เอกสารประกอบของ WebP API

decode.h
encode.h
types.h

#include "webp/decode.h"
int WebPGetInfo(const uint8_t* data, size_t data_size, int* width, int* height);

struct WebPBitstreamFeatures {
  int width;          // Width in pixels.
  int height;         // Height in pixels.
  int has_alpha;      // True if the bitstream contains an alpha channel.
  int has_animation;  // True if the bitstream is an animation.
  int format;         // 0 = undefined (/mixed), 1 = lossy, 2 = lossless
}

VP8StatusCode WebPGetFeatures(const uint8_t* data,
                              size_t data_size,
                              WebPBitstreamFeatures* features);

uint8_t* WebPDecodeRGBA(const uint8_t* data, size_t data_size, int* width, int* height);
uint8_t* WebPDecodeARGB(const uint8_t* data, size_t data_size, int* width, int* height);
uint8_t* WebPDecodeBGRA(const uint8_t* data, size_t data_size, int* width, int* height);
uint8_t* WebPDecodeRGB(const uint8_t* data, size_t data_size, int* width, int* height);
uint8_t* WebPDecodeBGR(const uint8_t* data, size_t data_size, int* width, int* height);

uint8_t* WebPDecodeRGBAInto(const uint8_t* data, size_t data_size,
                            uint8_t* output_buffer, int output_buffer_size, int output_stride);
uint8_t* WebPDecodeARGBInto(const uint8_t* data, size_t data_size,
                            uint8_t* output_buffer, int output_buffer_size, int output_stride);
uint8_t* WebPDecodeBGRAInto(const uint8_t* data, size_t data_size,
                            uint8_t* output_buffer, int output_buffer_size, int output_stride);
uint8_t* WebPDecodeRGBInto(const uint8_t* data, size_t data_size,
                           uint8_t* output_buffer, int output_buffer_size, int output_stride);
uint8_t* WebPDecodeBGRInto(const uint8_t* data, size_t data_size,
                           uint8_t* output_buffer, int output_buffer_size, int output_stride);

#include "webp/decode.h"

WebPDecoderConfig config;
CHECK(WebPInitDecoderConfig(&config));

// One can adjust some additional decoding options:
config.options.no_fancy_upsampling = 1;
config.options.use_scaling = 1;
config.options.scaled_width = scaledWidth();
config.options.scaled_height = scaledHeight();
// etc.

struct WebPDecoderOptions {
  int bypass_filtering;             // if true, skip the in-loop filtering
  int no_fancy_upsampling;          // if true, use faster pointwise upsampler
  int use_cropping;                 // if true, cropping is applied first 
  int crop_left, crop_top;          // top-left position for cropping.
                                    // Will be snapped to even values.
  int crop_width, crop_height;      // dimension of the cropping area
  int use_scaling;                  // if true, scaling is applied afterward
  int scaled_width, scaled_height;  // final resolution
  int use_threads;                  // if true, use multi-threaded decoding
  int dithering_strength;           // dithering strength (0=Off, 100=full)
  int flip;                         // if true, flip output vertically
  int alpha_dithering_strength;     // alpha dithering strength in [0..100]
};

CHECK(WebPGetFeatures(data, data_size, &config.input) == VP8_STATUS_OK);

// Specify the desired output colorspace:
config.output.colorspace = MODE_BGRA;
// Have config.output point to an external buffer:
config.output.u.RGBA.rgba = (uint8_t*)memory_buffer;
config.output.u.RGBA.stride = scanline_stride;
config.output.u.RGBA.size = total_size_of_the_memory_buffer;
config.output.is_external_memory = 1;

CHECK(WebPDecode(data, data_size, &config) == VP8_STATUS_OK);

WebPIDecoder* idec = WebPINewDecoder(&config.output);
CHECK(idec != NULL);
while (additional_data_is_available) {
  // ... (get additional data in some new_data[] buffer)
  VP8StatusCode status = WebPIAppend(idec, new_data, new_data_size);
  if (status != VP8_STATUS_OK && status != VP8_STATUS_SUSPENDED) {
    break;
  }
  // The above call decodes the current available buffer.
  // Part of the image can now be refreshed by calling
  // WebPIDecGetRGB()/WebPIDecGetYUVA() etc.
}
WebPIDelete(idec);  // the object doesn't own the image memory, so it can
                    // now be deleted. config.output memory is preserved.

WebPFreeDecBuffer(&config.output);

size_t WebPEncodeRGB(const uint8_t* rgb, int width, int height, int stride, float quality_factor, uint8_t** output);
size_t WebPEncodeBGR(const uint8_t* bgr, int width, int height, int stride, float quality_factor, uint8_t** output);
size_t WebPEncodeRGBA(const uint8_t* rgba, int width, int height, int stride, float quality_factor, uint8_t** output);
size_t WebPEncodeBGRA(const uint8_t* bgra, int width, int height, int stride, float quality_factor, uint8_t** output);

size_t WebPEncodeLosslessRGB(const uint8_t* rgb, int width, int height, int stride, uint8_t** output);
size_t WebPEncodeLosslessBGR(const uint8_t* bgr, int width, int height, int stride, uint8_t** output);
size_t WebPEncodeLosslessRGBA(const uint8_t* rgba, int width, int height, int stride, uint8_t** output);
size_t WebPEncodeLosslessBGRA(const uint8_t* bgra, int width, int height, int stride, uint8_t** output);

struct WebPConfig {
  int lossless;           // Lossless encoding (0=lossy(default), 1=lossless).
  float quality;          // between 0 and 100. For lossy, 0 gives the smallest
                          // size and 100 the largest. For lossless, this
                          // parameter is the amount of effort put into the
                          // compression: 0 is the fastest but gives larger
                          // files compared to the slowest, but best, 100.
  int method;             // quality/speed trade-off (0=fast, 6=slower-better)

  WebPImageHint image_hint;  // Hint for image type (lossless only for now).

  // Parameters related to lossy compression only:
  int target_size;        // if non-zero, set the desired target size in bytes.
                          // Takes precedence over the 'compression' parameter.
  float target_PSNR;      // if non-zero, specifies the minimal distortion to
                          // try to achieve. Takes precedence over target_size.
  int segments;           // maximum number of segments to use, in [1..4]
  int sns_strength;       // Spatial Noise Shaping. 0=off, 100=maximum.
  int filter_strength;    // range: [0 = off .. 100 = strongest]
  int filter_sharpness;   // range: [0 = off .. 7 = least sharp]
  int filter_type;        // filtering type: 0 = simple, 1 = strong (only used
                          // if filter_strength > 0 or autofilter > 0)
  int autofilter;         // Auto adjust filter's strength [0 = off, 1 = on]
  int alpha_compression;  // Algorithm for encoding the alpha plane (0 = none,
                          // 1 = compressed with WebP lossless). Default is 1.
  int alpha_filtering;    // Predictive filtering method for alpha plane.
                          //  0: none, 1: fast, 2: best. Default if 1.
  int alpha_quality;      // Between 0 (smallest size) and 100 (lossless).
                          // Default is 100.
  int pass;               // number of entropy-analysis passes (in [1..10]).

  int show_compressed;    // if true, export the compressed picture back.
                          // In-loop filtering is not applied.
  int preprocessing;      // preprocessing filter (0=none, 1=segment-smooth)
  int partitions;         // log2(number of token partitions) in [0..3]
                          // Default is set to 0 for easier progressive decoding.
  int partition_limit;    // quality degradation allowed to fit the 512k limit on
                          // prediction modes coding (0: no degradation,
                          // 100: maximum possible degradation).
  int use_sharp_yuv;      // if needed, use sharp (and slow) RGB->YUV conversion
};

struct WebPPicture {
  int use_argb;              // To select between ARGB and YUVA input.

  // YUV input, recommended for lossy compression.
  // Used if use_argb = 0.
  WebPEncCSP colorspace;     // colorspace: should be YUVA420 or YUV420 for now (=Y'CbCr).
  int width, height;         // dimensions (less or equal to WEBP_MAX_DIMENSION)
  uint8_t *y, *u, *v;        // pointers to luma/chroma planes.
  int y_stride, uv_stride;   // luma/chroma strides.
  uint8_t* a;                // pointer to the alpha plane
  int a_stride;              // stride of the alpha plane

  // Alternate ARGB input, recommended for lossless compression.
  // Used if use_argb = 1.
  uint32_t* argb;            // Pointer to argb (32 bit) plane.
  int argb_stride;           // This is stride in pixels units, not bytes.

  // Byte-emission hook, to store compressed bytes as they are ready.
  WebPWriterFunction writer;  // can be NULL
  void* custom_ptr;           // can be used by the writer.

  // Error code for the latest error encountered during encoding
  WebPEncodingError error_code;
};

#include "webp/encode.h"

WebPConfig config;
if (!WebPConfigPreset(&config, WEBP_PRESET_PHOTO, quality_factor)) return 0;   // version error

// Add additional tuning:
config.sns_strength = 90;
config.filter_sharpness = 6;
config.alpha_quality = 90;
config_error = WebPValidateConfig(&config);  // will verify parameter ranges (always a good habit)

// Setup the input data, allocating a picture of width x height dimension
WebPPicture pic;
if (!WebPPictureInit(&pic)) return 0;  // version error
pic.width = width;
pic.height = height;
if (!WebPPictureAlloc(&pic)) return 0;   // memory error

// At this point, 'pic' has been initialized as a container, and can receive the YUVA or RGBA samples.
// Alternatively, one could use ready-made import functions like WebPPictureImportRGBA(), which will take
// care of memory allocation. In any case, past this point, one will have to call WebPPictureFree(&pic)
// to reclaim allocated memory.

// Set up a byte-writing method (write-to-memory, in this case):
WebPMemoryWriter writer;
WebPMemoryWriterInit(&writer);
pic.writer = WebPMemoryWrite;
pic.custom_ptr = &writer;

int ok = WebPEncode(&config, &pic);
WebPPictureFree(&pic);   // Always free the memory associated with the input.
if (!ok) {
  printf("Encoding error: %d\n", pic.error_code);
} else {
  printf("Output size: %d\n", writer.size);
}