با مجموعهها، منظم بمانید
ذخیره و دستهبندی محتوا براساس اولویتهای شما.
زمانی که Google یک درخواست پیشنهاد برای برنامه شما ارسال میکند، تعامل زمان واقعی مناقصه آغاز میشود. این راهنما نحوه کدگذاری درخواست خود را برای پردازش درخواست پیشنهاد توضیح می دهد.
تجزیه درخواست
Google یک درخواست پیشنهاد را به عنوان یک بافر پروتکل سریالی که به عنوان بار دودویی یک درخواست HTTP POST پیوست شده است، ارسال می کند. Content-Type روی application/octet-stream تنظیم شده است. برای نمونه به نمونه درخواست پیشنهاد قیمت مراجعه کنید.
شما باید این درخواست را در یک نمونه از پیام BidRequest تجزیه کنید. BidRequest در realtime-bidding.proto تعریف شده است که از صفحه داده مرجع قابل دریافت است. می توانید پیام را با استفاده از متد ParseFromString() در کلاس تولید شده برای BidRequest تجزیه کنید. به عنوان مثال، کد C++ زیر درخواستی را که یک بار POST در یک رشته داده شده است تجزیه می کند:
string post_payload = /* the payload from the POST request */;
BidRequest bid_request;
if (bid_request.ParseFromString(post_payload)) {
// Process the request.
}
هنگامی که BidRequest را دارید، می توانید با آن به عنوان یک شی کار کنید و فیلدهای مورد نیاز خود را استخراج و تفسیر کنید. به عنوان مثال، در C++:
for (int i = 0; i < bid_request.adslot_size(); ++i) {
const BidRequest_AdSlot& adslot = bid_request.adslot(i);
// Decide what to bid on adslot.
}
برخی از اطلاعات ارسال شده در BidRequest ، مانند شناسه کاربر Google، زبان یا موقعیت جغرافیایی، همیشه در دسترس نیستند. اگر گروههای تبلیغاتی پیشهدفگیری دارید که از اطلاعاتی استفاده میکنند که برای یک نمایش مشخص ناشناخته هستند، آن گروههای تبلیغاتی مطابقت ندارند. در مواردی که اطلاعات مفقود برای شرایط پیشهدفسازی اهمیتی ندارد، درخواستهای پیشنهادی با حذف اطلاعات ارسال میشوند.
اطلاعات مربوط به گروه تبلیغاتی پیش هدفمند در گروه MatchingAdData برای هر AdSlot موجود است. این شامل اولین شناسه گروه آگهی منطبق از گروه تبلیغاتی پیشهدفسازی است که از Google خواسته بود درخواست پیشنهاد را ارسال کند، یعنی گروه آگهی و کمپینی که در صورت برنده شدن پاسخ شما در حراج برای نمایش، هزینه دریافت میشود. تحت شرایط خاص، باید به صراحت billing_id برای انتساب در BidResponse.AdSlot مشخص کنید، برای مثال، زمانی که BidRequest.AdSlot بیش از یک matching_ad_data دارد. برای کسب اطلاعات بیشتر در مورد محدودیتهای محتوای پیشنهاد، به realtime-bidding.proto مراجعه کنید.
فایل های دیکشنری
درخواست مناقصه از شناسه های تعریف شده در فایل های فرهنگ لغت استفاده می کند که در صفحه داده های مرجع موجود است.
پیشنهاد ماکروهای URL
به صورت اختیاری، برخی از فیلدهای BidRequest را می توان در URL مورد استفاده در درخواست HTTP POST درج کرد. این مفید است، برای مثال، اگر از یک فرانت اند سبک استفاده می کنید که با استفاده از مقداری از درخواست، روی چندین پشتیبان تعادل بارگذاری می کند. برای درخواست پشتیبانی از ماکروهای جدید، با مدیر حساب فنی خود تماس بگیرید.
ماکرو
شرح
%%GOOGLE_USER_ID%%
با google_user_id از BidRequest جایگزین شد. به عنوان مثال، URL پیشنهاد دهنده
درخواستهای پیشنهادی ارسال شده به مناقصهگران مبادلهای و شبکهای که در مناقصه آزاد شرکت میکنند مشابه درخواستهای خریداران مجاز شرکتکننده در مناقصه استاندارد بلادرنگ است. مشتریان مناقصه باز تعداد کمی فیلد اضافی دریافت خواهند کرد و تعدادی از فیلدهای موجود ممکن است کاربردهای جایگزین داشته باشند. این موارد شامل موارد زیر است:
OpenRTB
خریداران مجاز
جزئیات
BidRequest.imp[].ext.dfp_ad_unit_code
BidRequest.adslot[].dfp_ad_unit_code
حاوی کد شبکه Ad Manager ناشر و به دنبال آن سلسله مراتب واحد تبلیغات است که با اسلش های رو به جلو از هم جدا شده اند.
به عنوان مثال، این با قالب بندی شبیه به: /1234/cruises/mars ظاهر می شود.
BidRequest.user.data[].segment[]
BidRequest.adslot[].exchange_bidding.key_value[]
جفت های مکرر کلید-مقدار از ناشر به پیشنهاد دهنده مبادله ارسال می شود.
وقتی BidRequest.user.data[].name روی “Publisher Passed” تنظیم شده باشد، میتوانید تعیین کنید که مقادیر جفتهای کلید-مقدار ارسال شده توسط ناشر هستند.
فروشندگان مجاز را اعلام کنید
فروشندگان فناوری که خدماتی مانند تحقیق، بازاریابی مجدد و ارائه تبلیغات را ارائه می دهند ممکن است در تعامل بین خریداران و فروشندگان نقش داشته باشند. فقط فروشندگانی مجاز هستند که Google آنها را برای مشارکت در تعاملات خریداران مجاز بررسی کرده است.
برای درک BidRequest و ایجاد BidResponse ، باید از دو امکان متفاوت برای اعلام فروشندگان فناوری آگاه باشید:
سایر فروشندگان تنها در صورتی می توانند شرکت کنند که در BidRequest و BidResponse اعلام شده باشند:
در BidRequest ، فیلد allowed_vendor_type مشخص میکند که فروشنده به کدام فروشنده اجازه میدهد. فروشندگانی که در قسمت allowed_vendor_typeBidRequest ارسال می شوند در فایل فرهنگ لغت Vendors.txt فهرست شده اند.
در BidResponse ، فیلد vendor_type مشخص میکند که خریدار قصد استفاده از کدام یک از فروشندگان مجاز را دارد.
نمونه درخواست مناقصه
نمونههای زیر نمونههای قابل خواندن توسط انسان از درخواستهای Protobuf و JSON را نشان میدهند.
برای تبدیل درخواست مناقصه به فرم باینری، همانطور که از بار POST در یک درخواست واقعی دریافت می کنید، می توانید موارد زیر را انجام دهید (در C++). البته توجه داشته باشید که این مورد برای OpenRTB JSON قابل اجرا نیست.
string text_format_example = /* example from above */;
BidRequest bid_request;
if (TextFormat::ParseFromString(text_format_example, &bid_request)) {
string post_payload;
if (bid_request.SerializeToString(&post_payload)) {
// post_payload is a binary serialization of the protocol buffer
}
}
بازاریابی مجدد
خریداران مجاز شناسه تبلیغات تلفن همراه را در درخواست های پیشنهادی از یک برنامه تلفن همراه ارسال می کنند. شناسه تبلیغات تلفن همراه میتواند IDFA iOS یا شناسه تبلیغاتی Android باشد که از طریق %%EXTRA_TAG_DATA%% ماکرو در برچسب جاوا اسکریپت مدیریت شده توسط خریداران مجاز ارسال میشود.
ماکرو %%ADVERTISING_IDENTIFIER%% به خریداران امکان میدهد iOS IDFA یا شناسه تبلیغات Android را در نمایش نمایش دریافت کنند. بافر پروتو رمزگذاری شده MobileAdvertisingId مانند %%EXTRA_TAG_DATA%% را برمی گرداند:
میتوانید با استفاده از شناسههای تبلیغاتی که در طول نمایش نمایش جمعآوری کردهاید، فهرستهای کاربری را از شناسههای تبلیغات تلفن همراه ایجاد کنید. این لیست کاربران را می توان در سرور شما یا سرور ما نگهداری کرد. برای ایجاد لیست کاربران در سرورهای Google می توانید از امکانات آپلود انبوه ما استفاده کنید.
وقتی شناسه تبلیغات تلفن همراه با فهرست کاربران مطابقت دارد، میتوانید از آن برای اجرای بازاریابی مجدد استفاده کنید.
بازخورد در زمان واقعی
بازخورد بلادرنگ برای خریداران مجاز و همچنین مبادلات و شبکهها با استفاده از مناقصه باز در دسترس است.
بازخورد پاسخ پیشنهادی در درخواست پیشنهادی بعدی برای پروتکل AdX و OpenRTB پشتیبانی میشود. برای OpenRTB، در BidRequestExt ارسال می شود.
علاوه بر فیلدهای پیشفرض ارسال شده در بازخورد پاسخ پیشنهادی، میتوانید با استفاده از یک event_notification_token که در BidResponse بازگردانده میشود، دادههای سفارشی را در پاسخ پیشنهاد (در AdX Proto یا OpenRTB) ارسال کنید. event_notification_token دادههای دلخواه است که فقط برای پیشنهاددهنده شناخته میشود و ممکن است به اشکالزدایی کمک کند، برای مثال: شناسه هدفگیری جدید یا شناسه پیشنهادی که نشاندهنده یک تاکتیک جدید است، یا ابرداده مرتبط با خلاقیتی که فقط برای پیشنهاد دهنده شناخته میشود. برای جزئیات، به بافر پروتکل افزونههای OpenRTB برای RTB و AdX Proto برای AdX مراجعه کنید.
هنگامی که خریداران مجاز درخواست پیشنهادی را برای مناقصهدهنده ارسال میکنند، مناقصهدهنده با یک BidResponse پاسخ میدهد. اگر پیشنهاد دهنده بازخورد بلادرنگ را فعال کرده باشد، در یک درخواست پیشنهادی بعدی، خریداران مجاز بازخوردی را در مورد پاسخ در یک پیام BidResponseFeedback ارسال می کنند، همانطور که در زیر نشان داده شده است:
// Feedback on bids submitted in previous responses. This is only set if
// real-time feedback is enabled for your bidder. Contact your account
// manager if you want to enable real-time feedback.
message BidResponseFeedback {
// The unique id from BidRequest.id
optional bytes request_id = 1;
// The index of the BidResponse_Ad if there was more than one. The index
// starts at zero for the first creative.
optional int32 creative_index = 2;
// The status code for the ad. See creative-status-codes.txt in the
// technical documentation for a list of ids.
optional int32 creative_status_code = 3;
// If the bid won the auction, this is the price paid in your account
// currency. If the bid participated in the auction but was out-bid, this
// is the CPM that should have been exceeded in order to win. This is not
// set if the bid was filtered prior to the auction, if the publisher or
// winning bidder has opted out of price feedback or if your account has
// opted out of sharing winning prices with other bidders. For first-price
// auctions, minimum_bid_to_win is populated instead of this field.
optional int64 cpm_micros = 4;
// The minimum bid value necessary to have won the auction, in micros of
// your account currency. If your bid won the auction, this is the second
// highest bid that was not filtered (including the floor price). If your
// bid did not win the auction, this is the winning candidate's bid. This
// field will only be populated if your bid participated in a first-price
// auction, and will not be populated if your bid was filtered prior to the
// auction.
optional int64 minimum_bid_to_win = 7;
// The minimum bid value necessary to have won the server-side component of
// the overall auction given that there was also an interest group bidding
// component to the overall auction which ran using the Protected Audience
// API. The value is expressed in CPM micros of the buyer account currency.
// The minimum bid to win for the overall auction, including bids from the
// server-side and the on-device interest group components, is populated in
// the minimum_bid_to_win field of the same BidResponseFeedback object.
optional int64 server_side_component_minimum_bid_to_win = 16;
// Billable event rate multiplier that was applied to this bid during
// ranking. The adjustment reflects the likelihood that your bid would
// generate a billable event (namely, the ad renders successfully) if it won
// the auction, relative to the probability that other bids generate a
// billable event if they won the auction. This adjustment can be larger or
// smaller than 1. This affects the final ranking in the auction only; in
// particular, this multiplier does not affect the payment or whether the
// bid clears any floor price.
optional float billable_event_rate_bid_adjustment = 15 [default = 1];
// When a publisher uses an RTB auction and waterfall-based SDK mediation on
// the same query, the winner of the real-time auction must also compete in
// a mediation waterfall (which is ordered by price) to win the impression.
// If the bid participated in the auction and there was no waterfall, the
// value of this field is 0. If the bid participated in the auction and
// there was a waterfall, the value of this field is a price representing a
// sample bid from the eligible mediation networks that were higher than the
// auction winner, weighted by expected fill rate. This field can be used
// in conjunction with minimum_bid_to_win to train bidding models. The CPM
// is in micros of your account currency.
optional int64 sampled_mediation_cpm_ahead_of_auction_winner = 10;
// Event notification token that was included in the bid response.
optional bytes event_notification_token = 5;
// Buyer creative ID that was included in the bid response.
optional string buyer_creative_id = 6;
// Possible types of bid response feedback objects.
enum FeedbackType {
FEEDBACK_TYPE_UNSPECIFIED = 0;
// Feedback for a bid that was submitted on a bid response.
BID_FEEDBACK = 1;
// Feedback for an interest group buyer submitted on a bid response to
// particpate in an interest group bidding component of the auction run
// using the Protected Audience API.
INTEREST_GROUP_BUYER_FEEDBACK = 2;
}
// The type of the BidResponseFeedback message. Google will send separate
// BidResponseFeedback objects for:
// a) Each bid submitted on a bid response
// b) Each buyer submitted on a bid response to particpate in an interest
// group bidding component of the auction run using the Protected Audience
// API.
optional FeedbackType feedback_type = 17;
// Origin of an interest group buyer that was included in the bid response.
// This field is populated only for feedback where a bidder opted in an
// interest group buyer to participate in the interest group bidding
// component of the overall auction run using the Protected Audience API.
// To learn more about origins, see https://www.rfc-editor.org/rfc/rfc6454.
// To learn more about interest group bidding and the Protected Audience
// API, see
// https://developers.google.com/authorized-buyers/rtb/fledge-origin-trial.
optional string buyer_origin = 18;
// The status code for the submitted interest group buyer. This field is
// only populated in the feedback for an interest group buyer that a bidder
// requested to enter into the interest group auction through the bid
// response. Individual creative status codes of bids submitted by the buyer
// in the on-device interest group auction are not available. See
// https://storage.googleapis.com/adx-rtb-dictionaries/interest-group-buyer-status-codes.txt
// for a list of interest group buyer status codes.
optional int32 interest_group_buyer_status_code = 19;
}
repeated BidResponseFeedback bid_response_feedback = 44;
// How many milliseconds Google will wait for a response before ignoring it.
optional int32 response_deadline_ms = 57;
// -----------------------------------------------------------
// Testing options.
//
// If true, then this is a test request. Results will not be displayed to
// users and you will not be billed for a response even if it wins the
// auction. You should still do regular processing since the request may be
// used to evaluate latencies or for other testing. During your initial
// testing with Google traffic any response that you make will be filtered
// out of the auction whether this option has a value of true or false.
optional bool is_test = 15 [default = false];
// If true, then this request is intended to measure network latency.
// Return an empty BidResponse with only processing_time_ms set as quickly as
// possible without executing any bidding logic.
optional bool is_ping = 17 [default = false];
// If true, then the callout model predicted that you will not bid
// on this request. We send a sampled percentage of such requests so that we
// can automatically update the model when bidding patterns change.
optional bool is_predicted_to_be_ignored = 45 [default = false];
// SupplyChain object. For more information, see
// https://github.com/InteractiveAdvertisingBureau/openrtb/blob/master/supplychainobject.md.
message SupplyChain {
// Indicates whether the chain contains all nodes involved in the
// transaction leading back to the owner of the site, app or other medium of
// the inventory.
optional bool complete = 1;
message SupplyChainNode {
// The canonical domain name of the SSP, Exchange, Header Wrapper, etc
// system that bidders connect to. This may be the operational domain of
// the system, if that is different than the parent corporate domain, to
// facilitate WHOIS and reverse IP lookups to establish clear ownership of
// the delegate system. This should be the same value as used to identify
// sellers in an ads.txt file if one exists.
optional string advertising_system_identifier = 1;
// The identifier associated with the seller or reseller account within
// the advertising system. This must contain the same value used in
// transactions, specifically the publisher_id field in the Google
// protocol. Should be limited to 64 characters in length.
optional string seller_identifier = 2;
// Indicates whether this node will be involved in the flow of payment for
// the inventory. When set to true, the advertising system in the
// advertising_system_identifier field pays the seller in the
// seller_identifier field, who is responsible for paying the previous
// node in the chain. When set to false, this node is not involved in the
// flow of payment for the inventory.
optional bool handles_payment = 6;
}
// Array of SupplyChainNode objects in the order of the chain. In a complete
// supply chain, the first node represents the initial advertising system
// and seller ID involved in the transaction, for example, the owner of the
// site, app, or other medium. In an incomplete supply chain, it represents
// the first known node. The last node represents the entity sending this
// bid request.
repeated SupplyChainNode nodes = 2;
// Version of the supply chain specification in use, in the format of
// "major.minor". For example, for version 1.0 of the spec, use the string
// "1.0".
optional string version = 3;
}
optional SupplyChain supply_chain = 69;
// Experimental feature; may be subject to change. See
// https://support.google.com/authorizedbuyers/answer/10890762 for more
// information.
//
// Describes the scope of frequency cap enforcement available for this
// request. Frequency caps to be enforced for a bid can be specified in the
// BidResponse.ad.adslot.frequency_cap field.
enum FrequencyCappingScope {
// Default value which should not be used, or which can indicate that
// frequency cap scope could not be reliably determined.
FREQUENCY_CAPPING_SCOPE_UNKNOWN = 0;
// Frequency capping based on bid response specifications is not available
// for this request. A frequency-capped bid for a bid request with no
// frequency cap availability will be filtered prior to the auction.
FREQUENCY_CAPPING_SCOPE_NONE = 1;
// Frequency capping enforcement is available across multiple sites within
// the same browser.
FREQUENCY_CAPPING_SCOPE_BROWSER = 2;
// Frequency capping enforcement is available across multiple apps on the
// device, excluding browsers.
FREQUENCY_CAPPING_SCOPE_DEVICE = 3;
// Frequency capping enforcement is available within a single app.
FREQUENCY_CAPPING_SCOPE_APP = 4;
// Frequency capping enforcement is available within a single site.
FREQUENCY_CAPPING_SCOPE_SITE = 5;
}
optional FrequencyCappingScope frequency_capping_scope = 70;
// The Digital Services Act (DSA) transparency requirements. See
// https://support.google.com/admanager/answer/14335032.
message Dsa {
// Values indicating whether DSA declarations should be included in the bid
// response and, if so, whether or not the publisher is an Online Platform
// (OP) or Very Large Online Platform (VLOP), as defined by the DSA.
enum DsaSupport {
DSA_SUPPORT_UNKNOWN = 0;
// DSA declarations are not required in the bid response.
NOT_REQUIRED = 1;
// DSA declarations are supported, but not required in the bid response.
SUPPORTED = 2;
// DSA declarations are required in the bid response.
REQUIRED = 3;
// DSA declarations are required in the bid response and the publisher is
// an OP or VLOP.
REQUIRED_BY_ONLINE_PLATFORM = 4;
}
// Indicates if DSA declarations should be included in the bid response.
// Bids where DSA declarations are required but not included will not be
// accepted.
optional DsaSupport dsa_support = 1;
// Options describing a publisher's ability to render DSA transparency
// declarations.
enum PublisherRenderingSupport {
PUBLISHER_RENDERING_SUPPORT_UNKNOWN = 0;
// Publisher can't render.
PUBLISHER_UNABLE_TO_RENDER = 1;
// Publisher could render depending on the buyer's rendering capability as
// described in the BidResponse.ad.dsa_transparency.buyer_render field.
PUBLISHER_CAN_RENDER = 2;
// Publisher will render regardless of the buyer's rendering capability as
// described in the BidResponse.ad.dsa_transparency.buyer_render field.
PUBLISHER_WILL_RENDER = 3;
}
// Indicates if the publisher will render the DSA Transparency info. This
// will signal if the publisher is able to and intends to render the icon
// or other appropriate user-facing symbol and display the DSA transparency
// info to the end user.
optional PublisherRenderingSupport publisher_rendering_support = 2;
// Options describing if a publisher requires DSA transparency declarations.
enum DataToPublisher {
DATA_TO_PUBLISHER_UNKNOWN = 0;
// Do not send transparency data.
DO_NOT_SEND = 1;
// Optional to send transparency data.
OPTIONAL = 2;
// Send transparency data.
SEND = 3;
}
// Indicates whether the bidder should provide DSA transparency declarations
// in the bid response. A publisher may need this information for audit or
// other purposes, even if they will not render the transparency
// declarations themselves.
optional DataToPublisher data_to_publisher = 3;
}
// The Digital Services Act (DSA) transparency information requirements.
optional Dsa dsa = 86;
}
// This is the message that you return in response to a BidRequest. You may
// specify zero or more ads. For each ad, you should provide an ad slot on
// which the ad can run. An ad slot is identified by the AdSlot.id from the
// BidRequest. If you do not want to bid, submit a response with no ads and
// with only the processing_time_ms set.
message BidResponse {
message Ad {
// The event notification token is sent to AdX by bidders for
// troubleshooting. AdX will include the token in real-time feedback for the
// bid. The content of the token will not be logged by AdX. AdX will ignore
// any token longer than 128 bytes.
optional bytes event_notification_token = 25;
// A unique identifier chosen by you for the creative in this response.
// This must always be set, must be limited to at most 64 bytes, and must be
// a valid UTF8 string. Every buyer_creative_id you use must always be
// associated with the same creative. This field is used to communicate
// approval statuses when issues are found. Do not specify the same id for
// different creatives, or all creatives will be disapproved if a problem
// with a single creative is found. Do not specify different ids for the
// same creative in different responses or no creatives will be served since
// approval status is assigned on a per-id basis.
optional string buyer_creative_id = 10;
// Only one of the following should be set:
// 1) html_snippet, 2) video_url, 3) native_ad, or 4) sdk_rendered_ad.
//
// The HTML snippet that will be placed on the web page to display the ad.
// Use BidResponse.Ad.AdSlot.billing_id to indicate which billing id
// this snippet is attributed to.
optional string html_snippet = 1;
// The URL to fetch a video ad. The URL should return an XML response that
// conforms to the VAST 2.0 or 3.0 standard. Use
// BidResponse.Ad.AdSlot.billing_id to indicate which billing id to
// attribute this ad to. Only one of the following should be set:
// html_snippet, video_url. Only set this field if the BidRequest is for an
// in-video ad (BidRequest.video is present).
optional string video_url = 9;
// The VAST document to be returned. This document should conform to the
// VAST 2.0 or 3.0 standard. Use BidResponse.Ad.AdSlot.billing_id to
// indicate which billing ID to attribute this ad to.
// Only set this field if the BidRequest is for an in-video ad and the
// response is VAST XML.
optional string video_vast_xml = 24;
// The URL to fetch an AMPHTML ad. Only one of the following should be set:
// html_snippet, video_url, amp_ad_url, native_ad.
optional string amp_ad_url = 23;
// The content of a native ad. Native ads consist of multiple building
// blocks, which are rendered by the publisher. Only one of the following
// should be set: html_snippet, video_url, or native_ad.
// Only set this field if the BidRequest is for a native ad
// (BidRequest.adslot.native is present).
message NativeAd {
// A video in the form of either a URL for a VAST tag, or an in-line VAST
// tag. Only set this field if VIDEO is required or recommended in the
// BidRequest's NativeAdTemplate.
oneof video {
// The URL to fetch a video ad. The URL should return an XML response
// that conforms to VAST standards.
string video_url = 13;
// The VAST document to be returned. Max size is 100kB.
string video_vast_xml = 16;
}
// A short title for the ad.
optional string headline = 1;
// A long description of the ad.
optional string body = 2;
// A label for the button that the user is supposed to click
optional string call_to_action = 3;
// The name of the advertiser or sponsor, to be displayed in the ad
// creative.
optional string advertiser = 4;
message Image {
optional string url = 1;
// Image width and height are specified in pixels. You may provide a
// larger image than was requested, so long as the aspect ratio is
// preserved.
optional int32 width = 2;
optional int32 height = 3;
}
// A large image.
optional Image image = 5;
// A smaller image, for the advertiser's logo.
optional Image logo = 6;
// The app icon, for app download ads.
optional Image app_icon = 7;
// The app rating in the app store. Must be in the range [0-5].
optional double star_rating = 8;
// The URL that the browser/SDK will load when the user clicks the ad.
// This can be the landing page directly, or the first step of a redirect
// chain that eventually leads to it. For backward compatibility, if this
// is not set, the first Ad.click_through_url is used.
optional string click_link_url = 14;
// This field is deprecated in favor of the repeated click_tracking_urls
// field at the BidResponse.Ad level. It will be removed at the end of
// Q2 2022.
// The URL to use for click tracking. The SDK pings click tracking url on
// a background thread. When resolving the url, HTTP 30x redirects are
// followed. The SDK ignores the contents of the response; this URL
// has no effect on the landing page for the user.
optional string DEPRECATED_click_tracking_url = 11 [deprecated = true];
// This field is deprecated in favor of the click_tracking_urls
// field at the BidResponse.Ad level. It will be removed at the end of
// Q2 2022.
// The URLs to use for click tracking. This will be used throughout the
// serving stack and will incorporate any URL in click_tracking_url.
repeated string DEPRECATED_click_tracking_urls = 15 [deprecated = true];
// The price of the promoted app including the currency info.
optional string price = 10;
}
optional NativeAd native_ad = 18;
// The set of destination URLs for the snippet. This includes the URLs that
// the user will go to if they click on the displayed ad, and any URLs that
// are visible in the rendered ad. Do not include intermediate calls to the
// adserver that are unrelated to the inal landing page. A BidResponse that
// returns a snippet or video ad but declares no click_through_url will be
// discarded. Only set this field if html_snippet or video_url or native_ad
// are set. This data is used as a destination URL declaration, for example
// for post-filtering of publisher-blocked URLs or ad categorization.
//
// For non-native ads, it is not used for click tracking or any
// other ad functionality; it is only used as a destination URL
// declaration.
//
// For native ads, if NativeAd.click_link_url is not set, the first
// value of click_through_url is used to direct the user to the landing
// page. In addition, all values are used as destination
// URL declarations (similar to the non-native case).
repeated string click_through_url = 4;
// All vendor types for the ads that may be shown from this snippet. You
// should only declare vendor ids listed in the vendors.txt file in the
// technical documentation. We will check to ensure that the vendors you
// declare are in the allowed_vendor_type list sent in the BidRequest for
// AdX publishers.
repeated int32 vendor_type = 5;
// All attributes for the ads that may be shown from this snippet. See
// buyer-declarable-creative-attributes.txt in the technical documentation
// for a list of ids. We will check to ensure none of these attributes are
// in the excluded_attribute list in the BidRequest.
repeated int32 attribute = 6;
// All sensitive categories for the ads that may be shown from this snippet.
// See ad-sensitive-categories.txt in the technical documentation for a list
// of ids. We will check to ensure none of these categories were in the
// excluded_sensitive_category list in the BidRequest.
repeated int32 category = 7;
// All restricted categories for the ads that may be shown from this
// snippet. See ad-restricted-categories.txt in the technical documentation
// for a list of ids. We will check to ensure these categories were listed
// in the allowed_restricted_category list in the BidRequest. If you are
// bidding with ads in restricted categories you MUST ALWAYS declare them
// here.
repeated int32 restricted_category = 17;
// All names of the ad's advertisers.
repeated string advertiser_name = 11;
// The width and the height in pixels of the ad. Setting these is optional.
// However, these must be set if the bid BidRequest.AdSlot has more than one
// width and height or if BidRequest.Mobile.is_interstitial_request is true.
optional int32 width = 14;
optional int32 height = 15;
message AdSlot {
// The slot id from the BidRequest that the ad may appear in.
required int32 id = 1;
// The maximum CPM you want to be charged if you win the auction for this
// ad slot, expressed in micros of the specified currency or default
// bidding currency. For example, to bid a CPM of 1.29 USD, set
// max_cpm_micros = 1290000. Winning bids are rounded up to billable
// units. For example, in USD, bids are rounded up to the next multiple
// of 10,000 micros (one cent).
required int64 max_cpm_micros = 2;
// The minimum CPM you want to be charged if you win the auction for this
// ad slot, expressed in micros of the specified currency or default
// bidding currency. This may represent a second price if you choose
// max_cpm_micros as the highest of several bids, or some form of reserve
// price if you want to override the reserve price set by the publisher.
// The bid must be less than or equal to max_cpm_micros or it will be
// ignored. This field is optional and does not need to be set. This
// field is not applicable when responding to bid requests with
// auction_type set to FIRST_PRICE.
optional int64 min_cpm_micros = 3;
// The currency used by max_cpm_micros and min_cpm_micros, using ISO-4217
// alpha codes. If this field is populated, the specified currency will
// be used to interpret the bid. Otherwise, the default bidding currency
// will be used, which is determined in the following priority:
// 1. The bidder-level currency, if configured in RTB account settings.
// 2. The buyer-level currency. The buyer will be determined by the
// billing ID specified in the billing_id field of the bid response if it
// is populated, otherwise it will be based on the sole billing ID sent
// in the bid request.
//
// The currency of a buyer account is set on account creation and can be
// checked by contacting a Technical Account Manager.
optional string currency = 15;
// Billing id to attribute this impression to. The value must be in the
// set of billing ids for this slot that were sent in the
// BidRequest.AdSlot.matching_ad_data.billing_id. This must always be set
// if the BidRequest has more than one
// BidRequest.AdSlot.matching_ad_data.billing_id or if the bidder has
// active child seats.
optional int64 billing_id = 4;
// The deal id that you want this bid to participate in. Leave unset
// or set it to "1" if a deal is available but you want to
// ignore the deal and participate in the open auction.
optional int64 deal_id = 5 [default = 0];
// For exchange bidders (third party exchanges doing real-time bidding on
// DFP), the deal id from the exchange's namespace that is associated with
// this bid and reported to publishers. Leave unset if there is no
// associated deal. This is arbitrary UTF8 text and must be at most 64
// bytes.
optional string exchange_deal_id = 6;
// When exchange_deal_id is set, the type of deal. This is reported to
// publishers and affects how the deal is treated in the auction.
enum ExchangeDealType {
OPEN_AUCTION = 0;
PRIVATE_AUCTION = 1;
PREFERRED_DEAL = 2;
EXCHANGE_AUCTION_PACKAGE = 3;
}
optional ExchangeDealType exchange_deal_type = 7 [default = OPEN_AUCTION];
// The seat ID in the bidder's namespace representing the seat on whose
// behalf this bid was made.
optional string seat_id = 25;
// Buyer declared ID which will be used to break down spend and invalid
// traffic metrics in IVT transparency reporting in Query Tool. Note that
// IDs with fewer than 1000 impressions will not be used to break down
// metrics. IDs longer than 64 bytes will be ignored.
optional string buyer_reporting_id = 8;
// Token used to identify end third party buyer information if an
// exchange as an open bidder is an intermediary. This is obtained from
// the third party buyer and must be passed to Google unaltered in the bid
// response.
optional string third_party_buyer_token = 12;
// Experimental feature; may be subject to change. See
// https://support.google.com/authorizedbuyers/answer/10890762 for more
// information.
//
// Specifies frequency capping to be applied to the bid. Impressions for
// each user are capped at the level specified by frequency_cap_id. A bid
// will not participate in the auction if an additional impression for the
// user would violate any of the specified caps. Multiple frequency caps
// can be specified for the same frequency_cap_id.
//
// A bid is filtered before the auction if the frequency cap is malformed.
// Instances where the cap is malformed include:
// - frequency_cap_id is empty or is very long
// - max_mpressions or time_range are non-positive
// - there are a large number of frequency caps for a single bid
// - time_unit is not specified
//
// Note that if a subsequent bid with the same frequency_cap_id uses a
// different duration (represented by time_unit and time_range) then
// impressions counted against the old frequency cap will not count
// against the new one, and the impressions counted against the new
// frequency cap with a different time_unit and time_range will not count
// against the old frequency cap..
message FrequencyCap {
// An ID that can represent a bidder's use-case for frequency capping.
// For example, it could represent their campaign, ad, line item, or
// some other entity. It should not contain any user-specific
// information or identifiers and should not be longer than 64
// characters.
optional string frequency_cap_id = 1;
// The time units for which frequency caps can be enforced.
enum TimeUnit {
UNKNOWN_TIME_UNIT = 0;
MINUTE = 1;
DAY = 2;
WEEK = 3;
MONTH = 4;
// When INDEFINITE is used, time_range will be ignored. INDEFINITE
// means the frequency cap will be applied for a long period of time,
// (longer than a month) but not necessarily forever.
INDEFINITE = 5;
}
// The unit of time used to specify the time window for which a
// frequency cap applies.
optional TimeUnit time_unit = 2;
// The length of the time window, in units specified by time_unit, for
// which the frequency cap applies. For instance, if time_unit=WEEK and
// time_range=3, then capping is applied for a three week period. If the
// time_unit=INDEFINITE, this will be ignored.
optional int32 time_range = 3 [default = 1];
// The maximum number of impressions allowed to be shown to a user for
// the provided frequency_cap_id within the time window described by
// time_unit and time_range.
optional int32 max_impressions = 4;
}
repeated FrequencyCap frequency_cap = 16;
// Position within the pod.
enum PodPosition {
// Any position in the pod.
POD_POSITION_ANY = 0;
// Last position in the pod.
POD_POSITION_LAST = 1;
// First position in the pod.
POD_POSITION_FIRST = 2;
// First or last position in the pod.
POD_POSITION_FIRST_OR_LAST = 3;
}
// Indicates that the bid is only eligible
// for a specific position within the pod.
optional PodPosition position_in_pod = 22;
// All bids with the same bid_group_id will be won or lost as a group.
// Bids must have a non-empty bid_group_id to allow an ad to be played
// as part of a pod.
// This field is currently only supported for rewarded video pods
// requests. If an ad is submitted on multiple positional bids
// represented by AdSlot messages, each bid (AdSlot message)
// must have a different bid_group_id.
// For example, if a bidder wants to bid ad_1 for first position
// and last position in the pod and ad_2 for any position and
// want to ensure either both win at the same time or neither of those
// wins, bidder needs to submit:
// ad {
// buyer_creative_id: "ad_1",
// adslot {
// position_in_pod: POD_POSITION_FIRST,
// bid_group_id: "group1"
// },
// adslot {
// position_in_pod: POD_POSITION_LAST,
// bid_group_id: "group2"
// }
// },
// ad {
// buyer_creative_id: "ad_2",
// adslot {
// position_in_pod: POD_POSITION_ANY,
// bid_group_id: "group1"
// },
// adslot {
// position_in_pod: POD_POSITION_ANY,
// bid_group_id: "group2"
// }
// }
optional string bid_group_id = 23;
}
repeated AdSlot adslot = 3;
// The URLs to call when the impression is rendered. This is supported for
// all inventory types and all formats.
repeated string impression_tracking_url = 19;
// The URLs to call when the user clicks on the ad. Currently supported only
// for native ads and Programmatic Guaranteed deals with publisher-
// managed creatives. In the publisher managed case, these click trackers
// will be sent to the bidder server to server. In all other cases, these
// will be sent from the user's device. For more information on
// publisher-managed creatives, see
// https://support.google.com/admanager/answer/9243220.
repeated string click_tracking_urls = 30;
// Link to ad preferences page. This is only supported for native ads.
// If present, a standard AdChoices icon is added to the native creative and
// linked to this URL.
optional string ad_choices_destination_url = 21;
message ImpressionTrackingResource {
// The URL of a Javascript resource. The URLs should not contain script
// tags. For example: "https://mycdn.com/tracker.js".
optional string script_url = 1;
// Additional context provided for rendering.
enum Context {
UNKNOWN_CONTEXT = 0;
// Currently not supported.
OMID = 1;
}
repeated Context context = 2;
// Parameters associated with the resource that will be passed to the
// resource when it is loaded. The format of the parameters is dependent
// on the script vendor.
optional string verification_parameters = 3;
// Used to uniquely identify the verification script provider.
optional string vendor_key = 4;
}
// Resources to invoke when the impression is rendered. This is supported
// for native and banner formats only and explicitly allowed scripts
// only.
repeated ImpressionTrackingResource impression_tracking_resource = 26;
// An ad that will be rendered by an SDK known to the buyer. This can only
// be used when the BidRequest included a mobile.installed_sdk submessage.
message SdkRenderedAd {
// The identifier for the SDK that will render the ad. Must match a
// mobile.installed_sdk.id sent in the corresponding bid request.
optional string id = 1;
// Data to pass to the SDK in order to render the ad. This data is opaque
// to the publisher and to Google.
optional string rendering_data = 2;
// Declared ad assets to support creative scanning, classification, and
// enforcement of ad policy and publisher blocks for ads rendered with a
// custom SDK.
message DeclaredAd {
// Ad content used by SDK to render an ad.
oneof content {
// The HTML snippet representative of the SDK-rendered ad.
string html_snippet = 1;
// The URL to the VAST asset used in the SDK-rendered ad.
string video_url = 2;
// The VAST document used to render custom SDK-rendered ad. This
// document should conform to the VAST 2.0 or 3.0 standard.
string video_vast_xml = 5;
// The content of a native ad. Native ads consist of multiple building
// blocks (such as image and text), which are rendered by the buyer
// SDK.
NativeAd native_ad = 6;
}
// The final landing pages of the SDK-rendered ad.
repeated string click_through_url = 4;
}
optional DeclaredAd declared_ad = 6;
}
optional SdkRenderedAd sdk_rendered_ad = 27;
// Advertiser's SKAdNetwork information to support app installation
// attribution for iOS 14 and later. Apple's SKAdNetwork API helps
// advertisers measure ad-driven app installation by sending a postback
// to the ad network after a successful install. Ad networks will need
// to send their network ID and signed advertiser information to allow
// an install to be attributed to the ad impression.
// For more info visit:
// https://developer.apple.com/documentation/storekit/skadnetwork
message SKAdNetworkResponse {
// Version of SKAdNetwork supported by the advertiser. Also used to
// specify how the signature was generated by the advertiser. This
// should match the version from BidRequest.mobile.skad.version.
optional string version = 1;
// Ad network identifier used in signature. This should match one of the
// items in BidRequest.mobile.skad.skadnetids.
optional string network = 2;
// Campaign ID compatible with Apple's spec. Used in SKAdNetwork 3.0 and
// below. Replaced by Source Identifier (`source_identifier` field) in
// SKAdNetwork 4.0 and above.
optional int64 campaign = 3;
// A four-digit integer that ad networks define to represent the ad
// campaign. Used in SKAdNetwork 4.0+ and replaces the `campaign` field.
optional int64 source_identifier = 11;
// ID of advertiser's app in Apple's app store.
optional string itunesitem = 4;
// ID of custom product page to display (for iOS 15 or later).
// If not specified, default product page will be displayed.
// See https://developer.apple.com/app-store/custom-product-pages/
// for more details about custom product pages.
optional string product_page_id = 12;
// SKAdNetwork API starting from version 2.2 supports multiple ad
// presentation options specified by the `fidelity-type` parameter of the
// SKAdNetwork signature. This holds parameters used to generate the
// signature that would be different for each fidelity type supported.
// For more info visit:
// https://developer.apple.com/documentation/storekit/skadnetwork/signing_and_providing_ads
message Fidelity {
// The fidelity type of the attribution to track.
optional SKAdNetworkFidelityType fidelity_type = 1 [default =
STOREKIT_RENDERED_ADS];
// A unique all-lowercase UUID generated by the advertiser to use for
// generating the signature.
optional string nonce = 2;
// Unix time in millis used at the time of signature generation.
optional int64 timestamp = 3;
// SKAdNetwork signature as specified by Apple.
optional string signature = 4;
}
repeated Fidelity fidelities = 9;
// A unique all-lowercase UUID generated by the advertiser to use for
// generating the signature.
// Note: This field will be deprecated in favor of the
// BidResponse.ad.skadn.fidelities.nonce field to support multiple
// fidelity types.
optional string nonce = 5;
// ID of publisher's app in Apple's app store. This should match the ID
// from BidRequest.mobile.skad.sourceapp.
optional string sourceapp = 6;
// Unix time in millis used at the time of signature generation.
// Note: This field will be deprecated in favor of the
// BidResponse.ad.skadn.fidelities.timestamp field to support multiple
// fidelity types.
optional int64 timestamp = 7;
// SKAdNetwork signature as specified by Apple.
// Note: This field will be deprecated in favor of the
// BidResponse.ad.skadn.fidelities.signature field to support multiple
// fidelity types.
optional string signature = 8;
// These options indicate how to present SKOverlay recommending the
// advertised app.
// Supported by iOS 14 and later.
//
// For more info visit:
// https://developer.apple.com/documentation/storekit/skoverlay
message SKOverlay {
// Delay in seconds after the ad begins before presenting the overlay.
// If this field is set to 0, the overlay will be shown immediately
// after the ad begins. If this field is unset, the overlay will not
// be shown for the ad.
optional int32 delay_seconds = 1;
// Delay in seconds after the endcard shows before presenting the
// overlay. (This field only applies to rewarded or interstitial video
// creatives.) If this field is set to 0, the overlay will be shown
// immediately after the endcard shows. If this field is unset,
// the overlay will not be shown for the endcard.
// If both `delay_seconds` and `endcard_delay_seconds` are set,
// the overlay will be automatically dismissed when the ad ends,
// and shown again after the endcard shows.
optional int32 endcard_delay_seconds = 2;
// Whether this overlay can be dismissed by the user.
optional bool dismissible = 3 [default = true];
}
optional SKOverlay skoverlay = 13;
// Google Mobile Ads SDK options for SKAdNetwork handling.
message SKAdNetworkOptions {
// By default, SKAdNetwork attribution will only be initiated if the
// click-through URL lands on the app store, either as a direct link to
// the app store or as the final destination of a server-side redirect
// chain. Enables GMA SDK to always initiate SKAdNetwork
// attribution on-click regardless of the detected click's final
// destination URL. Note that enabling this will launch the app store
// even for clicks that are not meant to open the app store, for example
// clicks on Ad Choices icon. For more info, see:
// https://developers.google.com/authorized-buyers/rtb/skadnetwork
optional bool always_open_appstore = 1 [default = false];
}
optional SKAdNetworkOptions skadn_options = 10;
}
optional SKAdNetworkResponse skadn = 29;
// ID of the advertised app (only for app promotion).
// On Android, this should be a bundle or package name such as
// com.foo.mygame. On iOS, it is a numeric ID.
//
// In addition to this field, set the app_promotion_type field below to take
// advantage of features specific to app promotion types.
optional string advertised_app_id = 32;
// Possible types of app promotion.
enum AppPromotionType {
UNKNOWN_APP_PROMOTION_TYPE = 0;
// For encouraging new users to download and install the advertised app.
// Clicking this ad will show the app store listing as an overlay (for
// supported formats), without leaving the publisher app.
// Click through URL for this ad points to the app store listing.
INSTALLS = 1;
// Other types of app promotion that do not fall into the categories
// above. No features specific to app promotion types will apply.
OTHER = 3;
}
// Type of the app promotion corresponding to the advertised app specified
// in the advertised_app_id field above.
// If the advertised app is not specified, this field will be ignored.
//
// Setting advertised_app_id field without this field will be treated as if
// this field were set to OTHER.
optional AppPromotionType app_promotion_type = 33;
// DSA Ad Transparency declarations. See
// https://support.google.com/admanager/answer/14335032.
message DsaTransparency {
// Free text string describing the name of the advertiser on whose behalf
// the ad is shown. Bids will not be accepted if this value is longer
// than 100 characters.
optional string displayed_on_behalf = 1;
// Free text string describing the advertiser who paid for the ad. Must
// always be included even if it's the same as what is listed in the
// displayed_on_behalf attribute. Bids will not be accepted if this value
// is longer than 100 characters.
optional string paying_entity = 2;
// Indicates that the buyer will render their own DSA transparency
// information inside the creative.
optional bool buyer_render = 3;
}
// DSA Ad Transparency information provided by the buyer.
optional DsaTransparency dsa_transparency = 39;
}
repeated Ad ad = 2;
// If is_test was set in the BidRequest, then you may return debug information
// as plain text in this field. Don't set this field under normal
// conditions, or set it to values longer than 100 characters. You should only
// use this field when asked to do so as part of troubleshooting particular
// problems.
optional string debug_string = 5;
// Set this to the processing time in milliseconds from when you
// received the request to when you returned the response.
optional int32 processing_time_ms = 4;
// An optional, bidder-specified reason for not submitting a bid. This field
// is equivalent to BidResponse.nbr in the OpenRTB protocol and uses the same
// namespace of no-bid reason codes. See
// https://developers.google.com/authorized-buyers/rtb/downloads/no-bid-reasons.txt
// for the full set of no-bid reason codes.
optional int32 no_bid_reason = 6;
}
// SKAdNetwork API starting from version 2.2 supports multiple ad
// presentation options specified by the `fidelity-type` parameter of the
// SKAdNetwork signature. The following are the fidelity types supported by
// Apple. For more info visit:
// https://developer.apple.com/documentation/storekit/skadnetwork/signing_and_providing_ads
enum SKAdNetworkFidelityType {
// Attribution for app installs within 24 hours of viewing an ad for at least
// 3 seconds. Supported for SKAdnetwork version 2.2 and up. For more info see:
// https://developer.apple.com/documentation/storekit/skadnetwork/generating_the_signature_to_validate_view-through_ads
VIEW_THROUGH_ADS = 0;
// Attribution for app installs initiated from the StoreKit-rendered App Store
// product page driven by ad clicks. Supported for all SKAdNetwork versions.
// For more info see:
// https://developer.apple.com/documentation/storekit/skadnetwork/generating_the_signature_to_validate_storekit-rendered_ads
STOREKIT_RENDERED_ADS = 1;
}
از این پیام، اولین فیلدی که باید بررسی کنید bid_response_feedback.creative_status_code است. می توانید معنی کد را در creative-status-codes.txt پیدا کنید. توجه داشته باشید که در صورت برنده شدن در مناقصه، می توانید از بازخورد قیمت انصراف دهید. برای اطلاعات بیشتر، نحوه انصراف را ببینید.
بازخورد بلادرنگ شامل شناسه درخواست پیشنهاد و یکی از موارد زیر است:
نتیجه حراج
بازخورد در زمان واقعی
خریدار پیشنهادی ارائه نکرده است.
هیچ چی.
خریدار پیشنهادی را ارسال کرد که قبل از رسیدن به حراج فیلتر شد.
پس از ارائه یک پیشنهاد در یک حراج قیمت اول، در صورتی که پیشنهاد از حراج فیلتر نشده باشد، بازخورد بلادرنگی از جمله فیلدهای minimum_bid_to_win و sampled_mediation_cpm_ahead_of_auction_winner دریافت خواهید کرد. این سیگنالها میتوانند برای اطلاع دادن به منطق پیشنهادی شما در مورد اینکه قیمت پیشنهادی شما چقدر بالاتر یا پایینتر بوده است به منظور برنده شدن تأثیر استفاده میشوند.
minimum_bid_to_win : حداقل پیشنهادی که میتوانست برای برنده شدن در مزایده مناقصه بیدرنگ ارائه شود. اگر در حراج برنده شدید، این کمترین پیشنهادی خواهد بود که می توانستید در حالی که هنوز برنده هستید، ارائه دهید. اگر حراج را باختید، این پیشنهاد برنده خواهد بود.
sampled_mediation_cpm_ahead_of_auction_winner : اگر شبکههای دیگری در زنجیره میانجیگری وجود داشته باشد، ارزش این فیلد قیمتی است که نشاندهنده پیشنهاد نمونه از یکی از شبکههای واجد شرایط میانجیگری است که بالاتر از برنده مزایده بود، وزن آن بر اساس نرخ پر شدن مورد انتظار. اگر انتظار می رود هیچ یک از شبکه های زنجیره میانجی پر نشود، یا اگر ناشر از میانجیگری SDK استفاده نکند، این روی 0 تنظیم می شود.
چگونه کار می کند
برای توصیف محاسبات مورد استفاده برای تعیین مقادیر ممکن برای minimum_bid_to_win و sampled_mediation_cpm_ahead_of_auction_winner ، ابتدا باید موارد زیر را تعریف کنیم:
موارد زیر CPM ها را در زنجیره میانجی به ترتیب نزولی نشان می دهد:
\[C_1, C_2, …, C_n\]
موارد زیر نرخ پر شدن مربوطه را برای CPM ها در زنجیره میانجی نشان می دهد:
\[f_1, f_2, …, f_n\]
تابع زیر برای تعیین CPM مورد انتظار و احتمال آن از عنصر زنجیره میانجی \(i\)بر اساس نرخ پر شدن داده شده استفاده می شود:
\(X_i = \{C_i\) با احتمال \(f_i\); \(0\) با احتمال \(1 - f_i\}\)
زنجیره میانجی برنده نهایی این خواهد بود:
\[\{C_1, C_2, …, C_K, W\}\]
جایی که \(W\) پیشنهاد برنده است و \(C_K > W >= C_{K+1}\)
فرض کنید یک ناشر از مناقصه بلادرنگ و زنجیره میانجی SDK به شرح زیر استفاده می کند:
زنجیره میانجی SDK
CPM مورد انتظار
نرخ پر
شبکه 1
\(C_1 = $3.00\)
\(f_1 = 5\%\)
شبکه 2
\(C_2 = $2.00\)
\(f_2 = 45\%\)
شبکه 3
\(C_3 = $0.50\)
\(f_3 = 80\%\)
شبکه 4
\(C_4 = $0.10\)
\(f_4 = 85\%\)
موارد زیر را به عنوان نتیجه حراج RTB فرض کنید:
حراج RTB
CPM
برنده حراج (W)
1.00 دلار
نایب قهرمان حراج (R)
0.05 دلار
قیمت رزرو / طبقه (F)
$0
پیشنهادی که برنده مزایده شد
در زیر مثالی از نحوه محاسبه مقادیر و احتمالات برای minimum_bid_to_win و sampled_mediation_cpm_ahead_of_auction_winner برای پیشنهادی است که برنده شده است.
در زیر نمونهای از نحوه محاسبه مقادیر و احتمالات برای minimum_bid_to_win و sampled_mediation_cpm_ahead_of_auction_winner برای مناقصههایی است که باختند.
Bid Flattening پردازش یک BidRequest منفرد را به چندین درخواست پیشنهادی که به درخواست شما ارسال می شود، توصیف می کند. از آنجایی که آنها شناسههای یکسانی را حفظ میکنند ( BidRequest.google_query_id در پروتکل RTB خریداران مجاز یا BidRequestExt.google_query_id در پروتکل OpenRTB)، میتوانید تعیین کنید که کدام درخواستهای پیشنهادی پس از مسطح کردن، مرتبط هستند.
فرمت های تبلیغاتی
برخی از فرصت های تبلیغاتی می توانند چندین قالب را بپذیرند. با یکنواخت کردن پیشنهاد، هر قالب در یک درخواست پیشنهادی مجزا ارسال میشود که در آن ویژگیهایی مانند شناسههای صورتحساب واجد شرایط با قالب مشخصشده در درخواست مرتبط هستند.
درخواستهای پیشنهادی حاوی فرمتهای زیر به درخواستهای پیشنهادی مجزا تبدیل میشوند:
بنر
ویدئو
سمعی
بومی
مثال صاف کردن قالب تبلیغات
در زیر مثالی نشان میدهد که یک درخواست پیشنهادی OpenRTB JSON ساده شده را بدون صاف کردن قالب آگهی در مقایسه با مجموعهای معادل از درخواستهای مسطح نشان میدهد:
یک فرصت تبلیغاتی برای یک مناقصهدهنده میتواند برای انواع مختلف معاملات، علاوه بر حراج آزاد، قابل استفاده باشد. با یکنواخت شدن پیشنهاد برای معاملات، یک درخواست پیشنهاد برای حراج آزاد و یک درخواست برای هر نوع معامله با قیمت ثابت ارسال می شود. در عمل، محدودیتهای تبلیغاتی میتواند بین انواع حراجها و انواع معاملات با قیمت ثابت متفاوت باشد، به عنوان مثال، برای یک فرصت تبلیغ ویدیویی معین که هم برای حراج آزاد و هم برای یک معامله با قیمت ثابت در دسترس است، یک پیشنهاد دهنده درخواستهای پیشنهادی مجزایی را برای هر جایی دریافت میکند. محدودیتهایی مانند حداکثر مدت زمان تبلیغ و اینکه آیا تبلیغات قابل رد شدن مجاز هستند یا نه، میتوانند متفاوت باشند. در نتیجه، هموارسازی اعمال شده در فرصت تبلیغات به شما امکان میدهد به راحتی محدودیتهای تبلیغاتی برای حراج آزاد و معامله با قیمت ثابت را تشخیص دهید.
حداکثر مدت زمان ویدیو قابل رد شدن
پروتکل Google و اجرای OpenRTB از فیلدهای زیر برای مدت زمان و قابلیت رد شدن ویدیو پشتیبانی می کند:
مدت زمان
مدت زمان قابل رد شدن
قابلیت پرش
پروتکل گوگل
max_ad_duration
skippable_max_ad_duration
video_ad_skippable
OpenRTB
maxduration
n/a
skip
این به این معنی است که در حالی که پروتکل Google می تواند یک مدت زمان گرانول قابل پرش و غیرقابل رد شدن داشته باشد، پیاده سازی OpenRTB تنها دارای یک مقدار حداکثر مدت زمان است.
قبل از صاف کردن قیمت پیشنهادی، maxduration OpenRTB روی قسمت پایینترین قسمت max_ad_duration و skippable_max_ad_duration پروتکل Google تنظیم میشود. این رفتار اکنون به ارسال دو درخواست پیشنهاد جداگانه در زمانی که این مقادیر متفاوت هستند تغییر کرده است: یکی نشان دهنده maxduration برای فرصت های قابل رد شدن و دیگری برای فرصت های غیر قابل رد شدن است.
مثالهای زیر نشان میدهند که چگونه یک درخواست پروتکل Google قبل و بعد از صاف کردن پیشنهاد به OpenRTB ترجمه میشود. درخواست پروتکل معادل Google دارای max_ad_duration15 و skippable_max_ad_duration60 است.
مثال
max_ad_duration
skip (درست یا نادرست)
درخواست اصلی بدون صاف کردن
15
true
درخواست مسطح شماره 1: غیر قابل رد شدن
15
false
درخواست مسطح شماره 2: قابل گذشت
60
true
صاف کردن درخواست مدت زمان ویدیوی قابل رد شدن فقط زمانی انجام می شود که این شرایط رعایت شود:
درخواست اجازه ویدیو را می دهد.
هر دو ویدیوی پرش و بدون پرش مجاز هستند و دو مدت زمان حداکثر مربوطه از نظر ارزش متفاوت هستند.
این درخواست برای حراج خصوصی یا حراج باز واجد شرایط است.
حساب پیشنهاد دهنده دارای نقاط پایانی OpenRTB فعال است.
می توانید با تماس با مدیر حساب فنی خود از این نوع صاف کردن انصراف دهید.
غلاف های ویدیویی
درخواستهای پیشنهاد برای یک غلاف ویدیویی با فرصتهای تبلیغاتی متعدد، مسطح میشوند، بهطوریکه هر درخواست پیشنهاد برای یک فرصت آگهی جداگانه از آن غلاف است. این به شما امکان میدهد برای چند فرصت تبلیغاتی برای یک غلاف معین پیشنهاد بدهید.
باز کردن اندازهگیری
Open Measurement به شما امکان میدهد فروشندههای شخص ثالثی را مشخص کنید که خدمات اندازهگیری و تأیید مستقلی را برای تبلیغات ارائهشده در محیطهای برنامه تلفن همراه ارائه میکنند.
میتوانید با بررسی اینکه آیا فرصت آگهی ویژگی OmsdkType: OMSDK 1.0 موجود در ویژگیهای خلاق قابل استثناء ناشر را در نظر نمیگیرد، تعیین کنید که آیا ناشر از اندازهگیری باز در درخواست پیشنهاد قیمت پشتیبانی میکند یا خیر. برای پروتکل خریداران مجاز، این را می توان در زیر BidRequest.adslot[].excluded_attribute پیدا کرد. برای پروتکل OpenRTB، این بسته به فرمت، در زیر ویژگی battr برای بنر یا ویدیو یافت می شود.
برای اطلاعات بیشتر درباره نحوه تفسیر درخواستهای پیشنهادی حاوی سیگنالهای اندازهگیری باز، به مقاله مرکز راهنمای Open Measurement SDK مراجعه کنید.
نمونه درخواست های پیشنهادی
بخش های زیر نمونه درخواست های پیشنهادی برای انواع مختلف تبلیغات را نشان می دهد.