Get the vehicle ready

This section shows how to get the vehicle ready for trips. You must complete each of the following steps before your backend can match a vehicle to a trip.

Set up listeners

After initializing the Driver SDK and creating a GMTDRidesharingDriverAPI instance, you can set up event listeners to monitor the success or failure of vehicle updates sent to Fleet Engine and your backend. These listeners can trigger actions within your driver app, such as notifying the driver if communication with your backend fails.

Listen for vehicle update events

When the driver enables location updates in the driver app, the Driver SDK sends regular vehicle updates to Fleet Engine and the customer backend through the GMTDVehicleReporter class. You can have the app respond to update events by setting up the GMTDVehicleReporterListener protocol.

With GMTDVehicleReporterListener, you can handle the following events:

The following examples show how to set up GMTDVehicleReporterListener to handle these events:

Swift

import GoogleRidesharingDriver

private let providerID = "INSERT_YOUR_PROVIDER_ID"

class SampleViewController: UIViewController, GMTDVehicleReporterListener {
  private let mapView: GMSMapView

  override func viewDidLoad() {
    // Assumes you have implemented the sample code up to this step.
    ridesharingDriverAPI.vehicleReporter.add(self)
  }

  func vehicleReporter(_ vehicleReporter: GMTDVehicleReporter, didSucceed vehicleUpdate: GMTDVehicleUpdate) {
    // Handle update succeeded.
  }

  func vehicleReporter(_ vehicleReporter: GMTDVehicleReporter, didFail vehicleUpdate: GMTDVehicleUpdate, withError error: Error) {
    // Handle update failed.
  }
}

Objective-C

/**
 *   SampleViewController.h
 */
@interface SampleViewController : UIViewController<GMTDVehicleReporterListener>
@end

/**
 *   SampleViewController.m
 */
#import "SampleViewController.h"
#import "SampleAccessTokenProvider.h"
#import <GoogleRidesharingDriver/GoogleRidesharingDriver.h>

static NSString *const PROVIDER_ID = @"INSERT_YOUR_PROVIDER_ID";

@implementation SampleViewController {
  GMSMapView *_mapView;
}

- (void)viewDidLoad {
  // Assumes you have implemented the sample code up to this step.
  [ridesharingDriverAPI.vehicleReporter addListener:self];
}

- (void)vehicleReporter:(GMTDVehicleReporter *)vehicleReporter didSucceedVehicleUpdate:(GMTDVehicleUpdate *)vehicleUpdate {
  // Handle update succeeded.
}

- (void)vehicleReporter:(GMTDVehicleReporter *)vehicleReporter didFailVehicleUpdate:(GMTDVehicleUpdate *)vehicleUpdate withError:(NSError *)error {
  // Handle update failed.
}

@end

Listen for vehicle location updates

The Navigation SDK provides location updates to the Driver SDK through the GMSRoadSnappedLocationProvider class. To receive those updates, you must set up the GMTDVehicleReporter as a listener.

Swift

import GoogleRidesharingDriver

private let providerID = "INSERT_YOUR_PROVIDER_ID"

class SampleViewController: UIViewController, GMTDVehicleReporterListener {
  private let mapView: GMSMapView

  override func viewDidLoad() {
    // Assumes you have implemented the sample code up to this step.
    if let roadSnappedLocationProvider = mapView.roadSnappedLocationProvider {
      roadSnappedLocationProvider.add(ridesharingDriverAPI.vehicleReporter)
      roadSnappedLocationProvider.startUpdatingLocation()
    }
  }
}

Objective-C

/**
 *   SampleViewController.h
 */
@interface SampleViewController : UIViewController<GMTDVehicleReporterListener>
@end

/**
 *   SampleViewController.m
 */
#import "SampleViewController.h"
#import "SampleAccessTokenProvider.h"
#import <GoogleRidesharingDriver/GoogleRidesharingDriver.h>

static NSString *const PROVIDER_ID = @"INSERT_YOUR_PROVIDER_ID";

@implementation SampleViewController {
  GMSMapView *_mapView;
}

- (void)viewDidLoad {
  // Assumes you have implemented the sample code up to this step.
  [_mapView.roadSnappedLocationProvider addListener:ridesharingDriverAPI.vehicleReporter];
  [_mapView.roadSnappedLocationProvider startUpdatingLocation];
}

@end

Enable location updates

To enable location updates, set locationTrackingEnabled to true on GMTDVehicleReporter in the driver app. Then the GMTDVehicleReporter class automatically sends location updates to Fleet Engine. After the Fleet Engine and customer backend services match and assign the vehicle to a trip, the GMTDVehicleReporter class sends route updates automatically when the GMSNavigator is in navigation mode, which is when a destination is set through setDestinations.

The Driver SDK sets the route to match the driver's current navigation path. To ensure accurate location updates, set the waypoint in setDestinations to match the destination in Fleet Engine.

The following example shows how to enable location updates:

Swift

import GoogleRidesharingDriver

private let providerID = "INSERT_YOUR_PROVIDER_ID"

class SampleViewController: UIViewController, GMTDVehicleReporterListener {
  private let mapView: GMSMapView

  override func viewDidLoad() {
    // Assumes you have implemented the sample code up to this step.
    ridesharingDriverAPI.vehicleReporter.locationTrackingEnabled = true
  }
}

Objective-C

/**
 *   SampleViewController.m
 */
#import "SampleViewController.h"
#import "SampleAccessTokenProvider.h"
#import <GoogleRidesharingDriver/GoogleRidesharingDriver.h>

static NSString *const PROVIDER_ID = @"INSERT_YOUR_PROVIDER_ID";

@implementation SampleViewController {
  GMSMapView *_mapView;
}

- (void)viewDidLoad {
  // Assumes you have implemented the sample code up to this step.
  ridesharingDriverAPI.vehicleReporter.locationTrackingEnabled = YES;
}

@end

Set the update interval

By default, when you set locationTrackingEnabled to true, the Driver SDK sends trip and vehicle updates to Fleet Engine at a 10-second interval. You can change the update interval with locationUpdateInterval to a minimum update interval of 5 seconds or a maximum of 60 seconds. More frequent updates may result in slower requests and errors.

Set the vehicle state to online

After you enable location updates, set the vehicle state to ONLINE to make the vehicle available for search queries in Fleet Engine.

The following examples show how to set the vehicle state to ONLINE. For details, see updateVehicleState.

Swift

import GoogleRidesharingDriver

private let providerID = "INSERT_YOUR_PROVIDER_ID"

class SampleViewController: UIViewController, GMTDVehicleReporterListener {
  private let mapView: GMSMapView

  override func viewDidLoad() {
    // Assumes you have implemented the sample code up to this step.
    ridesharingDriverAPI.vehicleReporter.update(.online)
  }
}

Objective-C

#import "SampleViewController.h"
#import "SampleAccessTokenProvider.h"
#import <GoogleRidesharingDriver/GoogleRidesharingDriver.h>

static NSString *const PROVIDER_ID = @"INSERT_YOUR_PROVIDER_ID";

@implementation SampleViewController {
  GMSMapView *_mapView;
}

- (void)viewDidLoad {
  // Assumes you have implemented the sample code up to this step.
  [ridesharingDriverAPI.vehicleReporter
                                   updateVehicleState:GMTDVehicleStateOnline];
}

@end

What's next

Set the trip details