إنشاء تقرير

يشرح هذا الدليل كيفية إنشاء تقرير أساسي لبيانات "إحصاءات Google" باستخدام الإصدار 1 من Google Analytics Data API. تشبه التقارير من الإصدار 1 من Data API التقارير التي يمكنك إنشاؤها في قسم التقارير من واجهة مستخدم "إحصاءات Google".

يتناول هذا الدليل إعداد التقارير الأساسية، وهي ميزة إعداد التقارير العامة في Data API. يتضمّن الإصدار الأول من Data API أيضًا إعداد تقارير متخصّصة في الوقت الفعلي وإعداد تقارير مسارات الإحالات الناجحة.

runReport هي الطريقة الموصى بها لطلبات البحث، ويتم استخدامها في جميع الأمثلة خلال هذا الدليل. اطّلع على الميزات المتقدمة للحصول على نظرة عامة على الطرق الأساسية الأخرى لإعداد التقارير. استخدِم مستكشف طلبات البحث لاختبار طلباتك.

Reports overview

التقارير هي جداول تتضمّن بيانات الأحداث لموقع على "إحصاءات Google 4". يحتوي كل جدول تقرير على السمات والمقاييس المطلوبة في طلب بحثك، مع بيانات في صفوف فردية.

استخدِم الفلاتر لعرض الصفوف التي تتطابق مع شرط معيّن فقط، وتقسيم النتائج على عدّة صفحات للتنقل بين النتائج.

في ما يلي نموذج جدول تقرير يعرض سمة واحدة (Country) ومقياسًا واحدًا (activeUsers):

تحديد مصدر بيانات

يتطلّب كل طلب runReport تحديد رقم تعريف موقع على "إحصاءات Google 4". ويتمّ استخدام موقع "إحصاءات Google" الذي تحدّده كمجموعة بيانات لطلب البحث هذا. وفي ما يلي مثال لذلك:

POST https://analyticsdata.googleapis.com/v1beta/properties/GA4_PROPERTY_ID:runReport

لا يتضمن الردّ من هذا الطلب سوى بيانات من موقع "إحصاءات Google" الذي تحدِّده على أنّه GA4_PROPERTY_ID.

إذا كنت تستخدم مكتبات عملاء واجهة برمجة التطبيقات، حدِّد مصدر البيانات في المعلَمة property على شكل properties/GA4_PROPERTY_ID. راجِع دليل البدء السريع للاطّلاع على أمثلة حول استخدام مكتبات العملاء.

اطّلِع على إرسال أحداث Measurement Protocol إلى "إحصاءات Google" إذا كنت تريد تضمين أحداث Measurement Protocol في تقاريرك.

إنشاء تقرير

لإنشاء تقرير، أنشِئ عنصر RunReportRequest. ننصح بالبدء بالمَعلمات التالية:

• إدخال صالح في الحقل dateRanges.
• إدخال واحد صالح على الأقل في الحقل dimensions.
• إدخال واحد صالح على الأقل في الحقل metrics.

إليك نموذج طلب يتضمّن الحقول المقترَحة:

POST https://analyticsdata.googleapis.com/v1beta/properties/GA4_PROPERTY_ID:runReport
  {
    "dateRanges": [{ "startDate": "2023-09-01"", "endDate": "2023-09-15" }],
    "dimensions": [{ "name": "country" }],
    "metrics": [{ "name": "activeUsers" }]
  }

import com.google.analytics.data.v1beta.BetaAnalyticsDataClient;
import com.google.analytics.data.v1beta.DateRange;
import com.google.analytics.data.v1beta.Dimension;
import com.google.analytics.data.v1beta.DimensionHeader;
import com.google.analytics.data.v1beta.Metric;
import com.google.analytics.data.v1beta.MetricHeader;
import com.google.analytics.data.v1beta.Row;
import com.google.analytics.data.v1beta.RunReportRequest;
import com.google.analytics.data.v1beta.RunReportResponse;

/**
 * Google Analytics Data API sample application demonstrating the creation of a basic report.
 *
 * <p>See
 * https://developers.google.com/analytics/devguides/reporting/data/v1/rest/v1beta/properties/runReport
 * for more information.
 *
 * <p>Before you start the application, please review the comments starting with "TODO(developer)"
 * and update the code to use correct values.
 *
 * <p>To run this sample using Maven:
 *
 * <pre>{@code
 * cd google-analytics-data
 * mvn compile exec:java -Dexec.mainClass="com.google.analytics.data.samples.RunReportSample"
 * }</pre>
 */
public class RunReportSample {

  public static void main(String... args) throws Exception {
    /**
     * TODO(developer): Replace this variable with your Google Analytics 4 property ID before
     * running the sample.
     */
    String propertyId = "YOUR-GA4-PROPERTY-ID";
    sampleRunReport(propertyId);
  }

  // Runs a report of active users grouped by country.
  static void sampleRunReport(String propertyId) throws Exception {

    // Using a default constructor instructs the client to use the credentials
    // specified in GOOGLE_APPLICATION_CREDENTIALS environment variable.
    try (BetaAnalyticsDataClient analyticsData = BetaAnalyticsDataClient.create()) {
      RunReportRequest request =
          RunReportRequest.newBuilder()
              .setProperty("properties/" + propertyId)
              .addDimensions(Dimension.newBuilder().setName("country"))
              .addMetrics(Metric.newBuilder().setName("activeUsers"))
              .addDateRanges(
                  DateRange.newBuilder().setStartDate("2020-09-01").setEndDate("2020-09-15"))
              .build();

      // Make the request.
      RunReportResponse response = analyticsData.runReport(request);
      printRunResponseResponse(response);
    }
  }

  // Prints results of a runReport call.
  static void printRunResponseResponse(RunReportResponse response) {
    System.out.printf("%s rows received%n", response.getRowsList().size());

    for (DimensionHeader header : response.getDimensionHeadersList()) {
      System.out.printf("Dimension header name: %s%n", header.getName());
    }

    for (MetricHeader header : response.getMetricHeadersList()) {
      System.out.printf("Metric header name: %s (%s)%n", header.getName(), header.getType());
    }

    System.out.println("Report result:");
    for (Row row : response.getRowsList()) {
      System.out.printf(
          "%s, %s%n", row.getDimensionValues(0).getValue(), row.getMetricValues(0).getValue());
    }
  }
}
RunReportSample.java

from google.analytics.data_v1beta import BetaAnalyticsDataClient
from google.analytics.data_v1beta.types import (
    DateRange,
    Dimension,
    Metric,
    MetricType,
    RunReportRequest,
)


def run_sample():
    """Runs the sample."""
    # TODO(developer): Replace this variable with your Google Analytics 4
    #  property ID before running the sample.
    property_id = "YOUR-GA4-PROPERTY-ID"
    run_report(property_id)


def run_report(property_id="YOUR-GA4-PROPERTY-ID"):
    """Runs a report of active users grouped by country."""
    client = BetaAnalyticsDataClient()

    request = RunReportRequest(
        property=f"properties/{property_id}",
        dimensions=[Dimension(name="country")],
        metrics=[Metric(name="activeUsers")],
        date_ranges=[DateRange(start_date="2020-09-01", end_date="2020-09-15")],
    )
    response = client.run_report(request)
    print_run_report_response(response)


def print_run_report_response(response):
    """Prints results of a runReport call."""
    print(f"{response.row_count} rows received")
    for dimensionHeader in response.dimension_headers:
        print(f"Dimension header name: {dimensionHeader.name}")
    for metricHeader in response.metric_headers:
        metric_type = MetricType(metricHeader.type_).name
        print(f"Metric header name: {metricHeader.name} ({metric_type})")

    print("Report result:")
    for rowIdx, row in enumerate(response.rows):
        print(f"\nRow {rowIdx}")
        for i, dimension_value in enumerate(row.dimension_values):
            dimension_name = response.dimension_headers[i].name
            print(f"{dimension_name}: {dimension_value.value}")

        for i, metric_value in enumerate(row.metric_values):
            metric_name = response.metric_headers[i].name
            print(f"{metric_name}: {metric_value.value}")

run_report.py

طلب بحث عن المقاييس

Metrics هي المقاييس الكمية لبيانات فعالياتك. يجب تحديد مقياس واحد على الأقل في طلبات runReport.

اطّلِع على مقاييس واجهة برمجة التطبيقات للحصول على قائمة كاملة بالمقاييس التي يمكنك طلبها.

في ما يلي نموذج طلب يعرض ثلاثة مقاييس مجمّعة حسب السمة date:

POST https://analyticsdata.googleapis.com/v1beta/properties/GA4_PROPERTY_ID:runReport
  {
    "dateRanges": [{ "startDate": "7daysAgo", "endDate": "yesterday" }],
    "dimensions": [{ "name": "date" }],
    "metrics": [
      {
        "name": "activeUsers"
      },
      {
        "name": "newUsers"
      },
      {
        "name": "totalRevenue"
      }
    ],
  }

import com.google.analytics.data.v1beta.BetaAnalyticsDataClient;
import com.google.analytics.data.v1beta.DateRange;
import com.google.analytics.data.v1beta.Dimension;
import com.google.analytics.data.v1beta.Metric;
import com.google.analytics.data.v1beta.RunReportRequest;
import com.google.analytics.data.v1beta.RunReportResponse;

/**
 * Google Analytics Data API sample application demonstrating the creation of a basic report.
 *
 * <p>See
 * https://developers.google.com/analytics/devguides/reporting/data/v1/rest/v1beta/properties/runReport
 * for more information.
 *
 * <p>Before you start the application, please review the comments starting with "TODO(developer)"
 * and update the code to use correct values.
 *
 * <p>To run this sample using Maven:
 *
 * <pre>{@code
 * cd google-analytics-data
 * mvn compile exec:java -Dexec.mainClass="com.google.analytics.data.samples.RunReportWithMultipleMetricsSample"
 * }</pre>
 */
public class RunReportWithMultipleMetricsSample {

  public static void main(String... args) throws Exception {
    // TODO(developer): Replace with your Google Analytics 4 property ID before running the sample.
    String propertyId = "YOUR-GA4-PROPERTY-ID";
    sampleRunReportWithMultipleMetrics(propertyId);
  }

  // Runs a report of active users, new users and total revenue grouped by date dimension.
  static void sampleRunReportWithMultipleMetrics(String propertyId) throws Exception {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. After completing all of your requests, call
    // the "close" method on the client to safely clean up any remaining background resources.
    try (BetaAnalyticsDataClient analyticsData = BetaAnalyticsDataClient.create()) {
      RunReportRequest request =
          RunReportRequest.newBuilder()
              .setProperty("properties/" + propertyId)
              .addDimensions(Dimension.newBuilder().setName("date"))
              .addMetrics(Metric.newBuilder().setName("activeUsers"))
              .addMetrics(Metric.newBuilder().setName("newUsers"))
              .addMetrics(Metric.newBuilder().setName("totalRevenue"))
              .addDateRanges(DateRange.newBuilder().setStartDate("7daysAgo").setEndDate("today"))
              .build();

      // Make the request.
      RunReportResponse response = analyticsData.runReport(request);
      // Prints the response using a method in RunReportSample.java
      RunReportSample.printRunResponseResponse(response);
    }
  }
}
RunReportWithMultipleMetricsSample.java

from google.analytics.data_v1beta import BetaAnalyticsDataClient
from google.analytics.data_v1beta.types import (
    DateRange,
    Dimension,
    Metric,
    RunReportRequest,
)

from run_report import print_run_report_response


def run_sample():
    """Runs the sample."""
    # TODO(developer): Replace this variable with your Google Analytics 4
    #  property ID before running the sample.
    property_id = "YOUR-GA4-PROPERTY-ID"
    run_report_with_multiple_metrics(property_id)


def run_report_with_multiple_metrics(property_id="YOUR-GA4-PROPERTY-ID"):
    """Runs a report of active users, new users and total revenue grouped by
    date dimension."""
    client = BetaAnalyticsDataClient()

    # Runs a report of active users grouped by three dimensions.
    request = RunReportRequest(
        property=f"properties/{property_id}",
        dimensions=[Dimension(name="date")],
        metrics=[
            Metric(name="activeUsers"),
            Metric(name="newUsers"),
            Metric(name="totalRevenue"),
        ],
        date_ranges=[DateRange(start_date="7daysAgo", end_date="today")],
    )
    response = client.run_report(request)
    print_run_report_response(response)

run_report_with_multiple_metrics.py

إليك نموذج رد يُظهر 1135 مستخدمًا نشطًا و512 مستخدمًا جديدًا و73.0841 إجمالي الأرباح بعملة موقعك على "إحصاءات Google" في التاريخ 20231025 (25 تشرين الأول (أكتوبر) 2023).

"rows": [
...
{
  "dimensionValues": [
    {
      "value": "20231025"
    }
  ],
  "metricValues": [
    {
      "value": "1135"
    },
    {
      "value": "512"
    },
    {
      "value": "73.0841"
    }
  ]
},
...
],

قراءة الرد

تحتوي استجابة التقرير على عنوان وصفوف من البيانات. يتكون العنوان من DimensionHeaders وMetricHeaders، واللذين يسردان الأعمدة في التقرير. يتألف كل صف من DimensionValues وMetricValues. يكون ترتيب الأعمدة متسقًا في الطلب والعنوان والصفوف.

إليك نموذج ردّ على الطلب النموذجي السابق:

{
  "dimensionHeaders": [
    {
      "name": "country"
    }
  ],
  "metricHeaders": [
    {
      "name": "activeUsers",
      "type": "TYPE_INTEGER"
    }
  ],
  "rows": [
    {
      "dimensionValues": [
        {
          "value": "Japan"
        }
      ],
      "metricValues": [
        {
          "value": "2541"
        }
      ]
    },
    {
      "dimensionValues": [
        {
          "value": "France"
        }
      ],
      "metricValues": [
        {
          "value": "12"
        }
      ]
    }
  ],
  "metadata": {},
  "rowCount": 2
}

تجميع البيانات وتصفيتها

الأبعاد هي سمات نوعية يمكنك استخدامها لتجميع بياناتك وتصفيتها. على سبيل المثال، تشير السمة city إلى المدينة، مثل Paris أو New York، التي نشأ فيها كل حدث. السمات اختيارية لطلبات runReport، ويمكنك استخدام ما يصل إلى تسع سمات لكل طلب.

اطّلِع على سمات واجهة برمجة التطبيقات للحصول على قائمة كاملة بالسمات التي يمكنك استخدامها لتجميع بياناتك وفلترتها.

مجموعة

في ما يلي نموذج طلب يجمع المستخدِمين النشطين في ثلاثة سمات:

POST https://analyticsdata.googleapis.com/v1beta/properties/GA4_PROPERTY_ID:runReport
  {
    "dateRanges": [{ "startDate": "7daysAgo", "endDate": "yesterday" }],
    "dimensions": [
      {
        "name": "country"
      },
      {
        "name": "region"
      },
      {
        "name": "city"
      }
    ],
    "metrics": [{ "name": "activeUsers" }]
  }
  ```

import com.google.analytics.data.v1beta.BetaAnalyticsDataClient;
import com.google.analytics.data.v1beta.DateRange;
import com.google.analytics.data.v1beta.Dimension;
import com.google.analytics.data.v1beta.Metric;
import com.google.analytics.data.v1beta.RunReportRequest;
import com.google.analytics.data.v1beta.RunReportResponse;

/**
 * Google Analytics Data API sample application demonstrating the creation of a basic report.
 *
 * <p>See
 * https://developers.google.com/analytics/devguides/reporting/data/v1/rest/v1beta/properties/runReport
 * for more information.
 *
 * <p>Before you start the application, please review the comments starting with "TODO(developer)"
 * and update the code to use correct values.
 *
 * <p>To run this sample using Maven:
 *
 * <pre>{@code
 * cd google-analytics-data
 * mvn compile exec:java -Dexec.mainClass="com.google.analytics.data.samples.RunReportWithMultipleDimensionsSample"
 * }</pre>
 */
public class RunReportWithMultipleDimensionsSample {

  public static void main(String... args) throws Exception {
    // TODO(developer): Replace with your Google Analytics 4 property ID before running the sample.
    String propertyId = "YOUR-GA4-PROPERTY-ID";
    sampleRunReportWithMultipleDimensions(propertyId);
  }

  // Runs a report of active users grouped by three dimensions.
  static void sampleRunReportWithMultipleDimensions(String propertyId) throws Exception {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. After completing all of your requests, call
    // the "close" method on the client to safely clean up any remaining background resources.
    try (BetaAnalyticsDataClient analyticsData = BetaAnalyticsDataClient.create()) {
      RunReportRequest request =
          RunReportRequest.newBuilder()
              .setProperty("properties/" + propertyId)
              .addDimensions(Dimension.newBuilder().setName("country"))
              .addDimensions(Dimension.newBuilder().setName("region"))
              .addDimensions(Dimension.newBuilder().setName("city"))
              .addMetrics(Metric.newBuilder().setName("activeUsers"))
              .addDateRanges(DateRange.newBuilder().setStartDate("7daysAgo").setEndDate("today"))
              .build();

      // Make the request.
      RunReportResponse response = analyticsData.runReport(request);
      // Prints the response using a method in RunReportSample.java
      RunReportSample.printRunResponseResponse(response);
    }
  }
}
RunReportWithMultipleDimensionsSample.java

from google.analytics.data_v1beta import BetaAnalyticsDataClient
from google.analytics.data_v1beta.types import (
    DateRange,
    Dimension,
    Metric,
    RunReportRequest,
)

from run_report import print_run_report_response


def run_sample():
    """Runs the sample."""
    # TODO(developer): Replace this variable with your Google Analytics 4
    #  property ID before running the sample.
    property_id = "YOUR-GA4-PROPERTY-ID"
    run_report_with_multiple_dimensions(property_id)


def run_report_with_multiple_dimensions(property_id="YOUR-GA4-PROPERTY-ID"):
    """Runs a report of active users grouped by three dimensions."""
    client = BetaAnalyticsDataClient()

    request = RunReportRequest(
        property=f"properties/{property_id}",
        dimensions=[
            Dimension(name="country"),
            Dimension(name="region"),
            Dimension(name="city"),
        ],
        metrics=[Metric(name="activeUsers")],
        date_ranges=[DateRange(start_date="7daysAgo", end_date="today")],
    )
    response = client.run_report(request)
    print_run_report_response(response)

run_report_with_multiple_dimensions.py

إليك نموذج صف تقرير خاص بالطلب السابق. يوضِّح هذا الصفّ أنّه كان هناك 47 مستخدِمًا نشطًا خلال النطاق الزمني المحدَّد مع أحداث من مدينة كيب تاون، جنوب أفريقيا.

"rows": [
...
{
  "dimensionValues": [
    {
      "value": "South Africa"
    },
    {
      "value": "Western Cape"
    },
    {
      "value": "Cape Town"
    }
  ],
  "metricValues": [
    {
      "value": "47"
    }
  ]
},
...
],

تصفية

يمكنك إنشاء تقارير ببيانات لقيم سمات معيّنة فقط. لفلترة السمات، حدِّد FilterExpression في الحقل dimensionFilter.

في ما يلي مثال يعرض تقرير السلسلة الزمنية eventCount، عندما تكون قيمة eventName هي first_open لكل date :

POST https://analyticsdata.googleapis.com/v1beta/properties/GA4_PROPERTY_ID:runReport
  {
    "dateRanges": [{ "startDate": "7daysAgo", "endDate": "yesterday" }],
    "dimensions": [{ "name": "date" }],
    "metrics": [{ "name": "eventCount" }],
    "dimensionFilter": {
      "filter": {
        "fieldName": "eventName",
        "stringFilter": {
          "value": "first_open"
        }
      }
    },
  }

import com.google.analytics.data.v1beta.BetaAnalyticsDataClient;
import com.google.analytics.data.v1beta.DateRange;
import com.google.analytics.data.v1beta.Dimension;
import com.google.analytics.data.v1beta.Filter;
import com.google.analytics.data.v1beta.FilterExpression;
import com.google.analytics.data.v1beta.Metric;
import com.google.analytics.data.v1beta.RunReportRequest;
import com.google.analytics.data.v1beta.RunReportResponse;

/**
 * Google Analytics Data API sample application demonstrating the usage of dimension and metric
 * filters in a report.
 *
 * <p>See
 * https://developers.google.com/analytics/devguides/reporting/data/v1/rest/v1beta/properties/runReport#body.request_body.FIELDS.dimension_filter
 * for more information.
 *
 * <p>Before you start the application, please review the comments starting with "TODO(developer)"
 * and update the code to use correct values.
 *
 * <p>To run this sample using Maven:
 *
 * <pre>{@code
 * cd google-analytics-data
 * mvn compile exec:java -Dexec.mainClass="com.google.analytics.data.samples.RunReportWithDimensionFilterSample"
 * }</pre>
 */
public class RunReportWithDimensionFilterSample {

  public static void main(String... args) throws Exception {
    // TODO(developer): Replace with your Google Analytics 4 property ID before running the sample.
    String propertyId = "YOUR-GA4-PROPERTY-ID";
    sampleRunReportWithDimensionFilter(propertyId);
  }

  // Runs a report using a dimension filter. The call returns a time series report of `eventCount`
  // when `eventName` is `first_open` for each date.
  // This sample uses relative date range values.
  // See https://developers.google.com/analytics/devguides/reporting/data/v1/rest/v1beta/DateRange
  // for more information.
  static void sampleRunReportWithDimensionFilter(String propertyId) throws Exception {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. After completing all of your requests, call
    // the "close" method on the client to safely clean up any remaining background resources.
    try (BetaAnalyticsDataClient analyticsData = BetaAnalyticsDataClient.create()) {
      RunReportRequest request =
          RunReportRequest.newBuilder()
              .setProperty("properties/" + propertyId)
              .addDimensions(Dimension.newBuilder().setName("date"))
              .addMetrics(Metric.newBuilder().setName("eventCount"))
              .addDateRanges(
                  DateRange.newBuilder().setStartDate("7daysAgo").setEndDate("yesterday"))
              .setDimensionFilter(
                  FilterExpression.newBuilder()
                      .setFilter(
                          Filter.newBuilder()
                              .setFieldName("eventName")
                              .setStringFilter(
                                  Filter.StringFilter.newBuilder().setValue("first_open"))))
              .build();

      // Make the request.
      RunReportResponse response = analyticsData.runReport(request);
      // Prints the response using a method in RunReportSample.java
      RunReportSample.printRunResponseResponse(response);
    }
  }
}
RunReportWithDimensionFilterSample.java

from google.analytics.data_v1beta import BetaAnalyticsDataClient
from google.analytics.data_v1beta.types import (
    DateRange,
    Dimension,
    Filter,
    FilterExpression,
    Metric,
    RunReportRequest,
)

from run_report import print_run_report_response


def run_sample():
    """Runs the sample."""
    # TODO(developer): Replace this variable with your Google Analytics 4
    #  property ID before running the sample.
    property_id = "YOUR-GA4-PROPERTY-ID"
    run_report_with_dimension_filter(property_id)


def run_report_with_dimension_filter(property_id="YOUR-GA4-PROPERTY-ID"):
    """Runs a report using a dimension filter. The call returns a time series
    report of `eventCount` when `eventName` is `first_open` for each date.

    This sample uses relative date range values. See https://developers.google.com/analytics/devguides/reporting/data/v1/rest/v1beta/DateRange
    for more information.
    """

    client = BetaAnalyticsDataClient()

    request = RunReportRequest(
        property=f"properties/{property_id}",
        dimensions=[Dimension(name="date")],
        metrics=[Metric(name="eventCount")],
        date_ranges=[DateRange(start_date="7daysAgo", end_date="yesterday")],
        dimension_filter=FilterExpression(
            filter=Filter(
                field_name="eventName",
                string_filter=Filter.StringFilter(value="first_open"),
            )
        ),
    )
    response = client.run_report(request)
    print_run_report_response(response)

run_report_with_dimension_filter.py

في ما يلي مثال آخر على FilterExpression، حيث لا تتضمّن andGroup سوى البيانات التي تستوفي جميع المعايير في قائمة التعبيرات. يتم اختيار dimensionFilter هذه عندما تكون قيمة browser Chrome وcountryId هي US:

...
"dimensionFilter": {
  "andGroup": {
    "expressions": [
      {
        "filter": {
          "fieldName": "browser",
          "stringFilter": {
            "value": "Chrome"
          }
        }
      },
      {
        "filter": {
          "fieldName": "countryId",
          "stringFilter": {
            "value": "US"
          }
        }
      }
    ]
  }
},
...

import com.google.analytics.data.v1beta.BetaAnalyticsDataClient;
import com.google.analytics.data.v1beta.DateRange;
import com.google.analytics.data.v1beta.Dimension;
import com.google.analytics.data.v1beta.Filter;
import com.google.analytics.data.v1beta.FilterExpression;
import com.google.analytics.data.v1beta.FilterExpressionList;
import com.google.analytics.data.v1beta.Metric;
import com.google.analytics.data.v1beta.RunReportRequest;
import com.google.analytics.data.v1beta.RunReportResponse;

/**
 * Google Analytics Data API sample application demonstrating the usage of dimension and metric
 * filters in a report.
 *
 * <p>See
 * https://developers.google.com/analytics/devguides/reporting/data/v1/rest/v1beta/properties/runReport#body.request_body.FIELDS.dimension_filter
 * for more information.
 *
 * <p>Before you start the application, please review the comments starting with "TODO(developer)"
 * and update the code to use correct values.
 *
 * <p>To run this sample using Maven:
 *
 * <pre>{@code
 * cd google-analytics-data
 * mvn compile exec:java -Dexec.mainClass="com.google.analytics.data.samples.RunReportWithMultipleDimensionFiltersSample"
 * }</pre>
 */
public class RunReportWithMultipleDimensionFiltersSample {

  public static void main(String... args) throws Exception {
    // TODO(developer): Replace with your Google Analytics 4 property ID before running the sample.
    String propertyId = "YOUR-GA4-PROPERTY-ID";
    sampleRunReportWithMultipleDimensionFilters(propertyId);
  }

  // Runs a report using multiple dimension filters joined as `and_group` expression. The filter
  // selects for when both `browser` is `Chrome` and `countryId` is `US`.
  // This sample uses relative date range values.
  // See https://developers.google.com/analytics/devguides/reporting/data/v1/rest/v1beta/DateRange
  // for more information.
  static void sampleRunReportWithMultipleDimensionFilters(String propertyId) throws Exception {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. After completing all of your requests, call
    // the "close" method on the client to safely clean up any remaining background resources.
    try (BetaAnalyticsDataClient analyticsData = BetaAnalyticsDataClient.create()) {
      RunReportRequest request =
          RunReportRequest.newBuilder()
              .setProperty("properties/" + propertyId)
              .addDimensions(Dimension.newBuilder().setName("browser"))
              .addMetrics(Metric.newBuilder().setName("activeUsers"))
              .addDateRanges(
                  DateRange.newBuilder().setStartDate("7daysAgo").setEndDate("yesterday"))
              .setDimensionFilter(
                  FilterExpression.newBuilder()
                      .setAndGroup(
                          FilterExpressionList.newBuilder()
                              .addExpressions(
                                  FilterExpression.newBuilder()
                                      .setFilter(
                                          Filter.newBuilder()
                                              .setFieldName("browser")
                                              .setStringFilter(
                                                  Filter.StringFilter.newBuilder()
                                                      .setValue("Chrome"))))
                              .addExpressions(
                                  FilterExpression.newBuilder()
                                      .setFilter(
                                          Filter.newBuilder()
                                              .setFieldName("countryId")
                                              .setStringFilter(
                                                  Filter.StringFilter.newBuilder()
                                                      .setValue("US"))))))
              .build();

      // Make the request.
      RunReportResponse response = analyticsData.runReport(request);
      // Prints the response using a method in RunReportSample.java
      RunReportSample.printRunResponseResponse(response);
    }
  }
}
RunReportWithMultipleDimensionFiltersSample.java

from google.analytics.data_v1beta import BetaAnalyticsDataClient
from google.analytics.data_v1beta.types import (
    DateRange,
    Dimension,
    Filter,
    FilterExpression,
    FilterExpressionList,
    Metric,
    RunReportRequest,
)

from run_report import print_run_report_response


def run_sample():
    """Runs the sample."""
    # TODO(developer): Replace this variable with your Google Analytics 4
    #  property ID before running the sample.
    property_id = "YOUR-GA4-PROPERTY-ID"
    run_report_with_multiple_dimension_filters(property_id)


def run_report_with_multiple_dimension_filters(property_id="YOUR-GA4-PROPERTY-ID"):
    """Runs a report using multiple dimension filters joined as `and_group`
    expression. The filter selects for when both `browser` is `Chrome` and
    `countryId` is `US`.

    This sample uses relative date range values. See https://developers.google.com/analytics/devguides/reporting/data/v1/rest/v1beta/DateRange
    for more information.
    """
    client = BetaAnalyticsDataClient()

    request = RunReportRequest(
        property=f"properties/{property_id}",
        dimensions=[Dimension(name="browser")],
        metrics=[Metric(name="activeUsers")],
        date_ranges=[DateRange(start_date="7daysAgo", end_date="yesterday")],
        dimension_filter=FilterExpression(
            and_group=FilterExpressionList(
                expressions=[
                    FilterExpression(
                        filter=Filter(
                            field_name="browser",
                            string_filter=Filter.StringFilter(value="Chrome"),
                        )
                    ),
                    FilterExpression(
                        filter=Filter(
                            field_name="countryId",
                            string_filter=Filter.StringFilter(value="US"),
                        )
                    ),
                ]
            )
        ),
    )
    response = client.run_report(request)
    print_run_report_response(response)

run_report_with_multiple_dimension_filters.py

يتضمن orGroup بيانات تفي بأي من المعايير في قائمة التعبيرات.

تستبعد السمة notExpression البيانات التي تتطابق مع تعبيرها الداخلي. إليك الخطأ dimensionFilter الذي يعرض البيانات فقط عندما لا تكون قيمة pageTitle هي My Homepage. يعرض التقرير بيانات الأحداث لكل pageTitle باستثناء My Homepage:

...
"dimensionFilter": {
  "notExpression": {
    "filter": {
      "fieldName": "pageTitle",
      "stringFilter": {
        "value": "My Homepage"
      }
    }
  }
},
...

import com.google.analytics.data.v1beta.BetaAnalyticsDataClient;
import com.google.analytics.data.v1beta.DateRange;
import com.google.analytics.data.v1beta.Dimension;
import com.google.analytics.data.v1beta.Filter;
import com.google.analytics.data.v1beta.FilterExpression;
import com.google.analytics.data.v1beta.Metric;
import com.google.analytics.data.v1beta.RunReportRequest;
import com.google.analytics.data.v1beta.RunReportResponse;

/**
 * Google Analytics Data API sample application demonstrating the usage of dimension and metric
 * filters in a report.
 *
 * <p>See
 * https://developers.google.com/analytics/devguides/reporting/data/v1/rest/v1beta/properties/runReport#body.request_body.FIELDS.dimension_filter
 * for more information.
 *
 * <p>Before you start the application, please review the comments starting with "TODO(developer)"
 * and update the code to use correct values.
 *
 * <p>To run this sample using Maven:
 *
 * <pre>{@code
 * cd google-analytics-data
 * mvn compile exec:java -Dexec.mainClass="com.google.analytics.data.samples.RunReportWithDimensionExcludeFilterSample"
 * }</pre>
 */
public class RunReportWithDimensionExcludeFilterSample {

  public static void main(String... args) throws Exception {
    // TODO(developer): Replace with your Google Analytics 4 property ID before running the sample.
    String propertyId = "YOUR-GA4-PROPERTY-ID";
    sampleRunReportWithDimensionExcludeFilter(propertyId);
  }

  // Runs a report using a filter with `not_expression`. The dimension filter selects for when
  // `pageTitle` is not `My Homepage`.
  // This sample uses relative date range values.
  // See https://developers.google.com/analytics/devguides/reporting/data/v1/rest/v1beta/DateRange
  // for more information.
  static void sampleRunReportWithDimensionExcludeFilter(String propertyId) throws Exception {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. After completing all of your requests, call
    // the "close" method on the client to safely clean up any remaining background resources.
    try (BetaAnalyticsDataClient analyticsData = BetaAnalyticsDataClient.create()) {
      RunReportRequest request =
          RunReportRequest.newBuilder()
              .setProperty("properties/" + propertyId)
              .addDimensions(Dimension.newBuilder().setName("pageTitle"))
              .addMetrics(Metric.newBuilder().setName("sessions"))
              .addDateRanges(
                  DateRange.newBuilder().setStartDate("7daysAgo").setEndDate("yesterday"))
              .setDimensionFilter(
                  FilterExpression.newBuilder()
                      .setNotExpression(
                          FilterExpression.newBuilder()
                              .setFilter(
                                  Filter.newBuilder()
                                      .setFieldName("pageTitle")
                                      .setStringFilter(
                                          Filter.StringFilter.newBuilder()
                                              .setValue("My Homepage")))))
              .build();

      // Make the request.
      RunReportResponse response = analyticsData.runReport(request);
      // Prints the response using a method in RunReportSample.java
      RunReportSample.printRunResponseResponse(response);
    }
  }
}
RunReportWithDimensionExcludeFilterSample.java

from google.analytics.data_v1beta import BetaAnalyticsDataClient
from google.analytics.data_v1beta.types import (
    DateRange,
    Dimension,
    Filter,
    FilterExpression,
    Metric,
    RunReportRequest,
)

from run_report import print_run_report_response


def run_sample():
    """Runs the sample."""
    # TODO(developer): Replace this variable with your Google Analytics 4
    #  property ID before running the sample.
    property_id = "YOUR-GA4-PROPERTY-ID"
    run_report_with_dimension_exclude_filter(property_id)


def run_report_with_dimension_exclude_filter(property_id="YOUR-GA4-PROPERTY-ID"):
    """Runs a report using a filter with `not_expression`. The dimension filter
    selects for when `pageTitle` is not `My Homepage`.

    This sample uses relative date range values. See https://developers.google.com/analytics/devguides/reporting/data/v1/rest/v1beta/DateRange
    for more information.
    """
    client = BetaAnalyticsDataClient()

    request = RunReportRequest(
        property=f"properties/{property_id}",
        dimensions=[Dimension(name="pageTitle")],
        metrics=[Metric(name="sessions")],
        date_ranges=[DateRange(start_date="7daysAgo", end_date="yesterday")],
        dimension_filter=FilterExpression(
            not_expression=FilterExpression(
                filter=Filter(
                    field_name="pageTitle",
                    string_filter=Filter.StringFilter(value="My Homepage"),
                )
            )
        ),
    )
    response = client.run_report(request)
    print_run_report_response(response)

run_report_with_dimension_exclude_filter.py

يطابق inListFilter البيانات لأيّ من القيم في القائمة. في ما يلي dimensionFilter التي تعرض بيانات الأحداث حيث يكون eventName أيًا من purchase وin_app_purchase وapp_store_subscription_renew:

...
"dimensionFilter": {
    "filter": {
      "fieldName": "eventName",
      "inListFilter": {
        "values": ["purchase",
        "in_app_purchase",
        "app_store_subscription_renew"]
      }
    }
  },
...

import com.google.analytics.data.v1beta.BetaAnalyticsDataClient;
import com.google.analytics.data.v1beta.DateRange;
import com.google.analytics.data.v1beta.Dimension;
import com.google.analytics.data.v1beta.Filter;
import com.google.analytics.data.v1beta.FilterExpression;
import com.google.analytics.data.v1beta.Metric;
import com.google.analytics.data.v1beta.RunReportRequest;
import com.google.analytics.data.v1beta.RunReportResponse;
import java.util.ArrayList;

/**
 * Google Analytics Data API sample application demonstrating the usage of dimension and metric
 * filters in a report.
 *
 * <p>See
 * https://developers.google.com/analytics/devguides/reporting/data/v1/rest/v1beta/properties/runReport#body.request_body.FIELDS.dimension_filter
 * for more information.
 *
 * <p>Before you start the application, please review the comments starting with "TODO(developer)"
 * and update the code to use correct values.
 *
 * <p>To run this sample using Maven:
 *
 * <pre>{@code
 * cd google-analytics-data
 * mvn compile exec:java -Dexec.mainClass="com.google.analytics.data.samples.RunReportWithDimensionInListFilterSample"
 * }</pre>
 */
public class RunReportWithDimensionInListFilterSample {

  public static void main(String... args) throws Exception {
    // TODO(developer): Replace with your Google Analytics 4 property ID before running the sample.
    String propertyId = "YOUR-GA4-PROPERTY-ID";
    sampleRunReportWithDimensionInListFilter(propertyId);
  }

  // Runs a report using a dimension filter with `in_list_filter` expression. The filter selects for
  // when `eventName` is set to one of three event names specified in the query.
  // This sample uses relative date range values.
  // See https://developers.google.com/analytics/devguides/reporting/data/v1/rest/v1beta/DateRange
  // for more information.
  static void sampleRunReportWithDimensionInListFilter(String propertyId) throws Exception {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. After completing all of your requests, call
    // the "close" method on the client to safely clean up any remaining background resources.
    try (BetaAnalyticsDataClient analyticsData = BetaAnalyticsDataClient.create()) {
      RunReportRequest request =
          RunReportRequest.newBuilder()
              .setProperty("properties/" + propertyId)
              .addDimensions(Dimension.newBuilder().setName("eventName"))
              .addMetrics(Metric.newBuilder().setName("sessions"))
              .addDateRanges(
                  DateRange.newBuilder().setStartDate("7daysAgo").setEndDate("yesterday"))
              .setDimensionFilter(
                  FilterExpression.newBuilder()
                      .setFilter(
                          Filter.newBuilder()
                              .setFieldName("eventName")
                              .setInListFilter(
                                  Filter.InListFilter.newBuilder()
                                      .addAllValues(
                                          new ArrayList<String>() {
                                            {
                                              add("purchase");
                                              add("in_app_purchase");
                                              add("app_store_subscription_renew");
                                            }
                                          })
                                      .build())))
              .build();

      // Make the request.
      RunReportResponse response = analyticsData.runReport(request);
      // Prints the response using a method in RunReportSample.java
      RunReportSample.printRunResponseResponse(response);
    }
  }
}
RunReportWithDimensionInListFilterSample.java

from google.analytics.data_v1beta import BetaAnalyticsDataClient
from google.analytics.data_v1beta.types import (
    DateRange,
    Dimension,
    Filter,
    FilterExpression,
    Metric,
    RunReportRequest,
)

from run_report import print_run_report_response


def run_sample():
    """Runs the sample."""
    # TODO(developer): Replace this variable with your Google Analytics 4
    #  property ID before running the sample.
    property_id = "YOUR-GA4-PROPERTY-ID"
    run_report_with_dimension_in_list_filter(property_id)


def run_report_with_dimension_in_list_filter(property_id="YOUR-GA4-PROPERTY-ID"):
    """Runs a report using a dimension filter with `in_list_filter` expression.
    The filter selects for when `eventName` is set to one of three event names
    specified in the query.

    This sample uses relative date range values. See https://developers.google.com/analytics/devguides/reporting/data/v1/rest/v1beta/DateRange
    for more information.
    """
    client = BetaAnalyticsDataClient()

    request = RunReportRequest(
        property=f"properties/{property_id}",
        dimensions=[Dimension(name="eventName")],
        metrics=[Metric(name="sessions")],
        date_ranges=[DateRange(start_date="7daysAgo", end_date="yesterday")],
        dimension_filter=FilterExpression(
            filter=Filter(
                field_name="eventName",
                in_list_filter=Filter.InListFilter(
                    values=[
                        "purchase",
                        "in_app_purchase",
                        "app_store_subscription_renew",
                    ]
                ),
            )
        ),
    )
    response = client.run_report(request)
    print_run_report_response(response)

run_report_with_dimension_in_list_filter.py

التنقّل في التقارير الطويلة

يحتوي التقرير تلقائيًا على أول 10,000 صف فقط من بيانات الأحداث. لعرض ما يصل إلى 100,000 صف في التقرير، يمكنك تضمين "limit": 100000 في RunReportRequest.

بالنسبة إلى التقارير التي تحتوي على أكثر من 100,000 صف، عليك إرسال سلسلة من الطلبات وصفحة النتائج. على سبيل المثال، إليك طلب لأول 100,000 صف:

POST https://analyticsdata.googleapis.com/v1beta/properties/GA4_PROPERTY_ID:runReport
  {
    ...
    "limit": 100000,
    "offset": 0
  }

import com.google.analytics.data.v1beta.BetaAnalyticsDataClient;
import com.google.analytics.data.v1beta.DateRange;
import com.google.analytics.data.v1beta.Dimension;
import com.google.analytics.data.v1beta.Metric;
import com.google.analytics.data.v1beta.RunReportRequest;
import com.google.analytics.data.v1beta.RunReportResponse;

/**
 * Google Analytics Data API sample application demonstrating the use of pagination to retrieve
 * large result sets.
 *
 * <p>See
 * https://developers.google.com/analytics/devguides/reporting/data/v1/rest/v1beta/properties/runReport#body.request_body.FIELDS.offset
 * for more information.
 *
 * <p>Before you start the application, please review the comments starting with "TODO(developer)"
 * and update the code to use correct values.
 *
 * <p>To run this sample using Maven:
 *
 * <pre>{@code
 * cd google-analytics-data
 * mvn compile exec:java -Dexec.mainClass="com.google.analytics.data.samples.RunReportWithPaginationSample"
 * }</pre>
 */
public class RunReportWithPaginationSample {

  public static void main(String... args) throws Exception {
    // TODO(developer): Replace with your Google Analytics 4 property ID before running the sample.
    String propertyId = "YOUR-GA4-PROPERTY-ID";
    sampleRunReportWithPagination(propertyId);
  }

  // Runs a report several times, each time retrieving a portion of result using pagination.
  static void sampleRunReportWithPagination(String propertyId) throws Exception {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. After completing all of your requests, call
    // the "close" method on the client to safely clean up any remaining background resources.
    try (BetaAnalyticsDataClient analyticsData = BetaAnalyticsDataClient.create()) {
      RunReportRequest request =
          RunReportRequest.newBuilder()
              .setProperty("properties/" + propertyId)
              .addDateRanges(
                  DateRange.newBuilder().setStartDate("365daysAgo").setEndDate("yesterday"))
              .addDimensions(Dimension.newBuilder().setName("firstUserSource"))
              .addDimensions(Dimension.newBuilder().setName("firstUserMedium"))
              .addDimensions(Dimension.newBuilder().setName("firstUserCampaignName"))
              .addMetrics(Metric.newBuilder().setName("sessions"))
              .addMetrics(Metric.newBuilder().setName("conversions"))
              .addMetrics(Metric.newBuilder().setName("totalRevenue"))
              .setLimit(100000)
              .setOffset(0)
              .build();

      // Make the request.
      RunReportResponse response = analyticsData.runReport(request);
      RunReportSample.printRunResponseResponse(response);

      // Run the same report with a different offset value to retrieve the second page of a
      // response.
      request =
          RunReportRequest.newBuilder()
              .setProperty("properties/" + propertyId)
              .addDateRanges(
                  DateRange.newBuilder().setStartDate("365daysAgo").setEndDate("yesterday"))
              .addDimensions(Dimension.newBuilder().setName("firstUserSource"))
              .addDimensions(Dimension.newBuilder().setName("firstUserMedium"))
              .addDimensions(Dimension.newBuilder().setName("firstUserCampaignName"))
              .addMetrics(Metric.newBuilder().setName("sessions"))
              .addMetrics(Metric.newBuilder().setName("conversions"))
              .addMetrics(Metric.newBuilder().setName("totalRevenue"))
              .setLimit(100000)
              .setOffset(100000)
              .build();

      // Make the request.
      response = analyticsData.runReport(request);
      // Prints the response using a method in RunReportSample.java
      RunReportSample.printRunResponseResponse(response);
    }
  }
}
RunReportWithPaginationSample.java

    request = RunReportRequest(
        property=f"properties/{property_id}",
        date_ranges=[DateRange(start_date="365daysAgo", end_date="yesterday")],
        dimensions=[
            Dimension(name="firstUserSource"),
            Dimension(name="firstUserMedium"),
            Dimension(name="firstUserCampaignName"),
        ],
        metrics=[
            Metric(name="sessions"),
            Metric(name="conversions"),
            Metric(name="totalRevenue"),
        ],
        limit=100000,
        offset=0,
    )
    response = client.run_report(request)
run_report_with_pagination.py

تشير المَعلمة rowCount في الاستجابة إلى العدد الإجمالي للصفوف، مستقلةً عن قيمتَي limit وoffset في الطلب. على سبيل المثال، إذا عرض الرد "rowCount": 272345، ستحتاج إلى ثلاثة طلبات من 100,000 صف لكل صف لاسترداد جميع البيانات.

إليك نموذج طلب للصفوف الـ 100,000 التالية. أمّا جميع المَعلمات الأخرى، مثل dateRange وdimensions وmetrics، فيجب أن تكون مطابقة للطلب الأول.

POST https://analyticsdata.googleapis.com/v1beta/properties/GA4_PROPERTY_ID:runReport
  {
    ...
    "limit": 100000,
    "offset": 100000
  }

      request =
          RunReportRequest.newBuilder()
              .setProperty("properties/" + propertyId)
              .addDateRanges(
                  DateRange.newBuilder().setStartDate("365daysAgo").setEndDate("yesterday"))
              .addDimensions(Dimension.newBuilder().setName("firstUserSource"))
              .addDimensions(Dimension.newBuilder().setName("firstUserMedium"))
              .addDimensions(Dimension.newBuilder().setName("firstUserCampaignName"))
              .addMetrics(Metric.newBuilder().setName("sessions"))
              .addMetrics(Metric.newBuilder().setName("conversions"))
              .addMetrics(Metric.newBuilder().setName("totalRevenue"))
              .setLimit(100000)
              .setOffset(100000)
              .build();

      // Make the request.
      response = analyticsData.runReport(request);
      // Prints the response using a method in RunReportSample.java
      RunReportSample.printRunResponseResponse(response);
RunReportWithPaginationSample.java

    request = RunReportRequest(
        property=f"properties/{property_id}",
        date_ranges=[DateRange(start_date="365daysAgo", end_date="yesterday")],
        dimensions=[
            Dimension(name="firstUserSource"),
            Dimension(name="firstUserMedium"),
            Dimension(name="firstUserCampaignName"),
        ],
        metrics=[
            Metric(name="sessions"),
            Metric(name="conversions"),
            Metric(name="totalRevenue"),
        ],
        limit=100000,
        offset=100000,
    )
    response = client.run_report(request)
run_report_with_pagination.py

يمكنك استخدام قيم offset، على سبيل المثال 200000 أو 300000، لاسترداد النتائج اللاحقة. ويجب أن تكون جميع المَعلمات الأخرى، مثل dateRange وdimensions وmetrics، مماثلة للطلب الأول.

استخدام نطاقات زمنية متعددة

يمكن لطلب تقرير واحد استرداد بيانات عناصر dateRanges متعددة. على سبيل المثال، يقارن هذا التقرير بين أول أسبوعين من آب (أغسطس) 2022 و2023:

POST https://analyticsdata.googleapis.com/v1beta/properties/GA4_PROPERTY_ID:runReport
  {
    "dateRanges": [
      {
        "startDate": "2022-08-01",
        "endDate": "2022-08-14"
      },
      {
        "startDate": "2023-08-01",
        "endDate": "2023-08-14"
      }
    ],
    "dimensions": [{ "name": "platform" }],
    "metrics": [{ "name": "activeUsers" }]
  }

import com.google.analytics.data.v1beta.BetaAnalyticsDataClient;
import com.google.analytics.data.v1beta.DateRange;
import com.google.analytics.data.v1beta.Dimension;
import com.google.analytics.data.v1beta.Metric;
import com.google.analytics.data.v1beta.RunReportRequest;
import com.google.analytics.data.v1beta.RunReportResponse;

/**
 * Google Analytics Data API sample application demonstrating the usage of date ranges in a report.
 *
 * <p>See
 * https://developers.google.com/analytics/devguides/reporting/data/v1/rest/v1beta/properties/runReport#body.request_body.FIELDS.date_ranges
 * for more information.
 *
 * <p>Before you start the application, please review the comments starting with "TODO(developer)"
 * and update the code to use correct values.
 *
 * <p>To run this sample using Maven:
 *
 * <pre>{@code
 * cd google-analytics-data
 * mvn compile exec:java -Dexec.mainClass="com.google.analytics.data.samples.RunReportWithDateRangesSample"
 * }</pre>
 */
public class RunReportWithDateRangesSample {

  public static void main(String... args) throws Exception {
    // TODO(developer): Replace with your Google Analytics 4 property ID before running the sample.
    String propertyId = "YOUR-GA4-PROPERTY-ID";
    sampleRunReportWithDateRanges(propertyId);
  }

  // Runs a report using two date ranges.
  static void sampleRunReportWithDateRanges(String propertyId) throws Exception {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. After completing all of your requests, call
    // the "close" method on the client to safely clean up any remaining background resources.
    try (BetaAnalyticsDataClient analyticsData = BetaAnalyticsDataClient.create()) {
      RunReportRequest request =
          RunReportRequest.newBuilder()
              .setProperty("properties/" + propertyId)
              .addDateRanges(
                  DateRange.newBuilder().setStartDate("2019-08-01").setEndDate("2019-08-14"))
              .addDateRanges(
                  DateRange.newBuilder().setStartDate("2020-08-01").setEndDate("2020-08-14"))
              .addDimensions(Dimension.newBuilder().setName("platform"))
              .addMetrics(Metric.newBuilder().setName("activeUsers"))
              .build();

      // Make the request.
      RunReportResponse response = analyticsData.runReport(request);
      // Prints the response using a method in RunReportSample.java
      RunReportSample.printRunResponseResponse(response);
    }
  }
}
RunReportWithDateRangesSample.java

from google.analytics.data_v1beta import BetaAnalyticsDataClient
from google.analytics.data_v1beta.types import (
    DateRange,
    Dimension,
    Metric,
    RunReportRequest,
)

from run_report import print_run_report_response


def run_sample():
    """Runs the sample."""
    # TODO(developer): Replace this variable with your Google Analytics 4
    #  property ID before running the sample.
    property_id = "YOUR-GA4-PROPERTY-ID"
    run_report_with_date_ranges(property_id)


def run_report_with_date_ranges(property_id="YOUR-GA4-PROPERTY-ID"):
    """Runs a report using two date ranges."""
    client = BetaAnalyticsDataClient()

    request = RunReportRequest(
        property=f"properties/{property_id}",
        date_ranges=[
            DateRange(start_date="2019-08-01", end_date="2019-08-14"),
            DateRange(start_date="2020-08-01", end_date="2020-08-14"),
        ],
        dimensions=[Dimension(name="platform")],
        metrics=[Metric(name="activeUsers")],
    )
    response = client.run_report(request)
    print_run_report_response(response)

run_report_with_date_ranges.py

عند تضمين عدة dateRanges في طلب، تتم إضافة عمود dateRange تلقائيًا إلى الاستجابة. عندما يكون عمود "dateRange" بالقيمة date_range_0، تكون بيانات ذلك الصف مرتبطة بالنطاق الزمني الأول. عندما تكون قيمة العمود "dateRange" هي date_range_1، تكون بيانات هذا الصف مرتبطة بالنطاق الزمني الثاني.

إليك نموذج ردّ لنطاقَين زمنيَين:

{
  "dimensionHeaders": [
    {
      "name": "platform"
    },
    {
      "name": "dateRange"
    }
  ],
  "metricHeaders": [
    {
      "name": "activeUsers",
      "type": "TYPE_INTEGER"
    }
  ],
  "rows": [
    {
      "dimensionValues": [
        {
          "value": "iOS"
        },
        {
          "value": "date_range_0"
        }
      ],
      "metricValues": [
        {
          "value": "774"
        }
      ]
    },
    {
      "dimensionValues": [
        {
          "value": "Android"
        },
        {
          "value": "date_range_1"
        }
      ],
      "metricValues": [
        {
          "value": "335"
        }
      ]
    },
    ...
  ],
}

الخطوات التالية

يمكنك الاطّلاع على الميزات المتقدّمة وإعداد التقارير في الوقت الفعلي للحصول على نظرة عامة حول ميزات إعداد التقارير الأكثر تقدّمًا للإصدار الأول من Data API.