स्टॉप की स्थिति अपडेट करें

gRPC

 static final String PROJECT_ID = "my-delivery-co-gcp-project";
 static final String VEHICLE_ID = "vehicle-8241890";

 DeliveryServiceBlockingStub deliveryService =
   DeliveryServiceGrpc.newBlockingStub(channel);

 // Vehicle settings
 DeliveryVehicle deliveryVehicle = DeliveryVehicle.newBuilder()
     // Next stop marked as ENROUTE
     .addRemainingVehicleJourneySegments(VehicleJourneySegment.newBuilder()  // 1st stop
        .setStop(VehicleStop.newBuilder()
            .setPlannedLocation(LocationInfo.newBuilder()
                .setPoint(LatLng.newBuilder()
                    .setLatitude(37.7749)
                    .setLongitude(122.4194)))
            .addTasks(TaskInfo.newBuilder().setTaskId(TASK1_ID))
            .setState(VehicleStop.State.ENROUTE)))
     // All other stops marked as NEW
     .addRemainingVehicleJourneySegments(VehicleJourneySegment.newBuilder()  // 2nd stop
        .setStop(VehicleStop.newBuilder()
            .setPlannedLocation(LocationInfo.newBuilder()
                .setPoint(LatLng.newBuilder()
                    .setLatitude(37.3382)
                    .setLongitude(121.8863)))
            .addTasks(TaskInfo.newBuilder().setTaskId(TASK2_ID))
            .setState(VehicleStop.State.NEW)))
     .build();

 // DeliveryVehicle request
 UpdateDeliveryVehicleRequest updateDeliveryVehicleRequest =
   UpdateDeliveryVehicleRequest.newBuilder()  // No need for the header
       .setName(vehicleName)
       .setDeliveryVehicle(deliveryVehicle)
       .setUpdateMask(FieldMask.newBuilder().addPaths("remaining_vehicle_journey_segments"))
       .build();

 try {
   DeliveryVehicle updatedDeliveryVehicle =
       deliveryService.updateDeliveryVehicle(updateDeliveryVehicleRequest);
 } catch (StatusRuntimeException e) {
   Status s = e.getStatus();
   switch (s.getCode()) {
      case NOT_FOUND:
        break;
      case PERMISSION_DENIED:
        break;
   }
   return;
 }

REST

PATCH https://fleetengine.googleapis.com/v1/providers/<project_id>/deliveryVehicles/<id>?updateMask=remainingVehicleJourneySegments`

• <id>, टास्क का यूनीक आइडेंटिफ़ायर है.
• अनुरोध हेडर में अनुमति फ़ील्ड होना चाहिए, जिसकी वैल्यू Bearer <token> हो. <token> को आपका सर्वर, सेवा खाते की भूमिकाओं और JSON वेब टोकन में बताए गए दिशा-निर्देशों के मुताबिक जारी करता है.
• अनुरोध के मुख्य हिस्से में DeliveryVehicle इकाई शामिल होनी चाहिए:

curl निर्देश का उदाहरण:

 # Set JWT, PROJECT_ID, VEHICLE_ID, TASK1_ID, and TASK2_ID in the local
 # environment
 curl -X PATCH "https://fleetengine.googleapis.com/v1/providers/${PROJECT_ID}/deliveryVehicles/${VEHICLE_ID}?updateMask=remainingVehicleJourneySegments" \
   -H "Content-type: application/json" \
   -H "Authorization: Bearer ${JWT}" \
   --data-binary @- << EOM
 {
   "remainingVehicleJourneySegments": [
     {
       "stop": {
         "state": "ENROUTE",
         "plannedLocation": {
           "point": {
             "latitude": 37.7749,
             "longitude": -122.084061
           }
         },
         "tasks": [
           {
             "taskId": "${TASK1_ID}"
           }
         ]
       }
     },
     {
       "stop": {
         "state": "NEW",
         "plannedLocation": {
           "point": {
             "latitude": 37.3382,
             "longitude": 121.8863
           }
         },
         "tasks": [
           {
             "taskId": "${TASK2_ID}"
           }
         ]
       }
     }
   ]
 }
 EOM

gRPC

  static final String PROJECT_ID = "my-delivery-co-gcp-project";
  static final String VEHICLE_ID = "vehicle-8241890";

  DeliveryServiceBlockingStub deliveryService =
    DeliveryServiceGrpc.newBlockingStub(channel);

  // Vehicle settings
  String vehicleName = "providers/" + PROJECT_ID + "/deliveryVehicles/" + VEHICLE_ID;
  DeliveryVehicle deliveryVehicle = DeliveryVehicle.newBuilder()
      // Marking the arrival at stop.
      .addRemainingVehicleJourneySegments(VehicleJourneySegment.newBuilder()
         .setStop(VehicleStop.newBuilder()
             .setPlannedLocation(LocationInfo.newBuilder()
                 .setPoint(LatLng.newBuilder()
                     .setLatitude(37.7749)
                     .setLongitude(122.4194)))
             .addTasks(TaskInfo.newBuilder().setTaskId(TASK1_ID))
             .setState(VehicleStop.State.ARRIVED)))
      // All other remaining stops marked as NEW.
      .addRemainingVehicleJourneySegments(VehicleJourneySegment.newBuilder()  // 2nd stop
         .setStop(VehicleStop.newBuilder()
             .setPlannedLocation(LocationInfo.newBuilder()
                 .setPoint(LatLng.newBuilder()
                     .setLatitude(37.3382)
                     .setLongitude(121.8863)))
             .addTasks(TaskInfo.newBuilder().setTaskId(TASK2_ID))
             .setState(VehicleStop.State.NEW))) // Remaining stops must be NEW.
      .build();

  // DeliveryVehicle request
  UpdateDeliveryVehicleRequest updateDeliveryVehicleRequest =
    UpdateDeliveryVehicleRequest.newBuilder()  // No need for the header
        .setName(vehicleName)
        .setDeliveryVehicle(deliveryVehicle)
        .setUpdateMask(FieldMask.newBuilder()
            .addPaths("remaining_vehicle_journey_segments"))
        .build();

  try {
    DeliveryVehicle updatedDeliveryVehicle =
        deliveryService.updateDeliveryVehicle(updateDeliveryVehicleRequest);
  } catch (StatusRuntimeException e) {
    Status s = e.getStatus();
    switch (s.getCode()) {
       case NOT_FOUND:
         break;
       case PERMISSION_DENIED:
         break;
    }
    return;
  }

REST

`PATCH https://fleetengine.googleapis.com/v1/providers/<project_id>/deliveryVehicles/<id>?updateMask=remainingVehicleJourneySegments`

• <id>, टास्क का यूनीक आइडेंटिफ़ायर है.
• अनुरोध हेडर में अनुमति फ़ील्ड होना चाहिए, जिसकी वैल्यू Bearer <token> हो. <token> को आपका सर्वर, सेवा खाते की भूमिकाओं और JSON वेब टोकन में बताए गए दिशा-निर्देशों के मुताबिक जारी करता है.
• अनुरोध के मुख्य हिस्से में DeliveryVehicle इकाई शामिल होनी चाहिए:

curl निर्देश का उदाहरण:

  # Set JWT, PROJECT_ID, VEHICLE_ID, TASK1_ID, and TASK2_ID in the local
  # environment
  curl -X PATCH "https://fleetengine.googleapis.com/v1/providers/${PROJECT_ID}/deliveryVehicles/${VEHICLE_ID}?updateMask=remainingVehicleJourneySegments" \
    -H "Content-type: application/json" \
    -H "Authorization: Bearer ${JWT}" \
    --data-binary @- << EOM
  {
    "remainingVehicleJourneySegments": [
      {
        "stop": {
          "state": "ARRIVED",
          "plannedLocation": {
            "point": {
              "latitude": 37.7749,
              "longitude": -122.084061
            }
          },
          "tasks": [
            {
              "taskId": "${TASK1_ID}"
            }
          ]
        }
      },
      {
        "stop": {
          "state": "NEW",
          "plannedLocation": {
            "point": {
              "latitude": 37.3382,
              "longitude": 121.8863
            }
          },
          "tasks": [
            {
              "taskId": "${TASK2_ID}"
            }
          ]
        }
      }
    ]
  }
  EOM

gRPC

  static final String PROJECT_ID = "my-delivery-co-gcp-project";
  static final String VEHICLE_ID = "vehicle-8241890";

  DeliveryServiceBlockingStub deliveryService =
    DeliveryServiceGrpc.newBlockingStub(channel);

  // Vehicle settings
  String vehicleName = "providers/" + PROJECT_ID + "/deliveryVehicles/" + VEHICLE_ID;
  DeliveryVehicle deliveryVehicle = DeliveryVehicle.newBuilder()
      // This stop has been completed and is commented out to indicate it
      // should be removed from the list of vehicle journey segments.
      // .addRemainingVehicleJourneySegments(VehicleJourneySegment.newBuilder()
      //    .setStop(VehicleStop.newBuilder()
      //        .setPlannedLocation(LocationInfo.newBuilder()
      //            .setPoint(LatLng.newBuilder()
      //                .setLatitude(37.7749)
      //                .setLongitude(122.4194)))
      //        .addTasks(TaskInfo.newBuilder().setTaskId(TASK1_ID))
      //        .setState(VehicleStop.State.ARRIVED)))
      // All other remaining stops marked as NEW.
      // The next stop could be marked as ENROUTE if the vehicle has begun
      // its journey to the next stop.
      .addRemainingVehicleJourneySegments(VehicleJourneySegment.newBuilder()  // Next stop
         .setStop(VehicleStop.newBuilder()
             .setPlannedLocation(LocationInfo.newBuilder()
                 .setPoint(LatLng.newBuilder()
                     .setLatitude(37.3382)
                     .setLongitude(121.8863)))
             .addTasks(TaskInfo.newBuilder().setTaskId(TASK2_ID))
             .setState(VehicleStop.State.NEW)))
      .build();

  // DeliveryVehicle request
  UpdateDeliveryVehicleRequest updateDeliveryVehicleRequest =
    UpdateDeliveryVehicleRequest.newBuilder()  // no need for the header
        .setName(vehicleName)
        .setDeliveryVehicle(deliveryVehicle)
        .setUpdateMask(FieldMask.newBuilder()
            .addPaths("remaining_vehicle_journey_segments"))
        .build();

  try {
    DeliveryVehicle updatedDeliveryVehicle =
        deliveryService.updateDeliveryVehicle(updateDeliveryVehicleRequest);
  } catch (StatusRuntimeException e) {
    Status s = e.getStatus();
    switch (s.getCode()) {
       case NOT_FOUND:
         break;
       case PERMISSION_DENIED:
         break;
    }
    return;
  }

REST

PATCH https://fleetengine.googleapis.com/v1/providers/<project_id>/deliveryVehicles/<id>?updateMask=remaining_vehicle_journey_segments`

• <id>, टास्क का यूनीक आइडेंटिफ़ायर है.
• अनुरोध हेडर में अनुमति फ़ील्ड होना चाहिए, जिसकी वैल्यू Bearer <token> हो. <token> को आपका सर्वर, सेवा खाते की भूमिकाओं और JSON वेब टोकन में बताए गए दिशा-निर्देशों के मुताबिक जारी करता है.
• अनुरोध के मुख्य हिस्से में DeliveryVehicle इकाई शामिल होनी चाहिए:

curl निर्देश का उदाहरण:

 # Set JWT, PROJECT_ID, VEHICLE_ID, TASK1_ID, and TASK2_ID in the local
 # environment
 curl -X PATCH "https://fleetengine.googleapis.com/v1/providers/${PROJECT_ID}/deliveryVehicles/${VEHICLE_ID}?updateMask=remainingVehicleJourneySegments" \
   -H "Content-type: application/json" \
   -H "Authorization: Bearer ${JWT}" \
   --data-binary @- << EOM
 {
   "remainingVehicleJourneySegments": [
     {
       "stop": {
         "state": "NEW",
         "plannedLocation": {
           "point": {
             "latitude": 37.3382,
             "longitude": 121.8863
           }
         },
         "tasks": [
           {
             "taskId": "${TASK2_ID}"
           }
         ]
       }
     }
   ]
 }
 EOM