দিকনির্দেশ API-এর মাধ্যমে দিকনির্দেশ পাওয়া

Required parameters

• destination

  The place ID, address, or textual latitude/longitude value to which you wish to calculate directions. The options for the destination parameter are the same as for the origin parameter.

• origin

  The place ID, address, or textual latitude/longitude value from which you wish to calculate directions.

  • Place IDs must be prefixed with place_id: . You can retrieve place IDs from the Geocoding API and the Places API (including Place Autocomplete). For an example using place IDs from Place Autocomplete, see Place Autocomplete and Directions . For more about place IDs, see the Place ID overview .

    origin=place_id:ChIJ3S-JXmauEmsRUcIaWtf4MzE
    

  • If you pass an address, the Directions service geocodes the string and converts it to a latitude/longitude coordinate to calculate directions. This coordinate may be different from that returned by the Geocoding API, for example a building entrance rather than its center.

    origin=24+Sussex+Drive+Ottawa+ON
    

    Using place IDs is preferred over using addresses or latitude/longitude coordinates. Using coordinates will always result in the point being snapped to the road nearest to those coordinates - which may not be an access point to the property, or even a road that will quickly or safely lead to the destination.

  • If you pass coordinates, the point will snap to the nearest road. Passing a place ID is preferred. If you do pass coordinates, ensure that no space exists between the latitude and longitude values.

    origin=41.43206,-81.38992
    

  • Plus codes must be formatted as a global code or a compound code. Format plus codes as shown here (plus signs are url-escaped to %2B and spaces are url-escaped to %20 ).

    • Global code is a 4 character area code and 6 character or longer local code (849VCWC8+R9 is 849VCWC8%2BR9 ).
    • Compound code is a 6 character or longer local code with an explicit location (CWC8+R9 Mountain View, CA, USA is CWC8%2BR9%20Mountain%20View%20CA%20USA ).
  Note: For efficiency and accuracy, use place ID's when possible. These ID's are uniquely explicit like a lat/lng value pair and provide geocoding benefits for routing such as access points and traffic variables. Unlike an address, ID's do not require the service to perform a search or an intermediate request for place details; therefore, performance is better.

Optional parameters

• alternatives

  If set to true , specifies that the Directions service may provide more than one route alternative in the response. Note that providing route alternatives may increase the response time from the server. This is only available for requests without intermediate waypoints. For more information, see the guide to waypoints .

• arrival_time

  Specifies the desired time of arrival for transit directions, in seconds since midnight, January 1, 1970 UTC. You can specify either departure_time or arrival_time , but not both. Note that arrival_time must be specified as an integer.

• avoid

  Indicates that the calculated route(s) should avoid the indicated features. This parameter supports the following arguments:

  • tolls indicates that the calculated route should avoid toll roads/bridges.
  • highways indicates that the calculated route should avoid highways.
  • ferries indicates that the calculated route should avoid ferries.
  • indoor indicates that the calculated route should avoid indoor steps for walking and transit directions.

  It's possible to request a route that avoids any combination of tolls, highways and ferries by passing multiple restrictions to the avoid parameter. For example:

  avoid=tolls|highways|ferries.
  

• departure_time

  Specifies the desired time of departure. You can specify the time as an integer in seconds since midnight, January 1, 1970 UTC. If a departure_time later than 9999-12-31T23:59:59.999999999Z is specified, the API will fall back the departure_time to 9999-12-31T23:59:59.999999999Z. Alternatively, you can specify a value of now, which sets the departure time to the current time (correct to the nearest second). The departure time may be specified in two cases:

  • For requests where the travel mode is transit: You can optionally specify one of departure_time or arrival_time . If neither time is specified, the departure_time defaults to now (that is, the departure time defaults to the current time).
  • For requests where the travel mode is driving: You can specify the departure_time to receive a route and trip duration (response field: duration_in_traffic) that take traffic conditions into account. The departure_time must be set to the current time or some time in the future. It cannot be in the past.
  Note: If departure time is not specified, choice of route and duration are based on road network and average time-independent traffic conditions. Results for a given request may vary over time due to changes in the road network, updated average traffic conditions, and the distributed nature of the service. Results may also vary between nearly-equivalent routes at any time or frequency.
  Note: Distance Matrix requests specifying `departure_time` when `mode=driving` are limited to a maximum of 100 elements per request. The number of origins times the number of destinations defines the number of elements.

• language

  The language in which to return results. Note that this applies only to the geocoded addresses in start_address and end_address , the localized text in distance and duration fields (in legs and steps), and the description of maneuvers in html_instructions , but not to the names and addresses in html_instructions , which are formatted in their local language and script.

  • See the list of supported languages . Google often updates the supported languages, so this list may not be exhaustive.
  • If language is not supplied, the API attempts to use the preferred language as specified in the Accept-Language header.
  • The API does its best to provide a street address that is readable for both the user and locals. To achieve that goal, it returns street addresses in the local language, transliterated to a script readable by the user if necessary, observing the preferred language. All other addresses are returned in the preferred language. Address components are all returned in the same language, which is chosen from the first component.
  • If a name is not available in the preferred language, the API uses the closest match.
  • The preferred language has a small influence on the set of results that the API chooses to return, and the order in which they are returned. The geocoder interprets abbreviations differently depending on language, such as the abbreviations for street types, or synonyms that may be valid in one language but not in another. For example, utca and tér are synonyms for street in Hungarian.

• mode

  For the calculation of distances and directions, you may specify the transportation mode to use. By default, driving mode is used. By default, directions are calculated as driving directions. The following travel modes are supported:

  • driving (default) indicates standard driving directions or distance using the road network.
  • walking requests walking directions or distance via pedestrian paths & sidewalks (where available).
  • bicycling requests bicycling directions or distance via bicycle paths & preferred streets (where available).
  • transit requests directions or distance via public transit routes (where available). If you set the mode to transit, you can optionally specify either a departure_time or an arrival_time . If neither time is specified, the departure_time defaults to now (that is, the departure time defaults to the current time). You can also optionally include a transit_mode and/or a transit_routing_preference .
  Note: Both walking and bicycling directions may sometimes not include clear pedestrian or bicycling paths, so these directions will return warnings in the returned result which you must display to the user.

• region

  The region code, specified as a ccTLD ("top-level domain") two-character value. Most ccTLD codes are identical to ISO 3166-1 codes, with some notable exceptions. For example, the United Kingdom's ccTLD is "uk" (.co.uk) while its ISO 3166-1 code is "gb" (technically for the entity of "The United Kingdom of Great Britain and Northern Ireland").

• traffic_model

  Specifies the assumptions to use when calculating time in traffic. This setting affects the value returned in the duration_in_traffic field in the response, which contains the predicted time in traffic based on historical averages. The traffic_model parameter may only be specified for driving directions where the request includes a departure_time . The available values for this parameter are:

  • best_guess (default) indicates that the returned duration_in_traffic should be the best estimate of travel time given what is known about both historical traffic conditions and live traffic. Live traffic becomes more important the closer the departure_time is to now.
  • pessimistic indicates that the returned duration_in_traffic should be longer than the actual travel time on most days, though occasional days with particularly bad traffic conditions may exceed this value.
  • optimistic indicates that the returned duration_in_traffic should be shorter than the actual travel time on most days, though occasional days with particularly good traffic conditions may be faster than this value.

  The default value of best_guess will give the most useful predictions for the vast majority of use cases. It is possible the best_guess travel time prediction may be shorter than optimistic , or alternatively, longer than pessimistic , due to the way the best_guess prediction model integrates live traffic information.

• transit_mode

  Specifies one or more preferred modes of transit. This parameter may only be specified for transit directions. The parameter supports the following arguments:

  • bus indicates that the calculated route should prefer travel by bus.
  • subway indicates that the calculated route should prefer travel by subway.
  • train indicates that the calculated route should prefer travel by train.
  • tram indicates that the calculated route should prefer travel by tram and light rail.
  • rail indicates that the calculated route should prefer travel by train, tram, light rail, and subway. This is equivalent to transit_mode=train|tram|subway .

• transit_routing_preference

  Specifies preferences for transit routes. Using this parameter, you can bias the options returned, rather than accepting the default best route chosen by the API. This parameter may only be specified for transit directions. The parameter supports the following arguments:

  • less_walking indicates that the calculated route should prefer limited amounts of walking.
  • fewer_transfers indicates that the calculated route should prefer a limited number of transfers.

• units

  Specifies the unit system to use when displaying results.

  Directions results contain text within distance fields that may be displayed to the user to indicate the distance of a particular "step" of the route. By default, this text uses the unit system of the origin's country or region.

  For example, a route from "Chicago, IL" to "Toronto, ONT" will display results in miles, while the reverse route will display results in kilometers. You may override this unit system by setting one explicitly within the request's units parameter, passing one of the following values:

  • metric specifies usage of the metric system. Textual distances are returned using kilometers and meters.
  • imperial specifies usage of the Imperial (English) system. Textual distances are returned using miles and feet.
  Note: this unit system setting only affects the text displayed within distance fields. The distance fields also contain values which are always expressed in meters.

• waypoints

  Caution: Requests using more than 10 waypoints (between 11 and 25), or waypoint optimization, are billed at a higher rate. Learn more about billing for Google Maps Platform products.

  Specifies an array of intermediate locations to include along the route between the origin and destination points as pass through or stopover locations. Waypoints alter a route by directing it through the specified location(s). The API supports waypoints for these travel modes: driving, walking and bicycling; not transit. You can supply one or more locations separated by the pipe character ( | or %7C ), in the form of a place ID, an address, or latitude/longitude coordinates. By default, the Directions service calculates a route using the waypoints in the order they are given. The precedence for parsing the value of the waypoint is place ID, latitude/longitude coordinates, then address.

  • If you pass a place ID, you must prefix it with place_id: . You can retrieve place IDs from the Geocoding API and the Places API (including Place Autocomplete). For an example using place IDs from Place Autocomplete, see Place Autocomplete and Directions . For more about place IDs, see the Place ID overview .
    For efficiency and accuracy, use place ID's when possible. These ID's are uniquely explicit like a lat/lng value pair and provide geocoding benefits for routing such as access points and traffic variables. Unlike an address, ID's do not require the service to perform a search or an intermediate request for place details; therefore, performance is better.
  • If you pass latitude/longitude coordinates, the values go directly to the front-end server to calculate directions without geocoding. The points are snapped to roads and might not provide the accuracy your app needs. Use coordinates when you are confident the values truly specify the points your app needs for routing without regard to possible access points or additional geocoding details. Ensure that a comma ( %2C ) and not a space ( %20 ) separates the latitude and longitude values.
  • If you pass an address, the Directions service will geocode the string and convert it into latitude/longitude coordinates to calculate directions. If the address value is ambiguous, the value might evoke a search to disambiguate from similar addresses. For example, "1st Street" could be a complete value or a partial value for "1st street NE" or "1st St SE". This result may be different from that returned by the Geocoding API. You can avoid possible misinterpretations using place IDs.
  • Alternatively, you can supply an encoded set of points using the Encoded Polyline Algorithm . You will find an encoded set is useful for a large number of waypoints, because the URL is significantly shorter. All web services have a URL limit of 16384 characters.
    • Encoded polylines must be prefixed with enc: and followed by a colon ( : ). For example: waypoints=enc:gfo}EtohhU: .
    • You can also include multiple encoded polylines, separated by the pipe character ( | ). For example, waypoints=via:enc:wc~oAwquwMdlTxiKtqLyiK:|enc:c~vnAamswMvlTor@tjGi}L:| via:enc:udymA{~bxM:

  Influence routes with stopover and pass through points

  For each waypoint in the request, the directions response appends an entry to the legs array to provide the details for stopovers on that leg of the journey.

  If you'd like to influence the route using waypoints without adding a stopover, add the prefix via: to the waypoint. Waypoints prefixed with via: will not add an entry to the legs array, but will route the journey through the waypoint.

  The following URL modifies the previous request such that the journey is routed through Lexington without stopping:

  https://maps.googleapis.com/maps/api/directions/json?
  origin=Boston,MA&destination=Concord,MA
  &waypoints=Charlestown,MA|via:Lexington,MA
  

  The via: prefix is most effective when creating routes in response to the user dragging the waypoints on the map. Doing so allows the user to see how the final route may look in real-time and helps ensure that waypoints are placed in locations that are accessible to the Directions API.

  Caution: Using the `via:` prefix to avoid stopovers results in directions that are strict in their interpretation of the waypoint. This interpretation may result in severe detours on the route or `ZERO_RESULTS` in the response status code if the Directions API is unable to create directions through that point.

  Optimize your waypoints

  By default, the Directions service calculates a route through the provided waypoints in their given order. Optionally, you may pass optimize:true as the first argument within the waypoints parameter to allow the Directions service to optimize the provided route by rearranging the waypoints in a more efficient order. (This optimization is an application of the traveling salesperson problem.) Travel time is the primary factor which is optimized, but other factors such as distance, number of turns and many more may be taken into account when deciding which route is the most efficient. All waypoints must be stopovers for the Directions service to optimize their route.

  If you instruct the Directions service to optimize the order of its waypoints, their order will be returned in the waypoint_order field within the routes object. The waypoint_order field returns values which are zero-based.

  The following example calculates a road journey from Adelaide, South Australia to each of South Australia's main wine regions using route optimization.

  https://maps.googleapis.com/maps/api/directions/json?
  origin=Adelaide,SA&destination=Adelaide,SA
  &waypoints=optimize:true|Barossa+Valley,SA|Clare,SA|Connawarra,SA|McLaren+Vale,SA
  

  Inspection of the calculated route will indicate that calculation uses waypoints in the following waypoint order:

  "waypoint_order": [ 3, 2, 0, 1 ]
  

  Caution: Requests using waypoint optimization are billed at a higher rate. Learn more about how Google Maps Platform products are billed.

DirectionsResponse

DirectionsRoute

Routes consist of nested legs and steps .

Bounds

A rectangle in geographical coordinates from points at the southwest and northeast corners.

LatLngLiteral

An object describing a specific location with Latitude and Longitude in decimal degrees.

DirectionsLeg

DirectionsStep

Each element in the steps array defines a single step of the calculated directions. A step is the most atomic unit of a direction's route, containing a single step describing a specific, single instruction on the journey. E.g. "Turn left at W. 4th St." The step not only describes the instruction but also contains distance and duration information relating to how this step relates to the following step. For example, a step denoted as "Merge onto I-80 West" may contain a duration of "37 miles" and "40 minutes," indicating that the next step is 37 miles/40 minutes from this step.

When using the Directions API to search for transit directions, the steps array will include additional transit details in the form of a transit_details array. If the directions include multiple modes of transportation, detailed directions will be provided for walking or driving steps in an inner steps array. For example, a walking step will include directions from the start and end locations: "Walk to Innes Ave & Fitch St". That step will include detailed walking directions for that route in the inner steps array, such as: "Head north-west", "Turn left onto Arelious Walker", and "Turn left onto Innes Ave".

TextValueObject

An object containing a numeric value and its formatted text representation.

DirectionsPolyline

Polyline encoding is a lossy compression algorithm that allows you to store a series of coordinates as a single string. Point coordinates are encoded using signed values. If you only have a few static points, you may also wish to use the interactive polyline encoding utility.

The encoding process converts a binary value into a series of character codes for ASCII characters using the familiar base64 encoding scheme: to ensure proper display of these characters, encoded values are summed with 63 (the ASCII character '?') before converting them into ASCII. The algorithm also checks for additional character codes for a given point by checking the least significant bit of each byte group; if this bit is set to 1, the point is not yet fully formed and additional data must follow.

Additionally, to conserve space, points only include the offset from the previous point (except of course for the first point). All points are encoded in Base64 as signed integers, as latitudes and longitudes are signed values. The encoding format within a polyline needs to represent two coordinates representing latitude and longitude to a reasonable precision. Given a maximum longitude of +/- 180 degrees to a precision of 5 decimal places (180.00000 to -180.00000), this results in the need for a 32 bit signed binary integer value.

TravelMode

• DRIVING (default) indicates calculation using the road network.
• BICYCLING requests calculation for bicycling via bicycle paths & preferred streets (where available).
• TRANSIT requests calculation via public transit routes (where available).
• WALKING requests calculation for walking via pedestrian paths & sidewalks (where available).

DirectionsTransitDetails

Additional information that is not relevant for other modes of transportation.

DirectionsTransitStop

TimeZoneTextValueObject

An object containing Unix time, a time zone, and its formatted text representation.

DirectionsTransitLine

DirectionsTransitAgency

DirectionsTransitVehicle

DirectionsTrafficSpeedEntry

DirectionsViaWaypoint

Fare

The total fare for the route.

{
  "currency" : "USD",
  "value" : 6,
  "text" : "$6.00"
}

DirectionsStatus

The status field within the Directions response object contains the status of the request, and may contain debugging information to help you track down why the Directions service failed. The status field may contain the following values:

• OK indicates the response contains a valid result.
• NOT_FOUND indicates at least one of the locations specified in the request's origin, destination, or waypoints could not be geocoded.
• ZERO_RESULTS indicates no route could be found between the origin and destination.
• MAX_WAYPOINTS_EXCEEDED indicates that too many waypoints were provided in the request. For applications using the Directions API as a web service, or the directions service in the Maps JavaScript API, the maximum allowed number of waypoints is 25, plus the origin and destination.
• MAX_ROUTE_LENGTH_EXCEEDED indicates the requested route is too long and cannot be processed. This error occurs when more complex directions are returned. Try reducing the number of waypoints, turns, or instructions.
• INVALID_REQUEST indicates that the provided request was invalid. Common causes of this status include an invalid parameter or parameter value.
• OVER_DAILY_LIMIT indicates any of the following:
  • The API key is missing or invalid.
  • Billing has not been enabled on your account.
  • A self-imposed usage cap has been exceeded.
  • The provided method of payment is no longer valid (for example, a credit card has expired).
  See the Maps FAQ to learn how to fix this.
• OVER_QUERY_LIMIT indicates the service has received too many requests from your application within the allowed time period.
• REQUEST_DENIED indicates that the service denied use of the directions service by your application.
• UNKNOWN_ERROR indicates a directions request could not be processed due to a server error. The request may succeed if you try again.

DirectionsGeocodedWaypoint