دمج Liftoff Monetize باستخدام التوسّط

This guide shows you how to use the Google Mobile Ads SDK to load and display ads from Liftoff Monetize using AdMob Mediation, covering both bidding and waterfall integrations. It covers how to add Liftoff Monetize to an ad unit's mediation configuration, and how to integrate the Vungle SDK and adapter into an iOS app.

Supported integrations and ad formats

The mediation adapter for Liftoff Monetize has the following capabilities:

¹ Bidding integration for this format is in closed beta.

² Bidding integration for this format is in open beta.

³ Waterfall integration for this format is in closed beta.

Requirements

• iOS deployment target of 12.0 or higher

• [For bidding]: Liftoff Monetize adapter 6.11.0.1 or higher (latest version recommended)

• Latest Google Mobile Ads SDK

• Complete the mediation Get started guide

Step 1: Set up configurations in Liftoff Monetize UI

اشترِك أو سجِّل الدخول إلى حسابك على Liftoff Monetize.

أضف تطبيقك إلى لوحة تحكم Liftoff Monetize عن طريق النقر على الزر Add Application (إضافة تطبيق).

املأ النموذج، مع إدخال جميع التفاصيل المطلوبة.

بعد إنشاء تطبيقك، اختَر تطبيقك من لوحة بيانات تطبيقات تحقيق الربح من Liftoff.

دوِّن رقم تعريف التطبيق.

إضافة مواضع جديدة

لإنشاء موضع إعلان جديد لاستخدامه مع AdMob التوسّط، انتقل إلى لوحة بيانات مواضع تحقيق الربح من Liftoff، وانقر على الزر إضافة موضع إعلان واختَر تطبيقك من القائمة المنسدلة.

في ما يلي تفاصيل إضافة مواضع جديدة:

دوِّن رقم التعريف المرجعي وانقر على صوت جيد.

تحديد موقع مفتاح واجهة برمجة التطبيقات Reporting API

تفعيل وضع الاختبار

لتفعيل الإعلانات الاختبارية، انتقِل إلى لوحة بيانات Liftoff Monetize وانتقل إلى التطبيقات.

اختَر تطبيقك الذي تريد تفعيل إعلانات الاختبار له ضمن قسم رقم التعريف المرجعي لموضع الإعلان في تطبيقك. ويمكن تفعيل الإعلانات الاختبارية باختيار وضع الاختبار على عرض الإعلانات الاختبارية فقط ضمن قسم الحالة.

Step 2: Set up Liftoff Monetize demand in AdMob UI

ضبط إعدادات التوسّط لوحدتك الإعلانية

عليك إضافة Liftoff Monetize إلى إعداد التوسّط لوحدتك الإعلانية.

أولاً، سجِّل الدخول إلى حسابك على AdMob. بعد ذلك، انتقِل إلى علامة التبويب التوسّط. إذا كانت لديك مجموعة توسّط حالية تريد تعديلها، انقر على اسم مجموعة التوسّط لتعديلها، ثم انتقِل مباشرةً إلى إضافة Liftoff Monetize كمصدر إعلان.

لإنشاء مجموعة توسّط جديدة، اختَر إنشاء مجموعة توسّط.

أدخِل شكل الإعلان والمنصّة، ثمّ انقر على متابعة.

أدخِل اسمًا لمجموعة التوسّط، واختَر مواقع جغرافية لاستهدافها. بعد ذلك، اضبط حالة مجموعة التوسّط على مفعَّلة، ثمّ انقر على إضافة وحدات إعلانية.

اربط مجموعة التوسّط هذه بواحدة أو أكثر من وحداتك الإعلانية AdMob الحالية. بعد ذلك، انقر على تمّ.

من المفترض أن تظهر لك الآن بطاقة الوحدات الإعلانية التي تمت تعبئتها بالوحدات الإعلانية التي حدّدتها:

إضافة Liftoff Monetize كمصدر إعلان

Add Liftoff to GDPR and US state regulations ad partners list

اتّبِع الخطوات الواردة في إعدادات اللائحة العامة لحماية البيانات و إعدادات اللوائح السارية في الولايات الأمريكية لإضافة Liftoff إلى اللائحة العامة لحماية البيانات (GDPR) وقائمة شركاء الإعلانات للوائح الولايات الأمريكية في AdMob واجهة المستخدم.

Step 3: Import the Vungle SDK and adapter

Using CocoaPods (recommended)

• Add the following line to your project's Podfile:

  pod 'GoogleMobileAdsMediationVungle'
  

• From the command line run:

  pod install --repo-update
  

Manual integration

• Download the latest version of the Vungle SDK and link VungleSDK.framework in your project.

• Download the latest version of the Liftoff Monetize adapter from the download link in the Changelog and link LiftoffMonetizeAdapter.framework in your project.

• Add the following Frameworks to your project:

  • AdSupport
  • AudioToolbox
  • AVFoundation
  • CFNetwork
  • CoreGraphics
  • CoreMedia
  • libz.tbd
  • MediaPlayer
  • QuartzCore
  • StoreKit
  • SystemConfiguration

Step 4: Implement privacy settings on Liftoff Monetize SDK

EU consent and GDPR

Under the Google EU User Consent Policy, you must ensure that certain disclosures are given to, and consents obtained from, users in the European Economic Area (EEA) regarding the use of device identifiers and personal data. This policy reflects the requirements of the EU ePrivacy Directive and the General Data Protection Regulation (GDPR). When seeking consent, you must identify each ad network in your mediation chain that may collect, receive, or use personal data and provide information about each network's use. Google currently is unable to pass the user's consent choice to such networks automatically.

Liftoff Monetize includes an API that lets you pass consent to the Vungle SDK. The following sample code shows how to pass this consent information to the Vungle SDK. If you choose to call this method, it is recommended that you do so prior to requesting ads through the Google Mobile Ads SDK.

import VungleAdsSDK
// ...

VunglePrivacySettings.setGDPRStatus(true)
VunglePrivacySettings.setGDPRMessageVersion("v1.0.0")

#import <VungleAdsSDK/VungleAdsSDK.h>
// ...

[VunglePrivacySettings setGDPRStatus:YES];
[VunglePrivacySettings setGDPRMessageVersion:@"v1.0.0"];

See GDPR recommended implementation instructions for more details and the values that can be provided in the method.

US states privacy laws

U.S. states privacy laws require giving users the right to opt out of the "sale" of their "personal information" (as the law defines those terms), with the opt-out offered via a prominent "Do Not Sell My Personal Information" link on the "selling" party's homepage. The U.S. states privacy laws compliance guide offers the ability to enable restricted data processing for Google ad serving, but Google is unable to apply this setting to each ad network in your mediation chain. Therefore, you must identify each ad network in your mediation chain that may participate in the sale of personal information and follow guidance from each of those networks to ensure compliance.

Liftoff Monetize includes an API that lets you pass consent to the Vungle SDK. The following sample code shows how to pass this consent information to the Vungle SDK. If you choose to call this method, it is recommended that you do so prior to requesting ads through the Google Mobile Ads SDK.

import VungleAdsSDK
// ...

VunglePrivacySettings.setCCPAStatus(true)

#import <VungleAdsSDK/VungleAdsSDK.h>
// ...

[VunglePrivacySettings setCCPAStatus:YES];

See CCPA recommended implementation instructions for more details and the values that can be provided in the method.

Step 5: Add required code

SKAdNetwork integration

Follow Liftoff Monetize's documentation to add the SKAdNetwork identifiers to your project's Info.plist file.

Step 6: Test your implementation

تفعيل الإعلانات التجريبية

احرص على تسجيل جهاز الاختبار من أجل AdMob وتفعيل وضع الاختبار في واجهة المستخدم Liftoff Monetize .

التحقّق من الإعلانات الاختبارية

للتأكّد من أنّك تتلقّى إعلانات اختبارية من Liftoff Monetize، فعِّل اختبار مصدر إعلان فردي في "أداة فحص الإعلانات" باستخدام Liftoff Monetize (Bidding) and Liftoff Monetize (Waterfall) مصادر الإعلانات.

Optional steps

Network-specific parameters

The Liftoff Monetize adapter supports an additional request parameter which can be passed to the adapter using the VungleAdNetworkExtras class. This class includes the following properties:

userId

A string representing Liftoff Monetize's Incentivized User ID.

nativeAdOptionPosition

An integer specifying the privacy icon position for native ads.

Here's a code example of how to create an ad request that sets these parameters:

#import "VungleAdapter.h"
// ...

let request = GADRequest()
let extras = VungleAdNetworkExtras()
extras.userId = "myUserID"
extras.nativeAdOptionPosition = 1
// ...
request.register(extras)

#import <LiftoffMonetizeAdapter/VungleAdapter.h>
// ...

GADRequest *request = [GADRequest request];
VungleAdNetworkExtras *extras = [[VungleAdNetworkExtras alloc] init];
extras.userId = @"myUserID";
extras.nativeAdOptionPosition = 1;
// ...
[request registerAdNetworkExtras:extras];

Native ads rendering

The Liftoff Monetize adapter returns its native ads as GADNativeAd objects. It populates the following native ads field descriptions for a GADNativeAd.

¹ The Liftoff Monetize adapter does not provide direct access to the main image asset for its native ads. Instead, the adapter populates the GADMediaView with a video or an image.

Error codes

If the adapter fails to receive an ad from Liftoff Monetize, publishers can check the underlying error from the ad response using GADResponseInfo.adNetworkInfoArray under the following classes:

Here are the codes and accompanying messages thrown by the Liftoff Monetize adapter when an ad fails to load:

Liftoff Monetize iOS Mediation Adapter Changelog

Version 7.4.0.0

• Verified compatibility with Vungle SDK 7.4.0.

Built and tested with:

• Google Mobile Ads SDK version 11.6.0.
• Vungle SDK version 7.4.0.

Version 7.3.2.0

• Verified compatibility with Vungle SDK 7.3.2.

Built and tested with:

• Google Mobile Ads SDK version 11.3.0.
• Vungle SDK version 7.3.2.

Version 7.3.1.1.0

• Verified compatibility with Vungle SDK 7.3.1.1.

Built and tested with:

• Google Mobile Ads SDK version 11.3.0.
• Vungle SDK version 7.3.1.1.

Version 7.3.1.0

• Verified compatibility with Vungle SDK 7.3.1.

Built and tested with:

• Google Mobile Ads SDK version 11.3.0.
• Vungle SDK version 7.3.1.

Version 7.3.0.0

• Verified compatibility with Vungle SDK 7.3.0.
• Fixed an issue where the adapter cannot be imported in Swift.
• Added waterfall and bidding support for app open ad format.

Built and tested with:

• Google Mobile Ads SDK version 11.2.0.
• Vungle SDK version 7.3.0.

Version 7.2.2.1

• Now requires minimum iOS version 12.0.
• Now requires Google Mobile Ads SDK version 11.0 or higher.
• Included Info.plist in the frameworks within LiftoffMonetizeAdapter.xcframework.

Built and tested with:

• Google Mobile Ads SDK version 11.0.1.
• Vungle SDK version 7.2.2.

Version 7.2.2.0

• Verified compatibility with Vungle SDK 7.2.2.
• Now requires minimum iOS version of 12.0.

Built and tested with:

• Google Mobile Ads SDK version 11.0.0.
• Vungle SDK version 7.2.2.

Version 7.2.1.1

• Updated the MREC matching to be any size that can fit an MREC instead of being an exact match.

Built and tested with:

• Google Mobile Ads SDK version 10.14.0.
• Vungle SDK version 7.2.1.

Version 7.2.1.0

• Verified compatibility with Vungle SDK 7.2.1.

Built and tested with:

• Google Mobile Ads SDK version 10.14.0.
• Vungle SDK version 7.2.1.

Version 7.2.0.0

• Verified compatibility with Vungle SDK 7.2.0.
• Removed the deprecated willBackgroundApplication delegate methods from the banner and interstitial ad implementations.
• Replaced the deprecated childDirectedTreatment method with the GADMobileAds.sharedInstance.requestConfiguration.tagForChildDirectedTreatment property.

Built and tested with:

• Google Mobile Ads SDK version 10.14.0.
• Vungle SDK version 7.2.0.

Version 7.1.0.0

• Verified compatibility with Vungle SDK 7.1.0.

Built and tested with:

• Google Mobile Ads SDK version 10.10.0.
• Vungle SDK version 7.1.0.

Version 7.0.1.0

• Added watermark support for bidding ads.
• Verified compatibility with Vungle SDK 7.0.1.

Built and tested with:

• Google Mobile Ads SDK version 10.7.0.
• Vungle SDK version 7.0.1.

Version 7.0.0.0

• Rebranded adapter name from Vungle to Liftoff Monetize.
• Verified compatibility with Vungle SDK 7.0.0.
• Removed support of the armv7 architecture.
• Added support for the arm64 simulator architecture.
• Now requires minimum iOS version 11.0.
• Now requires Google Mobile Ads SDK version 10.4.0 or higher.

Built and tested with:

• Google Mobile Ads SDK version 10.4.0.
• Vungle SDK version 7.0.0.

Version 6.12.3.0

• Verified compatibility with Vungle SDK 6.12.3.

Built and tested with:

• Google Mobile Ads SDK version 10.2.0.
• Vungle SDK version 6.12.3.

Version 6.12.2.0

• Verified compatibility with Vungle SDK 6.12.2.

Built and tested with:

• Google Mobile Ads SDK version 10.0.0.
• Vungle SDK version 6.12.2.

Version 6.12.1.2

• Now requires Google Mobile Ads SDK version 10.0.0 or higher.

Built and tested with:

• Google Mobile Ads SDK version 10.0.0.
• Vungle SDK version 6.12.1.

Version 6.12.1.1

• Verified compatibility with Vungle SDK 6.12.1.
• Added bidding support for banner ad format.

Built and tested with:

• Google Mobile Ads SDK version 9.14.0.
• Vungle SDK version 6.12.1.

Version 6.12.1.0

• Verified compatibility with Vungle SDK 6.12.1.

Built and tested with:

• Google Mobile Ads SDK version 9.13.0.
• Vungle SDK version 6.12.1.

Version 6.12.0.0

• Verified compatibility with Vungle SDK 6.12.0.
• Added waterfall mediation and bidding support for rewarded interstitial ad format.
• Added bidding support for native ad format.
• Updated the adapter to use the didRewardUser API.
• Removed the ordinal extra in VungleAdNetworkExtras.
• Now requires Google Mobile Ads SDK version 9.8.0 or higher.

Built and tested with:

• Google Mobile Ads SDK version 9.9.0.
• Vungle SDK version 6.12.0.

Version 6.11.0.2

• Added waterfall mediation support for native ad format.

Built and tested with:

• Google Mobile Ads SDK version 9.8.0.
• Vungle SDK version 6.11.0.

Version 6.11.0.1

• Added support for loading multiple ads for the same placement ID in bidding interstitial and rewarded ads.

Built and tested with:

• Google Mobile Ads SDK version 9.6.0.
• Vungle SDK version 6.11.0

Version 6.11.0.0

• Verified compatibility with Vungle SDK 6.11.0.

Built and tested with:

• Google Mobile Ads SDK version 9.4.0.
• Vungle SDK version 6.11.0

Version 6.10.6.1

• Fixed an issue where the ad delegate was removed if the next ad failed to download. This applies to auto-cached setting placements only.
• Removed willPresentFullScreenView and adapterWillPresentFullScreenModal callbacks in banner ads.

Built and tested with:

• Google Mobile Ads SDK version 9.0.0.
• Vungle SDK version 6.10.6

Version 6.10.6.0

• Verified compatibility with Vungle SDK 6.10.6.
• Verified compatibility with Google Mobile Ads SDK version 9.0.0.
• Now requires Google Mobile Ads SDK version 9.0.0 or higher.

Built and tested with:

• Google Mobile Ads SDK version 9.0.0.
• Vungle SDK version 6.10.6

Version 6.10.5.1

• Added bidding support for interstitial and rewarded ad formats.

Built and tested with

• Google Mobile Ads SDK version 8.13.0.
• Vungle SDK version 6.10.5

Version 6.10.5.0

• Verified compatibility with Vungle SDK 6.10.5.

Built and tested with

• Google Mobile Ads SDK version 8.13.0.
• Vungle SDK version 6.10.5

Version 6.10.4.0

• Verified compatibility with Vungle SDK 6.10.4.
• Updated the adapter to respect the mute setting in Vungle's publisher dashboard when the muteIsSet boolean in VungleAdNetworkExtras is not explicitly set.

Built and tested with

• Google Mobile Ads SDK version 8.12.0.
• Vungle SDK version 6.10.4

Version 6.10.3.1

• Fixed a bug where interstitial callbacks were not invoked after the first playback.
• Updated the options dictionary that is passed into playAd method to include the muted property set by the publisher in the extras object.

Built and tested with

• Google Mobile Ads SDK version 8.12.0.
• Vungle SDK version 6.10.3

Version 6.10.3.0

• Verified compatibility with Vungle SDK 6.10.3.
• Now requires minimum iOS version of 10.0.

Built and tested with

• Google Mobile Ads SDK version 8.11.0.
• Vungle SDK version 6.10.3.

Version 6.10.1.0

• Verified compatibility with Vungle SDK 6.10.1.
• Relaxed dependency to Google Mobile Ads SDK version 8.0.0 or higher.
• Now requires building against Xcode 12.5 or higher.

Built and tested with

• Google Mobile Ads SDK version 8.9.0.
• Vungle SDK version 6.10.1.

Version 6.10.0.0 (rolled back)

• Verified compatibility with Vungle SDK 6.10.0.
• Relaxed dependency to Google Mobile Ads SDK version 8.0.0 or higher.
• Now requires building against Xcode 12.5 or higher.

Built and tested with

• Google Mobile Ads SDK version 8.4.0.
• Vungle SDK version 6.10.0.

Version 6.9.2.0

• Verified compatibility with Vungle SDK 6.9.2.
• Now requires Google Mobile Ads SDK version 8.3.0 or higher.

Built and tested with

• Google Mobile Ads SDK version 8.3.0.
• Vungle SDK version 6.9.2.

Version 6.9.1.0

• Verified compatibility with Vungle SDK 6.9.1.
• Now requires Google Mobile Ads SDK version 8.1.0 or higher.
• Added standardized adapter error codes and messages.
• Updated the adapter to use the .xcframework format.
• Remove VungleSDKResetPlacementForDifferentAdSize error check for loading Ads.
• Introduce the new SDK delegate callback vungleAdViewedForPlacement: to track impression.

Built and tested with

• Google Mobile Ads SDK version 8.1.0.
• Vungle SDK version 6.9.1.

Version 6.8.1.0

• Verified compatibility with Vungle SDK 6.8.1.
• Now requires Google Mobile Ads SDK version 7.66.0 or higher.

Built and tested with

• Google Mobile Ads SDK version 7.66.0.
• Vungle SDK version 6.8.1.

Version 6.8.0.0

• Verified compatibility with Vungle SDK 6.8.0.
• Now requires Google Mobile Ads SDK version 7.65.0 or higher.

Built and tested with

• Google Mobile Ads SDK version 7.65.0.
• Vungle SDK version 6.8.0.

Version 6.7.1.0

• Verified compatibility with Vungle SDK 6.7.1.
• Now requires Google Mobile Ads SDK version 7.64.0 or higher.
• Fixed an issue where didFailToPresentWithError: was not called when a rewarded ad failed to present.

Built and tested with

• Google Mobile Ads SDK version 7.64.0.
• Vungle SDK version 6.7.1.

Version 6.7.0.0

• Verified compatibility with Vungle SDK 6.7.0.
• Now requires Google Mobile Ads SDK version 7.62.0 or higher.
• Added support for playing multiple banner ads at the same time.
• Clicks now reported when the click happens instead of when the ad is closed.
• Banner and interstitial ads now forward the willLeaveApplication callback.

Built and tested with

• Google Mobile Ads SDK version 7.62.0.
• Vungle SDK version 6.7.0.

Version 6.5.3.0

• Verified compatibility with Vungle SDK 6.5.3.
• Now requires Google Mobile Ads SDK version 7.58.0 or higher.
• Added support for Smart and Adaptive Banner ads.
• Added support for Banner (320x50, 300x50, 728x90) ads.
• Added video orientation option when play ads.
• Fix a bug where failed to call report_ad after the first refresh.
• Fix ad availability delays issue with longer waterfall.
• Remove support for i386 architecture.

Built and tested with

• Google Mobile Ads SDK version 7.58.0.
• Vungle SDK version 6.5.3.

Version 6.4.6.0

• Verified compatibility with Vungle SDK 6.4.6.
• Added support for banner (MREC) ads.
• Fixed a bug where didReceiveInterstitial: callback is called more than once.
• Removed callbacks to adapterWillLeaveApplication, which were previously not invoked at the correct time.

Built and tested with

• Google Mobile Ads SDK version 7.52.0.
• Vungle SDK version 6.4.6.

Version 6.3.2.3

• Fixed a crash in [GADMAdapterVungleRewardedAd adAvailable:].

Version 6.3.2.2

• Fixed a bug where the Vungle adapter would never load rewarded ads if Vungle SDK initialization failed. Now, the adapter will try to re-initialize the Vungle SDK on subsequent rewarded ad requests.
• Now requires Google Mobile Ads SDK version 7.42.2 or higher.

Version 6.3.2.1

• Updated the adapter to use new rewarded API.
• Now requires Google Mobile Ads SDK version 7.41.0 or higher.

Version 6.3.2.0

• Verified compatibility with Vungle SDK 6.3.2.

Version 6.3.0.0

• Verified compatibility with Vungle SDK 6.3.0.
• Updated updateConsentStatus method to updateConsentStatus:consentMessageVersion: in VungleRouterConsent class.

Version 6.2.0.3

• Added adapterDidCompletePlayingRewardBasedVideoAd: callback to the adapter.

Version 6.2.0.2

• Added VungleRouterConsent class which contains updateConsentStatus and getConsentStatus methods.

Version 6.2.0.1

• Updated Vungle SDK initializer correctly.

Version 6.2.0.0

• Verified compatibility with Vungle SDK 6.2.0.

Version 5.4.0.0

• Verified compatibility with Vungle SDK 5.4.0.
• Updated adapter to correctly report clicks to the Google Mobile Ads SDK.

Version 5.3.2.0

• Added two new extras to VungleAdNetworkExtras:
  • ordinal - An integer indicating the order in which this ad was shown in the game session.
  • flexViewAutoDismissSeconds - Sets Flex View ads to automatically close in the specified amount of seconds.
• Verified compatibility with Vungle SDK 5.3.2.

Version 5.3.0.0

• Updated the deployment target to iOS 8.
• Verified compatibility with Vungle SDK 5.3.0.

Version 5.2.0.0

• Verified compatibility with Vungle SDK 5.2.0.

Version 5.1.1.0

• Verified compatibility with Vungle SDK 5.1.1.

Version 5.1.0.0

• Verified compatibility with Vungle SDK 5.1.0.

Earlier versions

• Added support for interstitial and rewarded video ad formats.