পাস করতে পারে। |
| 3022 | Error occurred while issuing HintRequest | কনফিগার করা এন্ডপয়েন্টটি পৌঁছানো যাচ্ছে কিনা তা পরীক্ষা করুন। |
| 3023 | Internal error processing "hint" response, will retry | <hint> প্রক্রিয়া করার সময় অভ্যন্তরীণ ত্রুটি ঘটেছে। যদি এই ত্রুটিগুলি অব্যাহত থাকে তবে Google সহায়তার সাথে যোগাযোগ করুন। |
| কোড | বার্তা | বিবরণ |
| 6005 | Upload path not recognized | আপলোড পাথটি কোনও গৃহীত পাথের সাথে মেলেনি। আপলোড পাথটি সংশোধন করতে, ডেভেলপার সাইটে ডকুমেন্টেশন দেখুন। |
| 6006 | Message from an IP that is unknown or not allowed | একটি অজানা আইপি থেকে একটি বার্তা এসেছে। নিশ্চিত করুন যে এই বার্তার partner বৈশিষ্ট্যটি সঠিক এবং এটি Google এর সাথে শেয়ার করা পরিচিত আইপি থেকে আপলোড করা হয়েছে। |
| 6007 | Can't extract OTA information from the OTA message | OTA বার্তাটি প্রত্যাশিত OTA XML ফর্ম্যাটে ছিল না। নিশ্চিত করুন যে ফাইলটি xmllint অথবা সমতুল্য বৈধতা পরীক্ষক পাস করেছে। |
| 6008 | No Partner tag in file | আপলোড করা ফাইলটিতে কোনও partner অ্যাট্রিবিউট ছিল না এবং আইপি অ্যাড্রেস থেকে পার্টনারের নাম বের করা যাচ্ছে না। partner অ্যাট্রিবিউট যোগ করুন এবং আপনার পাঠানো আইপি অ্যাড্রেসটি পরীক্ষা করুন। |
| 6009 | partner not recognized | পার্টনার অ্যাট্রিবিউটে দেওয়া নামটি কোনও পরিচিত পার্টনারের নাম নয়। বানানটি নিশ্চিত করুন, অথবা আপনার সঠিক পার্টনারের নামটি পরীক্ষা করতে Google সহায়তার সাথে যোগাযোগ করুন। |
| 6013 | Uploaded XML failed to parse | একটি জেনেরিক XML পার্সার দ্বারা ফাইলটি পার্সিং করা যায়নি। ফাইলটি পুনরায় ফর্ম্যাট করুন এবং নিশ্চিত করুন যে এটি xmllint অথবা সমতুল্য XML ভ্যালিডিটি চেকার পাস করেছে। |
| 6014 | No Partner tag in file, and more than one Partner with the same IP | ফাইলটিতে কোনও partner অ্যাট্রিবিউট নেই। একই আইপিতে একাধিক পার্টনার তালিকাভুক্ত, তাই গুগল আইপি অ্যাড্রেস থেকে পার্টনার নির্ণয় করতে পারে না। ফাইলটিতে একটি partner ট্যাগ যোগ করুন। |
| 6015 | Transaction push not authorized for a partner | একটি <Transaction> ফাইল এমন একটি পার্টনারের জন্য পুশ করা হয়েছে যা পুল বা হিন্ট মোডের জন্য কনফিগার করা হয়েছে। আপনার ট্রান্সমিশন মোড পরিবর্তন করতে Google সহায়তার সাথে যোগাযোগ করুন। |
| 6018 | Partner not active | পার্টনারটি সক্রিয় না থাকার কারণে ফাইলটি প্রক্রিয়া করা হয়নি। আপনার ফিড সক্রিয় করতে Google সহায়তার সাথে যোগাযোগ করুন। |
| 6019 | Account not configured properly | আপনার পার্টনার কনফিগারেশন যাচাই করতে Google কে বলুন। |
| 6020 | Not authorized to upload feed for subaccount_id | পার্টনার এমন একটি আইপি ঠিকানা থেকে আপলোড করছেন যা আপলোড করা ফাইলে পার্টনারের নামের জন্য আপলোড করার জন্য অনুমোদিত নয়। আপলোড ফাইলে পার্টনারের নাম যাচাই করুন অথবা অন্য কোনও আইপি ঠিকানা থেকে আপলোড করুন, তারপর আবার চেষ্টা করুন। |
| 6021 | Account not configured properly | আপনার পার্টনার কনফিগারেশন যাচাই করতে Google কে বলুন। |
| 6023 | Rejected request from a prohibited country or region | এই অনুরোধের আইপি একটি নিষিদ্ধ দেশ বা অঞ্চল থেকে। অনুমোদিত দেশ বা অঞ্চল থেকে ট্রান্সমিশনটি পুনরায় চেষ্টা করুন। |
| 6024 | Rejected request for gaia_id for the given subaccount_id | সাব-অ্যাকাউন্ট আপলোডের জন্য GAIA অনুমোদন এখনও সক্রিয় নয়। GAIA লগইন ছাড়াই পুনরায় চেষ্টা করুন, অথবা একটি নন-সাব-অ্যাকাউন্ট আপলোড অনুরোধ ব্যবহার করুন। |
| 6025 | Rejected request for the given IP and subaccount_id | অনুরোধ করা subaccount_id জন্য কোনও অংশীদার খুঁজে পাওয়া যায়নি। GAIA ছাড়া, অংশীদারের জন্য IP বৈধ নয়। অনুরোধে subaccount_id পরীক্ষা করে যাচাই করুন। |
| 6026 | Rejected request for the given IP, subaccount_id, and partner | এই পার্টনারের জন্য আইপিটি অ্যালাউলিস্টে নেই। GAIA ছাড়া, আইপিটি পার্টনারের জন্য বৈধ নয়। একটি বৈধ অবস্থান থেকে আবার চেষ্টা করুন অথবা আপনার পার্টনার কনফিগারেশন আপডেট করতে Google সহায়তার সাথে যোগাযোগ করুন। |
| 6027 | No partner attribute in file. Partner was inferred from the IP address | ফাইলটিতে কোনও partner অ্যাট্রিবিউট অন্তর্ভুক্ত করা হয়নি, তবে আমরা আইপি ঠিকানা থেকে পার্টনারটি অনুমান করেছি। একটি partner অ্যাট্রিবিউট যোগ করুন এবং পুনরায় চেষ্টা করুন। |
| 6030 | Problem uploading message. Try resending | বার্তা আপলোড করতে সমস্যা হচ্ছে। আবার পাঠানোর চেষ্টা করুন। যদি সমস্যাটি থেকে যায়, তাহলে Google সহায়তার সাথে যোগাযোগ করুন । |
| 6031 | ARI push not authorized for this account | আপনার অ্যাকাউন্ট কনফিগারেশন যাচাই করতে আপনার টেকনিক্যাল অ্যাকাউন্ট ম্যানেজার (TAM)-এর সাথে যোগাযোগ করুন। |
| 6032 | File upload rate exceeds limit | অ্যাকাউন্টগুলিতে প্রতি সেকেন্ডে ৪০০টি ফাইল আপলোডের হার সীমাবদ্ধ। হয় প্রতি অনুরোধে আপলোড করা ফাইলের সংখ্যা কমিয়ে দিন অথবা একসাথে অনুরোধের সংখ্যা কমিয়ে দিন। |
| 6033 | Failed to parse "account ID" from upload path | আপলোড পাথ অথবা অ্যাকাউন্ট আইডি ভুল। |
| 6034 | Invalid "OAuth 2.0" credentials | OAuth 2.0 শংসাপত্রের ভুল থাকার কারণে Google আপলোড করতে ব্যর্থ হয়েছে। |
| 6035 | Invalid "OAuth 2.0" credentials, fallback to IP | OAuth 2.0 ক্রেডেনশিয়ালগুলি অবৈধ। OAuth allowlist থাকা Google IP ঠিকানাটি পরীক্ষা করে চলেছে। |
| 6037 | Service account doesn't have write permission | OAuth 2.0 ক্রেডেনশিয়ালের সাথে যুক্ত পরিষেবা অ্যাকাউন্টে পর্যাপ্ত লেখার অনুমতি না থাকায় আপলোড করা যায়নি। |
| 6038 | Failed to authorize; falling back to IP | OAuth 2.0 ক্রেডেনশিয়ালের সাথে যুক্ত পরিষেবা অ্যাকাউন্টের লেখার অনুমতি পর্যাপ্ত নেই এবং এটি allowlist এর IP ঠিকানাগুলি পরীক্ষা করে চলেছে। |
| কোড | বার্তা | বিবরণ |
| 7001 | Error from POST | আপনার লগগুলি পরীক্ষা করুন এবং নিশ্চিত করুন যে Google IP ঠিকানাটি অ্যালাউলিস্টে আছে। OTA সংযোগ সেটিংস যাচাই করতে Google সহায়তার সাথে কাজ করুন। |
| 7002 | Error getting partner configuration | পার্টনার কনফিগারেশন পাওয়ার সময় একটি ত্রুটি ঘটেছে। Google সহায়তার সাথে যোগাযোগ করুন এবং তাদের নিশ্চিত করতে বলুন যে পার্টনার কনফিগারেশনটি আপনার জন্য বিদ্যমান। |
| 7004 | Error parsing XML message | XML বার্তাটি ত্রুটিপূর্ণ এবং তাই বোঝা যাচ্ছে না। নিশ্চিত করুন যে ফাইলটি xmllint অথবা সমতুল্য বৈধতা পরীক্ষক পাস করেছে। আরও তথ্যের জন্য, Schemas দেখুন। |
| 7005 | Can't determine a hotel ID for the given RoomStay | <RoomStay> এলিমেন্টটিতে কোনও property_ID সেট ছিল না। এছাড়াও, বার্তায় কোনও গ্লোবাল প্রোপার্টি সংজ্ঞায়িত করা হয়নি। property_ID পরীক্ষা করুন। |
| 7006 | Item with StaysIncludingRange missing valid hotel ID values | Google হোটেল ম্যানিফেস্টে অংশীদারের দ্বারা প্রদত্ত হোটেল আইডির কোনও সংশ্লিষ্ট রেকর্ড নেই। হোটেলটি ক্লাস্টার করা হয়েছে কিনা তা নিশ্চিত করুন। |
| 7007 | A RoomRate element has multiple currencies in its Rate elements | XML বার্তার RoomRate উপাদানগুলির মধ্যে একটিতে বিভিন্ন মুদ্রার উপাদান রয়েছে। এই উপাদানগুলিকে উপেক্ষা করা হচ্ছে। আপনার XML পরিবর্তন করুন যাতে সমস্ত সম্পর্কিত উপাদান একটি একক মুদ্রা ব্যবহার করে। |
| 7008 | Can't understand Tax and OtherFees string | এই XML বার্তা থেকে <Tax> আগের দাম বোঝা যাচ্ছে না। দেখানো স্ট্রিংটি পরীক্ষা করে দাম ঠিক করুন। |
| 7009 | Can't understand price after Tax | এই XML বার্তা থেকে <Tax> এর পরে দামটি Google বুঝতে পারছে না। দেখানো স্ট্রিংটি পরীক্ষা করে দামটি ঠিক করুন। |
| 7010 | Can't understand Tax | এই XML বার্তা থেকে <Tax> বুঝতে পারছি না। দেখানো স্ট্রিংটি পরীক্ষা করুন এবং দাম ঠিক করুন। |
| 7011 | Can't understand date range for rate | এই উপাদানের জন্য প্রদত্ত তারিখগুলি বোঝা যাচ্ছে না। <Effective> এবং <Expire> তারিখগুলি XML-এ যেমন প্রদর্শিত হয় তেমন দেখানো হয় (এবং খালি থাকতে পারে)। তারিখগুলি ঠিক করুন এবং পুনরায় চেষ্টা করুন। |
| 7012 | Unsupported time unit | <Day> এবং <FullDuration> হল একমাত্র সময় ইউনিট যা উপাদানগুলির জন্য সমর্থিত। <Day> এর অর্থ হল প্রতিদিনের হার প্রযোজ্য, যখন <FullDuration> এর অর্থ হল পুরো প্রদত্ত তারিখ পরিসরের জন্য হার প্রযোজ্য। সময়ের ইউনিট পরিবর্তন করুন। |
| 7013 | Base price can't be understood for hotel ID | OTA XML বার্তার মূল মূল্য বোঝা যাচ্ছে না। বার্তাটি ভুল হতে পারে, অথবা একটি নতুন ফর্ম্যাট সমর্থন করার জন্য কোডটি আপডেট করার প্রয়োজন হতে পারে। |
| 7014 | Price with Tax or OtherFees can't be understood for hotel ID | OTA XML বার্তায় মোট মূল্য ( <Baserate> + কর/ফি) বোঝা যাচ্ছে না। বার্তাটি ভুল হতে পারে, অথবা একটি নতুন ফর্ম্যাট সমর্থন করার জন্য কোডটি আপডেট করার প্রয়োজন হতে পারে। |
| 7015 | No price could be understood for hotel ID | OTA XML বার্তায় দাম বোঝা যায়নি। বার্তাটি ভুল হতে পারে, অথবা নতুন ফর্ম্যাট সমর্থন করার জন্য কোডটি আপডেট করার প্রয়োজন হতে পারে। |
| 7016 | No Currency found for hotel ID | আপনার OTA XML বার্তাগুলিতে কোনও মুদ্রা অন্তর্ভুক্ত থাকে না এবং অংশীদার কনফিগারেশন কোনও ডিফল্ট মুদ্রা নির্দিষ্ট করে না। Google সহায়তার সাথে যোগাযোগ করুন এবং তাদের অংশীদার কনফিগারেশনটি ঠিক করতে বলুন অথবা নিশ্চিত করুন যে আপনি মুদ্রার তথ্য পাঠাচ্ছেন। |
| 7017 | Can't understand Tax | TPA_extensions এ দেওয়া রাতের ভাঙ্গন অন্যান্য উপাদানের দেওয়া পরিমাণের সাথে মেলে না। ফলস্বরূপ, অন্যান্য উপাদানের পরিমাণ ব্যবহার করা হয়েছিল। TPA_Elements ভাঙ্গন সামঞ্জস্য করুন। |
| 7018 | Can't understand OtherFees | এই XML বার্তা থেকে <OtherFees> বোঝা যাচ্ছে না। <OtherFees> সামঞ্জস্য করুন এবং আবার চেষ্টা করুন। |
| 7019 | XML warning | নিষিদ্ধ |
| 7020 | XML error | নিষিদ্ধ |
| 7021 | XML request didn't succeed | কোনও সাফল্যের উপাদান ফেরত দেওয়া হয়নি। একই রকম ক্ষেত্রে, ৭০২০ ত্রুটিও প্রায়শই দেখা যাবে। |
| কোড | বার্তা | বিবরণ |
| 8001 | Configuration error | পার্টনার কনফিগারেশনটি সঠিক নয়। পার্টনার কনফিগারেশনটি ঠিক করতে Google সহায়তার সাথে যোগাযোগ করুন। |
| 8002 | Error reading file | ফাইলটি পড়ার সময় একটি ত্রুটি ঘটেছে। যদি আপনি এই বার্তাটি প্রায়শই দেখতে পান, তাহলে Google সহায়তার সাথে যোগাযোগ করুন। |
| 8005 | OTA message unsupported | OTA বার্তাটি বৈধ, কিন্তু আমরা জানি না কিভাবে এই নির্দিষ্ট বার্তাটি বিশ্লেষণ করতে হয়। শুধুমাত্র OTA_HotelAvailNotifRQ এবং OTA_HotelRateAmountNotifRQ বোঝা যাবে। নিশ্চিত করুন যে আপনি সমর্থিত বার্তা প্রকারগুলির মধ্যে একটি ব্যবহার করছেন। |
| 8007 | Can't understand RestrictionStatus for AvailStatusMessage | Google প্রদত্ত সূচী ব্যবহার করে AvailStatusMessage প্রক্রিয়া করতে পারছে না। আমরা <RestrictionStatus> এর মান চিনতে পারছি না, যা ত্রুটি বার্তায় দেখানো হয়েছে। |
| 8008 | Can't understand restriction for AvailStatusMessage | Google প্রদত্ত সূচী ব্যবহার করে AvailStatusMessage প্রক্রিয়া করতে পারছে না। আমরা <RestrictionStatus> এর মান চিনতে পারছি না, যা ত্রুটি বার্তায় দেখানো হয়েছে। |
| 8015 | Can't find AmountBeforeTax in RateAmountMessage / BaseByGuestAmt | দেখানো XML উপাদানটিতে একটি AmountBeforeTax অ্যাট্রিবিউট যোগ করতে হবে। |
| 8016 | Can't find a CurrencyCode for RateAmountMessage and BaseByGuestAmt | RateAmountMessage এ প্রদত্ত XML উপাদানের জন্য Google কোনও মুদ্রা খুঁজে পাচ্ছে না। এছাড়াও, কোনও ডিফল্ট মুদ্রা সেট করা নেই। |
| 8020 | Can't understand the basis attribute for the given tax/fee | OTA XML বার্তায় মোট মূল্য ( <Baserate> + কর/ফি) বোঝা যাচ্ছে না। বার্তাটি ভুল হতে পারে, অথবা একটি নতুন ফর্ম্যাট সমর্থন করার জন্য কোডটি আপডেট করার প্রয়োজন হতে পারে। |
| 8021 | Can't understand the given period attribute | প্রদত্ত কর/ফির জন্য সময়কাল বৈশিষ্ট্যটি বোঝা যাচ্ছে না। সঠিক কর/ফি XML বার্তাটি পাঠাতে ভুলবেন না। |
| 8022 | Can't understand a currency (or get one from config) | XML পার্স করে অথবা পার্টনার কনফিগারেশন থেকে, Google প্রদত্ত ট্যাক্স/ফি উপাদানের জন্য মুদ্রা সেট করতে পারে না। সঠিক ট্যাক্স/ফি XML বার্তাটি পাঠাতে ভুলবেন না। |
| 8023 | Can't understand the given Type element value | প্রদত্ত কর/ফির ধরণ বৈশিষ্ট্যটি Google বুঝতে পারছে না। সঠিক কর/ফি XML বার্তাটি পাঠাতে ভুলবেন না। |
| 8024 | Can't understand value for AvailStatusMessage | AvailStatusMessage এর জন্য, Google একটি <RestrictionStatus> এবং একটি <LengthOfStay> পাবে বলে আশা করা হচ্ছে |
| 8027 | Duplicate BaseByGuestAmt occupancy | দুই বা ততোধিক <BaseByGuestAmt> একই সংখ্যক বাসিন্দাকে উল্লেখ করেছে। |
| 8028 | BaseByGuestAmt occupancy over limit | <BaseByGuestAmt>: ৯৯ বা তার কম মানের মধ্যে সীমাবদ্ধ থাকা উচিত। |
| 8029 | Couldn't obtain rate plan code from RatePlan element | <RatePlan> এলিমেন্টে রেট প্ল্যান কোডটি অনুপলব্ধ। <RatePlan> এলিমেন্টে <RatePlanCode> অ্যাট্রিবিউট সেট করুন। |
| 8030 | Couldn't find notification type at <RatePlan> element | <RatePlan> এলিমেন্টে <RatePlanNotifType> অ্যাট্রিবিউট সেট করুন। |
| 8031 | Unsupported rate plan notification type at RatePlan | <RatePlanNotifType> কে একটি সমর্থিত স্ট্রিংয়ে সেট করুন। |
| 8032 | Failed to find start or end date at RatePlan element for rate deletion | <RatePlan> এলিমেন্টে <Start> এবং <End> অ্যাট্রিবিউট সেট করুন। |
| 8033 | Failed to parse start or end date at RatePlan or Rate element | <RatePlan> উপাদান অথবা <Rate> উপাদানের <Start> এবং <End> বৈশিষ্ট্যগুলিকে বৈধ তারিখে সেট করুন। |
| 8034 | Failed to find InvTypeCode at Rate element | <Rate> এলিমেন্টে <InvTypeCode> অ্যাট্রিবিউট সেট করুন। |
| 8036 | Failed to parse RateTier at Rate element | <Rate> এলিমেন্টের <RateTier> অ্যাট্রিবিউটটিকে একটি বৈধ মানে সেট করুন। |
| 8037 | Failed to parse Count, CountType from InvCount element | <InvCount> এর একটি <Count> এবং <CountType> অ্যাট্রিবিউট থাকতে হবে। |
| 8039 | Expected exactly one StatusApplicationControl | প্রদত্ত প্রসঙ্গে শুধুমাত্র একটি <StatusApplicationControl> উপাদান নির্দিষ্ট করতে হবে। |
| 8040 | Failed to find start or end date at RatePlan or Rate element | <RatePlan> অথবা <Rate> এলিমেন্টে <Start> এবং <End> অ্যাট্রিবিউট সেট করুন। |
| 8041 | Missing Start or End date elements in StatusApplicationControl | <StatusApplicationControl> এলিমেন্টে <Start> এবং <End> অ্যাট্রিবিউট সেট করুন। |
| 8042 | Couldn't interpret Start or End date elements in StatusApplicationControl | <StatusApplicationControl> এলিমেন্টের <Start> এবং <End> অ্যাট্রিবিউটগুলিকে বৈধ YYYY-MM-DD তারিখে সেট করুন। |
| 8043 | Couldn't find inventory code on StatusApplicationControl in Inventory | নিশ্চিত করুন যে প্রত্যাশিত বৈশিষ্ট্যটি <InvTypeCode> <StatusApplicationControl> এ সেট করা আছে। |
| 8044 | Couldn't extract incoming message from SOAP envelope | নিশ্চিত করুন যে পার্টনার SOAP কনফিগারেশনটি সঠিক এবং XML প্রয়োজন অনুযায়ী গঠন করা হয়েছে। |
| 8045 | Invalid device type | ডিভাইসের ধরণটি বৈধ নয়। |
| 8047 | Invalid country code | প্রদত্ত দেশের কোডটি অবৈধ। একটি বৈধ দেশের কোড লিখুন যেমন GB অথবা US । |
| 8048 | Invalid identifier | অবৈধ শনাক্তকারী যা পার্স করা যাবে না। |
| 8049 | Promotion deletion not allowed within overlay | প্রচার মুছে ফেলা অবৈধ। একটি ওভারলে-এর মধ্যে প্রচার মুছে ফেলা যাবে না। |
| 8050 | Invalid action | একটি অবৈধ অ্যাকশন স্ট্রিং আছে যা পার্স করা যাচ্ছে না। |
| 8051 | Invalid element | মুছে ফেলা প্রচারণার মধ্যে উপাদানগুলি অন্তর্ভুক্ত করা যাবে না। |
| 8052 | Invalid date | এই স্ট্রিংটিকে তারিখ হিসেবে বোঝা যাচ্ছে না। অবৈধ তারিখ যা পার্স করা যাবে না। |
| 8053 | Invalid date range | অবৈধ শুরু এবং শেষ সহ তারিখের পরিসর। <start> এর মান <end> এর মানের চেয়ে আগে বা সমান হতে হবে। |
| 8055 | Invalid numeric value,Numeric value that is not within allowed limits | প্রদত্ত মানগুলি অবৈধ। এটি অবশ্যই অনুমোদিত সীমার মধ্যে থাকতে হবে। |
| 8056 | Invalid integer range | প্রদত্ত পরিসরটি অবৈধ। min মান অবশ্যই max মানের চেয়ে কম বা সমান হতে হবে। |
| 8057 | Invalid percentage | অবৈধ শতাংশ যা পার্স করা যাবে না। এই শতাংশ মান অনুমোদিত নয়। শতাংশ মান অবশ্যই ০ থেকে ১০০ এর মধ্যে হতে হবে। |
| 8058 | Invalid timestamp | অবৈধ টাইমস্ট্যাম্প যা পার্স করা যাবে না। প্রদত্ত স্ট্রিংটিকে টাইমস্ট্যাম্প হিসেবে বোঝা যাবে না। টাইমস্ট্যাম্পগুলি অবশ্যই RFC3339 ফর্ম্যাটে হতে হবে। |
| 8059 | Invalid MinMaxMessageType for LengthOfStay | <LengthOfStay> এলিমেন্টে <MinMaxMessageType< হিসেবে <SetMaxLOS> , <SetMinLOS> , <SetForwardMaxStay> , <SetForwardMinStay> , অথবা <FullPatternLOS> উল্লেখ করুন। |
| 8060 | Missing attribute Time on LengthOfStay element | <LengthOfStay> এলিমেন্টে <Time> অ্যাট্রিবিউট সেট করুন। |
| 8061 | Missing both RatePlanCode and BookingLimit attributes in AvailStatusMessage | <BookingLimit> এবং <RatePlanCode> এর মধ্যে অন্তত একটি সেট করা আছে কিনা তা নিশ্চিত করুন। |
| 8063 | Found no RatePlan elements in message | বার্তার <RatePlans> উপাদানে কমপক্ষে একটি <RatePlan> প্রদান করুন। |
| 8064 | Found no Rate elements in RatePlan | <RatePlan> এলিমেন্টের <Rates> বিভাগে কমপক্ষে একটি <Rate> প্রদান করুন। |
| 8065 | Found no <BaseByGuestAmt> elements in <BaseByGuestAmts> | <RatePlan> এলিমেন্টের <Rates> বিভাগে কমপক্ষে একটি <Rate> প্রদান করুন। |
| 8066 | Found no AvailStatusMessage elements in message | <AvailStatusMessages> এলিমেন্টে কমপক্ষে একটি <AvailStatusMessage> প্রদান করুন। |
| 8067 | Found no RateAmountMessage elements in message | বার্তায় কোনও <RateAmountMessage> উপাদান খুঁজে পাওয়া যায়নি। |
| 8068 | Found no Inventory elements in message | <Inventories> এলিমেন্টে কমপক্ষে একটি <Inventory> প্রদান করুন। |
| 8070 | Couldn't obtain rate plan code from StatusApplicationControl element in RateAmount | <StatusApplicationControl> এলিমেন্টে <RatePlanCode> অ্যাট্রিবিউট সেট করুন। |
| 8071 | No ID provided for property | প্রতিটি প্রোপার্টিতে <ID> এলিমেন্ট সেট করুন। |
| 8072 | Excess elements | প্রয়োজনীয় সংখ্যক উপাদান সরবরাহ করা হয়েছে। সেই উপাদানের কম সংখ্যক সরবরাহ করুন। |
| 8073 | Missing required attribute | অনুপস্থিত প্রয়োজনীয় বৈশিষ্ট্যটি প্রদান করুন। |
| 8074 | Missing required element | অনুপস্থিত প্রয়োজনীয় উপাদানটি প্রদান করুন। |
| 8075 | Duplicate element | ডুপ্লিকেট এলিমেন্টটি সরান। |
| 8076 | Missing or malformed "timestamp" attribute | রুট এলিমেন্টে টাইমস্ট্যাম্প অ্যাট্রিবিউটটি RFC 3339 ফর্ম্যাটে সেট করুন। |
| 8077 | Found no Property elements in TaxFeeInfo | <TaxFeeInfo> বার্তায় কমপক্ষে একটি <Property> প্রদান করুন। |
| 8079 | Feed Type doesn't match message type | নিশ্চিত করুন যে সঠিক বার্তার ধরণটি বার্তার ধরণের সাথে সম্পর্কিত শেষ বিন্দুতে পাঠানো হয়েছে। |
| 8080 | Invalid value for attribute NotifType | <NotifType> কে Overlay অথবা Delta অথবা Remove এ সেট করুন |
| 8081 | Invalid value for attribute NotifScopeType | <NotifScopeType> কে <ProductRate> এ সেট করুন। |
| 8082 | Unexpected character in days_of_week | days_of_week শুধুমাত্র MTWHFSU (কেস সংবেদনশীল নয়) অক্ষর হতে পারে, প্রতিটি অক্ষর একবারের বেশি প্রদর্শিত হবে না। |
| 8083 | Duplicate character in days_of_week | আপনি কেবল MTWHFSU (বড় হাতের অক্ষর অসংবেদনশীল) অক্ষর হতে পারবেন, প্রতিটি অক্ষর একাধিকবার প্রদর্শিত হবে না। |
| 8084 | Empty days-of-week string | আপনাকে কমপক্ষে একটি দিন নির্দিষ্ট করতে হবে। |
| 8085 | Error parsing file | সংশ্লিষ্ট ফাইলের বিষয়বস্তু পরীক্ষা করে দেখুন যে এটি অনুমোদিত স্কিমা মেনে চলে কিনা। |
| 8086 | Expected exactly one type of discount | প্রতিটি প্রচারণায় শুধুমাত্র এক ধরণের ছাড় নির্ধারণ করা যেতে পারে। |
| 8087 | Invalid range bound | প্রদত্ত মানটি অবৈধ। |
| 8088 | Missing or malformed TimeStamp attribute | RFC 3339 ফর্ম্যাটে রুট এলিমেন্টে টাইমস্ট্যাম্প অ্যাট্রিবিউট সেট করুন। |
| 8090 | RatePlanCode must not be specified on StatusApplicationControl when AvailStatusMessage contains the BookingLimit attribute | <BookingLimit> সেট করার সময় নিশ্চিত করুন যে রেট প্ল্যান কোড সেট করা নেই। |
| 8091 | AmountBeforeTax and AmountAfterTax must be positive | <AmountBeforeTax> এবং/অথবা <AmountAfterTax> কে একটি ধনাত্মক মানে সেট করুন। |
| 8092 | AmountAfterTax must be greater than or equal to AmountBeforeTax | <AmountAfterTax> <AmountBeforeTax> এর চেয়ে বড় বা সমান মান সেট করুন। |
| 8093 | At most one RestrictionStatus may be defined per AvailStatusMessage | <AvailStatusMessage> প্রতি কমপক্ষে একটি <RestrictionStatus> সেট করুন। |
| 8094 | Start date must be less than or equal to End date | <End> <Start> এর সমান বা তার পরে একটি তারিখে সেট করুন। |
| 8095 | "applied_nights" has no effect when used with "fixed_amount" for "Discount" | <Discount> এর জন্য <fixed_amount> নির্দিষ্ট করার সময় applied_nights সেট করবেন না। |
| 8096 | LengthsOfStay or RestrictionStatus isn't allowed within a AvailStatusMessage that has a BookingLimit | একটি পৃথক <AvailStatusMessage> এলিমেন্টে <LengthsOfStay> এবং/অথবা <RestrictionStatus> উল্লেখ করুন। |
| 8097 | ApplicableNights is invalid | <ApplicableNights> কে একটি বৈধ মানে সেট করুন। |
| 8098 | Cannot specify both "max" and "excluded" in ApplicableNights | <ApplicableNights> এলিমেন্টে <max> অথবা <excluded> উল্লেখ করুন। |
| 8099 | Insufficient conditions to allow 100 percent discount | শতাংশের মান ১০০ তে সেট করা যাবে না যদি না <applied_nights> সর্বনিম্ন <LengthOfStay> এর চেয়ে কম হয়। <applied_nights> এবং <LengthOfStay> উভয়ই উল্লেখ করুন যেখানে <applied_nights> সর্বনিম্ন <LengthOfStay> চেয়ে কম। |
| 8100 | Bad "type" attribute specified for "Stacking" element | <Stacking> এলিমেন্টের type হিসেবে any , base_only , অথবা none উল্লেখ করুন। |
| কোড | বার্তা | বিবরণ |
| 8101 | RateAmountMessages must specify a non-empty HotelCode attribute | <RateAmountMessages> এর জন্য একটি খালি নয় এমন <HotelCode> অ্যাট্রিবিউট নির্দিষ্ট করুন। |
| 8102 | AvailStatusMessages must specify a non-empty HotelCode attribute | <AvailStatusMessages> এর জন্য একটি খালি নয় এমন <HotelCode> অ্যাট্রিবিউট নির্দিষ্ট করুন। |
| 8103 | Inventories must specify a non-empty HotelCode attribute | <Inventories> এর জন্য একটি খালি নয় এমন <HotelCode> অ্যাট্রিবিউট নির্দিষ্ট করুন। |
| 8104 | RatePlans must specify a non-empty HotelCode attribute | <RatePlans> এর জন্য একটি খালি নয় এমন <HotelCode> অ্যাট্রিবিউট নির্দিষ্ট করুন। |
| 8105 | Unable to parse CorrelationID attribute from message | বার্তায় একটি <CorrelationID> বৈশিষ্ট্য উল্লেখ করুন। |
| 8106 | Unknown StayDates "application" type | <application> অবশ্যই any , all , অথবা overlap একটি হতে হবে। |
| 8107 | Invalid StayDates "application" usage | <application>: overlap শুধুমাত্র তখনই বৈধ যখন এটি প্রতি রাতে প্রয়োগ করা হয়। |
| 8108 | Invalid currency code | একটি বৈধ তিন-অক্ষরের মুদ্রা কোড যোগ করুন, যেমন EUR বা USD। একটি বৈধ ISO 4217 তিন-অক্ষরের আলফা অক্ষর কোড ব্যবহার করুন। |
| 8109 | Invalid TimeUnit | <TimeUnit> Day তে সেট করতে হবে। |
| 8110 | Missing StayDates "application" | <application> অবশ্যই <StayDates> এ উল্লেখ করতে হবে। |
| 8111 | Invalid combination of Discount and InventoryCount | <InventoryCount> সীমাবদ্ধতা fixed_amount ছাড়ের সাথে একত্রে অনুমোদিত নয়। <Discount> <InventoryCount> এর সাথে একত্রে percentage অথবা fixed_amount_per_night ব্যবহার করতে হবে। |
| 8112 | Invalid advanced booking input should be a positive integer or duration | প্রদত্ত ইনপুটটি অবৈধ। ইনপুটটি একটি ধনাত্মক পূর্ণসংখ্যা অথবা ISO 8601 সময়কাল হওয়া উচিত। |
| 8113 | Received HTTP response with a non-OK code and an error message | HTTP আনা সম্ভব হয়নি। HTTP প্রতিক্রিয়া ঠিক নেই। |
| 8114 | Period must be set to night when Brackets are specified | <Brackets> ব্যবহার করার জন্য <Period> night এ সেট করুন। |
| 8115 | Value must be greater than or equal to zero | মানটি শূন্যের চেয়ে বড় বা সমান সেট করুন। |
| 8116 | Invalid "starts_at" value in Bracket. Each bracket's "starts_at" value must be strictly greater than the previous bracket's value | Specify a <starts_at> value greater than the <starts_at> value of the previous bracket. |
| 8117 | Amount element mustn't be set when "Brackets" are specified | Set amount in <Bracket> instead. |
| 8118 | Amount must be greater than zero | Set <Amount> to a value greater than zero. |
| 8119 | Exactly one value must be set per message | OTA XML messages must contain data for exactly one property. Specify a single property per OTA XML message. |
| 8120 | Only "overlay" is allowed as an "action" for TaxFeeInfo | Update the <action> attribute to overlay . |
| 8121 | Invalid "type" in UserCountries. Must be either "include" or "exclude" | Update the type attribute to either include or exclude . |
| 8122 | Countries mustn't be empty within UserCountries | Update the <Countries> list to be non-empty. Otherwise, don't include a <Countries> element at all. |
| 8123 | Only one UserCountries entry allowed | Limit to only one <UserCountries> entry. |
| 8126 | Invalid BaseByGuestAmt adult occupancy | The number of adults specified in <BaseByGuestAmt> must be greater than zero. |
| 8127 | AgeQualifyingCode must be specified in each AdditionalGuestAmount element | Specify <AgeQualifyingCode> in each <AdditionalGuestAmount> element. |
| 8128 | Invalid AgeQualifyingCode in an AdditionalGuestAmount element | <AgeQualifyingCode> must be set to 8 for a child or 10 for an adult. |
| 8129 | MaxAge mustn't be specified when AgeQualifyingCode is 10 in each AdditionalGuestAmount element | <MaxAge> is valid only when AgeQualifyingCode is 8. |
| 8130 | MaxAge must be specified when AgeQualifyingCode is 8 in each AdditionalGuestAmount element | Specify <MaxAge> when <AgeQualifyingCode> is 8. |
| 8131 | MaxAge in an AdditionalGuestAmount is greater than 17. It will be treated as 17. | <MaxAge> should be between 1 and 17 . |
| 8132 | Invalid Amount value in an AdditionalGuestAmount element | <Amount> must be greater than or equal to 0. |
| 8133 | Multiple AdditionalGuestAmount elements with AgeQualifyingCode set to 10 | A maximum one <AdditionalGuestAmount> element can contain only amounts for adults. |
| 8134 | Duplicate MaxAge values in AdditionalGuestAmount elements | Each <MaxAge> value must be unique. |
| 8135 | Missing HotelExtraGuestCharges elements in ExtraGuestCharges message | Add <HotelExtraGuestCharges> elements under <ExtraGuestCharges> . |
| 8136 | StayDates "application" attribute is invalid for ExtraGuestCharges message | Remove the <application> attribute for <StayDates> . |
| 8137 | Cannot specify multiple charge modifier attributes | Specify exactly one charge modifier attribute. Eg: <percentage> . |
| 8138 | "percentage" attribute must be a float between 1 and 99, inclusive | Set <percentage> attribute to a float between 1 and 99, inclusive. |
| 8139 | amount attribute must be a float greater than or equal to zero | Set <amount> attribute to a float greater than or equal to zero. |
| 8140 | Element is missing a charge modifier attribute | Specify a charge modifier, Eg: <percentage> . |
| 8141 | AgeBrackets must nest at least one ChildAgeBrackets or AdultCharge element | Add <ChildAgeBrackets> or <AdultCharge> under <AgeBrackets> . |
| 8142 | Missing ChildAgeBracket in ChildAgeBrackets | Add <ChildAgeBracket> elements under <ChildAgeBrackets> . |
| 8143 | ExtraGuestCharge must nest one AgeBrackets element | Add an <AgeBrackets> element in the <ExtraGuestCharge> . |
| 8144 | HotelExtraGuestCharge must set the "hotel_id" attribute | Set the <hotel_id> attribute for <HotelExtraGuestCharge> . |
| 8145 | HotelExtraGuestCharge "action" attribute is not set to "overlay" | Set the <action> attribute to overlay . |
| 8146 | ChildAgeBracket "max_age" attribute should be set to a value between 1 and 17 | Set <max_age> attribute to a value between 1 and 17. |
| 8147 | Invalid FullPatternLOS and FixedPatternLength combination | <LengthOfStay> must contain a child <LOS_Pattern@FullPatternLOS> containing <FixedPatternLength> number of Y and N characters. |
| 8148 | Type must be set to amount if AgeBrackets is specified | Set <Type> to <amount> if <AgeBrackets> is specified. |
| 8149 | "amount" attribute must be a float greater than or equal to zero | Set <amount> attribute to a float greater than or equal to zero. |
| 8150 | Duplicate "max_age" values in "ChildAgeBracket" elements | Each <max_age> value must be unique. |
| 8151 | Basis must be set to "person" if "AgeBrackets" is specified | Set <Basis> to <person> if <AgeBrackets> is specified. |
| 8152 | AgeBrackets can't be specified if "TaxBrackets" or "Amount" are specified | Specify <AgeBrackets> without <TaxBrackets> and <Amount> . |
| 8153 | Expected at least one of the required elements | Must include at least one of the required elements. |
| 8154 | Element has an invalid value for the "counts_as_base_occupant" attribute | Specify a valid value for the <counts_as_base_occupant> attribute. It must be one of always , preferred , never . |
| 8155 | "discount_amount" attribute must be a float greater than zero | Set <discount_amount> attribute to a float greater than zero. |
| 8157 | All "ExtraGuestCharge" for a property should use the same age brackets for children | Check that all <ExtraGuestCharge> under <HotelExtraGuestCharges> use the same age brackets for children. |
| 8158 | Attribute "free_nights" must be at least 1 or greater than 1 for the "FreeNights" element | Attribute <free_nights> must greater than or equal to 1 for the <FreeNights> element. |
| 8159 | Attribute "free_nights" must be at least 1 or greater than 1 for the "FreeNights" element | Attribute <free_nights> must greater than or equal to 1 for the <FreeNights> element. |
| 8160 | The value for "night_selection" must be either "last" or "cheapest" for the "FreeNights" element | The value for <night_selection> must be either <last> or <cheapest> for the <FreeNights> element. |
| 8161 | The value for "repeats" must be set to either "true" or "false" for the "FreeNights" element | The value for <repeats> ; must be set to either true or false for the FreeNights element. |
| 8162 | The value for "discount_percentage" must be between 0 and 100 | The value for <discount_percentage> must be between 0 and 100. |
| 8163 | Nightly rate for occupancy is less than or equal to zero | Check the nightly rates that are sent are accurate. |
| 8164 | Nightly rate for occupancy is greater than the maximum allowed value of 10,000 USD per night | Check the nightly rates that are sent are accurate. |
| 8165 | Each "AllowablePackageID" must be unique | Remove duplicate <AllowablePackageID> . |
| 8166 | Each "AllowableRoomID" must be unique | Remove duplicate <AllowableRoomID> . |
| 8167 | Invalid attribute value | The specified attribute value must be one of the permitted enumerations. |
| 8168 | End date over limit | <End> attribute value in <StatusApplicationControl> is greater than 3 years in the future and has been truncated. |
| 8169 | Start date over limit | <Start> attribute value in <StatusApplicationControl> is older than the current date and has been truncated. |
| 8170 | Both Start and End dates over future limit | Both <Start> and <End> attributes in <StatusApplicationControl> are over three years in the future. |
| 8171 | Both Start and End dates over past limit | Both <Start> and <End> attributes in <StatusApplicationControl> are older than the current date. |
| 8172 | Invalid BaseByGuestAmt occupancy | <BaseByGuestAmt> must specify either <NumberOfGuests> containing adult occupancy or <Type> equal to "14" and Code in {adults}-{children}-0 format. |
| 8173 | Invalid AdditionalGuestAmounts usage | <AdditionalGuestAmounts> mustn't be specified when <BaseByGuestAmt> includes the child charges. |
| 8174 | "amount" attribute must be a float greater than zero | Set the <AdultCharge> <amount> attribute to a float greater than zero. |
| 8175 | Missing RateTimeUnit or UnitMultiplier attribute | Both <RateTimeUnit> and <UnitMultiplier> attributes must be set on a <Rate> element specifying LOS based rates. |
| 8176 | RateTimeUnit should be set to Day | Both <RateTimeUnit> and <UnitMultiplier> attributes must be set on a <RateTimeUnit> attribute in Rate should be set to Day . |
| 8177 | UnitMultiplier attribute in Rate must be between 1 and 30 | <UnitMultiplier> attribute in <Rate> must be between 1 and 30. |
| 8178 | AdditionalGuestAmounts is not supported for LOS based rates | <AdditionalGuestAmounts> isn't supported for LOS based rates. |
| 8179 | LOS based rates are not enabled on this account | LOS based rates isn't enabled on this account. |
| 8183 | Invalid string cannot be parsed as datetime | Can't understand the string as a datetime . |
| 8184 | Invalid yearless date range | Invalid date range. If one of the <start> or <end> is a yearless date, both must be populated and yearless. |
| 8185 | Expected exactly one type of daily discount | Only one type of daily discount can be set per promotion. |
| 8186 | Either Discount or BestDailyDiscount must be specified | Specify either <Discount> or <BestDailyDiscount> , but not both. |
| 8187 | Floor must be less than or equal to Ceiling | The <amount_per_night> attribute in <Floor> must be less than or equal to the <amount_per_night> attribute in <Ceiling> . |
| 8188 | "rank" attribute must be an integer between 1 and 99, inclusive | Set <rank> attribute value to an integer between 1 and 99. |
| 8189 | LOS-based rate messages should set RatePlanType attribute to "26" in StatusApplicationControl | LOS based rate messages should set <RatePlanType> attribute to 26 in <StatusApplicationControl> |
| 8190 | If specified, <RatePlanType> must be set to 26 | If <RatePlanType> is specified, it must be set to 26 . |
| 8191 | Property can't have more than 100 ExtraGuestCharge specified | Property can't have more than 100 <ExtraGuestCharge*gt; specified. Reduce the number of <ExtraGuestCharge> or consider using <AdditionalGuestAmount> . |
| 8192 | MembershipRateRule cannot be used with BestDailyDiscount | Omit <MembershipRateRule> when <BestDailyDiscount> is specified. |
| 8193 | MembershipRateRule must have a non-empty ID | Set <ID> for <MembershipRateRule> |
| 8194 | Too many room entries | The number of room entries after the update exceeds the limit for a single lodging property. There is a limit of 3000 room types per property. Note: You can use the |
| 8195 | Too many lodging products | The number of lodging products after the update exceeds the limit for a single lodging property. There is a limit of 5000 products for the room type and package combinations per property. Note: Reduce the number of products referenced in |
| 8196 | Too many package entries | The number of package entries after the update exceeds the limit for a single lodging property. There is a limit of 3000 packages per property. Note: You can use the |
| 8197 | Too many RateModification entries | The number of <RateModification> entries after the update exceeds the limit for a single lodging property. There is a limit of 200 rate modifications per property. Note: You can use the |
| 8198 | Too many Taxes or Fees | The number of <Tax> or <Fee> entries after the update exceeds the limit for a single lodging property. There is a limit of 300 taxes and fees per property. Note: You can use the |
| 8199 | Too many Promotions | The number of <Promotion> entries after the update exceeds the limit for a single lodging property. There is a limit of 500 promotions per property. Note: You can use the |
| 8200 | Too many ExtraGuestCharges | The number of <ExtraGuestCharge> entries after the update exceeds the limit for a single lodging property. There is a limit of 100 extra guest charges per property. Note: You can use the |
| 8201 | Too many occupancy rates | The number of occupancy rates after the update exceeds the limit for a single lodging property. There is a limit of 50 occupancy rates per property. Note: You can use the |
| 8202 | cumulative_percent specified with <AgeBrackets> or <Brackets> | Don't specify cumulative_percent with either <AgeBrackets> or <Brackets> . |
| 8203 | <Rank> value isn't between 1 and 99 | Specify a <Rank> value between 1 and 99. |
| 8204 | cumulative_percent specified without <Rank> | Application of cumulative_percent requires specifying <Rank> . |
| 8205 | <Stacking> type for a <Promotion> containing <BestDailyDiscount> must be set to base or none . | Specify base or none for <Stacking> type . |
| কোড | বার্তা | বিবরণ |
| 10001 | Unexpected PointOfSale data | The <PointOfSale> . data provided is not the expected landing page. |
| 10002 | Unexpected PointOfSale element | নিষিদ্ধ |
| 10003 | Invalid PointOfSale type | নিষিদ্ধ |
| 10006 | Can't understand PointOfSale attribute | নিষিদ্ধ |
| 10016 | URL is missing for PointOfSale | নিষিদ্ধ |
| 10017 | Can't understand PointOfSale | নিষিদ্ধ |
| 10018 | Can't understand match status | নিষিদ্ধ |
| 10019 | Language is invalid | নিষিদ্ধ |
| 10020 | Unknown match for sitetype | নিষিদ্ধ |
| 10021 | Unknown match for devicetype | নিষিদ্ধ |
| 10022 | No partner name found | নিষিদ্ধ |
| 10023 | Parsing error for partner | নিষিদ্ধ |
| 10024 | No valid landing pages found | নিষিদ্ধ |
| 10026 | Partner is missing "partner_num" | নিষিদ্ধ |
| 10027 | A DisplayName is duplicated across more than one PointOfSale | নিষিদ্ধ |
| 10028 | No PointOfSale found | নিষিদ্ধ |
| 10029 | A DisplayName is duplicated across more than one PointOfSale | নিষিদ্ধ |
| 10030 | Can't recognize the binary file | নিষিদ্ধ |
| 10031 | Found duplicate language display names | নিষিদ্ধ |
| কোড | বার্তা | বিবরণ |
| 11001 | Integer value out of range | Ensure that the value falls within acceptable bounds. |
| 11002 | Duplicate rate in pricing message. Only the first occurring rate was uploaded. Rate details are arrival_date, length_of_stay, room_type, rate_plan, adults, rate_rule | Ensure that each rate is only referred to once per pricing message. |
| 11003 | Invalid date range | Set a <start_date> that is earlier than or equal to <end_date> . |
| 11004 | Invalid roomtype and rateplan combination | Provide a valid room_type rate_plan combination. |
| 11005 | Invalid number of rates | Length of Stay rates should be a comma-separated list of rates but instead has no rates. Provide the correct number of rates. |
| 11006 | Invalid number of taxes | Length of Stay taxes should be a comma-separated list that matches the number of Length of Stay Rates provided. |
| 11007 | No start date provided | Provide a valid start date. |
| 11008 | CurrencyCode field must be populated but is empty instead | Add a valid three-letter currency code code, such as EUR or USD. |
| 11009 | "occupancyPrices" field is empty | <occupancyPrices> field is empty. This message is interpreted as a request to zero-out prices under the specified product. Omit prices when no rates are available. |
| 11010 | "prices" field is empty | <prices> field is empty. This message is interpreted as a request to zero-out all relevant prices under the specified occupancy. Omit prices when no rates are available. |
| 11011 | "rates" field is empty | Omit prices when no rates are available. |
| 11012 | "productPrices" field is unset | <productPrices> field is unset. This message is interpreted as a request to zero-out prices under the specified arrival date. |
| 11013 | "occupancyPrices" field is unset | <occupancyPrices> field is unset. This message is interpreted as a request to zero-out prices under the specified product. |
| 11014 | "prices" field is unset | <prices> field is unset. This message is interpreted as a request to zero-out prices under the specified occupancy. |
| 11015 | Invalid number of fees | Length of Stay fees should be a comma-separated list that matches the number of Length of Stay rates provided. |