Débuter

Vous pouvez interagir par programmation avec Authorized Buyers à l'aide de trois API :

Voici quelques exemples de tâches que vous pouvez effectuer à l'aide des API Authorized Buyers :

  • Accédez aux informations sur les comptes d'enchères en temps réel.
  • Envoyez et gérez les créations en cours d'examen.
  • Récupérez les métriques de dépannage des enchères en temps réel.
  • Gérez les listes d'utilisateurs Authorized Buyers user lists.
  • Gérez les configurations de pré-ciblage.
  • Configurez l'accès client pour Marketplace.
  • Découvrez et gérez les propositions d'accords dans Marketplace.

Si vous ne connaissez pas Authorized Buyers, consultez le Centre d'aide Authorized Buyers et l'interface utilisateur pour en savoir plus.

Configurer l'authentification

Les API Google utilisent le protocole OAuth 2.0 pour l'authentification et l'autorisation. Voici comment configurer l'authentification pour l'API d'enchères en temps réel à l'aide d'OAuth 2.0.

Cet exemple utilise un compte de service. Pour en savoir plus sur le contrôle des accès, consultez la documentation sur Google Cloud Identity and Access Management.

  1. Accédez à la page Google API Console Enabled APIs.

  2. Dans la liste déroulante du projet, sélectionnez un projet ou créez-en un.

  3. Dans la liste des API activées, assurez-vous que l'API d'enchères en temps réel est répertoriée. Si ce n'est pas le cas, cliquez sur l'onglet API Google, recherchez et sélectionnez l'API Real-time Bidding, puis cliquez sur Activer l'API.

  4. Ensuite, dans la barre de gauche, sélectionnez Identifiants.

  5. Sélectionnez la liste déroulante Créer des identifiants, puis choisissez Clé de compte de service.

  6. Dans la liste déroulante Compte de service, sélectionnez Nouveau compte de service.

  7. Saisissez un nom pour le compte de service. L'ID du compte de service est généré automatiquement à partir du nom et du nom du projet.

  8. Notez l'ID du compte de service : vous en aurez besoin pour accorder l'accès au nouveau compte de service dans l'interface utilisateur Authorized Buyers à l'étape 11.

  9. Choisissez le fichier JSON recommandé comme type de clé.

  10. Cliquez sur Créer. Le fichier JSON contenant la paire de clés publique/privée du compte est enregistré dans votre dossier de téléchargements. Conservez le fichier JSON généré dans un endroit sûr.

  11. Vous devez accorder l'accès au compte de service dans l'interface utilisateur Authorized Buyers pour qu'il fonctionne. Sélectionnez Paramètres > Paramètres du compte , puis choisissez Gestion des utilisateurs > Utilisateurs du compte et cliquez sur +Compte de service. Saisissez l'ID du compte de service que vous avez noté à l'étape 8. Cela crée un nouvel utilisateur avec le rôle de compte de service.

Assurez-vous que plusieurs personnes disposent d'un accès administrateur à votre projet cloud, au cas où vous devriez modifier les autorisations.

Demander l'accès à l'API

Lorsque vous parcourez le flux d'autorisation OAuth 2.0, votre application peut spécifier champs d'application pour demander l'accès à certaines fonctionnalités au nom d'autres comptes Google. Utilisez les champs d'application suivants pour obtenir un accès en lecture/écriture à l'une des API Authorized Buyers au nom d'un compte Authorized Buyers :

  • API Marketplace: https://www.googleapis.com/auth/authorized-buyers-marketplace
  • API Enchères en temps réel: https://www.googleapis.com/auth/realtime-bidding
  • API Ad Exchange Buyer II: https://www.googleapis.com/auth/adexchange.buyer

Effectuer un appel d'API

Voici quelques exemples que vous pouvez utiliser pour commencer dans les langages compatibles :

API Marketplace

Java

/*
 * Copyright 2021 Google LLC
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *    https://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

package com.google.api.services.samples.authorizedbuyers.marketplace.v1;

import com.google.api.client.googleapis.javanet.GoogleNetHttpTransport;
import com.google.api.client.http.HttpRequestInitializer;
import com.google.api.client.http.HttpTransport;
import com.google.api.client.json.JsonFactory;
import com.google.api.client.json.gson.GsonFactory;
import com.google.api.services.authorizedbuyersmarketplace.v1.AuthorizedBuyersMarketplace;
import com.google.api.services.authorizedbuyersmarketplace.v1.AuthorizedBuyersMarketplaceScopes;
import com.google.api.services.authorizedbuyersmarketplace.v1.model.Client;
import com.google.auth.http.HttpCredentialsAdapter;
import com.google.auth.oauth2.GoogleCredentials;
import com.google.auth.oauth2.ServiceAccountCredentials;
import java.io.FileInputStream;
import java.io.IOException;
import java.util.HashSet;
import java.util.List;
import java.util.Set;

/**
 * A sample application that authenticates and runs a request against the Authorized Buyers
 * Marketplace API.
 */
public class FirstApiRequest {

  /**
   * Be sure to specify the name of your application. If the application name is {@code null} or
   * blank, the application will log a warning. Suggested format is "MyCompany-ProductName/1.0".
   */
  private static final String APPLICATION_NAME = "APPLICATION_NAME_HERE";

  // Full path to JSON Key file - include file name.
  private static final java.io.File JSON_FILE = new java.io.File("INSERT_PATH_TO_JSON_FILE");

  // Name of the buyer resource for which the API call is being made.
  private static final String BUYER_NAME = "INSERT_BUYER_RESOURCE_NAME";

  // Global instance of the HTTP transport.
  private static HttpTransport httpTransport;

  // Global instance of the JSON factory.
  private static final JsonFactory jsonFactory = GsonFactory.getDefaultInstance();

  public static void main(String[] args) throws Exception {
    // Create credentials using the JSON key file.
    GoogleCredentials credentials = null;

    try (FileInputStream serviceAccountStream = new FileInputStream((JSON_FILE))) {
      Set<String> scopes = new HashSet<>(AuthorizedBuyersMarketplaceScopes.all());
      credentials = ServiceAccountCredentials.fromStream(serviceAccountStream).createScoped(scopes);
    } catch (IOException ex) {
      System.out.println("Can't complete authorization step. Did you specify a JSON key file?");
      System.out.println(ex);
      System.exit(1);
    }

    HttpRequestInitializer requestInitializer = new HttpCredentialsAdapter(credentials);
    httpTransport = GoogleNetHttpTransport.newTrustedTransport();

    // Use the credentials to create a client for the API service.
    AuthorizedBuyersMarketplace marketplaceClient =
        new AuthorizedBuyersMarketplace.Builder(httpTransport, jsonFactory, requestInitializer)
            .setApplicationName(APPLICATION_NAME)
            .build();

    // Call the buyers.clients.list method to get a list of clients for the given buyer.
    List<Client> clients =
        marketplaceClient.buyers().clients().list(BUYER_NAME).execute().getClients();

    if (clients != null && clients.size() > 0) {
      System.out.printf("Listing of clients associated with buyer \"%s\"%n", BUYER_NAME);
      for (Client client : clients) {
        System.out.printf("* Client name: %s\n", client.getName());
      }
    } else {
      System.out.printf(
          "No clients were found that were associated with buyer \"%s\"%n.", BUYER_NAME);
    }
  }
}

API d'enchères en temps réel

Java

Voici un exemple de base qui montre comment utiliser l'API d'enchères en temps réel avec Java.

  1. Créer un projet Maven

    Ouvrez le fichier pom.xml et ajoutez les dépendances suivantes :

    <dependencies>
      <dependency>
        <groupId>com.google.api-client</groupId>
        <artifactId>google-api-client</artifactId>
        <version>1.32.2</version>
      </dependency>
      <dependency>
        <groupId>com.google.apis</groupId>
        <artifactId>google-api-services-pubsub</artifactId>
        <version>v1-rev452-1.25.0</version>
      </dependency>
      <dependency>
        <groupId>com.google.apis</groupId>
        <artifactId>google-api-services-realtimebidding</artifactId>
        <version>v1-rev20220503-1.32.1</version>
      </dependency>
      <dependency>
        <groupId>com.google.auth</groupId>
        <artifactId>google-auth-library-oauth2-http</artifactId>
        <version>1.3.0</version>
      </dependency>
      <dependency>
        <groupId>com.google.code.gson</groupId>
        <artifactId>gson</artifactId>
        <version>2.8.9</version>
      </dependency>
      <dependency>
        <groupId>com.google.http-client</groupId>
        <artifactId>google-http-client-jackson2</artifactId>
        <version>1.40.1</version>
      </dependency>
      <dependency>
        <groupId>joda-time</groupId>
        <artifactId>joda-time</artifactId>
        <version>2.10.13</version>
      </dependency>
      <dependency>
        <groupId>net.sourceforge.argparse4j</groupId>
        <artifactId>argparse4j</artifactId>
        <version>0.9.0</version>
      </dependency>
    </dependencies>
      

  2. Configurer vos identifiants

    Tous les appels à l'API nécessitent une authentification. Créez un Credential à l'aide du fichier de clé JSON du compte de service décrit ci-dessus.

    GoogleCredentials credentials = null;
    
    try (FileInputStream serviceAccountStream = new FileInputStream((JSON_FILE))) {
      Set<String> scopes = new HashSet<>(RealTimeBiddingScopes.all());
      credentials = ServiceAccountCredentials.fromStream(serviceAccountStream).createScoped(scopes);
    } catch (IOException ex) {
      System.out.println("Can't complete authorization step. Did you specify a JSON key file?");
      System.out.println(ex);
      System.exit(1);
    }
  3. Créer un client pour l'API d'enchères en temps réel

    Vous pouvez ensuite créer votre client d'API d'enchères en temps réel à l'aide du modèle Builder pattern :

    HttpRequestInitializer requestInitializer = new HttpCredentialsAdapter(credentials);
    httpTransport = GoogleNetHttpTransport.newTrustedTransport();
    
    // Use the credentials to create a client for the API service.
    RealTimeBidding realtimeBidding =
        new RealTimeBidding.Builder(httpTransport, jsonFactory, requestInitializer)
            .setApplicationName(APPLICATION_NAME)
            .build();

  4. Effectuer une opération

    Une fois que vous avez instancié un client pour vous connecter à l'API, vous pouvez effectuer une opération. Le code suivant renvoie toutes les créations d'un acheteur donné.

        List<Creative> creatives =
            realtimeBidding
                .buyers()
                .creatives()
                .list(BUYER_NAME)
                .setView("FULL")
                .execute()
                .getCreatives();
    
        if (creatives != null && creatives.size() > 0) {
          System.out.printf("Listing of creatives associated with buyer '%s'%n", BUYER_NAME);
          for (Creative creative : creatives) {
            System.out.printf("* Creative name: %s\n", creative.getName());
          }
        } else {
          System.out.printf(
              "No creatives were found that were associated with buyer '%s'%n.", BUYER_NAME);
        }

Pour en savoir plus sur l'utilisation de l'API d'enchères en temps réel avec Java, consultez le README dans les exemples d'API d'enchères en temps réel.

Python

Voici un exemple de base qui montre comment utiliser l'API d'enchères en temps réel avec Python.

  1. Télécharger et installer le client Python de l'API Google

    Exemple utilisant pip :

    $ pip install --upgrade google-api-python-client

  2. Configurer vos identifiants

    Tous les appels à l'API nécessitent une authentification. Instanciez une service_account.Credentials instance à l'aide du fichier de clé JSON du compte de service décrit ci-dessus.

      credentials = service_account.Credentials.from_service_account_file(
          KEY_FILE, scopes=[SCOPE])
  3. Créer un client pour l'API d'enchères en temps réel

    Vous pouvez ensuite créer votre client d'API Real-time Bidding à l'aide de l'instance autorisée service_account.Credentials :

    realtimebidding = build('realtimebidding', VERSION, credentials=credentials)

  4. Effectuer une opération

    Une fois que vous avez instancié un client pour vous connecter à l'API, vous pouvez effectuer une opération. Le code suivant renvoie toutes les créations d'un acheteur donné.

    request = realtimebidding.buyers().creatives().list(parent=BUYER_NAME)
    
    pprint.pprint(request.execute())

Pour en savoir plus sur l'utilisation de l'API Ad Exchange Buyer avec Python, consultez le README dans les exemples d'API d'enchères en temps réel.

PHP

Voici un exemple de base qui montre comment utiliser l'API d'enchères en temps réel avec PHP.

  1. Configurer des dépendances

    Si vous ne l'avez pas encore installé, téléchargez et installez Composer, puis créez un fichier composer.json avec un contenu semblable à celui-ci :

    {
      "description": "Authorized Buyers Real-Time Bidding API PHP Samples",
      "require": {
        "php": ">=7.2",
        "google/apiclient": "^2.0"
      },
      "require-dev": {
        "squizlabs/php_codesniffer": "3.*"
      },
      "type": "project",
      "homepage": "https://github.com/googleads/authorized-buyers-rtb-api-samples/tree/master/php",
      "license": "Apache-2.0",
      "authors": [
        {
          "name": "Google",
          "homepage": "https://github.com/googleads/authorized-buyers-rtb-api-samples/graphs/contributors"
        }
      ]
    }

    Enfin, exécutez la commande suivante pour installer les bibliothèques de dépendances :

    composer install
  2. Configurer un client

    Créez un Google_Client et utilisez-le pour instancier Google_Service_RealTimeBidding.

    $client = new Google_Client();
    $client->setApplicationName('Authorized Buyers Real-time Bidding API PHP Samples');
    
    $service = new Google_Service_RealTimeBidding($client);
  3. Configurer vos identifiants

    Tous les appels à l'API nécessitent un jeton d'accès valide. Configurez votre client pour parcourir le flux OAuth 2.0.

    $client->setAuthConfig($keyFileLocation);
    $client->addScope('https://www.googleapis.com/auth/realtime-bidding');
    
    if ($client->isAccessTokenExpired()) {
        $client->refreshTokenWithAssertion();
    }
  4. Effectuer une opération

    Une fois que vous avez instancié un client pour vous connecter à l'API et configuré OAuth 2.0, vous pouvez l'utiliser pour effectuer un appel d'API. Le code suivant renvoie toutes les créations d'un acheteur donné :

    $result = $service->buyers_creatives->listBuyersCreatives($buyerName, $queryParams);
    
    print "Creatives associated with buyer account\n";
    if (empty($result['creatives'])) {
        print "No creatives found\n";
        return;
    } else {
        foreach ($result['creatives'] as $creative) {
            print_r($creative);
        }
    }

Pour en savoir plus sur l'utilisation de l'API Ad Exchange Buyer avec PHP, consultez le README dans les exemples d'API d'enchères en temps réel.

.NET

Voici un exemple de base qui montre comment utiliser l'API Real-time Bidding avec C#.

  1. Créer un projet

    Ouvrez Visual Studio Code et créez un projet.

  2. Ajouter les références de bibliothèque requises à votre projet

    Dans le fichier *.csproj de votre projet, ajoutez une entrée PackageReference pour Google.Apis, Google.Apis.Auth, Google.Apis.Core, Google.Apis.Oauth2.v2 et Google.Apis.RealTimeBidding.v1. Par exemple :

    <ItemGroup>
      <PackageReference Include="Google.Apis" Version="1.57.0" />
      <PackageReference Include="Google.Apis.Auth" Version="1.57.0" />
      <PackageReference Include="Google.Apis.Core" Version="1.57.0" />
      <PackageReference Include="Google.Apis.Oauth2.v2" Version="1.57.0.1869" />
      <PackageReference Include="Google.Apis.Pubsub.v1" Version="1.57.0.2667" />
      <PackageReference Condition="!Exists('./Google.Apis.RealTimeBidding.v1.csproj')" Include="Google.Apis.RealTimeBidding.v1" Version="1.57.0.2680" />
      <PackageReference Include="log4net" Version="2.0.13" />
      <PackageReference Include="Microsoft.Extensions.Configuration" Version="3.1.4" />
      <PackageReference Include="Microsoft.NETFramework.ReferenceAssemblies" Version="1.0.0">
        <PrivateAssets>all</PrivateAssets>
        <IncludeAssets>runtime; build; native; contentfiles; analyzers</IncludeAssets>
      </PackageReference>
      <PackageReference Include="Mono.Options" Version="6.12.0.148" />
      <PackageReference Include="Newtonsoft.Json" Version="13.0.1" />
    </ItemGroup>

    Pour en savoir plus sur ces dépendances, consultez la page https://www.nuget.org/packages/.

  3. Configurer vos identifiants

    Tous les appels à l'API nécessitent une authentification. Créez un Credential à l'aide de l'adresse e-mail du compte de service et du fichier JSON décrits ci-dessus.

    var credentialParameters = NewtonsoftJsonSerializer.Instance
        .Deserialize<JsonCredentialParameters>(
            System.IO.File.ReadAllText(ServiceKeyFilePath));
    
    // Create the credentials.
    var credentialInitializer = new ServiceAccountCredential.Initializer(
            credentialParameters.ClientEmail)
        {
            Scopes = new[] { RealTimeBiddingService.Scope.RealtimeBidding }
        }.FromPrivateKey(credentialParameters.PrivateKey);
    
    var oAuth2Credentials = new ServiceAccountCredential(credentialInitializer);
  4. Créer un client pour l'API d'enchères en temps réel

    Vous pouvez ensuite créer votre RealTimeBiddingService :

    var serviceInitializer = new BaseClientService.Initializer
        {
            HttpClientInitializer = oAuth2Credentials,
            ApplicationName = "FirstAPICall"
        };
    
    var realtimebidding = new RealTimeBiddingService(serviceInitializer);
  5. Effectuer une opération

    Une fois que vous avez instancié un client pour vous connecter à l'API, vous pouvez effectuer une opération. Le code suivant liste les créations d'un compte acheteur Authorized Buyers spécifié associé à vos identifiants.

    BuyersResource.CreativesResource.ListRequest request =
        realtimebidding.Buyers.Creatives.List(buyerName);
    request.View = BuyersResource.CreativesResource.ListRequest.ViewEnum.FULL;
    
    IList<Creative> creatives = request.Execute().Creatives;
    
    foreach (Creative creative in creatives)
    {
        Console.WriteLine("* Creative name: {0}", creative.Name);
    }

Pour en savoir plus sur l'utilisation de l'API d'enchères en temps réel avec C#, consultez le fichier README dans les exemples d'API d'enchères en temps réel.

Ruby

Voici un exemple de base qui montre comment utiliser l'API d'enchères en temps réel avec Ruby.

  1. Télécharger et installer le client Ruby de l'API Google

    Si vous ne l'avez pas encore installé, téléchargez et installez Bundler, puis créez un fichier Gemfile avec un contenu semblable à celui-ci :

    source "https://rubygems.org"
    
    ruby "2.6.0"
    
    gem 'google-apis-pubsub_v1', '0.10.0'
    gem 'google-apis-realtimebidding_v1', '~> 0.14.0'

    Enfin, exécutez la commande suivante pour installer les bibliothèques de dépendances :

    bundle
  2. Configurer vos identifiants

    Tous les appels à l'API nécessitent une authentification. Créez des identifiants à l'aide de l'adresse e-mail du compte de service et du fichier JSON décrits ci-dessus.

    # Create credentials using the JSON key file.
      auth_options = {
        :json_key_io => File.open(KEY_FILE, "r"),
        :scope => 'https://www.googleapis.com/auth/realtime-bidding'
      }
    
      oauth_credentials = Google::Auth::ServiceAccountCredentials.make_creds(
        options=auth_options
      )
  3. Créer un client pour AdExchangeBuyer

    Vous pouvez ensuite créer votre client AdExchange Buyer autorisé à l'aide des identifiants :

    # Create the service and set credentials
      realtimebidding = (
        Google::Apis::RealtimebiddingV1::RealtimeBiddingService.new
      )
      realtimebidding.authorization = oauth_credentials
      realtimebidding.authorization.fetch_access_token!
  4. Effectuer une opération

    Une fois que vous avez instancié un client pour vous connecter à l'API, vous pouvez effectuer une opération. Le code suivant renvoie toutes les créations d'un acheteur donné.

    # Call the buyers.creatives.list method to get list of creatives for given buyer.
        creatives_list = realtimebidding.list_buyer_creatives(
            BUYER_NAME, view: 'FULL')
    
        if creatives_list.creatives.any?
          puts "Found the following creatives for buyer '%s':" % BUYER_NAME
          creatives_list.creatives.each do |creative|
            puts "* Creative name: #{creative.name}"
          end
        else
          puts "No creatives were found that were associated with buyer '%s'" % BUYER_NAME
        end

Pour en savoir plus sur l'utilisation de l'API d'enchères en temps réel avec Ruby, consultez le fichier README dans les exemples d'API d'enchères en temps réel.

API Ad Exchange Buyer II

Java

/*
 * Copyright (c) 2017 Google Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except
 * in compliance with the License. You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software distributed under the License
 * is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express
 * or implied. See the License for the specific language governing permissions and limitations under
 * the License.
 */

package com.google.api.services.samples.adexchangebuyer.cmdline.v2_x;

import com.google.api.client.googleapis.services.json.AbstractGoogleJsonClient;
import com.google.api.services.adexchangebuyer2.v2beta1.AdExchangeBuyerII;
import com.google.api.services.adexchangebuyer2.v2beta1.model.AbsoluteDateRange;
import com.google.api.services.adexchangebuyer2.v2beta1.model.Client;
import com.google.api.services.adexchangebuyer2.v2beta1.model.Date;
import com.google.api.services.adexchangebuyer2.v2beta1.model.FilterSet;
import com.google.api.services.adexchangebuyer2.v2beta1.model.RealtimeTimeRange;
import com.google.api.services.adexchangebuyer2.v2beta1.model.RelativeDateRange;
import com.google.api.services.samples.adexchangebuyer.cmdline.BaseSample;
import java.io.IOException;
import java.util.List;

/**
 * This sample illustrates how to retrieve all Bidder-level Filter Sets.
 */
public class GetAllBidderLevelFilterSets extends BaseSample {
  @Override
  public ClientType getClientType() {
    return ClientType.ADEXCHANGEBUYERII;
  }

  @Override
  public String getName() {
    return "Get All Bidder-level Filter Sets.";
  }

  @Override
  public String getDescription() {
    return "Lists Filter Sets associated with the given Bidder.";
  }

  @Override
  public void execute(AbstractGoogleJsonClient client) throws IOException {
    AdExchangeBuyerII adXClient = (AdExchangeBuyerII) client;
    String bidderResourceId = getStringInput("bidderResourceId", "Enter the Bidder's resource ID");
    String ownerName = String.format("bidders/%s", bidderResourceId);
    List<FilterSet> allFilterSets = adXClient.bidders().filterSets().list(ownerName).execute()
        .getFilterSets();

    if (allFilterSets != null && allFilterSets.size() > 0) {
      System.out.println("========================================");
      System.out.printf("Listing of Filter Sets associated with Bidder \"%s\"%n", ownerName);
      System.out.println("========================================");
      for (FilterSet filterSet : allFilterSets) {
        System.out.printf("* Filter Set name: %s%n", filterSet.getName());
        AbsoluteDateRange absDateRange = filterSet.getAbsoluteDateRange();
        if(absDateRange != null) {
          System.out.println("AbsoluteDateRange");
          System.out.printf("\tStart date: %s%n",
              convertDateToString(absDateRange.getStartDate()));
          System.out.printf("\tEnd date: %s%n",
              convertDateToString(absDateRange.getEndDate()));
        }
        RelativeDateRange relDateRange = filterSet.getRelativeDateRange();
        if(relDateRange != null) {
          Integer offset = relDateRange.getOffsetDays();
          System.out.println("RelativeDateRange");
          System.out.printf("\tOffset days: %s%n", offset != null ? offset : 0);
          System.out.printf("\tDuration days: %s%n", relDateRange.getDurationDays());
        }
        RealtimeTimeRange rtTimeRange = filterSet.getRealtimeTimeRange();
        if(rtTimeRange != null) {
          System.out.println("RealtimeTimeRange");
          System.out.printf("\tStart timestamp: %s%n", rtTimeRange.getStartTimestamp());
        }
        String timeSeriesGranularity = filterSet.getTimeSeriesGranularity();
        if(timeSeriesGranularity != null) {
          System.out.printf("Time series granularity: %s%n", timeSeriesGranularity);
        }
        String format = filterSet.getFormat();
        if(format != null) {
          System.out.printf("\tFormat: %s%n", format);
        }
        String environment = filterSet.getEnvironment();
        if(environment != null) {
          System.out.printf("Environment: %s%n", environment);
        }
        List<String> platforms = filterSet.getPlatforms();
        if(platforms != null) {
          System.out.println("Platforms:");
          for(String platform : platforms) {
            System.out.printf("\t%s%n", platform);
          }
        }
        List<Integer> sellerNetworkIds = filterSet.getSellerNetworkIds();
        if(filterSet.getSellerNetworkIds() != null) {
          System.out.println("Seller network IDS:");
          for(Integer sellerNetworkId : sellerNetworkIds) {
            System.out.printf("\t%d%n", sellerNetworkId);
          }
        }
      }
    } else {
      System.out.printf("No Filter Sets were found associated with Bidder \"%s\"%n", ownerName);
    }
  }

  private String convertDateToString(Date date) {
    return String.format("%d%02d%02d", date.getYear(), date.getMonth(), date.getDay());
  }
}

Python

#!/usr/bin/python
#
# Copyright 2017 Google Inc. All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#      http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

"""This example lists bidder-level filter sets."""


import argparse
import os
import pprint
import sys

sys.path.insert(0, os.path.abspath('..'))

from googleapiclient.errors import HttpError
import samples_util


_OWNER_NAME_TEMPLATE = 'bidders/{bidders_resource_id}'

DEFAULT_BIDDER_RESOURCE_ID = 'ENTER_BIDDER_RESOURCE_ID_HERE'


def main(ad_exchange_buyer, owner_name):
  try:
    # Construct and execute the request.
    filter_sets = ad_exchange_buyer.bidders().filterSets().list(
        ownerName=owner_name).execute()
    print(f'Listing FilterSets for bidder: "{owner_name}".')
    pprint.pprint(filter_sets)
  except HttpError as e:
    print(e)


if __name__ == '__main__':
  parser = argparse.ArgumentParser(
      description='Creates a bidder-level filter set with the specified options'
  )
  # Required fields.
  parser.add_argument(
      '-b', '--bidder_resource_id', default=DEFAULT_BIDDER_RESOURCE_ID,
      help=('The resource ID of the bidders resource for which the filter '
            'sets were created. This will be used to construct the ownerName '
            'used as a path parameter for filter set requests. For additional '
            'information on how to configure the ownerName path parameter, '
            'see: https://developers.google.com/authorized-buyers/apis/'
            'reference/rest/v2beta1/bidders.filterSets/list'
            '#body.PATH_PARAMETERS.owner_name'))

  args = parser.parse_args()

  try:
    service = samples_util.GetService('v2beta1')
  except IOError as ex:
    print(f'Unable to create adexchangebuyer service - {ex}')
    print('Did you specify the key file in samples_util.py?')
    sys.exit(1)

  main(service, _OWNER_NAME_TEMPLATE.format(
           bidders_resource_id=args.bidder_resource_id))

PHP

<?php
/**
 * Copyright 2017 Google Inc.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

require_once __DIR__ . '/../../BaseExample.php';

/**
 * This example illustrates how to retrieve all Bidder-level Filter Sets.
 */
class ListBidderLevelFilterSets extends BaseExample {

  /**
   * @see BaseExample::getInputParameters()
   */
  protected function getInputParameters() {
    return [
        [
            'name' => 'bidderResourceId',
            'display' => 'Bidder Resource ID',
            'required' => true
        ]
    ];
  }

  /**
   * @see BaseExample::run()
   */
  public function run() {
    $values = $this->formValues;
    $ownerName = sprintf(
        'bidders/%s',
        $values['bidderResourceId']
    );
    $result = $this->service->bidders_filterSets
        ->listBiddersFilterSets($ownerName);
    print sprintf(
        '<h2>Listing Bidder-level Filter Sets for ownerName "%s"</h2>',
         $ownerName
    );
    if (empty($result['filterSets'])) {
      print '<p>No Bidder-level Filter Sets found.</p>';
    } else {
      foreach ($result['filterSets'] as $filterSets) {
        $this->printResult($filterSets);
      }
    }
  }

  /**
   * @see BaseExample::getClientType()
   */
  public function getClientType() {
    return ClientType::AdExchangeBuyerII;
  }

  /**
   * @see BaseExample::getName()
   */
  public function getName() {
    return 'RTB Troubleshooting: List Bidder-level Filter Sets';
  }
}

.NET

/* Copyright 2017, Google Inc. All Rights Reserved.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

using Google.Apis.AdExchangeBuyerII.v2beta1;
using Google.Apis.AdExchangeBuyerII.v2beta1.Data;
using Google.Apis.Services;

using System;
using System.Collections.Generic;

namespace Google.Apis.AdExchangeBuyer.Examples.v2_x
{
    /// <summary>
    /// Retrieves the bidder-level filter sets for the given bidder resource ID.
    /// </summary>
    public class ListBidderLevelFilterSets : ExampleBase
    {
        /// <summary>
        /// Main method, to run this code example as a standalone application.
        /// </summary>
        /// <param name="args">The command line arguments</param>
        public static void Main(string[] args)
        {
            AdExchangeBuyerIIService service = Utilities.GetV2Service();
            ExampleBase example = new ListBidderLevelFilterSets();
            Console.WriteLine(example.Description);

            example.Run(service);
        }

        /// <summary>
        /// Returns a description about the code example.
        /// </summary>
        public override string Description
        {
            get { return "This code example lists all bidder-level filter sets for the given " +
                    "bidder resource ID."; }
        }

        /// <summary>
        /// Runs the code example.
        /// </summary>
        /// <param name="service">An authenticated AdExchangeBuyerIIService</param>
        public override void Run(BaseClientService service)
        {
            AdExchangeBuyerIIService adXService = (AdExchangeBuyerIIService)service;
            string bidderResourceId = "INSERT_BIDDER_RESOURCE_ID_HERE";
            string ownerName = String.Format("bidders/{0}", bidderResourceId);

            ListFilterSetsResponse response = adXService.Bidders.FilterSets.List(ownerName)
                .Execute();

            Console.WriteLine("========================================\n");
            Console.WriteLine("Listing of filter sets associated with owner name \"{0}\"",
                ownerName);
            Console.WriteLine("========================================\n");

            if (response.FilterSets.Count == 0)
            {
                Console.WriteLine("No filter sets found.");
            } else
            {
                foreach (FilterSet filterSet in response.FilterSets)
                {
                    Console.WriteLine("* Name: {0}", filterSet.Name);
                    AbsoluteDateRange absDateRange = filterSet.AbsoluteDateRange;
                    if (absDateRange != null)
                    {
                        Console.WriteLine("\tAbsoluteDateRange:");
                        Date startDate = absDateRange.StartDate;
                        Console.WriteLine("\t\tStartDate:");
                        Console.WriteLine("\t\t\tYear: {0}", startDate.Year);
                        Console.WriteLine("\t\t\tMonth: {0}", startDate.Month);
                        Console.WriteLine("\t\t\tDay: {0}", startDate.Day);
                        Date endDate = absDateRange.EndDate;
                        Console.WriteLine("\t\tEndDate:");
                        Console.WriteLine("\t\t\tYear: {0}", endDate.Year);
                        Console.WriteLine("\t\t\tMonth: {0}", endDate.Month);
                        Console.WriteLine("\t\t\tDay: {0}", endDate.Day);
                    }
                    RelativeDateRange relDateRange = filterSet.RelativeDateRange;
                    if (relDateRange != null)
                    {
                        Console.WriteLine("\tRelativeDateRange:");
                        Console.WriteLine("\t\tOffsetDays: {0}", relDateRange.OffsetDays);
                        Console.WriteLine("\t\tDurationDays: {0}", relDateRange.DurationDays);
                    }
                    RealtimeTimeRange rtTimeRange = filterSet.RealtimeTimeRange;
                    if (rtTimeRange != null)
                    {
                        Console.WriteLine("\tRealtimeTimeRange:");
                        Console.WriteLine("\t\tStartTimestamp: {0}", rtTimeRange.StartTimestamp);
                    }
                    String timeSeriesGranularity = filterSet.TimeSeriesGranularity;
                    if (timeSeriesGranularity != null)
                    {
                        Console.WriteLine("\tTimeSeriesGranularity: {0}", timeSeriesGranularity);
                    }
                    IList<String> formats = filterSet.Formats;
                    if (formats != null)
                    {
                        Console.WriteLine("\tFormats:");
                        foreach (string format in formats)
                        {
                            Console.WriteLine("\t\t{0}", format);
                        }
                    }
                    String environment = filterSet.Environment;
                    if (environment != null)
                    {
                        Console.WriteLine("\tEnvironment: {0}", environment);
                    }
                    IList<string> platforms = filterSet.Platforms;
                    if (platforms != null)
                    {
                        Console.WriteLine("\tPlatforms:");
                        foreach (string platform in platforms)
                        {
                            Console.WriteLine("\t\t{0}", platform);
                        }
                    }
                    IList<int?> sellerNetworkIds = filterSet.SellerNetworkIds;
                    if (sellerNetworkIds != null)
                    {
                        Console.WriteLine("\tSellerNetworkIds:");
                        foreach (int? sellerNetworkId in sellerNetworkIds)
                        {
                            Console.WriteLine("\t\t{0}", sellerNetworkId);
                        }
                    }
                }
            }
        }

        public override ClientType getClientType()
        {
            return ClientType.ADEXCHANGEBUYERII;
        }
    }
}

Ruby

#!/usr/bin/env ruby
# Encoding: utf-8
#
# Copyright:: Copyright 2017, Google Inc. All Rights Reserved.
#
# License:: Licensed under the Apache License, Version 2.0 (the "License");
#           you may not use this file except in compliance with the License.
#           You may obtain a copy of the License at
#
#           http://www.apache.org/licenses/LICENSE-2.0
#
#           Unless required by applicable law or agreed to in writing, software
#           distributed under the License is distributed on an "AS IS" BASIS,
#           WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
#           implied.
#           See the License for the specific language governing permissions and
#           limitations under the License.
#
# Lists the filter sets for a given bidder.
#
# Tags: Bidders.FilterSets.list

require 'optparse'

require_relative '../samples_util'


def list_bidder_level_filter_sets(ad_exchange_buyer, owner_name, page_size)
  begin
    response = ad_exchange_buyer.list_bidder_filter_sets(
        owner_name, page_size: page_size
    )

    unless response.filter_sets.nil?
      puts 'Found the following filter sets for bidder %s:' % owner_name
      response.filter_sets.each do |filter_set|
        puts '* Filter set name: %s' % filter_set.name
        if !filter_set.absolute_date_range.nil?
          abs_date_range = filter_set.absolute_date_range
          start_date = abs_date_range.start_date
          end_date = abs_date_range.end_date
          puts "\tAbsolute date range:"
          puts "\t\tStart date: %s-%s-%s" % [start_date.year, start_date.month,
              start_date.day]
          puts "\t\tEnd date: %s-%s-%s" % [end_date.year, end_date.month,
              end_date.day]
        end
        unless filter_set.realtime_time_range.nil?
          realtime_time_range = filter_set.realtime_time_range
          puts "\tRealtime time range:"
          puts "\t\tStart timestamp: %s" % realtime_time_range.start_timestamp
        end
        unless filter_set.relative_date_range.nil?
          relative_date_range = filter_set.relative_date_range
          puts "\tRelative date range:"
          puts "\t\tOffset days: %s" % relative_date_range.offset_days
          puts "\t\tDuration days: %s" % relative_date_range.duration_days
        end
        unless filter_set.time_series_granularity.nil?
          puts "\tTime series granularity: %s" %
              filter_set.time_series_granularity
        end
        unless filter_set.format.nil?
          puts "\tFormat: %s" % filter_set.format
        end
        unless filter_set.environment.nil?
          puts "\tEnvironment: %s" % filter_set.environment
        end
        unless filter_set.platforms.nil?
          puts "\tPlatforms: %s" % filter_set.platforms.inspect
        end
        unless filter_set.seller_network_ids.nil?
          puts "\tSeller network IDs: %s" %
              filter_set.seller_network_ids.inspect
        end
      end
    else
      puts 'No filter sets found for bidder %s.' % owner_name
    end
  rescue Google::Apis::ServerError => e
    raise "The following server error occured:\n%s" % e.message
  rescue Google::Apis::ClientError => e
    raise "Invalid client request:\n%s" % e.message
  rescue Google::Apis::AuthorizationError => e
    raise "Authorization error occured:\n%s" % e.message
  end
end


if __FILE__ == $0
  begin
    # Retrieve the service used to make API requests.
    service = get_service(ADEXCHANGEBUYER_V2BETA1)
  rescue ArgumentError => e
    raise 'Unable to create service, with error message: %s' % e.message
  rescue Signet::AuthorizationError => e
    raise ('Unable to create service, was the KEY_FILE in samples_util.rb ' +
           'set? Error message: %s') % e.message
  end

  # Set options and default values for fields used in this example.
  options = [
    Option.new(
      'bidder_resource_id',
      ('The resource ID of the bidders resource for which the filter ' +
       'sets were created. This will be used to construct the ownerName ' +
       'used as a path parameter for filter set requests. For additional ' +
       'information on how to configure the ownerName path parameter, ' +
       'see: https://developers.google.com/authorized-buyers/apis/reference/' +
       'rest/v2beta1/bidders.filterSets/list#body.PATH_PARAMETERS.owner_name'),
      :short_alias => 'b', :required => true,
      :default_value => nil  # Insert default value here.
    ),
    Option.new(
      'max_page_size',
      'The maximum number of entries returned on one result page.',
      :type => Integer, :short_alias => 'm', :required => true,
      :default_value => MAX_PAGE_SIZE
    )
  ]

  # Parse options.
  parser = Parser.new(options)
  opts = parser.parse(ARGV)

  owner_name = 'bidders/%s' % opts['bidder_resource_id']

  list_bidder_level_filter_sets(service, owner_name, opts['max_page_size'])
end

Étapes suivantes

Répondre à une enquête

Aidez-nous à améliorer cette documentation : dites-nous ce qui a fonctionné et ce que nous avons oublié en répondant à une brève enquête.